cps_max (max new connections received per second), sps_max (max new
sessions per second) and http.rps_max (maximum new http requests per
second) all rely on shared counters (namely conn_per_sec, sess_per_sec and
http.req_per_sec). The problem is that shared counters are about to be
distributed over thread groups, and we cannot afford to compute the
total (for all thread groups) each time we update the max counters.
Instead, since such max counters (relying on shared counters) are a very
few exceptions, let's add internal (sess,conn,req) per sec freq counters
that are dedicated to cps_max, sps_max and http.rps_max computing.
Thanks to that, related *_max counters shouldn't be negatively impacted
by the thread-group distribution, yet they will not benefit from it
either. Related internal freq counters are prefixed with "_" to emphasize
the fact that they should not be used for other purpose (the shared ones,
which are about to be distributed over thread groups in upcoming commits
are still available and must be used instead). The internal ones could
eventually be removed at any time if we find another way to compute the
{cps,sps,http.rps)_max counters.
Now that we have a common struct between fe and be shared counters struct
let's perform some cleanup to merge duplicate members into the common
struct part. This will ease code maintenance.
proxies, listeners and server shared counters are now managed via helpers
added in one of the previous commits.
When guid is not set (ie: when not yet assigned), shared counters pointer
is allocated using calloc() (local memory) and a flag is set on the shared
counters struct to know how to manipulate (and free it). Else if guid is
set, then it means that the counters may be shared so while for now we
don't actually use a shared memory location the API is ready for that.
The way it works, for proxies and servers (for which guid is not known
during creation), we first call counters_{fe,be}_shared_get with guid not
set, which results in local pointer being retrieved (as if we just
manually called calloc() to retrieve a pointer). Later (during postparsing)
if guid is set we try to upgrade the pointer from local to shared.
Lastly, since the memory location for some objects (proxies and servers
counters) may change from creation to postparsing, let's update
counters->last_change member directly under counters_{fe,be}_shared_get()
so we don't miss it.
No change of behavior is expected, this is only preparation work.
fe_counters_shared and be_counters_shared may share some common members
since they are quite similar, so we add a common struct part shared
between the two. struct counters_shared is added for convenience as
a generic pointer to manipulate common members from fe or be shared
counters pointer.
Also, the first common member is added: shared fe and be counters now
have a flags member.
create include/haproxy/counters.h and src/counters.c files to anticipate
for further helpers as some counters specific tasks needs to be carried
out and since counters are shared between multiple object types (ie:
listener, proxy, server..) we need generic helpers.
Add some shared counters helper which are not yet used but will be updated
in upcoming commits.
Shareable counters are not tagged as shared counters and are dynamically
allocated in separate memory area as a prerequisite for being stored
in shared memory area. For now, GUID and threads groups are not taken into
account, this is only a first step.
also we ensure all counters are now manipulated using atomic operations,
namely, "last_change" counter is now read from and written to using atomic
ops.
Despite the numerous changes caused by the counters being moved away from
counters struct, no change of behavior should be expected.
These functions were copied from the channel API and modified to work with
applets using the new API or the legacy one. However, the comments were
updated accordingly. It is the purpose of this patch.
rename _srv_postparse() internal function to srv_init() function and group
srv_init_per_thr() plus idle conns list init inside it. This way we can
perform some simplifications as srv_init() performs multiple server
init steps after parsing.
SRV_F_CHECKED flag was added, it is automatically set when srv_init()
runs successfully. If the flag is already set and srv_init() is called
again, nothing is done. This permis to manually call srv_init() earlier
than the default POST_CHECK hook when needed without risking to do things
twice.
while new_server() takes the parent proxy as argument and even assigns
srv->proxy to the parent proxy, it didn't actually inserted the server
to the parent proxy server list on success.
The result is that sometimes we add the server to the list after
new_server() is called, and sometimes we don't.
This is really error-prone and because of that hooks such as
REGISTER_POST_SERVER_CHECK() which as run for all servers listed in
all proxies may not be relied upon for servers which are not actually
inserted in their parent proxy server list. Plus it feels very strange
to have a server that points to a proxy, but then the proxy doesn't know
about it because it cannot find it in its server list.
To prevent errors and make proxy->srv list reliable, we move the insertion
logic directly under new_server(). This requires to know if we are called
during parsing or during runtime to either insert or append the server to
the parent proxy list. For that we use PR_FL_CHECKED flag from the parent
proxy (if the flag is set, then the proxy was checked so we are past the
init phase, thus we assume we are called during runtime)
This implies that during startup if new_server() has to be cancelled on
error paths we need to call srv_detach() (which is now exposed in server.h)
before srv_drop().
The consequence of this commit is that REGISTER_POST_SERVER_CHECK() should
not run reliably on all servers created using new_server() (without having
to manually loop on global servers_list)
We have global proxies_list pointer which is announced as the list of
"all existing proxies", but in fact it only represents regular proxies
declared on the config file through "listen, frontend or backend" keywords
It is ambiguous, and we currently don't have a straightforwrd method to
iterate over all proxies (either public or internal ones) within haproxy
Instead we still have to manually iterate over multiple lists (main
proxies, log-forward proxies, peer proxies..) which is error-prone.
In this patch we add a struct list member (8 bytes) inside struct proxy
in order to store every proxy (except default ones) within a global
"proxies" list which is actually representative for all proxies existing
under haproxy process, like we already have for servers.
It is now possile to set a label on a bind line. All sockets attached to
this bind line inherits from this label. The idea is to be able to groud of
sockets. For now, there is no mechanism to create these groups, this must be
done by hand.
Several users already reported that it would be nice to support
strict-sni in ssl-default-bind-options. However, in order to support
it, we also need an option to disable it.
This patch moves the setting of the option from the strict_sni field
to a flag in the ssl_options field so that it can be inherited from
the default bind options, and adds a new "no-strict-sni" directive to
allow to disable it on a specific "bind" line.
The test file "del_ssl_crt-list.vtc" which already tests both options
was updated to make use of the default option and the no- variant to
confirm everything continues to work.
It was mentioned during the development of glitches that it would be
nice to support not killing misbehaving connections below a certain
CPU usage so that poor implementations that routinely misbehave without
impact are not killed. This is now possible by setting a CPU usage
threshold under which we don't kill them via this parameter. It defaults
to zero so that we continue to kill them by default.
Adjust include list in quic_conn-t.h. This file is included in many QUIC
source, so it is useful to keep as lightweight as possible. Note that
connection/QUIC MUX are transformed into forward declaration for better
layer separation.
Insert some missing includes statement in QUIC source files. This was
detected after the next commit which adjust the include list used in
quic_conn-t.h file.
quic-conn layer has to handle itself STREAM frames after MUX release. If
the stream was already seen, it is probably only a retransmitted frame
which can be safely ignored. For other streams, an active closure may be
needed.
Thus it's necessary that quic-conn layer knows the highest stream ID
already handled by the MUX after its release. Previously, this was done
via <nb_streams> member array in quic-conn structure.
Refactor this by replacing <nb_streams> by two members called
<stream_max_uni>/<stream_max_bidi>. Indeed, it is unnecessary for
quic-conn layer to monitor locally opened uni streams, as the peer
cannot by definition emit a STREAM frame on it. Also, bidirectional
streams are always opened by the remote side.
Previously, <nb_streams> were set by quic-stream layer. Now,
<stream_max_uni>/<stream_max_bidi> members are only set one time, just
prior to QUIC MUX release. This is sufficient as quic-conn do not use
them if the MUX is available.
Note that previously, IDs were used relatively to their type, thus
incremented by 1, after shifting the original value. For simplification,
use the plain stream ID, which is incremented by 4.
Move general function to check if a stream is uni or bidirectional from
QUIC MUX to quic_utils module. This should prevent unnecessary include
of QUIC MUX header file in other sources.
The quic_conn struct is modified for two reasons. The first one is to store
the encoded version of the local tranport parameter as this is done for
USE_QUIC_OPENSSL_COMPAT. Indeed, the local transport parameter "should remain
valid until after the parameters have been sent" as mentionned by
SSL_set_quic_tls_cbs(3) manual. In our case, the buffer is a static buffer
attached to the quic_conn object. qc_ssl_set_quic_transport_params() function
whose role is to call SSL_set_tls_quic_transport_params() (aliased by
SSL_set_quic_transport_params() to set these local tranport parameter into
the TLS stack from the buffer attached to the quic_conn struct.
The second quic_conn struct modification is the addition of the new ->prot_level
(SSL protection level) member added to the quic_conn struct to store "the most
recent write encryption level set via the OSSL_FUNC_SSL_QUIC_TLS_yield_secret_fn
callback (if it has been called)" as mentionned by SSL_set_quic_tls_cbs(3) manual.
This patches finally implements the five remaining callacks to make the haproxy
QUIC implementation work.
OSSL_FUNC_SSL_QUIC_TLS_crypto_send_fn() (ha_quic_ossl_crypto_send) is easy to
implement. It calls ha_quic_add_handshake_data() after having converted
qc->prot_level TLS protection level value to the correct ssl_encryption_level_t
(boringSSL API/quictls) value.
OSSL_FUNC_SSL_QUIC_TLS_crypto_recv_rcd_fn() (ha_quic_ossl_crypto_recv_rcd())
provide the non-contiguous addresses to the TLS stack, without releasing
them.
OSSL_FUNC_SSL_QUIC_TLS_crypto_release_rcd_fn() (ha_quic_ossl_crypto_release_rcd())
release these non-contiguous buffer relying on the fact that the list of
encryption level (qc->qel_list) is correctly ordered by SSL protection level
secret establishements order (by the TLS stack).
OSSL_FUNC_SSL_QUIC_TLS_yield_secret_fn() (ha_quic_ossl_got_transport_params())
is a simple wrapping function over ha_quic_set_encryption_secrets() which is used
by boringSSL/quictls API.
OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn() (ha_quic_ossl_got_transport_params())
role is to store the peer received transport parameters. It simply calls
quic_transport_params_store() and set them into the TLS stack calling
qc_ssl_set_quic_transport_params().
Also add some comments for all the OpenSSL 3.5 QUIC API callbacks.
This patch have no impact on the other use of QUIC API provided by the others TLS
stacks.
This patch allows the use of the new OpenSSL 3.5.0 QUIC TLS API when it is
available and detected at compilation time. The detection relies on the presence of the
OSSL_FUNC_SSL_QUIC_TLS_CRYPTO_SEND macro from openssl-compat.h. Indeed this
macro is defined by OpenSSL since 3.5.0 version. It is not defined by quictls.
This helps in distinguishing these two TLS stacks. When the detection succeeds,
HAVE_OPENSSL_QUIC is also defined by openssl-compat.h. Then, this is this new macro
which is used to detect the availability of the new OpenSSL 3.5.0 QUIC TLS API.
Note that this detection is done only if USE_QUIC_OPENSSL_COMPAT is not asked.
So, USE_QUIC_OPENSSL_COMPAT and HAVE_OPENSSL_QUIC are exclusive.
At the same location, from openssl-compat.h, ssl_encryption_level_t enum is
defined. This enum was defined by quictls and expansively used by the haproxy
QUIC implementation. SSL_set_quic_transport_params() is replaced by
SSL_set_quic_tls_transport_params. SSL_set_quic_early_data_enabled() (quictls) is also replaced
by SSL_set_quic_tls_early_data_enabled() (OpenSSL). SSL_quic_read_level() (quictls)
is not defined by OpenSSL. It is only used by the traces to log the current
TLS stack decryption level (read). A macro makes it return -1 which is an
usused values.
The most of the differences between quictls and OpenSSL QUI APIs are in quic_ssl.c
where some callbacks must be defined for these two APIs. This is why this
patch modifies quic_ssl.c to define an array of OSSL_DISPATCH structs: <ha_quic_dispatch>.
Each element of this arry defines a callback. So, this patch implements these
six callabcks:
- ha_quic_ossl_crypto_send()
- ha_quic_ossl_crypto_recv_rcd()
- ha_quic_ossl_crypto_release_rcd()
- ha_quic_ossl_yield_secret()
- ha_quic_ossl_got_transport_params() and
- ha_quic_ossl_alert().
But at this time, these implementations which must return an int return 0 interpreted
as a failure by the OpenSSL QUIC API, except for ha_quic_ossl_alert() which
is implemented the same was as for quictls. The five remaining functions above
will be implemented by the next patches to come.
ha_quic_set_encryption_secrets() and ha_quic_add_handshake_data() have been moved
to be defined for both quictls and OpenSSL QUIC API.
These callbacks are attached to the SSL objects (sessions) calling qc_ssl_set_cbs()
new function. This latter callback the correct function to attached the correct
callbacks to the SSL objects (defined by <ha_quic_method> for quictls, and
<ha_quic_dispatch> for OpenSSL).
The calls to SSL_provide_quic_data() and SSL_process_quic_post_handshake()
have been also disabled. These functions are not defined by OpenSSL QUIC API.
At this time, the functions which call them are still defined when HAVE_OPENSSL_QUIC
is defined.
The current hash involves 3 simple shifts and additions so that it can
be mapped to a multiply on architecures having a fast multiply. This is
indeed what the compiler does on x86_64. A large range of values was
scanned to try to find more optimal factors on machines supporting such
a fast multiply, and it turned out that new factor 0x1af42f resulted in
smoother hashes that provided on average 0.4% better compression on both
the Silesia corpus and an mbox file composed of very compressible emails
and uncompressible attachments. It's even slightly better than CRC32C
while being faster on Skylake. This patch enables this factor on archs
with a fast multiply.
This is slz upstream commit 82ad1e75c13245a835c1c09764c89f2f6e8e2a40.
Building on MIPS64 with clang16 incorrectly reports some uninitialized
value warnings in stats-proxy.c due to some calls to ABORT_NOW() where
the compiler didn't know the code wouldn't return. Let's properly mark
the function as noreturn, and take this opportunity for also marking it
unused to avoid possible warnings depending on the build options (if
ABORT_NOW is not used). No backport needed though it will not harm.
It is especially a problem with Lua filters, but it is important to disable
the 0-copy forwarding if a filter alters the payload, or at least to be able
to disable it. While the filter is registered on the data filtering, it is
not an issue (and it is the common case) because, there is now way to
fast-forward data at all. But it may be an issue if a filter decides to
alter the payload and to unregister from data filtering. In that case, the
0-copy forwarding can be re-enabled in a hardly precdictable state.
To fix the issue, a SC flags was added to do so. The HTTP compression filter
set it and lua filters too if the body length is changed (via
HTTPMessage.set_body_len()).
Note that it is an issue because of a bad design about the HTX. Many info
about the message are stored in the HTX structure itself. It must be
refactored to move several info to the stream-endpoint descriptor. This
should ease modifications at the stream level, from filter or a TCP/HTTP
rules.
This should be backported as far as 3.0. If necessary, it may be backported
on lower versions, as far as 2.6. In that case, it must be reviewed and
adapted.
SPOP_CS_FRAME_H and SPOP_CS_FRAME_P states, that were used to handle frame
parsing, were removed. The demux process now relies on the demux stream ID
to know if it is waiting for the frame header or the frame
payload. Concretly, when the demux stream ID is not set (dsi == -1), the
demuxer is waiting for the next frame header. Otherwise (dsi >= 0), it is
waiting for the frame payload. It is especially important to be able to
properly handle DISCONNECT frames sent by the agents.
SPOP_CS_RUNNING state is introduced to know the hello handshake was finished
and the SPOP connection is able to open SPOP streams and exchange NOTIFY/ACK
frames with the agents.
It depends on the following fixes:
* MINOR: mux-spop: Don't set SPOP connection state to FRAME_H after ACK parsing
* BUG/MINOR: mux-spop: Make the demux stream ID a signed integer
This change will be mandatory for the next fix. It must be backported to 3.1
with the commits above.
A test run on a dual-socket EPYC 9845 (2x160 cores) showed that we'll
be facing new limits during the lifetime of 3.2 with our current 16
groups and 256 threads max:
$ cat test.cfg
global
cpu-policy perforamnce
$ ./haproxy -dc -c -f test.cfg
...
Thread CPU Bindings:
Tgrp/Thr Tid CPU set
1/1-32 1-32 32: 0-15,320-335
2/1-32 33-64 32: 16-31,336-351
3/1-32 65-96 32: 32-47,352-367
4/1-32 97-128 32: 48-63,368-383
5/1-32 129-160 32: 64-79,384-399
6/1-32 161-192 32: 80-95,400-415
7/1-32 193-224 32: 96-111,416-431
8/1-32 225-256 32: 112-127,432-447
Raising the default limit to 1024 threads and 32 groups is sufficient
to buy us enough margin for a long time (hopefully, please don't laugh,
you, reader from the future):
$ ./haproxy -dc -c -f test.cfg
...
Thread CPU Bindings:
Tgrp/Thr Tid CPU set
1/1-32 1-32 32: 0-15,320-335
2/1-32 33-64 32: 16-31,336-351
3/1-32 65-96 32: 32-47,352-367
4/1-32 97-128 32: 48-63,368-383
5/1-32 129-160 32: 64-79,384-399
6/1-32 161-192 32: 80-95,400-415
7/1-32 193-224 32: 96-111,416-431
8/1-32 225-256 32: 112-127,432-447
9/1-32 257-288 32: 128-143,448-463
10/1-32 289-320 32: 144-159,464-479
11/1-32 321-352 32: 160-175,480-495
12/1-32 353-384 32: 176-191,496-511
13/1-32 385-416 32: 192-207,512-527
14/1-32 417-448 32: 208-223,528-543
15/1-32 449-480 32: 224-239,544-559
16/1-32 481-512 32: 240-255,560-575
17/1-32 513-544 32: 256-271,576-591
18/1-32 545-576 32: 272-287,592-607
19/1-32 577-608 32: 288-303,608-623
20/1-32 609-640 32: 304-319,624-639
We can change this default now because it has no functional effect
without any configured cpu-policy, so this will only be an opt-in
and it's better to do it now than to have an effect during the
maintenance phase. A tiny effect is a doubling of the number of
pool buckets and stick-table shards internally, which means that
aside slightly reducing contention in these areas, a dump of tables
can enumerate keys in a different order (hence the adjustment in the
vtc).
The only really visible effect is a slightly higher static memory
consumption (29->35 MB on a small config), but that difference
remains even with 50k servers so that's pretty much acceptable.
Thanks to Erwan Velu for the quick tests and the insights!
Add counters to measure Rx buffers usage per QCS. This reused the newly
defined bdata_ctr type already used for Tx accounting.
Note that for now, <tot> value of bdata_ctr is not used. This is because
it is not easy to account for data accross contiguous buffers.
These values are displayed both on log/traces and "show quic" output.
Add accounting at qc_stream_desc level to be able to report the number
of allocated Tx buffers and the sum of their data. This represents data
ready for emission or already emitted and waiting on ACK.
To simplify this accounting, a new counter type bdata_ctr is defined in
quic_utils.h. This regroups both buffers and data counter, plus a
maximum on the buffer value.
These values are now displayed on QCS info used both on logline and
traces, and also on "show quic" output.
As discussed here:
https://github.com/httpwg/http2-spec/pull/936https://github.com/haproxy/haproxy/issues/2941
It's important to take care of some special characters in the :authority
pseudo header before reassembling a complete URI, because after assembly
it's too late (e.g. the '/').
This patch adds a specific function which was checks all such characters
and their ranges on an ist, and benefits from modern compilers
optimizations that arrange the comparisons into an evaluation tree for
faster match. That's the version that gave the most consistent performance
across various compilers, though some hand-crafted versions using bitmaps
stored in register could be slightly faster but super sensitive to code
ordering, suggesting that the results might vary with future compilers.
This one takes on average 1.2ns per character at 3 GHz (3.6 cycles per
char on avg). The resulting impact on H2 request processing time (small
requests) was measured around 0.3%, from 6.60 to 6.618us per request,
which is a bit high but remains acceptable given that the test only
focused on req rate.
The code was made usable both for H2 and H3.
IPv6 connectivity might start off (e.g. network not fully up when
haproxy starts), so for features like resolvers, it would be nice to
periodically recheck.
With this change, instead of having the resolvers code rely on a variable
indicating connectivity, it will now call a function that will check for
how long a connectivity check hasn't been run, and will perform a new one
if needed. The age was set to 30s which seems reasonable considering that
the DNS will cache results anyway. There's no saving in spacing it more
since the syscall is very check (just a connect() without any packet being
emitted).
The variables remain exported so that we could present them in show info
or anywhere else.
This way, "dns-accept-family auto" will now stay up to date. Warning
though, it does perform some caching so even with a refreshed IPv6
connectivity, an older record may be returned anyway.
This way we can preserve the entire contents of the released area for
later inspection. This automatically enables comparison at reallocation
time as well (like "integrity" does). If used in combination with
integrity, the comparison is disabled but the check of non-corruption
of the area mangled by integrity is still operated.
The automatic scheduler is useful but sometimes you don't want to use,
or schedule manually.
This patch adds an 'acme.scheduler' option in the global section, which
can be set to either 'auto' or 'off'. (auto is the default value)
This also change the ouput of the 'acme status' command so it does not
shows scheduled values. The state will be 'Stopped' instead of
'Scheduled'.
The new MEM_F_UAF flag can be set just after a pool's creation to make
this pool UAF for debugging purposes. This allows to maintain a better
overall performance required to reproduce issues while still having a
chance to catch UAF. It will only be used by developers who will manually
add it to areas worth being inspected, though.
Extend API used for QUIC transport parameter decoding. This is done via
the introduction of a dedicated enum to report the various error
condition detected. No functional change should occur with this patch,
as the only returned code is QUIC_TP_DEC_ERR_TRUNC, which results in the
connection closure via a TLS alert.
This patch will be necessary to properly reject transport parameters
with the proper CONNECTION_CLOSE error code. As such, it should be
backported up to 2.6 with the following series.
In order to make the lock history a bit more useful, let's try to merge
adjacent lock/unlock sequences that don't change anything for other
threads. For this we can replace the last unlock with the new operation
on the same label, and even just not store it if it was the same as the
one before the unlock, since in the end it's the same as if the unlock
had not been done.
Now loops that used to be filled with "R:LISTENER U:LISTENER" show more
useful info such as:
S:IDLE_CONNS U:IDLE_CONNS S:PEER U:PEER S:IDLE_CONNS U:IDLE_CONNS R:LISTENER U:LISTENER
U:STK_TABLE W:STK_SESS U:STK_SESS R:STK_TABLE U:STK_TABLE W:STK_SESS U:STK_SESS R:STK_TABLE
R:STK_TABLE U:STK_TABLE W:STK_SESS U:STK_SESS W:STK_TABLE_UPDT U:STK_TABLE_UPDT S:PEER
It's worth noting that it can sometimes induce confusion when recursive
locks of the same label are used (a few exist on peers or stick-tables),
as in such a case the two operations would be needed. However these ones
are already undebuggable, so instead they will just have to be renamed
to make sure they use a distinct label.
Most threads are filled with "R:OTHER U:OTHER" in their history. Since
anything non-important can use other it's not observable but it pollutes
the history. Let's just drop OTHER entirely during the recording.
There is a lot of contention trying to add updates to the tree. So
instead of trying to add the updates to the tree right away, just add
them to a mt-list (with one mt-list per thread group, so that the
mt-list does not become the new point of contention that much), and
create a tasklet dedicated to adding updates to the tree, in batchs, to
avoid keeping the update lock for too long.
This helps getting stick tables perform better under heavy load.
quic_conn_release() may, or may not, free the tasklet associated with
the connection. So make it return 1 if it was, and 0 otherwise, so that
if it was called from the tasklet handler itself, the said handler can
act accordingly and return NULL if the tasklet was destroyed.
This should be backported if 9240cd4a27
is backported.
Add an extra parametre to conn_create_mux(), "closed_connection".
If a pointer is provided, then let it know if the connection was closed.
Callers have no way to determine that otherwise, and we need to know
that, at least in ssl_sock_io_cb(), as if the connection was closed we
need to return NULL, as the tasklet was free'd, otherwise that can lead
to memory corruption and crashes.
This should be backported if 9240cd4a27
is backported too.
TASK_QUEUED was used to mean "the task has been scheduled to run",
TASK_IN_LIST was used to mean "the tasklet has been scheduled to run",
remove TASK_IN_LIST and just use TASK_QUEUED for tasklets instead.
This commit is just cosmetic, and should not have any impact.
Implement a way to display the running acme tasks over the CLI.
It currently only displays a "Running" status with the certificate name
and the acme section from the configuration.
The displayed running tasks are limited to the size of a buffer for now,
it will require a backref list later to be called multiple times to
resume the list.
When called, this function will try to enforce a yield (if available) as
soon as possible. Indeed, automatic yield is already enforced every X
Lua instructions. However, there may be some cases where we know after
running heavy operation that we should yield already to avoid taking too
much CPU at once.
This is what this function offers, instead of asking the user to manually
yield using "core.yield()" from Lua itself after using an expensive
Lua method offered by haproxy, we can directly enforce the yield without
the need to do it in the Lua script.
The previous commit has implemented a new calcul method for
MAX_STREAM_DATA frame emission. Now, a frame may be emitted as soon as a
buffer was consumed by a QCS instance.
This will probably increase the number of MAX_STREAM_DATA frame
emission. It may even cause a series of frame emitted for the same
stream with increasing values under high load, which is completely
unnecessary.
To improve this, limit the number of MAX_STREAM_DATA frames built to one
per QCS instance. This is implemented by storing a reference to this
frame in QCS structure via a new member <tx.msd_frm>.
Note that to properly reset QCS msd_frm member, emission of flow-control
frames have been changed. Now, each frame is emitted individually. On
one side, it is better as it prevent to emit frames related to different
streams in a single datagram, which is not desirable in case of packet
loss. However, this can also increase sendto() syscall invocation.
Recently, QCS Rx allocation buffer method has been improved. It is now
possible to allocate multiple buffers per QCS instances, which was
necessary to improve HTTP/3 POST throughput.
However, a limitation remained related to the emission of
MAX_STREAM_DATA. These frames are only emitted once at least half of the
receive capacity has been consumed by its QCS instance. This may be too
restrictive when a client need to upload a large payload.
Improve this by adjusting MAX_STREAM_DATA allocation. If QCS capacity is
still limited to 1 or 2 buffers max, the old calcul is still used. This
is necessary when user has limited upload throughput via their
configuration. If QCS capacity is more than 2 buffers, a new frame is
emitted if at least a buffer was consumed.
This patch has reduced number of STREAM_DATA_BLOCKED frames received in
POST tests with some specific clients.
We had to parse the sigAlg extension by hand in order to properly select
the certificate used by the SSL frontends. These traces allow to dump
the allowed sigAlg list sent by the client in its clientHello.
This callback allows to pick the used certificate on an SSL frontend.
The certificate selection is made according to the information sent by
the client in the clientHello. The traces that were added will allow to
better understand what certificate was chosen and why. It will also warn
us if the chosen certificate was the default one.
The actual certificate parsing happens in ssl_sock_chose_sni_ctx. It's
in this function that we actually get the filename of the certificate
used.
If OCSP stapling fails because of a missing or invalid OCSP response we
used to silently disable stapling for the given session. We can now know
a bit more what happened regarding OCSP stapling.
Those traces dump information about the multiple SSL_do_handshake calls
(renegotiation and regular call). Some errors coud also be dumped in
case of rejected early data.
Depending on the chosen verbosity, some information about the current
handshake can be dumped as well (servername, tls version, chosen cipher
for instance).
In case of failed handshake, the error codes and messages will also be
dumped in the log to ease debugging.
Add a dedicated trace for some unlikely allocation failures and async
errors. Those traces will ostly be used to identify the start and end of
a given SSL connection.
This function can be used to convert a TLSv1.3 sigAlg entry (2bytes)
from the signature_agorithms client hello extension into a string.
In order to ease debugging, some TLSv1.2 combinations can also be
dumped. In TLSv1.2 those signature algorithms pairs were built out of a
one byte signature identifier combined to a one byte hash identifier.
In TLSv1.3 those identifiers are two bytes blocs that must be treated as
such.
In relation to issue #2954, it appears that turning some size_t length
calculations to the int that uses my_strndup() upsets coverity a bit.
Instead of dealing with such warnings each time, better address it at
the root. An inspection of all call places show that the size passed
there is always positive so we can safely use an unsigned type, and
size_t will always suit it like for strndup() where it's available.
when dns session callback (dns_session_release()) is called upon error
(ie: when some pending queries were not sent), we try our best to
re-create the applet in order to preserve the pending queries and give
them a chance to be retried. This is done at the end of
dns_session_release().
However, doing so exposes to an issue: if the error preventing queries
from being sent is still encountered over and over the dns session could
stay there indefinitely. Meanwhile, other dns sessions may be created on
the same dns_stream_server periodically. If previous failing dns sessions
don't terminate but we also keep creating new ones, we end up accumulating
failing sessions on a given dns_stream_server, which can eventually cause
ressource shortage.
This issue was found when trying to address ("BUG/MINOR: dns: add tempo
between 2 connection attempts for dns servers")
To fix it, we track the number of failed consecutive sessions for a given
dns server. When we reach the threshold (set to 100), we consider that the
link to the dns server is broken (at least temporarily) and we force
dns_session_new() to fail, so that we stop creating new sessions until one
of the existing one eventually succeeds.
A workaround for this fix consists in setting the "maxconn" parameter on
nameserver directive (under resolvers section) to a reasonnable value so
that no more than "maxconn" sessions may co-exist on the same server at
a given time.
This may be backported to all stable versions.
("CLEANUP: dns: remove unused dns_stream_server struct member") may be
backported to ease the backport.
The stateless mode which was documented previously in the ACME example
is not convenient for all use cases.
First, when HAProxy generates the account key itself, you wouldn't be
able to put the thumbprint in the configuration, so you will have to get
the thumbprint and then reload.
Second, in the case you are using multiple account key, there are
multiple thumbprint, and it's not easy to know which one you want to use
when responding to the challenger.
This patch allows to configure a map in the acme section, which will be
filled by the acme task with the token corresponding to the challenge,
as the key, and the thumbprint as the value. This way it's easy to reply
the right thumbprint.
Example:
http-request return status 200 content-type text/plain lf-string "%[path,field(-1,/)].%[path,field(-1,/),map(virt@acme)]\n" if { path_beg '/.well-known/acme-challenge/' }
Define a new settings tune.quic.frontend.max-tot-window. It contains a
size argument which can be used to set a limit on the sum of all QUIC
connections congestion window. This is applied both on
quic_cc_path_set() and quic_cc_path_inc().
Note that this limitation cannot reduce a congestion window more than
the minimal limit which is set to 2 datagrams.
Use the newly defined cshared type to account for the sum of congestion
window of every QUIC connection. This value is stored in global counter
quic_mem_global defined in proto_quic module.
Define a new type "struct cshared". This can be used as a tool to
manipulate a global counter with thread-safety ensured. Each thread
would declare its thread-local cshared type, which would point to a
global counter.
Each thread can then add/substract value to their owned thread-local
cshared instance via cshared_add(). If the difference exceed a
configured limit, either positively or negatively, the global counter is
updated and thread-local instance is reset to 0. Each thread can safely
read the global counter value using cshared_read().
Congestion window is limit by a minimal and maximum values which can
never be exceeded. Min value is hardcoded to 2 datagrams as recommended
by the specification. Max value is specified via haproxy configuration.
These values must be respected each time the congestion window size is
adjusted. However, in some rare occasions, limit were not always
enforced. Fix this by implementing wrappers to set or increment the
congestion window. These functions ensure limits are always applied
after the operation.
Additionnally, wrappers also ensure that if window reached a new maximum
value, it is saved in <cwnd_last_max> field.
This should be backported up to 2.6, after a brief period of
observation.
There was some possible confusion between fields related to congestion
window size min and max limit which cannot be exceeded, and the maximum
value previously reached by the window.
Fix this by adopting a new naming scheme. Enforced limit are now renamed
<limit_max>/<limit_min>, while the previously reached max value is
renamed <cwnd_last_max>.
This should be backported up to 3.1.
TCP_NOTSENT_LOWAT is very convenient as it indicates when to report
EAGAIN on the sending side. It takes a margin on top of the estimated
window, meaning that it's no longer needed to store too many data in
socket buffers. Instead there's just enough to fill the send window
and a little bit of margin to cover the scheduling time to restart
sending. Experiments on a 100ms network have shown a 10-fold reduction
in the memory used by socket buffers by just setting this value to
tune.bufsize, without noticing any performance degradation. Theoretically
the responsiveness on multiplexed protocols such as H2 should also be
improved.
The CLI's "prompt" command toggles two distinct things:
- displaying or hiding the prompt at the beginning of the line
- single-command vs interactive mode
These are two independent concepts and the prompt mode doesn't
always cope well with tools that would like to upload data without
having to read the prompt on return. Also, the master command line
works in interactive mode by default with no prompt, which is not
consistent (and not convenient for tools). So let's start by splitting
the bit in two, and have a new APPCTX_CLI_ST1_INTER flag dedicated
to the interactive mode. For now the "prompt" command alone continues
to toggle the two at once.
We add __equals_0(NAME) which is only true if NAME is defined as zero,
and __def_as_empty(NAME) which is only true if NAME is defined as an
empty string.
Setting DEBUG_THREAD to 1 allows recording the lock history for each
thread. Tests have shown that (as predicted) the cost of updating a
single thread-local variable is not perceptible in the noise, especially
when compared to the cost of obtaining a lock. Since this can provide
useful value when debugging deadlocks, let's enable it by default when
threads are enabled.
This will display the lock labels and modes for each non-empty step
at the end of "show threads" when these are defined. This allows to
emit up to the last 8 locking operation for each thread on 64 bit
machines.
by only storing a word in each thread context, we can keep the history
of all taken/dropped locks by label. This is expected to be very cheap
and to permit to store up to 8 consecutive lock operations in 64 bits.
That should significantly help detect recursive locks as well as figure
what thread was likely to hinder another one waiting for a lock.
For now we only store the final state of the lock, we don't store the
attempt to get it. It's just a matter of space since we already need
4 ops (rd,sk,wr,un) which take 2 bits, leaving max 64 labels. We're
already around 45. We could also multiply by 5 and still keep 8 bits
total per lock, that would limit us to 51 locks max. It seems that
most of the time if we get a watchdog panic, anyway the victim thread
will be perfectly located so that we don't need a specific value for
this. Another benefit is that we perform a single memory write per
lock.
We now default the value to zero and make sure all tests properly take
care of values above zero. This is in preparation for supporting several
degrees of debugging.
Parse the Retry-After header in response and store it in order to use
the value as the next delay for the next retry, fallback to 3s if the
value couldn't be parse or does not exist.
Instead of always having to force IPv4 or IPv6, let's now also offer
"auto" which will only enable IPv6 if the system has a default gateway
for it. This means that properly configured dual-stack systems will
default to "ipv4,ipv6" while those lacking a gateway will only use
"ipv4". Note that no real connectivity test is performed, so firewalled
systems may still get it wrong and might prefer to rely on a manual
"ipv4" assignment.
In order to ease dual-stack deployments, we could at least try to
check if ipv6 seems to be reachable. For this we're adding a test
based on a UDP connect (no traffic) on port 53 to the base of
public addresses (2001::) and see if the connect() is permitted,
indicating that the routing table knows how to reach it, or fails.
Based on this result we're setting a global variable that other
subsystems might use to preset their defaults.
In order to ease troubleshooting and testing, the new "-4" command line
argument enforces queries and processing of "A" DNS records only, i.e.
those representing IPv4 addresses. This can be useful when a host lack
end-to-end dual-stack connectivity. This overrides the global
"dns-accept-family" directive and is equivalent to value "ipv4".
By default, DNS resolvers accept both IPv4 and IPv6 addresses. This can be
influenced by the "resolve-prefer" keywords on server lines as well as the
family argument to the "do-resolve" action, but that is only a preference,
which does not block the other family from being used when it's alone. In
some environments where dual-stack is not usable, stumbling on an unreachable
IPv6-only DNS record can cause significant trouble as it will replace a
previous IPv4 one which would possibly have continued to work till next
request. The "dns-accept-family" global option permits to enforce usage of
only one (or both) address families. The argument is a comma-delimited list
of the following words:
- "ipv4": query and accept IPv4 addresses ("A" records)
- "ipv6": query and accept IPv6 addresses ("AAAA" records)
When a single family is used, no request will be sent to resolvers for the
other family, and any response for the othe family will be ignored. The
default value is "ipv4,ipv6", which effectively enables both families.
There are several fields in the appctx structure only used by the CLI. To
make things cleaner, all these fields are now placed in a dedicated context
inside the appctx structure. The final goal is to move it in the service
context and add an API for cli commands to get a command coontext inside the
cli context.
CLI_ST_GETREQ state was renamed into CLI_ST_PARSE_CMDLINE and CLI_ST_PARSEREQ
into CLI_ST_PROCESS_CMDLINE to reflect the real action performed in these
states.
Before this patch, when pipelined commands were received, each command was
parsed and then excuted before moving to the next command. Pending commands
were not copied in the input buffer of the applet. The major issue with this
way to handle commands is the impossibility to consume inputs from commands
with an I/O handler, like "show events" for instance. It was working thanks
to a "bug" if such commands were the last one on the command line. But it
was impossible to use them followed by another command. And this prevents us
to implement any streaming support for CLI commands.
So we decided to refactor the command line parsing to have something similar
to a basic shell. Now an entire line is parsed, including the payload,
before starting commands execution. The command line is copied in a
dedicated buffer. "appctx->chunk" buffer is used for this purpose. It was an
unsed field, so it is safe to use it here. Once the command line copied, the
commands found on this line are executed. Because the applet input buffer
was flushed, any input can be safely consumed by the CLI applet and is
available for the command I/O handler. Thanks to this change, "show event
-w" command can be followed by a command. And in theory, it should be
possible to implement commands supporting input data streaming. For
instance, the Tetris like lua applet can be used on the CLI now.
Note that the payload, if any, is part of the command line and must be fully
received before starting the commands processing. It means there is still
the limitation to a buffer, but not only for the payload but for the whole
command line. The payload is still necessarily at the end of the command
line and is passed as argument to the last command. Internally, the
"appctx->cli_payload" field was introduced to point on the payload in the
command line buffer.
This patch is quite huge but it cannot easily be splitted. It should not
introduced significant changes.
Add an experimental "https" log-format for the httpclient, it is not
used by the httpclient by default, but could be define in a customized
proxy.
The string is basically a httpslog, with some of the fields replaced by
their backend equivalent or - when not available:
"%ci:%cp [%tr] %ft -/- %TR/%Tw/%Tc/%Tr/%Ta %ST %B %CC %CS %tsc %ac/%fc/%bc/%sc/%rc %sq/%bq %hr %hs %{+Q}r %[bc_err]/%[ssl_bc_err,hex]/-/-/%[ssl_bc_is_resumed] -/-/-"
Since the commit "MINOR: hlua/h1: Use http_parse_cont_len_header() to parse
content-length value", this function is no longer used. So it can be safely
removed.
In RFC9110, it is stated that trailers could be merged with the
headers. While it should be performed with a speicial care, it may be a
problem for some applications. To avoid any trouble with such applications,
two new options were added to drop trailers during the message forwarding.
On the backend, "http-drop-request-trailers" option can be enabled to drop
trailers from the requests before sending them to the server. And on the
frontend, "http-drop-response-trailers" option can be enabled to drop
trailers from the responses before sending them to the client. The options
can be defined in defaults sections and disabled with "no" keyword.
This patch should fix the issue #2930.
To handle out-of-order received CRYPTO frames, a ncbuf instance is
allocated. This is done via the helper quic_get_ncbuf().
Buffer allocation was improperly checked. In case b_alloc() fails, it
crashes due to a BUG_ON(). Fix this by removing it. The function now
returns NULL on allocation failure, which is already properly handled in
its caller qc_handle_crypto_frm().
This should fix the last reported crash from github issue #2935.
This must be backported up to 2.6.
When using the round-robin load balancer, the major source of contention
is the lbprm lock, that has to be held every time we pick a server.
To mitigate that, make it so there are one tree per thread-group, and
one lock per thread-group. That means we now have a lb_fwrr_per_tgrp
structure that will contain the two lb_fwrr_groups (active and backup) as well
as the lock to protect them in the per-thread lbprm struct, and all
fields in the struct server are now moved to the per-thread structure
too.
Those changes are mostly mechanical, and brings good performances
improvment, on a 64-cores AMD CPU, with 64 servers configured, we could
process about 620000 requests par second, and we now can process around
1400000 requests per second.
Add a new structure in the per-thread groups proxy structure, that will
contain whatever is per-thread group in lbprm.
It will be accessed as p->per_tgrp[tgid].lbprm.
