Today we typically enable CMD_SATA in order to have the SATA
functionality itself enabled, despite there being a clean split between
the two symbols. This in turn leads to potential configuration problems.
Split things so that SATA continues to be separate and not CMD_SATA
instead depends, functionally, on AHCI being enabled.
To do all of this:
- Have X86 select AHCI directly rather than "default y" it later.
- Make CMD_SATA be a default y option, given the split of platforms that
enabled SATA and did, or did not, enable CMD_SATA.
- Change "imply CMD_SATA" to "imply SATA"
- Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL
without PCI (and in turn, SATA is needed for SATA_SIL).
- Update a number of defconfigs to have no functional change.
Signed-off-by: Tom Rini <trini@konsulko.com>
It is not functionally possible to use the code enabled by
PARTITION_TYPE_GUID without having EFI_PARTITION be enabled as well. Not
all users of the former had ensured that the latter was enabled however,
so audit all current users and then as appropriate select or imply
EFI_PARTITION as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add MAINTAINERS file containing board-specific information and
the name of the board maintainer.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Introduce timing patch which converts 2 GiB DRAM timings to 4 GiB 1-rank
timings. This is a new configuration which carries IS43LQ32K01B DRAM part.
The 512 MiB SoM strapping that was never used is repurposed for this part.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The 2 GiB and 4 GiB 2-rank DRAM timings on i.MX8MP DHCOM are very
similar. Instead of carrying around two copies of almost identical
timing tables, implement a patch of the 2 GiB table to convert it
into 4 GiB 2-rank table and pass the result to DRAM initialization
code. This saves us 13640 Bytes in SPL, and frees up space for more
DRAM initialization tables.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The DRAM size tables are shared by SPL and U-Boot proper, deduplicate
those tables into lpddr4_timing.h . No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The inline ECC configuration is identical for 2 GiB DRAM variants
and 4 GiB DRAM variants of the SoM, no matter the rank count. Fold
the ECC configuration directly into spl.c to simplify the upcoming
deduplication. No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Allow CONFIG_OF_UPSTREAM to receive automatic device tree updates for
the Toradex SMARC iMX95.
Remove the now obsolete device tree files:
- imx95-toradex-smarc-dev.dts
- imx95-toradex-smarc.dtsi
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
New SoM revision use series termination for eMMC signals while older do
not. To prevent signal overshot on older revisions, DSR must be set and
limited. The eMMC type is used to differentiate between revisions.
Keep a table with all types, that are known to require DSR.
Signed-off-by: Paul Gerber <Paul.Gerber@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Update functions to use the common baseboard header and
select TQ_COMMON_BB Kconfig option for MBa6 and WRU4.
While at it, remove empty implementations that are now covered by
board/tq/common.
Signed-off-by: Paul Gerber <Paul.Gerber@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
TQMa6 and other SoMs from TQ-Systems GmbH need a baseboard. Therefore
functionality of U-Boot board callbacks may be distributed between SoM
and baseboard implementation.
To prevent code duplication and boilerplate implement a baseboard specific
API for TQ boards with weak defaults that can be filled out for baseboard
implementations as needed.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
The SoM (TQMa6) can be used on various baseboards. No modifications to
the SoM files should be required to use the SoM on different baseboards.
Therefore, include the SoM headers in the baseboard.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing
PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it
to the existing board-code "phycore_imx93", and rename that board to
"phycore_imx91_93" to reflect the dual SoCs support. While at it, also
rename and change common files accordingly. This way i.MX91 and i.MX93
SoC variants of the phyCORE SoM share most of the code and documentation
without duplication, while maintaining own device-tree and defconfigs
for each CPU variant.
Supported features:
- 1GB LPDDR4 RAM
- Debug UART
- EEPROM
- eMMC
- Ethernet
- SD-card
- USB
Product page SoM:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Emanuele Ghidoli <ghidoliemanuele@gmail.com> says:
From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
This series refactors the DDR configuration handling for the
Toradex Aquila AM69 board and adds support for a 16GB dual-rank
memory configuration, while changing the HW_CFG pins value to
DDR configurations mapping.
Link: https://lore.kernel.org/r/20260309155342.145432-1-ghidoliemanuele@gmail.com
Move the existing 16GB single-rank configuration to HW_CFG 0x03 and use
the previous HW_CFG 0x01 value for the new 16GB dual-rank configuration.
There is no hardware using the former 16GB single-rank configuration,
so reuse the HW_CFG value for the new 16GB dual-rank configuration,
which will be used in production.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
The memory controller configuration doesn't depend only on the memory
size, so refactor the code to use the memory configuration read from
the HW_CFG pin instead of the memory size.
Additionally, make use of one header file for all the memory
configurations.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
bootcmd_ti_mmc had cpsw0_qsgmii_phyinit related scripts even though this
was only relevant for the j721e/j7200 SoCs. This patch instead factors
out those scripts into a generic 'board_init' which is called as part of
bootcmd_ti_mmc.
This allows boards to more easily add custom behaviour to the ti_mmc
bootflow instead of having to modify the ti_common.env file.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Symbol CONFIG_SPL_BINMAN_FDT does not exist.
Don't select it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@at.abb.com>
Tested-by: Wolfgang Wallner <wolfgang.wallner@at.abb.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260225063559.47481-1-heinrich.schuchardt@canonical.com
Currently, U-Boot fails with an FDT patching error if the LG Optimus 2X
device tree lacks a panel node. Since the panel is optional hardware,
patching should be optional as well. Fix this by allowing bootflow to
continue if the panel node is missing.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Quentin Schulz <quentin.schulz@cherry.de> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/20251120-legacy-led-removal-v1-0-369d44338358@cherry.de
No user of the legacy LED API anymore (except Sunxi with the PinePhone
but that is now a Sunxi-specific implementation), so let's remove
anything related.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This migrates the last user of the legacy LED API, IMX233-OLinuXino, to
the modern LED framework.
The current implementation does the following:
- lit the LED when booting,
- turn off the LED the moment a BOOTP packet is received,
The first step is easily reproduced by using the
/options/u-boot/boot-led property to point at the LED. Unfortunately,
the boot-led is only lit by U-Boot proper at the very end of the boot
process, much later than currently. We can however force the LED on
whenever the GPIO LED driver is bound by marking the LED as
default-state = "on", and this happens slightly before board_init() is
called. We then do not need /options/u-boot/boot-led property for that
anymore.
However, the second step relies on /options/u-boot/boot-led and
CONFIG_LED_BOOT being set to reproduce the same behavior and requires us
to migrate net/bootp.c to the modern LED framework at the same time to
keep bisectability.
I couldn't figure out how to map CONFIG_LED_STATUS_BIT=778 to an actual
GPIO on the SoC but according to the schematics[1] only one LED is
present. I couldn't also map the SoC pin number to an actual GPIO from
the IMX23 manual, but there's already one GPIO LED specified in the
Device Tree so my guess is all of those are one and the same.
This was only build tested as I do not own this device.
[1] https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/iMX233-OLinuXino-Mini/1.%20Latest%20hardware%20revision/iMX233-OLINUXINO-MINI%20hardware%20revision%20E/iMX233-OLINUXINO-MINI_Rev_E.pdf
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
For once, replacing the legacy LED API with a more lean alternative,
just for sunxi's SPL. IIUC, this would be one step closer to dropping
this deprecated subsystem altogether.
Also adding two DRAM cleanups for the A133 SoC. There is a third patch
which requires some changes, will care about that later.
Gitlab CI passed, and I booted that briefly on an A133 board and some
board with a GPIO controlled power LED.
Bring U-Boot support for the BeagleV-Fire by adding a device tree and
supporting board files etc.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
To gain access to certain registers that are protected by GMID, the SPL
must release XSPI ownership to the current core.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The maximum length of the board name is not 11 characters
but 14: 11 bytes for the prefix + 3 bytes for the u8 + 1 NULL byte.
Hence, this commit increases the size of the name buffer variable
to 15. Also, this commit fixes the format specifier for the rev_id
variable.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Add support for i.MX952 15x15 lpddr4x board support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Change to use default board_phys_sdram_size implementation in soc.c,
which will call SM API to get DDR size.
If board has special implementation for DDR size, then board_phys_sdram_size
could be implemented in board file to override the default one in soc.c.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
We are trying to get rid of the legacy LED API and PinePhone is one of
the last ones requiring it.
Unlike all other users of the legacy LED API, PinePhone is controlling
the GPIO LED in SPL. Unfortunately, Sunxi doesn't enable DM support in
SPL because of tight space constraints, so we cannot make use of the
modern LED framework as that is based on DM_GPIO.
Since PinePhone is the last user of this API, I'm moving the logic to
Sunxi SPL code and will let this community decide how to handle this hot
potato.
The logic is extremely simplified as only one GPIO LED is currently
controlled in SPL by PinePhone. No need for handling multiple LEDs or
inverted polarity, let's keep it simple.
This however allows us to use the modern LED framework once in U-Boot
proper since this logic won't collide with the new framework.
Since the only misc drivers that were compiled in SPL were guarded by
CONFIG_LED_STATUS and CONFIG_LED_STATUS_GPIO, we can also disable
CONFIG_SPL_DRIVERS_MISC (which does nothing anymore).
This also saves some space for PinePhone in SPL and proper.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
