mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-05-08 06:06:11 +02:00
77801f4b64
As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it to the existing board-code "phycore_imx93", and rename that board to "phycore_imx91_93" to reflect the dual SoCs support. While at it, also rename and change common files accordingly. This way i.MX91 and i.MX93 SoC variants of the phyCORE SoM share most of the code and documentation without duplication, while maintaining own device-tree and defconfigs for each CPU variant. Supported features: - 1GB LPDDR4 RAM - Debug UART - EEPROM - eMMC - Ethernet - SD-card - USB Product page SoM: [1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.