Quentin Schulz <quentin.schulz@cherry.de> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/20251120-legacy-led-removal-v1-0-369d44338358@cherry.de
Only short option has been present. Also rename dump_sig
to dump-sig to match with other parameter names.
Fixes: 16abff246b40 ("tools: mkeficapsule: add firmware image signing")
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@mt.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Update the guidance for adding new tests to describe the subdirectory
structure instead of the numbering scheme.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Move the remaining 60 or so test files into an entry/ subdirectory.
These cover general entry types and features: entry args, fill, text,
env, compress, replace, template, collection, ELF, overlap, listing,
sections, symlink, TEE OS, and other miscellaneous entries. Drop the
numeric prefixes and update all references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Move about 20 test files for vendor-specific platform support (TI, NXP
i.MX, Renesas R-Car, Rockchip, PowerPC MPC85xx) into a vendor/
subdirectory. Drop the numeric prefixes and update all references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Move about 10 test files for ChromeOS entries (GBB, vblock, FMAP)
into a cros/ subdirectory. Drop the numeric prefixes and update all
references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Move about 50 test files related to basic layout, packing, alignment,
sections, and image structure into a pack/ subdirectory. Drop the
numeric prefixes from the filenames and update all references in
ftest.py, entry_test.py, and binman_tests.rst
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
U-Boot produces flash.bin as the final boot image when building for
the i.MX95 EVK, but the documentation refers to imx-boot-imx95.bin.
Update the instructions to use flash.bin when copying the image to
the SD card.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
The imx-oei and imx-sm build systems defaults to:
TC_VERSION ?= 14.2.rel1
but the documentation still instructs users to download the 13.3 toolchain.
This causes the build to fail because the expected directory name does
not exist.
Update the documentation to reference the 14.2 toolchain to match the build
system default.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Add support for i.MX952 15x15 lpddr4x board support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Describe build with OpenSBI fw_dynamic.bin path as OPENSBI=<path> on the
same line instead of as an export. Also remedy a typo which had the wrong
directory path before the filename.
Fixes: 8304f3226700 ("doc: board: starfive: update jh7110 common description")
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Describe build with output directory as O=<dir> environment variable
and not unrelated -O <output sync> command line argument.
Fixes: 8304f3226700 ("doc: board: starfive: update jh7110 common description")
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
OrangePi RV is a board that uses the same EEPROM product serial identifier
as the StarFive VisionFive 2 1.3b.
In fact it is not completely compatible with the StarFive VisionFive 2
1.3b for use with Linux Kernel however it is good enough for use with
U-Boot SPL and U-Boot Main. Describe how to set the devicetree search path
and, for advanced users, suggest that it is possible to update the EEPROM
data with an invented "XOPIRV" identifier for automatic board detection.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Neha Malcom Francis <n-francis@ti.com> says:
Typically we do not enable these configs by default but would still like to
have the option to start building them in our default build flow for
testing. Also there is the added advantage of users being able to see what
is needed in case they choose to enable these features.
Link: https://lore.kernel.org/r/20260226122508.2269682-1-n-francis@ti.com
Add sections dedicated to explaining how BIST and inline ECC can be
enabled via the config fragments.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Switch remaining rk3288 boards to upstream devicetree.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi Zero2 is a small single board computer developed by
FriendlyElec, based on the Rockchip RK3528A SoC.
Add support for the FriendlyElec NanoPi Zero2 board.
Features tested on a FriendlyElec NanoPi Zero2 2407:
- SD-card boot
- eMMC boot
- Ethernet
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add Kconfig option OF_SYSTEM_SETUP=y to support booting ROCK 5C Lite
boards with a RK3582 SoC. CPU and GPU cores are failed based on ip-state
and policy.
Tested on a ROCK 5C Lite v1.1:
cpu-code: 35 82
ip-state: 00 80 00 (otp)
ip-state: c0 9e 04 (policy)
remove cpu-map cluster2
fail gpu
fail rkvdec1
fail rkvenc1
fail cpu cpu@600
fail cpu cpu@700
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The hashed-nodes property in a FIT signature node lists which FDT paths
are included in the signature hash. It is intended as a hint so should
not be used for verification.
Add a function to build the node list from scratch by iterating the
configuration's image references. Skip properties known not to be image
references. For each image, collect the path plus all hash and cipher
subnodes.
Use the new function in fit_config_check_sig() instead of reading
'hashed-nodes'.
Update the test_vboot kernel@ test case: fit_check_sign now catches the
attack at signature-verification time (the @-suffixed node is hashed
instead of the real one, causing a mismatch) rather than at
fit_check_format() time.
Update the docs to cover this. The FIT spec can be updated separately.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Closes: https://lore.kernel.org/u-boot/20260302220937.3682128-1-trini@konsulko.com/
Reported-by: Apple Security Engineering and Architecture (SEAR)
Tested-by: Tom Rini <trini@konsulko.com>
Add Kconfig option OF_SYSTEM_SETUP=y to support booting boards with a
RK3582 SoC. CPU and GPU cores are failed based on ip-state and policy.
Tested on a ROCK 5C Lite v1.1:
cpu-code: 35 82
ip-state: 10 00 00 (otp)
ip-state: 30 9e 04 (policy)
remove cpu-map cluster1
rename cpu-map cluster2
fail gpu
fail rkvdec1
fail rkvenc1
fail cpu cpu@400
fail cpu cpu@500
and on a Radxa E52C:
cpu-code: 35 82
ip-state: 00 04 00 (otp)
ip-state: c0 9e 04 (policy)
remove cpu-map cluster2
fail gpu
fail rkvdec1
fail rkvenc1
fail cpu cpu@600
fail cpu cpu@700
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Flashing U-Boot for Exynos 7870 requires creating a stub device tree,
where certain properties and nodes are defined which are populated by
the previous bootloader in the phones.
Since these properties are now available in the U-Boot device tree, it's
now possible to use the same blob generated by U-Boot in place of the
stub, when creating boot images. Update the build documentation to
reflect the same.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
U-Boot for this board is programmed to use the external DTB if an
internal device tree is not available. This makes it safe to build boot
images using the non-DTB U-Boot binary, while taking up less space.
Reflect this change in documentation.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Since there is only one internal device tree allowed in U-Boot, the
DEVICE_TREE flag is required for building images for various devices.
Document it in the build guide.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Rasmus Villemoes <ravi@prevas.dk> says:
Make it possible to update the (whole) bootloader on am335x robustly,
i.e. so that a power failure or random OOM killing of the update
process or other interruptions do not result in a bricked board.
The order the trial bits gets set is somewhat odd, but is clearly what
happens, and somebody else trying to reverse engineer the ROM code has
observed the same thing: See the TracingVectors.ods in
https://github.com/sjgallagher2/am335xbootrom .
Link: https://lore.kernel.org/r/20260129105433.2624686-1-ravi@prevas.dk
Document how one can use the CONFIG_SPL_AM33XX_MMCSD_MULTIPLE option
to implement a scheme for failsafe updating of the whole bootloader on
the am335x.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Select remoteproc related configs for i.MX95 EVK to support manage CM7
using 'rproc' cmd.
Update doc to show details on starting CM7 using rproc cmd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Long ago we took the Linux Kernel documentation about adding a
Signed-off-by line and adjusted it slightly for how we organized things.
In 2003 Linus clarified the intent and then re-worded what the name
portion of the Signed-off-by line can be. Mirror that change here.
Link: https://git.kernel.org/torvalds/c/d4563201f33a
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Our documentation does not require the pip package to build, so it
should not be listed in our requirements.txt file here.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Kuan-Wei Chiu <visitorckw@gmail.com> says:
Add support for the QEMU 'virt' machine on the m68k architecture. The
QEMU virt machine models a generic system utilizing Goldfish virtual
peripherals and is capable of emulating various classic 68k CPUs.
Currently, U-Boot's m68k architecture support focuses on ColdFire
variants. This series expands support to include the classic M680x0
architecture, implementing the necessary exception vectors, startup
code, and a bootinfo parser compatible with the QEMU interface.
Drivers for Goldfish peripherals (TTY, Timer, RTC) and the QEMU
Virtual System Controller (sysreset) are also added to enable serial
console, timekeeping, and system reset functionality.
The implementation has been verified on QEMU targeting the M68040 CPU,
confirming successful hardware initialization and boot to the U-Boot
command shell. Additionally, the CI configuration was verified locally
using gitlab-ci-local "qemu_m68k_virt test.py", resulting in
PASS qemu_m68k_virt test.py.
Link: https://lore.kernel.org/r/20260107201838.3448806-1-visitorckw@gmail.com
[trini: Re-sort MAINTAINERS entries]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add support for the QEMU 'virt' machine on the m68k architecture. This
board emulates a generic machine based on the Motorola 68040 CPU
equipped with Goldfish virtual peripherals.
Introduce the necessary board configuration and initialization
infrastructure. The implementation includes logic to parse the QEMU
bootinfo interface, enabling dynamic detection of system RAM size to
adapt to the virtual machine's configuration.
Enable the Goldfish TTY driver for serial console output. Additionally,
enable Goldfish RTC and timer drivers to support real-time clock
functionality and nanosecond-resolution delays. Include comprehensive
documentation covering build instructions and usage examples.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
- We already have good custodian documentation for patchwork, add a
reference and then link to it here.
- Add a reference to the existing b4 documentation, and reference it
here.
- Note and link to patchwork integration, am/shazam and ty features of
b4 as these are the most likely useful portions. Be specific about
keeping the default ${summary} as that includes important information.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Make use of an anonymous reference for the external link here, per rST
best practices.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Rather than pointing at the source code for b4, point the the official
documentation. Also, use an anonymous reference for the link, per rST
best practices.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Make the "Work flow of a Custodian" section be a subsection of the
Custodians section.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
