- stm32mp: Add script to install U-Boot from SD/eMMC to SPI NOR on DH STM32MP15xx
- stm32mp: Switch to using upstream DT on DH STM32 DHSOM
- stm32mp: Generate u-boot.itb using binman on DH STM32 DHSOM
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmcQ1JUACgkQ4rK92eCq
k3W+xQf+K0oBb8yTpVKSXW8quotu6r8XwrzvcWOpZVIIGpPpFoRa61feNcI5+Zrl
lvD3rBrD31PvvHC1wWPRsN3c+oJlnq7GQDPChix54rclgGJNd04zCnJ9QaST309F
yqr7w6Cx/AL6Fbcvxbv8FvQxyjgGrbchbJ4sHeD9AYABhV3Z0DuBaUttZorG6ZIO
23pxvK9X/dUJGmbmvKkMID3Ifxzum3HEaPf7n3HkFg1/bzICXSSjRUEAFBLWlQp5
7oiWLvHZDIefpC8zupewXYvRscsG9HOjSWhRUc8+zu4rK1bele/v4nig46nfrRSN
3RpimkKVvnJ2svV1cCLS2Mhq2V6SlQ==
=XS+7
-----END PGP SIGNATURE-----
Merge tag 'u-boot-stm32-20241017' of https://source.denx.de/u-boot/custodians/u-boot-stm
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/22732
- stm32mp: fix boot issue with OP-TEE
- stm32mp: Add script to install U-Boot from SD/eMMC to SPI NOR on DH STM32MP15xx
- stm32mp: Switch to using upstream DT on DH STM32 DHSOM
- stm32mp: Generate u-boot.itb using binman on DH STM32 DHSOM
Add USB-C controller (fusb302), which will be used by U-Boot to
initialize USB-PD. This is needed, because USB-PD communication
must happen within 5 seconds after the USB-C connector got plugged.
On my Rock 5B it often takes 5 seconds to jump to the Linux binary,
so it must happen before Linux is initialized.
This adds the DT node to the U-Boot specific file, since the Linux
kernel DT currently does not describe it to avoid a system reset.
The plan is to add it to the Linux DT with status = 'fail' and then
let U-Boot mark it as status = 'okay' if it properly dealt with
early USB-PD initialization. Until the Kernel DT has the node, let's
add it in U-Boot to get things going.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Soeren Moch <smoch@web.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In OP-TEE, the "optee_core@" node is reserved, appended in non secure
device tree (see mark_tzdram_as_reserved() function under CFG_DT) so
this name must be checked in optee_get_reserved_memory().
We keep the check on /reserved-memory/optee@ node to have backward
compatibility with STMT32Image booting, when the reserved node is
already present in U-Boot or SPL device tree with name "optee@".
This patch solves a boot issue on board with OP-TEE for U-Boot
compiled with stm32mp15_defconfig and without secure configuration
device tree (stm32mp157c-dk2.dts for example).
Fixes: 5fe9e0deabb1 ("stm32mp: allow calling optee_get_reserved_memory()
from U-Boot")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Move the stm32mp1 data cache reconfiguration after the lmb init call
board_r::initr_lmb to allow parsing of the reserved region with
no-map tag.
After this patch the DDR is not fully mapped up to arch_early_init_r()
call, only the relocation region is mapped, but it is enough for
the first board_r initialization phases; later, when arch_early_init_r()
is called, the LMB is already initialized and the function
lmb_is_reserved_flags() function is functional, this LMB function
is called in the weak function dram_bank_mmu_setup() when
dcache_enable() is executed.
Without this change, as LMB is not initialized when it is used in
dram_bank_mmu_setup, the OP-TEE region is mapped cache-able by U-Boot
and we have some firewall violation since "LMB memory map global and
persistent" series.
Fixes: ed17a33fed29 ("lmb: make LMB memory map persistent and global")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reserved memory for OP-TEE is located at end of DDR for STM32MP1 SoC only
(STM32MP13 and STM32MP15) and the OP-TEE reserved memory is located at the
beginning of DDR for STM32MP25 SoC, before CONFIG_TEXT_BASE and
with reserved memory for companion coprocessor. So the ram_top is limited
by OP-TEE reserved memory only for STM32MP1 SoC.
This patch solves an issue for ram_top value on STM32MP25 SoC because the
generic reserved memory management, based on LMB, is no more used before
relocation.
Fixes: 8242f14a3e6f ("stm32mp: compute ram_top based on the optee base address")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Describe the u-boot.its generation in stm32mp15xx-dhsom-u-boot.dtsi
binman {} DT node as a replacement for current CONFIG_SPL_FIT_SOURCE
use, dispose of both u-boot-dhcom.its and u-boot-dhcor.its.
Use fdt-SEQ/config-SEQ to generate a list of fdt-N fitImage images {} and
matching configuration {} node entries. The configuration node entry names
no longer encode _somrevN_boardrevN suffix, which was never really used, so
drop this functionality by default. Rework board_fit_config_name_match() to
match on the new configuration node entry names.
Users who do need the match on _somrevN_boardrevN can either replace the
fdt-SEQ/config-SEQ with fixed fdt-N/config-N nodes which each encode the
matching 'description = "NAME_somrevN_boardrevN"' to restore the old
behavior verbatim, or better use SPL DT overlays for U-Boot control DT
the same way e.g. i.MX8MP DHCOM does to support multiple SoM and board
variants.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Enable OF_UPSTREAM to use upstream DT and add st/ prefix to the
DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/
including *-u-boot.dtsi from arch/$(ARCH)/dts/ directory.
The previous setup used generic SoC prefix like stm32mp15xx-dhco* for
generic DTs which could be used on any STM32MP15xx DHSOM variant. The
new setup uses specific SoC prefix stm32mp157c-dhco* to match Linux DT
names. Since the hardware present on STM32MP153 and STM32MP157 is not
enabled in the board configuration and not supported by U-Boot except
for the DSI host, using the existing Linux DTs poses no issue even on
plain STM32MP151A based SoMs.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The cpu0-opp-table {} node does not exist in upstream Linux stm32mp151.dtsi
file, in order to enable conversion to OF_UPSTREAM, duplicate the node from
current U-Boot stm32mp151.dtsi into stm32mp15-u-boot.dtsi. This makes STM32
DTs buildable even with OF_UPSTREAM enabled. No functional change, since the
current U-Boot stm32mp151.dtsi already contains the cpu0-opp-table {} node,
stm32mp15-u-boot.dtsi is applied at the end, and does not bring in any new
content.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The EFI_CONVENTIONAL_MEMORY type is now being managed through the LMB
module. Add a separate function, lmb_arch_add_memory() to add the RAM
memory to the LMB memory map. The efi_add_known_memory() function is
now used for adding any other memory type to the EFI memory map.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The EFI memory allocations are now being done through the LMB module,
and hence the memory map is maintained by the LMB module. Use the
lmb_arch_add_memory() API function to add the usable RAM memory to the
LMB's memory map.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The efi_add_known_memory() function for the stm32mp platforms is adding
the EFI_CONVENTIONAL_MEMORY type. This memory is now being handled
through the LMB module -- the lmb_add_memory() adds this memory to the
memory map. Remove the definition of the now superfluous
efi_add_known_memory() function.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The efi_add_known_memory() function for the TI K3 platforms is adding
the EFI_CONVENTIONAL_MEMORY type. This memory is now being handled
through the LMB module -- the lmb_add_memory() adds this memory to the
memory map. Remove the definition of the now superfluous
efi_add_known_memory() function.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The dtbs: target is almost identical in all architecture Makefiles.
All architecture Makefiles include scripts/Makefile.dts . Deduplicate
the dtbs: target into scripts/Makefile.dts . No functional change.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom, OF_UPSTREAM
- Add new Boards:
- Libre Computer aml-s905d3-cc
- Libre Computer aml-a311d-cc
- Add capsule update to libretech-ac and the new boards since they have an onboard SPI nor flash
- Fix HDMI support after sync to v6.11 and regulator enable from Marek
- Fix khadas-vim3 android config for android-mainline kernel
- Disable meson64 boot targets when configs are not eavailable
-----BEGIN PGP SIGNATURE-----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=oq4w
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20241014' of https://source.denx.de/u-boot/custodians/u-boot-amlogic
- Add Libre Computer boards into proper libre-computer board directory
- Add new Boards:
- Libre Computer aml-s905d3-cc
- Libre Computer aml-a311d-cc
- Add capsule update to libretech-ac and the new boards since they have an onboard SPI nor flash
- Fix HDMI support after sync to v6.11 and regulator enable from Marek
- Fix khadas-vim3 android config for android-mainline kernel
- Disable meson64 boot targets when configs are not eavailable
Add support for the Libre Computer aml-s905d3-cc "Solitude" board:
https://libre.computer/products/aml-s905d3-cc/
The Solitude board has a Credit Card form factor, similar to the
the previous "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=4302C3CB-2502-5EFE-87E0-894A8A322893
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 4302C3CB-2502-5EFE-87E0-894A8A322893 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-2-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add support for the Libre Computer aml-a311d-cc "Alta" board:
https://libre.computer/products/aml-a311d-cc/
The Alta board has a Credit Card form factor, similar to the
the prvevious "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=17E07D9D-4D91-53F4-8780-1D91F279C1A5
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 17E07D9D-4D91-53F4-8780-1D91F279C1A5 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-1-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This switches all boards with the Allwinner H616/H618/H313/H700 SoCs over to
use OF_UPSTREAM. We are doing it for this SoC family only since the DTs
between the U-Boot and the kernel repo are exactly identical, whereas other
families have one compatibility fix in U-Boot to allow booting older kernels.
Other will follow if this plays out well.
The biggest chunk otherwise is adding support for an Anbernic game console,
using the H700 SoC. For that we need to enhance the DRAM support code, and
pick two DT commits from the mainline kernel/DT rebasing repo, followed
by the defconfig patch.
On top of that two small fixes for the old Allwinner A80.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
Implement invalidate_icache_all() by clearing all V bits in
IC and OC. This is done by setting CCR cache control register
ICI and OCI bits.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: u-boot@lists.denx.de
Assorted Tegra enhancements. Merged with the recent XPL_BUILD changes,
resolve some whitespace issues and fix the name of the new apalis-tk1
env file by Tom.
Signed-off-by: Tom Rini <trini@konsulko.com>
Obtain USB phy configuration from phy node if such exists
and is enabled. If no, set default values.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add previously undocumented SKU - AP20H found in LG Optimus 2X (P990).
Correct existing T20_7 name as it's proper name is AP20.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Change %02X to %02x since it always displayed 00 otherwise.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Buildman has difficulties with constructing multi-dtb images, so
let's add a temporary custom recipe for it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tegra 3 has UART-E exposable via SD card slot which may be
handy for debugging. This change only adds funcmux part, to
use UART-E on the device you additionally would need:
- set stdout-path to serial@70006400 (uarte)
- configure sdmmc1_dat3_py4 and sdmmc1_dat2_py5 pinmux for
uarte
- disable or remove sdhci@7800000 node
- enable CONFIG_TEGRA_ENABLE_UARTE in defconfig
- set CFG_SYS_NS16550_COM to NV_PA_APB_UARTE_BASE in device
header
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Device tree for this board can be deleted. Device tree location
now points to the freescale/ directory.
Use absolute path to PMIC node entry and its regulators as
device tree in kernel does not provide corresponding labels
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The SCU API alreay has been converted to return Linux error code,
using SCU error code is not correct here, although SC_ERR_NONE is value
as 0.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add ELE APIs to support read and write shadow fuses
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This board clearly develops first in Linux which had more
hardware listed, so let's start to use OF_UPSTREAM.
This makes the NAND driver work.
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The BCM6846 has the BRCMBCA NAND controller so enable
it.
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
SPL_BUILD is not a Kconfig symbol so perhaps the intent here is to
use SPL instead. But that changes the output size.
So drop the dependency on !SPL_BUILD since it does nothing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Christian Marangi <ansuelsmth@gmail.com> says:
This series is a reworked version of the previous seried:
misc: introduce STATUS LED activity function
This series port and expand the legacy concept of LED boot from
the legacy Status LED API to new LED API.
One thing that many device need is a way to communicate to the
user that the device is actually doing something.
This is especially useful for recovery steps where an
user (for example) insert an USB drive, keep a button pressed
and the device autorecover.
There is currently no way to signal the user externally that
the bootloader is processing/recoverying aside from setting
a LED on.
A solid LED on is not enough and won't actually signal any
kind of progress.
Solution is the good old blinking LED but uboot doesn't
suggest (and support) interrupts and almost all the LED
are usually GPIO LED that doesn't support HW blink.
Additional Kconfg are also introduced to set the LED boot and
activity. Those are referenced by label.
A documentation for old and these new LED API is created.
Expand ofnode options test with new generic helper for bool, int and
string.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add tests for LED boot and activity feature and add required property in
sandbox test DTS.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This is not actually a command so the name is confusing. Use
BOOTEFI_HELLO_COMPILE instead. Put it in the efi_loader directory
with the other such config options.
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
