It is sometimes useful to be able to boot via EFI using a Linux initrd.
Add support for this.
Fix a 'specifiy' typo while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
The Auto Negotiation procedure between two Ethernet PHYs consists of
determining the best commonly supported parameters among Speed,
Duplex Mode and Flow Control.
The time taken for this procedure is not only dependent on the local
PHY used, but also on the link-partner PHY.
While a timeout can be specified in the form of a "CONFIG" on the basis
of the local PHY present on the device, since the timeout also depends
on the link-partner PHY, it might be necessary to modify the timeout.
To avoid rebuilding the bootloader for a given device, just because it
may be connected to various link-partner PHYs, each with a different
timeout, introduce an environment variable named "phy_aneg_timeout" and
override "CONFIG_PHY_ANEG_TIMEOUT" with "phy_aneg_timeout".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
[jf: add missing #include <env.h>]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Update the FIT signature testing instructions to use the pytest suite instead of
the old vboot_test.sh script.
Signed-off-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
This is only a reformatting, with a few grammar fixes (capitalization,
and a missing "is" and "be" added each).
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: Tom Rini <trini@konsulko.com>
Correct the references for
* the x86 boot protocol description
* the FIT file format
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add a proper documentation file for the sntp command in RST format and
drop doc/README.SNTP. The documentation now includes the NET_LWIP
specificities.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
-----BEGIN PGP SIGNATURE-----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=e4ez
-----END PGP SIGNATURE-----
Merge tag 'v2025.07-rc5' into next
Prepare v2025.07-rc5
With this merge, tighten up the LTO_FLAGS removal we added to not
trigger on ARMv7 (which is Thumb-2 and should be fine).
The note about U-Boot not being able to verify server certificates is
false now that WGET_CACERT and WGET_BUILTIN_CACERT have been added.
Remove it.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Marek Vasut <marek.vasut+renesas@mailbox.org> says:
Rename the environment related variables and add ENV_ prefix, so that
all configuration options which are related to environment would have
an CONFIG_ENV_ prefix. No functional change.
Link: https://lore.kernel.org/r/20250609192701.20260-1-marek.vasut+renesas@mailbox.org
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
There are backslashes in some of the tags which seems to be unnecessary.
Remove then.
Change the word 'either' to 'any' since there are three options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Rasmus Villemoes <ravi@prevas.dk> says:
This started as a rather simple patch, 1/12, adding the ability to
more conveniently do regex matching in shell.
But with that, it became very easy to see what the slre library can
and especially what it cannot do, and that way I found both outright
bugs and a "wow, doesn't it support that syntax" gotcha. I couldn't
find any tests ('git grep slre -- test/' was empty), so I added a
small test suite and tweaked slre.c.
Link: https://lore.kernel.org/r/20250513084034.654865-1-ravi@prevas.dk
Add documentation for the test command, including the newly added =~
operator and some gotchas wrt. the numeric comparisons.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Functions called from EFI applications should not do console output.
Refactor the wget code to implement this requirement. The wget_http_info
struct is used to hold the boolean that signifies whether the output is
allowed or not.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Mention that RISC-V supports semihosting.
Update the link to ARM's semihosting documentation
Update SPDX identifier to current format.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The "commands" are duplicated, so remove one of them
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Note that this undoes the changes of commit cf6d4535cc4c ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Harsha Vardhan V M <h-vm@ti.com> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/20250319084714.335777-1-h-vm@ti.com
Add documentation for the 'fuse' sub-system commands in
doc/usage/cmd/fuse.rst file.
Remove doc/README.fuse file.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
When the ACPI tables come from an earlier bootloader it is helpful to
see whether the checksums are correct or not. Add a -c flag to the
'acpi list' command to support that.
Signed-off-by: Simon Glass <sjg@chromium.org>
doc/uImage.FIT/overlay-fdt-boot.txt does not exist anymore.
Reference the correct section of doc/usage/fit/overlay-fdt-boot.rst.
Fixes: 6f6e8bb695a7 ("doc: Bring in the FIT overlay information")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Since we added support in meminfo to dump live page tables, describe
the only working architecture for now (aarch64) and add links to public
documentation for further reading.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Some boards use a CONFIG option to specify the value of this variable.
This is normally handled by efi_get_distro_fdt_name() but in the case
of sunxi this does not work, since 'soc' is sunxi, but the files are
in the allwinner directory.
Provide a work-around for this particular case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Move default eventlog size from efi to tpm for using in both
efi and measured boot.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> says:
Add the basic 'hello world ta' command which increments the value passed.
This provides easy test for establishing a session with OP-TEE TA and verify.
It includes following subcommands:
optee hello
optee hello <value>; value to increment via OP-TEE HELLO WORLD TA.
Link: https://lore.kernel.org/r/20241219043918.1646095-1-venkatesh.abbarapu@amd.com
The command name was "sbi" instead of "sb" in "doc/usage/cmd/sb.rst",
the file documenting the "sb" command. It is annoying, because the
index in the left panel on the
<https://docs.u-boot.org/en/latest/usage/cmd/sb.html> page shows no
"sb" command, which makes difficult to navigate to the "sb"
documentation.
Fixed the command name: "sbi" -> "sb".
Fixes: ec6d30649cd5 (doc: sandbox: Add docs for the sb command, 2024-10-28)
Signed-off-by: Olivier L'Heureux <olivier.lheureux@mind.be>
Reviewed-by: Simon Glass <sjg@chromium.org>
The bootmenu command can display
* menu entries defined by environment variables
* menu entries defined by UEFI boot options
Not in all cases showing the UEFI boot options is desired.
Provide a new parameter '-e' to select the display of UEFI boot options.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Provide a man-page for the optee command.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
The example in kernel_fdt.rst is inconsistently indented, making it
difficult to read.
Indent the example with the same standard as the other examples:
Four spaces for the ReST code block and for every nesting level.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
The number of bytes may only be specified if a device number id provided.
Correct the formatting.
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
