Add support for FudanMicro FM25S01A SPI NAND.
This driver is ported from linux v6.18 and tested on a MT7981 board.
Link: https://lore.kernel.org/linux-mtd/20250824170013.3328777-1-cnsztl@gmail.com/
Reviewed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
The function mtd_read_oob_bf is called by cmd/nand.c but does not have a
prototype in any header. Add this to include/linux/mtd/mtd.h as that is
the most logical place currently.
Fixes: 1fac57720719 ("nand: Add a watch command")
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove default values for PMC PLL Analog Control Register(ACR) as the
values are specific for each SoC and PLL, so load them from PLL
characteristics structure
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
While we declare some of our dummy functions as "inline" we do not also
declare them as "static" and so it is possible for the compiler to
decide to make these as global functions instead. This can lead to link
time failures in some cases, such as "allyesconfig". As these are just
dummy functions, convert them to a macro instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
This series adds significant and valuable work by Mikhail Kshevetskiy to
align spi-mem with Linux 6.16. It also includes contributions to the mtd
performance patches, a work started by Miquel Raynal and improved by
Mikhail Kshevetskiy. Additionally, two patches tighten dependencies on
the Atmel driver.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/27873
This makes the U-Boot SPI NAND driver almost the same as in Linux
6.17-rc1. The only major differences are:
* support of ECC engines. The Linux driver supports different ECC
engines while U-Boot uses on-die ECC only.
* per operation maximum SPI bus frequency
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
There is already a manufacturer hook, which is manufacturer specific but
not chip specific. We no longer have access to the actual NAND identity
at this stage so let's add a per-chip configuration hook to align the
chip configuration (if any) with the core's setting.
This is a port of linux commit
da55809ebb45 ("mtd: spinand: Add a ->configure_chip() hook")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The code was ported from linux-6.15
based on a linux commit c06b1f753bea (mtd: spinand: add OTP support)
created by Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
When the host ECC fails to correct the data error of NAND device,
there's a special read for data recovery method which can be setup
by the host for the next read. There are several retry levels that
can be attempted until the lost data is recovered or definitely
assumed lost.
This is the port of linux commit
f2cb43c98010 (mtd: spinand: Add read retry support)
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The code was ported from linux-6.12. The original continuous reading
support was implemented by Miquel Raynal <miquel.raynal@bootlin.com>
in linux commit 631cfdd0520d (mtd: spi-nand: Add continuous read support).
Here is an original patch description:
--------------------------------------
A regular page read consist in:
- Asking one page of content from the NAND array to be loaded in the
chip's SRAM,
- Waiting for the operation to be done,
- Retrieving the data (I/O phase) from the chip's SRAM.
When reading several sequential pages, the above operation is repeated
over and over. There is however a way to optimize these accesses, by
enabling continuous reads. The feature requires the NAND chip to have a
second internal SRAM area plus a bit of additional internal logic to
trigger another internal transfer between the NAND array and the second
SRAM area while the I/O phase is ongoing. Once the first I/O phase is
done, the host can continue reading more data, continuously, as the chip
will automatically switch to the second SRAM content (which has already
been loaded) and in turns trigger the next load into the first SRAM area
again.
From an instruction perspective, the command op-codes are different, but
the same cycles are required. The only difference is that after a
continuous read (which is stopped by a CS deassert), the host must
observe a delay of tRST. However, because there is no guarantee in Linux
regarding the actual state of the CS pin after a transfer (in order to
speed-up the next transfer if targeting the same device), it was
necessary to manually end the continuous read with a configuration
register write operation.
Continuous reads have two main drawbacks:
* They only work on full pages (column address ignored)
* Only the main data area is pulled, out-of-band bytes are not
accessible. Said otherwise, the feature can only be useful with on-die
ECC engines.
Performance wise, measures have been performed on a Zynq platform using
Macronix SPI-NAND controller with a Macronix chip (based on the
flash_speed tool modified for testing sequential reads):
- 1-1-1 mode: performances improved from +3% (2-pages) up to +10% after
a dozen pages.
- 1-1-4 mode: performances improved from +15% (2-pages) up to +40% after
a dozen pages.
This series is based on a previous work from Macronix engineer Jaime
Liao.
--------------------------------------
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
SkyHigh spinand device has ECC enable bit in configuration register but
it must be always enabled. If ECC is disabled, read and write ops
results in undetermined state. For such devices, a way to avoid raw
access is needed.
Introduce SPINAND_NO_RAW_ACCESS flag to advertise the device does not
support raw access. In such devices, the on-die ECC engine ops returns
error to I/O request in raw mode.
Checking and marking BBM need to be cared as special case, by adding
fallback mechanism that tries read/write OOB with ECC enabled.
This is a port of linux commit
6d9d6ab3a82a (mtd: spinand: Introduce a way to avoid raw access)
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Add two flags for inserting the Plane Select bit into the column
address during the write_to_cache and the read_from_cache operation.
Add the SPINAND_HAS_PROG_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the write_to_cache operation.
Add the SPINAND_HAS_READ_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the read_from_cache operation.
This is a port of linux commit
ca229bdbef29 (mtd: spinand: Add support for setting plane select bits)
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240909092643.2434479-2-linchengming884@gmail.com
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This makes the U-Boot SPI NAND driver almost the same as in Linux 6.10.
The only major difference is support of ECC engines. The Linux driver
supports different ECC engines while U-Boot uses on-die ECC only.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This aligns spinand_wait() with the linux kernel. Instead of calling into
spi_mem_poll_status() which is not implemented in U-Boot, we code the
polling logic and make sure that schedule() is called periodically.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Use an enum to differentiate the type of I/O (reading or writing a
page). Also update the request iterator.
This is a port of linux commit
701981cab016 ("mtd: nand: Add a NAND page I/O request type")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-5-miquel.raynal@bootlin.com
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Make use of the spi-mem direct mapping API to let advanced controllers
optimize read/write operations when they support direct mapping.
Based on a linux commit 981d1aa0697c ("mtd: spinand: Use the spi-mem dirmap API")
created by Boris Brezillon <bbrezillon@kernel.org> with additional
fixes taken from Linux 6.10.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Synchronize upper_NN_bits() and lower_NN_bits() macros with Linux 6.16
commit 118d777c4cb4 ("wordpart.h: Add REPEAT_BYTE_U32()"). This fixes the
lower_32_bits() macros and assures it works with 64bit systems correctly.
This also adds 16bit variants of these macros, which will be used by the
Airoha PHY driver.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Fix the I3C device with spike filter unable to detect issue by setting
tHIGH_INIT to 200ns for first broadcast address.
This is according to MIPI SPEC 1.1.1 for first broadcast address
which is already part of linux upstreamed patch.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Enable driver for Synopsis MIPI DWI3C for the family
device agilex5. This driver is migrated from linux version 6.6.37 LTS
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Rasmus Villemoes <ravi@prevas.dk> says:
I was bitten by our limit macros not being usable in #if conditionals
when building a standalone app. It turns out that the work to fix that
had already been started by the inclusion of the mbedtls library, so
it's something that people do hit.
Let's finish the job by providing suitable limit macros for all three families:
- Standard C types, char, short, ...
- Kernel-style fixed-width types s8, u64, ...
- POSIX/C99 fixed-width types int16_t, uint32_t, ...
Please note that a naive approach like spelling out the full decimal
value for the constants doesn't really work, as there is no such thing
as a "negative integer constant". That is, doing
#define LLONG_MIN -9223372036854775808LL
would lead to the compiler complaining
warning: integer constant is so large that it is unsigned
and the type of that LLONG_MIN would actually be "unsigned long long", so e.g.
#if LLONG_MIN >= 0
#warning "LLONG_MIN is not negative?"
#endif
would fire.
Link: https://lore.kernel.org/r/20250707203655.613340-1-ravi@prevas.dk
Currently, we only have UINT32_MAX and UINT64_MAX in limits.h, and
then stdint.h and kernel.h somewhat randomly define UINT8_MAX and
INT32_MAX, respectively.
Provide a full set of definitions in terms of the min/max macros for
the types that [u]intNN_t are defined in terms of, namely the {s,u}NN
ones.
Try to avoid breaking whatever depended on getting UINT8_MAX from our
compat stdint.h by replacing it with an include of limits.h.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Since we define the {s,u}{8,16,32,64} types the same way on all
architectures, i.e. everybody uses asm-generic/int-ll64.h, we can just
define the associated limit macros in terms of those for the
corresponding types. This eliminates another set of limit macros that
are not usable in #if conditionals.
These type names and macros are not C or POSIX, so there's no language
violation, but certainly a violation of developers' reasonable
expectations.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
In a customer project that was building a stand-alone application, I
hit a problem related to the fact that our LONG_MAX and friends are
not standards-compliant, in that they are not "suitable for use in #if
preprocessing directives"
... /toolchain_none/arm-cortexa8-eabi/sys-include/machine/_default_types.h:25:31: error: missing binary operator before token "long"
25 | || ( defined(LLONG_MAX) && (LLONG_MAX > 0x7fffffff) )
| ^~~~~~~~~
So following up on commit 13de8483388 ("mbedtls: add mbedtls into the
build system"), move the rest of the macros associated to the standard
C types {signed,unsigned} {char, short, int, long, long long} (and of
course bare 'char') to limits.h.
Make use of the fact that both gcc and clang provide suitable
predefined __FOO_MAX__ macros for the signed types, and use a standard
scheme for defining the FOO_MIN and UFOO_MAX macros in terms of
FOO_MAX.
Note that suffixes like L and ULL are allowed for preprocessor
integers; it is (casts) which are not. And using appropriate suffixes,
we can arrange for the type of e.g. UINT_MAX to be "unsigned int" due
to integer promotion rules.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Introduce response and request structs to receive and request
information regarding DM version, etc from TI SCI.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Introduce response and request structs for receiving information
regarding FW/SOC capability from DM. The received capability can
further be used to call certain API's based on the feature supoorted
by the DM firmware.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Rasmus Villemoes <ravi@prevas.dk> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
Link: https://lore.kernel.org/r/20250507121246.518691-1-ravi@prevas.dk
None of the list helpers use prefetch() anymore, and no C code relies
on getting this definition from list.h. In any case, such an arch/cpu
specific thing does not belong in a header that just consists of cpp
helper macros.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
The use of prefetch() in these list helpers was dropped back in 2011
in linux (e66eed651fd1 ("list: remove prefetching from regular list
iterators")). No arch in U-Boot defines any actual prefetch(), and as
the referenced commit says, it's usually not a win anyway.
Whole-sale sync of list.h is not really feasible, but we can
synchronize the macros containing a prefetch() with their linux
implementations as of v6.15-rc5, also importing the various helpers
needed, e.g. list_is_head() and list_next_entry().
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Sync bitfield.h header with Linux 6.15 version. Mainly is to permit the
introduction of FIELD_PREP_CONST. The bug.h header changed to
build_bug.h doesn't cause any regression as we also ship split header
similar to how it's done with in Linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add a new config CONFIG_CLK_AUTO_ID to support a unique clk id
for all the clock providers, managed by clk uclass, when the clock
reference arg[0] is the same.
When the CONFIG is activated, the clock id is limited to the lower
CLK_ID_SZ = 24 bits in default clock xlate function
and the sequence number + 1 of the clk provider device is
added for the 8 higher bits.
We use sequence number + 1 to avoid the "dummy" clock id = 0,
used for invalid clock when CCF is activated.
When this config is activated, the new function clk_get_id()
should be used to get back the internal reference to clock
for the each clock provider.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The kernel added new size definitions and substituted the
boilerplate/reference to the license with a SPDX identifier.
Drop a local SZ_8G definition in MediaTek MT7988 SoC board file.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
At the moment a mixture of ifdef(CONFIG_IS_ENABLED) and
CONFIG_IS_ENABLED(SPI_FLASH_BAR) is used in the spi-nor framework.
This leads to misbehaviour in the SPL as there is no Kconfig option
CONFIG_SPL_SPI_FLASH_BAR. This commit standardizes the use of
CONFIG_SPI_FLASH to get SPLs that load U-Boot proper from the
SPI flash to work again.
Fixes: 9bb02f7 (mtd: spi-nor: Fix the spi_nor_read() when config SPI_STACKED_PARALLEL is enabled)
Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Pass the clock controller udevice into clk_register_composite(),
so it can be passed further to any registered composite clocks
and used for look up of parent clock referenced in DT "clocks"
and "clock-names" properties by phandle and name pair.
Use the clock controller udevice in imx8m_clk_mux_set_parent()
to perform accurate look up of parent clock referenced in the
CCM driver by name. If the clock name that is being looked up
matches one of the names listed in the clock controller DT node
"clock-names" array property, then the offset of the name is
looked up in the "clocks" DT property and the phandle at that
offset is resolved to the parent clock udevice. The test to
determine whether a particular driver instance registered with
clock uclass matches the parent clock is done by comparing the
OF nodes of the clock registered with clock uclass and parent
clock resolved from the phandle.
Example:
drivers/clk/imx/clk-imx8mm.c:
static const char * const imx8mm_a53_sels[] = {"osc_24m", "arm_pll_out", ...
_____________|
arch/arm/dts/imx8mm.dtsi: |
clk: clock-controller@30380000 { v
clock-names = "osc_32k", "osc_24m", ...
|
v
clocks = <&osc_32k>, <&osc_24m>, ...
}; _______________________|
... |
/ { v
osc_24m: clock-osc-24m {
compatible = "fixed-clock";
...
};
Signed-off-by: Marek Vasut <marex@denx.de>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> # imx8mp-beacon
f_acm calls usb_ep_disable(f_acm->ep_notify) unconditionally in
acm_start_ctrl(), even if the USB endpoint was never enabled before. This
causes crashes for some UDC drivers (e.g. ci_udc), because they dereference
data structures that are assigned only after having called usb_ep_enable().
The f_acm driver in U-Boot is similar to the Linux driver, where this issue
does not occur because usb_ep_disable() and usb_ep_enable() internally
track the enabled state. In Linux this change was made in commit
b0bac2581c19 ("usb: gadget: introduce 'enabled' flag in struct usb_ep") by
Robert Baldyga.
Fix the crashes for f_acm by making the same change in U-Boot. This makes
the API less bug-prone and avoids introducing crashes when adapting new
gadget drivers from Linux.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250407-acm-fixes-v1-3-e3dcb592d6d6@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Add reset manager registers in preparation for F2S bridge reset
support as well as the mask support to enable/disable the bridges.
Mask value:
BIT0: soc2fpga
BIT1: lwhps2fpga
BIT2: fpga2soc
These bridges are available only in Stratix10:
BIT3: f2sdram0
BIT4: f2sdram1
BIT5: f2sdram2
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Drop unneeded spi.h header include from spinand.h, nothing included by
spi.h is actually used in this header and .c should correctly included
spi.h if actually needed.
Replace spi.h with linux/bitops.h as this is what is actually required
for spinand.h
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
When FIT image with multiple dtbs are involved for R5 boot process,
R5 SPL starts off with the first instance of dtb to probe the
eeprom, then once we have identified the type of board, invocation
of setup_multi_dtb_fit will replace the gd->fdt_blob with the proper
board dtb match. However, when we do this, two things happen:
a) Prior to the invocation of setup_multi_dtb_fit, as part of the eeprom
discovery process, i2c controller device is already probed and marked
as exclusive with the match of the very first tisci match (from the
original boot dtb). This list is stored in the info->dev_list of the
first probe.
b) When the second dtb is loaded, tisci is probed again (since this is a
new node) and the new info->dev_list is empty.
At this stage, the exclusive devices such as i2c instances used to
probe the board information is left in the old info->dev_list that is
no longer used actively by the system using the replaced dtb.
As a result of this, the cleanup we intend to do with
ti_sci_cmd_release_exclusive_devices is no longer complete and
leaves the instances such as i2c for eeprom marked used as we scan just
the new info->dev_list.
This creates a problem when Device Manager(DM) firmware starts up later
on in the boot process and identifies that this instance of i2c is
already marked active, so it assumes this can no longer be controlled
by software and is marked internally as reserved and HLOS can no
longer control these instances. This defeated the purpose of
ti_sci_cmd_release_exclusive_devices.
NOTE: This scheme works just fine if the FIT has just a single dtb as
the info->dev_list is upto date.
To fix this, let us make ti_sci_cmd_release_exclusive_devices scan the
all registrations of tisci instances and cleanup all exclusive devices
that have ever been registered.
As part of this, change the prototype of release_exclusive_devices to
drop the handle since that has no further meaning now.
Though this issue was identified on AM64-sk, this can be present in
other builds which use multi-fit-dtb for R5 SPL startup.
Fixes: 9566b777ae0a ("firmware: ti_sci: Add a command for releasing all exclusive devices")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Marek Vasut <marex@denx.de> says:
Import exfat-fuse libexfat, add U-Boot filesystem layer porting glue
code and wire exfat support into generic filesystem support code. This
adds exfat support to U-Boot.
Fill in generic filesystem interface for mkdir and rm commands.
Make filesystem tests test the generic interface as well as exfat,
to make sure this code does not fall apart.
Link: https://github.com/relan/exfat/commits/0b41c6d3560d ("CI: bump FreeBSD to 13.1.")
Link: https://lore.kernel.org/r/20250317031418.223019-1-marex@denx.de
Add generic implementation of struct stat {} imported from Linux 6.13.y
commit 27560b371ab8 ("fs: pack struct kstat better"). This can be used
by filesystem code imported from elsewhere. Now struct stat {} becomes
available on all supported architectures.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-fixed-factor registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-divider clock registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-composite registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Enable driver for Cadence NAND for the family
device agilex5. This driver is leveraged from the path
/drivers/mtd/nand/raw/cadence-nand-controller.c from the
stable version 6.11.2.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Implement library function strnstr().
Implement strstr() using strnstr().
Sort the includes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[jf: replace <stdint.h> by <limits.h>, folded from next patch]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
