Following the move of the H616 family to OF_UPSTREAM in the last cycle,
now some older SoCs with identical DTs follow the lead: the F1C100s, A10,
A10s, A13. The remaining SoCs suffer from that IRQ cells incompatiblity,
breaking support for Linux < v5.13, so I am holding their move back still.
Otherwise we get proper support for the PinePhone v1.2, and PSTORE support
for all revisions of that device.
This is rounded up by a PMIC related fix for some A80 boards, and two
cleanup patches that are preparations for two new SoCs families, being
worked on as we speak. But they have to wait for the next cycle.
Gitlab CI passed, and I booted that briefly on some boards.
This isn't strictly needed, but with UPL we use the reserved-memory
nodes to indicate where the SMBIOS table is. Tianocore requires 4KB
alignment on these regions, so it is easier to adjust the alignment
to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the tables to use linux/sizes rather than open-coped values.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
If video is enabled we expect it to work. Avoid silent failure by adding
a panic if things go wrong.
Expand the SPL malloc-area for qemu-x86_64 to avoid a panic.
Signed-off-by: Simon Glass <sjg@chromium.org>
QEMU can have its own internal ACPI and SMBIOS tables. At present U-Boot
copies out the SMBIOS tables but points directly to the ACPI ones.
The ACPI tables are not aligned on a 4KB boundary, which means that UPL
cannot use them directly, since it uses a reserved-memory node for the
tables and that it assumed (by EDK2) to be 4KB-aligned.
On x86, QEMU provides the tables in a mapped memory region and U-Boot
makes use of these directly, thus making it difficult to use any common
code.
Adjust the logic to fit within the existing table-generation code. Use a
bloblist always and ensure that the ACPI tables is placed in an aligned
region. Set a size of 8K for QEMU. This does not actually put all the
tables in one place, for QEMU, since it currently adds a pointer to the
tables in QFW.
On ARM, enable bloblist so that SMBIOS tables can be added to the
bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner A10s/A13 SoCs (sun5i) between the U-Boot and the
Linux kernel repository.
Remove the old copies of the A10s/A13 related .dts and .dtsi files, and
switch most of sun5i boards over to use OF_UPSTREAM.
There are two boards for which we don't have DTs in the kernel tree.
Keep those two .dts files in the legacy U-Boot DT directory, and let
their defconfig opt out of OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner A10 SoCs (sun4i) between the U-Boot and the
Linux kernel repository.
Remove the old copies of the A10 related .dts and .dtsi files, and switch
most of sun4i boards over to use OF_UPSTREAM.
There are two boards for which we don't have DTs in the kernel tree.
Keep those two .dts files in the legacy U-Boot DT directory, and let
their defconfig opt out of OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner F1C100/F1C200 SoCs (sunvi) between the U-Boot
and the Linux kernel repository.
Remove the old copies of the F1Cx00 related .dts and .dtsi files, and
switch the whole suniv SoC over to use OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The H616 DRAM controller requires some board specific parameters, which
we declare in Kconfig, let each board specify in their defconfig, and
then use in the DRAM init code.
Other DRAM controllers now require a very similar, if not identical
parameter set, with so far the same parameter names used.
To help keep the Kconfig file at bay, rename the existing parameter
names to drop the H616_ part in there, to make them more naturally
reusable for other SoCs.
No functional change, just a rename.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
With each new SoC added to the clock_sun50i_h6.h header file, we add a
list of default values for the bus clock registers. This list gets a bit
hard to read, as the spacing between the lines looks confusing.
Tighten the lines by removing empty lines, to make it more obvious which
values belong together. Also remove those comments that were more or
less duplicating the next code line, and didn't add any information.
This makes it easier to find existing values and to add support for new
SoCs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Use this function instead of fit_image_get_emb_data() data, since it
works will FITs that use external data.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function can only be used with FITs that use embedded data. Rename
it so this is clear.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
commit fc37a73e6679 ("fdt: Swap the signature for
board_fdt_blob_setup()") introduced a subtle change to the Snapdragon
implementation, removing the assignment to gd->fdt_blob partway through
the function.
This breaks qcom_parse_memory() which was also called during
board_fdt_blob_setup().
The underlying issue here is that qcom_parse_memory is using the of_ api
to traverse a devicetree, which relies on the fdt_blob in global data.
Rather than relying on this subtle behaviour, explicitly pass the FDT
that should be consulted for a /memory node.
Using the OF API is typically preferable because it's easier to read,
but using the lower level fdt_ methods instead here doesn't add too much
complexity, I think.
Finally, a minor tweak was made to board_fdt_blob_setup to use the
passed fdt blob pointer instead of gd->fdt_blob, which removes the last
of the references to global data in this area.
Fixes: fc37a73e6679 (fdt: Swap the signature for board_fdt_blob_setup())
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Sam Day <me@samcday.com>
Link: https://lore.kernel.org/r/20250122-qcom-parse-memory-updates-v2-1-98dfcac821d7@samcday.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Weijie Gao <weijie.gao@mediatek.com> says:
This patch series migrates MediaTek MT7629 to OF_UPSTREAM
Changes in v2:
* Remove mt7629-rfb.dtb from arch/arm/dts/Makefile
* Add wdt-reboot node to make reset command work
Link: https://lore.kernel.org/r/cover.1736851116.git.weijie.gao@mediatek.com
david regan <dregan@broadcom.com> says:
Updates for Broadcom bcmbca devices,
make use of OF_UPSTREAM which uses Linux dts,
update bcmbca dts to current nand node naming convention,
enable basic nand functionality for bcmbca devices.
Link: https://lore.kernel.org/r/20250114045425.148801-1-dregan@broadcom.com
Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Move differences in DT files between upstream Linux DT and U-Boot DT to
mt7629-rfb-u-boot.dtsi.
Remove old copies of mt7629-related clock bindings, .dts, and .dtsi files.
Update defconfig to switch the whole mt7629 SoC to use OF_UPSTREAM.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Update bcmbca dts to current nand node naming convention.
Changes in v2:
- Removed addition of nand-on-flash-bbt parameter
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Make use of OF_UPSTREAM which uses Linux dts.
Changes in v2:
- Removed enabling of nand functionality
Signed-off-by: david degan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Now that block drivers are all selecting the BLK symbol, there's no need
for other options to be select'ing BLK so that other required
functionality can be enabled. Remove these places.
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
At this point in time, DM is always enabled. So if MMC is enabled, it
should select DM_MMC. No drivers need to depend on DM_MMC being enabled
now, so remove that from dependency lists. This now means that a number
of platforms which select'd DM_MMC need to select MMC instead. This also
fixes a migration problem with espresso7420 in that MMC is built again
with the platform.
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Delete tifs DT node as part of fixup.
TISCI API reported msmc_size, does not include 64KB reserved size for
tifs aka MSMC comms memory, see documentation[0].
As part of fixup, original code uses TISCI API reported msmc_size as
size for SRAM DT node.
tifs node is similar to l3-cache, which should hold address above
msmc_size, and should be deleted before passing control to OS.
[0] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html?highlight=msmc#tisci-msg-query-msmc
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
The default value for the mux to select the parent clock,
AUDIO_REFCLK1_CTRL_CLK_SEL is '11111' (31) but the mux input for 31
is marked as 'Reserved' so the ti-sci-clk call for get-parent fails.
Mark it to a valid value, '11100' (28) for MAIN_PLL4_HSDIV2_CLKOUT
to get rid of the linux failures during boot-time like:
"[ 1.573193] ti-sci-clk 44083000.system-controller:clock-controller:
get-parent failed for dev=157, clk=34, ret=-19"
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Guard binman nodes with CONFIG_OPTEE to fix the following error
when building without optee support:
BINMAN .binman_stamp
Image 'image' has faked external blobs and is non-functional: tee.bin
Image 'image' is missing optional external blobs but is still functional: tee-os
/binman/section/fit/images/tee/tee-os (tee.bin):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Some images are invalid
make: *** [Makefile:1135: .binman_stamp] Error 103
While at it, only pass tee to the loadables lines when CONFIG_OPTEE is
defined.
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Yannic Moog <y.moog@phytec.de>
Documentation:
* Correct the defconfig name in the coolpi documentation
UEFI:
* Carve out the biggest part of the RISC-V and ARM linker scripts for EFI
binary into a common include.
* Correct the values of SizeOfCode and SizeOfInitializedData in generated
EFI binaries for RISC-V and ARM.
* Avoid gaps between sections in EFI binaries causing a failure in secure
boot.
* Makefile: let clean remove capsule_in.capsule*.efi-capsule
* Refactor some of the code used for launching EFI binaries.
-----BEGIN PGP SIGNATURE-----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=7RxC
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-04-rc1
Documentation:
* Correct the defconfig name in the coolpi documentation
UEFI:
* Carve out the biggest part of the RISC-V and ARM linker scripts for EFI
binary into a common include.
* Correct the values of SizeOfCode and SizeOfInitializedData in generated
EFI binaries for RISC-V and ARM.
* Avoid gaps between sections in EFI binaries causing a failure in secure
boot.
* Makefile: let clean remove capsule_in.capsule*.efi-capsule
* Refactor some of the code used for launching EFI binaries.
In case the build system builds a directory with empty Makefile,
one which does not contain any obj-y entries, the build fails to
link due to missing built-in.o .
This happens because of this part of scripts/Makefile.build
81 ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
82 builtin-target := $(obj)/built-in.o
83 endif
which does not assign builtin-target in case obj-y is empty. The
built-in target is then not built at all, and built-in.o is not
generated by this part of scripts/Makefile.build
325 ifdef builtin-target
326 quiet_cmd_link_o_target = AR $@
327 # If the list of objects to link is empty, just create an empty built-in.o
...
335 targets += $(builtin-target)
336 endif # builtin-target
This is the correct behavior.
The final link however expects the built-in.o to exist in every directory
included in the build, even in those where the aforementioned code skipped
generation of built-in.o . Make sure the built-in.o does exist for every
directory used in final link simply by doing touch on every built-in.o used
for the link, which will create empty built-in.o in case any built-in.o is
missing.
A possible alternative fix is the always define the builtin-target
and always generate built-in.o .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Most R-Car Gen3 and Gen4 systems require extalr_clk very early
in the boot process. Currently the extalr_clk { bootph-all } DT
property to indicate this clock should be available early is set
in each SoC U-Boot DT extras file. Deduplicate this assignment to
new common r8a779x-rcar64-u-boot.dtsi file.
Note that R-Car Gen3 R8A77990 E3 and R8A77995 D3 and RZ R8A774C0
do not require extalr_clk early, therefore these SoCs still include
plain r8a779x-u-boot.dtsi in their U-Boot DT extras .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Use the same include as arm64 for the linker script.
Adjust the 32-bit ARM PE-COFF header accordingly and harmonize it with the
64-bit ARM header.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The fields SizeOfCode, SizeOfInitializedData, and SizeOfUninitializedData
are define in the PE-COFF specification [1].
* SizeOfCode must match the size of all .text sections.
* SizeOfInitializedData must match the size of all .data sections.
* SizeOfUninitializedData must match the size of all .bss sections.
We only have one .text and one .data section. SizeOfCode and
SizeOfInitializedData have to be calculated as the difference between
the end and the start of the respective section.
As we don't have any .bss sections in the generated EFI binaries.
SizeOfUninitializedData must remain 0.
[1] https://learn.microsoft.com/en-us/windows/win32/debug/pe-format
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Except for the architecture specific lines ARM and RISC-V can use the same
linker script. Move the common lines to an include.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
When creating EFI binaries, the alignment of the text section isn't
correctly factored in. As a result trying to load signed EFI binaries
throws an error with:
efi_image_region_add() efi_image_region_add: new region already part of another
Image not authenticated
Running the binary through sbverify has a similar warning
sbverify ./lib/efi_loader/helloworld.efi
warning: gap in section table:
.text : 0x00001000 - 0x00001c00,
.data : 0x00002000 - 0x00002200,
gaps in the section table may result in different checksums
warning: data remaining[7680 vs 12720]: gaps between PE/COFF sections?
.....
If we include the alignment in the text section, the signed binary boots
fine, and the relevant sbverify warning goes away
sbverify ./lib/efi_loader/helloworld.efi
warning: data remaining[8704 vs 12720]: gaps between PE/COFF sections?
.....
We should look into the remaining warning at some point as well
regarding the gaps between PE/COFF sections.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The function disable_thermal_cpu_nodes() corrupts the cooling-device
property.
For example, booting an i.MX93 devices with only one A55 core (IMX93x1)
with the cooling-device property set to:
$ dtc -I dtb foo.dtb | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff 0x09 0xffffffff 0xffffffff>;
Linux shows the following error at boot:
[ 1.715189] OF: /thermal-zones/cpu-thermal/cooling-maps/map0: could not find phandle 1083699869
[ 1.723977] thermal_sys: Add a cooling_device property with at least one device
[ 1.731285] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-devfreq-0 failed:-2
because the cooling-device property in the device tree passed to the
kernel is
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x4097f29d 0x00 0xb05aef9d>;
The issue is because the wrong variable type is passed to the function
fdt_setprop() called in the function disable_thermal_cpu_nodes(). With
the variable type fixed, the error at boot is gone and the property is
properly set:
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff>;
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Add tee node in SoC u-boot device trees. Use a kconfig entry to specify
load and entry addresses for the op-tee image in the respective
defconfig.
Default IMX8M_OPTEE_LOAD_ADDR is supplied. To keep it simple, the same
addresses are used for each SoC as are defined in upstream tf-a
(BL32_BASE) [1].
[1] https://github.com/ARM-software/arm-trusted-firmware/tree/master/plat/imx/imx8m
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add Canaan K230 SoC with sysreset support, running without cache
enabled.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
