The header of LiMon imported files reference a License file which
does not exist in U-Boot. Some files were forgotten when adding the
SPDX-License-Identifier.
The LiMon files were originally licensed under GPLv2 as can be seen in
commit [2ea91039].
Based on this commit, add the correct SPDX license identifier.
While at it drop the reference to the non-existing License file from all
LiMon files and update the SPDX-License-Identifier to SPDX version 3.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Add Kconfig symbol LWIP_ICMP_SHOW_UNREACH which, when enabled, prints a
message to the console upon reception of ICMP unreachable messages. For
example:
$ make qemu_arm64_lwip_defconfig
$ qemu-system-aarch64 -M virt -cpu max -nographic -bios u-boot.bin
[...]
=> dhcp
DHCP client bound to address 10.0.2.15 (0 ms)
=> tftp 192.168.0.100:69:Image
Using virtio-net#32 device
TFTP from server 192.168.0.100; our IP address is 10.0.2.15
Filename 'Image'.
Load address: 0x40200000
Loading: ICMP destination unreachable (host unreachable) from 192.168.0.16
Timeout!
=> tftp 192.168.0.16:69:Image
Using virtio-net#32 device
TFTP from server 192.168.0.16; our IP address is 10.0.2.15
Filename 'Image'.
Load address: 0x40200000
Loading: ICMP destination unreachable (port unreachable) from 192.168.0.16
Timeout!
=>
Submitted upstream as https://github.com/lwip-tcpip/lwip/pull/73.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The call to eth_init within net_init causes the network interface to
start, stop, start again which can cause issues with certain network
device drivers. Remove it to make it behave like the legacy network
path.
Fixes: 5666865decb8 ("net: lwip: fix initialization sequence before a command")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
For NET_LWIP eth_is_on_demand_init() is always 1 so remove the check and
simplify the code.
Suggested-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
content_length is an unsigned long and so testing that it is >= 0 will
always be true. Instead test that it is != -1 as that is the condition
set on error.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
In tcp_parse_options the uchar p[0] is attempted to test for a match
with the 32bit macro TCP_0_NOP which can never be true. Instead test
against the 8bit macro TCP_1_NOP.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Extract the code that sets the RTC clock from sntp_handler() in
net/sntp.c and make it a new function net_sntp_set_rtc() in
net/net-common.c. This will allow re-use with NET_LWIP.
According to [1] it is safe to assume that all devices have been
converted to DM_RTC so drop the useless code.
[1] https://lists.denx.de/pipermail/u-boot/2025-June/591376.html
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Add a helper fonction to convert an IP address (supplied as a text
string) or a host name to an ip_addr_t.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Split net/lwip/wget.c in two: one part which implements CONFIG_WGET
stays in net/ while the part that implements CONFIG_CMD_WGET is moved
into cmd/.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Prepare to split the ping command from cmd/net-lwip.c by moving the
implementation from net/lwip/dns.c to cmd/lwip.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Prepare to split the dns command from cmd/net-lwip.c by moving the
implementation from net/lwip/dns.c to cmd/lwip.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Initialize dns servers if a hostname (vs ipaddr) is used in a URL.
Otherwise the wget will fail without displaying an error due to
dns_gethostbyname failing silently when no DNS servers are set unless
you have previously performed a 'dns <arg>' command.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
move the dns init including setting the dns servers from env vars to a
common function as other commands that support hostname lookups will
need this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[jf: add CMD_DNS conditional to support NET_LWIP && !CMD_DNS]
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Add support for setting the blocksize at runtime via the tftpblocksize env
variable as such is done with the legacy stack (CONFIG_NET).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Call schedule() in net_lwip_rx() to service U-Boot tasks and
actions during packet rx.
As a cleanup also move sys_check_timeouts() here and remove it from the
functions that call net_lwip_rx().
This resolves the issue of an active watchdog resetting the board on
long network activities.
Suggested-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
DHCP and DHCPv6 use the same value defined in
https://www.iana.org/assignments/dhcpv6-parameters#processor-architecture
to encode the processor architecture type. We should only use a single
Kconfig symbol for both protocols.
Furthermore we should make the value customizable. This allows for instance
to choose between "x86 BIOS" or "x64 UEFI".
As "x86 BIOS" is encoded as 0, we should not use this value to switch
off transmission of the DHCP option. Use 0xFF instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini <trini@konsulko.com> says:
Hey all,
This is a v3 of Simon's series[1] and depends on the series[2] I posted
the other day that removes <env.h> from <command.h>. With this series
done, I believe we've tackled all of the current cases of headers which
include <env.h> without directly needing it. Much of this series is in
fact Simon's v2 with the main differneces being:
- Removing <env.h> from <net.h> at the end
- Removing env_to_ip() given how little it's used rather than shuffling
around where it's declared and un-inline'ing it. For a rarely used
helper, this ends up being cleaner I think. Especially looking at some
of the users (which called env_get repeatedly). If there's strong
opinion here about using the other method[3] we can do that instead.
- Setting aside for now how to handle CMD_ELF=y and NO_NET=y because
today it's actually fine as we unconditionally build lib/net_utils.c
where string_to_ip() is defined. I'm unsure if a further series is
warranted here or not. We rely on link-time optimization to keep code
readable too.
[1]: https://lore.kernel.org/all/20250501010456.3930701-1-sjg@chromium.org
[2]: https://lore.kernel.org/all/20250514225002.15361-1-trini@konsulko.com
[3]: https://lore.kernel.org/all/20250501010456.3930701-23-sjg@chromium.org
Link: https://lore.kernel.org/r/20250515234154.1859366-1-trini@konsulko.com
Now that env_get_ip() has been removed, the include file <net.h> does
not need anything from <env.h>. Furthermore, include/env.h itself
includes other headers which can lead to longer indirect inclusion
paths. To prepare to remove <env.h> from <net.h> fix all of the
remaining places which had relied on this indirect inclusion to instead
include <env.h> directly.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> # net/lwip
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, we have the function env_get_ip which takes an IP address
in string form and returns a struct in_addr representation of that
address. It is however little used and means that a number of places
indirectly (and unclearly) get <env.h> via <net.h>. To clean this up
start by replacing env_get_ip() calls with string_to_ip() calls. This is
generally a no-op as env_get_ip(str) is an inline of
string_to_ip(env_get(str)) but in a few cases we can or already have
stored the result of env_get(str) and can save the additional call.
Signed-off-by: Tom Rini <trini@konsulko.com>
Contrary to doc/develop/driver-model/ethernet.rst contract, eth_ops
.free_pkt can be called after .stop, there are several error paths in TFTP,
for instance:
eth_halt() <= tftp_handler() <= net_process_received_packet() <= eth_rx()
...
am65_cpsw_free_pkt() <= eth_rx()
Which results in (deliberately "tftpboot"ing non-existing file):
TFTP error: 'File not found' (1)
Not retrying...
am65_cpsw_nuss_port ethernet@8000000port@1: RX dma free_pkt failed -22
Avoid the DMA error message (and follow the documentation) by deferring
eth_halt() until net_loop() calls net_start_again() and only do
eth_halt_state_only() instead.
Fixes: aafda38fb266 ("Add error codes/handling for TFTP-server")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Sean Edmond <seanedmond@microsoft.com> says:
In our datacenter application, a single DHCP server is servicing 36000+ clients.
Improvements are required to the DHCPv4 retransmission behavior to align with
RFC and ensure less pressure is exerted on the server:
- retransmission backoff interval maximum is configurable
(environment variable bootpretransmitperiodmax)
- initial retransmission backoff interval is configurable
(environment variable bootpretransmitperiodinit)
- transaction ID is kept the same for each BOOTP/DHCPv4 request
(not recreated on each retry)
For our application we'll use:
- bootpretransmitperiodmax=16000
- bootpretransmitperiodinit=2000
A new configuration BOOTP_RANDOM_XID has been added to enable a randomized
BOOTP/DHCPv4 transaction ID.
Enhance DHCPv4 sending/parsing option 209 (PXE config file). A previous
patch was accepted. A new patch fixes a possible double free() and
addresses latest review comments.
Link: https://lore.kernel.org/r/20240509023918.2504185-1-seanedmond@microsoft.com
The new config option BOOTP_RANDOM_XID will randomize the transaction ID
for each new BOOT/DHCPv4 exchange.
Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This patch introduces 3 improvements to align with RFC 951:
- retransmission backoff interval maximum is configurable
- initial retranmission backoff interval is configurable
- transaction ID is kept the same for each BOOTP/DHCPv4 request
In applications where thousands of nodes are serviced by a single DHCP
server, maximizing the retransmission backoff interval at 2 seconds (the
current u-boot default) exerts high pressure on the DHCP server and
network layer.
RFC 951 “7.2. Client Retransmission Strategy” states that the
retransmission backoff interval should be limited to 60 seconds. This
patch allows the interval to be configurable using the environment
variable "bootpretransmitperiodmax"
The initial retranmission backoff period defaults to 250ms, which is
also too small for these scenarios with many clients. This patch makes
the initial retransmission interval to be configurable using the
environment variable "bootpretransmitperiodinit".
Also, on a retransmission it is not expected for the transaction ID to
change (only the 'secs' field should be updated). Let's save the
transaction ID and use the same transaction ID for each BOOTP/DHCPv4
exchange.
Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
- Enable option 209 by default
- Set pxelinux_configfile to NULL to avoid potential double free
- change hardcoded 209 to a define
Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
When there is no reply from the TFTP server, do_tftpb() should
eventually time out. Add a 10 second timer for that purpose.
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Legacy NET tftp invokes a store_block() function which performs buffer
validation (LMB, address wrapping). Do the same with NET_LWIP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Suggested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Legacy NET wget invokes a store_block() function which performs buffer
validation (LMB, address wrapping). Do the same with NET_LWIP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Suggested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Functions called from EFI applications should not do console output.
Refactor the wget code to implement this requirement. The wget_http_info
struct is used to hold the boolean that signifies whether the output is
allowed or not.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
wget_do_request() currently does so little before calling the static
function wget_loop() that we may as well rename wget_loop() to
wget_do_request() and put everything in one function.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Now that the DSA tests in test/dm/dsa.c are compatible with NET_LWIP,
remove the dependency of DM_DSA on NET.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When the sandbox timer is available, use it. This allows skipping
time in the tests (sandbox_eth_skip_timeout()).
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Use net_start_again() in do_ping() to determine if a failed ping should
be restarted on a different interface.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Implement net_start_again() when NET_LWIP=y in a very similar way to
NET. This will be used in a future commit to determine if a failed
ping needs to be tried again on a different interface.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The things that are done prior to executing a network command with
NET_LWIP are not consistent with what is done with NET. It impacts the
selection of the current device, and more precisely if the active device
is invalid NET would return an error while NET_LWIP would try to pick a
new device. This incorrect behavior was detected thanks to the eth_rotate
sandbox test (dm_test_eth_rotate()).
Fix it by re-using a sequence similar to what NET has in net_loop().
This piece of code is inserted in a function called net_lwip_eth_start()
renamed from net_lwip_eth_set_current().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
!A || (A && B) is equivalent to !A || B
Drop the middle expression from the statement
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
In IPv6, the broadcast MAC address is not used. Instead, it should use
the multicast address (see RFC RFC2464).
Add IPV6_ALL_NODE_ETH_ADDR macro for clarity.
Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
Andre Przywara <andre.przywara@arm.com> says:
C's implicit fallthrough behaviour in switch/case statements can lead to
subtle bugs. Quite some while ago many compilers introduced warnings in
those cases, requiring intentional fallthrough's to be annotated.
So far we were not enabling that compiler option, so many ambiguities
and some bugs in the code went unnoticed.
This series adds the required annotations in code paths that the first
stage of the U-Boot CI covers. There is a large number of cases left
in the libbz2 code. The usage of switch/case is borderline insane there,
labels are hidden in macros, and there are no breaks, but just goto's.
Upstream still uses very similar code, without any annotations. I still
am not 100% sure those are meant to fall through or not, and plan to do
further investigations, but didn't want to hold the rest of the patches
back. You can see for yourself by applying patch 18/18 and building for
sandbox64, for instance.
Because of this we cannot quite enable the warning in the Makefile yet,
but those fixes are worth regardless, and be it to increase readability.
Please note that those patches do not fix anything, really, they just add
those fallthrough annotations, so the series is not really critical.
Link: https://lore.kernel.org/r/20250327153313.2105227-1-andre.przywara@arm.com
In some cases in the generic code, we were already using switch/case
fallthrough annotations comments, though in a way which might not be
understood by most compilers.
Replace two non-standard /* no break */ comments with our fallthrough;
statement-like macro, to make this visible to the compiler.
Also use this macro in place of an /* Fall through */ comment, to be
more consistent.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Note that this undoes the changes of commit cf6d4535cc4c ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
When an ethernet driver fails to send a frame we print an error in lwIP.
But depending on how often that error is it might significantly delay
transmissions.
For example downloading a big file with the rpi4 spams the console with
'send error: -101', but removing the print makes the file download with
an average speed of ~8.5MiB/s since the packets are retransmitted.
So let's move it to a 'debug' in lwIP and expect ethernet drivers to handle
the failure if it's severe.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
do_ping() expects ping_loop() to return a negative value on error, so
that it can propagate it to the caller as CMD_RET_FAILURE. This is not
the case when no ethernet device is found, so fix that.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass <sjg@chromium.org> says:
This series includes some patches related to allowing read_all() to be
used with the extlinux / PXE bootmeths.
These patches were split out from the stb4 series, since it will need to
have additional patches for LWIP, to avoid breaking PXE booting when
LWIP is used.
Link: https://lore.kernel.org/r/20250306002533.2380866-1-sjg@chromium.org
Add a new netboot_run() function which can be used for simple network
operations, such as loading a file. Put the implementation in an
internal function, used by the existing code.
Place this function into the net/ code, so that it does not need the
command line to be available.
Document which network operations are supported, i.e. a limited subset,
for now.
For the one board which uses lwip, it is not quite clear how to avoid
using the cmdline interface. This will need some discussion.
Signed-off-by: Simon Glass <sjg@chromium.org>
