Include the overlays.env file and run the apply routine before
booting the Kernel.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
This environment include can be used to boot from a
MMC device for PHYTEC's K3-based SoMs.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Rename existing environment variables according to the bootstd doc.
Renamed variables are fdto_addr, bootenv_addr, fdt_addr.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Rename existing environment variables according to the bootstd doc.
Renamed variables are fdto_addr, bootenv_addr, fdt_addr and
fdt_file.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Include the common overlays env file for phycore_imx93.
The common overlays env file supports disabling loading overlays by
setting the no_overlays variable.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Add support for loading bootenv.txt as well as loading and applying
overlays during boot from mmc and net.
${no_bootenv}: Prevent loading external bootenv.txt environment. Use
${overlays} variable directly from u-boot environment.
${no_overlay}: Do not load overlays defined in ${overlays} variable.
Overlays loaded over the extension command are still
being applied.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
The env scripts for loading and applying overlays are identical for many
PHYTEC Boards. Create a common env that can be included.
The env variables bootenv_addr and fdto_addr are board specific and need
to be set in the board specific file. The env variable get_cmd also
needs to be set in board specific files and can be set to tftp or dhcp.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Manorit Chawdhry <m-chawdhry@ti.com> says:
fdtfile wasn't being populated in these boards in legacy boot using
bootcmd_ti_mmc, migrate these platforms to ti_set_fdt_env.
findfdt is used by bootcmd_ti_mmc by default which used to help populate
the fdtfile. The users of findfdt from bootcmd_ti_mmc have migrated to
ti_set_fdt_env for populating fdtfile; Hence, findfdt can be removed from
bootcmd_ti_mmc having no-impact for any platform.
Remove findfdt to not print out the warning that gets set after calling
ti_set_fdt_env. viz.
"echo WARN: fdtfile already set. Stop using findfdt in script"
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
name_fdt is kept for backward compatibility but it depends on EEPROM
detection logic and some of the TI K3 platforms don't have that anymore
which causes boot failure in legacy boot flow using bootcmd_ti_mmc.
K2g platforms which uses the same file have their own override causing
this change to be no-impact for them.
Replacing name_fdt usage to fdtfile as fdtfile is populated based on
CONFIG_DEFAULT_DEVICE_TREE after using ti_set_fdt_env.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
stdboot and legacy boot depend on fdtfile. Since findfdt is getting
deprecated, move the rest of k3 platforms dependent on findfdt to
ti_set_fdt_env.
Populate fdtfile by calling ti_set_fdt_env in board files.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
By moving the earlycon definition into a dedicated variable, it's
easier to change these values in case the kernel should print on
a different serial interface.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
By moving the earlycon definition into a dedicated variable, it's
easier to change these values in case the kernel should print on
a different serial interface.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Add the rtc command for testing this device. Additionally, add smc
and cache commands to boot non-Linux firmwares on the A53.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Add i2c and rtc commands with all dependencies which are
required for testing.
Additionally, add smc and cache commands to boot Zephyr on the A53.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Vasileios Amoiridis <vassilisamir@gmail.com> says:
This patch adds support to save the bootcount variable in a file located in
FAT filesystem. Up to now, there was support only for EXT filesystem.
The bootcount documentation was using "unattended" while it probably
intending to say "unintended"
Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis@cern.ch>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Add support to save boot count variable in ANY filesystem. Tested with
FAT and EXT.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Philip Oberfichtner <pro@denx.de>
Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis@cern.ch>
On some SoCs, like Qualcomm SoCs, the PSCI cluster power domain
is used by system-wide firmware interfaces to make sure none
of the CPUs are suspended before submitting requests.
While on U-boot we only use the first core and we never
suspend it, the Device Tree still references it and blocks
those nodes to be probed.
Simply bind the PSCI power-domain subnoded to a stub power
domain driver in order to solve the runtime dependencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Nothing really major here, some rework of the SPL PMIC drivers, adding
support for the AXP717 on the way, which is showing up on newer boards
now, most prominently some Anbernic handheld gaming devices. The rest
is enabling Ethernet and SPI boot on the Allwinner V3s SoC, plus two
fixes. This also updates the "traditional U-Boot" DTs to that of kernel
v6.9. I will look into upgrading some SoCs to dts/upstream in the
coming cycle, though this will not cover all SoCs for now, as we carry
some non-mainline fix to improve compatibility with older kernels. Will
see how it goes, but for now we stick with the "old way".
The branch survived the gitlab CI run, and Linux boot testing on some
selected boards.
The driver is trying to read the "spi-max-frequency" property of the
*controller* driver node. There is no such property. The
"spi-max-frequency" property belongs to the SPI devices on the bus.
Right now, the driver will always fall back to the default value of 1MHz
and thus flash reads are very slow with just about 215kb/s.
In fact, the SPI uclass will already take care of everything and we just
have to clamp the frequency to the values the driver/hardware supports.
Thus, drop the whole max_hz handling.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
The BootROM in the Allwinner H616 tries to load the initial boot code
from sector 16 (8KB) of an SD card or eMMC device, but also looks at
sector 512 (256KB). This helps with GPT formatted cards.
A "high" boot offset is also used on previous SoCs, but it's sector 256
(128KB) there instead.
Extend the existing offset calculation code to consider the different
sector offset when running on an H616 SoC. This allows to load U-Boot
on any H616 device when the SPL is not located at 8KB.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
The V3s is identical regarding register layout, clocks and resets to
the sun6i variants. Therefore, we can just add the MACH_SUN8I_V3S to
the sun6i compatible ones.
SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB
SPI flash.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Add the compatible string for the emac found on the V3s SoC. The SoC
only supports the internal PHY. There are no (R)MII signals on any pins.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Add the clock gate registers as well as the reset register bits for the
EMAC and EPHY for the V3s. These are needed by the sun8i network driver.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Sync the devicetree files from the official Linux kernel tree, v6.9.
This is covering Allwinner SoCs with 32-bit and 64-bit ARM cores.
Besides some cosmectic changes, this adds S/PDIF, DMA, and thermal
support to the H616 .dtsi. Nothing that U-Boot needs for itself, but
helpful to pass on to kernels.
This also adds new devicetrees, for some LonganPi H616 board, and the
Remix Mini PC. The latter will get a defconfig next.
As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
