There are plenty of places (particularly in debug code) where we try to
dump the connection's FD only when the connection is defined. That's
already a pain but now it gets one step further with QUIC because we do
*not* want to dump this FD in this case.
conn_fd() checks if the connection exists, is ready and is not fd-less,
and returns the FD only in this case, otherwise returns -1. This aims at
simplifying most of these conditions.
QUIC connections do not use a file descriptor, instead they use the
quic equivalent which is the quic_conn. A number of our historical
functions at the connection level continue to unconditionally touch
the file descriptor and this may have consequences once QUIC starts
to be used.
This patch adds a new flag on QUIC connections, CO_FL_FDLESS, to
mention that the connection doesn't have a file descriptor, hence the
FD-based API must never be used on them.
From now on it will be possible to intrument existing functions to
panic when this flag is present.
The OpenSSL engine API is deprecated starting with OpenSSL 3.0.
In order to have a clean build this feature is now disabled by default.
It can be reactivated with USE_ENGINE=1 on the build line.
The new 'close-spread-time' global option can be used to spread idle and
active HTTP connction closing after a SIGUSR1 signal is received. This
allows to limit bursts of reconnections when too many idle connections
are closed at once. Indeed, without this new mechanism, in case of
soft-stop, all the idle connections would be closed at once (after the
grace period is over), and all active HTTP connections would be closed
by appending a "Connection: close" header to the next response that goes
over it (or via a GOAWAY frame in case of HTTP2).
This patch adds the support of this new option for HTTP as well as HTTP2
connections. It works differently on active and idle connections.
On active connections, instead of sending systematically the GOAWAY
frame or adding the 'Connection: close' header like before once the
soft-stop has started, a random based on the remainder of the close
window is calculated, and depending on its result we could decide to
keep the connection alive. The random will be recalculated for any
subsequent request/response on this connection so the GOAWAY will still
end up being sent, but we might wait a few more round trips. This will
ensure that goaways are distributed along a longer time window than
before.
On idle connections, a random factor is used when determining the expire
field of the connection's task, which should naturally spread connection
closings on the time window (see h2c_update_timeout).
This feature request was described in GitHub issue #1614.
This patch should be backported to 2.5. It depends on "BUG/MEDIUM:
mux-h2: make use of http-request and keep-alive timeouts" which
refactorized the timeout management of HTTP2 connections.
We modify the key update feature implementation to support reusable cipher contexts
as this is done for the other cipher contexts for packet decryption and encryption.
To do so we attach a context to the quic_tls_kp struct and initialize it each time
the underlying secret key is updated. Same thing when we rotate the secrets keys,
we rotate the contexts as the same time.
Add ->ctx new member field to quic_tls_secrets struct to store the cipher context
for each QUIC TLS context TX/RX parts.
Add quic_tls_rx_ctx_init() and quic_tls_tx_ctx_init() functions to initialize
these cipher context for RX and TX parts respectively.
Make qc_new_isecs() call these two functions to initialize the cipher contexts
of the Initial secrets. Same thing for ha_quic_set_encryption_secrets() to
initialize the cipher contexts of the subsequent derived secrets (ORTT, Handshake,
1RTT).
Modify quic_tls_decrypt() and quic_tls_encrypt() to always use the same cipher
context without allocating it each time they are called.
Define a new API to notify the MUX from the quic-conn when the
connection is about to be closed. This happens in the following cases :
- on idle timeout
- on CONNECTION_CLOSE emission or reception
The MUX wake callback is called on these conditions. The quic-conn
QUIC_FL_NOTIFY_CLOSE is set to only report once. On the MUX side,
connection flags CO_FL_SOCK_RD_SH|CO_FL_SOCK_WR_SH are set to interrupt
future emission/reception.
This patch is the counterpart to
"MEDIUM: mux-quic: report CO_FL_ERROR on send".
Now the quic-conn is able to report its closing, which may be translated
by the MUX into a CO_FL_ERROR on the connection for the upper layer.
This allows the MUX to properly react to the QUIC closing mechanism for
both idle-timeout and closing/draining states.
Complete the error reporting. For each attached streams, if CO_FL_ERROR
is set, mark them with CS_FL_ERR_PENDING|CS_FL_ERROR. This will notify
the upper layer to trigger streams detach and release of the MUX.
This reporting is implemented in a new function qc_wake_some_streams(),
called by qc_wake(). This ensures that a lower-layer error is quickly
reported to the individual streams.
Add a new app layer operation is_active. This can be used by the MUX to
check if the connection can be considered as active or not. This is used
inside qcc_is_dead as a first check.
For example on HTTP/3, if there is at least one bidir client stream
opened the connection is active. This explicitly ignore the uni streams
used for control and qpack as they can never be closed during the
connection lifetime.
Improve timeout handling on the MUX. When releasing a stream, first
check if the connection can be considered as dead and should be freed
immediatly. This allows to liberate resources faster when possible.
If the connection is still active, ensure there is no attached
conn-stream before scheduling the timeout. To do this, add a nb_cs field
in the qcc structure.
This flag was used to notify the MUX about a CONNECTION_CLOSE frame
reception. It is now unused on the MUX side and can be removed. A new
mechanism to detect quic-conn closing will be soon implemented.
Rationalize the lifetime of the quic-conn regarding with the MUX. The
quic-conn must not be freed if the MUX is still allocated.
This simplify the MUX code when accessing the quic-conn and removed
possible segfaults.
To implement this, if the quic-conn timer expired, the quic-conn is
released only if the MUX is not allocated. Else, the quic-conn is
flagged with QUIC_FL_CONN_EXP_TIMER. The MUX is then responsible
to call quic_close() which will free the flagged quic-conn.
New received packets after sending CONNECTION_CLOSE frame trigger a new
CONNECTION_CLOSE frame to be sent. Each time such a frame is sent we
increase the number of packet required to send another CONNECTION_CLOSE
frame.
Rearm only one time the idle timer when sending a CONNECTION_CLOSE frame.
This should be useful to have an idea of the list of frames which could be built
towards the list of available frames when building packets.
Same thing about the frames which could not be built because of a lack of room
in the TX buffer.
Due to a erroneous interpretation of the RFC 9000 (quic-transport), ACKs frames
were always sent only after having received two ack-eliciting packets.
This could trigger useless retransmissions for tail packets on the peer side.
For now on, we send as soon as possible ACK frames as soon as we have ACK to send,
in the same packets as the ack-eliciting frame packets, and we also send ACK
frames after having received 2 ack-eliciting packets since the last time we sent
an ACK frame with other ack-eliciting frames.
As such variables are handled by the QUIC connection I/O handler which runs
always on the thread, there is no need to continue to use such atomic operations
The new qc_stream_desc type has a tree node for storage. Thus, we can
remove the node in the qcs structure.
When initializing a new stream, it is stored into the qcc streams_by_id
tree. When the MUX releases it, it will freed as soon as its buffer is
emptied. Before this, the quic-conn is responsible to store it inside
its own streams_by_id tree.
Move the xprt-buf and ack related fields from qcs to the qc_stream_desc
structure. In exchange, qcs has a pointer to the low-level stream. For
each new qcs, a qc_stream_desc is automatically allocated.
This simplify the transport layer by removing qcs/mux manipulation
during ACK frame parsing. An additional check is done to not notify the
MUX on sending if the stream is already released : this case may now
happen on retransmission.
To complete this change, the quic_stream frame now references the
quic_stream instance instead of a qcs.
Currently, the mux qcs streams manage the Tx buffering, even after
sending it to the transport layer. Buffers are emptied when
acknowledgement are treated by the transport layer. This complicates the
MUX liberation and we may loose some data after the MUX free.
Change this paradigm by moving the buffering on the transport layer. For
this goal, a new type is implemented as low-level stream at the
transport layer, as a counterpart of qcs mux instances. This structure
is called qc_stream_desc. This will allow to free the qcs/qcc instances
without having to wait for acknowledge reception.
For the moment, the quic-conn is responsible to store the qc_stream_desc
in a new tree named streams_by_id. This will sligthly change in the next
commits to remove the qcs node which has a similar purpose :
qc_stream_desc instances will be shared between the qcc MUX and the
quic-conn.
This patch only introduces the new type definition and the function to
manipulate it. The following commit will bring the rearchitecture in the
qcs structure.
Define a new callback release inside qcc_app_ops. It is called when the
qcc MUX is freed via qc_release. This will allows to implement cleaning
on the app layer.
Regroup some cleaning operations inside a new function qcs_free. This
can be used for all streams, both through qcs_destroy and with
uni-directional streams.
The CertCache.set() function allows to update an SSL certificate file
stored in the memory of the HAProxy process. This function does the same
as "set ssl cert" + "commit ssl cert" over the CLI.
This could be used to update the crt and key, as well as the OCSP, the
SCTL, and the OSCP issuer.
The implementation does yield every 10 ckch instances, the same way the
"commit ssl cert" do.
Extract the code that replace the ckch_store and its dependencies into
the ckch_store_replace() function.
This function must be used under the global ckch lock.
It frees everything related to the old ckch_store.
The new function dump_act_rules() now dumps the list of actions supported
by a ruleset. These actions are alphanumerically sorted first so that the
produced output is easy to compare.
When trying to sort sets of strings, it's often needed to required to
compare 3 strings to see if the chosen one fits well between the two
others. That's what this function does, in addition to being able to
ignore extremities when they're NULL (typically for the first iteration
for example).
Similar to the sample fetch keywords, let's also list the converter
keywords. They're much simpler since there's no compatibility matrix.
Instead the input and output types are listed. This is called by
dump_registered_keywords() for the "cnv" keywords class.
New function smp_dump_fetch_kw lists registered sample fetch keywords
with their compatibility matrix, mandatory and optional argument types,
and output types. It's called from dump_registered_keywords() with class
"smp".
New function acl_dump_kwd() dumps the registered ACL keywords and their
sample-fetch equivalent to stdout. It's called by dump_registered_keywords()
for keyword class "acl".
New function cli_list_keywords() scans the list of registered CLI keywords
and dumps them on stdout. It's now called from dump_registered_keywords()
for the class "cli".
Some keywords are valid for the master, they'll be suffixed with
"[MASTER]". Others are valid for the worker, they'll have "[WORKER]".
Those accessible only in expert mode will show "[EXPERT]" and the
experimental ones will show "[EXPERIM]".
All registered config keywords that are valid in the config parser are
dumped to stdout organized like the regular sections (global, listen,
etc). Some keywords that are known to only be valid in frontends or
backends will be suffixed with [FE] or [BE].
All regularly registered "bind" and "server" keywords are also dumped,
one per "bind" or "server" line. Those depending on ssl are listed after
the "ssl" keyword. Doing so required to export the listener and server
keyword lists that were static.
The function is called from dump_registered_keywords() for keyword
class "cfg".
It's difficult from outside haproxy to detect the supported keywords
and syntax. Interestingly, many of our modern keywords are enumerated
since they're registered from constructors, so it's not very hard to
enumerate most of them.
This patch creates some basic infrastructure to support dumping existing
keywords from different classes on stdout. The format will differ depending
on the classes, but the idea is that the output could easily be passed to
a script that generates some simple syntax highlighting rules, completion
rules for editors, syntax checkers or config parsers.
The principle chosen here is that if "-dK" is passed on the command-line,
at the end of the parsing the registered keywords will be dumped for the
requested classes passed after "-dK". Special name "help" will show known
classes, while "all" will execute all of them. The reason for doing that
after the end of the config processor is that it will also enumerate
internally-generated keywords, Lua or even those loaded from external
code (e.g. if an add-on is loaded using LD_PRELOAD). A typical way to
call this with a valid config would be:
./haproxy -dKall -q -c -f /path/to/config
If there's no config available, feeding /dev/null will also do the job,
though it will not be able to detect dynamically created keywords, of
course.
This patch also updates the management doc.
For now nothing but the help is listed, various subsystems will follow
in subsequent patches.
Move all inline functions with trace from quic_loss.h to a dedicated
object file. This let to remove the TRACE_SOURCE macro definition
outside of the include file.
This change is required to be able to define another TRACE_SOUCE inside
the mux_quic.c for a dedicated trace module.
This commit is similar to the previous one but with MAX_DATA frames.
This allows to increase the connection level flow-control limit. If the
connection was blocked due to QC_CF_BLK_MFCTL flag, the flag is reseted.
Implement a MUX method to parse MAX_STREAM_DATA. If the limit is greater
than the previous one and the stream was blocked, the flag
QC_SF_BLK_SFCTL is removed.
This commit is similar to the previous one, but this time on the
connection level instead of the stream.
When the connection limit is reached, the connection is flagged with
QC_CF_BLK_MFCTL. This flag is checked in qc_send.
qcs_push_frame uses a new parameter which is used to not exceed the
connection flow-limit while calling it repeatdly over multiple streams
instance before transfering data to the transport layer.
Implement the flow-control max-streams-data limit on emission. We ensure
that we never push more than the offset limit set by the peer. When the
limit is reached, the stream is marked as blocked with a new flag
QC_SF_BLK_SFCTL to disable emission.
Currently, this is only implemented for bidirectional streams. It's
required to unify the sending for unidirectional streams via
qcs_push_frame from the H3 layer to respect the flow-control limit for
them.
Rename the fields used for flow-control in the qcc structure. The
objective is to have shorter name for better readability while keeping
their purpose clear. It will be useful when the flow-control will be
extended with new fields.
In MQTTv3.1, protocol name is "MQIsdp" and protocol level is 3. The mqtt
converters(mqtt_is_valid and mqtt_field_value) did not work for clients on
mqttv3.1 because the mqtt_parse_connect() marked the CONNECT message invalid
if either the protocol name is not "MQTT" or the protocol version is other than
v3.1.1 or v5.0. To fix it, we have added the mqttv3.1 protocol name and version
as part of the checks.
This patch fixes the mqtt converters to support mqttv3.1 clients as well (issue #1600).
It must be backported to 2.4.
During the packet number space discarding, do no reset tx.in_flight counter
before decrement it from other variables.
Furthermore path prep_in_flight counter was not decremented.
We must consider the peer address as validated as soon as we received an
handshake packet. An ACK frame in handshake packet was too restrictive.
Rename the concerned flag to reflect this situation.
The most important one is the ->flags member which leads to an erratic xprt behavior.
For instance a non ack-eliciting packet could be seen as ack-eliciting leading the
xprt to try to retransmit a packet which are not ack-eliciting. In this case, the
xprt does nothing and remains indefinitively in a blocking state.
The TX packet refcounting had come with the multithreading support but not only.
It is very useful to ease the management of the memory allocated for TX packets
with TX frames attached to. At some locations of the code we have to move TX
frames from a packet to a new one during retranmission when the packet has been
deemed as lost or not. When deemed lost the memory allocated for the paquet must
be released contrary to when its frames are retransmitted when probing (PTO).
For now on, thanks to this patch we handle the TX packets memory this way. We
increment the packet refcount when:
- we insert it in its packet number space tree,
- we attache an ack-eliciting frame to it.
And reciprocally we decrement this refcount when:
- we remove an ack-eliciting frame from the packet,
- we delete the packet from its packet number space tree.
Note that an optimization WOULD NOT be to fully reuse (without releasing its
memorya TX packet to retransmit its contents (its ack-eliciting frames). Its
information (timestamp, in flight length) to be processed by packet loss detection
and the congestion control.
When building a packet with an ACK frame, we store the largest acknowledged
packet number sent in this frame in the packet (quic_tx_packet struc).
When receiving an ack for such a packet we can purge the tree of acknowledged
packet number ranges from the range sent before this largest acknowledged
packet number.
This struct member stores the largest acked packet number which was received. It
is used to build (TX) packet. But this is confusing to store it in the tx packet
of the packet number space structure even if it is used to build and transmit
packets.
There was free_act_rules() that frees all rules from a head but nothing
to free a single rule. Currently some rulesets partially free their own
rules on parsing error, and we're seeing some regtests emit errors under
ASAN because of this.
Let's first extract the code to free a rule into its own function so
that it becomes possible to use it on a single rule.
Log servers are a real mess because:
- entries are duplicated using memcpy() without their strings being
reallocated, which results in these ones not being freeable every
time.
- a new field, ring_name, was added in 2.2 by commit 99c453df9
("MEDIUM: ring: new section ring to declare custom ring buffers.")
but it's never initialized during copies, causing the same issue
- no attempt is made at freeing all that.
Of course, running "haproxy -c" under ASAN quickly notices that and
dumps a core.
This patch adds the missing strdup() and initialization where required,
adds a new free_logsrv() function to cleanly free() such a structure,
calls it from the proxy when iterating over logsrvs instead of silently
leaking their file names and ring names, and adds the same logsrv loop
to the proxy_free_defaults() function so that we don't leak defaults
sections on exit.
It looks a bit entangled, but it comes as a whole because all this stuff
is inter-dependent and was missing.
It's probably preferable not to backport this in the foreseable future
as it may reveal other jokes if some obscure parts continue to memcpy()
the logsrv struct.
The BUG_ON_HOT() test condition added to b_peek_varint() by commit
8873b85bd ("DEBUG: buf: add BUG_ON_HOT() to most buffer management
functions") was wrong as <data> in this function is not b->data,
so that was triggering during live dumps of H2 traces on the CLI
when built with -DDEBUG_STRICT=2. No backport is needed.
The current implementation of STREAM frames emission has some
limitation. Most notably when we cannot sent all frames in a single
qc_send run.
In this case, frames are left in front of the MUX list. It will be
re-send individually before other frames, possibly another frame from
the same STREAM with new data. An opportunity to merge the frames is
lost here.
This method is now improved. If a frame cannot be send entirely, it is
discarded. On the next qc_send run, we retry to send to this position. A
new field qcs.sent_offset is used to remember this. A new frame list is
used for each qc_send.
The impact of this change is not precisely known. The most notable point
is that it is a more logical method of emission. It might also improve
performance as we do not keep old STREAM frames which might delay other
streams.
Implement a new MUX function qcc_notify_send. This function must be
called by the transport layer to confirm the sending of STREAM data to
the MUX.
For the moment, the function has no real purpose. However, it will be
useful to solve limitations on push frame and implement the flow
control.
The aim of the idle timeout is to silently closed the connection after a period
of inactivity depending on the "max_idle_timeout" transport parameters advertised
by the endpoints. We add a new task to implement this timer. Its expiry is
updated each time we received an ack-eliciting packet, and each time we send
an ack-eliciting packet if no other such packet was sent since we received
the last ack-eliciting packet. Such conditions may be implemented thanks
to QUIC_FL_CONN_IDLE_TIMER_RESTARTED_AFTER_READ new flag.
This packet number space flags were defined with the same value because
defined at different places in the file. Assemble them at the same location
with different values.
This bug could unvalidate the peer address after it was validated
during the handshake leading to the anti-amplication limit to be
enabled again after having been disabled. The situation could not
be unblocked (deadlock).
There is no need to use such a reference counter anymore since the QUIC
connections are always handled by the same thread.
quic_conn_drop() is removed. Its code is merged into quic_conn_release().
When we store the remote transport parameters, we compute the maximum idle
timeout for the connection which is the minimum of the two advertised
max_idle_timeout transport parameter values if both have non-null values, or the
maximum if one of the value is set and non-null.
When a tcp-{request,response} content or http-request/http-response
rule delivers a final verdict (deny, accept, redirect etc), the last
evaluated one will now be recorded in the stream. The purpose is to
permit to log the last one that performed a final action. For now
the log is not produced.
The server_id_hdr_name is already processed as an ist in various locations lets
also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The orgto_hdr_name is already processed as an ist in `http_process_request`,
lets also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The fwdfor_hdr_name is already processed as an ist in `http_process_request`,
lets also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The monitor_uri is already processed as an ist in `http_wait_for_request`, lets
also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
Supporting kFreebsd previously led to FreeBSD (< 14) build breakage:
In file included from src/cpuset.c:5:
In file included from include/haproxy/cpuset.h:4:
include/haproxy/cpuset-t.h:46:2: error: unknown type name 'cpu_set_t'; did you mean 'cpuset_t'?
CPUSET_REPR cpuset;
^~~~~~~~~~~
cpuset_t
include/haproxy/cpuset-t.h:21:22: note: expanded from macro 'CPUSET_REPR'
# define CPUSET_REPR cpu_set_t
^
Around limits for QUIC integer encoding, this functions could return
wrong values which lead to qc_build_frms() to prepare wrong CRYPTO (less chances)
or STREAM frames (more chances). qc_do_build_pkt() could build wrong packets
with bad CRYPTO/STREAM frames which could not be decoded by the peer.
In such a case ngtcp2 closes the connection with an ENCRYPTION_ERROR error
in a transport CONNECTION_CLOSE frame.
This function returns the maximum integer which may be encoded with a number of
bytes passed as parameter. Useful to precisely compute the number of bytes which
may used to fulfill a buffer with lengths as QUIC enteger encoded prefixes for the
number of following bytes.
When in congestion avoidance state and when acknowledging an <acked> number bytes
we must increase the congestion window by at most one datagram (<path->mtu>)
by congestion window. So thanks to this patch we apply a ratio to the current
number of acked bytes : <acked> * <path->mtu> / <cwnd>.
So, when <cwnd> bytes are acked we precisely increment <cwnd> by <path->mtu>.
Furthermore we take into an account the number of remaining acknowledged bytes
each time we increment the window by <acked> storing their values in the algorithm
struct state (->remain_acked) so that it might be take into an account at the
next ACK event.
This function returns the remaining number of bytes which can be sent on the
network before fulfilling the congestion window. There is a counter for
the number of prepared data and another one for the really in flight number
of bytes (in_flight). These variable have been mixed up.
Since the persistent congestion detection is done out of the congestion
controllers, there is no need to pass them information through quic_cc_event struct.
We remove its useless members. Also remove qc_cc_loss_event() which is no more used.
We establish the persistent congestion out of any congestion controller
to improve the algorithms genericity. This path characteristic detection may
be implemented regarless of the underlying congestion control algorithm.
Send congestion (loss) event using directly quic_cc_event(), so without
qc_cc_loss_event() wrapper function around quic_cc_event().
Take the opportunity of this patch to shorten "newest_time_sent" member field
of quic_cc_event to "time_sent".
We want to be able to make the congestion controllers re-enter the slow
start state outside of the congestion controllers themselves. So,
we add a callback ->slow_start() to do so.
Define this callback for NewReno algorithm.
kFreeBSD needs to be treated as a distinct target from FreeBSD
since the underlying system libc is the GNU one. Thus, relying
only on __GLIBC__ no longer suffice.
- freebsd-glibc new target, key difference is including crypt.h
and linking to libdl like linux.
- cpu affinity available but the api is still the FreeBSD's.
- enabling auxiliary data access only for Linux.
Patch based on preliminary work done by @bigon.
closes#1555
Implement the locally flow-control streams limit for opened
bidirectional streams. Add a counter which is used to count the total
number of closed streams. If this number is big enough, emit a
MAX_STREAMS frame to increase the limit of remotely opened bidirectional
streams.
This is the first commit to implement QUIC flow-control. A series of
patches should follow to complete this.
This is required to be able to handle more than 100 client requests.
This should help to validate the Multiplexing interop test.
Modify the STREAM emission in qc_send. Use the new transport function
qc_send_app_pkts to directly send the list of constructed frames. This
allows to remove the tasklet wakeup on the quic_conn and should reduce
the latency.
If not all frames are send after the transport call, subscribe the MUX
on the lower layer to be able to retry. Currently there is a bug because
the transport layer does not retry to send frames in excess after a
successful sendto. This might cause the transfer to be interrupted.
Define two new unions in the qcc structure named 'lfctl' and 'rfctl'.
For the moment they are empty. They will be completed to store the
initial and current level for flow-control on the local and remote side.
Improve the functions used to detect the stream characteristics :
uni/bidirectional and local/remote initiated.
Most notably, these functions are now designed to work transparently for
a MUX in the frontend or backend side. For this, we use the connection
to determine the current MUX side. This will be useful if QUIC is
implemented on the server side.
Since QUIC accept handling has been improved, the MUX is initialized
after the handshake completion. Thus its safe to access transport
parameters in qc_init via the quic_conn.
Remove quic_mux_transport_params_update which was called by the
transport for the MUX. This improves the architecture by removing a
direct call from the transport to the MUX.
The deleted function body is not transfered to qc_init because this part
will change heavily in the near future when implementing the
flow-control.
As reported by Tim in issue #1428, our sources are clean, there are
just a few files with a few rare non-ASCII chars for the paragraph
symbol, a few typos, or in Fred's name. Given that Fred already uses
the non-accentuated form at other places like on the public list,
let's uniformize all this and make sure the code displays equally
everywhere.
This is the pool equivalent of commit 97ea9c49f ("BUG/MEDIUM: fd: always
align fdtab[] to 64 bytes"). After a careful code review, it happens that
the pool heads are the other structures allocated with malloc/calloc that
claim to be aligned to a size larger than what the allocator can offer.
While no issue was reported on them, no memset() is performed and no type
is large, this is a problem waiting to happen, so better fix it. In
addition, it's relatively easy to do by storing the allocation address
inside the pool_head itself and use it at free() time. Finally, threads
might benefit from the fact that the caches will really be aligned and
that there will be no false sharing.
This should be backported to all versions where it applies easily.
Many inline functions involve some BUG_ON() calls and because of the
partial complexity of the functions, they're not inlined anymore (e.g.
co_data()). The reason is that the expression instantiates the message,
its size, sometimes a counter, then the atomic OR to taint the process,
and the back trace. That can be a lot for an inline function and most
of it is always the same.
This commit modifies this by delegating the common parts to a dedicated
function "complain()" that takes care of updating the counter if needed,
writing the message and measuring its length, and tainting the process.
This way the caller only has to check a condition, pass a pointer to the
preset message, and the info about the type (bug or warn) for the tainting,
then decide whether to dump or crash. Note that this part could also be
moved to the function but resulted in complain() always being at the top
of the stack, which didn't seem like an improvement.
Thanks to these changes, the BUG_ON() calls do not result in uninlining
functions anymore and the overall code size was reduced by 60 to 120 kB
depending on the build options.
This one is referenced in initcalls by its pointer, it makes no sense
to declare it inline. At best it causes function duplication, at worst
it doesn't build on older compilers.
This one is referenced in initcalls by its pointer, it makes no sense
to declare it inline. At best it causes function duplication, at worst
it doesn't build on older compilers.
The 3 functions http_{req,res,after_res}_keywords_register() are
referenced in initcalls by their pointer, it makes no sense to declare
them inline. At best it causes function duplication, at worst it doesn't
build on older compilers.
This one is referenced in initcalls by its pointer, it makes no sense
to declare it inline. At best it causes function duplication, at worst
it doesn't build on older compilers.
gcc 6 continues its saga with excessive reports of null-deref warnings.
This time it was in the IS_HTX_CS() macro. Let's use __cs_conn() after
cs_conn() was checked.
Do not distinguish the direction (TX/RX) when settings TLS secrets flags.
There is not such a distinction in the RFC 9001.
Assemble them at the same level: at the upper context level.
Wakeup asap the timer task when setting its timer in the past.
Take also the opportunity of this patch to make simplify quic_pto_pktns():
calling tick_first() is useless here to compare <lpto> with <tmp_pto>.
We had several warnings when building haproxy 2.5.4 with
old openssl 1.0.1e. This version of openssl is the latest
available in EOL centos 6.
include/haproxy/openssl-compat.h:157:51: \
warning: "LIBRESSL_VERSION_NUMBER" is not defined
This patch fixed the build. It changes the #if condition,
as done in other similar parts of openssl-compat.h.
Reorganize the Rx path for STREAM frames on bidirectional streams. A new
function qcc_recv is implemented on the MUX. It will handle the STREAM
frames copy and offset calculation from transport to MUX.
Another function named qcc_decode_qcs from the MUX can be called by
transport each time new STREAM data has been copied.
The architecture is now cleaner with the MUX layer in charge of parsing
the STREAM frames offsets. This is required to be able to implement the
flow-control on the MUX layer.
Note that as a convenience, a STREAM frame is not partially copied to
the MUX buffer. This simplify the implementation for the moment but it
may change in the future to optimize the STREAM frames handling.
For the moment, only bidirectional streams benefit from this change. In
the future, it may be extended to unidirectional streams to unify the
STREAM frames processing.
FIN flag on a STREAM frame was not detected if the frame was previously
buffered on qcs.rx.frms before being handled.
To fix this, copy the fin field from the quic_stream instance to
quic_rx_strm_frm. This is required to properly notify the FIN flag on
qc_treat_rx_strm_frms for the MUX layer.
Without this fix, the request channel might be left opened after the
last STREAM frame reception if there is out-of-order frames on the Rx
path.
This flag is set when the STREAM frame with FIN set has been received on
a qcs instance. For now, this is only used as a BUG_ON guard to prevent
against multiple frames with FIN set. It will also be useful when
reorganize the RX path and move some of its code in the mux.
The new macro was introduced with commit 86bcc5308 ("DEBUG: implement 4
levels of choices between warn and crash.") but some older compilers can
complain that we test the value when the macro is not defined despite
having already been checked in a previous #if directive. Let's just
repeat the test for the definition.
693b23bb1 ("MEDIUM: tree-wide: Use unsafe conn-stream API when it is
relevant") introduced a regression in DEBUG_STRICT mode because some BUG_ON
conditions were inverted. It should ok now.
In addition, ALREADY_CHECKED macro was removed from appctx_wakeup() function
because it is useless now.
This way si_*_recv() and si_*_sned() API are defined the same
way. si_sync_snd/si_sync_recv are both exported and defined in the C
file. And si_cs_send/si_cs_recv are private and only used by
stream-interface internals.
The unsafe conn-stream API (__cs_*) is now used when we are sure the good
endpoint or application is attached to the conn-stream. This avoids compiler
warnings about possible null derefs. It also simplify the code and clear up
any ambiguity about manipulated entities.
Depending on the context, we know the endpoint or the application attached
to the conn_stream is defined and we know its type. However, having
accessors testing the endpoint or the application may lead the compiler to
report possible null derefs here and there. The alternative is to add
useless tests or use ALREAD_CHECKED/DISGUISE macros. It is tedious and
inelegant.
So now, similarily to the ob API, the safe API, testing
endpoint/application, relies on an unsafe one (same name prefixed with
'__'). This way, any caller may use the unsafe API when it is relevant.
In addition, there is no reason to test the conn-stream itself. It is the
caller responsibility to be sure there is a conn-stream to get its endpoint
or its application. And most of type, we are sure to have a conn-stream.
A few functions such as c_adv(), c_rew(), co_set_data() or co_skip() got a
BUG_ON_HOT() to make sure they're not used to push more data than available
in the buffer. Note that with HTX the margin can be high and will less easily
trigger, but the goal is to detect a misuse early enough.
co_data() should never be called with a wrong c->output. At least it never
happens in regtests, but we're adding a CHECK_IF_HOT() there to avoid crashing
but report it if it ever happened when the hot path checks are enabled.
The use of co_set_data() should be strictly limited to setting the amount
of existing data to be transmitted. It ought not be used to decrement the
output after the data have left the buffer, because doing so involves
performing incorrect calculations using co_data() that still comprises
data that are not in the buffer anymore. Let's use c_rew() for this, which
is made exactly for this purpose, i.e. decrement c->output by as much as
requested. This is cleaner, faster, and will permit stricter checks.
A number of tests are now performed in low-level buffer management
functions to verify that we're not appending data to a full buffer
for example, or that the buffer passed in argument is consistent in
that its data don't outweigh its size. The few functions that already
involve memcpy() or memmove() instead got a BUG_ON() that will always
be enabled, since the overhead remains minimalist.
The buffer ring management functions br_* were all stuffed with BUG_ON()
statements that never triggered and that are on some fast paths (e.g. in
mux_h2). Let's turn them to BUG_ON_HOT() instead.
Two new BUG_ON variants, BUG_ON_HOT() and CHECK_IF_HOT() are introduced
to debug hot paths (such as low-level API functions). These ones must
not be enabled by default as they would significantly affect performance
but they may be enabled by setting DEBUG_STRICT to a value above 1. In
this case, DEBUG_STRICT_ACTION is mostly respected with a small change,
which is that the no_crash variant of BUG_ON() isn't turned to a regular
warning but to a one-time warning so as not to spam with warnings in a
hot path. It is for this reason that there is no WARN_ON_HOT().
We used to have DEBUG_STRICT_NOCRASH to disable crashes on BUG_ON().
Now we have other levels (WARN_ON(), CHECK_IF()) so we need something
finer-grained.
This patch introduces DEBUG_STRICT_ACTION which takes an integer value.
0 disables crashes and is the equivalent of DEBUG_STRICT_NOCRASH. 1 is
the default and only enables crashes on BUG_ON(). 2 also enables crashes
on WARN_ON(), and 3 also enables warnings on CHECK_IF(), and is suited
to developers and CI.
Now we'll explicitly mention if the test was a bug/warn/check, and
"FATAL" is only displayed when the process crashes. The non-crashing
BUG_ON() also suggests to report to developers.
The only reason for warning once is to check if a condition really
happens. Let's use a term that better translates the intent, that's
important when reading the code.
Simplify the data manipulation of STREAM frames on TX. Only stream data
and len field are used to generate a valid STREAM frames from the
buffer. Do not use the offset field, which required that a single buffer
instance should be shared for every frames on a single stream.
This one will maintain a static counter per call place and will only
emit the warning on the first call. It may be used to invite users to
report an unexpected event without spamming them with messages.
This is the same as BUG_ON() except that it never crashes and only emits
a warning and a backtrace, inviting users to report the problem. This will
be usable for non-fatal issues that should not happen and need to be fixed.
This way the BUG_ON() when using DEBUG_STRICT_NOCRASH is effectively an
equivalent of WARN_ON().
The purpose is to make the program die at this point, so let's help the
compiler optimise the code (especially in sensitive areas) by telling it
that ABORT_NOW() does not return. This reduces the overall code size by
~0.5%.
The BUG_ON() macro handling is complicated because it relies on a
conditional CRASH_NOW() macro whose definition depends on DEBUG_STRICT
and DEBUG_STRICT_NOCRASH. Let's rethink the whole thing differently,
and instead make the underlying _BUG_ON() macro take a crash argument
to decide whether to crash or not, as well as a prefix and a suffix for
the message, that will allow to distinguish between variants. Now the
suffix is set to a message explaining we don't crash when needed.
This also allows to get rid of the CRASH_NOW() macro and to define
much simpler new macros.
The functions needed to manipulate the "tainted" flags were located in
too high a level to be callable from the lower code layers. Let's move
them to bug.h.
Since recent changes related to the conn-stream/stream-interface
refactoring, GCC reports potential null pointer dereferences when we get the
appctx, the stream or the stream-interface from the conn-strem. Of course,
depending on the time, these entities may be null. But at many places, we
know they are defined and it is safe to get them without any check. Thus, we
use ALREADY_CHECKED() macro to silent these warnings.
Note that the refactoring is unfinished, so it is not a real issue for now.
cs_detach_app() function is added to detach an app from a conn-stream. And
now, both cs_detach_app() and cs_detach_endp() release the conn-stream when
both the app and the endpoint are detached.
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
Because cs_detach() is releated to the endpoint only, the function is
renamed. The main purpose of this patch is to be able to add a function to
detach the conn-stream from the application.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the stream part.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the stream-interface part.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
In the same way the conn-stream has a pointer to the stream endpoint , this
patch adds a pointer to the application entity in the conn-stream
structure. For now, it is a stream or a health-check. It is mandatory to
merge the stream-interface with the conn-stream.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
To be able to handle applets as a conn-stream endpoint, we must be prepared
to handle different types of endpoints. First of all, the conn-strream's
connection must no longer be used directly.
The backend conn-stream is no longer released on connection retry. This
means the conn-stream is detached from the underlying connection but not
released. Thus, during connection retries, the stream has always an
allocated conn-stream with no connection. All previous changes were made to
make this possible.
Note that .attach() mux callback function was changed to get the conn-stream
as argument. The muxes are no longer responsible to create the conn-stream
when a server connection is attached to a stream.
si_attach_conn() function should be used to attach a connection to a
stream-interface. It created a conn-stream if necessary. This function is
mandatory to be able to keep the backend conn-stream during connection
retries.
si_reset_endpoint() function may be used to reset the SI's endpoint without
releasing the conn-stream if the endpoint is a connection. If the endpoint
is an appctx, it is released. This change is mandatory to merge the SI and
the CS and keep the backend conn-stream attached to the stream during
connection retries.
cs_detach() function is added to detach a conn-stream from the underlying
connection. This part will evovle to handle applets too. Concretely,
cs_destroy() is split to detach the conn-stream from its endpoint, via
cs_detach(), and then, the conn-stream is released, via cs_free().
The conn-stream will progressively replace the stream-interface. Thus, a
stream will have to allocate the backend conn-stream during its
creation. This means it will be possible to have a conn-stream with no
connection. To prepare this change, we test the conn-stream's connection
when we retrieve it.
Stream-interfaces will be moved in the conn-stream and the appctx will be
moved at the same level than the muxes. Idea is to merge the
stream-interface and the conn-stream and have a better symmetry between the
muxes and the applets. To limit bugs during this refactoring, when the SI
endpoint is released, the appctx case is handled first.
New function pool_parse_debugging() is now dedicated to parsing options
of -dM. For now it only handles the optional memory poisonning byte, but
the function may already return an informative message to be printed for
help, a warning or an error. This way we'll reuse it for the settings
that will be needed for configurable debugging options.
The STG_REGISTER init level is used to register known keywords and
protocol stacks. It must be called earlier because some of the init
code already relies on it to be known. For example, "haproxy -vv"
for now is constrained to start very late only because of this.
This patch moves it between STG_LOCK and STG_ALLOC, which is fine as
it's used for static registration.
Now -dM will set POOL_DBG_POISON for consistency with the rest of the
pool debugging options. As such now we only check for the new flag,
which allows the default value to be preset.
This option used to allow to store a marker at the end of the area, which
was used as a canary and detection against wrong freeing while the object
is used, and as a pointer to the last pool_free() caller when back in cache.
Now that we can compute the offsets at runtime, let's check it at run time
and continue the code simplification.
This option used to allow to store a pointer to the caller of the last
pool_alloc() or pool_free() at the end of the area. Now that we can
compute the offsets at runtime, let's check it at run time and continue
the code simplification. In __pool_alloc() we now always calculate the
return address (which is quite cheap), and the POOL_DEBUG_TRACE_CALLER()
calls are conditionned on the status of debugging option.
This macro is build-time dependent and is almost unused, yet where it
cannot easily be avoided. Now that we store the distinction between
pool->size and pool->alloc_sz, we don't need to maintain it and we
can instead compute it on the fly when creating a pool. This is what
this patch does. The variables are for now pretty static, but this is
sufficient to kill the macro and will allow to set them more dynamically.
The allocated size is the visible size plus the extra storage. Since
for now we can store up to two extra elements (mark and tracer), it's
convenient because now we know that the mark is always stored at
->size, and the tracer is always before ->alloc_sz.
Like previous patches, this replaces the build-time code paths that were
conditionned by CONFIG_HAP_POOLS with runtime paths conditionned by
!POOL_DBG_NO_CACHE. One trivial test had to be added in the hot path in
__pool_alloc() to refrain from calling pool_get_from_cache(), and another
one in __pool_free() to avoid calling pool_put_to_cache().
All cache-specific functions were instrumented with a BUG_ON() to make
sure we never call them with cache disabled. Additionally the cache[]
array was not initialized (remains NULL) so that we can later drop it
if not needed. It's particularly huge and should be turned to dynamic
with a pointer to a per-thread area where all the objects are located.
This will solve the memory usage issue and will improve locality, or
even help better deal with NUMA machines once each thread uses its own
arena.
There were very few functions left that were specific to global pools,
and even the checks they used to participate to are not directly on the
most critical path so they can suffer an extra "if".
What's done now is that pool_releasable() always returns 0 when global
pools are disabled (like the one before) so that pool_evict_last_items()
never tries to place evicted objects there. As such there will never be
any object in the free list. However pool_refill_local_from_shared() is
bypassed when global pools are disabled so that we even avoid the atomic
loads from this function.
The default global setting is still adjusted based on the original
CONFIG_NO_GLOBAL_POOLS that is set depending on threads and the allocator.
The global executable only grew by 1.1kB by keeping this code enabled,
and the code is simplified and will later support runtime options.
The test to decide whether or not to enforce integrity checks on cached
objects is now enabled at runtime and conditionned by this new debugging
flag. While previously it was not a concern to inflate the code size by
keeping the two functions static, they were moved to pool.c to limit the
impact. In pool_get_from_cache(), the fast code path remains fast by
having both flags tested at once to open a slower branch when either
POOL_DBG_COLD_FIRST or POOL_DBG_INTEGRITY are set.
When enabling pools integrity checks, we usually prefer to allocate cold
objects first in order to maximize the time the objects spend in the
cache. In order to make this configurable at runtime, let's introduce
a new debugging flag to control this allocation order. It is currently
preset by the DEBUG_POOL_INTEGRITY build-time setting.
This test used to appear at a single location in create_pool() to
enable a check on the pool name or unconditionally merge similarly
sized pools.
This patch introduces POOL_DBG_DONT_MERGE and conditions the test on
this new runtime flag, that is preset according to the aforementioned
debugging option.
The fail-alloc test used to be enabled/disabled at build time using
the DEBUG_FAIL_ALLOC macro, but it happens that the cost of the test
is quite cheap and that it can be enabled as one of the pool_debugging
options.
This patch thus introduces the first POOL_DBG_FAIL_ALLOC option, whose
default value depends on DEBUG_FAIL_ALLOC. The mem_should_fail() function
is now always built, but it was made static since it's never used outside.
This read-mostly variable will be used at runtime to enable/disable
certain pool-debugging features and will be set by the command-line
parser. A future option -dP will take a number of debugging features
as arguments to configure this variable's contents.
Add the ability to set a "server timeout" on the httpclient with either
the httpclient_set_timeout() API or the timeout argument in a request.
Issue #1470.
This function was renderred obsolete by commit a0b5831ee ("MEDIUM: pools:
centralize cache eviction in a common function") which replaced its last
call inside the loop with a single call out of the loop to pool_releasable()
as introduced by commit 91a8e28f9 ("MINOR: pool: add a function to estimate
how many may be released at once"). Let's remove it before it becomes wrong
and used again.
In htx_copy_msg(), if the destination buffer is empty, we perform a raw copy
of the message instead of a copy block per block. But we must be sure the
destianation buffer was really allocated. In other word, to perform a raw
copy, the HTX message must be empty _AND_ it must have some free space
available.
This function is only used to copy an HTTP reply (for instance, an error or
a redirect) in the buffer of the response channel. For now, we are sure the
buffer was allocated because it is a pre-requisite to call stream
analyzers. However, it may be a source of bug in future.
This patch may be backported as far as 2.3.
Implement the stream rcv_buf operation on QUIC mux.
A new buffer is stored in qcs structure named app_buf. This new buffer
will contains HTX and will be filled for example on H3 DATA frame
parsing.
The rcv_buf operation transfer as much as possible data from the HTX
from app_buf to the conn-stream buffer. This is mainly identical to
mux-h2. This is required to support HTTP POST data.
Move the QUIC datagram handlers oustide of the receivers. Use a global
handler per-thread which is allocated on post-config. Implement a free
function on process deinit to avoid a memory leak.
Since the relaxation of the run-queue locks in 2.0 there has been a
very small but existing race between expired tasks and running tasks:
a task might be expiring and being woken up at the same time, on
different threads. This is protected against via the TASK_QUEUED and
TASK_RUNNING flags, but just after the task finishes executing, it
releases it TASK_RUNNING bit an only then it may go to task_queue().
This one will do nothing if the task's ->expire field is zero, but
if the field turns to zero between this test and the call to
__task_queue() then three things may happen:
- the task may remain in the WQ until the 24 next days if it's in
the future;
- the task may prevent any other task after it from expiring during
the 24 next days once it's queued
- if DEBUG_STRICT is set on 2.4 and above, an abort may happen
- since 2.2, if the task got killed in between, then we may
even requeue a freed task, causing random behaviour next time
it's found there, or possibly corrupting the tree if it gets
reinserted later.
The peers code is one call path that easily reproduces the case with
the ->expire field being reset, because it starts by setting it to
TICK_ETERNITY as the first thing when entering the task handler. But
other code parts also use multi-threaded tasks and rightfully expect
to be able to touch their expire field without causing trouble. No
trivial code path was found that would destroy such a shared task at
runtime, which already limits the risks.
This must be backported to 2.0.
Along recent evolutions of the pools, we've lost the ability to reliably
detect double-frees because while in the past the same pointer was being
used to chain the objects in the cache and to store the pool's address,
since 2.0 they're different so the pool's address is never overwritten on
free() and a double-free will rarely be detected.
This patch sets the caller's return address there. It can never be equal
to a pool's address and will help guess what was the previous call path.
It will not work on exotic architectures nor with very old compilers but
these are not the environments where we're trying to get detailed bug
reports, and this is not done by default anyway so we don't care about
this limitation. Note that depending on the inlining status of the
function, the result may differ but that's no big deal either.
A test by placing a double free of an appctx inside the release handler
itself successfully reported the trouble during appctx_free() and showed
that the return address was in stream_int_shutw_applet() (this one calls
the release handler).
During global eviction we're visiting nodes from the LRU tail and we
determine their pool cache head and their pool. In order to make sure
we never mess up, let's add some backwards pointer to the thread number
and pool from the pool_cache_head. It's 64-byte aligned anyway so we're
not wasting space and it helps for debugging and will prevent memory
corruption the earliest possible.
When destroying a pool (e.g. at exit or when resizing buffers), it's
important to try to free all their local objects otherwise we can leave
some in the cache. This is particularly visible when changing "bufsize",
because "show pools" will then show two "trash" pools, one of which
contains a single object in cache (which is fortunately not reachable).
In all cases this happens while single-threaded so that's easy to do,
we just have to do it on the current thread.
The easiest way to do this is to pass an extra argument to function
pool_evict_from_local_cache() to force a full flush instead of a
partial one.
This can probably be backported to about all branches where this
applies, but at least 2.4 needs it.
DH structure is a low-level one that should not be used anymore with
OpenSSLv3. All functions working on DH were marked as deprecated and
this patch replaces the ones we used with new APIs recommended in
OpenSSLv3, be it in the migration guide or the multiple new manpages
they created.
This patch replaces all mentions of the DH type by the HASSL_DH one,
which will be replaced by EVP_PKEY with OpenSSLv3 and will remain DH on
older versions. It also uses all the newly created helper functions that
enable for instance to load DH parameters from a file into an EVP_PKEY,
or to set DH parameters into an SSL_CTX for use in a DHE negotiation.
The following deprecated functions will effectively disappear when
building with OpenSSLv3 : DH_set0_pqg, PEM_read_bio_DHparams, DH_new,
DH_free, DH_up_ref, SSL_CTX_set_tmp_dh.
Starting from OpenSSLv3, we won't rely on the
SSL_CTX_set_tmp_dh_callback mechanism so we will need to know the DH
size we want to use during init. In order for the default DH param size
to be used when no RSA or DSA private key can be found for a given bind
line, we will need to know the default size we want to use (which was
not possible the way the code was built, since the global default dh
size was set too late.
This new function makes use of the new OpenSSLv3 APIs that should be
used to load DH parameters from a file (or a BIO in this case) and that
should replace the deprecated PEM_read_bio_DHparams function.
Note that this function returns an EVP_PKEY when using OpenSSLv3 since
they now advise against using low level structures such as DH ones.
This helper function is not used yet so this commit should be stricly
iso-functional, regardless of the OpenSSL version.
The DH mechanism relies on DH objects that are low-level structures that
should not be used anymore starting from OpenSSLv3. With the newer
OpenSSL version, we should only use higher level EVP_PKEY objects.
Since enforcing this new logic to older versions of OpenSSL could be
dangerous (or plain impossible), we will keeptwo versions of the code
when required.
The HASSL_DH define will allow to unify some of the functions that were
created for DH use without having to add too many duplicated blocks of
code depending on the OpenSSL version.
ERR_func_error_string does not return anything anymore with OpenSSLv3,
it can be replaced by ERR_peek_error_func which did not exist on
previous versions.
Rename quic_conn_to_buf to qc_snd_buf and remove it from xprt ops. This
is done to reflect the true usage of this function which is only a
wrapper around sendto but cannot be called by the upper layer.
qc_snd_buf is moved in quic-sock because to mark its link with
quic_sock_fd_iocb which is the recvfrom counterpart.
SSL_CTX_set_tlsext_ticket_key_cb was deprecated on OpenSSLv3 because it
uses an HMAC_pointer which is deprecated as well. According to the v3's
manpage it should be replaced by SSL_CTX_set_tlsext_ticket_key_evp_cb
which uses a EVP_MAC_CTX pointer.
This new callback was introduced in OpenSSLv3 so we need to keep the two
calls in the source base and to split the usage depending on the OpenSSL
version.
"mcli-debug-mode on" enables every command that were meant for a worker,
on the CLI of the master. Which mean you can issue, "show fd", show
stat" in order to debug the MASTER proxy.
You can also combine it with "expert-mode on" or "experimental-mode on"
to access to more commands.
Allow to set the master CLI in expert or experimental mode. No command
within the master are unlocked yet, but it gives the ability to send
expert or experimental commands to the workers.
echo "@1; experimental-mode on; del server be1/s2" | socat /var/run/haproxy.master -
echo "experimental-mode on; @1 del server be1/s2" | socat /var/run/haproxy.master -
We'll need to lock the listener a little bit more during accept() and
tests show that a spinlock is a massive performance killer, so let's
first switch to an rwlock for this lock.
This patch might have to be backported for the next patch to work, and
if so, the change is almost mechanical (look for LISTENER_LOCK), but do
not forget about the few HA_SPIN_INIT() in the file. There's no reference
to this lock outside of listener.c nor listener-t.h.
This task will be used to schedule a timer when there is no activity on
the mux. The timeout is set via the "timeout client" from the
configuration file.
The timeout task process schedule the timeout only on specific
conditions. Currently, it's done if there is no opened bidirectional
stream.
For now this task is not used. This will be implemented in the following
commit.
It's among the cases that would provoke memory corruption, let's add
some tests against negative FDs and those larger than the table. This
must never ever happen and would currently result in silent corruption
or a crash. Better have a noticeable one exhibiting the call chain if
that were to happen.
We add a new flag to mark a connection as already enqueued for acception.
This is useful for 0-RTT session where a connection is first enqueued for
acception as soon as 0-RTT RX secrets could be derived. Then as for any other
connection, we could accept one more time this connection after handshake
completion which lead to very bad side effects.
Thank you to Amaury for this nice patch.
When starting HAProxy in master-worker, the master pre-allocate a struct
mworker_proc and do a socketpair() before the configuration parsing. If
the configuration loading failed, the FD are never closed because they
aren't part of listener, they are not even in the fdtab.
This patch fixes the issue by cleaning the mworker_proc structure that
were not asssigned a process, and closing its FDs.
Must be backported as far as 2.0, the srv_drop() only frees the memory
and could be dropped since it's done before an exec().
There were a few casts of list* to mt_list* that were upsetting some
old compilers (not sure about the effect on others). We had created
list_to_mt_list() purposely for this, let's use it instead of applying
this cast.
At a few places in the code the switch/case ond flags are tested against
64-bit constants without explicitly being marked as long long. Some
32-bit compilers complain that the constant is too large for a long, and
other likely always use long long there. Better fix that as it's uncertain
what others which do not complain do. It may be backported to avoid doubts
on uncommon platforms if needed, as it touches very few areas.
These functions are declared as external functions in check.h and
as inline functions in check.c. Let's move them as static inline in
check.h. This appeared in 2.4 with the following commits:
4858fb2e1 ("MEDIUM: check: align agentaddr and agentport behaviour")
1c921cd74 ("BUG/MINOR: check: consitent way to set agentaddr")
While harmless (it only triggers build warnings with some gcc 4.x),
it should probably be backported where the paches above are present
to keep the code consistent.
The man page indicates that CPU_AND() and CPU_ASSIGN() take a variable,
not a const on the source, even though it doesn't make much sense. But
with older libcs, this triggers a build warning:
src/cpuset.c: In function 'ha_cpuset_and':
src/cpuset.c:53: warning: initialization discards qualifiers from pointer target type
src/cpuset.c: In function 'ha_cpuset_assign':
src/cpuset.c:101: warning: initialization discards qualifiers from pointer target type
Better stick stricter to the documented API as this is really harmless
here. There's no need to backport it (unless build issues are reported,
which is quite unlikely).
We have an implementation of atomic ops for older versions of gcc that
do not provide the __builtin_* API (< 4.4). Recent changes to the pools
broke that in pool_releasable() by having a load from a const pointer,
which doesn't work there due to a temporary local variable that is
declared then assigned. Let's make use of a compount statement to assign
it a value when declaring it.
There's no need to backport this.
The startup code used to scan the list of unused sockets retrieved from
an older process, and to close them one by one. This also required that
the knowledge of the internal storage of these temporary sockets was
known from outside sock.c and that the code was copy-pasted at every
call place.
This patch moves this into sock.c under the name
sock_drop_unused_old_sockets(), and removes the xfer_sock_list
definition from sock.h since the rest of the code doesn't need to know
this.
This cleanup is minimal and preliminary to a future fix that will need
to be backported to all versions featuring FD transfers over the CLI.
Do not use an extra DCID parameter on new_quic_cid to be able to
associated a new generated CID to a thread ID. Simply do the computation
inside the function. The API is cleaner this way.
This also has the effects to improve the apparent randomness of CIDs.
With the previous version the first byte of all CIDs are identical for a
connection which could lead to privacy issue. This version may not be
totally perfect on this aspect but it improves the situation.
The CID trees are no more attached to the listener receiver but to the
underlying datagram handlers (one by thread) which run always on the same thread.
So, any operation on these trees do not require any locking.
We copy the first octet of the original destination connection ID to any CID for
the connection calling new_quic_cid(). So this patch modifies only this function
to take a dcid as passed parameter.
Rename quic_lstnr_dgram_read() to quic_lstnr_dgram_dispatch() to reflect its new role.
After calling this latter, the sock i/o handler must consume the buffer only if
the datagram it received is detected as wrong by quic_lstnr_dgram_dispatch().
The datagram handler task mark the datagram as consumed atomically setting ->buf
to NULL value. The sock i/o handler is responsible of flushing its RX buffer
before using it. It also keeps a datagram among the consumed ones so that
to pass it to quic_lstnr_dgram_dispatch() and prevent it from allocating a new one.
As mentionned in the comment, the tx_qrings and rxbufs members of
receiver struct must be pointers to pointers!
Modify the functions responsible of their allocations consequently.
Note that this code could work because sizeof rxbuf and sizeof tx_qrings
are greater than the size of pointer!
The quic_dgram_ctx struct has been replaced by quic_dgram struct.
There is no need to keek a typedef for a pointer to function since we
converted the UDP datagram parser (quic_dgram_read()) into a task.
quic_dgram_read() parses all the QUIC packets from a UDP datagram. It is the best
candidate to be converted into a task, because is processing data unit is the UDP
datagram received by the QUIC sock i/o handler. If correct, this datagram is
added to the context of a task, quic_lstnr_dghdlr(), a conversion of quic_dgram_read()
into a task. This task pop a datagram from an mt_list and passes it among to
the packet handler (quic_lstnr_pkt_rcv()).
Modify the quic_dgram struct to play the role of the old quic_dgram_ctx struct when
passed to quic_lstnr_pkt_rcv().
Modify the datagram handlers allocation to set their tasks to quic_lstnr_dghdlr().
Add quic_dghdlr new struct do define datagram handler tasks, one by thread.
Allocate them and attach them to the listener receiver part calling
quic_alloc_dghdlrs_listener() newly implemented function.
Add quic_dgram new structure to store information about datagrams received
by the sock I/O handler (quic_sock_fd_iocb) and its associated pool.
Implement quic_get_dgram_dcid() to retrieve the datagram DCID which must
be the same for all the packets in the datagram.
Modify quic_lstnr_dgram_read() called by the sock I/O handler to allocate
a quic_dgram each time a correct datagram is found and add it to the sock I/O
handler rxbuf dgram list.
Define the offsets of the DCIDs from the beginning of a QUIC packets.
Note that they must always be present. As QUIC servers, QUIC haproxy listeners
always use a CID, source CID on the haproxy side, which is a destination ID on the
peer side.
This is to be sure xprt functions do not manipulate the buffer struct
passed as parameter to quic_lstnr_dgram_read() from low level datagram
I/O callback in quic_sock.c (quic_sock_fd_iocb()).
In github bug #1517, Mike Lothian reported instant crashes on startup
on RHEL8 + gcc-11 that appeared with 2.4 when allocating a proxy.
The analysis brought us down to the THREAD_ALIGN() entries that were
placed inside the "server" struct to avoid false sharing of cache lines.
It turns out that some modern gcc make use of aligned vector operations
to manipulate some fields (e.g. memset() etc) and that these structures
allocated using malloc() are not necessarily aligned, hence the crash.
The compiler is allowed to do that because the structure claims to be
aligned. The problem is in fact that the alignment propagates to other
structures that embed it. While most of these structures are used as
statically allocated variables, some are dynamic and cannot use that.
A deeper analysis showed that struct server does this, propagates to
struct proxy, which propagates to struct spoe_config, all of which
are allocated using malloc/calloc.
A better approach would consist in usins posix_memalign(), but this one
is not available everywhere and will either need to be reimplemented
less efficiently (by always wasting 64 bytes before the area), or a
few functions will have to be specifically written to deal with the
few structures that are dynamically allocated.
But the deeper problem that remains is that it is difficult to track
structure alignment, as there's no available warning to check this.
For the long term we'll probably have to create a macro such as
"struct_malloc()" etc which takes a type and enforces an alignment
based on the one of this type. This also means propagating that to
pools as well, and it's not a tiny task.
For now, let's get rid of the forced alignment in struct server, and
replace it with extra padding. By punching 63-byte holes, we can keep
areas on separate cache lines. Doing so moderately increases the size
of the "server" structure (~+6%) but that's the best short-term option
and it's easily backportable.
This will have to be backported as far as 2.4.
Thanks to Mike for the detailed report.
Do not proceed to direct accept when creating a new quic_conn. Wait for
the QUIC handshake to succeeds to insert the quic_conn in the accept
queue. A tasklet is then woken up to call listener_accept to accept the
quic_conn.
The most important effect is that the connection/mux layers are not
instantiated at the same time as the quic_conn. This forces to delay
some process to be sure that the mux is allocated :
* initialization of mux transport parameters
* installation of the app-ops
Also, the mux instance is not checked now to wake up the quic_conn
tasklet. This is safe because the xprt-quic code is now ready to handle
the absence of the connection/mux layers.
Note that this commit has a deep impact as it changes significantly the
lower QUIC architecture. Most notably, it breaks the 0-RTT feature.
Create a new structure li_per_thread. This is uses as an array in the
listener structure, with an entry allocated per thread. The new function
li_init_per_thr is responsible of the allocation.
For now, li_per_thread contains fields only useful for QUIC listeners.
As such, it is only allocated for QUIC listeners.
Create a new type quic_accept_queue to handle QUIC connections accept.
A queue will be allocated for each thread. It contains a list of
listeners which contains at least one quic_conn ready to be accepted and
the tasklet to run listener_accept for these listeners.
Mark QUIC listeners with the flag LI_F_QUIC_LISTENER. It is set by the
proto-quic layer on the add listener callback. This allows to override
more clearly the accept callback on quic_session_accept.
Define a new field in listener structure named flags.
For the moment, no flag is defined. This will be notably useful to
differentiate QUIC listeners with the implementation of a QUIC conn
accept queue.
Remove usage of connection in quic_conn_from_buf. As connection and
quic_conn are decorrelated, it is not logical to check connection flags
when using sendto.
This require to store the L4 peer address in quic_conn to be able to use
sendto.
This change is required to delay allocation of connection.
This flag is named RX_F_LOCAL_ACCEPT. It will be activated for special
receivers where connection balancing to threads is already handle
outside of listener_accept, such as with QUIC listeners.
Add a new function in mux-quic to install app-ops. For now this
functions is called during the ALPN negotiation of the QUIC handshake.
This change will be useful when the connection accept queue will be
implemented. It will be thus required to delay the app-ops
initialization because the mux won't be allocated anymore during the
QUIC handshake.
Define a new enum to represent the status of the mux/connection layer
above a quic_conn. This is important to know if it's possible to handle
application data, or if it should be buffered or dropped.
This new option, when set, will cause the callers of pool_alloc() and
pool_free() to be recorded into an extra area in the pool that is expected
to be helpful for later inspection (e.g. in core dumps). For example it
may help figure that an object was released to a pool with some sub-fields
not yet released or that a use-after-free happened after releasing it,
with an immediate indication about the exact line of code that released
it (possibly an error path).
This only works with the per-thread cache, and even objects refilled from
the shared pool directly into the thread-local cache will have a NULL
there. That's not an issue since these objects have not yet been freed.
It's worth noting that pool_alloc_nocache() continues not to set any
caller pointer (e.g. when the cache is empty) because that would require
a possibly undesirable API change.
The extra cost is minimal (one pointer per object) and this completes
well with DEBUG_POOL_INTEGRITY.
This adds a caller to pool_put_to_cache() and pool_get_from_cache()
which will optionally be used to pass a pointer to their callers. For
now it's not used, only the API is extended to support this pointer.
Here the idea is to calculate the POOL_EXTRA size that is appended at
the end of a pool object based on the sum of enabled optional fields
so that we can more easily compute offsets and sizes depending on build
options.
For this, POOL_EXTRA is replaced with POOL_EXTRA_MARK which itself is
set either to sizeof(void*) or zero depending on whether we enable
marking the origin pool or not upon allocation.
The pool_alloc() function was already a wrapper to __pool_alloc() which
was also inlined but took a set of flags. This latter was uninlined and
moved to pool.c, and pool_alloc()/pool_zalloc() turned to macros so that
they can more easily evolve to support debugging options.
The number of call places made this code grow over time and doing only
this change saved ~1% of the whole executable's size.
The pool_free() function has become a bit big over time due to the
extra consistency checks. It used to remain inline only to deal
cleanly with the NULL pointer free that's quite present on some
structures (e.g. in stream_free()).
Here we're splitting the function in two:
- __pool_free() does the inner block without the pointer test and
becomes a function ;
- pool_free() is now a macro that only checks the pointer and calls
__pool_free() if needed.
The use of a macro versus an inline function is only motivated by an
easier intrumentation of the code later.
With this change, the code size reduces by ~1%, which means that at
this point all pool_free() call places used to represent more than
1% of the total code size.
Allow to register quic_conn as ex-data in SSL callbacks. A new index is
used to identify it as ssl_qc_app_data_index.
Replace connection by quic_conn as SSL ex-data when initializing the QUIC
SSL session. When using SSL callbacks in QUIC context, the connection is
now NULL. Used quic_conn instead to retrieve the required parameters.
Also clean up
The same changes are conducted inside the QUIC SSL methods of xprt-quic
: connection instance usage is replaced by quic_conn.
Define a special accept cb for QUIC listeners to quic_session_accept().
This operation is conducted during the proto.add callback when creating
listeners.
A special care is now taken care when setting the standard callback
session_accept_fd() to not overwrite if already defined by the proto
layer.
When enabled, objects picked from the cache are checked for corruption
by comparing their contents against a pattern that was placed when they
were inserted into the cache. Objects are also allocated in the reverse
order, from the oldest one to the most recent, so as to maximize the
ability to detect such a corruption. The goal is to detect writes after
free (or possibly hardware memory corruptions). Contrary to DEBUG_UAF
this cannot detect reads after free, but may possibly detect later
corruptions and will not consume extra memory. The CPU usage will
increase a bit due to the cost of filling/checking the area and for the
preference for cold cache instead of hot cache, though not as much as
with DEBUG_UAF. This option is meant to be usable in production.
We have an anti-looping protection in process_stream() that detects bugs
that used to affect a few filters like compression in the past which
sometimes forgot to handle a read0 or a particular error, leaving a
thread looping at 100% CPU forever. When such a condition is detected,
an alert it emitted and the process is killed so that it can be replaced
by a sane one:
[ALERT] (19061) : A bogus STREAM [0x274abe0] is spinning at 2057156
calls per second and refuses to die, aborting now! Please
report this error to developers [strm=0x274abe0,3 src=unix
fe=MASTER be=MASTER dst=<MCLI> txn=(nil),0 txn.req=-,0
txn.rsp=-,0 rqf=c02000 rqa=10000 rpf=88000021 rpa=8000000
sif=EST,40008 sib=DIS,84018 af=(nil),0 csf=0x274ab90,8600
ab=0x272fd40,1 csb=(nil),0
cof=0x25d5d80,1300:PASS(0x274aaf0)/RAW((nil))/unix_stream(9)
cob=(nil),0:NONE((nil))/NONE((nil))/NONE(0) filters={}]
call trace(11):
| 0x4dbaab [c7 04 25 01 00 00 00 00]: stream_dump_and_crash+0x17b/0x1b4
| 0x4df31f [e9 bd c8 ff ff 49 83 7c]: process_stream+0x382f/0x53a3
(...)
One problem with this detection is that it used to only count the call
rate because we weren't sure how to make it more accurate, but the
threshold was high enough to prevent accidental false positives.
There is actually one case that manages to trigger it, which is when
sending huge amounts of requests pipelined on the master CLI. Some
short requests such as "show version" are sufficient to be handled
extremely fast and to cause a wake up of an analyser to parse the
next request, then an applet to handle it, back and forth. But this
condition is not an error, since some data are being forwarded by
the stream, and it's easy to detect it.
This patch modifies the detection so that update_freq_ctr() only
applies to calls made without CF_READ_PARTIAL nor CF_WRITE_PARTIAL
set on any of the channels, which really indicates that nothing is
happening at all.
This is greatly sufficient and extremely effective, as the call above
is still caught (shutr being ignored by an analyser) while a loop on
the master CLI now has no effect. The "call_rate" field in the detailed
"show sess" output will now be much lower, except for bogus streams,
which may help spot them. This field is only there for developers
anyway so it's pretty fine to slightly adjust its meaning.
This patch could be backported to stable versions in case of reports
of such an issue, but as that's unlikely, it's not really needed.
There is no need to use an MT_LIST to store frames to send from a packet
number space. This is a reminiscence for multi-threading support for the TX part.
For now we have co_getline() which reads a buffer and stops on LF, and
co_getword() which reads a buffer and stops on one arbitrary delimiter.
But sometimes we'd need to stop on a set of delimiters (CR and LF, etc).
This patch adds a new function co_getdelim() which takes a set of delimiters
as a string, and constructs a small map (32 bytes) that's looked up during
parsing to stop after the first delimiter found within the set. It also
supports an optional escape character that skips a delimiter (typically a
backslash). For the rest it works exactly like the two other variants.
During 2.4-dev, fault injection was enabled for cached pools with commit
207c09509 ("MINOR: pools: move the fault injector to __pool_alloc()"),
except that the condition for CONFIG_HAP_POOLS still depended on
DEBUG_FAIL_ALLOC not being set, which limits the usability to cases
where the define is set by hand. Let's remove it from the equation as
this is not a constraint anymore. While a bit old, there's no need to
backport this as it's only used during development.
Implement the emission of Retry packets. These packets are emitted in
response to Initial from clients without token. The token from the Retry
packet contains the ODCID from the Initial packet.
By default, Retry packet emission is disabled and the handshake can
continue without address validation. To enable Retry, a new bind option
has been defined named "quic-force-retry". If set, the handshake must be
conducted only after receiving a token in the Initial packet.
Implement the parsing of token from Initial packets. It is expected that
the token contains a CID which is the DCID from the Initial packet
received from the client without token which triggers a Retry packet.
This CID is then used for transport parameters.
Note that at the moment Retry packet emission is not implemented. This
will be achieved in a following commit.
Implement a new QUIC TLS related function
quic_tls_generate_retry_integrity_tag(). This function can be used to
calculate the AEAD tag of a Retry packet.
If an error is raised during the ClientHello callback on the server side
(ssl_sock_switchctx_cbk), the servername callback won't be called and
the client's SNI will not be saved in the SSL context. But since we use
the SSL_get_servername function to return this SNI in the ssl_fc_sni
sample fetch, that means that in case of error, such as an SNI mismatch
with a frontend having the strict-sni option enabled, the sample fetch
would not work (making strict-sni related errors hard to debug).
This patch fixes that by storing the SNI as an ex_data in the SSL
context in case the ClientHello callback returns an error. This way the
sample fetch can fallback to getting the SNI this way. It will still
first call the SSL_get_servername function first since it is the proper
way of getting a client's SNI when the handshake succeeded.
In order to avoid memory allocations are runtime into this highly used
runtime function, a new memory pool was created to store those client
SNIs. Its entry size is set to 256 bytes since SNIs can't be longer than
255 characters.
This fixes GitHub #1484.
It can be backported in 2.5.
Avoid closing idle connections if a soft stop is in progress.
By default, idle connections will be closed during a soft stop. In some
environments, a client talking to the proxy may have prepared some idle
connections in order to send requests later. If there is no proper retry
on write errors, this can result in errors while haproxy is reloading.
Even though a proper implementation should retry on connection/write
errors, this option was introduced to support back compat with haproxy <
v2.4. Indeed before v2.4, we were waiting for a last request to be able
to add a "connection: close" header and advice the client to close the
connection.
In a real life example, this behavior was seen in AWS using the ALB in
front of a haproxy. The end result was ALB sending 502 during haproxy
reloads.
This patch was tested on haproxy v2.4, with a regular reload on the
process, and a constant trend of requests coming in. Before the patch,
we see regular 502 returned to the client; when activating the option,
the 502 disappear.
This patch should help fixing github issue #1506.
In order to unblock some v2.3 to v2.4 migraton, this patch should be
backported up to v2.4 branch.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
[wt: minor edits to the doc to mention other options to care about]
Signed-off-by: Willy Tarreau <w@1wt.eu>
When block by the anti-amplification limit, this is the responsability of the
client to unblock it sending new datagrams. On the server side, even if not
well parsed, such datagrams must trigger the PTO timer arming.
Switch back to QUIC_HS_ST_SERVER_HANDSHAKE state after a completed handshake
if acks must be send.
Also ensure we build post handshake frames only one time without using prev_st
variable and ensure we discard the Handshake packet number space only one time.
We need to be able to decrypt late Handshake packets after the TLS secret
keys have been discarded. If not the peer send Handshake packet which have
not been acknowledged. But for such packets, we discard the CRYPTO data.
RFC 9002 5.3. Estimating smoothed_rtt and rttvar:
MUST use the lesser of the acknowledgment delay and the peer's max_ack_delay
after the handshake is confirmed.
In ticket #1413, the transfer of FDs couldn't correctly work on alpine
linux. After a few tests with musl on another distribution it seems to
be a limitation of this libc.
The number of FD that could be sent per sendmsg was set to 253, which
does not seem to work with musl, decreasing it 252 seems to work
better, so lets set this value everywhere since it does not have that
much impact.
This must be backported in every maintained version.
Now that we support batched allocations/releases, it appears that we can
reach the same performance on H2 with shared pools and 256kB thread-local
cache as without shared pools, a fast allocator and 1MB thread-local cache.
With 512kB we're up to 10% faster on highly multiplexed H2 than without the
shared cache. This was tested on a 16-core ARM machine. Thus it's time to
slightly reduce the per-thread memory cost, which may also improve the
performance on machines with smaller L2 caches. It essentially reverts
commit f587003fe ("MINOR: pools: double the local pool cache size to 1 MB").
Since previous patch we can forcefully evict multiple objects from the
local cache, even when evicting basd on the LRU entries. Let's define
a compile-time configurable setting to batch releasing of objects. For
now we set this value to 8 items per round.
This is marked medium because eviction from the LRU will slightly change
in order to group the last items that are freed within a single cache
instead of accurately scanning only the oldest ones exactly in their
order of appearance. But this is required in order to evolve towards
batched removals.
In order to support batched allocations and releases, we'll need to
prepare chains of items linked together and that can be atomically
attached and detached at once. For this we implement a "down" pointer
in each pool_item that points to the other items belonging to the same
group. For now it's always NULL though freeing functions already check
them when trying to release everything.
At the moment we count the number of releasable objects to a shared pool
one by one. The way the formula is made allows to pre-compute the number
of available slots, so let's add a function for that so that callers can
do it once before iterating.
This takes into account the average number of entries needed and the
minimum availability per pool. The function is not used yet.
In order to support batch allocation from/to shared pools, we'll have to
support a specific representation for pool objects. The new pool_item
structure will be used for this. For now it only contains a "next"
pointer that matches exactly the current storage model. The few functions
that deal with the shared pool entries were adapted to use the new type.
There is no functionality difference at this point.
Instead of letting pool_put_to_shared_cache() pass the object to the
underlying OS layer when there's no more room, let's have the caller
check if the pool is full and either call pool_put_to_shared_cache()
or call pool_free_nocache().
Doing this sensibly simplifies the code as this function now only has
to deal with a pool and an item and only for cases where there are
local caches and shared caches. As the code was simplified and the
calls more isolated, the function was moved to pool.c.
Note that it's only called from pool_evict_from_local_cache{,s}() and
that a part of its logic might very well move there when dealing with
batches.
This function is used to know whether the shared pools are full or if we
can store more objects in them. Right now it cannot be used in a generic
way because when shared pools are not used it will return false, letting
one think pools can accept objects. Let's make one variant for each build
model.
At the moment pool_put_to_shared_cache() checks if the pool is crowded,
and if so it does the exact same job as pool_free_nocache(), otherwise
it adds the object there.
This patch rearranges the code so that the function is split in two and
either uses one path or the other, and always relies on pool_free_nocache()
in case we don't want to store the object. This way there will be a common
path with the variant not using the shared cache. The patch is better viewed
using git show -b since a whole block got reindented.
It's worth noting that there is a tiny difference now in the local cache
usage measurement, as the decrement of "used" used to be performed before
checking for pool_is_crowded() instead of being done after. This used to
result in always one less object being kept in the cache than what was
configured in minavail. The rearrangement of the code aligns it with
other call places.
Some changes affect the list element and others affect the pool stats.
Better group them together, as the compiler may not detect certain
possible optimizations after the casts made by the list macros.
One of the thread scaling challenges nowadays for the pools is the
contention on the shared caches. There's never any situation where we
have a shared cache and no local cache anymore, so we can technically
afford to transfer objects from the shared cache to the local cache
before returning them to the user via the regular path. This adds a
little bit more work per object per miss, but will permit batch
processing later.
This patch simply moves pool_get_from_shared_cache() to pool.c under
the new name pool_refill_local_from_shared(), and this function does
not return anything but it places the allocated object at the head of
the local cache.
The POOL_LINK macro is now only used for debugging, and it still requires
ifdefs around, which needlessly complicates the code. Let's replace it
and the calling code with a new pair of macros: POOL_DEBUG_SET_MARK()
and POOL_DEBUG_CHECK_MARK(), that respectively store and check the pool
pointer in the extra location at the end of the pool. This removes 4
pairs of ifdefs in the middle of the code.
This practice relying on POOL_LINK() dates from the era where there were
no pool caches, but given that the structures are a bit more complex now
and that pool caches do not make use of this feature, it is totally
useless since released elements have already been overwritten, and yet
it complicates the architecture and prevents from making simplifications
and optimizations. Let's just get rid of this feature. The pointer to
the origin pool is preserved though, as it helps detect incorrect frees
and serves as a canary for overflows.
The pools have become complex with the shared pools and the thread-local
caches, and the purpose of certain structures is never easy to grasp.
Let's add a bit of documentation there to save some long and painful
analysis to those touching that area.
This bug was introduced by d817dc73 ("MEDIUM: ssl: Load client
certificates in a ckch for backend servers") in which the creation of
the SSL_CTX for a server was moved to the configuration parser when
using a "crt" keyword instead of being done in ssl_sock_prepare_srv_ctx().
The patch 0498fa40 ("BUG/MINOR: ssl: Default-server configuration ignored by
server") made it worse by setting the same SSL_CTX for every servers
using a default-server. Resulting in any SSL option on a server applied
to every server in its backend.
This patch fixes the issue by reintroducing a string which store the
path of certificate inside the server structure, and loading the
certificate in ssl_sock_prepare_srv_ctx() again.
This is a quick fix to backport, a cleaner way can be achieve by always
creating the SSL_CTX in ssl_sock_prepare_srv_ctx() and splitting
properly the ssl_sock_load_srv_cert() function.
This patch fixes issue #1488.
Must be backported as far as 2.4.
This is a second help to dump loaded library names late at boot, once
external code has already been initialized. The purpose is to provide
a format that makes it easy to pass to "tar" to produce an archive
containing the executable and the list of dependencies. For example
if haproxy is started as "haproxy -f foo.cfg", a config check only
will suffice to quit before starting, "-q" will be used to disable
undesired output messages, and -dL will be use to dump libraries.
This will result in such a command to trivially produce a tarball
of loaded libraries:
./haproxy -q -c -dL -f foo.cfg | tar -T - -hzcf archive.tgz
Many times core dumps reported by users who experience trouble are
difficult to exploit due to missing system libraries. Sometimes,
having just a list of loaded libraries and their respective addresses
can already provide some hints about some problems.
This patch makes a step in that direction by adding a new "show libs"
command that will try to enumerate the list of object files that are
loaded in memory, relying on the dynamic linker for this. It may also
be used to detect that some foreign code embarks other undesired libs
(e.g. some external Lua modules).
At the moment it's only supported on glibc when USE_DL is set, but it's
implemented in a way that ought to make it reasonably easy to be extended
to other platforms.
We'll use this glibc function to dump loaded libs. It's been
available since glibc-2.2.4, and as it requires dlpi headers defined
in link.h, it implicitly relies on dlfcn, thus we condition it to
USE_DL. Other operating systems or libc might have different
dependencies so let's stick to the bare minimum for now.
A subtle change of target address allocation was introduced with commit
68cf3959b ("MINOR: backend: rewrite alloc of stream target address") in
2.4. Prior to this patch, a target address was allocated by function
assign_server_address() only if none was previously allocated. After
the change, the allocation became unconditional. Most of the time it
makes no difference, except when we pass multiple times through
connect_server() with SF_ADDR_SET cleared.
The most obvious fix would be to avoid allocating that address there
when already set, but the root cause is that since introduction of
dynamically allocated addresses, the SF_ADDR_SET flag lies. It can
be cleared during redispatch or during a queue redistribution without
the address being released.
This patch instead gives back all its correct meaning to SF_ADDR_SET
and guarantees that when not set no address is allocated, by freeing
that address at the few places the flag is cleared. The flag could
even be removed so that only the address is checked but that would
require to touch many areas for no benefit.
The easiest way to test it is to send requests to a proxy with l7
retries enabled, which forwards to a server returning 500:
defaults
mode http
timeout client 1s
timeout server 1s
timeout connect 1s
retry-on all-retryable-errors
retries 1
option redispatch
listen proxy
bind *:5000
server app 0.0.0.0:5001
frontend dummy-app
bind :5001
http-request return status 500
Issuing "show pools" on the CLI will show that pool "sockaddr" grows
as requests are redispatched, and remains stable with the fix. Even
"ps" will show that the process' RSS grows by ~160B per request.
This fix will need to be backported to 2.4. Note that before 2.5,
there's no strm->si[1].dst, strm->target_addr must be used instead.
This addresses github issue #1499. Special thanks to Daniil Leontiev
for providing a well-documented reproducer.
Implement a refcount on quic_conn instance. By default, the refcount is
0. Two functions are implemented to manipulate it.
* qc_conn_take() which increments the refcount
* qc_conn_drop() which decrements it. If the refcount is 0 *BEFORE*
the substraction, the instance is freed.
The refcount is incremented on retrieve_qc_conn_from_cid() or when
allocating a new quic_conn in qc_lstnr_pkt_rcv(). It is substracted most
notably by the xprt.close operation and at the end of
qc_lstnr_pkt_rcv(). The increments/decrements should be conducted under
the CID lock to guarantee thread-safety.
Add a pointer in quic_conn to its related ssl_sock_ctx. This change is
required to avoid to use the connection instance to access it.
This commit is part of the rearchitecture of xprt-quic layers and the
separation between xprt and connection instances. It will be notably
useful when the connection allocation will be delayed.
Some applications may send some information about the reason why they decided
to close a connection. Add them to CONNECTION_CLOSE frame traces.
Take the opportunity of this patch to shorten some too long variable names
without any impact.
Add traces about important frame types to chunk_tx_frm_appendf()
and call this function for any type of frame when parsing a packet.
Move it to quic_frame.c
Prepare trace support for quic_conn instances as argument. This will be
used by the xprt-quic layer in replacement of the connection.
This commit is part of the rearchitecture of xprt-quic layers and the
separation between xprt and connection instances.
Add const qualifier on arguments of several dump functions used in the
trace callback. This is required to be able to replace the first trace
argument by a quic_conn instance. The first argument is a const pointer
and so the members accessed through it must also be const.
Add a new member in ssl_sock_ctx structure to reference the quic_conn
instance if used in the QUIC stack. This member is initialized during
qc_conn_init().
This is needed to be able to access to the quic_conn without relying on
the connection instance. This commit is part of the rearchitecture of
xprt-quic layers and the separation between xprt and connection
instances.
Move qcc_get_qcs() function from xprt_quic.c to mux_quic.c. This
function is used to retrieve the qcs instance from a qcc with a stream
id. This clearly belongs to the mux-quic layer.
When a packet is present in the RX buffer at the first place
but without a null reference counter, there is no need to continue
to try to empty the buffer, it is sure the next packet will not
be at the first place!
With the DCID refactoring, the locking is more centralized. It is
possible to simplify the code for removal of a quic_conn from the ODCID
tree.
This operation can be conducted as soon as the connection has been
retrieved from the DCID tree, meaning that the peer now uses the final
DCID. Remove the bit to flag a connection for removal and just uses
ebmb_delete() on each sucessful lookup on the DCID tree. If the
quic_conn has already been removed, it is just a noop thanks to
eb_delete() implementation.
A new function named qc_retrieve_conn_from_cid() now contains all the
code to retrieve a connection from a DCID. It handle all type of packets
and centralize the locking on the ODCID/DCID trees.
This simplify the qc_lstnr_pkt_rcv() function.
If an UDP datagram contains multiple QUIC packets, they must all use the
same DCID. The datagram context is used partly for this.
To ensure this, a comparison was made on the dcid_node of DCID tree. As
this is a comparison based on pointer address, it can be faulty when
nodes are removed/readded on the same pointer address.
Replace this comparison by a proper comparison on the DCID data itself.
To this end, the dgram_ctx structure contains now a quic_cid member.
For first Initial packets, the socket source dest address is
concatenated to the DCID. This is used to be able to differentiate
possible collision between several clients which used the same ODCID.
Refactor the code to manage DCID and the concatenation with the address.
Before this, the concatenation was done on the quic_cid struct and its
<len> field incremented. In the code it is difficult to differentiate a
normal DCID with a DCID + address concatenated.
A new field <addrlen> has been added in the quic_cid struct. The <len>
field now only contains the size of the QUIC DCID. the <addrlen> is
first initialized to 0. If the address is concatenated, it will be
updated with the size of the concatenated address. This now means we
have to explicitely used either cid.len or cid.len + cid.addrlen to
access the DCID or the DCID + the address. The code should be clearer
thanks to this.
The field <odcid_len> in quic_rx_packet struct is now useless and has
been removed. However, a new parameter must be added to the
qc_new_conn() function to specify the size of the ODCID addrlen.
On haproxy implementation, generated DCID are on 8 bytes, the minimal
value allowed by the specification. Rename the constant representing
this size to inform that this is haproxy specific.
The packet number space flags were mixed with the connection level flags.
This leaded to ACK to be sent at the connection level without regard to
the underlying packet number space. But we want to be able to acknowleged
packets for a specific packet number space.
A client sends a 0-RTT data packet after an Initial one in the same datagram.
We must be able to parse such packets just after having parsed the Initial packets.
Export the code responsible which set the ->app_ops structure into
quic_set_app_ops() function. It must be called by the TLS callback which
selects the application (ssl_sock_advertise_alpn_protos) so that
to be able to build application packets after having received 0-RTT data.
This field is no more useful. Modify the traces consequently.
Also initialize ->pn_node.key value to -1, which is an illegal value
for QUIC packet number, and display it in traces if different from -1.
This patch adds the parsing of the optional condition parameters that
can be passed to the set-var and set-var-fmt actions (http as well as
tcp). Those conditions will not be taken into account yet in the var_set
function so conditions passed as parameters will not have any effect.
Since actions do not benefit from the parameter preparsing that
converters have, parsing conditions needed to be done by hand.
This patch adds the parsing of the optional condition parameters that
can be passed to the set-var converter. Those conditions will not be
taken into account yet in the var_set function so conditions passed as
parameters will not have any effect. This is true for any condition
apart from the "ifexists" one that is also used to replace the
VF_UPDATEONLY flag that was used to prevent proc scope variable creation
from a LUA module.
In LibreSSL 3.5.0, BIO is going to become opaque, so haproxy's
compat macros will no longer work. The functions they substitute
have been available since LibreSSL 2.7.0.
allowing for all platforms supporting cpu affinity to have a chance
to detect the cpu topology from a given valid node (e.g.
DragonflyBSD seems to be NUMA aware from a kernel's perspective
and seems to be willing start to provide userland means to get
proper info).
This was reported by the CI wich clang as compilator.
In file included from src/ssl_sock.c:80:
include/haproxy/xprt_quic.h:1100:50: error: passing 'int *' to parameter of
type 'unsigned int *' converts between pointers to integer types with
different sign [-Werror,-Wpointer-sign]
} while (refcnt && !HA_ATOMIC_CAS(&pkt->refcnt, &refcnt, refcnt - 1));
^~~~~~~
Initialize all flow control members on the qcc instance. Without this,
the value are undefined and it may be possible to have errors about
reached streams limit.
The xprt layer is reponsible to notify the mux of a CONNECTION_CLOSE
reception. In this case the flag QC_CF_CC_RECV is positionned on the
qcc and the mux tasklet is waken up.
One of the notable effect of the QC_CF_CC_RECV is that each qcs will be
released even if they have remaining data in their send buffers.
A qcs is not freed if there is remaining data in its buffer. In this
case, the flag QC_SF_DETACH is positionned.
The qcc io handler is responsible to remove the qcs if the QC_SF_DETACH
is set and their buffers are empty.
Replace bug.h by api.h in mux_quic header.
This is required because bug.h uses atomic operations when compiled with
DEBUG_MEM_STATS. api.h takes care of including atomic.h before bug.h.
Set the HTX EOM flag on RX the app layer. This is required to notify
about the end of the request for the stream analyzers, else the request
channel never goes to MSG_DONE state.
Remove qc_eval_pkt() which has come with the multithreading support. It
was there to evaluate the length of a TX packet before building. We could
build from several thread TX packets without consuming a packet number for nothing (when
the building failed). But as the TX packet building functions are always
executed by the same thread, the one attached to the connection, this does
not make sense to continue to use such a function. Furthermore it is buggy
since we had to recently pad the TX packet under certain circumstances.
After the handshake has succeeded, we must delete any remaining
Initial or Handshake packets from the RX buffer. This cannot be
done depending on the state the connection (->st quic_conn struct
member value) as the packet are not received/treated in order.
Add a null byte to the end of the RX buffer to notify the consumer there is no
more data to treat.
Modify quic_rx_packet_pool_purge() which is the function which remove the
RX packet from the buffer.
Also rename this function to quic_rx_pkts_del().
As the RX packets may be accessed by the QUIC connection handler (quic_conn_io_cb())
the function responsible of decrementing their reference counters must not
access other information than these reference counters! It was a very bad idea
to try to purge the RX buffer asap when executing this function.
Handle the case when the app layer sending buffer is full. A new flag
QC_SF_BLK_MROOM is set in this case and the transfer is interrupted. It
is expected that then the conn-stream layer will subscribe to SEND.
The MROOM flag is reset each time the muxer transfer data from the app
layer to its own buffer. If the app layer has been subscribed on SEND it
is woken up.
Implement the subscription in the mux on the qcs instance.
Subscribe is now used by the h3 layer when receiving an incomplete frame
on the H3 control stream. It is also used when attaching the remote
uni-directional streams on the h3 layer.
In the qc_send, the mux wakes up the qcs for each new transfer executed.
This is done via the method qcs_notify_send().
The xprt wakes up the qcs when receiving data on unidirectional streams.
This is done via the method qcs_notify_recv().
Set the QC_SF_FIN_STREAM on the app layers (h3 / hq-interop) when
reaching the HTX EOM. This is used to warn the mux layer to set the FIN
on the QUIC stream.
Re-implement the QUIC mux. It will reuse the mechanics from the previous
mux without all untested/unsupported features. This should ease the
maintenance.
Note that a lot of features are broken for the moment. They will be
re-implemented on the following commits to have a clean commit history.
ha_backtrace_to_stderr() must be declared in CRASH_NOW() macro whe HAProxy
is compiled with DEBUG_STRICT_NOCRASH. Otherwise an error is reported during
compilation:
include/haproxy/bug.h:58:26: error: implicit declaration of function ‘ha_backtrace_to_stderr’ [-Werror=implicit-function-declaration]
58 | #define CRASH_NOW() do { ha_backtrace_to_stderr(); } while (0)
This patch must be backported as far as 2.4.
If H1 headers are not fully received at once, the parsing is restarted a
last time when all headers are finally received. When this happens, the h1m
flags are sanitized to remove all value set during parsing.
But some flags where erroneously preserved. Among others, H1_MF_TE_CHUNKED
flag was not removed, what could lead to parsing error.
To fix the bug and make things easy, a mask has been added with all flags
that must be preserved. It will be more stable. This mask is used to
sanitize h1m flags.
This patch should fix the issue #1469. It must be backported to 2.5.
When the response is parsed, query items are stored in a list, attached to
the parsed response (resolve_response).
First, there is one and only one query sent at a time. Thus, there is no
reason to use a list. There is a test to be sure there is only one query
item in the response. Then, the reference on this query item is only used to
validate the domain name is the one requested. So the query list can be
removed. We only expect one query item, no reason to loop on query records.
In addition, the query domain name is now immediately checked against the
resolution domain name. This way, the query item is only manipulated during
the response parsing.
During post-parsing stage, the SSL context of a server is initialized if SSL
is configured on the server or its default-server. It is required to be able
to enable SSL at runtime. However a regression was introduced, because the
last parsed default-server is used. But it is not necessarily the
default-server line used to configure the server. This may lead to
erroneously initialize the SSL context for a server without SSL parameter or
the skip it while it should be done.
The problem is the default-server used to configure a server is not saved
during configuration parsing. So, the information is lost during the
post-parsing. To fix the bug, the SRV_F_DEFSRV_USE_SSL flag is
introduced. It is used to know when a server was initialized with a
default-server using SSL.
For the record, the commit f63704488e ("MEDIUM: cli/ssl: configure ssl on
server at runtime") has introduced the bug.
This patch must be backported as far as 2.4.
Apple libmalloc has its own notion of memory arenas as malloc_zone with
rich API having various callbacks for various allocations strategies but
here we just use the defaults.
In trim_all_pools, we advise to purge each zone as much as possible, called "greedy" mode.
As soon as the connection ID (the one choosen by the QUIC server) has been used
by the client, we can delete its original destination connection ID from its tree.
When running Key Update process, we must maintain much information
especially when the key phase bit has been toggled by the peer as
it is possible that it is due to late packets. This patch adds
quic_tls_kp new structure to do so. They are used to store
previous and next secrets, keys and IVs associated to the previous
and next RX key phase. We also need the next TX key phase information
to be able to encrypt packets for the next key phase.
When sending a CONNECTION_CLOSE frame to immediately close the connection,
do not provide CRYPTO data to the TLS stack. Do not built anything else than a
CONNECTION_CLOSE and do not derive any secret when in immediately close state.
Seize the opportunity of this patch to rename ->err quic_conn struct member
to ->error_code.
We set this TLS error when no application protocol could be negotiated
via the TLS callback concerned. It is converted as a QUIC CRYPTO_ERROR
error (0x178).
Change the way the CIDs are organized to rattach received packets DCID
to QUIC connection. This is necessary to be able to handle multiple DCID
to one connection.
For this, the quic_connection_id structure has been extended. When
allocated, they are inserted in the receiver CID tree instead of the
quic_conn directly. When receiving a packet, the receiver tree is
inspected to retrieve the quic_connection_id. The quic_connection_id
contains now contains a reference to the QUIC connection.
Add ->err member to quic_conn struct to store the connection errors.
This is the responsability of ->send_alert callback of SSL_QUIC_METHOD
struct to handle the TLS alert and consequently update ->err value.
At this time, when entering qc_build_pkt() we build a CONNECTION_CLOSE
frame close the connection when ->err value is not null.
If we want to run quic-tracker against haproxy, we must at least
support the draft version of the TLS extension for the QUIC transport
parameters (0xffa5). quic-tracker QUIC version is draft-29 at this time.
We select this depending on the QUIC version. If draft, we select the
draft TLS extension.
When establishing an outboud connection, haproxy checks if the cached
TLS session has the same SNI as the connection we are trying to
resume.
This test was done by calling SSL_get_servername() which in TLSv1.2
returned the SNI. With TLSv1.3 this is not the case anymore and this
function returns NULL, which invalidates any outboud connection we are
trying to resume if it uses the sni keyword on its server line.
This patch fixes the problem by storing the SNI in the "reused_sess"
structure beside the session itself.
The ssl_sock_set_servername() now has a RWLOCK because this session
cache entry could be accessed by the CLI when trying to update a
certificate on the backend.
This fix must be backported in every maintained version, however the
RWLOCK only exists since version 2.4.
Implement a new app_ops layer for quic interop. This layer uses HTTP/0.9
on top of QUIC. Implementation is minimal, with the intent to be able to
pass interoperability test suite from
https://github.com/marten-seemann/quic-interop-runner.
It is instantiated if the negotiated ALPN is "hq-interop".
Remove the hardcoded initialization of h3 layer on mux init. Now the
ALPN is looked just after the SSL handshake. The app layer is then
installed if the ALPN negotiation returned a supported protocol.
This required to add a get_alpn on the ssl_quic layer which is just a
call to ssl_sock_get_alpn() from ssl_sock. This is mandatory to be able
to use conn_get_alpn().
This change is required to be able to use multiple app_ops layer on top
of QUIC. The stream-interface will now call the mux snd_buf which is
just a proxy to the app_ops snd_buf function.
The architecture may be simplified in the structure to install the
app_ops on the stream_interface and avoid the detour via the mux layer
on the sending path.
In 1.8 when muxes and conn_streams were introduced, the call to
conn_full_close() was replaced with a call to cs_close() which only
relied on shutr/shutw (commits 6978db35e ("MINOR: connection:
add cs_close() to close a conn_stream") and a553ae96f ("MEDIUM:
connection: replace conn_full_close() with cs_close()")). By then
this was fine, and the rare risk of non-idempotent calls was addressed
by the muxes implementing the functions (e.g. mux_pt).
Later with commit 325607397 ("MEDIUM: stream: do not forcefully close
the client connection anymore"), stream_free() started to call cs_close()
instead of forcibly closing the connection via conn_full_close(). At this
point this started to break idempotence because it was possible to emit
a shutw() (e.g. when option httpclose was set), then to have it called
agian upon stream_free() via cs_close(). By then it was not a problem
since only mux_pt would implement this and did check for idempotence.
When HTX was implemented and mux-h1/h2 offered support for shutw/shutr,
the idempotence changed a little bit because the last shutdown mode
(normal/silent) was recorded and used at the moment of closing. The
call to cs_close() uses the silent mode and will replace the current
one. This has an effect on data pending in the buffer if the FIN could
not be sent before cs_close(), because lingering may be disabled and
final data lost in the network stack.
Interestingly, during 2.4-dev3, this was addressed as the side effect
of an improvement by commit 3c82d8b32 ("MINOR: mux-h1: Rework how
shutdowns are handled"), where the H1 mux's shutdown function becomes
explicitly idempotent. However older versions (2.3 to 2.0) do not have
it.
This patch addresses the issue globally by making sure that cs_shutr()
and cs_shutw() are idempotent and cannot have their data truncated by
a late cs_close(). It fixes the truncation that is observed in 2.3 and
2.2 as described in issue #1450.
This must be backported as far as 2.0, along with commit f14d750bf
("BUG/MEDIUM: conn-stream: Don't reset CS flags on close") which it
depends on.
Implement a reload failure counter which counts the number of failure
since the last success. This counter is available in 'show proc' over
the master CLI.
cs_close() and cs_drain_and_close() are called to close a conn-stream.
cs_shutr() and cs_shutw() are called with the appropriate modes. But the
conn-stream is not released at this stage. However the flags are
reset. Thus, after a cs_close(), we loose shutdown flags. If cs_close() is
performed several times, it is a problem. And indeed, it is possible. On one
hand, the stream-interface may close the conn-stream. On the other end, the
stream always closes it when it is released.
It is a problem for the H1 multiplexer. Because the conn-stream flags are
reset, the shutr and shutw are performed twice. For a delayed shutdown, the
dirty mode is used instead of the normal one because the last call to
h1_shutw() overwrite H1C flags set by the first call. This leads to dirty
shutdowns while normal ones are required. At the end, it is possible to
truncate the messages.
This bug was revealed by the commit a85c522d4 ("BUG/MINOR: mux-h1: Save
shutdown mode if the shutdown is delayed").
This patch is related to the issue #1450. It must be backported as far as
2.0.
- add new metric: `haproxy_backend_agg_server_check_status`
it counts the number of servers matching a specific check status
this permits to exclude per server check status as the usage is often
to rely on the total. Indeed in large setup having thousands of
servers per backend the memory impact is not neglible to store the per
server metric.
- realign promex_str_metrics array
quite simple implementation - we could improve it later by adding an
internal state to the prometheus exporter, thus to avoid counting at
every dump.
this patch is an attempt to close github issue #1312. It may bebackported
to 2.4 if requested.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
`info_field_names` and `stat_field_names` no longer exist and have been
moved in stats.c
To avoid changing this comment, just mention the name of the new table
`info_fields` and `stat_fields`
Signed-off-by: William Dauchy <wdauchy@gmail.com>
This function claims to perform an strncat()-like operation but it does
not, it always copies the indicated number of bytes, regardless of the
presence of a NUL character (what is currently done by chunk_memcat()).
Let's remove it and explicitly replace it with chunk_memcat().
Commit 3d2093af9 ("MINOR: connection: Add a connection error code sample
fetch") added these convenient sample-fetch functions but it appears that
due to a misunderstanding the redundant "conn" part was kept in their
name, causing confusion, since "fc" already stands for "front connection".
Let's simply call them "fc_err" and "bc_err" to match all other related
ones before they appear in a final release. The VTC they appeared in were
also updated, and the alpha sort in the keywords table updated.
Cc: William Lallemand <wlallemand@haproxy.org>
->frms_rwlock is an old lock supposed to be used when several threads
could handle the same connection. This is no more the case since this
commit:
"MINOR: quic: Attach the QUIC connection to a thread."
Add a buffer per QUIC connection. At this time the listener which receives
the UDP datagram is responsible of identifying the underlying QUIC connection
and must copy the QUIC packets to its buffer.
->pkt_list member has been added to quic_conn struct to enlist the packets
in the order they have been copied to the connection buffer so that to be
able to consume this buffer when the packets are freed. This list is locked
thanks to a R/W lock to protect it from concurent accesses.
quic_rx_packet struct does not use a static buffer anymore to store the QUIC
packets contents.
At this time we allocate an RX buffer by thread.
Also take the opportunity offered by this patch to rename TX related variable
names to distinguish them from the RX part.
This patch renames all dns extra counters and stats functions, types and
enums using the 'resolv' prefix/suffixes.
The dns extra counter domain id used on cli was replaced by "resolvers"
instead of "dns".
The typed extra counter prefix dumping resolvers domain "D." was
also renamed "N." because it points counters on a Nameserver.
This was done to finish the split between "resolver" and "dns" layers
and to avoid further misunderstanding when haproxy will handle dns
load balancing.
This should not be backported.
This patch add a union and struct into dns_counter struct to split
application specific counters.
The only current existing application is the resolver.c layer but
in futur we could handle different application such as dns load
balancing with others specific counters.
This patch should not be backported.
Handle properly websocket streams if the server uses an ALPN with both
h1 and h2. Add a new field h2_ws in the server structure. If set to off,
reuse is automatically disable on backend and ALPN is forced to http1.x
if possible. Nothing is done if on.
Implement a mechanism to be able to use a different http version for
websocket streams. A new server member <ws> represents the algorithm to
select the protocol. This can overrides the server <proto>
configuration. If the connection uses ALPN for proto selection, it is
updated for websocket streams to select the right protocol.
Three mode of selection are implemented :
- auto : use the same protocol between non-ws and ws streams. If ALPN is
use, try to update it to "http/1.1"; this is only done if the server
ALPN contains "http/1.1".
- h1 : use http/1.1
- h2 : use http/2.0; this requires the server to support RFC8441 or an
error will be returned by haproxy.
Add a new parameter force_mux_ops. This will be useful to specify an
alternative to the srv->mux_proto field. If non-NULL, it will be use to
force the mux protocol wether srv->mux_proto is set or not.
This argument will become useful to install a mux for non-standard
streams, most notably websocket streams.
Implement a new function to update the ALPN on an existing connection.
on an existing connection. The ALPN from the ssl context can be checked
to update the ALPN only if it is a subset of the context value.
This method will be useful to change a connection ALPN for websocket,
must notably if the server does not support h2 websocket through the
rfc8441 Extended Connect.
Define a new stream flag SF_WEBSOCKET and a new cs flag CS_FL_WEBSOCKET.
The conn-stream flag is first set by h1/h2 muxes if the request is a
valid websocket upgrade. The flag is then converted to SF_WEBSOCKET on
the stream creation.
This will be useful to properly manage websocket streams in
connect_server().
With this feature the lua implementation of the httpclient is now able
to stream a payload larger than an haproxy buffer.
The hlua_httpclient_send() function is now split into:
hlua_httpclient_send() which initiate the httpclient and parse the lua
parameters
hlua_httpclient_snd_yield() which will send the request and be called
again to stream the request if the body is larger than an haproxy buffer
hlua_httpclient_rcv_yield() which will receive the response and store it
in the lua buffer.
This patch add a way to handle HTTP requests streaming using a
callback.
The end of the data must be specified by using the "end" parameter in
httpclient_req_xfer().
The memcpy() call in the aarch64 version of __ha_cas_dw() is sometimes
inlined and sometimes not, depending on the gcc version. It's only used
to copy two void*, so let's use direct assignment instead of memcpy().
It would also be possible to change the asm code to directly write there,
but it's not worth it.
With this change the code is 8kB smaller with gcc-5.4.
__atomic_compare_exchange() is incorrectly documented in the gcc builtins
doc, it says the desired value is "type *desired" while in reality it is
"const type *desired" as expected since that value must in no way be
modified by the operation. However it seems that clang has implemented
it as documented, and reports build warnings when fed a const.
This is quite problematic because it means we have to betry the callers,
pretending we won't touch their constants but not knowing what the
compiler would do with them, and possibly hiding future bugs.
Instead of forcing a cast, let's just switch to the better
__atomic_compare_exchange_n() that takes a value instead of a pointer.
At least with this one there is no doubt about how the input will be
used.
It was verified that the output object code is the same both in clang
and gcc with this change.
At a few places we were still using protocol_by_family() instead of
the richer protocol_lookup(). The former is limited as it enforces
SOCK_STREAM and a stream protocol at the control layer. At least with
protocol_lookup() we don't have this limitationn. The values were still
set for now but later we can imagine making them configurable on the
fly.
Instead of using sock_type and ctrl_type to select a protocol, let's
make use of the new protocol type. For now they always match so there
is no change. This is applied to address parsing and to socket retrieval
from older processes.
The protocol selection is currently performed based on the family,
control type and socket type. But this is often not enough, as both
only provide DGRAM or STREAM, leaving few variants. Protocols like
SCTP for example might be indistinguishable from TCP here. Same goes
for TCP extensions like MPTCP.
This commit introduces a new enum proto_type that is placed in each
and every protocol definition, that will usually more or less match
the sock_type, but being an enum, will support additional values.
For now, these addresses are never set. But the idea is to be able to set, at
least first, the client source and destination addresses at the stream level
without updating the session or connection ones.
Of course, because these addresses are carried by the strream-interface, it
would be possible to set server source and destination addresses at this level
too.
Functions to fill these addresses have been added: si_get_src() and
si_get_dst(). If not already set, these functions relies on underlying
layers to fill stream-interface addresses. On the frontend side, the session
addresses are used if set, otherwise the client connection ones are used. On
the backend side, the server connection addresses are used.
And just like for sessions and conncetions, si_src() and si_dst() may be used to
get source and destination addresses or the stream-interface. And, if not set,
same mechanism as above is used.
For now, these addresses are never set. But the idea is to be able to set
client source and destination addresses at the session level without
updating the connection ones.
Functions to fill these addresses have been added: sess_get_src() and
sess_get_dst(). If not already set, these functions relies on
conn_get_src() and conn_get_dst() to fill session addresses.
And just like for conncetions, sess_src() and sess_dst() may be used to get
source and destination addresses. However, if not set, the corresponding
address from the underlying client connection is returned. When this
happens, the addresses is filled in the connection object.
conn_get_src() and conn_get_dst() functions are used to fill the source and
destination addresses of a connection. On success, ->src and ->dst
connection fields can be safely used.
For convenience, 2 new functions are added here: conn_src() and conn_dst().
These functions return the corresponding address, as a const and only if it
is already set. Otherwise NULL is returned.
Flags used to set the execution context of a lua txn are used as an enum. It is
not uncommon but there are few flags otherwise. So to remove ambiguities, a
comment and a _NONE value are added to have a clear definition of supported
values.
This patch should fix the issue #1429. No backport needed.
httpclient_req_gen() takes a payload argument which can be use to put a
payload in the request. This payload can only fit a request buffer.
This payload can also be specified by the "body" named parameter within
the lua. httpclient.
It is also used within the CLI httpclient when specified as a CLI
payload with "<<".
Use include file <sys/time.h> to fix compilation error with timeval in
some files. This is as reported as 'man 7 system_data_types'. The build
error is reported on NetBSD 9.2.
This should be backported up to 2.2.
Some browsers may send Initial packets with sizes greater than 1252 bytes
(QUIC_INITIAL_IPV4_MTU). Let us increase this size limit up to 2048 bytes.
Also use this size for "max_udp_payload_size" transport parameter to limit
the size of the datagrams we want to receive.
Sometimes we'd like to do our best to drain pending data before closing
in order to save the peer from risking to receive an RST on close.
This adds a new connection flag CO_FL_WANT_DRAIN that is used to
trigger a call to conn_ctrl_drain() from conn_ctrl_close(), and the
sock_drain() function ignores fd_recv_ready() if this flag is set,
in order to catch latest data. It's not used for now.
This applicationn specific flag was added in 2.4-dev by commit 6fa8bcdc7
("MINOR: task: add an application specific flag to the state: TASK_F_USR1")
to help preserve a the idle connections status across wakeup calls. While
the code to do this was OK for tasklets, it was wrong for tasks, as in an
effort not to lose it when setting the RUNNING flag (that tasklets don't
have), it ended up being inconditionally set. It just happens that for now
no regular tasks use it, only tasklets.
This fix makes sure we always atomically perform (state & flags | running)
there, using a CAS. It also does it for tasklets because it was possible
to lose some such flags if set by another thread, even though this should
not happen with current code. In order to make the code more readable (and
avoid the previous mistake of repeated flags in the bit field), a new
TASK_PERSISTENT aggregate was declared in task.h for this.
In practice the CAS is cheap here because task states are stable or
convergent so the loop will almost never be taken.
This should be backported to 2.4.
This macro is similar to LIST_INLIST() except that it is guaranteed to
perform the test atomically, so that even if LIST_INLIST() is intrumented
with debugging code to perform extra consistency checks, it will not fail
when used in the context of barriers and atomic ops.
perf top shows that we spend a lot of time trying to read item->type in
the lookup loop, because the node is placed after the very long name,
so when the node is found, no data is in the cache yet. Let's simply
move the node upper in the struct. This results in the CPU usage of
resolv_validate_dns_response() to drop by 4 points.
A bogus test in b_get_varint(), b_put_varint(), b_peek_varint() shifts
the end of the buffer by one byte. Since the bug is the same in the read
and write functions, the buffer contents remain compatible, which explains
why this bug was not detected earlier. But if the buffer ends on an
aligned address or page, it can result in a one-byte overflow which will
typically cause a crash or an inconsistent behavior.
This API is only used by rings (e.g. for traces and boot messages) and
by DNS responses, so the probability to hit it is extremely low, but a
crash on boot was observed.
This must be backported to 2.2.
With SRV records, a huge amount of time is spent looking for records
by walking long lists. It is possible to reduce this by indexing values
in trees instead. However the whole code relies a lot on the list
ordering, and even implements some round-robin on it to distribute IP
addresses to servers.
This patch starts carefully by replacing the list with a an eb32 tree
that is still used like a list, with a constant key 0. Since ebtrees
preserve insertion order for duplicates, the tree walk visits the nodes
in the exact same order it did with the lists. This allows to implement
the required infrastructure without changing the behavior.
This one was used to indicate whether the callee had to follow particularly
safe code path when removing resolutions. Since the code now uses a kill
list, this is not needed anymore.
This code is dangerous enough that we certainly don't want external code
to ever approach it, let's not export unnecessary functions like this one.
It was made static and a comment was added about its purpose.
In order for all the error return values to be distributed on the same
side (instead of surrounding the success error code), the return values
for errors other than a simple verification failure are switched to
negative values. This way the result of the jwt_verify converter can be
compared strictly to 1 as well relative to 0 (any <= 0 return value is
an error).
The documentation was also modified to discourage conversion of the
return value into a boolean (which would definitely not work).
The PR_FL_READY flags must now be set on a proxy at the end of the
configuration validity check to notify it is fully configured and may be
safely used.
For now there is no real usage of this flag. But it will be usefull for
referenced default proxies to finish their configuration only once.
This patch is mandatory to support TCP/HTTP rules in defaults sections.
A proxy may now references the defaults section it is used. To do so, a
pointer on the default proxy was added in the proxy structure. And a
refcount must be used to track proxies using a default proxy. A default
proxy is destroyed iff its refcount is equal to zero and when it drops to
zero.
All this stuff must be performed during init/deinit staged for now. All
unreferenced default proxies are removed after the configuration parsing.
This patch is mandatory to support TCP/HTTP rules in defaults sections.
It is now possible to designate the defaults section to use by adding a name
of the corresponding defaults section and referencing it in the desired
proxy section. However, this introduces an ambiguity. This named defaults
section may still be implicitly used by other proxies if it is the last one
defined. In this case for instance:
default common
...
default frt from common
...
default bck from common
...
frontend fe from frt
...
backend be from bck
...
listen stats
...
Here, it is not really obvious the last section will use the 'bck' defaults
section. And it is probably not the expected behaviour. To help users to
properly configure their haproxy, a warning is now emitted if a defaults
section is explicitly AND implicitly used. The configuration manual was
updated accordingly.
Because this patch adds a warning, it should probably not be backported to
2.4. However, if is is backported, it depends on commit "MINOR: proxy:
Introduce proxy flags to replace disabled bitfield".
This change is required to support TCP/HTTP rules in defaults sections. The
'disabled' bitfield in the proxy structure, used to know if a proxy is
disabled or stopped, is replaced a generic bitfield named 'flags'.
PR_DISABLED and PR_STOPPED flags are renamed to PR_FL_DISABLED and
PR_FL_STOPPED respectively. In addition, everywhere there is a test to know
if a proxy is disabled or stopped, there is now a bitwise AND operation on
PR_FL_DISABLED and/or PR_FL_STOPPED flags.
These two fields are exclusive as they depend on the data type.
Let's move them into a union to save some precious bytes. This
reduces the struct resolv_answer_item size from 600 to 576 bytes.
The struct resolv_answer_item contains an address field of type
"sockaddr" which is only 16 bytes long, but which is used to store
either IPv4 or IPv6. Fortunately, the contents only overlap with
the "target" field that follows it and that is large enough to
absorb the extra bytes needed to store AAAA records. But this is
dangerous as just moving fields around could result in memory
corruption.
The fix uses a union and removes the casts that were used to hide
the problem.
Older versions need to be checked and possibly fixed. This needs
to be backported anyway.
In multi-threaded mode, on operating systems supporting multiple listeners on
the same IP:port, this will automatically create this number of multiple
identical listeners for the same line, all bound to a fair share of the number
of the threads attached to this listener. This can sometimes be useful when
using very large thread counts where the in-kernel locking on a single socket
starts to cause a significant overhead. In this case the incoming traffic is
distributed over multiple sockets and the contention is reduced. Note that
doing this can easily increase the CPU usage by making more threads work a
little bit.
If the number of shards is higher than the number of available threads, it
will automatically be trimmed to the number of threads. A special value
"by-thread" will automatically assign one shard per thread.
This function's purpose will be to duplicate a listener in INIT state.
This will be used to ease declaration of listeners spanning multiple
groups, which will thus require multiple FDs hence multiple receivers.
With groups at some point we'll have to have distinct masks/groups in the
receiver and the bind_conf, because a single bind_conf might require to
instantiate multiple receivers (one per group).
Let's split the thread mask and group to have one for the bind_conf and
another one for the receiver while it remains easy to do. This will later
allow to use different storage for the bind_conf if needed (e.g. support
multiple groups).
In file included from include/haproxy/jwt.h:25:
include/haproxy/jwt-t.h:66:2: error: unknown type name 'EVP_PKEY'
EVP_PKEY *pkey;
^
1 error generated.
Fix this compilation issue by inserting openssl-compat.h in jwt-t.h
This new converter takes a JSON Web Token, an algorithm (among the ones
specified for JWS tokens in RFC 7518) and a public key or a secret, and
it returns a verdict about the signature contained in the token. It does
not simply return a boolean because some specific error cases cas be
specified by returning an integer instead, such as unmanaged algorithms
or invalid tokens. This enables to distinguich malformed tokens from
tampered ones, that would be valid format-wise but would have a bad
signature.
This converter does not perform a full JWT validation as decribed in
section 7.2 of RFC 7519. For instance it does not ensure that the header
and payload parts of the token are completely valid JSON objects because
it would need a complete JSON parser. It only focuses on the signature
and checks that it matches the token's contents.
A JWT signed with the RSXXX or ESXXX algorithm (RSA or ECDSA) requires a
public certificate to be verified and to ensure it is valid. Those
certificates must not be read on disk at runtime so we need a caching
mechanism into which those certificates will be loaded during init.
This is done through a dedicated ebtree that is filled during
configuration parsing. The path to the public certificates will need to
be explicitely mentioned in the configuration so that certificates can
be loaded as early as possible.
This tree is different from the ckch one because ckch entries are much
bigger than the public certificates used in JWT validation process.
This helper function splits a JWT under Compact Serialization format
(dot-separated base64-url encoded strings) into its different sub
strings. Since we do not want to manage more than JWS for now, which can
only have at most three subparts, any JWT that has strictly more than
two dots is considered invalid.
The full list of possible algorithms used to create a JWS signature is
defined in section 3.1 of RFC7518. This patch adds a helper function
that converts the "alg" strings into an enum member.
This fetch can be used to retrieve the data contained in an HTTP
Authorization header when the Bearer scheme is used. This is used when
transmitting JSON Web Tokens for instance.
On receiving CONNECTION_CLOSE frame, the mux is flagged for immediate
connection close. A stream is closed even if there is data not ACKed
left if CONNECTION_CLOSE has been received.
The mux tx buffers have been rewritten with buffers attached to qcs
instances. qc_buf_available and qc_get_buf functions are updated to
manipulates qcs. All occurences of the unused qcc ring buffer are
removed to ease the code maintenance.
Defer the shutting of a qcs if there is still data in its tx buffers. In
this case, the conn_stream is closed but the qcs is kept with a new flag
QC_SF_DETACH.
On ACK reception, the xprt wake up the shut_tl tasklet if the stream is
flagged with QC_SF_DETACH. This tasklet is responsible to free the qcs
and possibly the qcc when all bidirectional streams are removed.
Remove the tx mux ring buffers in qcs, which should be in the qcc. For
the moment, use a simple architecture with 2 simple tx buffers in the
qcs.
The first buffer is used by the h3 layer to prepare the data. The mux
send operation transfer these into the 2nd buffer named xprt_buf. This
buffer is only freed when an ACK has been received.
This architecture is functional but not optimal for two reasons :
- it won't limit the buffer usage by connection
- each transfer on a new stream requires an allocation
This new ssllib_name_startswith precondition check can be used to
distinguish application linked with OpenSSL from the ones linked with
other SSL libraries (LibreSSL or BoringSSL namely). This check takes a
string as input and returns 1 when the SSL library's name starts with
the given string. It is based on the OpenSSL_version function which
returns the same output as the "openssl version" command.
These ones are passed on rule creation for the sole purpose of being
reported in "show sess", which is not done yet. For now the entries
are allocated upon rule creation and freed in free_act_rules().
Rules are currently allocated using calloc() by their caller, which does
not make it very convenient to pass more information such as the file
name and line number.
This patch introduces new_act_rule() which performs the malloc() and
already takes in argument the ruleset (ACT_F_*), the file name and the
line number. This saves the caller from having to assing ->from, and
will allow to improve the internal storage with more info.
Rename __GLOBL and __GLOBL1 to __HA_GLOBL and __HA_GLOBL1, as the former are
already defined on FreeBSD.
This should be backported to 2.4, 2.3 and 2.2.
There have been a large number of issues reported with conn_cur
synchronization because the concept is wrong. In an active-passive
setup, pushing the local connections count from the active node to
the passive one will result in the passive node to have a higher
counter than the real number of connections. Due to this, after a
switchover, it will never be able to close enough connections to
go down to zero. The same commonly happens on reloads since the new
process preloads its values from the old process, and if no connection
happens for a key after the value is learned, it is impossible to reset
the previous ones. In active-active setups it's a bit different, as the
number of connections reflects the number on the peer that pushed last.
This patch solves this by marking the "conn_cur" local and preventing
it from being learned from peers. It is still pushed, however, so that
any monitoring system that collects values from the peers will still
see it.
The patch is tiny and trivially backportable. While a change of behavior
in stable branches is never welcome, it remains possible to fix issues
if reports become frequent.
In the configuration sometimes we'll omit a thread group number to designate
a global thread number range, and sometimes we'll mention the group and
designate IDs within that group. The operation is more complex than it
seems due to the need to check for ranges spanning between multiple groups
and determining groups from threads from bit masks and remapping bit masks
between local/global.
This patch adds a function to perform this operation, it takes a group and
mask on input and updates them on output. It's designed to be used by "bind"
lines but will likely be usable at other places if needed.
For situations where specified threads do not exist in the group, we have
the choice in the code between silently fixing the thread set or failing
with a message. For now the better option seems to return an error, but if
it turns out to be an issue we can easily change that in the future. Note
that it should only happen with "x/even" when group x only has one thread.
This extends the "thread" statement of bind lines to support an optional
thread group number. When unspecified (0) it's an absolute thread range,
and when specified it's one relative to the thread group. Masks are still
used so no more than 64 threads may be specified at once, and a single
group is possible. The directive is not used for now.
This is the equivalent of "tid" for ease of access. In the future if we
make th_cfg a pure thread-local array (not a pointer), it may make sense
to move it there.
ha_set_tid() was randomly used either to explicitly set thread 0 or to
set any possibly incomplete thread during boot. Let's replace it with
a pointer to a valid thread or NULL for any thread. This allows us to
check that the designated threads are always valid, and to ignore the
thread 0's mapping when setting it to NULL, and always use group 0 with
it during boot.
The initialization code is also cleaner, as we don't pass ugly casts
of a thread ID to a pointer anymore.
This will be a convenient way to communicate the thread ID and its
local ID in the group, as well as their respective bits when creating
the threads or when only a pointer is given.
This will ease the reporting of the current thread group ID when coming
from the thread itself, especially since it returns the visible ID,
starting at 1.
This takes care of unassigned threads groups and places unassigned
threads there, in a more or less balanced way. Too sparse allocations
may still fail though. For now with a maximum group number fixed to 1
nothing can really fail.
A the "tg" thread-local variable now always points to the current
thread group. It's pre-initializd to the first one during boot and is
set to point to the thread's one by ha_set_tid(). This last one takes
care of checking whether the thread group was assigned or not because
it may be called during boot before threads are initialized.
This registers a mapping of threads to groups by enumerating for each thread
what group it belongs to, and marking the group as assigned. It takes care of
checking for redefinitions, overlaps, and holes. It supports both individual
numbers and ranges. The thread group is referenced from the thread config.
This creates a struct tgroup_info which knows the thread ID of the first
thread in a group, and the number of threads in it. For now there's only
one thread group supported in the configuration, but it may be forced to
other values for development purposes by defining MAX_TGROUPS, and it's
enabled even when threads are disabled and will need to remain accessible
during boot to keep a simple enough internal API.
For the purpose of easing the configurations which do not specify a thread
group, we're starting group numbering at 1 so that thread group 0 can be
"undefined" (i.e. for "bind" lines or when binding tasks).
The goal will be to later move there some global items that must be
made per-group.
We want to make sure that the current thread_info accessed via "ti" will
remain constant, so that we don't accidentally place new variable parts
there and so that the compiler knows that info retrieved from there is
not expected to have changed between two function calls.
Only a few init locations had to be adjusted to use the array and the
rest is unaffected.
The last 3 fields were 3 list heads that are per-thread, and which are:
- the pool's LRU head
- the buffer_wq
- the streams list head
Moving them into thread_ctx completes the removal of dynamic elements
from the struct thread_info. Now all these dynamic elements are packed
together at a single place for a thread.
The TI_FL_STUCK flag is manipulated by the watchdog and scheduler
and describes the apparent life/death of a thread so it changes
all the time and it makes sense to move it to the thread's context
for an active thread.
The "thread_info" name was initially chosen to store all info about
threads but since we now have a separate per-thread context, there is
no point keeping some of its elements in the thread_info struct.
As such, this patch moves prev_cpu_time, prev_mono_time and idle_pct to
thread_ctx, into the thread context, with the scheduler parts. Instead
of accessing them via "ti->" we now access them via "th_ctx->", which
makes more sense as they're totally dynamic, and will be required for
future evolutions. There's no room problem for now, the structure still
has 84 bytes available at the end.
The scheduler contains a lot of stuff that is thread-local and not
exclusively tied to the scheduler. Other parts (namely thread_info)
contain similar thread-local context that ought to be merged with
it but that is even less related to the scheduler. However moving
more data into this structure isn't possible since task.h is high
level and cannot be included everywhere (e.g. activity) without
causing include loops.
In the end, it appears that the task_per_thread represents most of
the per-thread context defined with generic types and should simply
move to tinfo.h so that everyone can use them.
The struct was renamed to thread_ctx and the variable "sched" was
renamed to "th_ctx". "sched" used to be initialized manually from
run_thread_poll_loop(), now it's initialized by ha_set_tid() just
like ti, tid, tid_bit.
The memset() in init_task() was removed in favor of a bss initialization
of the array, so that other subsystems can put their stuff in this array.
Since the tasklet array has TL_CLASSES elements, the TL_* definitions
was moved there as well, but it's not a problem.
The vast majority of the change in this patch is caused by the
renaming of the structures.
We used to remap SI_TKILL to SI_LWP when SI_TKILL was not available
(e.g. FreeBSD) but that's ugly and since we need this only in a single
switch/case block in wdt.c it's even simpler and cleaner to perform the
two tests there, so let's do this.
The watchdog timer had no more reason for being shared with the struct
thread_info since the watchdog is the only user now. Let's remove it
from the struct and move it to a static array in wdt.c. This removes
some ifdefs and the need for the ugly mapping to empty_t that might be
subject to a cast to a long when compared to TIMER_INVALID. Now timer_t
is not known outside of wdt.c and clock.c anymore.
This removes the knowledge of clockid_t from anywhere but clock.c, thus
eliminating a source of includes burden. The unused clock_id field was
removed from thread_info, and the definition setting of clockid_t was
removed from compat.h. The most visible change is that the function
now_cpu_time_thread() now takes the thread number instead of a tinfo
pointer.
The code that deals with timer creation for the WDT was moved to clock.c
and is called with the few relevant arguments. This removes the need for
awareness of clock_id from wdt.c and as such saves us from having to
share it outside. The timer_t is also known only from both ends but not
from the public API so that we don't have to create a fake timer_t
anymore on systems which do not support it (e.g. macos).
This was previously open-coded in run_thread_poll_loop(). Now that
we have clock.c dedicated to such stuff, let's move the code there
so that we don't need to keep such ifdefs nor to depend on the
clock_id.
Instead of fiddling with before_poll and after_poll in
activity_count_runtime(), the function is now called by
clock_entering_poll() which passes it the number of microseconds
spent working. This allows to remove all calls to
activity_count_runtime() from the pollers.
The entering_poll/leaving_poll/measure_idle functions that were hard
to classify and used to move to various locations have now been placed
into clock.c since it's precisely about time-keeping. The functions
were renamed to clock_*. The samp_time and idle_time values are now
static since there is no reason for them to be read from outside.
There is currently a problem related to time keeping. We're mixing
the functions to perform calculations with the os-dependent code
needed to retrieve and adjust the local time.
This patch extracts from time.{c,h} the parts that are solely dedicated
to time keeping. These are the "now" or "before_poll" variables for
example, as well as the various now_*() functions that make use of
gettimeofday() and clock_gettime() to retrieve the current time.
The "tv_*" functions moved there were also more appropriately renamed
to "clock_*".
Other parts used to compute stolen time are in other files, they will
have to be picked next.
It was brough by an unneeded addition of a local variable after a test
in commit f7f53afcf ("BUILD/MEDIUM: tcp: set-mark setting support for
FreeBSD."). No backport needed.
Remove the quic_conn from the receiver connection_ids tree on
quic_conn_free. This fixes a crash due to dangling references in the
tree after a quic connection release.
This operation must be conducted under the listener lock. For this
reason, the quic_conn now contains a reference to its attached listener.
Following include reorganzation, there is some missing include files for
task.h when compiling with DEBUG_TASK :
- activity.h for task_profiling_mask
- time.h for now_mono_time()
This is present since the following commit
d8b325c748
REORG: task: uninline the loop time measurement code
No need to backport this.
These ones are rarely used or only to waste CPU cycles waiting, and are
the last ones requiring system includes in thread.h. Let's uninline them
and move them to thread.c.
This removes the thread identifiers from struct thread_info and moves
them only in static array in thread.c since it's now the only file that
needs to touch it. It's also the only file that needs to include
pthread.h, beyond haproxy.c which needs it to start the poll loop. As
a result, much less system includes are needed and the LoC reduced by
around 3%.
haproxy.c still has to deal with pthread-specific low-level stuff that
is OS-dependent. We should not have to deal with this there, and we do
not need to access pthread anywhere else.
Let's move these 3 functions to thread.c and keep empty inline ones for
when threads are disabled.
It's not needed to inline it at all (one call per loop) and it introduces
dependencies, let's move it to fd.c.
Removing the few remaining includes that came with it further reduced
by ~0.2% the LoC and the build time is now below 6s.
TV_ETERNITY, TV_ETERNITY_MS and MAX_DELAY_MS may be configured and
ought to be in defaults.h so that they can be inherited from everywhere
without including time.h and could also be redefined if neede
(particularly for MAX_DELAY_MS).
It's pointless to inline this, it's called exactly once per poll loop,
and it depends on time.h which is quite deep. Let's move that to task.c
along with sched_report_idle().
The remaining large functions are those allocating/initializing and
occasionally freeing connections, conn_streams and sockaddr. Let's
move them to connection.c. In fact, cs_free() is the only one-liner
but let's move it along with the other ones since a call will be
small compared to the rest of the work done there.
The following inlined functions are particularly large (and probably not
inlined at all by the compiler), and together represent roughly half of
the file, while they're used at most once per connection. They were moved
to connection.c.
conn_upgrade_mux_fe, conn_install_mux_fe, conn_install_mux_be,
conn_install_mux_chk, conn_delete_from_tree, conn_init, conn_new,
conn_free
No need to include the full tree management code, type files only
need the definitions. Doing so reduces the whole code size by around
3.6% and the build time is down to just 6s.
ebtree is one piece using a lot of inlines and each tree root or node
definition needed by many of our structures requires to parse and
compile all these includes, which is large and painfully slow. Let's
move the very basic definitions to their own file and include it from
ebtree.h.
The following functions are quite heavy and have no reason to be kept
inlined:
srv_release_conn, srv_lookup_conn, srv_lookup_conn_next,
srv_add_to_idle_list
They were moved to server.c. It's worth noting that they're a bit
at the edge between server and connection and that maybe we could
create an idle-conn file for these in the near future.
We do not really need to have them inlined, and having xxhash.h included
by connection.h results in this 4700-lines file being processed 101 times
over the whole project, which accounts for 13.5% of the total size!
Additionally, half of the functions are only needed from connection.c.
Let's move the functions there and get rid of the painful include.
The build time is now down to 6.2s just due to this.
The hash type stored everywhere is XXH64_hash_t, which annoyingly forces
everyone to include the huge xxhash file. We know it's an uint64_t because
that's its purpose and the type is only made to abstract it on machines
where uint64_t is not availble. Let's switch the type to uint64_t
everywhere and avoid including xxhash from the type file.
Plenty of includes were present there only for struct pointers resulting
in them being used from many other places. The LoC reduced again by more
than 1% by cleaning this.
This one is expensive in code size because it comes with xxhash.h at a
low level of dependency that's inherited at plenty of places, and for
a function does doesn't benefit from inlining and could possibly even
benefit from not being inline given that it's large and called from the
scheduler.
Moving it to activity.c reduces the LoC by 1.2% and the binary size by
~1kB.
This function has no reason for being inlined, it's called from non
critical places (once in pollers), is quite large and comes with
dependencies (time and freq_ctr). Let's move it to acitvity.c. That's
another 0.4% less LoC to build.
These are ticks, not timeval, and they're a cause for plenty of files
including time.h just to access now_ms that's only used with ticks
functions. Let's move them over there.
The idle time calculation stuff was moved to task.h by commit 6dfab112e
("REORG: sched: move idle time calculation from time.h to task.h") but
these two variables that are only maintained by task.{c,h} were still
left in time.{c,h}. They have to move as well.
These two counters were the only ones not in the global struct, while
the SSL freq counters or the req counts are already in it, this forces
stats.c to include ssl_sock just to know about them. Let's move them
over there with their friends. This reduces from 408 to 384 the number
of includes of opensslconf.h.
This one has nothing to do with ssl_sock as it manipulates the struct
server only. Let's move it to server.c and remove unneeded dependencies
on ssl_sock.h. This further reduces by 10% the number of includes of
opensslconf.h and by 0.5% the number of compiled lines.
This one doesn't use anything from an SSL context, it only checks the
type of the transport layer of a connection, thus it belongs to
connection.h. This is particularly visible due to all the ifdefs
around it in various call places.
This is exactly the same as for listeners, servers only include
openssl-compat to provide the SSL_CTX type to use as two pointers to
contexts, and to detect if NPN, ALPN, and cipher suites are supported,
and save up to 5 pointers in the ssl_ctx struct if not supported. This
is pointless, as these ones have all been supported for about a decade,
and including this file comes with a long dependency chain that impacts
lots of other files. The ctx was made a void*.
Now the build time was significantly reduced, from 9.2 to 8.1 seconds,
thanks to opensslconf.h being included "only" 456 times instead of 2424
previously!
The total number of lines of code compiled was reduced by 15%.
Listeners only include openssl-compat to provide the SSL_CTX type to
use as two pointers to contexts, and to detect if NPN, ALPN, and cipher
suites are supported, and save up to 5 pointers in the ssl_bind_conf
struct if not supported. This is pointless, as these ones have all been
supported for about a decade, and including this file comes with a long
dependency chain that impacts lots of other files. The initial_ctx and
default_ctx can perfectly remain void* instead of SSL_CTX*.
These functions have no reason for being inlined, and they require some
includes with long dependencies. Let's move them to listener.c and trim
unused includes in listener.h.
This file includes streams, proxies, Lua just for some definitions of
structures for which we only have a pointer. Let's drop this. That's
responsible for 0.2% of all the lines of code.
The lock-debugging code in thread.h has no reason to be inlined. the
functions are quite fat and perform a lot of operations so there's no
saving keeping them inlined. Worse, most of them are in fact not
inlined, resulting in a significantly bigger executable.
This patch moves all this part from thread.h to thread.c. The functions
are still exported in thread.h of course. This results in ~166kB less
code:
text data bss dec hex filename
3165938 99424 897376 4162738 3f84b2 haproxy-before
2991987 99424 897376 3988787 3cdd33 haproxy-after
In addition the build time with thread debugging enabled has shrunk
from 19.2 to 17.7s thanks to much less code to be parsed in thread.h
that is included virtually everywhere.
pool-os.h relies on a number of includes solely because the
pool_alloc_area() function was inlined, and this only because we want
the normal version to be inlined so that we can track the calling
places for the memory profiler. It's worth noting that it already
does not work at -O0, and that when UAF is enabled we don't care a
dime about profiling.
This patch does two things at once:
- force-inline the functions so that pool_alloc_area() is still
inlined at -O0 to help track malloc() users ;
- uninline the UAF version of these (that rely on mmap/munmap)
and move them to pools.c so that we can remove all unneeded
includes.
Doing so reduces by ~270kB or 0.15% the total build size.
These ones are called from a few places in the code and are only provided
by ebtree.h, which is not normal given that some callers do not even use
ebtree.
channel, stream_interface, appctx, buffer, proxy and htx ones are used
in function arguments and most of them are not defined but were inherited
from intermediary inclues. Let's define them here and drop the unneeded
includes.
Some structures are inherited via intermediary includes (e.g. dns_counters
comes from a long path). Let's define the missing ones and includes vars-t
that is needed in the structure.
We're using variable-to-sample conversion at least 4 times in the code,
two of which are bogus. Let's introduce a generic conversion function
that performs the required checks.
This one only handles integers, contrary to its sibling with the suffix
_str that only handles strings. Let's rename it and uninline it since it
may well be used from outside.
The SSL stuff in struct server takes less than 3% of it and requires
lots of annoying ifdefs in the code just to take care of the cases
where the field is absent. Let's get rid of this and stop including
openssl-compat from server.c to detect NPN and ALPN capabilities.
This reduces the total LoC by another 0.4%.
During httpclient_destroy, add a condition in the BUG_ON which checks
that the client was started before it has ended. A httpclient structure
could have been created without being started.
httpclient_stop_and_destroy() tries to destroy the httpclient structure
if the client was stopped.
In the case the client wasn't stopped, it ask the client to stop itself
and to destroy the httpclient structure itself during the release of the
applet.
That's where that code initially was but it had been moved to
activity_count_runtime() for pure reasons of dependency loops. These
ones are no longer true so we can move that code back to the scheduler
and keep it where the information are updated and checked.
time.h is a horrible place to put activity calculation, it's a
historical mistake because the functions were there. We already have
most of the parts in sched.{c,h} and these ones make an exception in
the middle, forcing time.h to include some thread stuff and to access
the before/after_poll and idle_pct values.
Let's move these 3 functions to task.h with the other ones. They were
prefixed with "sched_" instead of the historical "tv_" which already
made no sense anymore.
I don't know why I inlined this one, this makes no sense given that it's
only used for stats, and it starts a circular dependency on tinfo.h which
can be problematic in the future. In addition, all the stuff related to
idle time calculation should be with the rest of the scheduler, which
currently is in task.{c,h}, so let's move it there.
We'll need to improve the API to pass other arguments in the future, so
let's start to adapt better to the current use cases. task_new() is used:
- 18 times as task_new(tid_bit)
- 18 times as task_new(MAX_THREADS_MASK)
- 2 times with a single bit (in a loop)
- 1 in the debug code that uses a mask
This patch provides 3 new functions to achieve this:
- task_new_here() to create a task on the calling thread
- task_new_anywhere() to create a task to be run anywhere
- task_new_on() to create a task to run on a specific thread
The change is trivial and will allow us to later concentrate the
required adaptations to these 3 functions only. It's still possible
to call task_new() if needed but a comment was added to encourage the
use of the new ones instead. The debug code was not changed and still
uses it.
Work lists were a mechanism introduced in 1.8 to asynchronously delegate
some work to be performed on another thread via a dedicated task.
The only user was the listeners, to deal with the queue. Nowadays
the tasklets have made this much more convenient, and have replaced
work_lists in the listeners. It seems there will be no valid use case
of work lists anymore, so better get rid of them entirely and keep the
scheduler code cleaner.
__task_queue() must absolutely not be called with TICK_ETERNITY or it
will place a never-expiring node upfront in the timers queue, preventing
any timer from expiring until the process is restarted. Code was found
to cause this using "task_schedule(task, now_ms)" which does this one
millisecond every 49.7 days, so let's add a condition against this. It
must never trigger since any process susceptible to trigger it would
already accumulate tasks until it dies.
An extra test was added in wake_expired_tasks() to detect tasks whose
timeout would have been changed after being queued.
An improvement over this could be in the future to use a non-scalar
type (union/struct) for expiration dates so as to avoid the risk of
using them directly like this. But now_ms is already such a valid
time and this specific construct would still not be caught.
This could even be backported to stable versions to help detect other
occurrences if any.
The ssl_bc_hsk_err sample fetch will need to raise more errors than only
handshake related ones hence its renaming to a more generic ssl_bc_err.
This patch is required because some handshake failures that should have
been caught by this fetch (verify error on the server side for instance)
were missed. This is caused by a change in TLS1.3 in which the
'Finished' state on the client is reached before its certificate is sent
(and verified) on the server side (see the "Protocol Overview" part of
RFC 8446).
This means that the SSL_do_handshake call is finished long before the
server can verify and potentially reject the client certificate.
The ssl_bc_hsk_err will then need to be expanded to catch other types of
errors.
This change is also applied to the frontend fetches (ssl_fc_hsk_err
becomes ssl_fc_err) and to their string counterparts.
In case of a connection error happening after the SSL handshake is
completed, the error code stored in the connection structure would not
always be set, hence having some connection failures being described as
successful in the fc_conn_err or bc_conn_err sample fetches.
The most common case in which it could happen is when the SSL server
rejects the client's certificate. The SSL_do_handshake call on the
client side would be sucessful because the client effectively sent its
client hello and certificate information to the server, but the next
call to SSL_read on the client side would raise an SSL_ERROR_SSL code
(through the SSL_get_error function) which is decribed in OpenSSL
documentation as a non-recoverable and fatal SSL error.
This patch ensures that in such a case, the connection's error code is
set to a special CO_ERR_SSL_FATAL value.
There's no reason CONFIG_HAP_POOLS and its opposite are located into
pools-t.h, it forces those that depend on them to inlcude the file.
Other similar options are normally dealt with in defaults.h, which is
part of the default API, so let's do that.
According to the RFC7230, "chunked" encoding must not be applied more than
once to a message body. To handle this case, h1_parse_xfer_enc_header() is
now responsible to fail when a parsing error is found. It also fails if the
"chunked" encoding is not the last one for a request.
To help the parsing, two H1 parser flags have been added: H1_MF_TE_CHUNKED
and H1_MF_TE_OTHER. These flags are set, respectively, when "chunked"
encoding and any other encoding are found. H1_MF_CHNK flag is used when
"chunked" encoding is the last one.
This commit provides an hlua_httpclient object which is a bridge between
the httpclient and the lua API.
The HTTPClient is callable in lua this way:
local httpclient = core.httpclient()
local response = httpclient:get("http://127.0.0.1:9000/?s=9999")
core.Debug("Status: ".. res.status .. ", Reason : " .. res.reason .. ", Len:" .. string.len(res.body) .. "\n")
The resulting response object will provide a "status" field which
contains the status code, a "reason" string which contains the reason
string, and a "body" field which contains the response body.
The implementation uses the httpclient callback to wake up the lua task
which yield each time it pushes some data. The httpclient works in the
same thread as the lua task.
The transient flag CO_RFL_BUF_NOT_STUCK should now be set when the mux's
rcv_buf() function is called, in si_cs_recv(), to be sure the mux is able to
perform some optimisation during data copy. This flag is set when we are
sure the channel buffer is not stuck. Concretely, it happens when there are
data scheduled to be sent.
It is not a fix and this flag is not used for now. But it makes sense to have
this info to be sure to be able to do some optimisations if necessary.
This patch is related to the issue #1362. It may be backported to 2.4 to
ease future backports.
HTX_FL_FRAGMENTED flag is now set on an HTX message when it is
fragmented. It happens when an HTX block is removed in the middle of the
message and flagged as unused. HTX_FL_FRAGMENTED flag is removed when all
data are removed from the message or when the message is defragmented.
Note that some optimisations are still possible because the flag can be
avoided in other situations. For instance when the last header of a bodyless
message is removed.
If the stream-interface is waiting for more buffer room to store incoming
data, it is important at the stream level to stop to wait for more data to
continue. Thanks to the previous patch ("BUG/MEDIUM: stream-int: Notify
stream that the mux wants more room to xfer data"), the stream is woken up
when this happens. In this patch, we take care to interrupt the
corresponding tcp-content ruleset or to stop waiting for the HTTP message
payload.
To ease detection of the state, si_rx_blocked_room() helper function has
been added. It returns non-zero if the stream interface's Rx path is blocked
because of lack of room in the input buffer.
This patch is part of a series related to the issue #1362. It should be
backported as ar as 2.0, probably with some adaptations. So be careful
during backports.
When the mux failed to transfer data to the upper layer because of a lack of
room, it is important to wake the stream up to let it handle this
event. Otherwise, if the stream is waiting for more data, both the stream
and the mux reamin blocked waiting for each other.
When this happens, the mux set the CS_FL_WANT_ROOM flag on the
conn-stream. Thus, in si_cs_recv() we are able to detect this event. Today,
the stream-interface is blocked. But, it is not enough to wake the stream
up. To fix the bug, CF_READ_PARTIAL flag is extended to also handle cases
where a read exception occurred. This flag should idealy be renamed. But for
now, it is good enough. By setting this flag, we are sure the stream will be
woken up.
This patch is part of a series related to the issue #1362. It should be
backported as far as 2.0, probably with some adaptations. So be careful
during backports.
When a message is parsed and copied into the channel buffer, in
h1_process_demux(), more space is requested if some pending data remain
after the parsing while the channel buffer is not empty. To do so,
CS_FL_WANT_ROOM flag is set. It means the H1 parser needs more space in the
channel buffer to continue. In the stream-interface, when this flag is set,
the SI is considered as blocked on the RX path. It is only unblocked when
some data are sent.
However, it is not accurrate because the parsing may be stopped because
there is not enough data to continue. For instance in the middle of a chunk
size. In this case, some data may have been already copied but the parser is
blocked because it must receive more data to continue. If the calling SI is
blocked on RX at this stage when the stream is waiting for the payload
(because http-buffer-request is set for instance), the stream remains stuck
infinitely.
To fix the bug, we must request more space to the app layer only when it is
not possible to copied more data. Actually, this happens when data remain in
the input buffer while the H1 parser is in states MSG_DATA or MSG_TUNNEL, or
when we are unable to copy headers or trailers into a non-empty buffer.
The first condition is quite easy to handle. The second one requires an API
refactoring. h1_parse_msg_hdrs() and h1_parse_msg_tlrs() fnuctions have been
updated. Now it is possible to know when we need more space in the buffer to
copy headers or trailers (-2 is returned). In the H1 mux, a new H1S flag
(H1S_F_RX_CONGESTED) is used to track this state inside h1_process_demux().
This patch is part of a series related to the issue #1362. It should be
backported as far as 2.0, probably with some adaptations. So be careful
during backports.
During the packet loss detection we must treat the paquet number
in this order Initial -> Handshake -> O1RTT. This was not the case
due to the chosen order to implement the array of packet number space
which was there before the packet loss detection implementation.
The STREAM data to send coming from the upper layer must be stored until
having being acked by the peer. To do so, we store them in buffer structs,
one by stream (see qcs.tx.buf). Each time a STREAM is built by quic_push_frame(),
its offset must match the offset of the first byte added to the buffer (modulo
the size of the buffer) by the frame. As they are not always acknowledged in
order, they may be stored in eb_trees ordered by their offset to be sure
to sequentially delete the STREAM data from their buffer, in the order they
have been added to it.
This function does exactly the same thing as b_xfer() which transfers
data from a struct buffer to another one but without zero copy when
the destination buffer is empty. This is at least useful to transfer
h3 data to the QUIC mux from buffer with garbage medata which have
been used to build h3 frames without too much memcopy()/memmove().
The peer transport parameter values were not initialized with
the default ones (when absent), especially the
"active_connection_id_limit" parameter with 2 as default value
when absent from received remote transport parameters. This
had as side effect to send too much NEW_CONNECTION_ID frames.
This was the case for curl which does not announce any
"active_connection_id_limit" parameter.
Also rename ->idle_timeout to ->max_idle_timeout to reflect the RFC9000.
These salts are used to derive initial secrets to decrypt the first Initial packet.
We support draft-29 and v1 QUIC version initial salts.
Add parameters to our QUIC-TLS API functions used to derive these secret for
these salts.
Make our xprt_quic use the correct initial salt upon QUIC version field found in
the first paquet. Useful to support connections with curl which use draft-29
QUIC version.
Move the "ACK required" bit from the packet number space to the connection level.
Force the "ACK required" option when acknowlegding Handshake or Initial packet.
A client may send three packets with a different encryption level for each. So,
this patch modifies qc_treat_rx_pkts() to consider two encryption level passed
as parameters, in place of only one.
Make qc_conn_io_cb() restart its process after the handshake has succeeded
so that to process any Application level packets which have already been received
in the same datagram as the last CRYPTO frames in Handshake packets.
Make qc_prep_hdshk_pkts() and qui_conn_io_cb() handle the case
where we enter them with QUIC_HS_ST_COMPLETE or QUIC_HS_ST_CONFIRMED
as connection state with QUIC_TLS_ENC_LEVEL_APP and QUIC_TLS_ENC_LEVEL_NONE
to consider to prepare packets.
quic_get_tls_enc_levels() is modified to return QUIC_TLS_ENC_LEVEL_APP
and QUIC_TLS_ENC_LEVEL_NONE as levels to consider when coalescing
packets in the same datagram.
qc_build_pkt() has recently been modified to support any type of
supported frame at any encryption level (assuming that an encryption level does
not support any type of frame) but quic_tls_level_pkt_type()
prevented it from building application level packet type because it was written
only for the handshake.
This patch simply adds the remaining encryption level QUIC_TLS_ENC_LEVEL_APP
which must be supported by quic_tls_level_pkt_type().
This should be used by the function which build packets to prevent
it from failing. This is important when the packet numbers are consumed
by several threads. The packet number is used to build and encrypt packets
and must be incremented only and only if the packet it refers to has been
successfully built.
These structures are similar. quic_tx_frm was there to try to reduce the
size of such objects which embed a union for all the QUIC frames.
Furtheremore this patch fixes the issue where quic_tx_frm objects were freed
from the pool for quic_frame.
Make quic_rx_packet_ref(inc|dec)() functions be thread safe.
Make use of ->rx.crypto.frms_rwlock RW lock when manipulating RX frames
from qc_treat_rx_crypto_frms().
Modify atomically several variables attached to RX part of quic_enc_level struct.
->rx.crypto member of quic_enc_level struct was not initialized as
this was done for all other members of this structure. This patch
fixes this.
Also adds a RW lock for the frame of this member.
Add two functions to encrement or decrement a referenc counter
attached to TX packet structure (struct quic_tx_packet). The packet are freed
when their counters reach the null value.
We use only ring buffers (struct qring) to prepare and send QUIC datagrams.
We can safely remove the old buffering implementation which was not thread safe.
We modify the functions responsible of building packets to put these latters
in ring buffers (qc_build_hdshk_pkt() during the handshake step, and
qc_build_phdshk_apkt() during the post-handshake step). These functions
remove a ring buffer from its list to build as much as possible datagrams.
Eache datagram is prepended of two field: the datagram length and the
first packet in the datagram. We chain the packets belonging to the same datagram
in a singly linked list to reach them from the first one: indeed we must
modify some members of each packet when we really send them from send_ppkts().
This function is also modified to retrieved the datagram from ring buffers.
We initialize the pointer to the listener TX ring buffer list.
Note that this is not done for QUIC clients as we do not fully support them:
we only have to allocate the list and attach it to server struct I guess.
We allocate an array of QUIC ring buffer, one by thread, and arranges them in a
MT_LIST. Everything is allocated or nothing: we do not want to usse an incomplete
array of ring buffers to ensure that each thread may safely acquire one of these
buffers.
This implementation is inspired from Linux kernel circular buffer implementation
(see include/linux/circ-buf.h). Such buffers may be used at the same time both
by writer and reader (lock-free).
Modify the I/O dgram handler principal function used to parse QUIC packets
be thread safe. Its role is at least to create new incoming connections
add to two trees protected by the same RW lock. The packets are for now on
fully parsed before possibly creating new connections.
Move the connection state from quic_conn_ctx struct to quic_conn struct which
is the structure which is used to store the QUIC connection part information.
This structure is initialized by the I/O dgram handler for each new connection
to QUIC listeners. This is needed for the multithread support so that to not
to have to depend on the connection context potentially initialized by another
thread.
We must protect from concurrent the tree which stores the QUIC packets received
by the dgram I/O handler, these packets being also parsed by the xprt task.
Make depends qc_new_isecs() only on quic_conn struct initialization only (no more
dependency on connection struct initialization) to be able to run it as soon as
the quic_conn struct is initialized (from the I/O handler) before running ->accept()
quic proto callback.
Move the QUIC conn (struct quic_conn) initialization from quic_sock_accept_conn()
to qc_lstnr_pkt_rcv() as this is done for the server part.
Move the timer initialization to ->start xprt callback to ensure the connection
context is done : it is initialized by the ->accept callback which may be run
by another thread than the one for the I/O handler which also run ->start.
The name the maximum packet size transport parameter was ambiguous and replaced
by maximum UDP payload size. Our code would be also ambiguous if it does not
reflect this change.
This function calls quic_mux_transport_params_update() to update the related
streams transport parameter of the mux. It is there only so that not to have
to include mux_quic.h to update these parameters.
Add a new structure to store enough information about STREAM frames which
must be stored before being delivered to the application layer, for any
reason.
The flow control at stream level is organized by types (client bidi, server bidi,
client uni, server uni). Adds at least callback to retrieve the number
of available streams by direction.
This file has been derived from mux_h2.c removing all h2 parts. At
QUIC mux layer, there must not be any reference to http. This will be the
responsability of the application layer (h3) to open streams handled by the mux.
We move ->params transport parameters to ->rx.params. They are the
transport parameters which will be sent to the peer, and used for
the endpoint flow control. So, they will be used to received packets
from the peer (RX part).
Also move ->rx_tps transport parameters to ->tx.params. They are the
transport parameter which are sent by the peer, and used to respect
its flow control limits. So, they will be used when sending packets
to the peer (TX part).
appctx_new() is exclusively called with tid_bit and it only uses the
mask to pass it to the accompanying task. There is no point requiring
the caller to know about a mask there, nor is there any point in
creating an applet outside of the context of its own thread anyway.
Let's drop this and pass tid_bit to task_new() directly.
A new warning is reported by gcc11 when using a pointer to uninitialized
memory block for a function with a const pointer argument. The warning
is triggered for istalloc, used by http_client.c / proxy.c / tcpcheck.c.
This warning is reported because the uninitialized memory block
allocated by malloc should not be passed to a const argument as in ist2.
See https://gcc.gnu.org/onlinedocs/gcc-11.1.0/gcc/Warning-Options.html#index-Wmaybe-uninitialized
This should be backported up to 2.2.
Ilya reported in issue #1391 a build warning on Fedora about mallinfo()
being deprecated in favor of mallinfo2() since glibc-2.33. Let's add
support for it. This should be backported where the following commit is
also backported: 157e39303 ("MINOR: pools: automatically disable
malloc_trim() with external allocators").
"f(void)" is the correct and preferred form for a function taking no
argument, while some places use the older "f()". These were reported
by clang's -Wmissing-prototypes, for example:
src/cpuset.c:111:5: warning: no previous prototype for function 'ha_cpuset_size' [-Wmissing-prototypes]
int ha_cpuset_size()
include/haproxy/cpuset.h:42:5: note: this declaration is not a prototype; add 'void' to make it a prototype for a zero-parameter function
int ha_cpuset_size();
^
void
This aggregate patch fixes this for the following functions:
ha_backtrace_to_stderr(), ha_cpuset_size(), ha_panic(), ha_random64(),
ha_thread_dump_all_to_trash(), get_exec_path(), check_config_validity(),
mworker_child_nb(), mworker_cli_proxy_(create|stop)(),
mworker_cleantasks(), mworker_cleanlisteners(), mworker_ext_launch_all(),
mworker_reload(), mworker_(env|proc_list)_to_(proc_list|env)(),
mworker_(un|)block_signals(), proxy_adjust_all_maxconn(),
proxy_destroy_all_defaults(), get_tainted(),
pool_total_(allocated|used)(), thread_isolate(_full|)(),
thread(_sync|)_release(), thread_harmless_till_end(),
thread_cpu_mask_forced(), dequeue_all_listeners(), next_timer_expiry(),
wake_expired_tasks(), process_runnable_tasks(), init_acl(),
init_buffer(), (de|)init_log_buffers(), (de|)init_pollers(),
fork_poller(), pool_destroy_all(), pool_evict_from_local_caches(),
pool_total_failures(), dump_pools_to_trash(), cfg_run_diagnostics(),
tv_init_(process|thread)_date(), __signal_process_queue(),
deinit_signals(), haproxy_unblock_signals()
-Wundef triggered on a MIPS-based musl build on __WORDSIZE that's used
in ultoa_o() and some Lua initialization. The former will fail to convert
integers larger to 1 billion to proper string in this case. Let's make
sure this macro is defined and fall back to values determined from
__SIZEOF_LONG__ otherwise. A cleaner long-term approach would consist
in removing all remaining occurrences of this macro.
This can be backported to all versions.
Building with an old musl-based toolchain reported this warning:
include/haproxy/thread.h: In function 'ha_thread_relax':
include/haproxy/thread.h:256:5: warning: "_POSIX_PRIORITY_SCHEDULING" is not defined [-Wundef]
#if _POSIX_PRIORITY_SCHEDULING
^
There were indeed two "#if" insteadd of #ifdef" for this macro, let's
fix them.
When the header list is added, after the message parsing, headers with no
value are now ignored. It is not the same than headers with empty value
fields. Only headers with a NULL pointer as value are skipped. This only
happens if the header value is removed during the message
parsing. Concretly, such headers are now ignored when htx_add_all_headers()
is called. However, htx_add_header() is not affected by this change.
Symetrically, the same is true for trailers. It may be backported to 2.4
because of the previous fix ("BUG/MEDIUM: mux-h1: Remove "Upgrade:" header
for requests with payload").
There's no point taking the variables locks for sess/txn/req/res
contexts since these ones always run inside the same thread anyway.
This patch conditions the lock on the variable's scope to avoid
flushing cache lines when not needed.
This showed an improvement of ~5% on a 16-thread machine with 12
variables.
The global table of known variables names can only grow and was designed
for static names that are registered at boot. Nowadays it's possible to
set dynamic variable names from Lua or from the CLI, which causes a real
problem that was partially addressed in 2.2 with commit 4e172c93f
("MEDIUM: lua: Add `ifexist` parameter to `set_var`"). Please see github
issue #624 for more context.
This patch simplifies all this by removing the need for a central
registry of known names, and storing 64-bit hashes instead. This is
highly sufficient given the low number of variables in each context.
The hash is calculated using XXH64() which is bijective over the 64-bit
space thus is guaranteed collision-free for 1..8 chars. Above that the
risk remains around 1/2^64 per extra 8 chars so in practice this is
highly sufficient for our usage. A random seed is used at boot to seed
the hash so that it's not attackable from Lua for example.
There's one particular nit though. The "ifexist" hack mentioned above
is now limited to variables of scope "proc" only, and will only match
variables that were already created or declared, but will now verify
the scope as well. This may affect some bogus Lua scripts and SPOE
agents which used to accidentally work because a similarly named
variable used to exist in a different scope. These ones may need to be
fixed to comply with the doc.
Now we can sum up the situation as this one:
- ephemeral variables (scopes sess, txn, req, res) will always be
usable, regardless of any prior declaration. This effectively
addresses the most problematic change from the commit above that
in order to work well could have required some script auditing ;
- process-wide variables (scope proc) that are mentioned in the
configuration, referenced in a "register-var-names" SPOE directive,
or created via "set-var" in the global section or the CLI, are
permanent and will always accept to be set, with or without the
"ifexist" restriction (SPOE uses this internally as well).
- process-wide variables (scope proc) that are only created via a
set-var() tcp/http action, via Lua's set_var() calls, or via an
SPOE with the "force-set-var" directive), will not be permanent
but will always accept to be replaced once they are created, even
if "ifexist" is present
- process-wide variables (scope proc) that do not exist will only
support being created via the set-var() tcp/http action, Lua's
set_var() calls without "ifexist", or an SPOE declared with
"force-set-var".
This means that non-proc variables do not care about "ifexist" nor
prior declaration, and that using "ifexist" should most often be
reliable in Lua and that SPOE should most often work without any
prior declaration. It may be doable to turn "ifexist" to 1 by default
in Lua to further ease the transition. Note: regtests were adjusted.
Cc: Tim Dsterhus <tim@bastelstu.be>
We certainly do not want that a permanent variable (one that is listed
in the configuration) be erased by accident by an "unset-var" action.
Let's make sure these ones are only reset to an empty sample, like at
the moment of their initial registration. One trick is that the same
function is used to purge the memory at the end and to delete, so we
need to add an extra "force" argument to make the choice.
In order to continue to honor the ifexist Lua option and prevent rogue
SPOA agents from creating too many variables, we'll need to keep the
ability to mark certain proc.* variables as permanent when they're
known from the config file.
Let's add a flag there for this. It's added to the variable when the
variable is created with this flag set by the caller.
Another approach could have been to use a distinct list or distinct
scope but that sounds complicated and bug-prone.
Passing this flag to var_set() will result in the variable to only be
created if it did not exist, otherwise nothing is done (it's not even
updated). This will be used for pre-registering names.
When setting variables, there are currently two variants, one which will
always create the variable, and another one, "ifexist", which will only
create or update a variable if a similarly named variable in any scope
already existed before.
The goal was to limit the risk of injecting random names in the proc
scope, but it was achieved by making use of the somewhat limited name
indexing model, which explains the scope-agnostic restriction.
With this change, we're moving the check downwards in the chain, at the
variable level, and only variables under the scope "proc" will be subject
to the restriction. A new set of VF_* flags was added to adjust how
variables are set, and VF_UPDATEONLY is used to mention this restriction.
In this exact state of affairs, this is not completely exact, as if a
similar name was not known in any scope, the variable will continue to
be rejected like before, but this will change soon.
The vars_init() name is particularly confusing as it does not initialize
the variables code but the head of a list of variables passed in
arguments. And we'll soon need to have proper initialization code, so
let's rename it now.
In ticket #1348 some users expressed some concerns regarding the removal
of the "grace" directive from the proxies. Their use case very closely
mimmicks the original intent of the grace keyword, which is, let haproxy
accept traffic for some time when stopping, while indicating an external
LB that it's stopping.
This is implemented here by starting a task whose expiration triggers
the soft-stop for real. The global "stopping" variable is immediately
set however. For example, this below will be sufficient to instantly
notify an external check on port 9999 that the service is going down,
while other services remain active for 10s:
global
grace 10s
frontend ext-check
bind :9999
monitor-uri /ext-check
monitor fail if { stopping }
Ori Hollander of JFrog Security reported that htx_add_header() and
htx_add_trailer() were missing a length check on the header name. While
this does not allow to overwrite any memory area, it results in bits of
the header name length to slip into the header value length and may
result in forging certain header names on the input. The sad thing here
is that a FIXME comment was present suggesting to add the required length
checks :-(
The injected headers are visible to the HTTP internals and to the config
rules, so haproxy will generally stay synchronized with the server. But
there is one exception which is the content-length header field, because
it is already deduplicated on the input, but before being indexed. As
such, injecting a content-length header after the deduplication stage
may be abused to present a different, shorter one on the other side and
help build a request smuggling attack, or even maybe a response splitting
attack. CVE-2021-40346 was assigned to this problem.
As a mitigation measure, it is sufficient to verify that no more than
one such header is present in any message, which is normally the case
thanks to the duplicate checks:
http-request deny if { req.hdr_cnt(content-length) gt 1 }
http-response deny if { res.hdr_cnt(content-length) gt 1 }
This must be backported to all HTX-enabled versions, hence as far as 2.0.
In 2.3 and earlier, the functions are in src/htx.c instead.
Many thanks to Ori for his work and his responsible report!
Since commit "BUG/MINOR: config: reject configs using HTTP with bufsize
>= 256 MB" we are now sure that it's not possible anymore to have an HTX
block of a size 256 MB or more, even after concatenation thanks to the
tests for len >= htx_free_data_space(). Let's remove these now obsolete
comments.
A BUG_ON() was added in htx_add_blk() to track any such exception if
the conditions would change later, to complete the one that is performed
on the start address that must remain within the buffer.
In preparation for support default values when fetching variables, we
need to update the internal API to pass an extra argument to functions
vars_get_by_{name,desc} to provide an optional default value. This
patch does this and always passes NULL in this argument. var_to_smp()
was extended to fall back to this value when available.
The set-var() action is convenient because it preserves the input type
but it's a pain to deal with when trying to concatenate values. The
most recurring example is when it's needed to build a variable composed
of the source address and the source port. Usually it ends up like this:
tcp-request session set-var(sess.port) src_port
tcp-request session set-var(sess.addr) src,concat(":",sess.port)
This is even worse when trying to aggregate multiple fields from stick-table
data for example. Due to this a lot of users instead abuse headers from HTTP
rules:
http-request set-header(x-addr) %[src]:%[src_port]
But this requires some careful cleanups to make sure they won't leak, and
it's significantly more expensive to deal with. And generally speaking it's
not clean. Plus it must be performed for each and every request, which is
expensive for this common case of ip+port that doesn't change for the whole
session.
This patch addresses this limitation by implementing a new "set-var-fmt"
action which performs the same work as "set-var" but takes a format string
in argument instead of an expression. This way it becomes pretty simple to
just write:
tcp-request session set-var-fmt(sess.addr) %[src]:%[src_port]
It is usable in all rulesets that already support the "set-var" action.
It is not yet implemented for the global "set-var" directive (which already
takes a string) and the CLI's "set var" command, which would definitely
benefit from it but currently uses its own parser and engine, thus it
must be reworked.
The doc and regtests were updated.
For a long time we couldn't have arguments in expressions used in
tcp-request, tcp-response etc rules. But now due to the variables
it's possible, and their context in case of failure to resolve an
argument (e.g. backend name not found) is not properly reported
because there is no arg context values in ARGC_* to report them.
Let's add a number of missing ones for tcp-request {connection,
session,content}, tcp-response content, tcp-check, the config
parser (for "set-var" in the global section) and the CLI parser
(for "set-var" on the CLI).
Sometimes it is convenient to remap large sets of URIs to new ones (e.g.
after a site migration for example). This can be achieved using
"http-request redirect" combined with maps, but one difficulty there is
that non-matching entries will return an empty response. In order to
avoid this, duplicating the operation as an ACL condition ending in
"-m found" is possible but it becomes complex and error-prone while it's
known that an empty URL is not valid in a location header.
This patch addresses this by improving the redirect rules to be able to
simply ignore the rule and skip to the next one if the result of the
evaluation of the "location" expression is empty. However in order not
to break existing setups, it requires a new "ignore-empty" keyword.
There used to be an ACT_FLAG_FINAL on redirect rules that's used during
the parsing to emit a warning if followed by another rule, so here we
only set it if the option is not there. The http_apply_redirect_rule()
function now returns a 3rd value to mention that it did nothing and
that this was not an error, so that callers can just ignore the rule.
The regular "redirect" rules were not modified however since this does
not apply there.
The map_redirect VTC was completed with such a test and updated to 2.5
and an example was added into the documentation.
The locking in the dequeuing process was significantly improved by commit
49667c14b ("MEDIUM: queue: take the proxy lock only during the px queue
accesses") in that it tries hard to limit the time during which the
proxy's queue lock is held to the strict minimum. Unfortunately it's not
enough anymore, because we take up the task and manipulate a few pendconn
elements after releasing the proxy's lock (while we're under the server's
lock) but the task will not necessarily hold the server lock since it may
not have successfully found one (e.g. timeout in the backend queue). As
such, stream_free() calling pendconn_free() may release the pendconn
immediately after the proxy's lock is released while the other thread
currently proceeding with the dequeuing tries to wake up the owner's
task and dies in task_wakeup().
One solution consists in releasing le proxy's lock later. But tests have
shown that we'd have to sacrifice a significant share of the performance
gained with the patch above (roughly a 20% loss).
This patch takes another approach. It adds a "del_lock" to each pendconn
struct, that allows to keep it referenced while the proxy's lock is being
released. It's mostly a serialization lock like a refcount, just to maintain
the pendconn alive till the task_wakeup() call is complete. This way we can
continue to release the proxy's lock early while keeping this one. It had
to be added to the few points where we're about to free a pendconn, namely
in pendconn_dequeue() and pendconn_unlink(). This way we continue to
release the proxy's lock very early and there is no performance degradation.
This lock may only be held under the queue's lock to prevent lock
inversion.
No backport is needed since the patch above was merged in 2.5-dev only.
This option can be used to define a specific log format that will be
used in case of error, timeout, connection failure on a frontend... It
will be used for any log line concerned by the log-separate-errors
option. It will also replace the format of specific error messages
decribed in section 8.2.6.
If no "error-log-format" is defined, the legacy error messages are still
emitted and the other error logs keep using the regular log-format.
Other build warnings were emitted on LIBRESSL_VERSION_NUMBER with -Wundef
under openssl < 1.1. Related to GH issue #1369. Seems like some of them
could be simplified a little bit.
Openssl-compat emits a warning for the test on LIBRESSL_VERSION that might
be underfined, if built with -Wundef. The fix is easy, let's do it. Related
to GH issue #1369.
As reported in GH issue #1369, there is a single case of #if with a
possibly undefined value in defaults.h which is on MAXHOSTNAMELEN. Let's
turn it to a #ifdef.
The code used to rely on BITS_PER_LONG to decide on the most efficient
way to perform a 64-bit shift, but this macro is not defined (at best
it's __BITS_PER_LONG) and it's likely that it's been like this since
the early implementation of ebtrees designed on i386. Let's remove the
test on this macro and rely on sizeof(long) instead, it also has the
benefit of letting the compiler validate the two branches.
This can be backported to all versions. Thanks to Ezequiel Garcia for
reporting this one in issue #1369.
Before threads were introduced in 1.8, idle_pct used to be a global
variable indicating the overall process idle time. Threads made it
thread-local, meaning that its reporting in the stats made little
sense, though this was not easy to spot. In 2.0, the idle_pct variable
moved to the struct thread_info via commit 81036f273 ("MINOR: time:
move the cpu, mono, and idle time to thread_info"). It made it more
obvious that the idle_pct was per thread, and also allowed to more
accurately measure it. But no more effort was made in that direction.
This patch introduces a new report_idle() function that accurately
averages the per-thread idle time over all running threads (i.e. it
should remain valid even if some threads are paused or stopped), and
makes use of it in the stats / "show info" reports.
Sending traffic over only two connections of an 8-thread process
would previously show this erratic CPU usage pattern:
$ while :; do socat /tmp/sock1 - <<< "show info"|grep ^Idle;sleep 0.1;done
Idle_pct: 30
Idle_pct: 35
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 35
Idle_pct: 33
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Now it shows this more accurate measurement:
$ while :; do socat /tmp/sock1 - <<< "show info"|grep ^Idle;sleep 0.1;done
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
This is not technically a bug but this lack of precision definitely affects
some users who rely on the idle_pct measurement. This should at least be
backported to 2.4, and might be to some older releases depending on users
demand.
In 2.4 we extended the max poll time from 1s to 60s with commit
4f59d3861 ("MINOR: time: increase the minimum wakeup interval to 60s").
This had the consequence that the calculation of the idle time percentage
may overflow during the multiply by 100 if the thread had slept 43s or
more. Let's change this to a 64 bit computation. This will have no
performance impact since this is done at most twice per second.
This should fix github issue #1366.
This must be backported to 2.4.
To be able to provide JA3 compatible TLS Fingerprints we need to expose
all Client Hello captured data using fetchers. Patch provides new
and modifies existing fetchers to add ability to filter out GREASE values:
- ssl_fc_cipherlist_*
- ssl_fc_ecformats_bin
- ssl_fc_eclist_bin
- ssl_fc_extlist_bin
- ssl_fc_protocol_hello_id
When we set tune.ssl.capture-cipherlist-size to a non-zero value
we are able to capture cipherlist supported by the client. To be able to
provide JA3 compatible TLS fingerprinting we need to capture more
information from Client Hello message:
- SSL Version
- SSL Extensions
- Elliptic Curves
- Elliptic Curve Point Formats
This patch allows HAProxy to capture such information and store it for
later use.
There are regularly places, especially in config analysis, where we
need to report certain things (warnings or errors) only once, but
where implementing a counter is sufficiently deterrent so that it's
not done.
Let's add a simple ONLY_ONCE() macro that implements a static variable
(char) which is atomically turned on, and returns true if it's set for
the first time. This uses fairly compact code, a single byte of BSS
and is thread-safe. There are probably a number of places in the config
parser where this could be used. It may also be used to implement a
WARN_ON() similar to BUG_ON() but which would only warn once.
Define a flag to mark a server as non purgeable. This flag will be used
for "delete server" CLI handler. All servers without this flag will be
eligible to runtime suppression.
In a future patch, it will be possible to remove at runtime every
servers, both static and dynamic. This requires to extend the server
refcount for all instances.
First, refcount manipulation functions have been renamed to better
express the API usage.
* srv_refcount_use -> srv_take
The refcount is always initialize to 1 on the server creation in
new_server. It's also incremented for each check/agent configured on a
server instance.
* free_server -> srv_drop
This decrements the refcount and if null, the server is freed, so code
calling it must not use the server reference after it. As a bonus, this
function now returns the next server instance. This is useful when
calling on the server loop without having to save the next pointer
before each invocation.
In these functions, remove the checks that prevent refcount on
non-dynamic servers. Each reference to "dynamic" in variable/function
naming have been eliminated as well.
A dynamic server may be deleted at runtime at the same moment when the
stats applet is pointing to it. Use the server refcount to prevent
deletion in this case.
This should be backported up to 2.4, with an observability period of 2
weeks. Note that it requires the dynamic server refcounting feature
which has been implemented on 2.5; the following commits are required :
- MINOR: server: implement a refcount for dynamic servers
- BUG/MINOR: server: do not use refcount in free_server in stopping mode
- MINOR: server: return the next srv instance on free_server
As a convenience, return the next server instance from servers list on
free_server.
This is particularily useful when using this function on the servers
list without having to save of the next pointer before calling it.
Implements a way of checking the running openssl version:
If the OpenSSL support was not compiled within HAProxy it will returns a
error, so it's recommanded to do a SSL feature check before:
$ ./haproxy -cc 'feature(OPENSSL) && openssl_version_atleast(0.9.8zh) && openssl_version_before(3.0.0)'
This will allow to select the SSL reg-tests more carefully.
Include the correct .h files in http_client.c and http_client.h.
The api.h is needed in http_client.c and http_client-t.h is now include
directly from http_client.h
The X509_STORE_CTX_get0_cert did not exist yet on OpenSSL 1.0.2 and
neither did X509_STORE_CTX_get0_chain, which was not actually needed
since its get1 equivalent already existed.
Most of the SSL sample fetches related to the client certificate were
based on the SSL_get_peer_certificate function which returns NULL when
the verification process failed. This made it impossible to use those
fetches in a log format since they would always be empty.
The patch adds a reference to the X509 object representing the client
certificate in the SSL structure and makes use of this reference in the
fetches.
The reference can only be obtained in ssl_sock_bind_verifycbk which
means that in case of an SSL error occurring before the verification
process ("no shared cipher" for instance, which happens while processing
the Client Hello), we won't ever start the verification process and it
will be impossible to get information about the client certificate.
This patch also allows most of the ssl_c_XXX fetches to return a usable
value in case of connection failure (because of a verification error for
instance) by making the "conn->flags & CO_FL_WAIT_XPRT" test (which
requires a connection to be established) less strict.
Thanks to this patch, a log-format such as the following should return
usable information in case of an error occurring during the verification
process :
log-format "DN=%{+Q}[ssl_c_s_dn] serial=%[ssl_c_serial,hex] \
hash=%[ssl_c_sha1,hex]"
It should answer to GitHub issue #693.
This commit implements a very simple HTTP Client API.
A client can be operated by several functions:
- httpclient_new(), httpclient_destroy(): create
and destroy the struct httpclient instance.
- httpclient_req_gen(): generate a complete HTX request using the
the absolute URL, the method and a list of headers. This request
is complete and sets the HTX End of Message flag. This is limited
to small request we don't need a body.
- httpclient_start() fill a sockaddr storage with a IP extracted
from the URL (it cannot resolve an fqdm for now), start the
applet. It also stores the ptr of the caller which could be an
appctx or something else.
- hc->ops contains a list of callbacks used by the
HTTPClient, they should be filled manually after an
httpclient_new():
* res_stline(): the client received a start line, its content
will be stored in hc->res.vsn, hc->res.status, hc->res.reason
* res_headers(): the client received headers, they are stored in
hc->res.hdrs.
* res_payload(): the client received some payload data, they are
stored in the hc->res.buf buffer and could be extracted with the
httpclient_res_xfer() function, which takes a destination buffer
as a parameter
* res_end(): this callback is called once we finished to receive
the response.
While http_parse_scheme() extracts a scheme from a URI by extracting
exactly the valid characters and stopping on delimiters, this new
function performs the same on a fixed-size string.
This new class exposes methods to manipulate HTTP messages from a filter
written in lua. Like for the HTTP class, there is a bunch of methods to
manipulate the message headers. But there are also methods to manipulate the
message payload. This part is similar to what is available in the Channel
class. Thus the payload can be duplicated, erased, modified or
forwarded. For now, only DATA blocks can be retrieved and modified because
the current API is limited. No HTTPMessage method is able to yield. Those
manipulating the headers are always called on messages containing all the
headers, so there is no reason to yield. Those manipulating the payload are
called from the http_payload filters callback function where yielding is
forbidden.
When an HTTPMessage object is instantiated, the underlying Channel object
can be retrieved via the ".channel" field.
For now this class is not used because the HTTP filtering is not supported
yet. It will be the purpose of another commit.
There is no documentation for now.
A lua TXN can be created when a sample fetch, an action or a filter callback
function is executed. A flag is now used to track the execute context.
Respectively, HLUA_TXN_SMP_CTX, HLUA_TXN_ACT_CTX and HLUA_TXN_FLT_CTX. The
filter flag is not used for now.
When a script is executed, a flag is used to allow it to yield. An error is
returned if a lua function yield, explicitly or not. But there is no way to
get this capability in C functions. So there is no way to choose to yield or
not depending on this capability.
To fill this gap, the flag HLUA_NOYIELD is introduced and added on the lua
context if the current script execution is not authorized to yield. Macros
to set, clear and test this flags are also added.
This feature will be usefull to fix some bugs in lua actions execution.
Implement a mechanism to free a started check on runtime for dynamic
servers. A new function check_purge is created for this. The check task
will be marked for deletion and scheduled to properly close connection
elements and free the task/tasklet/buf_wait elements.
This function will be useful to delete a dynamic server wich checks.
It is necessary to have a refcount mechanism on dynamic servers to be
able to enable check support. Indeed, when deleting a dynamic server
with check activated, the check will be asynchronously removed. This is
mandatory to properly free the check resources in a thread-safe manner.
The server instance must be kept alive for this.
Remove static qualifier on init_srv_check, init_srv_agent_check and
start_check_task. These functions will be called in server.c for dynamic
servers with checks.
Implement an equivalent of task_kill for tasklets. This function can be
used to request a tasklet deletion in a thread-safe way.
Currently this function is unused.
There was no way to access the SPOE filter configuration from the agent
object. However it could be handy to have it. And in fact, this will be
required to fix a bug.
Right now we're using a DWCAS to atomically set the running_mask while
being constrained by the thread_mask. This DWCAS is annoying because we
may seriously need it later when adding support for thread groups, for
checking that the running_mask applies to the correct group.
It turns out that the DWCAS is not strictly necessary because we never
need it to set the thread_mask based on the running_mask, only the other
way around. And in fact, the running_mask is always cleared alone, and
the thread_mask is changed alone as well. The running_mask is only
relevant to indicate a takeover when the thread_mask matches it. Any
bit set in running and not present in thread_mask indicates a transition
in progress.
As such, it is possible to re-arrange this by using a regular CAS around a
consistency check between running_mask and thread_mask in fd_update_events
and by making a CAS on running_mask then an atomic store on the thread_mask
in fd_takeover(). The only other case is fd_delete() but that one already
sets the running_mask before clearing the thread_mask, which is compatible
with the consistency check above.
This change has happily survived 10 billion takeovers on a 16-thread
machine at 800k requests/s.
The fd-migration doc was updated to reflect this change.
This one is set whenever an FD is reported by a poller with a null owner,
regardless of the thread_mask. It has become totally meaningless because
it only indicates a migrated FD that was not yet reassigned to a thread,
but as soon as a thread uses it, the status will change to skip_fd. Thus
there is no reason to distinguish between the two, it adds more confusion
than it helps. Let's simply drop it.
The current principle of running under isolation was made to access
sensitive data while being certain that no other thread was using them
in parallel, without necessarily having to place locks everywhere. The
main use case are "show sess" and "show fd" which run over long chains
of pointers.
The thread_isolate() call relies on the "harmless" bit that indicates
for a given thread that it's not currently doing such sensitive things,
which is advertised using thread_harmless_now() and which ends usings
thread_harmless_end(), which also waits for possibly concurrent threads
to complete their work if they took this opportunity for starting
something tricky.
As some system calls were notoriously slow (e.g. mmap()), a bunch of
thread_harmless_now() / thread_harmless_end() were placed around them
to let waiting threads do their work while such other threads were not
able to modify memory contents.
But this is not sufficient for performing memory modifications. One such
example is the server deletion code. By modifying memory, it not only
requires that other threads are not playing with it, but are not either
in the process of touching it. The fact that a pool_alloc() or pool_free()
on some structure may call thread_harmless_now() and let another thread
start to release the same object's memory is not acceptable.
This patch introduces the concept of "idle threads". Threads entering
the polling loop are idle, as well as those that are waiting for all
others to become idle via the new function thread_isolate_full(). Once
thread_isolate_full() is granted, the thread is not idle anymore, and
it is released using thread_release() just like regular isolation. Its
users have to keep in mind that across this call nothing is granted as
another thread might have performed shared memory modifications. But
such users are extremely rare and are actually expecting this from their
peers as well.
Note that that in case of backport, this patch depends on previous patch:
MINOR: threads: make thread_release() not wait for other ones to complete
This patch splits the disabled state of a proxy into a PR_DISABLED and a
PR_STOPPED state.
The first one is set when the proxy is disabled in the configuration
file, and the second one is set upon a stop_proxy().
Rename the 'dontloglegacyconnerr' option to 'log-error-via-logformat'
which is much more self-explanatory and readable.
Note: only legacy keywords don't use hyphens, it is recommended to
separate words with them in new keywords.
The x86-tso model makes the load and store barriers unneeded for our
usage as long as they perform at least a compiler barrier: the CPU
will respect store ordering and store vs load ordering. It's thus
safe to remove the lfence and sfence which are normally needed only
to communicate with external devices. Let's keep the mfence though,
to make sure that reads of same memory location after writes report
the value from memory and not the one snooped from the write buffer
for too long.
An in-depth review of all use cases tends to indicate that this is
okay in the rest of the code. Some parts could be cleaned up to
use atomic stores and atomic loads instead of explicit barriers
though.
Doing this reliably increases the overall performance by about 2-2.5%
on a 8c-16t Xeon thanks to less frequent flushes (it's likely that the
biggest gain is in the MT lists which use them a lot, and that this
results in less cache line flushes).
The atomic_load/atomic_store/atomic_xchg operations were all forced to
__ATOMIC_SEQ_CST, which results in explicit store or even full barriers
even on x86-tso while we do not need them: we're not communicating with
external devices for example and are only interested in respecting the
proper ordering of loads and stores between each other.
These ones being rarely used, the emitted code on x86 remains almost the
same (barring a handful of locations). However they will allow to place
correct barriers at other places where atomics are accessed a bit lightly.
The patch is marked medium because we can never rule out the risk of some
bugs on more relaxed platforms due to the rest of the code.
update_freq_ctr_period() was using relaxed atomics without using barriers,
which usually works fine on x86 but not everywhere else. In addition, some
values were read without being enclosed by barriers, allowing the compiler
to possibly prefetch them a bit earlier. Finally, freq_ctr_total() was also
reading these without enough barriers. Let's make explicit use of atomic
loads and atomic stores to get rid of this situation. This required to
slightly rearrange the freq_ctr_total() loop, which could possibly slightly
improve performance under extreme contention by avoiding to reread all
fields.
A backport may be done to 2.4 if a problem is encountered, but last tests
on arm64 with LSE didn't show any issue so this can possibly stay as-is.
This function already performs a number of checks prior to calling the
IOCB, and detects the change of thread (FD migration). Half of the
controls are still in each poller, and these pollers also maintain
activity counters for various cases.
Note that the unreliable test on thread_mask was removed so that only
the one performed by fd_set_running() is now used, since this one is
reliable.
Let's centralize all that fd-specific logic into the function and make
it return a status among:
FD_UPDT_DONE, // update done, nothing else to be done
FD_UPDT_DEAD, // FD was already dead, ignore it
FD_UPDT_CLOSED, // FD was closed
FD_UPDT_MIGRATED, // FD was migrated, ignore it now
Some pollers already used to call it last and have nothing to do after
it, regardless of the result. epoll has to delete the FD in case a
migration is detected. Overall this removes more code than it adds.
Since 2.4 with commit f50906519 ("MEDIUM: fd: merge fdtab[].ev and state
for FD_EV_* and FD_POLL_* into state") we can merge all flag updates at
once in fd_update_events(). Previously this was performed in 1 to 3 steps,
setting the polling state, then setting READY_R if in/err/hup, and setting
READY_W if out/err. But since the commit above, all flags are stored
together in the same structure field that is being updated with the new
flags, thus we can simply update the flags altogether and avoid multiple
atomic operations. This even removes the need for atomic ops for FDs that
are not shared.
There's a theoretical race (that we failed to trigger) in function
fd_update_events(), which could strike on idle connections. The "locked"
variable will most often be 0 as the FD is bound to the current thread
only. Another thread could take it over once "locked" is set, change
the thread and running masks. Then the first thread updates the FD's
state non-atomically and possibly overwrites what the other thread was
preparing. It still looks like the FD's state will ultimately converge
though.
The solution against this is to set the running flag earlier so that a
takeover() attempt cannot succeed, or that the fd_set_running() attempt
fails, indicating that nothing needs to be done on this FD.
While this is sufficient for a simple fix to be backported, it leaves
the FD actively polled in the calling thread, this will trigger a second
wakeup which will notice the absence of tid_bit in the thread_mask,
getting rid of it.
A more elaborate solution would consist in calling fd_set_running()
directly from the pollers before calling fd_update_events(), getting
rid of the thread_mask test and letting the caller eliminate that FD
from its list if needed.
Interestingly, this code also proves to be suboptimal in that it sets
the FD state twice instead of calculating the new state at once and
always using a CAS to set it. This is a leftover of a simplification
that went into 2.4 and which should be explored in a future patch.
This may be backported as far as 2.2.
The takeover of idle conns between threads is particularly tricky, for
two reasons:
- there's no way to atomically synchronize kernel-side polling with
userspace activity, so late events will always be reported for some
FDs just migrated ;
- upon error, an FD may be immediately reassigned to whatever other
thread since it's process-wide.
The current model uses the FD's thread_mask to figure if an FD still
ought to be reported or not, and a per-thread idle connection queue
from which eligible connections are atomically added/picked. I/Os
coming from the bottom for such a connection must remove it from the
list so that it's not elected. Same for timeout tasks and iocbs. And
these last ones check their context under the idle_conn lock to judge
if they're still allowed to run.
One rare case was omitted: the wake() callback. This one is rare, it
may serve to notify about finalized connect() calls that are not being
polled, as well as unhandled shutdowns and errors. This callback was
not protected till now because it wasn't seen as sensitive, but there
exists a particular case where it may be called without protectoin in
parallel to a takeover. This happens in the following sequence:
- thread T1 wants to establish an outgoing connection
- the connect() call returns EINPROGRESS
- the poller adds it using epoll_ctl()
- epoll_wait() reports it, connect() is done. The connection is
not being marked as actively polled anymore but is still known
from the poller.
- the request is sent over that connection using send(), which
queues to system buffers while data are being delivered
- the scheduler switches to other tasks
- the request is physically sent
- the server responds
- the stream is notified that send() succeeded, and makes progress,
trying to recv() from that connection
- the recv() succeeds, the response is delivered
- the poller doesn't need to be touched (still no active polling)
- the scheduler switches to other tasks
- the server closes the connection
- the poller on T1 is notified of the SHUTR and starts to call mux->wake()
- another thread T2 takes over the connection
- T2 continues to run inside wake() and releases the connection
- T2 is just dereferencing it.
- BAM.
The most logical solution here is to surround the call to wake() with an
atomic removal/insert of the connection from/into the idle conns lists.
This way, wake() is guaranteed to run alone. Any other poller reporting
the FD will not have its tid_bit in the thread_mask si will not bother
it. Another thread trying a takeover will not find this connection. A
task or tasklet being woken up late will either be on the same thread,
or be called on another one with a NULL context since it will be the
consequence of previous successful takeover, and will be ignored. Note
that the extra cost of a lock and tree access here have a low overhead
which is totally amortized given that these ones roughly happen 1-2
times per connection at best.
While it was possible to crash the process after 10-100k req using H2
and a hand-refined configuration achieving perfect synchronism between
a long (20+) chain of proxies and a short timeout (1ms), now with that
fix this never happens even after 10M requests.
Many thanks to Olivier for proposing this solution and explaining why
it works.
This should be backported as far as 2.2 (when inter-thread takeover was
introduced). The code in older versions will be found in conn_fd_handler().
A workaround consists in disabling inter-thread pool sharing using:
tune.idle-pool.shared off
In case of connection failure, a dedicated error message is output,
following the format described in section "Error log format" of the
documentation. These messages cannot be configured through a log-format
option.
This patch adds a new option, "dontloglegacyconnerr", that disables
those error logs when set, and "replaces" them by a regular log line
that follows the configured log-format (thanks to a call to sess_log in
session_kill_embryonic).
The new fc_conn_err sample fetch allows to add the legacy error log
information into a regular log format.
This new option is unset by default so the logging logic will remain the
same until this new option is used.
This new sample fetch along the ssl_fc_hsk_err_str fetch contain the
last SSL error of the error stack that occurred during the SSL
handshake (from the frontend's perspective). The errors happening during
the client's certificate verification will still be given by the
ssl_c_err and ssl_c_ca_err fetches. This new fetch will only hold errors
retrieved by the OpenSSL ERR_get_error function.
The fc_conn_err and fc_conn_err_str sample fetches give information
about the problem that made the connection fail. This information would
previously only have been given by the error log messages meaning that
thanks to these fetches, the error log can now be included in a custom
log format. The log strings were all found in the conn_err_code_str
function.
The CO_ER_SSL_EARLY_FAILED and CO_ER_CIP_TIMEOUT connection error codes
were missing in the conn_err_code_str switch which converts the error
codes into string.
This patch can be backported on all stable branches.
This patch renames the proxy capability "LUA" to "INT" so it could be
used for any internal proxy.
Every proxy that are not user defined should use this flag.
Oss-fuzz reports in issue 36328 that we can recurse too far by passing
extremely deep expressions to the ".if" parser. I thought we were still
limited to the 1024 chars per line, that would be highly sufficient, but
we don't have any limit now :-/
Let's just pass a maximum recursion counter to the recursive parsers.
It's decremented for each call and the expression fails if it reaches
zero. On the most complex paths it can add 3 levels per parenthesis,
so with a limit of 1024, that's roughly 343 nested sub-expressions that
are supported in the worst case. That's more than sufficient, for just
a few kB of RAM.
No backport is needed.
This option had always been broken in HTX, which means that the first
breakage appeared in 1.9, that it was broken by default in 2.0 and that
no workaround existed starting with 2.1. The way this option works is
praticularly unfit to the rest of the configuration and to the internal
architecture. It had some uses when it was introduced 14 years ago but
nowadays it's possible to do much better and more reliable using a
set of "http-request set-dst" and "http-request set-uri" rules, which
additionally are compatible with DNS resolution (via do-resolve) and
are not exclusive to normal load balancing. The "option-http_proxy"
example config file was updated to reflect this.
The option is still parsed so that an error message gives hints about
what to look for.
The cfg_free_cond_{term,and,expr}() functions used to take a pointer to
the pointer to be freed in order to replace it with a NULL once done.
But this doesn't cope well with freeing lists as it would require
recursion which the current code tried to avoid.
Let's just change the API to free the area and let the caller set the NULL.
This leak was reported by oss-fuzz (issue 36265).
Now it's possible to form a term using parenthesis around an expression.
This will soon allow to build more complex expressions. For now they're
still pretty limited but parenthesis do work.
Now evaluating a condition will rely on an expression (or an empty string),
and this expression will support ORing a sub-expression with another
optional expression. The sub-expressions ANDs a term with another optional
sub-expression. With this alone precedence between && and || is respected,
and the following expression:
A && B && C || D || E && F || G
will naturally evaluate as:
(A && B && C) || D || (E && F) || G
It's not convenient to let the caller be responsible for node allocation,
better have the leaf function do that and implement the accompanying free
call. Now only a pointer is needed instead of a struct, and the leaf
function makes sure to leave the situation in a consistent way.
The purpose is to build a descendent parser that will split conditions
into expressions made of terms. There are two phases, a parsing phase
and an evaluation phase. Strictly speaking it's not required to cut
that in two right now, but it's likely that in the future we won't want
certain predicates to be evaluated during the parsing (e.g. file system
checks or execution of some external commands).
The cfg_eval_condition() function is now much simpler, it just tries to
parse a single term, and if OK evaluates it, then returns the result.
Errors are unchanged and may still be reported during parsing or
evaluation.
It's worth noting that some invalid expressions such as streq(a,b)zzz
continue to parse correctly for now (what remains after the parenthesis
is simply ignored as not necessary).
The .if/.else/.endif and condition evaluation code is quite dirty and
was dumped into cfgparse.c because it was easy. But it should be tidied
quite a bit as it will need to evolve.
Let's move all that to cfgcond.{c,h}.
make_arg_list() can create an array of arguments, some of which remain
to be resolved, but all users had to deal with their own roll back on
error. Let's add a free_args() function to release all the array's
elements and let the caller deal with the array itself (sometimes it's
allocated in the stack).
Since 1.9 with commit 673867c35 ("MAJOR: applets: Use tasks, instead
of rolling our own scheduler.") the thread_mask field of the appctx
became unused, but the code hadn't been cleaned for this. The appctx
has its own task and the task's thread_mask is the one to be displayed.
It's worth noting that all calls to appctx_new() pass tid_bit as the
thread_mask. This makes sense, and it could be convenient to decide
that this becomes the norm and to simplify the API.
Define a new global config statement named
"h2-workaround-bogus-websocket-clients".
This statement will disable the automatic announce of h2 websocket
support as specified in the RFC8441. This can be use to overcome clients
which fail to implement the relatively fresh RFC8441. Clients will in
his case automatically downgrade to http/1.1 for the websocket tunnel
if the haproxy configuration allows it.
This feature is relatively simple and can be backported up to 2.4, which
saw the introduction of h2 websocket support.
Replace http_get_path by the http_uri_parser API. The new functions is
renamed http_parse_path. Replace duplicated code for scheme and
authority parsing by invocations to http_parse_scheme/authority.
If no scheme is found for an URI detected as an absolute-uri/authority,
consider it to be an authority format : no path will be found. For an
absolute-uri or absolute-path, use the remaining of the string as the
path. A new http_uri_parser state is declared to mark the path parsing
as done.
Replace http_get_authority by the http_uri_parser API.
The new function is renamed http_parse_authority. Replace duplicated
scheme parsing code by http_parse_scheme invocation. A new
http_uri_parser state is declared to mark the authority parsing as done.
Replace http_get_scheme by the http_uri_parser API. The new function is
renamed http_parse_scheme. A new http_uri_parser state is declared to
mark the scheme parsing as completed.
Implement a http uri parser type. This type will be used as a context to
parse the various elements of an uri.
The goal of this serie of patches is to factorize duplicated code
between the http_get_scheme/authority/path functions. A simple parsing
API is designed to be able to extract once each element of an HTTP URI
in order. The functions will be renamed in the following patches to
reflect the API change with the prefix http_parse_*.
For the parser API, the http_uri_parser type must first be
initialized before usage. It will register the URI to parse and detect
its format according to the rfc 7230.
Implement the scheme-based uri normalization as described in rfc3986
6.3.2. Its purpose is to remove the port of an uri if the default one is
used according to the uri scheme : 80/http and 443/https. All other
ports are not touched.
This method uses an htx message as an input. It requires that the target
URI is in absolute-form with a http/https scheme. This represents most
of h2 requests except CONNECT. On the contrary, most of h1 requests
won't be elligible as origin-form is the standard case.
The normalization is first applied on the target URL of the start line.
Then, it is conducted on every Host headers present, assuming that they
are equivalent to the target URL.
This change will be notably useful to not confuse users who are
accustomed to use the host for routing without specifying default ports.
This problem was recently encountered with Firefox which specify the 443
default port for http2 websocket Extended CONNECT.
This patch adds the definition of two new array data_types:
'gpc': This is an array of 32bits General Purpose Counters.
'gpc_rate': This is an array on increment rates of General Purpose Counters.
Like for all arrays, they are limited to 100 elements.
This patch also adds actions and fetches to handle
elements of those arrays.
Note: As documented, those new actions and fetches won't
apply to the legacy 'gpc0', 'gpc1', 'gpc0_rate' nor 'gpc1_rate'.
This patch adds the definition of a new array data_type
'gpt'. This is an array of 32bits General Purpose Tags.
Like for all arrays, it is limited to 100 elements.
This patch also adds actions and fetches to handle
elements of this array.
Note: As documented, those new actions and fetches won't
apply to the legacy 'gpt0' data type.
This patch adds support of array data_types on the peer protocol.
The table definition message will provide an additionnal parameter
for array data-types: the number of elements of the array.
In case of array of frqp it also provides a second parameter:
the period used to compute freq counter.
The array elements are std_type values linearly encoded in
the update message.
Note: if a remote peer announces an array data_type without
parameters into the table definition message, all updates
on this table will be ignored because we can not
parse update messages consistently.
This patch provides the code to handle arrays of some
standard types (SINT, UINT, ULL and FRQP) in stick table.
This way we could define new "array" data types.
Note: the number of elements of an array was limited
to 100 to put a limit and to ensure that an encoded
update message will continue to fit into a buffer
when the peer protocol will handle such data types.
This patch replaces all advanced data type aliases on
stktable_data_cast calls by standard types.
This way we could call the same stktable_data_cast
regardless of the used advanced data type as long they
are using the same std type.
It also removes all the advanced data type aliases.
It is now possible to set the Netfilter MARK and the TOS field value in all
packets sent to the client from any tcp-request rulesets or the "tcp-response
content" one. To do so, the parsing of "set-mark" and "set-tos" actions are
moved in tcp_act.c and the actions evaluation is handled in dedicated functions.
This patch may be backported as far as 2.2 if necessary.
It is now possible to set the "nice" factor of the current stream from a
"tcp-request content" or "tcp-response content" ruleset. To do so, the
action parsing is moved in stream.c and the action evaluation is handled in
a dedicated function.
This patch may be backported as far as 2.2 if necessary.
It is now possible to set the stream log level from a "tcp-request content"
or "tcp-response content" ruleset. To do so, the action parsing is moved in
stream.c and the action evaluation is handled in a dedicated function.
This patch should fix issue #1306. It may be backported as far as 2.2 if
necessary.
Now we directly use p->queue to get to the queue, which is much more
straightforward. The performance on 100 servers and 16 threads
increased from 560k to 574k RPS, or 2.5%.
A lot more simplifications are possible, but the minimum was done at
this point.
A queue is specific to a server or a proxy, so we don't need to place
this distinction inside all pendconns, it can be in the queue itself.
This commit adds the relevant fields "px" and "sv" into the struct
queue, and initializes them accordingly.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
Till now whenever a server or proxy's queue was touched, this server
or proxy's lock was taken. Not only this requires distinct code paths,
but it also causes unnecessary contention with other uses of these locks.
This patch adds a lock inside the "queue" structure that will be used
the same way by the server and the proxy queuing code. The server used
to use a spinlock and the proxy an rwlock, though the queue only used
it for locked writes. This new version uses a spinlock since we don't
need the read lock part here. Tests have not shown any benefit nor cost
in using this one versus the rwlock so we could change later if needed.
The lower contention on the locks increases the performance from 362k
to 374k req/s on 16 threads with 20 servers and leastconn. The gain
with roundrobin even increases by 9%.
This is tagged medium because the lock is changed, but no other part of
the code touches the queues, with nor without locking, so this should
remain invisible.
This reverts commit fcb8bf8650.
The recent changes since 5304669e1 MEDIUM: queue: make
pendconn_process_next_strm() only return the pendconn opened a tiny race
condition between stream_free() and process_srv_queue(), as the pendconn
is accessed outside of the lock, possibly while it's being freed. A
different approach is required.
This reverts commit c83e45e9b0.
The recent changes since 5304669e1 MEDIUM: queue: make
pendconn_process_next_strm() only return the pendconn opened a tiny race
condition between stream_free() and process_srv_queue(), as the pendconn
is accessed outside of the lock, possibly while it's being freed. A
different approach is required.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
Till now whenever a server or proxy's queue was touched, this server
or proxy's lock was taken. Not only this requires distinct code paths,
but it also causes unnecessary contention with other uses of these locks.
This patch adds a lock inside the "queue" structure that will be used
the same way by the server and the proxy queuing code. The server used
to use a spinlock and the proxy an rwlock, though the queue only used
it for locked writes. This new version uses a spinlock since we don't
need the read lock part here. Tests have not shown any benefit nor cost
in using this one versus the rwlock so we could change later if needed.
The lower contention on the locks increases the performance from 491k
to 507k req/s on 16 threads with 20 servers and leastconn. The gain
with roundrobin even increases by 6%.
The performance profile changes from this:
13.03% haproxy [.] fwlc_srv_reposition
8.08% haproxy [.] fwlc_get_next_server
3.62% haproxy [.] process_srv_queue
1.78% haproxy [.] pendconn_dequeue
1.74% haproxy [.] pendconn_add
to this:
11.95% haproxy [.] fwlc_srv_reposition
7.57% haproxy [.] fwlc_get_next_server
3.51% haproxy [.] process_srv_queue
1.74% haproxy [.] pendconn_dequeue
1.70% haproxy [.] pendconn_add
At this point the differences are mostly measurement noise.
This is tagged medium because the lock is changed, but no other part of
the code touches the queues, with nor without locking, so this should
remain invisible.
This structure will be common to proxies and servers and will contain
everything needed to handle their respective queues. For now it's only
a tree head, a length and an index.
This essentially reverts commit 2b4370078 ("MINOR: lb/api: let callers
of take_conn/drop_conn tell if they have the lock") that was merged
during 2.4 before the various locks could be eliminated at the lower
layers. Passing that information complicates the cleanup of the queuing
code and it's become useless.
The server_parse_maxconn_change_request locks the server lock. However,
this function can be called via agent-checks or lua code which already
lock it. This bug has been introduced by the following commit :
commit 79a88ba3d0
BUG/MAJOR: server: prevent deadlock when using 'set maxconn server'
This commit tried to fix another deadlock with can occur because
previoulsy server_parse_maxconn_change_request requires the server lock
to be held. However, it may call internally process_srv_queue which also
locks the server lock. The locking policy has thus been updated. The fix
is functional for the CLI 'set maxconn' but fails to address the
agent-check / lua counterparts.
This new issue is fixed in two steps :
- changes from the above commit have been reverted. This means that
server_parse_maxconn_change_request must again be called with the
server lock.
- to counter the deadlock fixed by the above commit, process_srv_queue
now takes an argument to render the server locking optional if the
caller already held it. This is only used by
server_parse_maxconn_change_request.
The above commit was subject to backport up to 1.8. Thus this commit
must be backported in every release where it is already present.
GitHub uses github/linguist to determine the programming language used for each
source file to show statistics and to power the search. In cases of unique file
extensions this is easy, but for `.h` files the situation is less clear as they
are used for C, C++, Objective C and more. In these cases linguist makes use of
heuristics to determine the language.
One of these heuristics for C++ is that the file contains a line beginning with
`try`, only preceded by whitespace indentation. This heuristic matches the long
comment at the bottom of `channel-t.h`, as one sentence includes the word `try`
after a linebreak.
Fix this misdetection by changing the comment to follow the convention that all
lines start with an asterisk.
The function ssl_sock_load_srv_cert will be used at runtime for dynamic
servers. If the cert is not loaded on ckch tree, we try to access it
from the file-system.
Now this access operation is rendered optional by a new function
argument. It is only allowed at parsing time, but will be disabled for
dynamic servers at runtime.
Explicitly call ssl_initialize_random to initialize the random generator
in init() global function. If the initialization fails, the startup is
interrupted.
This commit is in preparation for support of ssl on dynamic servers. To
be able to activate ssl on dynamic servers, it is necessary to ensure
that the random generator is initialized on startup regardless of the
config. It cannot be called at runtime as access to /dev/urandom is
required.
This also has the effect to fix the previous non-consistent behavior.
Indeed, if bind or server in the config are using ssl, the
initialization function was called, and if it failed, the startup was
interrupted. Otherwise, the ssl initialization code could have been
called through the ssl server for lua, but this times without blocking
the startup on error. Or not called at all if lua was deactivated.
The SF_SRV_REUSED flag was set if a stream reused a backend connection.
One of its purpose is to count the total reuse on the backend in
opposition to newly instantiated connection.
However, the flag was diverted from its original purpose since the
following commit :
e8f5f5d8b2
BUG/MEDIUM: servers: Only set SF_SRV_REUSED if the connection if fully ready.
With this change, the flag is not set anymore if the mux is not ready
when a connection is picked for reuse. This can happen for multiplexed
connections which are inserted in the available list as soon as created
in http-reuse always mode. The goal of this change is to not retry
immediately this request in case on an error on the same server if the
reused connection is not fully ready.
This change is justified for the retry timeout handling but it breaks
other places which still uses the flag for its original purpose. Mainly,
in this case the wrong 'connect' backend counter is incremented instead
of the 'reuse' one. The flag is also used in http_return_srv_error and
may have an impact if a http server error is replied for this stream.
To fix this problem, the original purpose of the flag is restored by
setting it unconditionaly when a connection is reused. Additionally, a
new flag SF_SRV_REUSED_ANTICIPATED is created. This flag is set when the
connection is reused but the mux is not ready yet. For the timeout
handling on error, the request is retried immediately only if the stream
reused a connection without this newly anticipated flag.
This must be backported up to 2.1.
When a server relies on a SRV resolution, a task is created to clean it up
(fqdn/port and address) when the SRV resolution is considered as outdated
(based on the resolvers 'timeout' value). It is only possible if the server
inherits outdated info from a state file and is no longer selected to be
attached to a SRV item. Note that most of time, a server is attached to a
SRV item. Thus when the item becomes obsolete, the server is cleaned
up.
It is important to have such task to be sure the server will be free again
to have a chance to be resolved again with fresh information. Of course,
this patch is a workaround to solve a design issue. But there is no other
obvious way to fix it without rewritting all the resolvers part. And it must
be backportable.
This patch relies on following commits:
* MINOR: resolvers: Clean server in a dedicated function when removing a SRV item
* MINOR: resolvers: Remove server from named_servers tree when removing a SRV item
All the series must be backported as far as 2.2 after some observation
period. Backports to 2.0 and 1.8 must be evaluated.
To avoid repeating the same source code, allocating memory and initializing
the per_thr field from the server structure is transferred to a separate
function.
This function appends to a buffer some information from a connection.
This will be used by traces and possibly some debugging as well. A
frontend/backend/server, transport/control layers, source/destination
ip:port, connection pointer and direction are reported depending on
the available information.
With a single process, we don't need to USE_PRIVATE_CACHE, USE_FUTEX
nor USE_PTHREAD_PSHARED anymore. Let's only keep the basic spinlock
to lock between threads.
The relative_pid is always 1. In mworker mode we also have a
child->relative_pid which is always equalt relative_pid, except for a
master (0) or external process (-1), but these types are usually tested
for, except for one place that was amended to carefully check for the
PROC_O_TYPE_WORKER option.
Changes were pretty limited as most usages of relative_pid were for
designating a process in stats output and peers protocol.
Lots of places iterating over nbproc or comparing with nbproc could be
simplified. Further, "bind-process" and "process" parsing that was
already limited to process 1 or "all" or "odd" resulted in a bind_proc
field that was either 0 or 1 during the init phase and later always 1.
All the checks for compatibilities were removed since it's not possible
anymore to run a frontend and a backend on different processes or to
have peers and stick-tables bound on different ones. This is the largest
part of this patch.
The bind_proc field was removed from both the proxy and the receiver
structs.
Since the "process" and "bind-process" directives are still parsed,
configs making use of correct values allowing process 1 will continue
to work.
This is a leftover of a previous attempt that was introduced in 2.4 by
commit d3a88c1c3 ("MEDIUM: connection: close front idling connection on
soft-stop"). It can be backported, as the variable doesn't exist.
Since threads were introduced in 1.8, the USE_PRIVATE_CACHE mode of the
shctx was not updated to use locks. Originally it was meant to disable
sharing between processes, so it removes the lock/unlock instructions.
But with threads enabled, it's not possible to work like this anymore.
It's easy to see that once built with private cache and threads enabled,
sending violent SSL traffic to the the process instantly makes it die.
The HTTP cache is very likely affected as well.
This patch addresses this by falling back to our native spinlocks when
USE_PRIVATE_CACHE is used. In practice we could use them also for other
modes and remove all older implementations, but this patch aims at keeping
the changes very low and easy to backport. A new SHCTX_LOCK label was
added to help with debugging, but OTHER_LOCK might be usable as well
for backports.
An even lighter approach for backports may consist in always declaring
the lock (or reusing "waiters"), and calling pl_take_s() for the lock()
and pl_drop_s() for the unlock() operation. This could even be used in
all modes (process and threads), even when thread support is disabled.
Subsequent patches will further clean up this area.
This patch must be backported to all supported versions since 1.8.
This one was deprecated in 2.3 and marked for removal in 2.5. It suffers
too many limitations compared to threads, and prevents some improvements
from being engaged. Instead of a bypassable startup error, there is now
a hard error.
The parsing code was removed, and very few obvious cases were as well.
The code is deeply rooted at certain places (e.g. "for" loops iterating
from 0 to nbproc) so it will not be that trivial to remove everywhere.
The "bind" and "bind-process" parsers will have to be adjusted, though
maybe not completely changed if we later want to support thread groups
for large NUMA machines. Some stats socket restrictions were removed,
and the doc was updated according to what was done. A few places in the
doc still refer to nbproc and will have to be revisited. The master-worker
code also refers to the process number to distinguish between master and
workers and will have to be carefully adjusted. The MAX_PROCS macro was
reset to 1, this will at least reduce the size of some remaining arrays.
Two regtests were dependieng on this directive, one with an explicit
"nbproc 1" and another one testing the master's CLI using nbproc 4.
Both were adapted.
Commit ab0a5192a ("MEDIUM: config: mark "grace" as deprecated") marked
the "grace" keyword as deprecated in 2.3, tentative removal for 2.4
with a hard deadline in 2.5, so let's remove it and return an error now.
This old and outdated feature was incompatible with soft-stop, reload
and socket transfers, and keeping it forced ugly hacks in the lower
layers of the protocol stack.
This patch add a ref into servers to register them onto the
record answer item used to set their hostnames.
It also adds a head list into 'srvrq' to register servers free
to be affected to a SRV record.
A head of a tree is also added to srvrq to put servers which
present a hotname in server state file. To re-link them fastly
to the matching record as soon an item present the same name.
This results in better performances on SRV record response
parsing.
This is an optimization but it could avoid to trigger the haproxy's
internal wathdog in some circumstances. And for this reason
it should be backported as far we can (2.0 ?)
This patch adds a head list into answer items on servers which use
this record to set their IPs. It makes lookup on duplicated ip faster and
allow to check immediatly if an item is still valid renewing the IP.
This results in better performances on A/AAAA resolutions.
This is an optimization but it could avoid to trigger the haproxy's
internal wathdog in some circumstances. And for this reason
it should be backported as far we can (2.0 ?)
When an HTX block is expanded, a defragmentation may be performed first to
have enough space to copy the new data. When it happens, the meta data of
the HTX message must take account of the new data length but copied data are
still unchanged at this stage (because we need more space to update the
message content). And here there is a bug because the meta data are updated
by the caller. It means that when the blocks content is copied, the new
length is already set. Thus a block larger than the reality is copied and
data outside the buffer may be accessed, leading to a crash.
To fix this bug, htx_defrag() is updated to use an extra argument with the
new meta data to use for the referenced block. Thus the caller does not need
to update the HTX message by itself. However, it still have to update the
data.
Most of time, the bug will be encountered in the HTTP compression
filter. But, even if it is highly unlikely, in theory it is also possible to
hit it when a HTTP header (or only its value) is replaced or when the
start-line is changed.
This patch must be backported as far as 2.0.
A tiny change in commit 6af81f80f ("MEDIUM: errors: implement parsing
context type") triggered an awful bug in gcc 5 and below (4.7.4 to 5.5
confirmed affected, at least on aarch64/mips/x86_64) causing the startup
to loop forever in acl_find_target().
This was tracked down to the acl.c file seeing a different definition
of the struct proxy than other files. The reason for this is that it
sees an unpacked "enum obj_type" (4 bytes) while others see it packed
(1 byte), thus all fields in the struct are having a different
alignment, and the "acl" list is shifted one pointer to the next struct
and seems to loop onto itself.
The commit above did nothing more than adding "enum obj_type *obj" in a
new struct without including obj_type.h, and that was apparently enough
for the compiler to internally declare obj_type as a regular enum and
silently ignore the packed attribute that it discovers later, so depending
on the order of includes, some files would see it as 1 byte and others as
4.
This patch simply adds the missing include but due to the nature of the
bug, probably that creating a special "packed_enum" definition to disable
the packed attribute on such compilers could be a safer option.
No backport is needed as this is only in -dev.
The ifdefs surrounding the "show ssl ocsp-response" functionality that
were supposed to disable the code with BoringSSL were built the wrong
way.
It does not need to be backported.
Now that the modified lockless variant does not need a DWCAS anymore,
there's no reason to keep the much slower locked version, so let's
just get rid of it.
In GH issue #1275, Fabiano Nunes Parente provided a nicely detailed
report showing reproducible crashes under musl. Musl is one of the libs
coming with a simple allocator for which we prefer to keep the shared
cache. On x86 we have a DWCAS so the lockless implementation is enabled
for such libraries.
And this implementation has had a small race since day one: the allocator
will need to read the first object's <next> pointer to place it into the
free list's head. If another thread picks the same element and immediately
releases it, while both the local and the shared pools are too crowded, it
will be freed to the OS. If the libc's allocator immediately releases it,
the memory area is unmapped and we can have a crash while trying to read
that pointer. However there is no problem as long as the item remains
mapped in memory because whatever value found there will not be placed
into the head since the counter will have changed.
The probability for this to happen is extremely low, but as analyzed by
Fabiano, it increases with the buffer size. On 16 threads it's relatively
easy to reproduce with 2MB buffers above 200k req/s, where it should
happen within the first 20 seconds of traffic usually.
This is a structural issue for which there are two non-trivial solutions:
- place a read lock in the alloc call and a barrier made of lock/unlock
in the free() call to force to serialize operations; this will have
a big performance impact since free() is already one of the contention
points;
- change the allocator to use a self-locked head, similar to what is
done in the MT_LISTS. This requires two memory writes to the head
instead of a single one, thus the overhead is exactly one memory
write during alloc and one during free;
This patch implements the second option. A new POOL_DUMMY pointer was
defined for the locked pointer value, allowing to both read and lock it
with a single xchg call. The code was carefully optimized so that the
locked period remains the shortest possible and that bus writes are
avoided as much as possible whenever the lock is held.
Tests show that while a bit slower than the original lockless
implementation on large buffers (2MB), it's 2.6 times faster than both
the no-cache and the locked implementation on such large buffers, and
remains as fast or faster than the all implementations when buffers are
48k or higher. Tests were also run on arm64 with similar results.
Note that this code is not used on modern libcs featuring a fast allocator.
A nice benefit of this change is that since it removes a dependency on
the DWCAS, it will be possible to remove the locked implementation and
replace it with this one, that is then usable on all systems, thus
significantly increasing their performance with large buffers.
Given that lockless pools were introduced in 1.9 (not supported anymore),
this patch will have to be backported as far as 2.0. The code changed
several times in this area and is subject to many ifdefs which will
complicate the backport. What is important is to remove all the DWCAS
code from the shared cache alloc/free lockless code and replace it with
this one. The pool_flush() code is basically the same code as the
allocator, retrieving the whole list at once. If in doubt regarding what
barriers to use in older versions, it's safe to use the generic ones.
This patch depends on the following previous commits:
- MINOR: pools: do not maintain the lock during pool_flush()
- MINOR: pools: call malloc_trim() under thread isolation
- MEDIUM: pools: use a single pool_gc() function for locked and lockless
The last one also removes one occurrence of an unneeded DWCAS in the
code that was incompatible with this fix. The removal of the now unused
seq field will happen in a future patch.
Many thanks to Fabiano for his detailed report, and to Olivier for
his help on this issue.
Since the code was reorganized, DEBUG_UAF was still tested in the locked
pool code despite pools being disabled when DEBUG_UAF is used. Let's move
the test to pool_put_to_os() which is the one that is always called in
this condition.
The impact is only a possible misleading analysis during a troubleshooting
session due to a missing double-frees or free of const area test that is
normally already dealt with by the underlying code anyway. In practice it's
unlikely anyone will ever notice.
This should only be backported to 2.4.
This patch adds the "show ssl ocsp-response [<id>]" CLI command. This
command can be used to display the IDs of the OCSP tree entries along
with details about the entries' certificate ID (issuer's name and key
hash + serial number), or to display the details of a single
ocsp-response if an ID is given. The details displayed in this latter
case are the ones shown by a "openssl ocsp -respin <ocsp-response>
-text" call.
Since commit 04a5a44 ("BUILD: ssl: use HAVE_OPENSSL_KEYLOG instead of
OpenSSL versions") the "tune.ssl.keylog" feature is broken because
HAVE_OPENSSL_KEYLOG does not exist.
Replace this by a HAVE_SSL_KEYLOG which is defined in openssl-compat.h.
Also add an error when not built with the right openssl version.
Must be backported as far as 2.3.
Change the algorithm for the generation of the user messages context
prefix. Remove the dubious API relying on optional printf positional
arguments. This may be non portable, and in fact the CI glibc crashes
with the following error when some arguments are not present in the
format string :
"invalid %N$ use detected".
Now, a fixed buffer attached to the context instance is allocated once
for the program lifetime. Then call repeatedly snprintf with the
optional arguments of context if present to build the context string.
The buffer is deallocated via a per-thread free handler.
This does not need to be backported.
This patch adds the `-cc` (check condition) argument to evaluate conditions on
startup and return the result as the exit code.
As an example this can be used to easily check HAProxy's version in scripts:
haproxy -cc 'version_atleast(2.4)'
This resolves GitHub issue #1246.
Co-authored-by: Tim Duesterhus <tim@bastelstu.be>
Create a parsing_ctx structure. This type is used to store information
about the current file/line parsed. A global context is created and
can be manipulated when haproxy is in STARTING mode. When starting is
over, the context is resetted and should not be accessed anymore.
The user messages buffer is used to store the stderr output after the
starting is over. Each thread has it own user messages buffer. Add some
functions to add a new message, retrieve and clear the content.
The user messages buffer primary goal is to be consulted by CLI
handlers. Each handlers using it must clear the buffer before starting
its operation.
Move functions related to errors output on stderr from log.c to a newly
created errors.c file. It targets print_message and
ha_alert/warning/notice/diag functions and related startup_logs feature.
A memory allocation failure happening in chash_init_server_tree while
trying to allocate a server's lb_nodes item used in consistent hashing
would have resulted in a crash. This function is only called during
configuration parsing.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
A memory allocation failure happening in mworker_env_to_proc_list when
trying to allocate a mworker_proc would have resulted in a crash. This
function is only called during init.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
A memory allocation failure happening during peers_register_table would
have resulted in a crash. This function is only called during init.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
Two calloc calls were not checked in the srv_parse_source function.
Considering that this function could be called at runtime through a
dynamic server creation via the CLI, this could lead to an unfortunate
crash.
It was raised in GitHub issue #1233.
It could be backported to all stable branches even though the runtime
crash could only happen on branches where dynamic server creation is
possible.
b_slow_realign() function may be used to realign a buffer with a given
amount of output data, eventually 0. In such case, the head is set to
0. This function is not designed to be used with input only buffers, like
those used in the muxes. It is the purpose of b_slow_realign_ofs()
function. It does almost the same, realign a buffer. But it do so by setting
the buffer head to a specific offset.
h1 parsing functions (h1_parse_msg_*) returns the number of bytes parsed or
0 if nothing is parsed because an error occurred or some data are
missing. But they never return negative values. Thus, instead of a signed
integer, these function now return a size_t value.
The H1 and FCGI muxes are updated accordingly. Note that h1_parse_msg_data()
has been slightly adapted because the parsing of chunked messages still need
to handle negative values when a parsing error is reported by
h1_parse_chunk_size() or h1_skip_chunk_crlf().
The output of "show map/acl" now contains the 'entry_cnt' value that
represents the count of all the entries for each map/acl, not just the
active ones, which means that it also includes entries currently being
added.
The first item inserted into an ebtree will be inserted directly below
the root, which is a simple struct eb_root which only holds two branch
pointers (left and right).
If we try to find a duplicated entry to this first leaf through a
ebmb_next_dup, our leaf_p pointer will point to the eb_root instead of a
complete eb_node so we cannot look for the bit part of our leaf_p since
it would try to cast our eb_root into an eb_node and perform an out of
bounds access when reading "eb_root_to_node(eb_untag(t,EB_LEFT)))->bit".
This bug was found by address sanitizer running on a CRL hot update VTC
test.
Note that the bug has been there since the import of the eb_next_dup()
and eb_prev_dup() function in 1.5-dev19 by commit 2b5702030 ("MINOR:
ebtree: add new eb_next_dup/eb_prev_dup() functions to visit duplicates").
It can be backported to all stable branches.
The following functions used in CA/CRL file hot update were not defined
in OpenSSL 1.0.2 so they need to be defined in openssl-compat :
- X509_CRL_get_signature_nid
- X509_CRL_get0_lastUpdate
- X509_CRL_get0_nextUpdate
- X509_REVOKED_get0_serialNumber
- X509_REVOKED_get0_revocationDate
This patch adds the "set ssl crl-file" and "commit ssl crl-file"
commands, following the same logic as the certificate and CA file update
equivalents.
When trying to update a Certificate Revocation List (CRL) file via a
"set" command, we start by looking for the entry in the CA file tree and
then building a new cafile_entry out of the payload, without adding it
to the tree yet. It will only be added when a "commit" command is
called.
During a "commit" command, we insert the newly built cafile_entry in the
CA file tree while keeping the previous entry. We then iterate over all
the instances that used the CRL file and rebuild a new one and its
dedicated SSL context for every one of them.
When all the contexts are properly created, the old instances get
replaced by the new ones and the old CRL file is removed from the tree.
The CA files and CRL files are stored in the same cafile_tree so this
patch adds a new field the the cafile_entry structure that specifies the
type of the entry. Since a ca-file can also have some CRL sections, the
type will be based on the option used to load the file and not on its
content (ca-file vs crl-file options).
This patch adds the "set ssl ca-file" and "commit ssl ca-file" commands,
following the same logic as the certificate update equivalents.
When trying to update a ca-file entry via a "set" command, we start by
looking for the entry in the cafile_tree and then building a new
cafile_entry out of the given payload. This new object is not added to
the cafile_tree until "commit" is called.
During a "commit" command, we insert the newly built cafile_entry in the
cafile_tree, while keeping the previous entry as well. We then iterate
over all the instances linked in the old cafile_entry and rebuild a new
ckch instance for every one of them. The newly inserted cafile_entry is
used for all those new instances and their respective SSL contexts.
When all the contexts are properly created, the old instances get
replaced by the new ones and the old cafile_entry is removed from the
tree.
This fixes a subpart of GitHub issue #1057.
Adds a way to insert a new uncommitted cafile_entry in the tree. This
entry will be the one fetched by any lookup in the tree unless the
oldest cafile_entry is explicitely looked for. This way, until a "commit
ssl ca-file" command is completed, there could be two cafile_entries
with the same path in the tree, the original one and the newly updated
one.
The updated CA content coming from the CLI during a ca-file update will
directly be in memory and not on disk so the way CAs are loaded in a
cafile_entry for now (via X509_STORE_load_locations calls) cannot be
used.
This patch adds a way to fill a cafile_entry directly from memory and to
load the contained certificate and CRL sections into an SSL store.
CRL sections are managed as well as certificates in order to mimic the
way CA files are processed when specified in an option. Indeed, when
parsing a CA file given through a ca-file or ca-verify-file option, we
iterate over the different sections in ssl_set_cert_crl_file and load
them regardless of their type. This ensures that a file that was
properly parsed when given as an option will also be accepted by the
CLI.
In order for the link between the cafile_entry and the default ckch
instance to be built, we need to give a pointer to the instance during
the ssl_sock_prepare_ctx call.
Each ca-file entry of the tree will now hold a list of the ckch
instances that use it so that we can iterate over them when updating the
ca-file via a cli command. Since the link between the SSL contexts and
the CA file tree entries is only built during the ssl_sock_prepare_ctx
function, which are called after all the ckch instances are created, we
need to add a little post processing after each ssl_sock_prepare_ctx
that builds the link between the corresponding ckch instance and CA file
tree entries.
In order to manage the ca-file and ca-verify-file options, any ckch
instance can be linked to multiple CA file tree entries and any CA file
entry can link multiple ckch instances. This is done thanks to a
dedicated list of ckch_inst references stored in the CA file tree
entries over which we can iterate (during an update for instance). We
avoid having one of those instances go stale by keeping a list of
references to those references in the instances.
When deleting a ckch_inst, we can then remove all the ckch_inst_link
instances that reference it, and when deleting a cafile_entry, we
iterate over the list of ckch_inst reference and clear the corresponding
entry in their own list of ckch_inst_link references.
This patch moves all the ssl_store related code to ssl_ckch.c since it
will mostly be used there once the CA file update CLI commands are all
implemented. It also makes the cafile_entry structure visible as well as
the cafile_tree.
stdint.h is not as portable as inttypes.h. It doesn't exist at least
on AIX 5.1 and Solaris 7, while inttypes.h is present there and does
include stdint.h on platforms supporting it.
This is equivalent to libslz upstream commit e36710a ("slz: use
inttypes.h instead of stdint.h")
On ARM with native CRC support, no need to inflate the executable with
a 4kB CRC table, let's just drop it.
This is slz upstream commit d8715db20b2968d1f3012a734021c0978758f911.
This function was not used anymore after the atomic updates were
implemented in 2.3, and it must not be used given that it does not
yield and can easily make the process hang for tens of seconds on
large acls/maps. Let's remove it before someone uses it as an
example to implement something else!
It's still very difficult to find all commands starting with a given
keyword like "set", "show" etc. Let's sort the lines by usage message,
this is much more convenient.
The build fails on versions older than 1.0.1d which is the first one
introducing CRYPTO_memcmp(), so let's have a define for this instead
of enabling it whenever USE_OPENSSL is set. One could also wonder why
we're relying on openssl for such a trivial thing, and a simple local
implementation could also allow to restore lexicographic ordering.
Some of the Lua doc and a few places still used "Haproxy" or "HAproxy".
There was even one "HA proxy". A few of them were in an example of VTest
output, indicating that VTest ought to be fixed as well. No big deal but
better address all the remaining ones so that these inconsistencies stop
spreading around.
listener-t comes with openssl just due to the SSL_CTX type that is
declred as a typedef in openssl hence cannot be abstracted at this
level. However connection-t.h doen't need all that just to know that
bind_conf is a struct. Let's declare it with other external types
instead..
These ones are used by virtually every config parser. Not only they
provide no benefit in being inlined, but they imply a very deep
dependency starting at proxy.h, which results for example in task.c
including openssl.
Let's move these two functions to cfgparse.c.
These caddr_* functions were once placed into tools.h in the hope they
would be useful but nobody knows they exist. They could deserve being
moved to their own file with other pointer manipulation functions maybe,
but for now they're the only reason left for stick_table.h to include
tools.h, so let's move them directly there since it's its only user.
This allows to remove tools.h from stick_table.h and slightly reduce
the overall build time.
This function has no business being inlined in stick_table.h since it's
only used at boot time by the config parser. In addition it causes an
undesired dependency on tools.h because it uses parse_time_err(). Let's
move it to stick_table.c.
No idea why this was put inlined into connection.h, it's used only once
for haproxy -vv, and requires tools.h, causing an undesired dependency
from connection.h. Let's move it to connection.c instead where it ought
to have been.
Only mworker uses proc_self, and it was declared in global.h, forcing
users of global.h to include mworker and its dependencies.
Moving it to mworker reduces the preprocessed size of version.c from
170 to 125kB by shrinking the number of local includes from 30 to 16
and the number of system includes from 147 to 132.
The presence of this field causes a long dependency chain because almost
everyone includes global-t.h, and vars include sample_data which include
some system includes as well as HTTP parts.
There is absolutely no reason for having the process-wide variables in
the global struct, let's just move them into vars.c and vars.h. This
reduces from ~190k to ~170k the preprocessed output of version.c.
This will allow some fields to be produced with a higher accuracy when
the requester indicates being able to parse floats. Rates and times are
among the elements which can make sense.
Currently the stats filling function knows nothing about the caller's
needs, so let's pass the STAT_* flags so that it can adapt to the
requester's constraints.
For stats reporting it can be convenient to report floats at low rates
instead of discrete integers. We do have quite some precision since we
currently divide counters by number of milliseconds, so we can usually
add 3 digits after the decimal point.
We already had ultoa_r() and friends but nothing to emit inline floats.
This is now done with ftoa_r() and F2A/F2H. Note that the latter both use
the itoa_str[] as temporary storage and that the HTML format currently is
the exact same as the ASCII one. The trailing zeroes are always timmed so
these outputs are usable in user-visible output.
When using "%f" to print a float, it automatically gets 6 digits after
the decimal point and there's no way to automatically adjust to the
required ones by dropping trailing zeroes. This function does exactly
this and automatically drops the decimal point if all digits after it
were zeroes. This will make numbers more friendly in stats and makes
outputs shorter (e.g. JSON where everything is just a "number").
The function is designed to be easy to use with snprint() and chunks:
snprintf:
flt_trim(buf, 0, snprintf(buf, sizeof(buf), "%f", x));
chunk_printf:
out->data = flt_trim(out->area, 0, chunk_printf(out, "%f", x));
chunk_appendf:
size_t prev_data = out->data;
out->data = flt_trim(out->area, prev_data, chunk_appendf(out, "%f", x));
Add a new proxy capability for proxy with load-balancing capabilities.
This help to differentiate listen/frontend/backend with special proxies
such as peer proxies.
Support experimental actions. It is mandatory to use
'expose-experimental-directives' before to be able to use them.
If such action is present in the config file, the tainted status of the
process is updated. Another tainted status is set when an experimental
action is executed.
Define a new keyword flag KWF_MATCH_PREFIX. This is used to replace the
match_pfx field of action struct.
This has the benefit to have more explicit action declaration, and now
it is possible to quickly implement experimental actions.
Add a new flag to mark a keyword as experimental. An experimental
keyword cannot be used if the global 'expose-experimental-directives' is
not present first.
Only keywords parsed through a standard cfg_keywords lists in
global/proxies section will be automatically detected if declared
experimental. To support a keyword outside of these lists,
check_kw_experimental must be called manually during its parsing.
If an experimental keyword is present in the config, the tainted flag is
updated.
For the moment, no keyword is marked as experimental.
This field will be used to add various mechanism to config parsing.
Currently no flag value is implemented. The following commit will
implement experimental keywords.
Add a global flag named 'tainted'. Its purpose is to report various
status about experimental features used for the current process
lifetime.
By default it is initialized to 0. It can be set/retrieve by a couple of
new functions mark_tainted()/get_tainted(). Once a flag is set, it
cannot be resetted.
Currently, no tainted status is implemented, it will be the subject of
the following commits.
The new function split_version() converts a parsable haproxy version to
an array of integers. The function compare_current_version() compares an
arbitrary version to the current one. These two functions were written
by Thierry Fournier in 2013, and are still usable as-is. They will be
used to write config language predicates.
Till now it was only presented in the version output but could not be
consulted outside of haproxy.c, let's export it as a variable, and set
it to an empty string if not defined.
Let's add a few fields to the global struct to store information about
the current file being processed, the current line number and the current
section. This will be used to retrieve them using special variables.
When the abortonclose option is enabled, to be sure to be immediately
notified when a shutdown is received from the client, the frontend
conn-stream must be sure the mux will wait for read events. To do so, the
CO_RFL_KEEP_RECV flag is set when mux->rcv_buf() is called. This new flag
instructs the mux to wait for read events, regardless its internal state.
This patch is required to fix abortonclose option for H1 client connections.
When channel_may_recv() is called for an HTX stream, the HTX version,
channel_htx_may_recv() is called. This patch is mandatory to fix a bug
related to the abortonclose option.
This adds the necessary flags to permit run-time enabling/disabling of
memory profiling. For now this is disabled.
A few words were added to the management doc about it and recalling that
this is limited to certain OSes.
get_sym_curr_addr() will return the address of the first occurrence of
the given symbol while get_sym_next_addr() will return the address of
the next occurrence of the symbol. These ones return NULL on non-linux,
non-ELF, non-USE_DL.
Implement a safe mechanism to close front idling connection which
prevents the soft-stop to complete. Every h1/h2 front connection is
added in a new per-thread list instance. On shutdown, a new task is
waking up which calls wake mux operation on every connection still
present in the new list.
A new stopping_list attach point has been added in the connection
structure. As this member is only used for frontend connections, it
shared the same union as the session_list reserved for backend
connections.
Move the session_list attach point in an anonymous union. This member is
only used for backend connections. This commit is in preparation for the
support of stopping frontend idling connections which will add another
member to the union.
This change means that a special care must be taken to be sure that only
backend connections manipulate the session_list. A few BUG_ON has been
added as special guard to prevent from misuse.
The purpose of this debugging option was to prevent certain pools from
masking other ones when they were shared. For example, task, http_txn,
h2s, h1s, h1c, session, fcgi_strm, and connection are all 192 bytes and
would normally be mergedi, but not with this option. The problem is that
certain pools are declared multiple times with various parameters, which
are often very close, and due to the way the option works, they're not
shared either. Good examples of this are captures and stick tables. Some
configurations have large numbers of stick-tables of pretty similar types
and it's very common to end up with the following when the option is
enabled:
$ socat - /tmp/sock1 <<< "show pools" | grep stick
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753800=56
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753880=57
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753900=58
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753980=59
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753a00=60
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753a80=61
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753b00=62
- Pool sticktables (224 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x753780=55
In addition to not being convenient, it can have important effects on the
memory usage because these pools will not share their entries, so one stick
table cannot allocate from another one's pool.
This patch solves this by going back to the initial goal which was not to
have different pools in the same list. Instead of masking the MAP_F_SHARED
flag, it simply adds a test on the pool's name, and disables pool sharing
if the names differ. This way pools are not shared unless they're of the
same name and size, which doesn't hinder debugging. The same test above
now returns this:
$ socat - /tmp/sock1 <<< "show pools" | grep stick
- Pool sticktables (160 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 7 users, @0x3fadb30 [SHARED]
- Pool sticktables (224 bytes) : 0 allocated (0 bytes), 0 used, needed_avg 0, 0 failures, 1 users, @0x3facaa0 [SHARED]
This is much better. This should probably be backported, in order to limit
the side effects of DEBUG_DONT_SHARE_POOLS being enabled in production.
DragonflyBSD already has an attribute __read_mostly which serves the
same purpose as the one in compiler.h.
No need to be backported as it was added in the current 2.4-dev.
Instead of being able to purge only values older than a specific value,
let's support arbitrary ranges and make pat_ref_purge_older() just be
one special case of this one.
Thanks to the commit "BUG/MINOR: applet: Notify the other side if data were
consumed by an applet", it is no longer necessary to notify the producer when an
applet skips output data. Now, it is the default applet handler responsibility
to take care of that.
Move cpu_map structure outside of the global struct to a global
variable defined in cpuset.c compilation unit. This allows to reorganize
the includes without having to define _GNU_SOURCE everywhere for the
support of the cpu_set_t.
This fixes the compilation with musl libc, most notably used for the
alpine based docker image.
This fixes the github issue #1235.
No need to backport as this feature is new in the current
2.4-dev.
The HTX functions used to add new HTX blocks in a message have been moved to
the header file to inline them in calling functions. These functions are
small enough.
A normalized URI is the internal term used to specify an URI is stored using
the absolute format (scheme + authority + path). For now, it is only used
for H2 clients. It is the default and recommended format for H2 request.
However, it is unusual for H1 servers to receive such URI. So in this case,
we only send the path of the absolute URI. It is performed for H1 servers,
but not for FCGI applications. This patch fixes the difference.
Note that it is not a real bug, because FCGI applications should support
abosolute URI.
Note also a normalized URI is only detected for H2 clients when a request is
received. There is no such test on the H1 side. It means an absolute URI
received from an H1 client will be sent without modification to an H1 server
or a FCGI application.
To make it possible, a dedicated function has been added to get the H1
URI. This function is called by the H1 and the FCGI multiplexer when a
request is sent to a server.
This patch should fix the issue #1232. It must be backported as far as 2.2.
In proxy.c, when process is stopping we try to flush tables content
using 'stktable_trash_oldest'. A check on a counter "table->syncing" was
made to verify if there is no pending resync in progress.
But using multiple threads this counter can be increased by an other thread
only after some delay, so the content of some tables can be trashed earlier and
won't be pushed to the new process (after reload, some tables appear reset and
others don't).
This patch re-names the counter "table->syncing" to "table->refcnt" and
the counter is increased during configuration parsing (registering a table to
a peer section) to protect tables during runtime and until resync of a new
process has succeeded or failed.
The inc/dec operations are now made using atomic operations
because multiple peer sections could refer to the same table in futur.
This fix addresses github #1216.
This patch should be backported on all branches multi-thread support (v >= 1.8)
The compiler cannot guess that tv_sec or tv_usec might have unused
parts, so the multiply by 1000 and the divide by 1000 are both
performed using 64-bit constants to stick to the common type. This is
not needed since we only keep the final 32 bits, let's help the compiler
here by casting these fields to uint. The tv_update_date() code is much
cleaner (48 bytes smaller in the CAS loop) as it avoids some register
spilling at a location where that's really unwanted.
The compilation is currently broken on platform without USE_CPU_AFFINITY
set. An error has been reported by the cygwin build of the CI.
This does not need to be backported.
In file included from include/haproxy/global-t.h:27,
from include/haproxy/global.h:26,
from include/haproxy/fd.h:33,
from src/ev_poll.c:22:
include/haproxy/cpuset-t.h:32:3: error: #error "No cpuset support implemented on this platform"
32 | # error "No cpuset support implemented on this platform"
| ^~~~~
include/haproxy/cpuset-t.h:37:2: error: unknown type name ‘CPUSET_REPR’
37 | CPUSET_REPR cpuset;
| ^~~~~~~~~~~
make: *** [Makefile:944: src/ev_poll.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from include/haproxy/global-t.h:27,
from include/haproxy/global.h:26,
from include/haproxy/fd.h:33,
from include/haproxy/connection.h:30,
from include/haproxy/ssl_sock.h:27,
from src/ssl_sample.c:30:
include/haproxy/cpuset-t.h:32:3: error: #error "No cpuset support implemented on this platform"
32 | # error "No cpuset support implemented on this platform"
| ^~~~~
include/haproxy/cpuset-t.h:37:2: error: unknown type name ‘CPUSET_REPR’
37 | CPUSET_REPR cpuset;
| ^~~~~~~~~~~
make: *** [Makefile:944: src/ssl_sample.o] Error 1
Render numa detection optional with a global configuration statement
'no numa-cpu-mapping'. This can be used if the applied affinity of the
algorithm is not optimal. Also complete the documentation with this new
keyword.
On process startup, the CPU topology of the machine is inspected. If a
multi-socket CPU machine is detected, automatically define the process
affinity on the first node with active cpus. This is done to prevent an
impact on the overall performance of the process in case the topology of
the machine is unknown to the user.
This step is not executed in the following condition :
- a non-null nbthread statement is present
- a restrictive 'cpu-map' statement is present
- the process affinity is already restricted, for example via a taskset
call
For the record, benchmarks were executed on a machine with 2 CPUs
Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz. In both clear and ssl
scenario, the performance were sub-optimal without the automatic
rebinding on a single node.
Allow to specify multiple cpu ids/ranges in parse_cpu_set separated by a
comma. This is optional and must be activated by a parameter.
The comma support is disabled for the parsing of the 'cpu-map' config
statement. However, it will be useful to parse files in sysfs when
inspecting the cpus topology for NUMA automatic process binding.
Create a function thread_cpu_mask_forced. Its purpose is to report if a
restrictive cpu mask is active for the current proces, for example due
to a taskset invocation. It is only implemented for the linux platform
currently.
Use the platform independent type hap_cpuset for the cpu-map statement
parsing. This allow to address CPU index greater than LONGBITS.
Update the documentation to reflect the removal of this limit except for
platforms without cpu_set_t type or equivalent.
Replace the unsigned long parameter by a hap_cpuset. This allows to
address CPU with index greater than LONGBITS.
This function is used to parse the 'cpu-map' statement. However at the
moment, the result is casted back to a long to store it in the global
structure. The next step is to replace ulong in in cpu_map in the
global structure with hap_cpuset.
This module can be used to manipulate a cpu sets in a platform agnostic
way. Use the type cpu_set_t/cpuset_t if available on the platform, or
fallback to unsigned long, which limits de facto the maximum cpu index
to LONGBITS.
As we now embed the library we don't need to support the older 1.0 API
any more, so we can remove the explicit calls to slz_make_crc_table()
and slz_prepare_dist_table().
Now that SLZ is merged, let's update the makefile and compression
files to use it. As a result, SLZ_INC and SLZ_LIB are neither defined
nor used anymore.
USE_SLZ is enabled by default ("USE_SLZ=default") and can be disabled
by passing "USE_SLZ=" or by enabling USE_ZLIB=1.
The doc was updated to reflect the changes.
SLZ is rarely packaged by distros and there have been complaints about
the CPU and memory usage of ZLIB, leading to some suggestions to better
address the issue by simply integrating SLZ into the tree (just 3 files).
See discussions below:
https://www.mail-archive.com/haproxy@formilux.org/msg38037.htmlhttps://www.mail-archive.com/haproxy@formilux.org/msg40079.htmlhttps://www.mail-archive.com/haproxy@formilux.org/msg40365.html
This patch does just this, after minor adjustments to these files:
- tables.h was renamed to slz-tables.h
- tables.h had the precomputed tables removed since not used here
- slz.c uses includes <import/slz*> instead of "slz*.h"
The slz commit imported here was b06c172 ("slz: avoid a build warning
with -Wimplicit-fallthrough"). No other change was performed either to
SLZ nor to haproxy at this point so that this operation may be replicated
if needed for a future version.
This normalizer removes "/./" segments from the path component.
Usually the dot refers to the current directory which renders those segments redundant.
See GitHub Issue #714.
The current "ADD" vs "ADDQ" is confusing because when thinking in terms
of appending at the end of a list, "ADD" naturally comes to mind, but
here it does the opposite, it inserts. Several times already it's been
incorrectly used where ADDQ was expected, the latest of which was a
fortunate accident explained in 6fa922562 ("CLEANUP: stream: explain
why we queue the stream at the head of the server list").
Let's use more explicit (but slightly longer) names now:
LIST_ADD -> LIST_INSERT
LIST_ADDQ -> LIST_APPEND
LIST_ADDED -> LIST_INLIST
LIST_DEL -> LIST_DELETE
The same is true for MT_LISTs, including their "TRY" variant.
LIST_DEL_INIT keeps its short name to encourage to use it instead of the
lazier LIST_DELETE which is often less safe.
The change is large (~674 non-comment entries) but is mechanical enough
to remain safe. No permutation was performed, so any out-of-tree code
can easily map older names to new ones.
The list doc was updated.
Amaury noticed that I managed to break the build of DEBUG_FAIL_ALLOC
for the second time with 207c09509 ("MINOR: pools: move the fault
injector to __pool_alloc()"). The joy of endlessly reworking patch
sets... No backport is needed, that was in the just merged cleanup
series.
By having a pair of dummy pool_get_from_cache() and pool_put_to_cache()
we can remove some ugly ifdefs, so let's do this. We've already done it
for the shared cache.
This function has become too big (251 bytes) and is now hurting
performance a lot, with up to 4% request rate being lost over the last
pool changes. Let's move it to pool.c as a regular function. Other
attempts were made to cut it in half but it's still inefficient. Doing
this results in saving ~90kB of object code, and even 112kB since the
pool changes, with code that is even slightly faster!
Conversely, pool_get_from_cache(), which remains half of this size, is
still faster inlined, likely in part due to the immediate use of the
returned pointer afterwards.
Since pool_get_from_cache() and pool_put_to_cache() were now only wrappers
to the local cache versions which do all the job, let's merge them together
so that there is no more local-cache specific function.
Now when pool_get_from_local_cache() fails, it automatically falls back
to pool_get_from_shared_cache(), which used to always be done in
pool_get_from_cache(). Thus now the API is simpler as we always allocate
and free from/to the local caches.
Till now it used to call it only if there were not too many objects into
the local cache otherwise would send the latest one directly into the
shared cache. Now it always sends to the local cache and it's up to the
local cache to free its oldest objects. From a cache freshness perspective
it's better this way since we always evict cold objects instead of hot
ones. From an API perspective it's better because it will help make the
shared cache invisible to the public API.
These two functions are now responsible for allocating directly from
the cache and releasing to the cache.
Now the pool_alloc() function simply does this:
if cache enabled
return pool_alloc_from_cache() if no NULL
return pool_alloc_nocache() otherwise
and the pool_free() function does this:
if cache enabled
pool_put_to_cache()
else
pool_free_nocache()
For now this only introduces these two functions without changing anything
else, but the goal is to soon allow to make them implementation-specific.
Continuing the unification of local and shared pools, now the usage of
pools is governed by CONFIG_HAP_POOLS without which allocations and
releases are performed directly from the OS using pool_alloc_nocache()
and pool_free_nocache().
There are two levels of freeing to the OS:
- code that wants to keep the pool's usage counters updated uses
pool_free_area() and handles the counters itself. That's what
pool_put_to_shared_cache() does in the no-global-pools case.
- code that does not want to update the counters because they were
already updated only calls pool_free_area().
Let's extract these calls to establish the symmetry with pool_get_from_os()
and pool_alloc_nocache(), resulting in pool_put_to_os() (which only updates
the allocated counter) and pool_free_nocache() (which also updates the used
counter). This will later allow to simplify the generic code.
Calling pool_free_area() inside a lock in pool_put_to_shared_cache() is
a very bad idea. Fortunately this only happens on the lowest end platforms
which almost never use threads or in very small counts.
This change consists in zeroing the pointer once already released to the
cache in the first test so that the second stage knows if it needs to
pass it to the OS or not. This has slightly reduced the length of the
A part of the code cannot be factored out because it still uses non-atomic
inc/dec for pool->used and pool->allocated as these are located under the
pool's lock. While it can make sense in terms of bus cycles, it does not
make sense in terms of code normalization. Further, some operations were
still performed under a lock that could be totally removed via the use of
atomic ops.
There is still one occurrence in pool_put_to_shared_cache() in the locked
code where pool_free_area() is called under the lock, which must absolutely
be fixed.
Now there's one part dealing with the allocation itself and keeping
counters up to date, and another one on top of it to return such an
allocated pointer to the user and update the use count and stats.
This is in anticipation for being able to group cache-related parts.
The release code is still done at once.
Till now it was limited to objects allocated from the OS which means
it had little use as soon as pools were enabled. Let's move it upper
in the layers so that any code can benefit from fault injection. In
addition this allows to pass a new flag POOL_F_NO_FAIL to disable it
if some callers prefer a no-failure approach.
Now the multi-level cache becomes more visible:
pool_get_from_local_cache()
pool_put_to_local_cache()
pool_get_from_shared_cache()
pool_put_to_shared_cache()
The functions were rightfully called from/to_cache when the thread-local
cache was considered as the only cache, but this is getting terribly
confusing. Let's call them from/to local_cache to make it clear that
it is not related with the shared cache.
As a side note, since pool_evict_from_cache() used not to work for a
particular pool but for all of them at once, it was renamed to
pool_evict_from_local_caches() (plural form).
This is exactly what it is, the entry is retrieved from the shared
cache when it is defined. The implementation that is enabled with
CONFIG_HAP_NO_GLOBAL_POOLS continues to return NULL.
Now that __pool_alloc() only surrounds __pool_get_first() with the lock,
let's move it to the only variant that requires it and remove the ugly
ifdefs from the function. This is safe because nobody else calls this
function.
In __pool_alloc(), historically we used to use factor out the
pool's lock between __pool_get_first() and __pool_refill_alloc(),
resulting in real malloc() or mmap() calls being performed under
the pool lock (for platforms using the locked shared pools).
As this is not needed anymore, let's move the call out of the
lock, it may improve allocation patterns on some platforms. This
also makes __pool_alloc() cleaner as we see a first attempt to
allocate from the local cache, then a second from the shared
cache then a reall allocation.
They were strictly equivalent, let's remerge them and rename them to
pool_alloc_nocache() as it's the call which performs a real allocation
which does not check nor update the cache. The only difference in the
past was the former taking the lock and not the second but now the lock
is not needed anymore at this stage since the pool's list is not touched.
In addition, given that the "avail" argument is no longer used by the
function nor by its callers, let's drop it.
This is a first step towards unifying all the fallback code. Right now
these two functions are the only ones which do not update the needed_avg
rate counter since there's currently no shared pool kept when using them.
But their code is similar to what could be used everywhere except for
this one, so let's make them capable of maintaining usage statistics.
As a side effect the needed field in "show pools" will now be populated.
The mem_should_fail() call enabled by DEBUG_FAIL_ALLOC used to be placed
only in the no-cache version of the allocator. Now we can generalize it
to all modes and remove the exclusive test on CONFIG_HAP_NO_GLOBAL_POOLS.
We're going to make the local pool always present unless pools are
completely disabled. This means that pools are always enabled by
default, regardless of the use of threads. Let's drop this notion
of "local" pools and make it just "pool". The equivalent debug
option becomes DEBUG_NO_POOLS instead of DEBUG_NO_LOCAL_POOLS.
For now this changes nothing except the option and dropping the
dependency on USE_THREAD.
Initially per-thread pool caches were stored into a fixed-size array.
But this was a bit ugly because the last allocated pools were not able
to benefit from the cache at all. As a work around to preserve
performance, a size of 64 cacheable pools was set by default (there
are 51 pools at the moment, excluding any addon and debugging code),
so all in-tree pools were covered, at the expense of higher memory
usage.
In addition an index had to be calculated for each pool, and was used
to acces the pool cache head into that array. The pool index was not
even stored into the pools so it was required to determine it to access
the cache when the pool was already known.
This patch changes this by moving the pool cache head into the pool
head itself. This way it is certain that each pool will have its own
cache. This removes the need for index calculation.
The pool cache head is 32 bytes long so it was aligned to 64B to avoid
false sharing between threads. The extra cost is not huge (~2kB more
per pool than before), and we'll make better use of that space soon.
The pool cache head contains the size, which should probably be removed
since it's already in the pool's head.
In commit fb117e6a8 ("MEDIUM: memory: don't let pool_put_to_cache() free
the objects itself") pool_evict_from_cache() was introduced with no
argument, yet the only call place passes it the pool, the pointer and
the index number!
Let's remove these as they even let the reader think that the function
does something specific to the current pool while it's not the case.
This patch renames all existing uri-normalizers into a more consistent naming
scheme:
1. The part of the URI that is being touched.
2. The modification being performed as an explicit verb.
This normalizer merges `../` path segments with the predecing segment, removing
both the preceding segment and the `../`.
Empty segments do not receive special treatment. The `merge-slashes` normalizer
should be executed first.
See GitHub Issue #714.
When a thread ends its harmeless period, we must only consider running
threads when testing threads_want_rdv_mask mask. To do so, we reintroduce
all_threads_mask mask in the bitwise operation (It was removed to fix a
deadlock).
Note that for now it is useless because there is no way to stop threads or
to have threads reserved for another task. But it is safer this way to avoid
bugs in the future.
A previous patch was pushed to fix a deadlock when an isolated thread ends
its harmless period (a9a9e9aac ["BUG/MEDIUM: thread: Fix a deadlock if an
isolated thread is marked as harmless"]). But, unfortunately, the fix is
incomplete. The same must be done in the outer loop, in
thread_harmless_end() function. The current thread must be ignored when
threads_want_rdv_mask mask is tested.
This patch must also be backported as far as 2.0.
This library is required for the subsequent patch which adds
the JSON query possibility.
It is necessary to change the include statement in "src/mjson.c"
because the imported includes in haproxy are in "include/import"
orig: #include "mjson.h"
new: #include <import/mjson.h>
ub64dec and ub64enc are the base64url equivalent of b64dec and base64
converters. base64url encoding is the "URL and Filename Safe Alphabet"
variant of base64 encoding. It is also used in in JWT (JSON Web Token)
standard.
RFC1421 mention in base64.c file is deprecated so it was replaced with
RFC4648 to which existing converters, base64/b64dec, still apply.
Example:
HAProxy:
http-request return content-type text/plain lf-string %[req.hdr(Authorization),word(2,.),ub64dec]
Client:
Token=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyIjoiZm9vIiwia2V5IjoiY2hhZTZBaFhhaTZlIn0.5VsVj7mdxVvo1wP5c0dVHnr-S_khnIdFkThqvwukmdg
$ curl -H "Authorization: Bearer ${TOKEN}" http://haproxy.local
{"user":"foo","key":"chae6AhXai6e"}
Allocation error are now handled in bind_conf_alloc() functions. Thus
callers, when not already done, are also updated to catch NULL return value.
This patch may be backported (at least partially) to all stable
versions. However, it only fix errors durung configuration parsing. Thus it
is not mandatory.
Add the trace support for the checks. Only tcp-check based health-checks are
supported, including the agent-check.
In traces, the first argument is always a check object. So it is easy to get
all info related to the check. The tcp-check ruleset, the conn-stream and
the connection, the server state...
Olivier spotted that I messed up during a rebase of commit 92c059c2a
("MINOR: atomic: implement native BTS/BTR for x86"), losing the x86
version of the BTS/BTR and leaving the generic version for it instead
of having this block in the #else. Since this variant is not used for
now it was easy to overlook it. Let's re-implement it here.
The time initialization was made a bit complex because we rely on a
dummy negative argument to reset all fields, leaving no distinction
between process-level initialization and thread-level initialization.
This patch changes this by introducing two functions, one for the
process and the second one for the threads. This removes ambigous
test and makes sure that the relevant fields are always initialized
exactly once. This also offers a better solution to the bug fixed in
commit b48e7c001 ("BUG/MEDIUM: time: make sure to always initialize
the global tick") as there is no more special values for global_now_ms.
It's simple enough to be backported if any other time-related issues
are encountered in stable versions in the future.
It was only used by freq_ctr and is not used anymore. In addition the
local curr_sec_ms was removed, as well as the equivalent extern
definitions which did not exist anymore either.
update_freq_ctr_period() was still not very clean and didn't wait for
the rotation lock to be dropped before trying again, thus maintaining
the contention at a high level. In addition, the rotation update was
made in three steps, which are not very efficient in terms of bus
cycles.
Here the wait loop was reworked so that the fast path remains short
and that the contended path waits for the lock to be dropped before
attempting another write, but it only waits a relax cycle before
attempting a read. The rotation block was simplified to remove a
test that was already validated by the first loop, and so that the
retrieval of the current period, its reset and its increment are all
performed in a single atomic op and the store to the previous period
is performed immediately after.
All this results in significantly smaller code for the inline function
(~1kB total) and a shorter critical path.
When counters are rotated, there is contention between the threads which
can slow down the operation of the thread performing the rotation. Let's
apply a cpu_relax there to let the first thread finish faster.
It remains cumbersome to preserve two versions of the freq counters and
two different internal clocks just for this. In addition, the savings
from using two different mechanisms are not that important as the only
saving is a divide that is replaced by a multiply, but now thanks to
the freq_ctr_total() unificaiton the code could also be simplified to
optimize it in case of constants.
This patch turns all non-period freq_ctr functions to static inlines
which call the period-based ones with a period of 1 second. A direct
benefit is that a single internal clock is now needed for any counter
and that they now all rely on ticks.
These 1-second counters are essentially used to report request rates
and to enforce a connection rate limitation in listeners. It was
verified that these continue to work like before.
Both structures are identical except the name of the field starting
the period and its description. Let's call them all freq_ctr and the
period's start "curr_tick" which is generic.
This is only a temporary change and fields are expected to remain
the same with no code change (verified).
There was still no function to compute a wait time for periods, let's
implement it on top of freq_ctr_total() as we'll soon need it for the
per-second one. The divide here is applied on the frequency so that it
will be replaced with a reciprocal multiply when constant.
This one is the easiest to implement, it just requires a call and a
divide of the result. Anti-flapping correction for low-rates was
preserved.
Now calls using a constant period will be able to use a reciprocal
multiply for the period instead of a divide.
Most of the functions designed to read a counter over a period go through
the same complex loop and only differ in the way they use the returned
values, so it was worth implementing all this into freq_ctr_total() which
returns the total number of events over a period so that the caller can
finish its operation using a divide or a remaining time calculation. As
a special case, read_freq_ctr_period() doesn't take pending events but
requires to enable an anti-flapping correction at very low frequencies.
Thus the function implements it when pend<0.
Thanks to this function it will be possible to reimplement the other ones
as inline and merge the per-second ones with the arbitrary period ones
without always adding the cost of a 64 bit divide.
Some variables are mostly read (mostly pointers) but they tend to be
merged with other ones in the same cache line, slowing their access down
in multi-thread setups. This patch declares an empty, aligned variable
in a section called "read_mostly". This will force a cache-line alignment
on this section so that any variable declared in it will be certain to
avoid false sharing with other ones. The section will be eliminated at
link time if not used.
A __read_mostly attribute was added to compiler.h to ease use of this
section.
HA_SECTION() is used as an attribute to force a section name. This is
required because OSX prepends "__DATA, " in front of the declaration.
HA_SECTION_START() and HA_SECTION_STOP() are used as post-attribute on
variable declaration to designate the section start/end (needed only on
OSX, empty on others).
For platforms with an obsolete linker, all macros are left empty. It would
possibly still work on some of them but this will not be needed anyway.
