CSI1 channel (22) is missing and IOMMU (25) has priority flag set in
vendor bootloader. Fix that.
While at it, replace bandwidth flag with priority since original flag has
always value "true".
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
It's safer to start scanning for columns first and then rows. Columns
reside on LSB address pins, which means that second configuration will
already have all needed row pins active.
This is also preparation for introducing DDR4 support, which need scan
for banks and bank groups too.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
When comparing configuration procedure to vendor driver, I noticed that
one command was out of order and that some delays were missing.
Fix that.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
It seems that different dies need different PHY pin mapping. Select
alternatives at compile time.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
[adapted to switch from runtime to compile time config]
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Adjust H616 LPDDR4 DRAM settings to be in line with vendor driver.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT
update, both directories were based on the same v6.10 kernel tree.
And while there is one subtle difference in many Allwinner SoC's DT
files, the H616 ones turn out to be identical.
Remove the old copies of the H616 related .dts and .dtsi files, and
switch the whole H616 SoC over to use OF_UPSTREAM. This immediately
benefits from the recent upstream DT update, to kernel v6.11.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
During DT sync with kernel 6.6, AVS feature was removed by mistake.
So adding back AVS feature.
Fixes: df73e791ce09("arm: dts: j7200: dts sync with Linux 6.6-rc1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
This shows up in 'help' output and introduces bogus gap:
"
mfgprot - Manufacturing Protection
mii - MII utility commands
"
Drop the newline to fix this.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
The eMMC device on imx8mm-cl-iot-gate seems not support hs400.
When booting 6.1.0 kernel we got the following error.
mmc2: mmc_select_hs400es failed, error -110
mmc2: error -110 whilst initialising MMC card
Add no-mmc-hs400 to mmc2 node solves the problem.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
With the introduction of downstream Linux 6.6, the iMX8MP VPU block
control node in DTS was renamed "blk-ctl@38330000" and will not match
the ones found in `node_path_imx8mp` resulting in the node not being
disabled on the VPU-less variants.
Add an extra node_path entry for imx8mp VPU block control that match
with downstream Linux.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Add support for DH electronics i.MX8MP DHCOM SoM on DRC02 carrier board.
This system is populated with two ethernet ports, two CANs, RS485 and RS232,
USB, capacitive buttons and an OLED display.
Matching Linux kernel patch has been posted:
https://lore.kernel.org/imx/20240925160343.84388-2-marex@denx.de/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Add support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier board.
This system is populated with serial console, EQoS ethernet, eMMC, SD, SPI NOR,
LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX.
Matching Linux kernel patch has been posted:
https://lore.kernel.org/imx/20240928234949.357893-2-marex@denx.de/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
There are currently four symbols here, so drop the word 'two'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Separate BSS is current mandatory on armv8 but this is not useful for
early boot phases. Add support for the combined BSS.
Use an #ifdef to avoid using CONFIG_SPL_BSS_START_ADDR which is not
valid in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Oliver Gaskell <Oliver.Gaskell@analog.com> says:
ADSP-SC5xx is a series of ARM-based DSPs.
This comprises the armv7 based SC57x, SC58x and SC594 series, and the
armv8 based SC598.
This patch series includes configurations, init code, and minimal DTs
to enable Analog Devices' evaluation boards for these SoCs to boot
through SPL and into U-Boot Proper, as well as devicetree schemas for
the added DTs.
This patch series depends on ("arm: Add Analog Devices SC5xx Machine
Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
Adds support for Analog Devices' SC589-MINI board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC589-EZKIT board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC594-SOM-EZLITE board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC598-SOM-EZLITE board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Moves common options between all SC5xx series boards to the ARCH_SC5XX
option instead of duplicating them.
Also, it was possible to select multiple of the SoC support options.
Given a U-Boot binary can only support a single platform, this moves
the SoC selection to a `choice`, making them mutually exclusive.
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC598-SOM-EZLITE board.
This patch depends on Patches 01 and 07, for sc5xx.dtsi and
sc598-som.dtsi respectively.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC598-SOM-EZKIT board, and
the SC598 SoM.
This patch depends on patch 01, for sc5xx.dtsi.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC594-SOM-EZLITE board.
This patch depends on Patches 01 and 05, for sc5xx.dtsi and
sc594-som.dtsi respectively.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC594-SOM-EZKIT board, and
the SC594 SoM.
This patch depends on patch 01, for sc5xx.dtsi.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC584-EZKIT board, and
common files for the SC58x family.
This patch depends on Patch 01, for sc5xx.dtsi.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds minimal device tree for Analog Devices' SC573-EZKIT board and
common files for the SC57x/SC5xx family.
This also adds all sc5* devicetrees to ARM SC5XX in MAINTAINERS, and
adds the ADSP Linux mailing list as the list for ARM SC5XX.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Both regulators_enable_boot_on/off() are unused and superseded by
regulator uclass regulator_post_probe(). Remove both functions.
Signed-off-by: Marek Vasut <marex@denx.de>
Do not apply bitwise AND to register value and expected value, only
apply bitwise AND to register value and mask, and only then compare
the result with expected value that the function polls for.
Fixes: b49105320a5b ("stm32mp: psci: Implement PSCI system suspend and DRAM SSR")
Signed-off-by: Marek Vasut <marex@denx.de>
Update the TAMP_SMCR BKP..PROT fields to put first 10 registers
into protection zone 1 and next 5 into zone 2. This fixes use of
boot counter which is often in zone 3 and has to be updated from
Linux, which runs in NS.
Fixes: 73f7fc944cf6 ("ARM: stm32: Initialize TAMP_SMCR BKP..PROT fields on STM32MP15xx")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Maintain backward compatibility with pre-binman u-boot file naming,
the U-Boot fitImage used to be named u-boot.itb before, restore the
file name after binman conversion.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Jerome Forissier <jerome.forissier@linaro.org> says:
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both
emac.c implements cpu_eth_init() so it needs to pull the corresponding
header file.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The AT91-based platforms have a mem_init() function declared in
arch/arm/mach-at91/include/mach/at91_common.h and implemented in various
places. In preparation of the introduction of the lwIP networking library
which also has a global mem_init() function, rename the AT91 one to
at91_mem_init().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
beagleboneai64 boot was broken after OF_UPSTREAM support for
J721E SOC.
So add bootph in chipid node similar to other boards of
this SOC.
Fixes: 46bb1405b461 ("arm: dts: k3-j721e: Move to OF_UPSTREAM")
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
fixed-clock can't be described on the bus because it is missing reg
property. Also remove additional compatible string for flash. Mini qspi
configuration is used with multiple different flashes that's why describing
only one is not correct but also not required based on DT schema.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0e4721eda8d0f23a9d9f0c15cf887f0bba639cd4.1726219714.git.michal.simek@amd.com
