The video test here is specific to the sandbox SDL video driver, so only
build it when that is enabled rather than VIDEO is enabled.
Reported-by: Alison Chaiken <alison@she-devel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
uclass_find_next_device always returns 0, so instead make it a void and
update calling sites.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In [0], Andrew noted a code quality issue in the implementation of
blk_find_first and blk_find_next. This led to the observation that the
logic of these functions was also likely incorrect, and based on a quick
check it seemed the functions were unused outside of test code, which
did not exercise the potential failure case, so we felt they should be
removed. In [1], a test patch which illustrates the failure in sandbox
is provided for reference.
Because a more thorough check agrees that these functions are unused,
they are currently incorrect, and fixed/removable flags on block devices
prior to probe are unreliable, just remove these functions instead of
fixing them. All potential users should have used blk_first_device_err
instead anyway.
CI results at [2].
[0] https://patchwork.ozlabs.org/project/uboot/patch/20250714-blk-uclass-v1-1-d21428c5f762@linaro.org/
[1] https://gist.github.com/gmalysa/b05e73a5c14bc18c5741a0e0e06a2992
[2] https://gitlab.com/gmalysa/lnxdsp-u-boot/-/pipelines/1931210857
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Reviewed-by: Andrew Goodbody <andrew.goodbody@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/26607
- Add clock and reset drivers support for STM32MP25
- Add STM32H747-Discovery board support
- Add tamp_nvram driver
- Add SPL support and clock tree init to STM32MP13 RCC driver
- Add STM32MP13xx ram support
- Add support for STM32 Image V2.0 for STM32MP13xx
- Fix SYSRAM size on STM32MP13xx
- Fix DBGMCU macro on STM32MP13xx
- Auto-detect ROM API table on STM32MP15xx
Update the existing test dm_test_clk_ccf() with new CLK_ID macro.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Some of the Python tests are a pain because they don't reset the TPM
state before each test. Driver model tests do this, so convert the
tests to C.
This means that these tests won't run on real hardware, but we have
tests which do TPM init, so there is still enough coverage.
Rename and update the Python tpm_init test to use 'tpm autostart',
since this fully initializes the TPM and performs the self tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Now that env_get_ip() has been removed, the include file <net.h> does
not need anything from <env.h>. Furthermore, include/env.h itself
includes other headers which can lead to longer indirect inclusion
paths. To prepare to remove <env.h> from <net.h> fix all of the
remaining places which had relied on this indirect inclusion to instead
include <env.h> directly.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> # net/lwip
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The include file <command.h> does not need anything from <env.h>.
Furthermore, include/env.h itself includes other headers which can lead
to longer indirect inclusion paths. To prepare to remove <env.h> from
<command.h> fix all of the places which had relied on this indirect
inclusion to instead include <env.h> directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jerome Forissier <jerome.forissier@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Mark Kettenis <kettenis@openbsd.org>
Cc: Masahisa Kojima <kojima.masahisa@socionext.com>
Cc: Mattijs Korpershoek <mkorpershoek@kernel.org>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Stefan Bosch <stefan_b@posteo.net>
Cc: Tien Fong Chee <tien.fong.chee@altera.com>
Cc: Tingting Meng <tingting.meng@altera.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Provide a way to draw an unfilled box of a certain width. This is useful
for grouping menu items together.
Add a comment showing how to see the copy-framebuffer, for testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
When using expo we want to be able to control the information on the
display and avoid other messages (such as USB scanning) appearing.
Add a 'quiet' flag for the console, to help with this.
The test is a little messy since stdio is still using the original
vidconsole create on start-up. So take care to use the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to check the display contents in expo tests, so move the two
needed functions to a new header file.
Rename them to have a video_ prefix.
Signed-off-by: Simon Glass <sjg@chromium.org>
When writing multiple lines of text we need to be able to control which
text goes on each line. Add a new vidconsole_put_stringn() function to
help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Expo needs to be able to word-wrap lines so that they are displayed as
the user expects. Add a limit on the width of each line and support this
in the measurement algorithm.
Add a log category to truetype while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to be able to embed newline characters in the string and
have the text measured into multiple lines. Add support for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the vidconsole API so that measure() can measure multiple lines
of text. This will make it easier to implement multi-line fields in
expo.
Tidy up the function comments while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
CONFIG_VIDEO_COPY implemented a range-based copying mechanism: If we
print a single character, it will always copy the full range of bytes
from the top left corner of the character to the lower right onto the
uncached frame buffer. This includes pretty much the full line contents
of the printed character.
Since we now have proper damage tracking, let's make use of that to reduce
the amount of data we need to copy. With this patch applied, we will only
copy the tiny rectangle surrounding characters when we print them,
speeding up the video console.
After this, changes to the main frame buffer are not immediately copied
to the copy frame buffer, but postponed until the next video device
sync. So issue an explicit sync before inspecting the copy frame buffer
contents for the video tests.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
[Alper: Rebase for fontdata->height/w, fill_part(), fix memmove(dev),
drop from defconfig, use damage.xstart/yend, use IS_ENABLED(),
call video_sync() before copy_fb check, update video_copy test]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/u-boot/20230821135111.3558478-12-alpernebiyasak@gmail.com/
With VIDEO_DAMAGE, the video uclass tracks updated regions of the frame
buffer in order to avoid unnecessary work during a video sync. Enable
the config in sandbox and add a test for it, by printing strings at a
few locations and checking the tracked region.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Adjust test avoid temporary failures in this patch:
Signed-off-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/20230821135111.3558478-8-alpernebiyasak@gmail.com/
With VIDEO_COPY enabled, only the modified parts of the frame buffer are
intended to be copied to the hardware. Add a test that checks this, by
overwriting contents we prepared without telling the video uclass and
then checking if the overwritten contents have been redrawn on the next
sync.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/20230821135111.3558478-4-alpernebiyasak@gmail.com/
The video tests have a helper function to generate a pseudo-digest of
frame buffer contents, but it only does so for the main one. There is
another check that the copy frame buffer is the same as that. But
neither is enough to test if only the modified regions are copied to the
copy frame buffer, since we will want the two to be different in very
specific ways.
Add a boolean argument to the existing helper function to indicate which
frame buffer we want to inspect, and update the existing callers.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/20230821135111.3558478-3-alpernebiyasak@gmail.com/
While checking frame buffer contents, the video tests also check if the
copy frame buffer contents match the main frame buffer. To test if only
the modified regions are updated after a sync, we will need to create
situations where the two are mismatched. Split this check into another
function that we can skip calling, since we won't want it to error on
those mismatched cases.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/20230821135111.3558478-2-alpernebiyasak@gmail.com/
It is very surprising that such an uclass, specifically designed to
handle resources that may be shared by different devices, is not keeping
the count of the number of times a power domain has been
enabled/disabled to avoid shutting it down unexpectedly or disabling it
several times.
Doing this causes troubles on eg. i.MX8MP because disabling power
domains can be done in recursive loops were the same power domain
disabled up to 4 times in a row. PGCs seem to have tight FSM internal
timings to respect and it is easy to produce a race condition that puts
the power domains in an unstable state, leading to ADB400 errors and
later crashes in Linux.
Some drivers implement their own mechanism for that, but it is probably
best to add this feature in the uclass and share the common code across
drivers. In order to avoid breaking existing drivers, refcounting is
only enabled if the number of subdomains a device node supports is
explicitly set in the probe function. ->xlate() callbacks will return
the power domain ID which is then being used as the array index to reach
the correct refcounter.
As we do not want to break existing users while stile getting
interesting error codes, the implementation is split between:
- a low-level helper reporting error codes if the requested transition
could not be operated,
- a higher-level helper ignoring the "non error" codes, like EALREADY and
EBUSY.
CI tests using power domains are slightly updated to make sure the count
of on/off calls is even and the results match what we *now* expect. They
are also extended to test the low-level functions.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Convert the tests to use the do_ping() interface which is now
common to NET and NET_LWIP. This allows running most network test with
SANDBOX and NET_LWIP. A few things to note though:
1. The ARP and IPv6 tests are enabled for NET only
2. The net_retry test is modified to use eth0 (eth@10002000) as the
active (but disabled) interface, and therefore we expect eth1
(eth@10003000) to be the fallback when "netretry" is "yes". This is in
replacement of eth7 (lan1) and eth0 (eth@10002000) respectively.
Indeed, it seems eth7 works with NET by chance and it certainly does not
work with NET_LWIP. I observed that even with NET,
sandbox_eth_disable_response(1, true) has no effect: remove it and
the test still passes. The interface ID is not correct to begin with; 1
corresponds to eth1 (eth@10003000) as shown by debug traces, it is not
eth7 (lan1). And using index 7 causes a SEGV. In fact, it is not the
call to sandbox_eth_disable_response() that prevents the stack from
processing the ICMP reply but the timeout caused by the call to
sandbox_eth_skip_timeout(). Here is what happens when trying to ping
using the eth7 (lan1) interface with NET:
do_ping(...)
net_loop(PING)
ping_start()
eth_rx()
sb_eth_recv()
time_test_add_offset(11000UL);
if (get_timer(0) - time_start > time_delta)
ping_timeout_handler() // ping error, as expected
And the same with NET_LWIP:
do_ping(...)
ping_loop(...)
sys_check_timeouts()
net_lwip_rx(...)
sb_eth_recv()
time_test_add_offset(11000UL);
netif->input(...) // the packet is processed succesfully
By choosing eth0 and sandbox_eth_disable_response(0, true), the incoming
packet is indeed discarded and things work as expected with both network
stacks.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
It is very surprising that such an uclass, specifically designed to
handle resources that may be shared by different devices, is not keeping
the count of the number of times a power domain has been
enabled/disabled to avoid shutting it down unexpectedly or disabling it
several times.
Doing this causes troubles on eg. i.MX8MP because disabling power
domains can be done in recursive loops were the same power domain
disabled up to 4 times in a row. PGCs seem to have tight FSM internal
timings to respect and it is easy to produce a race condition that puts
the power domains in an unstable state, leading to ADB400 errors and
later crashes in Linux.
CI tests using power domains are slightly updated to make sure the count
of on/off calls is even and the results match what we *now* expect.
As we do not want to break existing users while stile getting
interesting error codes, the implementation is split between:
- a low-level helper reporting error codes if the requested transition
could not be operated,
- a higher-level helper ignoring the "non error" codes, like EALREADY and
EBUSY.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This is a new DM core helper. There is now a graph endpoint
representation in the sandbox test DTS, so we can just use it to verify
the helper proper behavior.
Suggested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Simon Glass <sjg@chromium.org> says:
U-Boot can start and boot an OS in both qemu-x86 and qemu-x86_64 but it
is not perfect.
With both builds, executing the VESA ROM causes an intermittent hang, at
least on some AMD CPUs.
With qemu-x86_64 kvm cannot be used since the move to long mode (64-bit)
is done in a way that works on real hardware but not with QEMU. This
means that performance is 4-5x slower than it could be, at least on my
CPU.
We can work around the first problem by using Bochs, which is anyway a
better choice than VESA for QEMU. The second can be addressed by using
the same descriptor across the jump to long mode.
With an MTRR fix this allows booting into Ubuntu on qemu-x86_64
In v3 some e820 patches are included to make booting reliable and avoid
ACPI tables being dropped. Also, several MTTR problems are addressed, to
support memory sizes above 4GB reliably.
Link: https://lore.kernel.org/all/20250315142643.2600605-1-sjg@chromium.org/
When the ACPI tables come from an earlier bootloader it is helpful to
see whether the checksums are correct or not. Add a -c flag to the
'acpi list' command to support that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Free the memory used in tests to avoid a leak. Also unmap the addresses
for sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Rather than having this condition defined separately for each suite,
bracket all options with 'if UNIT_TEST'.
Signed-off-by: Simon Glass <sjg@chromium.org>
This test does not appear to use sandbox's memory-mapped I/O so there is
no need to enable it.
Even if there were a need, it should be disabled at the end of the test,
so as not to affect other tests.
Drop these lines from the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
The current method of running unit tests relies on subcommands of the
ut command. Only the code in each subcommand knows how to find the tests
related to that subcomand.
This is not ideal and we now have quite a few subcommands which do
nothing but locate the relevant tests in a linker list, then call a
common function to run them.
This series adds a list of test suites, so that these subcommands can be
removed.
An issue with 'ut all' is that it doesn't record how many tests failed
overall, so it is necessary to examine copious amounts of output to look
for failures. This series adds a new 'total' feature allow recording the
total number of failed tests.
To help with 'ut all' a new pytest is created which runs it (as well as
'ut info') and makes sure that all is well. Due to the 'ut all' failures
this does not pass, so the test is disabled for now. It is here because
it provides security against misnaming a test suite and causing it not
to run.
Future work may:
- get 'ut all' passing
- enable test_suite() in CL, to ensure that 'ut all' keeps passing
- record duration of each suite
- allow running the tests in random order to tease out dependencies
- tweak the output to remove common prefixes
- getting rid of bootstd, optee and seame 'ut' subcommands
Link: https://lore.kernel.org/r/20250120212613.516664-1-sjg@chromium.org
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites have a different name from that used in the linker list.
That makes it hard to programmatically match the name printed when the
suite runs to the linker-list name it has.
Update the names so they are the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
The ofnode_find_subnode() function currently processes things two
different ways, so the treatment of unit addresses differs depending on
whether OF_LIVE is enabled or not.
Add a new version which uses the ofnode API and add a test to check that
unit addresses can be matched correctly. Leave the old function in place
for the !OF_LIVE case, to avoid a code-size increase, e.g. on
firefly-rk3288
Signed-off-by: Simon Glass <sjg@chromium.org>
When a unit-address is provided, use it to match against the node
name.
Since this increases code size, put it into a separate function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Raymond Mao <raymond.mao@linaro.org> says:
Motivations for changes:
Current SMBIOS library and command-line tool is not fully matching with
the requirements:
1. Missing support for other mandatory types (#7, #9, #16, #17, #19).
2. Only a few platforms support SMBIOS node from the device tree.
3. Values of some fields are hardcoded in the library other than fetching
from the device hardware.
4. Embedded data with dynamic length is not supported (E.g. Contained
Object Handles in Type #2 and Contained Elements in Type #3)
Changes:
1. Refactor the SMBIOS library and command-line tool to better align with
the SMBIOS spec.
2. Create an arch-specific driver for all aarch64-based platforms to fetch
SMBIOS private data from the device hardware (processor and cache).
3. Create a sysinfo driver to poppulate platform SMBIOS private data.
4. Add generic SMBIOS DTS file for arm64 platforms for those common strings
and values which cannot be retrieved from the system registers.
Vendors can create their own SMBIOS node using this as an example.
For those boards without SMBIOS nodes, this DTS file can be included to
have a generic SMBIOS information of the system.
5. Add support for Type #7 (Cache Information) and link its handles to
Type #4.
6. To minimize size-growth for those platforms which have not sufficient
ROM spaces or the platforms which don't need detailed SMBIOS
information, new added fields are only being built when kconfig
GENERATE_SMBIOS_TABLE_VERBOSE is selected.
Once this patch is acceptted, subsequent patch sets will add other missing
types (#9, #16, #17, #19).
Tests:
To test this with QEMU arm64, please follow the guide on dt_qemu.rst to
get a merged DT to run with.
```
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb
cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | grep -v /dts-v1/) \
| dtc - -o merged.dtb
qemu-system-aarch64 -machine virt -nographic -bios u-boot.bin \
-dtb merged.dtb
```
Link: https://lore.kernel.org/r/20241206225438.13866-1-raymond.mao@linaro.org
