Add the u-boot device-tree include needed to support the
DeepComputing Framework motherboard (FML13V01).
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
SPL and proper U-Boot are split into two images with default binman
configuration of StarFive VisionFive 2, thus proper U-Boot symbols
cannot be found in the SPL image. This fixes errors like
Section '/binman/spl-img': Symbol '_binman_u_boot_any_prop_size'
in entry '/binman/spl-img/mkimage/u-boot-spl/u-boot-spl-nodtb':
Entry 'u-boot-any' not found in list (u-boot-spl-nodtb,
u-boot-spl-dtb,u-boot-spl,mkimage,spl-img)
Fixes: 90602e779d ("riscv: dts: starfive: generate u-boot-spl.bin.normal.out")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Switch to u-boot-nodtb entry which precisely represents a proper U-Boot
and could be matched with u_boot_any. This allows RISC-V ports that make
use of binman to be built without disabling SPL_BINMAN_UBOOT_SYMBOLS
explicitly, which is set to y by default.
Fixes: 0784510f74 ("riscv: sifive: unleashed: Switch to use binman to generate u-boot.itb")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add pinctrl node in device tree and update
in bananapi f3 dts.
Signed-off-by: Huan Zhou <me@per1cycle.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Since commit f98cd471f0 ("clk: clk-composite: Resolve parent clock by
name") the StarFive VisionFive 2 board fails to boot.
Before that patch the SPL debug UART showed warnings like:
clk_register: failed to get pll0_out device (parent of perh_root)
clk_register: failed to get pll0_out device (parent of qspi_ref_src)
clk_register: failed to get pll0_out device (parent of usb_125m)
clk_register: failed to get pll0_out device (parent of gmac_src)
clk_register: failed to get pll0_out device (parent of gmac1_gtxclk)
clk_register: failed to get pll0_out device (parent of gmac0_gtxclk)
The &pllclk clock needs to be enabled early.
Fixes: f98cd471f0 ("clk: clk-composite: Resolve parent clock by name")
Suggested-by: Marek Vasut <marex@denx.de>
Tested-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
As binman already creates nodes based on CONFIG_OF_LIST we don't need to
add extra nodes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> # StarFIve VisionFive 2
Reviewed-by: E Shattow <e@freeshell.de>
JH7110 boards are currently the only use case for multi DTB FIT images
on RISC-V.
Booting JH7110 systems with a VisionFive 2 device-tree used to kind of
work without causing harm to the hardware. But there is no guarantee
that this will hold true in future. So we should not rely on it.
Before the current patch series booting failed on unsupported boards due
to the lack of a device-tree in the binman generated default configuration
when reaching main U-Boot.
By not setting a default configuration booting will now fail on
unsupported boards already in SPL. This allows SPL to
continue with the next boot source for a possible recovery.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Binman can automatically generate device-tree and configuration entries in
the FIT image based on CONFIG_MULTI_DTB_FIT if the binman node includes the
right sub-nodes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Introduced in commit 5a4e0625ac ("riscv: dts: sophgo: Add ethernet
node"), eth_{csrclk,ptpclk} were used as placeholders for ethernet
controller. As the real clock controller has been added, drop them to
clean the devicetree up.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The following diagram illustrates the boot flow for OP-TEE OS
initialization on RISC-V.
(1)-----------+
| U-Boot SPL |
+------------+
|
v
(2)-------------------------------------------------------------+
| OpenSBI (fw_dynamic.bin) |
| (4)------------------------+ |
| | optee dispatcher driver | |
+-----------------+-------^---------|-------+------------------+
M-mode | | |
---------+--[trusted domain]---+----.----+--[untrusted domain]-------
S-mode | (coldboot domain) | | |
v | | v
(3)---------------------------+ |(5)----------------------------+
| OP-TEE OS (tee.bin) | | | U-Boot (u-boot-nodtb.bin) |
+----------------------------+ | +-----------------------------+
| |
| v
|(6)----------------------------+
| | Linux |
| +-----------------------------+
This patch enables the inclusion of the OP-TEE binary within the
U-Boot ITB, allowing it to be loaded to a platform defined address
by U-Boot SPL.
Signed-off-by: Yu-Chien Peter Lin <peter.lin@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Split out StarFive VisionFive2 multi-board target specific configuration
into starfive-visionfive2-binman.dtsi in preparation for removal of
jh7110-u-boot and jh7110-common-u-boot in part or whole as sent upstream.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add basic support for SpacemiT's Banana Pi F3 board.
Update the k1.dtsi align with mainline.
Note that the device tree files follow the mainline Linux source[1].
Links: https://patches.linaro.org/project/linux-serial/patch/20240730-k1-01-basic-dt-v5-8-98263aae83be@gentoo.org/ [1]
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Signed-off-by: Huan Zhou <pericycle.cc@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Add SDHCI and EMMC controlles nodes on TH-1520 SoC. And enable them for
Lichee module 4A.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Support multiple DTBs for JH7110 based boards, so they can
select the correct DT at runtime.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
To support the other JH7110 based boards, add u-boot
device tree for them.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: E Shattow <lucent@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: H Bell <dmoo_dv@protonmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
To support JH7110 based boards besides v1.3B,
add a common dtsi and add common code to it.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Add u-boot features to the U-Boot device tree.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: E Shattow <lucent@gmail.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Enable OF_UPSTREAM to use upstream DT and add starfive/ prefix to
the DEFAULT_DEVICE_TREE. Rename jh7110-starfive-visionfive-2-u-boot.dtsi
to jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi and set the v1.3b
device tree as the default device tree.
Drop redundant DT files from arch/riscv/dts/ and redundant clock and
reset definitions from include/dt-bindings/.
Since the old clock definitions is a little different from those in
upstream Linux, update the clock definitions in clock drivers
accordingly.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Import a slightly modified version of the LicheeRV Nano and SG2002
device trees from the Linux Kernel. The current supported IPs are UART,
MMC, Timer, PLIC and CLINT.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
The commit 7576ab2fac ("riscv: Add support for AMD/Xilinx MicroBlaze V")
added support for 32bit version. 64bit version is also available that's why
wire it up too.
DT is providing description for generic QEMU target.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The U-Boot copy of the mpfs devicetree has, in general, been neglected
somewhat in comparison to the one in Linux. Moving to OF_UPSTREAM to
keep both in sync should serve to eliminate that discrepancy.
Additionally, moving to OF_UPSTREAM will let U-Boot automatically pick
up the devicetree rework that is in progress at [1].
Link: https://lore.kernel.org/all/20241002-private-unequal-33cfa6101338@spud/ [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Align U-Boot with QEMU amd-microblaze-v-virt platform to be able to wire
it with CI.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Padmarao Begari <padmarao.begari@amd.com>
The dtbs: target is almost identical in all architecture Makefiles.
All architecture Makefiles include scripts/Makefile.dts . Deduplicate
the dtbs: target into scripts/Makefile.dts . No functional change.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom, OF_UPSTREAM
AST2700 SoCs integrates a Ibex 32-bits RISC-V core as the boot MCU
for the first stage bootloader execution, namely SPL.
This patch implements the preliminary base to successfully run SPL
on this RV32-based MCU to the console banner message.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Replace device clocks with real clocks from the clock controller, and
remove dummy clocks.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add spi nor flash controller node for cv18xx SoCs
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
xilinx:
- Do not call env_get_location when !ENV_IS_NOWHERE
- Add FDT_FIXUP_PARTITIONS support
- Fix legacy format MAC decoding
zynqmp:
- Enable semihosting SPL support
- DT updates
- Kconfig resort/cleanup
- Don't describe second image/capsule if !SPL
- Add support for dfu/capsule description via MTD
- Support JTAG as alternative boot mode
- Add support for TEG soc variant
zynqmp-kria:
- Wire usb4 boot device
- Update SDIO tristate pin configuration
- Disable SPI_FLASH_BAR to avoid issue with SPI after update
mbv:
- Enable SPL and binman
- Small platform changes
zynqmp-nand:
- Error out in case of unsupported SW ECC
- Clean error path
versal-net:
- Support multiple locations for variables
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZhaRdgAKCRDKSWXLKUoM
IS6LAKCdXJaEtlNLSC5IxeRJGmSTN4xPsACfdVL3mMzOZ1gw2+17uW1kHzzOgM4=
=vDHW
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2024.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2024.07-rc1
xilinx:
- Do not call env_get_location when !ENV_IS_NOWHERE
- Add FDT_FIXUP_PARTITIONS support
- Fix legacy format MAC decoding
zynqmp:
- Enable semihosting SPL support
- DT updates
- Kconfig resort/cleanup
- Don't describe second image/capsule if !SPL
- Add support for dfu/capsule description via MTD
- Support JTAG as alternative boot mode
- Add support for TEG soc variant
zynqmp-kria:
- Wire usb4 boot device
- Update SDIO tristate pin configuration
- Disable SPI_FLASH_BAR to avoid issue with SPI after update
mbv:
- Enable SPL and binman
- Small platform changes
zynqmp-nand:
- Error out in case of unsupported SW ECC
- Clean error path
versal-net:
- Support multiple locations for variables
Previously PLL node was missing from SPL dts. This caused BUS_ROOT
to stay on OSC clock (24Mhz). As a result, all peripherals have to
run at a much lower frequency, and loading from sdcard/emmc is slow.
Thus, enabling PLL node in dts to fix this.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
It appears that there is some timing marginality either in the
board layout or the SoC that results in occasional data corruption
on some boards.
We observed this issue on some of the new HiFive Unmatched RevB
boards during volume production as well as some of the original
HiFive Unmatched boards from 2021 in our possession. This means
that there are other boards out there that might have the issue
too.
We have done some limited testing with DDR4 at 1600MT/s and
faulty boards (failing at 1866MT/s) passed.
We plan further testing after we procure a temperature chamber.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable SPL and binman to generate u-boot.img (machine mode) and u-boot.itb
(supervisor mode). DTB is placed at fixed address to ensure that it is 8
byte aligned which is not ensured when dtb is attached behind SPL binary
that's why SPL and U-Boot are taking DTB from the same address.
Also align addresses for both defconfigs.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/85506bce5580d448f095f267d029e3932c5e9990.1707911544.git.michal.simek@amd.com
Add the axp15060 regulator device. OpenSBI uses this device to perform
board reset and shutdown.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
JH7110 has a power management unit controller node. Add this node.
This device is used by OpenSBI during board reset/shutdown.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Import device tree from Linux kernel to add basic support for CPU, PLIC,
UART and Timer. The name cv1800b in the filename represent the chip used
on Milk-V Duo board.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Extend compatible string to match the latest change in dt binding.
Fixes: 7576ab2fac ("riscv: Add support for AMD/Xilinx MicroBlaze V")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP.
It is hardware compatible with classic MicroBlaze processor.
The patch contains initial wiring and configuration for initial HW design
with memory, cpu, interrupt controller, timers and uartlite console
(interrupt controller is listed but U-Boot is not using it).
Provided DT is just describing one configuration and should be taken only
as example.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Add gpio-restart node to do reset.
Before applied this patch, System Reset Extension doesn't appear with
sbi command.
OpenSBI 1.3
Machine:
Vendor ID 489
Architecture ID 8000000000000007
Implementation ID 4210427
Extensions:
sbi_set_timer
sbi_console_putchar
...[snip]...
IPI Extension
RFENCE Extension
Hart State Management Extension
Performance Monitoring Unit Extension
After applied this patch, System Reset Extension is supported from SBI.
OpenSBI 1.3
Machine:
Vendor ID 489
Architecture ID 8000000000000007
Implementation ID 4210427
Extensions:
sbi_set_timer
sbi_console_putchar
...[snip]...
IPI Extension
RFENCE Extension
Hart State Management Extension
System Reset Extension
Performance Monitoring Unit Extension
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This copies in some devicetree files from the official Linux kernel tree,
v6.6-rc6. It covers a board with the Allwinner T113s SoC, which shares
many devices with its RISC-V sibling, the Allwinner D1(s). This is the
reason for the core .dtsi files landing in the arch/riscv directory.
We are only adjusting the include path to accommodate for the differences
in the U-Boot build system.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add condition for OpenSBI OS boot mode, by default it is not enabled.
By default, binman creates the output file u-boot.itb.
If SPL_OPENSBI_OS_BOOT is enabled, linux.itb will be created
after compilation instead of the default u-boot.itb.
Signed-off-by: Randolph <randolph@andestech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
