Some areas needs to be initialized by using memcpy_toio and memset_io.
Following Linux Kernel commit: 40df0a91b2a5 ("remoteproc: add is_iomem to
da_to_va"), add this to U-Boot.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Enable DFU SF on all i.MX6 DHSOM so the SPI NOR can be exposed via
DFU, and include dfu_alt_info which exposes the full SPI NOR via DFU.
To install new bootloader into the SPI NOR using DFU, it is necessary
to pad the u-boot-with-spl.imx to 0x400 Bytes offset first and then
send it to the board as follows:
"
u-boot=> dfu 0 sf
"
"
host$ dd if=/dev/zero of=pad.bin bs=1024 count=1
host$ cat pad.bin u-boot-with-spl.imx > flash.bin
host$ dfu-util -w -a 0 -D flash.bin
"
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Kory Maincent (TI.com) <kory.maincent@bootlin.com> says:
This series converts the extension board framework to use UCLASS as
requested by Simon Glass, then adds extension support to pxe_utils
and bootmeth_efi (not tested) to enable extension boards devicetree load
in the standard boot process.
I can't test the imx8 extension scan enabled by the
imx8mm-cl-iot-gate_defconfig as I don't have this board.
I also can't test the efi bootmeth change as I don't have such board.
Link: https://lore.kernel.org/r/20251030-feature_sysboot_extension_board-v5-0-cfb77672fc68@bootlin.com
The extension_overlay_cmd environment variable approach is specific to
the U-Boot extension_board command, while other boot flows (pxe_utils,
bootstd) handle overlay loading differently.
Move the extension_overlay_cmd execution out of the core extension
framework to the command level. This decouples the framework from
command-specific behavior and prepares for future extension support
in other boot flows.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Remove the legacy extension board implementation now that all boards
have been converted to use the new UCLASS-based framework. This
eliminates lines of legacy code while preserving functionality
through the modern driver model approach.
Update the bootstd tests, due to the removal of extension hunter.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Introduce UCLASS-based extension board support to enable more
standardized and automatic loading of extension board device tree
overlays in preparation for integration with bootstd and pxe_utils.
Several #if CONFIG_IS_ENABLED are used in cmd/extension_board.c to ease the
development but don't worry they are removed later in the series.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Relocate extension board support from cmd/ to boot/ directory in
preparation for converting the extension framework to use UCLASS.
Also improve code style by applying reverse xmas tree ordering.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
A variety of Qualcomm features/fixes for this cycle, notably with a few
new platforms gaining support:
* Initial support for SDM670 (similar to SDM845), SM6350, and SM7150
platforms is added
* USB and UART issues on MSM8916 are addressed (improving stability/
reliability)
* Firmware loading is implemented for the GENI serial engine, this is
used on some platforms to load firmware for i2c/spi/uart to work
Some additional patches like binman support for building MBN files still
need some additional work.
CI: 8ef6ac07b3/pipelines
Qualcomm peripherals like UART, SPI, I2C, etc are all exposed under a
common GENI Serial Engine wrapper device. Replace the stub driver we use
for this currently with a full-on misc device and implement support for
loading peripheral firmware.
Each of the peripherals has it's own protocol-specific firmware, this is
stored on the internal storage of the device with a well-known partition
type GUID.
To support this, GENI will bind peripherals in two stages. First the
ones that already have firmware loaded (such as the serial port) are
bound in the typical way. But devices that require firmware loading are
deferred until EVT_LAST_STAGE_INIT. At this point we can be sure that
the storage device is available, so we load the firmware and then bind
and probe the remaining children.
Child devices are expected to determine if firmware loading is necessary
and call qcom_geni_load_firmware().
Since Linux currently doesn't support loading firmware (and firmware may
not be available), we probe all GENI peripherals to ensure that they
always load firmware if necessary.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-3-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
Add support for the Toradex SMARC iMX95.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Co-developed-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Co-developed-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reorder the SDHCI_INT_SPACE_AVAIL and SDHCI_INT_DATA_AVAIL flags in the
SDHCI_INT_DATA_MASK definition to match the bit order as defined in the
SDHCI specification and maintain consistency with the register layout.
The functional behavior remains unchanged as this only affects the
order of OR operations in the mask definition.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Some boards have SD card connectors where the power rail cannot be switched
off by the driver. However there are various circumstances when a card
might be re-initialized, such as after system resume, warm re-boot, or
error handling. However, a UHS card will continue to use 1.8V signaling
unless it is power cycled.
If the card has not been power cycled, it may still be using 1.8V
signaling. According to the SD spec., the Bus Speed Mode (function group 1)
bits 2 to 4 are zero if the card is initialized at 3.3V signal level. Thus
they can be used to determine if the card has already switched to 1.8V
signaling. Detect that situation and try to initialize a UHS-I (1.8V)
transfer mode.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Samsung's S2MPU05 PMIC is used by Exynos7870 SoC. It has 5 buck and 38
LDO regulators. Add support for this device variant in the driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In the Linux kernel driver, all information related to LDO and BUCK
regulators are stored in descriptive arrays. This also allows multiple
variants to be supported by the same driver.
Define a struct sec_regulator_desc which holds all values required by a
regulator. Create an array of said struct containing all regulators. The
descriptors are designed to follow a style similar to what's seen in the
Linux driver, so comparing one with the other is simple.
In functions such as s2mps11_{buck,ldo}_{val,mode} these values are to
be used, make necessary modifications to pull them from the descriptors.
Since multiple variants have varying descriptors, select them from
within a switch-case block.
Functions s2mps11_{buck,ldo}_{volt2hex,hex2volt} and arrays
s2mps11_buck_{ctrl,out} are phased out as the calculations are now
hardcoded in descriptors, thusly, it reduces clutter and enhances
readability.
Two macros in s2mps11.h, S2MPS11_LDO_NUM and S2MPS11_BUCK_NUM are
removed as they are no longer being used.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
There are multiple PMICs by Samsung which are similar in architecture
(register layout, interface, etc.) and is possible to be driven by a
single driver. Variant specific code and data should be managed properly
in the driver.
And an enum which describes all supported variants. Pass the enum as the
device driver data. Introduce a switch-case block on the enum for any
variant specific code.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
During a voltage switch command (CMD11, opcode: SD_CMD_SWITCH_UHS18V),
certain hosts tend to stop responding to subsequent commands. This is
addressed by introducing an additional command flag,
DWMCI_CMD_VOLT_SWITCH.
The associated interrupt bit is defined as DWMCI_INTMSK_VOLTSW. This is
set high when a voltage switch is issued, this needs to be waited for
and set to low. Implement the same in the timeout loop. Do note that
since DWMCI_INTMSK_VOLTSW shares the same bit as DWMCI_INTMSK_HTO (bit
10), the interrupt bit needs to be polled for only if the volt switch
command is issued.
DWMCI_CMD_VOLT_SWITCH also needs to be set for subsequent clken commands
after the volt switch. To ensure this, add a boolean member in the host
private struct (herein named volt_switching), which informs if the last
command issued was for volt switching or not.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
These commands are required by struct dm_mmc_ops. Any platform specific
driver may use some or all of the functions in their own ops. Make them
accessible by moving the prototype to the dwmmc.h header.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
There is nothing x86-centric in this include file, and moving it will
allow for some drivers to be compile-tested on sandbox.
Signed-off-by: Tom Rini <trini@konsulko.com>
The function mtd_read_oob_bf is called by cmd/nand.c but does not have a
prototype in any header. Add this to include/linux/mtd/mtd.h as that is
the most logical place currently.
Fixes: 1fac57720719 ("nand: Add a watch command")
Signed-off-by: Tom Rini <trini@konsulko.com>
In this header we make direct references to some dm/device.h functions
while not including the header directly. Add the missing include.
Signed-off-by: Tom Rini <trini@konsulko.com>
This protocol allows an agent to start, stop a CPU or set reset vector.
It is used to manage auxiliary CPUs in an LM (e.g. additional cores in an
AP cluster).
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Add Logical Machine Management(LMM) protocol which is intended for boot,
shutdown, and reset of other logical machines (LM). It is usually used to
allow one LM to manager another used as an offload or accelerator engine.
Following Linux Kernel, created a separate folder for holding vendor
protocol drivers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Preparing to add i.MX LMM and CPU protocol driver, support probe SCMI
vendor ID 0x80(i.MX SCMI LMM ID) and 0x82(i.MX SCMI CPU ID). And use
Kconfig option to support conditional compilation.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
SCMI_IMX_PROTOCOL_ID_MISC was never used, so drop it. And move
SCMI_PROTOCOL_ID_IMX_MISC out of enum scmi_std_protocol to
scmi_nxp_protocols.h, because it is i.MX specific and following Linux
Kernel style, use macro definition.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Add conditional compilation for SCMI protocol support in scmi_get_protocol()
and scmi_add_protocol() based on corresponding Kconfig options. This ensures
that only the enabled protocols are compiled and accessed, and reducing binary
size.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Add the option to load the bootscript with the tftp command (static IP)
instead of the dhcp command (dynamic IP). For this a new function
tftpb_run similar to dhcp_run, is needed. The selection of which command
to use can be done with the ip_dyn environment variable, which can be
set to yes or no. The ip_dyn variable was chosen as it is already in use
on the imx platforms.
Also edit the bootstd doc.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Allow bootmeths to select when they want to run, using the bootdev
priority. Provide a new bootmeth_glob_allowed() function which checks if
a bootmeth is ready to use.
Fix a comment in bootflow_system() which is a test for global bootmeths.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add the logic to scan through the global bootmeths for every new
bootdev, in preparation for allowing global bootmeths to select where in
the hunter ordering they go.
Use a new bootmeth_glob_allowed() function to check if a bootmeth is
allowed, ensuring that each can run at most once.
For now this has no actual effect, since the global bootmeths are
unconditionally processed at the start, with iter->methods_done being
updated to include all of them. Therefore when scanning again, no
unprocessed global bootmeths will be found.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a bitfield which tracks when bootmeths have been used. This will be
needed when global bootmeths can be used later in the iteration.
Fix a missing bootflow_free() while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current 'doing_global' refers to being in the state of processing
global bootmeths. Since global bootmeths are currently used once at the
start, it becomes false once the last global bootmeth has been used.
In preparation for allowing bootmeths to run at other points in the
bootstd interation, add a new 'have_global' flag which tracks whether
there are any global bootmeths in the method_order[] list. It is set up
when iteration starts. Unlike doing_global which resets back to false
after the global bootmeths have been handled, once have_global is set to
true, it remains true for the entire iteration process. This provides a
quick check as to whether global-bootmeth processing is needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current spl_board_fixups API allows for modification of spl_image
before the SPL jumps to it. This can be used to modify the DT for the
next boot stage, however the current API only allows either the machine
arch or the board to use it.
This limits the utility of the API as there might be certain fixups that
should be applied to all boards sharing the same machine architecture
with others being board specific.
For TI's K3 specifically, this prevents us from performing architecture
level fixups since a lot of TI boards are already making use of the
spl_board_fixups API.
Therefore this patch splits the API into two to allow both board and the
architecture specific fixups. The order is kept as arch then board to
give board specific fixups the precedence.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Pull request net-20251022
net:
- airoha: improvements
- Tighten a few more driver dependencies
- designware: fix bitbang init error
- phy: Make driver overloading get_phy_id depend on !COMPILE_TEST
- phy: add paged PHY register accessors
- make dhcp_run() common for NET and NET_LWIP
- dwc_eth_ops: Correct check for FDT_64BIT
- mediatek: mt7988: various fixup + MDIO detach
- phy: aquantia: switch to use phy_get_ofnode(), fix bindings typo
net-legacy:
- bootp: Prevent buffer overflow to avoid leaking the RAM content
- tftp: make TFTP ports unconditionally configurable
misc:
- uthreads: Make use of CONFIG_IS_ENABLED consistently
-----BEGIN PGP SIGNATURE-----
iQFNBAABCgA3FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmj3VvoZHGV1Z2VuLmhy
aXN0ZXZAbGluYXJvLm9yZwAKCRAesx4CDqwvyJOHCACkwHQb0AoreLp8zyyrd/HN
Y0vpClAlu5Bj9Rgj1h8hL3lyVgwrhF5bswJbfXzjHkaWz7skjJLEkC+CVgQosR5f
A+hAk6BKyn1BWz1f8QJ/GKVJqKBpKSTr0Xl1le8kp70gjXT3R0gXQPychNNIKGuA
eywydwKDlCJZYbMjG1jKD/qpjAaD44dhajIoeORC22sWY5Z2ioTSaVjz4d8LJF7T
eKt75qUTmacRMNAmTHaUagqMN7+niN8y2/5krIowW9NkW+Ha+GrtvPjTGTbwX1Aw
UYCp5euFT4LiZoUK9XzG3cgmBPrPNMdHTGHkTk1Nv0TJHX5ENp9wg+lBtHCL/Sjp
=KeQh
-----END PGP SIGNATURE-----
Merge tag 'u-boot-at91-2026.01-a' of https://source.denx.de/u-boot/custodians/u-boot-at91
First set of u-boot-at91 features for the 2026.01 cycle:
This small fixes set includes a change on clocks register value and a
fix for the sam9x60ek default timer.
Synchronize paged PHY helpers with Linux v6.17.
Add support for PHY devices that use paged register access by
implementing the following functions:
- phy_save_page(): Save current page number
- phy_select_page(): Switch to a specific page and return previous page
- phy_restore_page(): Restore previously saved page
Also adds read_page and write_page callbacks to the phy_driver
structure to enable driver-specific page handling.
These helpers allow safe access to paged PHY registers by ensuring
proper page selection and restoration,
even in error conditions, which will be used by the Airoha PHY driver.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
There are currently two implementations of dhcp_run(): one in cmd/net.c
for NET and one in net/lwip/dhcp.c for NET_LWIP. There is no
justification for that. Therefore, move the NET version into
net/net-common.c to be used by both stacks, and drop the NET_LWIP
version which by the way does not look totally correct.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Suggested-by: Tom Rini <trini@konsulko.com>
Acked-by: Benjamin Hahn <B.Hahn@phytec.de>
We do not yet support UTHREADS in xPL phases. However, we have the need
to dummy out certain functions so that xPL can build when full U-Boot
has UTHREADS enabled. Update the few places that need to use
CONFIG_IS_ENABLED so that we have the correct dummy in xPL.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Falcon mode loads a kernel file and an args file which is the
device-tree. However in the case of kernel file being a FIT that
contains the device-tree within it, loading the args file is not
required.
Therefore, this patch introduces a new SPL_OS_BOOT_ARGS config options
that allows us to enable or disable loading of the args file in falcon
mode.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Remove default values for PMC PLL Analog Control Register(ACR) as the
values are specific for each SoC and PLL, so load them from PLL
characteristics structure
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
This partly fix commit 726404a66c773 ("airoha: rework RAM size handling
to support multiple RAM size")
The function get_effective_memsize() do not see non-global defines
of CFG_MAX_MEM_MAPPED, so the effective memory size will not be changed.
Fix the issue by putting definition of CFG_MAX_MEM_MAPPED to the proper
place.
Fixes: 726404a66c773 ("airoha: rework RAM size handling to support multiple RAM size")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Add a few comments about global bootmeths and first_glob_method
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Make all drive names defined with U_BOOT_DRIVER unique
TEE changes:
Rework things such that sandbox will also traverse the optee directory
when SANDBOX_TEE is enabled, but only build one of the optee-specific
files when OPTEE is enabled.
EFI changes:
Up to now we were relying on the file extension to accept and load
an image over HTTP. We expected images to be either .iso or .img.
By wiring up internal existing functions we can try to mount any
file extension and reject it only if mounting fails.
part_driver_lookup_type
-----BEGIN PGP SIGNATURE-----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=6iJS
-----END PGP SIGNATURE-----
Merge tag 'mix-next-14102025' of https://source.denx.de/u-boot/custodians/u-boot-tpm
TPM changes:
Make all drive names defined with U_BOOT_DRIVER unique
TEE changes:
Rework things such that sandbox will also traverse the optee directory
when SANDBOX_TEE is enabled, but only build one of the optee-specific
files when OPTEE is enabled.
EFI changes:
Up to now we were relying on the file extension to accept and load
an image over HTTP. We expected images to be either .iso or .img.
By wiring up internal existing functions we can try to mount any
file extension and reject it only if mounting fails.
part_driver_lookup_type
Make part_driver_lookup_type non-static so it can be used outside
part.c. This allows external callers to determine the appropriate
partition driver for a block device, enabling more flexible handling of
partition types.
Add a prototype and kernel-doc comment in part.h to document the
function contract. Provide a stub inline implementation returning NULL
when partition support is disabled, ensuring build consistency across
configurations.
Signed-off-by: Javier Tia <javier.tia@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Today, only a few platforms enable SPL_LOAD_FIT_FULL, and all enable
SPL_LOAD_FIT. As can be seen in usage, the FULL symbol is a superset of
the first symbol, not an alternative. Update Kconfig entries based on
this and simplify the only code which checks for either being set.
Signed-off-by: Tom Rini <trini@konsulko.com>
dm_eth_phy_connect_interface() is a variant of dm_eth_phy_connect() that
allows to set the used PHY mode, in case the MAC driver needs to fix it
up. The previously static dm_eth_connect_phy_handle() is renamed and
extended for this purpose.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
