The code-block directive requires addition of the prompt symbol for each
line, using the prompt directive instead allows for auto insertion of
the symbol per line[1].
For the readers, the character added by the prompt directive is
un-selectable i.e the entire line can be more easily selected for copy
pasting etc. Whereas with code-block, the prompt symbol like "$" is also
selectable which is usually not the intent.
This is mostly a QoL addition + making the docs consistent since k3.rst
makes use of prompt directives which these board docs include from.
[1]: https://pypi.org/project/sphinx-prompt/
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Provide the settings for using the debug UART in SPL.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
To avoid duplicate maintenance just include jh7110_common.rst to describe
the usage of the different boot sources.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Describe building U-Boot for the board and booting.
Carve out common information for JH7110 boards into an include.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Add a minimal generic RK3399 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3399 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add a minimal generic RK3328 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3328 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The ROC-RK3576-PC is a SBC made by Firefly, designed around the RK3576
SoC. This adds the needed board infrastructure and config for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Rockchip RK3576 is a ARM-based SoC with quad-core Cortex-A72
and quad-core Cortex-A53 including 6TOPS NPU, Mali-G52 MC3, HDMI Out,
DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, UFS,
USB OTG 3.0, Type-C, USB 2.0, PCIe 2.1, SATA 3, Ethernet, SDIO3.0, I2C,
UART, SPI, GPIO and PWM.
Add arch core support for it.
Signed-off-by: Xuhui Lin <xuhui.lin@rock-chips.com>
[adapted for mainline u-boot]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Radxa E20C is an ultra-compact network computer with a RK3528A SoC
that offers a wide range of networking capabilities.
Features tested on a Radxa E20C v1.104:
- SD-card boot
- eMMC boot
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add a minimal generic RK3528 board that only have eMMC and SD-card
enabled. This defconfig can be used to boot from eMMC or SD-card on most
RK3528 boards that follow reference board design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
J722S has hw rng, which can be used by OPTEE.
So remove option to use SW TRNG by OPTEE.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
The Tegra Note 7 is a mini tablet computer and the second Tegra 4
based mobile device designed by Nvidia that runs the Android operating
system. The Tegra Note has a 7" IPS display with 1280 x 800 (217 ppi)
resolution. The 1 GB of RAM and 16 GB of internal memory can be
supplemented with a microSDXC card giving up to 64 GB of additional
storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The ASUS Transformer Pad TF701T is an Android tablet computer made by
ASUS, successor to the ASUS Transformer Pad Infinity. The tablet includes
a Tegra 4 T114 processor clocked at 1.9 GHz, and an upgraded 2560×1600
pixel resolution screen, increasing the pixel density to 300 PPI and
a mobile dock. Transformers (t114) board derives from Nvidia Macallan
development board.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Motorola Atrix 4G (MB860) and Droid X2 (MB870) both featured a
dual-core NVIDIA Tegra 2 AP20H processor clocked at 1GHz, coupled with 1GB
of DDR2 RAM. Storage consisted of 16GB of internal flash memory, expandable
via microSD. The display was a 4.0-inch TFT LCD with a resolution of
960x540 pixels (qHD). The devices originally ran on Android up to 2.3
(Gingerbread).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
-----BEGIN PGP SIGNATURE-----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=Ep2x
-----END PGP SIGNATURE-----
Merge tag 'qcom-for-2025.07' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
Add some documentation which attempts to describe Qualcomm smartphone
support with the qcom-phone.config fragment, as well as a high level
debugging guide for diagnosing U-Boot issues when UART and framebuffer
are unavailable.
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Danila Tikhonov <danila@jiaxyga.com> # google-sunfish
Tested-by: Jens Reidel <adrian@mainlining.org> # xiaomi-davinci
Link: https://lore.kernel.org/r/20250331-qcom-phones-v4-4-f52e57d3b8c6@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Remove leftover code from Milk-V Mars CM and Mars CM Lite boards that do
not exist in upstream Linux Kernel devicetree-rebasing. These will be re-
introduced when submitted upstream for a future U-Boot release. Users of
these boards should use the previous stable release of U-Boot until then.
Signed-off-by: E Shattow <e@freeshell.de>
take 2
-----BEGIN PGP SIGNATURE-----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=2n9a
-----END PGP SIGNATURE-----
Merge tag 'qcom-next-20250324' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon into next
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Harrison Mutai <harrison.mutai@arm.com> says:
This patch introduces two updates to the vexpress64 project:
- Disable CRC32 by default to prevent aborts in a standard FVP setup.
- Add a guide for running FVP with TF-A, providing a clear starting point for
users.
Link: https://lore.kernel.org/r/20250304165204.53097-1-harrison.mutai@arm.com
Wadim Egorov <w.egorov@phytec.de> says:
This patch series syncs the phyCORE-AM62Ax feature-wise with our other
K3-based SoMs by adding SoM overlay handling and capsule updates. It
also introduces support for USBDFU boot and includes various minor fixes.
Link: https://lore.kernel.org/r/20250305045838.3614661-1-w.egorov@phytec.de
The previous instructions resulted in a bootloader that wouldn't fit in
an MBR gap. I have updated the docs based on upstream's build process.
Signed-off-by: Baltazár Radics <baltazar.radics@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250110111335.9221-1-baltazar.radics@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Provide a common part for our K3 based boards including general details
about environment handling and EFI capsule updates.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add documentation on how to run FVP with U-Boot and TF-A. This helps
users configure and run U-Boot correctly on Arm models.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB of
internal memory that can be supplemented with a microSDXC card giving up to
128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tom Rini <trini@konsulko.com> says:
This small series separates "bloblist" and "standard passage" to allow
for these similar concepts to explore solutions to problems without
introduces breaking changes to the other.
Link: https://lore.kernel.org/r/20250220000223.1044376-1-raymond.mao@linaro.org
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Harrison Mutai <harrison.mutai@arm.com> says:
This series of patches enhances the vexpress64 platform by enabling bloblist
support. It also introduces support for CONFIG_BLOBLIST_PASSAGE. This is
necessary to boot vexpress64 and other boards without manually specifying a
fixed address and size for the bloblist.
After this change, all the bloblist init modes are supported (i.e., fixed,
alloc, passage) and Vexpress64 boots with CONFIG_BLOBLIST_PASSAGE.
Link: https://lore.kernel.org/r/20250204175844.19890-1-harrison.mutai@arm.com
Enable bloblist on vexpress64 platforms to facilitate information
passing from TF-A using the firmware handoff framework.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Add support for the R-Car S4 Starter Kit with R8A779F4 SoC support.
This implementation natively uses OF_UPSTREAM to pull in most recent
DT. The defconfig is derived from S4 Spider, with reduced UART baud
rate to 921600 Bdps. The DT alias to rswitch is removed as the alias
should point to rswitch ports, not to rswitch itself, see [1].
[1] https://lore.kernel.org/linux-arm-kernel/20250118111344.361617-5-marek.vasut+renesas@mailbox.org/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
U-Boot can be executed in place from a flash device.
Describe how this can be emulated on RISC-V QEMU.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The defconfig name should be: coolpi-cm5-genbook-rk3588_defconfig
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add instructions on how to build and package OP-TEE for the
phycore-imx8mm based boards. The build instructions are identical for
phyGATE-Tauri-L and phyBOARD-Polis.
Also fix missig '-' for TF-A build instructions.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE
integration.
Also add missing '-' to TF-A build instruction while at it.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reading doc/board/google/chromebook_coral.rst we can see that at some
point it was intended to put the bloblist in CAR, rather than DRAM, at
some point during development. This is fine for TPL/SPL stages where we
have very minimal information stored in the bloblist and so we can set
the limit there to 4KiB and then expand it to 196KiB in U-Boot proper so
there's room for ACPI tables and so forth. We also update the
documentation to use the same location for CONFIG_BLOBLIST_ADDR in both
references.
Signed-off-by: Tom Rini <trini@konsulko.com>
ddrbin_tool interface has been changed. Additional chip_name argument
is now required to modify ddr binary file. Update documentation
to be consistent with the new interface.
Update BL31 and ROCKCHIP_TPL file paths to match current version
of binaries available in the rkbin repository.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
