Add support for PCIe clocks required to enable PCIe support on
iMX8MP SoC.
Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Add APIs to set a firmware_name to a rproc and boot the rproc with the
same firmware.
Clients can call rproc_set_firmware() API to set firmware_name for a rproc
whereas rproc_boot() will load the firmware set by rproc_set_firmware() to
a buffer by calling request_firmware_into_buf(). rproc_boot() will then
load the firmware file to the remote processor and start the remote
processor.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
The K3 J721S2 SoCs have two C71x DSP subsystems in MAIN voltage domain,
and there are no C66x DSP subsystems on these SoCs. The C71x DSP subsystem
is a slighly updated version of the C71x DSP subsystem on J721e. The
C71x DSPs are 64 bit machine with fixed and floating point DSP
operations.
Extend support to the C71x DSPs with J721S2 compatible strings.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
The K3 J721S2 SoCs have three dual-core R5F subsystems, one in MCU
voltage domain and the other two in MAIN voltage domain. These R5F
clusters are similar to the R5F clusters in J7200 SoCs.
Compatible Info is updated to support J721S2 SoCs.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Increase the SPL_STACK_R_MALLOC_SIMPLE_LEN to 0x200000 to accommodate the
size of tispl.bin fit image. With the recent upgrade of ti-linux-firmware
from version v9.1.0 to v9.2.5, the size of tispl.bin fit image has
increased to 1.4MB, causing allocation errors in the R5 SPL:
```
alloc space exhausted
Could not get FIT buffer of 1325056 bytes
check CONFIG_SPL_SYS_MALLOC_SIZE
```
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
The Linaro mail address is not valid anymore.
Cc: kojima.masahisa@socionext.com
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Masahisa Kojima <kojima.masahisa@socionext.com>
The lowest speed grade of Toradex AM62 SoMs is K speed, resulting in a
max value of 800MHz for the CPU operating frequency. A solution with
runtime selection of the CPU frequency is already planned to avoid these
kinds of problems in the future.
Fixes: 8fb8a6d49977 ("arm: dts: k3-am625-verdin-r5:Change CPU frequency to 1000MHz")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
the apalis-imx8qm board no longer boots.
The reason is that the imx8qm clock driver does not handle the
LPUART IPG clocks inside get_rate(), set_rate() and enable() functions.
Fix the boot regression by adding the LPUART IPG entries.
Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
the colibri-imx8qxp board no longer boots.
The reason is that the imx8qxp clock driver does not handle the
LPUART IPG clocks inside get_rate(), set_rate() and enable() functions.
Fix the boot regression by adding the LPUART IPG entries.
Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
Acked-by: Sean Anderson <seanga2@gmail.com>
mach Kconfig file select some options independently of if SPL is actually
enabled. It ends up in situation that SPL is disabled but symbols are still
present in .config. That's why add SPL dependency for them but also group
them with other SPL options in ARCH_ZYNQMP fragment with using imply
option. This should ensure the same behavior as default y.
Also fixed SPL_ZYNQMP_PSU_INIT_ENABLED for the same.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/8dc4b799d36f963a3e1ebb5b24793632dc360b61.1710258674.git.michal.simek@amd.com
Enable saving variables to MMC(FAT) and SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).
Enable ENV_FAT_DEVICE_AND_PART="0:auto" for versal-net platform as well.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240312113421.7394-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
UFS storage often uses a 4096-byte sector size, add support for dynamic
sector sizes based loosely on the Linux implementation.
Support for dynamic sector sizes changes the types used in some
divisions, resulting in the compiler attempting to use
libgcc helpers (__aeabi_ldivmod).
Replace these divisions with calls to lldiv() to handle this correctly.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240320-b4-qcom-usb-v4-4-41be480172e1@linaro.org
[mkorpershoek: squashed the lldiv() fix from caleb]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To actually use the gadget the peripheral driver must be probed and we
must call g_dnl_clear_detach(). Otherwise acm_stdio_start() will always
fail to find a UDC on DT platforms.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240320-b4-qcom-usb-v4-3-41be480172e1@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Documentation:
* Avoid short reference link names in device-tree documentation.
UEFI/Video:
* Support code page 437 code points 1 - 31 used by GRUB
-----BEGIN PGP SIGNATURE-----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=reSt
-----END PGP SIGNATURE-----
Merge tag 'efi-next-20240321' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20240321
Documentation:
* Avoid short reference link names in device-tree documentation.
UEFI/Video:
* Support code page 437 code points 1 - 31 used by GRUB
The "Series-patchwork-url:" tag description says that it overrides the
settings file but doesn't specify the name of the setting. Elsewhere
in the documentation about the "useful" settings we see a setting that
sounds promising called "patchwork_server" that's actually not a valid
setting. It should be "patchwork_url".
Fix these problems so the doc is right and more useful.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
If bootefi selftest is executed and a problem with the device-tree
installation occurs, efi_install_fdt() writes sensible error messages.
It never returns EFI_INVALID_PARAMETER. It neither makes sense to check
for EFI_INVALID_PARAMETER nor to show the usage help for the bootefi
command in this case.
Fixes: 296faf4f7ef1 ("cmd: bootefi: re-organize do_bootefi()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
If an EFI binary returns an error code EFI_INVALID_PARAMETER, we show the
usage help for the bootefi command:
Shell> exit 0x8000000000000002
## Application failed, r = 2
bootefi - Boots an EFI payload from memory
Usage:
bootefi <image address>[:<image size>] [<fdt address>]
- boot EFI payload
bootefi bootmgr [fdt address]
- load and boot EFI payload based on BootOrder/BootXXXX variables.
If specified, the device tree located at <fdt address> gets
exposed as EFI configuration table.
This makes no sense.
Fixes: 296faf4f7ef1 ("cmd: bootefi: re-organize do_bootefi()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We should not try to remove protocol interfaces from a NULL handle.
efi_run_image() should always return the return code of the executed EFI
binary.
Fixes: 6422820ac3e5 ("efi_loader: split unrelated code from efi_bootmgr.c")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Update and improve the building documentation of Apalis iMX8.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Update and improve the building documentation of Colibri iMX8X.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Test that Unicode code points which map to CP437 code points 1-31 are
converted to '_'. This ensures no FAT file names do not contain chars
which are control characters in other code pages (CP 1250 for example).
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Draw symbols from Unicode's "Geometric shapes" page which translate to
code page 437 code points 1-31. These are used by UEFI applications to
draw user interfaces using EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.
The output has to be checked manually on the screen for correctness.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
UEFI applications rely on Unicode output capability, and might use that
for drawing pseudo-graphical interfaces using Unicode defined box
drawing characters.
Add a simple test to display the most basic box characters, which would
need to be checked manually on the screen for correctness.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
UEFI relies entirely on unicode output, which actual fonts displayed on
the screen might not be ready for.
Add a test displaying some international characters, to reveal missing
glyphs, especially in our builtin fonts.
This would be needed to be manually checked on the screen for
correctness.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Code page 437 uses code points 1-31 for glyphs instead of control
characters. Map the appropriate Unicode code points to this code points.
Fixes rendering of grub2's menu as EFI application using the
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL on a console with bitmap fonts.
Signed-off-by: Janne Grunau <j@jannau.net>
efi_console / UEFI applications (grub2, sd-boot, ...) pass UTF-8
character sequences to vidconsole which results in wrong glyphs for code
points outside of ASCII. The truetype console expects Unicode code
points and bitmap font based consoles expect code page 437 code points.
To support both convert UTF-8 to UTF-32 and pass Unicode code points in
vidconsole_ops.putc_xy(). These can be used directly in console_truetype
and after conversion to code page 437 in console_{normal,rotate}.
This fixes rendering of international, symbol and box drawing characters
used by UEFI applications.
Signed-off-by: Janne Grunau <j@jannau.net>
Short reference link names like "dtspec", "dtrepo", "dttweaks" etc.
interrupt the flow of the document text. Lets avoid them and instead
expand in place for better readability.
Suggested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Add a test for the button_cmd feature. This validates that commands can
be mapped to two buttons, that the correct command runs based on which
button is pressed, that only 1 command is run, and that no command runs
if button_cmd_0_name is wrong or unset.
Additionally, fix a potential uninitialised variable use caught by these
tests, the btn variable in get_button_cmd() is assumed to be null if
button_get_by_label() fails, but it's actually used uninitialised in
that case.
CONFIG_BUTTON is now enabled automatically and was removed when running
save_defconfig.
Fixes: e761035b6423 ("boot: add support for button commands")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Copy dts/upstream/src/arm64/Makefile into dts/upstream/src/arm/Makefile
and create a commit. This makes 32bit ARM buildable with OF_UPSTREAM .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm
Tested-by: Tony Dinh <mibodhi@gmail.com>
There could be two memory allocation scheme in SPL phase.
Explicitly print the corresponding error message.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
- TI J7200 updates, GIC-600 support, 2 more tests, fix parsing
ccsidr_el1 register in some cases, prepare for allowing remoteproc to
use fs_loader and make the binary_size_check rule not require 'bc'.
Add a test for reset commands which performs resetting of CPU, It does
COLD reset by default and WARM reset with -w option.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add test case for saveenv command in non-JTAG bootmode which saves the
u-boot environment variables in persistent storage.
Signed-off-by: Love Kumar <love.kumar@amd.com>
The error message "bc: command not found" is easily missed since the
build continues.
bc is not a part of coreutils or base-devel. POSIX sh can also do the
calculation.
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Current Cache Size ID Register (ccsidr_el1) has two "flavors"
depending on whether FEAT_CCIDX is implemented or not.
When FEAT_CCIDX is implemented Associativity parameter
is coded on bits [23:3] and NumSets parameter on bits [55:32].
When FEAT_CCIDX is not implemented then Associativity parameter
is coded on bits [12:3] and NumSets parameter on bits [27:13].
Current U-Boot code does not check whether FEAT_CCIDX is implemented
and always parses ccsidr_el1 as if FEAT_CCIDX was not implemented.
This is of course wrong on systems where FEAT_CCIDX is implemented.
This patch fixes that problems and tests whether FEAT_CCIDX
is implemented or not and accordingly parses the ccsidr_el1 register.
Signed-off-by: Lukasz Wiecaszek <lukasz.wiecaszek@gmail.com>
Arm's GIC-600 features a Power Register (GICR_PWRR),
which needs to be programmed to enable redistributor
operation. Power on the redistributor and wait until
the power on state is reflected by checking the bit
GICR_PWRR.RDPD == 0. While running U-Boot in EL3
without enabling this register, GICR_WAKER.ChildrenAsleep
bit is not getting cleared and loops infinitely.
This register(GICR_PWRR) must be programmed to mark the frame
as powered on, before accessing other registers in the frame.
Rest of initialization sequence remains the same.
ARM GIC-600 IP complies with ARM GICv3 architecture.
Enable this config if GIC-600 IP present.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Corrects the ti,sci property to point to dm_tifs node for proper
functioning of mcu_ringacc and mcu_udmap.
Fixes: df73e791ce09 ("arm: dts: j7200: dts sync with Linux 6.6-rc1")
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
- Add the missing bootph-all property in the flash subnode for ospi
- Add the missing overrides for the ospi node in the r5 devicetree
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Add the necessary configs required for OSPI functionality.
Also update the ospi flash partition offsets as per the devicetree.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
load_firmware() API calls fs-loader APIs and checks for CONFIG_FS_LOADER
before calling those APIs. The if check only checks for CONFIG_FS_LOADER
but not for CONFIG_SPL_FS_LOADER.
When CONFIG_FS_LOADER is enabled, load_firmware() API calls fs-loader APIs
but this is done at SPL stage and at this time FS_LOADER is not built yet
as a result we see below build error.
AR spl/boot/built-in.o
LD spl/u-boot-spl
arm-none-linux-gnueabihf-ld.bfd: arch/arm/mach-k3/common.o: in function
`load_firmware':
/home/danish/workspace/u-boot/arch/arm/mach-k3/common.c:184: undefined
reference to `get_fs_loader'
arm-none-linux-gnueabihf-ld.bfd:
/home/danish/workspace/u-boot/arch/arm/mach-k3/common.c:185: undefined
reference to `request_firmware_into_buf'
make[2]: *** [/home/danish/workspace/u-boot/scripts/Makefile.spl:527:
spl/u-boot-spl] Error 1
make[1]: *** [/home/danish/workspace/u-boot/Makefile:2055:
spl/u-boot-spl] Error 2
make[1]: Leaving directory '/home/danish/uboot_images/am64x/r5'
make: *** [Makefile:177: sub-make] Error 2
Fix this by modifying the if check to CONFIG_IS_ENABLED(FS_LOADER) instead
of IS_ENABLED(CONFIG_FS_LOADER) as the former will check for the
appropriate config option (CONFIG_SPL_FS_LOADER / CONFIG_FS_LOADER) based
on the build stage.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
