SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
Update documents 'README.fdt-control' reference to replacement 'control.rst':
doc/arch/nios2.rst
dts/Makefile
Also convert some adjacent pathname mentions to rST links where applicable
Fixes: 3e9fddfc4f14 "doc: Move devicetree control doc to rST"
Signed-off-by: E Shattow <e@freeshell.de>
It can be unclear to contributors what to do if they haven't gotten any
feedback on patches they have submitted. Add a sentence saying that if
they feel it's been too long without any comment, it's OK to reply
again.
Signed-off-by: Tom Rini <trini@konsulko.com>
The commit 284ef1bbcefc ("doc: memory: Add documentation for system
RAM") added documentation for U-Boot's memory usage along with diagrams
showcasing the SPL's memory usage. Although the SVGs for the diagrams
were improperly encoded.
Therefore, this patch fixes the older SVGs with one's with better
encoding and reduced size created using inkscape[1].
[1]: https://inkscape.org/
Reported-by: Alexander Dahl <ada@thorsis.com>
Fixes: 284ef1bbcefc ("doc: memory: Add documentation for system RAM")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Since commit 5cf6a06a it is possible to have both text-based and
old-style C environment files. But so far the environment documentation
has not reflected this change. This commit fixes that.
Signed-off-by: Ricardo Simoes <ricardo.simoes@pt.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Create doc/usage/filesystems/ section.
Convert doc/README.ext4 to rST format and move it to the new section.
Update documentation to add configuration instruction for Ext4 Write
when using large partitions.
Note that this patch depends on this previous patch:
https://patchwork.ozlabs.org/project/uboot/patch/20250910215702.15576-1-mibodhi@gmail.com/
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
We currently document this command in doc/usage/cmd/itest.rst and this
documentation is more comprehensive than the older README file. Delete
the older file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When applying the patch that became commit a2d881f5bcd3 ("doc: memory:
Add documentation for system RAM") one of the diagrams was missed.
Re-add this missing file.
Reported-by: Adriano Carvalho <adrianocarvalho.pt@gmail.com>
Fixes: a2d881f5bcd3 doc: memory: Add documentation for system RAM
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
[trini: Take Neha's original svg and re-apply it]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add board-level code and defconfig for the i.MX943 EVK board, supporting
multiple SOM variants: 19x19 LPDDR5, 19x19 LPDDR4 and 15x15 LPDDR4.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
OP-TEE configs are enabled by default, change the doc to no longer
declare OP-TEE as optional. Also remove CFG_TEE_BENCHMARK as it is no
longer present in optee_os.
Further, phycore-imx8mm and imx8mm-phygate-tauri-l use different build
instructions, so dissolve the common file for building OP-TEE.
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Allow to flash a board using NXP UUU utility:
- Enable fastboot support on USB.
- Add fastboot partition aliases with names used by UUU. Also add extra
environment variables used by UUU.
- Set 'dofastboot' environment variable based on boot device
configuration, allowing to automatically enter fastboot when booting
from USB.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Add documentation to support the addition of the MPFS Video Kit.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
With the upcoming additions of new MPFS boards, separate common
documentation to allow this to be reused appropriately and avoid
duplication.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This patch is used to restore support for i.MX95 A0 silicon. To avoid
duplicating defconfig, imx95.config is added and can be shared between
imx95_a0_19x19_evk_defconfig and imx95_19x19_evk_defconfig.
container.cfg and imximage.cfg are used to created .cfgout files that
are be passed to mkimage with -n to build flash.bin. Now they have been
deleted and replaced by adding their content to properties of node which
type is nxp-imx9image under binman node.
Fixes: 9936724aa9b ("imx95_evk: Add i.MX95 B0 support")
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> # imx95-19x19-evk (rA0)
Javier Tia <javier.tia@linaro.org> says:
This patch series modernizes U-Boot's code formatting infrastructure by
with current Linux kernel practices and providing a more robust and
comprehensive formatting solution.
Link: https://lore.kernel.org/r/20250905205349.127333-1-javier.tia@linaro.org
The U-Boot coding style guide has been updated to include information
about using the `.clang-format` configuration file for automatic code
formatting. This ensures consistent formatting across the entire
codebase and aligns with Linux kernel coding standards. The goal with
introducing a predefined coding style is consistency rather than
personal preference.
The .clang-format file is copied directly from the Linux kernel without
any modifications, ensuring complete compatibility with kernel coding
standards.
Include comprehensive best practices for using clang-format,
specifically guidance on formatting only changed blocks versus entire
files, creating separate formatting-only commits for better code review,
and leveraging git clang-format for targeted formatting. Add examples of
editor integrations. This enhancement will help maintainers and
contributors to easily adhere to U-Boot coding standards.
Signed-off-by: Javier Tia <javier.tia@linaro.org>
Introduce two new parameters to be used with mkimage -f auto to bundle
TFA BL31 image into fitImage, using auto-generated fitImage. Add -y to
specify TFA BL31 file name and -Y to specify TFA BL31 load and entry
point address. This is meant to be used with systems which boot all of
TFA BL31, Linux and its DT from a single fitImage, all booted by U-Boot.
Example invocation:
"
$ mkimage -E -A arm64 -C none -e 0x50200000 -a 0x50200000 -f auto \
-d arch/arm64/boot/Image \
-b arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dtb \
-y ../tfa/build/rcar_gen4/release/bl31.bin -Y 0x46400000 \
/path/to/output/fitImage
"
Documentation update and test are also included, the test validates
both positive and negative test cases, where fitImage does not include
TFA BL31 and does include TFA BL31 blobs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add new imx8mp-libra-fpsc board.
Bootph tags as well as USB device tree nodes are in u-boot.dtsi for now
and will be removed when upstreamed.
The Libra i.MX 8M Plus FPSC is a single board computer. It uses an i.MX
8M Plus FPSC [1] System on Module which utilizes the FPSC standard [2].
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-8m-plus-fpsc
[2] https://www.phytec.eu/en/produkte/system-on-modules/fpsc
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
These are fixes to what looks like obvious typos.
Some minor improvments are also included, such as:
- Write "symbolic link" instead of symlink
- Correct capitalization for LLVM (all caps)
- Remove dead link and surrounding sentence
Signed-off-by: Adriano Carvalho <adrianocarvalho.pt@gmail.com>
ArmSoM-Sige5 adopts the second-generation 8nm high-performance AIOT
platform Rockchip RK3576, with a 6 TOPS computing power NPU and support
for up to 16GB of large memory. It supports 4K video encoding and
decoding, offers rich interfaces including dual gigabit Ethernet ports,
WiFi 6 & BT5, and various video outputs.
Features tested on a ArmSoM Sige5 v1.1:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe NVMe
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add a minimal generic RK3576 board that only have eMMC, SDMMC and USB
OTG enabled. This defconfig can be used to boot from eMMC or SD-card on
most RK3576 boards that follow reference board design.
eMMC and SD-card boot tested on:
- ArmSoM CM5
- ArmSoM Sige5
- FriendlyElec NanoPi M5
- Luckfox Omni3576
- Toybrick TB-RK3576D
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The GameForce Ace is an RK3588S based handheld gaming device.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The existing compatible name for U-Boot's k3 system controller driver
i.e "ti,am625-system-controller" has been added to linux[1] device-tree.
This compatible in kernel is meant for configuring the Control Module
registers (CTRL_MMR0).
However in U-Boot, the matching driver was being used to load the system
firmware on the secure M-cores by the R5 SPL and therefore must be
updated to a different compatible to avoid conflicts.
Therefore, this patch renames all references of the compatible to
"ti,am654-tisci-rproc-r5". The "-r5" is appended so as to avoid any
future conflicts since r5 specific compatibles should only be useful for
U-Boot.
[1]: 5959618631fe ("dt-bindings: mfd: ti,j721e-system-controller: Add compatible string for AM654")
https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Surface 2 is a Surface-series Windows RT hybrid tablet computer created by
Microsoft. Surface 2 uses a 1.7 GHz quad-core Nvidia Tegra 4 chipset with
2 GB of RAM, features 10.6 inch FullHD ClearType HD screen with 16:9 aspect
ratio and 32/64 GB of internal memory that can be supplemented with a
microSDXC card giving up to 64 GB of additional storage.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Introduce the DNS Kconfig symbol so that various network commands may
use host names without the dns command (CMD_DNS) being selected.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: E Shattow <e@freeshell.de>
Add documentation for Voyager board.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Documentation:
* Describe running U-Boot as a pflash image on RISC-V QEMU
* Correct the description of the bootph-verify device-tree property
UEFI:
* In mkeficapsule fix a resource leak in read_bin_file()
* Support loading a Linux initial RAM disk with the bootefi command.
-----BEGIN PGP SIGNATURE-----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=EYD3
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-10-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-10-rc2
Documentation:
* Describe running U-Boot as a pflash image on RISC-V QEMU
* Correct the description of the bootph-verify device-tree property
UEFI:
* In mkeficapsule fix a resource leak in read_bin_file()
* Support loading a Linux initial RAM disk with the bootefi command.
use the new email address for community work.
While at it, cleanup git shortlog output, by adding
fixes in .mailmap
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Fix typo: change 'TPL' to 'VPL'.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It is sometimes useful to be able to boot via EFI using a Linux initrd.
Add support for this.
Fix a 'specifiy' typo while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Bryan Brattlof <bb@ti.com> says:
The AM62Ax was created right when TI was shifting to their high security
(HS-FS and HS-SE) processes. During this transition a small subset of
AM62A parts where configured to use the old "GP" security for internal
and for select groups of partners but never sold for the wider public.
To help simplify the build and to avoid any confusion of which security
configurations are supported going forward remove the GP builds for the
AM62A SoCs.
Link: https://lore.kernel.org/r/20250729-no-62a-gp-v1-0-1dbdb4469ad3@ti.com
The AM62Ax SoC family was the last part from TI to support the GP
security variant, however this security variant was used mostly
internally and with select early partners and never sold publicly.
To simplify things and to avoid any confusion of which parts are
supported in the future, remove the GP tiboot3.bin builds from binman.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Enable i3c general uclass driver. This uclass driver will have
genaral read and write api to call the specific i3c driver.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
