No need to reset user data length registers in SPL.
In SPL, only the first user data length register is used, so we don't
need to reset all of them.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
In Allwinner SoCs, user data can be added in OOB before each ECC data.
For older SoCs like A10, the user data size was the size of a register
(4 bytes) and was mandatory before each ECC step.
So, the A10 OOB Layout is:
[4Bytes USER_DATA_STEP0] [ECC_STEP0 bytes]
[4bytes USER_DATA_STEP1] [ECC_STEP1 bytes]
...
NB: the BBM is stored at the beginning of the USER_DATA_STEP0.
Now, for H6/H616 NAND flash controller, this user data can have a
different size for each step.
So, we are maximizing the user data length to use as many OOB bytes as
possible.
Fixes: 7d1de9801151 ("mtd: rawnand: sunxi_spl: add support for H6/H616 nand controller")
Fixes: f163da5e6d26 ("mtd: rawnand: sunxi: add support for H6/H616 nand controller")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
In sunxi_nand_chip_init there's quite a lot of kfree/return, it's easy
to forget a kfree(), so use a goto/kfree instead.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
[Andre: rename goto label, keep return 0;]
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In sunxi_nfc_hw_ecc_{read,write}_chunk(), the ECC step was force to 0,
the reason is not trivial to get when reading the code.
The explanation is that, from the NAND flash controller perspective, we
are indeed at step 0 for user data length and ECC errors.
Just add a const value with an explanation to clarify things.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
The user data length (4) used all over the code hard coded.
And sometimes, it's not that trivial to know that it's the user data
length and not something else.
Moreover, for the H6/H616 this value is no more fixed by hardware, but
could be modified.
Using a define here makes the code more readable.
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Add some capability flags for mx25u12835f.
In particular, we are interested in using the lock feature. According to
the datasheet, dual/quad read is also supported.
Signed-off-by: David Lechner <dlechner@baylibre.com>
The SPI_FLASH_SST functionality is a subset of SPI_FLASH_LOCK today, so
express this dependency in Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add is25wx128 and is25lx128 ISSI chips to
spi-nor id table.
Both chips have a size of 16MB but is25wx128
is the 1.8V version and is25lx128 is the 3v
version.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Add a new entry for the IS25WP01GG SPI NOR flash (ID 0x9d7021,
64KB sectors, 2KB page size) with 4K sectors, dual and quad read
support. This flash is used and tested on N5X boards.
Datasheet :
https://www.issi.com/WW/pdf/25LP-WP01GG.pdf
Signed-off-by: Chen Huei Lok <chen.huei.lok@altera.com>
This patch adds support for the ISSI IS25WP02GG QSPI NOR flash device.
Tested on the Versal VMK180
board in dual-parallel QSPI configuration.
Signed-off-by: jeffrey yu <jeyu@issi.com>
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
This patch set primarily removes unused DECLARE_GLOBAL_DATA_PTR
instances.
Many files declare DECLARE_GLOBAL_DATA_PTR and include
asm/global_data.h even though gd is never used. In these cases,
asm/global_data.h is effectively treated as a proxy header, which is
not a good practice.
Following the Include What You Use principle, files should include
only the headers they actually depend on, rather than relying on
global_data.h indirectly. This approach is also adopted in Linux kernel
[1].
The first few patches are prepartion to avoid building break after
remove the including of global_data.h.
A script is for filtering the files:
list=`find . -name "*.[ch]"`
for source in ${list}
do
result=`sed -n '/DECLARE_GLOBAL_DATA_PTR/p' ${source}`
if [ "${result}" == "DECLARE_GLOBAL_DATA_PTR;" ]; then
echo "Found in ${source}"
result=`sed -n '/\<gd\>/p' ${source}`
result2=`sed -n '/\<gd_/p' ${source}`
result3=`sed -n '/\<gd->/p' ${source}`
if [ "${result}" == "" ] && [ "${result2}" == "" ] && [ "${result3}" == "" ];then
echo "Cleanup ${source}"
sed -i '/DECLARE_GLOBAL_DATA_PTR/{N;/\n[[:space:]]*$/d;s/.*\n//;}' ${source}
sed -i '/DECLARE_GLOBAL_DATA_PTR/d' ${source}
sed -i '/global_data.h/d' ${source}
git add ${source}
fi
fi
done
[1] https://lpc.events/event/17/contributions/1620/attachments/1228/2520/Linux%20Kernel%20Header%20Optimization.pdf
CI: https://github.com/u-boot/u-boot/pull/865
Link: https://lore.kernel.org/r/20260209-cleanup-v2-0-73a3a84ddbdb@nxp.com
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>
TARGET namespace is for machines / boards / what-have-you that
building U-Boot for. Simply replace from TARGET to ARCH
make things more clear and proper for ALL SoCFPGA.
Signed-off-by: Brian Sune <briansune@gmail.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
# Conflicts:
# drivers/ddr/altera/Makefile
In theory, for the same vendor, we should use the same instructions as
the spi-nor-core implementation.
Fixes: 72151ad10f8d ("mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte")
Fixes: 5bf3f3dd11db ("mtd: spi-nor: Enable QE bit for ISSI flash")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
These chips are internally made of two/four dies with linear addressing
capabilities to make it transparent to the user that two/four dies were
used. There is one drawback however, the read status operation is racy
as the status bit only gives the active die status and not the status of
the other die. For commands affecting the two dies, it means if another
command is sent too fast after the first die has returned a valid
status (deviation can be up to 200us), the chip will get corrupted/in an
unstable state.
The solution adopted here is to iterate manually over all internal
dies (which takes about 30us per die) until all are ready. This approach
will always be faster than a blind delay which represents the maximum
deviation, while also being totally safe.
A flash-specific hook for the status register read had to be
implemented. Testing with the flash_speed benchmark in Linux shown no
difference with the existing performances (using the regular status read
core function).
As the presence of multiple dies is not filled in these chips SFDP
tables (the table containing the crucial information is optional), we
need to manually wire the hook.
This change is adapted from Linux.
Link: https://lore.kernel.org/all/20250110-winbond-6-12-rc1-nor-volatile-bit-v3-1-735363f8cc7d@bootlin.com/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some Winbond Flash chips share the same device ID. Names are not that
important for the SPI Flash, hence we don't need these duplicate ID
definitions. And the Flash size of w25q512jv is actually wrong. Clean
them up to keep the source file tidy.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
-----BEGIN PGP SIGNATURE-----
iQFNBAABCgA3FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmmF8ScZHGV1Z2VuLmhy
aXN0ZXZAbGluYXJvLm9yZwAKCRAesx4CDqwvyA+fB/wMvrHM7PaWht2WyzQmYwuX
oEZ+riLAXsTpiwWA0TdgbqofBZ9exN/V/atbUKFDx2ia/nfFDaIyEha4PAZztdEb
5UqVggK8QHr3NGhzuRZh14vErop2ICR5AA4tl9zbFm1K5/Ei2U8E1EFeU43utc2x
M5UrT9aWxAjFtpcrwB/aINdrtSIz2KbnSL/Rmei4caLnUO+/+RDQBwk4igLXwQ1m
a7Xbvmmxi9BFEvf+5Qpz8dsPTsonuepLfssEbD2NTYEtMg/tiz1s6F6+k6U6n8Kb
9zCLVTxBatwrppr3yUh8MXQjcvPhkU4o7ojqADZy84XjifHEgg+2niYgk3IdPK5k
=/tuR
-----END PGP SIGNATURE-----
Merge tag 'u-boot-at91-2026.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91
First set of u-boot-at91 features for the 2026.04 cycle:
This small fixes set includes fixing 64 bit builds and some warnings for
the at91 serial driver, and some cleanup on the nand driver.
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> says:
It was noted that a GPT partition with the maximum available partition
number (ex: /dev/mmcblk128) can't be read/write from U-Boot using
read/write commands. Futher investigation shows that the problem is
deeper.
This set of patches fixes uncovered issues.
Link: https://lore.kernel.org/r/20260119223305.3022690-1-mikhail.kshevetskiy@iopsys.eu
mtdpart internally enumerate partitions starting from zero, but partition
driver API enumerate partitions starting from 1, so wrong partition will
be queried. This is wrong.
Unnecessary debug message also was removed.
Fixes: c29a6daec184 ("disk: support MTD partitions")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
According to commit 84a42ae36683 ("dm: core: Rename device node to indicate it is private")
node_ should not be aaccess outside driver model.
Signed-off-by: Andy Yan <andyshrk@163.com>
The H6/H616 boot ROM doesn't expect a SPL scrambled the same way as
older SoCs.
It doesn't use a specific seeds table, it expects a maximized ECC
(BCH-80), a specific BBM (FF000301) and doesn't work if empty pages are
skipped (it needs its specific BBM, even in the padding).
So, add a --soc=h6 option to support H6/616 with:
- more ECC strengths
- specific BBM
- default_scrambler_seeds[] with all values
- no empty pages skip
In Kconfig, select BCH-80 by default for SUNXI_SPL_ECC_STRENGTH to make
BROM happy.
And in scripts/Makefile.xpl, use --soc=h6 option when building for a
SUN50I_GEN_H6 SoC.
Tested on Whatsminer H616 board, booting from NAND.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Co-developed-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The MACRO NFC_PAGE_SHIFT(x) already deals with removing 10 from
nand->page_shift, so it shouldn't be done twice.
Fixes: 4ccae81cdadc ("mtd: nand: Add the sunxi NAND controller driver")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Fix a cast to pointer from integer warning on ARM64
On 64bits platform, the casts done in {read,write}l() give that kind of
warnings:
drivers/mtd/nand/raw/sunxi_nand_spl.c: In function ‘check_value_inner’:
./arch/arm/include/asm/io.h:110:43: warning: cast to pointer from \
integer of different size [-Wint-to-pointer-cast]
110 | #define __raw_readl(a) (*(volatile unsigned int *)(a))
| ^
[...]
drivers/mtd/nand/raw/sunxi_nand_spl.c:81:27: note: in expansion of \
macro ‘readl’
81 | int val = readl(offset) & expected_bits;
Introduce {read,write}l_nfc inline function to do the right cast and
push the base address (SUNXI_NFC_BASE) into those functions, making the
code more readable.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce H6/H616 NAND controller support for SPL
The H616 NAND controller has the same base as A10/A23, with some
differences:
- MDMA is based on chained buffers
- its ECC supports up to 80bit per 1024bytes
- some registers layouts are a bit different, mainly due do the stronger
ECC.
- it uses USER_DATA_LEN registers along USER_DATA registers.
- it needs a specific clock for ECC and MBUS.
For SPL, most of the work was setting the clocks, adding the new
capability structure for H616 and supporting the new USER_DATA_LEN
registers.
Tested on Whatsminer H616 board (with and without scrambling, ECC)
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce H6/H616 NAND controller support for U-Boot
The H616 NAND controller has the same base as A10/A23, with some
differences:
- MDMA is based on chained buffers
- its ECC supports up to 80bit per 1024bytes
- some registers layouts are a bit different, mainly due do the stronger
ECC.
- it uses USER_DATA_LEN registers along USER_DATA registers.
- it needs a specific clock for ECC and MBUS.
Introduce the basic support, with ECC and scrambling, but without
DMA/MDMA.
Tested on Whatsminer H616 board (with and without scrambling, ECC)
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Use generic macros for ECC_MODE and RANDOM_SEED
As H6/H616 registers are different, use more generic macros than hard
coded values specific to A10-like SoC.
No functional changes.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Increase max_oobsize to take into account bigger OOB on 2KiB pages
Some NAND chip (e.g. Kioxia TC58NVG1S3HTA00) have a 2KiB page size +
128 bytes OOB.
In order to detect them, the max_oobsize has to be increased from 64 to
128 bytes.
Tested on Kioxia TC58NVG1S3HTA00 NAND chip on Whatsminer H616 board.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Use defines instead of hardcoded values for NFC_ECC_{ERR_MSK,PAT_FOUND}
SPL is using hard coded values for ECC error detection and empty chunk
detection.
The H6/H616 registers for that have changed, the pattern found is no
more in the NFC_REG_ECC_ST register.
So, don't presume anymore that pattern_found is in NFC_REG_ECC_ST, and
read the pattern_found register to get this information.
Apart from an additional register reading, no functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce NDFC Spare Area Register offset in SoC capabilities
The H6/H616 spare area register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
NFC_RANDOM_{EN,DIRECTION} registers offset moved in H616
Let's make it a SoC capability.
NFC_RANDOM_DIRECTION also moved, but it's unused, just remove it.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce per SoC capabilities in sunxi_nand_spl.c
Prepare for the H616 support that has quite a lot of differences in
registers offset and capabilities.
Start with the 512 bytes ECC capability.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce NDFC Pattern ID Register in capability structure
The H6/H616 pattern ID register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
NFC_ECC_MODE register offset moved in H616, so let's make it a SoC cap
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce has_ecc_block_512 capability
The H616 controller can't handle 512 bytes ECC block size. The
NFC_ECC_BLOCK_512 bit disappeared in H6, and NDFC_RANDOM_EN took its
place.
So, add has_ecc_block_512 capability to only set this bit on SoC having
it.
On the way, let's drop NFC_ECC_BLOCK_SIZE_MSK which was just a mask for
the very same bit.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Move ECC_PAT_FOUND register in SoC capabilities structure
This register offset moved in H616, it's now its own register (@0x3c,
bits 0-31), not shared with NFC_ECC_ST any more (was @0x38 bits 16-31).
Push that specificity in caps structure.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
USER_DATA register offset moved in H616, so let's make it a SoC cap
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
ECC_ERR_CNT register offset moved in H616, so let's make it a SoC cap
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce per SoC capabilities in sunxi_nand.c
This prepares for the H616 support that has quite a lot differences in
registers offset and capabilities.
Start with the ECC strength table.
No functional change.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Merge common register definitions from sunxi_nand{,_spl}.c
The Allwinner NAND controller registers where in both files, so let's
just merge all that in a header, it will be easier for maintenance.
NB: the defines are also harmonized with Linux driver
No functional change
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The sunxi_ccm_reg is legacy, drop its usage from nand related code
For that, CCU_NAND0_CLK_CFG and CCU_AHB_GATE1 are added to the clock
files when missing.
And clock code in sunxi_nand{,_spl}.c and board.c are changed to use the
new scheme.
Moreover, drop AHB_DIV_1 in favor of the more readable CCM_NAND_CTRL_M/N
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Remove unneeded definitions NFC_CMD_R* in sunxi_nand_spl.c
No need to define NFC_CMD_RNDOUTSTART, NFC_CMD_RNDOUT and
NFC_CMD_READSTART here since they are already in linux/mtd/rawnand.h
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Harmonize registers definition in sunxi_nand{,_spl}.c files
This is a first step to then include the same file from both
sunxi_nand{,_spl}.c files
Unused defines are also removed
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Fix pointer from interget warning when compiling for ARM64
When compiling for arm64, we get this error:
error: passing argument 2 of ‘__memcpy_fromio’ makes pointer from
integer without a cast [-Wint-conversion]
Moreover the copy should be made with dedicated readl(), like for any
register access on this peripheral, since they are 32bit wide.
So, instead of memcpy_fromio(), just use a readl() loop.
Introduce nand_readlcpy() to implement this loop.
Fixes: 6ddbb1e936c7 ("spl: nand: sunxi: use PIO instead of DMA")
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Remove 'complete' member from struct sunxi_nfc
The 'complete' member isn't part of the structure, let's remove it.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
