We might not be able to always rely on the EEPROM introspection data.
So add a config option alternative which configures the RAM size
to a fix value.
We still try to read the EEPROM introspection data at this point.
So we can print the SoM information if available.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Add support for different RAM sizes and speed grades on the
phyCORE-i.MX8MP.
Add support for 1GB 1.5GHz, 1GB 2GHz, 4GB 1.5GHz,
4GB 2GHz and 8GB 2GHz RAM.
The RAM size and speed grade is detected by the information
stored in the EEPROM on the SoM.
Co-developed-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Co-developed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Co-developed-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to
OF_UPSTREAM. Linux kernel device tree for the board can be used as is,
corresponding U-Boot device tree files are removed. U-Boot tweaks are
kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MM is used by the phyBOARD-Polis and the
phyGATE-Tauri-L. Migrate both boards to OF_UPSTREAM. Linux kernel device
trees for both boards can be used as is, corresponding U-Boot device
tree files are removed. U-Boot tweaks are kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
Add support for MT53E512M32D1ZW-046 IT:C memory.
This 4 GB memory has 17 row bits instead of 16 and requires 380 ns of
tRFC (tRFCab) instead of 280 ns due to increased channel density to 16 Gb.
Both modifications are retro-compatible with previous memories.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The following patch series adds support for version 2 of the FWU
metadata. The version 2 metadata structure is defined in the latest
revision of the FWU specification [1].
The earlier versions of these patches were migrating to a version 2
only support in U-Boot, similar to TF-A. However, based on feedback
from ST [2], this series has been updated to support both versions. A
platform would still be needed to enable one of the two versions of
metadata through a config symbol.
TF-A has code which reads the FWU metadata and boots the platform from
the active partition. TF-A has decided to migrate the FWU code to a
version 2 only support. These changes have been merged in upstream
TF-A.
These changes have been tested on the ST DK2 board, which uses the GPT
based partitioning scheme. Both V1 and V2 metadata versions have been
tested on the DK2 board.
These changes need to be tested on platforms with MTD partitioned
storage devices.
Now that support for FWU metadata version 2 has been added, the
feature can be enabled on platforms which had enabled it. A new config
symbol for selecting the metadata version for the platform is also
being added.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add an entry for the FWU Multi Bank Update feature.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU Update Agent in U-Boot supports both versions of the FWU
metadata. Make changes in the documentation to reflect this.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Make changes to the FWU metadata access tests corresponding to the
changes in the FWU metadata access code.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The version 2 of the FWU metadata allows for appending opaque vendor
specific data to the metadata structure. Add support for appending
this data to the metadata. The vendor specific data needs to be
provided through a file, passed through a command-line parameter. Make
corresponding changes to the tool's manpage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for generating the FWU metadata version 2. The tool now
requires the version to be provided as a command-line option. Make
corresponding changes to the tool's manpage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for displaying data specific to FWU metadata version
2. Because the size of the v2 metadata structure is read from the
structure itself, allocate memory for the metadata structure by first
getting the size of the structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Make changes to the functions used for generating the DFU's alt
variable so that the FWU image information is obtained from the common
version agnostic structure instead of reading the metadata.
While here, also update the name of the field used for storing the
image GUID in the FWU metadata.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Information about FWU images on MTD partitions is now stored with the
corresponding driver instead of a global variable. Get this
information from the driver.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The third argument passed to the function gen_image_alt_info() is not
used and is superfluous. Remove this unused argument from the function
call.
Fixes: 4898679e19 (FWU: Add FWU metadata access driver for MTD storage regions)
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Support has been added for version 2 of the FWU metadata
structure. Add config symbols to enable either of the two versions.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Transition the platform to either Trial State or Regular State on a
successful update. Do this by calling the fwu_state_machine_updates()
API function.
For version 1 of the FWU metadata, the transition to Trial State is
done by starting the Trial State counter, while for version 2, in
addition to the counter, the bank_state field of the FWU metadata is
also updated to Valid.
For transitioning the platform to Regular State, no action is needed
with version 1 of the FWU metadata structure, while for version 2, the
bank_state field is set to Accepted.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
With addition of support for version 2 of the FWU metadata structure,
the metadata information is collected into a version agnostic
structure. Make changes to the FWU functions so that the information
that was earlier obtained by reading the metadata structure is now
obtained through this version agnostic structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Support is being added in U-Boot for version 2 of the FWU
metadata. Support for this version is to co-exist with version 1
support. To achieve this, a common, version agnostic structure has
been added to keep information provided by the FWU metadata
structure.
Add API's to handle the version specific FWU metadata fields. The
version agnostic structure gets initialized at boot by reading the FWU
metadata. Updates to the FWU metadata result in the API's getting
called to populate the version specific fields of the strucure, before
the metadata gets written to the storage media.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU specification now has two versions of the FWU metadata
structure, and both are to be supported. Introduce a version agnostic
structure for storing information about the FWU updatable images. This
allows for a split of common version agnostic FWU code and version
specific code.
The version specific code is then responsible for arranging the data
as per the corresponding metadata structure before it gets written to
the metadata partitions.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for version 2 of the FWU metadata structure. The top level
structure is kept separate through a config symbol. Most of the
fields, primarily used for providing information on updatable images
are common across the two versions.
Also change a few existing structure members used for image
identification to reflect the fact that these are GUIDs, and not
UUIDs.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU metadata access driver for MTD partitioned devices currently
uses a statically allocated array for storing the updatable image
information. This array depends on the number of banks and images per
bank. With migration of the FWU metadata to version 2, these
parameters are now obtained at runtime from the metadata.
Make changes to the FWU metadata access driver for MTD devices to
allocate memory for the image information dynamically in the driver's
probe function, after having obtained the number of banks and images
per bank by reading the metadata. Move the image information as part
of the driver's private structure, instead of using a global variable.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
In version 2 of the metadata structure, the size of the structure
cannot be determined statically at build time. The structure is now
broken into the top level structure which contains a field indicating
the total size of the structure.
Add a size parameter to the metadata access API functions to indicate
the number of bytes to be accessed. This is then used to either read
the entire structure, or only the top level structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The fwrite call returns the number of bytes transferred as part of the
write only when the size parameter is 1. Pass the size parameter to
the library call as 1 so that the correct number of bytes transferred
are returned.
Fixes: fdd56bfd3a ("tools: Add mkfwumdata tool for FWU metadata image")
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Support is to be added in the following commits for the FWU metadata
version 2. Disable the FWU feature on platforms that enable it for the
V2 addition work.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20834
- Allow signing i.MX8M flash.bin via binman, which is a much more
elegant solution that using scripts.
- Improve i.MX8M HAB documentation.
- Increase PHY auto-negotiation timeout to 20s on MX8Menlo
- Add bmode support for the MX53 Menlo board.
- Update Update iMX8MM Menlo board configuration
For CST to find the certificates and keys for signing, some keys and
certs need to be copied into the u-boot build directory.
Signed-off-by: Claudius Heine <ch@denx.de>
By removing the "boot" directory in the "m53menlo/boot/fitImage" path,
we simplify the TFTP server directory layout a bit. This also requires a
change to the mmcload command as it (mis-)uses the same variable as the
TFTP boot.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Marek Vasut <marex@denx.de>
The board can do primary/secondary boot switching, enable the bmode command.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Synchronize Toradex Verdin iMX8MM based MX8Menlo board configuration
with Toradex Verdin iMX8MM and enable convenience commands like cat,
hexdump, xxd.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The ethernet PHY on MX8Menlo board takes a while to come out of
reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.
Signed-off-by: Marek Vasut <marex@denx.de>
Update documentation and use nxp_imx8mcst binman etype for signing
of flash.bin instead of previous horrible shell scripting.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
In case CONFIG_IMX_HAB is enabled, extend the binman image description for
all of i.MX8M{Q,M,N,P} with CST wrapper node. This way, if CONFIG_IMX_HAB
is enabled, binman will be automatically used to sign SPL and fitImage.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Add binman_imx_spl and binman_imx_fit labels to nxp-imx8mimage {} and fit {}
nodes respectively, so they can be referened in board DTs no matter how deep
in the top level binman image description they are. Update current board DTs
to use those labels.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Add new binman etype which allows signing both the SPL and fitImage sections
of i.MX8M flash.bin using CST. There are multiple DT properties which govern
the signing process, nxp,loader-address is the only mandatory one which sets
the SPL signature start address without the imx8mimage header, this should be
SPL text base. The key material can be configured using optional DT properties
nxp,srk-table, nxp,csf-crt, nxp,img-crt, all of which default the key material
names generated by CST tool scripts. The nxp,unlock property can be used to
unlock CAAM access in SPL section.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Raymond Mao <raymond.mao@linaro.org> says:
This patch set is picked from the previously posted serie:
"[RFC] Integrate MbedTLS v3.6 LTS with U-Boot"
They are not directly related to MbedTLS integration, but the
prerequisite for a few clean-up, refactoring and minor fixes.
For V2, the linker script patch is dropped and added one patch
to move the snprintf to stdio.h
Move snprintf to stdio.h since it is needed by exteranl libraries.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use of typedef is beneficial for porting with other crypto libs
without changing the API callers.
Secondly, it is for the code consistency with other digest libs.
SHA1, SHA256 and SHA512 are all using typedef for their context.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Remove the redundant includes of u-boot/sha1.h, u-boot/sha256.h
and u-boot/sha512.h
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Remove the redundant includes of u-boot/md5.h, u-boot/sha1.h,
u-boot/sha256.h and u-boot/sha512.h
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Rasmus Villemoes <rasmus.villemoes@prevas.dk> says:
The first commit is trivial cleanup. The second syncs
scripts/setlocalversion with linux 6.9, with just a one-line change on
top to account for a Kbuild change that U-Boot has not yet adopted.
The changes upstream since the last sync (2ed1b242ab
"scripts/setlocalversion: sync with linux 5.8") are
(5) 548b8b5168c9 scripts/setlocalversion: make git describe output more reliable
77a88274dc1a kbuild: replace LANG=C with LC_ALL=C
2a73cce2dad3 scripts/setlocalversion: remove mercurial, svn and git-svn supports
a2be76a352f1 scripts/setlocalversion: remove workaround for old make-kpkg
ffaf62a8050b scripts/setlocalversion: add more comments to -dirty flag detection
630ff0faf84e scripts/setlocalversion: factor out 12-chars hash construction
042da426f8eb scripts/setlocalversion: simplify the short version part
5df99bec210a scripts/setlocalversion: fix a bug when LOCALVERSION is empty
(1) 7d153696e5db kbuild: do not include include/config/auto.conf from shell scripts
(2) 129ab0d2d9f3 kbuild: do not quote string values in include/config/auto.conf
f6e09b07cc12 kbuild: do not put .scmversion into the source tarball
992ebfab2a75 setlocalversion: simplify the construction of the short version
75280bdf49b2 setlocalversion: make indentation shallower
(3) ec31f868ec67 setlocalversion: absorb $(KERNELVERSION)
eed36d775177 setlocalversion: clean up the construction of version output
(4) 6ab7e1f95e96 setlocalversion: use only the correct release tag for git-describe
05e96e96a315 kbuild: use git-archive for source package creation
3354c64d4184 scripts/setlocalversion: clean up stale comment
01e89a4acefc scripts/setlocalversion: also consider annotated tags of the form vx.y.z-${file_localversion}
The only thing U-Boot has been applying on top was to deal with not
sourcing include/config/auto.conf but instead using awk to extract the
right value. Commit (1) did a very similar thing upstream, so we no
longer need to do that. However, upstream then went a step further (2)
and changed the convention for what goes into auto.conf, so RHS no
longer contain double-quotes. That commit thus changed the sed pattern
to no longer match those quotes, but as U-Boot has not yet adopted
that change, we have to deal with that. In order to be a little
forward-compatible, I did that in a way that should work both ways:
# version string from CONFIG_LOCALVERSION
-config_localversion=$(sed -n 's/^CONFIG_LOCALVERSION=\(.*\)$/\1/p' include/config/auto.conf)
+config_localversion=$(sed -n 's/^CONFIG_LOCALVERSION=\(.*\)$/\1/p' include/config/auto.conf | tr -d '"')
Furthermore, (3) now requires that there is an appropriate
KERNELVERSION environment variable set. One way to deal with that
would be to just modify the script to use UBOOTVERSION instead, but
for now I've instead opted to let the Makefile provide
KERNELVERSION=$(UBOOTVERSION) to keep the setlocalversion changes
minimal.
That variable is further put to use in (4). Note that the logic for
mapping *VERSION -> [upstream annotated tag to look for] works
unchanged in U-Boot for the current versioning scheme 20XX.YY(-rcN)?.
My motivation for wanting to do this sync is to get (4) and (5), in
order to get the setlocalversion output both more predictable and
consistent across different build environments, i.e. independent of
random local .gitconfig settings, total number of git objects and/or
existence of unrelated tags (possibly from some tracked fork).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Instead of duplicating the contents of the filechk_uboot.release
variable, use it directly.
This is preparation for the next patch which will modify
filechk_uboot.release, and reflects what the linux kernel does
nowadays:
kernelrelease:
@$(filechk_kernel.release)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
