Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Remove leftover code from Milk-V Mars CM and Mars CM Lite boards that do
not exist in upstream Linux Kernel devicetree-rebasing. These will be re-
introduced when submitted upstream for a future U-Boot release. Users of
these boards should use the previous stable release of U-Boot until then.
Signed-off-by: E Shattow <e@freeshell.de>
take 2
-----BEGIN PGP SIGNATURE-----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=2n9a
-----END PGP SIGNATURE-----
Merge tag 'qcom-next-20250324' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon into next
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Harrison Mutai <harrison.mutai@arm.com> says:
This patch introduces two updates to the vexpress64 project:
- Disable CRC32 by default to prevent aborts in a standard FVP setup.
- Add a guide for running FVP with TF-A, providing a clear starting point for
users.
Link: https://lore.kernel.org/r/20250304165204.53097-1-harrison.mutai@arm.com
Wadim Egorov <w.egorov@phytec.de> says:
This patch series syncs the phyCORE-AM62Ax feature-wise with our other
K3-based SoMs by adding SoM overlay handling and capsule updates. It
also introduces support for USBDFU boot and includes various minor fixes.
Link: https://lore.kernel.org/r/20250305045838.3614661-1-w.egorov@phytec.de
The previous instructions resulted in a bootloader that wouldn't fit in
an MBR gap. I have updated the docs based on upstream's build process.
Signed-off-by: Baltazár Radics <baltazar.radics@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250110111335.9221-1-baltazar.radics@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Provide a common part for our K3 based boards including general details
about environment handling and EFI capsule updates.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add documentation on how to run FVP with U-Boot and TF-A. This helps
users configure and run U-Boot correctly on Arm models.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB of
internal memory that can be supplemented with a microSDXC card giving up to
128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tom Rini <trini@konsulko.com> says:
This small series separates "bloblist" and "standard passage" to allow
for these similar concepts to explore solutions to problems without
introduces breaking changes to the other.
Link: https://lore.kernel.org/r/20250220000223.1044376-1-raymond.mao@linaro.org
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Harrison Mutai <harrison.mutai@arm.com> says:
This series of patches enhances the vexpress64 platform by enabling bloblist
support. It also introduces support for CONFIG_BLOBLIST_PASSAGE. This is
necessary to boot vexpress64 and other boards without manually specifying a
fixed address and size for the bloblist.
After this change, all the bloblist init modes are supported (i.e., fixed,
alloc, passage) and Vexpress64 boots with CONFIG_BLOBLIST_PASSAGE.
Link: https://lore.kernel.org/r/20250204175844.19890-1-harrison.mutai@arm.com
Enable bloblist on vexpress64 platforms to facilitate information
passing from TF-A using the firmware handoff framework.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Add support for the R-Car S4 Starter Kit with R8A779F4 SoC support.
This implementation natively uses OF_UPSTREAM to pull in most recent
DT. The defconfig is derived from S4 Spider, with reduced UART baud
rate to 921600 Bdps. The DT alias to rswitch is removed as the alias
should point to rswitch ports, not to rswitch itself, see [1].
[1] https://lore.kernel.org/linux-arm-kernel/20250118111344.361617-5-marek.vasut+renesas@mailbox.org/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
U-Boot can be executed in place from a flash device.
Describe how this can be emulated on RISC-V QEMU.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The defconfig name should be: coolpi-cm5-genbook-rk3588_defconfig
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add instructions on how to build and package OP-TEE for the
phycore-imx8mm based boards. The build instructions are identical for
phyGATE-Tauri-L and phyBOARD-Polis.
Also fix missig '-' for TF-A build instructions.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE
integration.
Also add missing '-' to TF-A build instruction while at it.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reading doc/board/google/chromebook_coral.rst we can see that at some
point it was intended to put the bloblist in CAR, rather than DRAM, at
some point during development. This is fine for TPL/SPL stages where we
have very minimal information stored in the bloblist and so we can set
the limit there to 4KiB and then expand it to 196KiB in U-Boot proper so
there's room for ACPI tables and so forth. We also update the
documentation to use the same location for CONFIG_BLOBLIST_ADDR in both
references.
Signed-off-by: Tom Rini <trini@konsulko.com>
ddrbin_tool interface has been changed. Additional chip_name argument
is now required to modify ddr binary file. Update documentation
to be consistent with the new interface.
Update BL31 and ROCKCHIP_TPL file paths to match current version
of binaries available in the rkbin repository.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps
Ethernet ports designed and developed by FriendlyElec for IoT
applications.
Specification:
- Rockchip RK3566
- 2GB LPDDR4X RAM
- optional 32GB eMMC module
- SD card slot
- 2x 1000 Base-T
- 3x LEDs (POWER, LAN, WAN)
- 2x Buttons (Reset, MaskROM)
- 1x USB 3.0 Port
- Type-C 5V 2A Power
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Khadas Edge2 is a Rockchip RK3588S based SBC (Single Board Computer)
by Khadas.
There are tree variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip RK3588S SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MP4 GPU
3x MIPI CSI 4x lanes
2x MIPI-DSI DPHY 4x lanes
32/64GB eMMC
1x USB 2.0, 1x USB 3.0, 2x USB-Type-C
1x HDMI 2.1 output, 1x DP 1.4 output
USB PD over USB Type-C
Kernel commit:
04d552993522 ("arm64: dts: rockchip: Add Khadas edge2 board")
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Signed-off-by: Huan Zhou <pericycle.cc@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Provide a page describing the usage of U-Boot on the LicheeRV Nano and a
description of the board.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Board introductions have a feature list which isn't formatted properly
according to rST and is thus rendered incorrectly.
Fix this by adding the missing newlines in the appropriate places.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Add a blank line after title "Specification:" to
make it render correctly html.
And also remove the useless > in bash code block.
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Garrett Giordano <ggiordano@phytec.com> says:
This patch set adds the phyCORE AM62Ax board support and documenation to
u-boot.
The phyCORE-AM62Ax is a SoM (System on Module) featuring TI's AM62Ax SoC. It can
be used in combination with different carrier boards. This module can come
with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs
from the AM62x family.
A development Kit, called phyBOARD-Lyra is used as a carrier board reference
design around the AM62x SoM.
This series depends on the following two patches:
- [PATCH v2] arm: mach-k3: am62a7: Provide a way to obtain boot device for non SPL
https://lists.denx.de/pipermail/u-boot/2024-October/570156.html
- [PATCH] board: phytec: common: Introduce CONFIG_PHYTEC_K3_DDR_PATCH
https://lists.denx.de/pipermail/u-boot/2024-November/571543.html
Link: https://lore.kernel.org/r/20241118231606.3161665-1-ggiordano@phytec.com
[trini: Fix warning in board/phytec/common/k3/board.c when
CONFIG_EFI_HAVE_CAPSULE_SUPPORT is not enabled]
Signed-off-by: Tom Rini <trini@konsulko.com>
The phyCORE-i.MX 93 is available in various variants (e.g. different ram
sizes, eMMC HS400 yes/no). Enable hardware introspection for the
imx93-phyboard-segin_defconfig, so that during startup the SOM module
variant can be detected, and the hardware can be configured accordingly.
The resulting SPL and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
The FriendlyElec NanoPi R2S Plus is a single-board computer based on
Rockchip RK3328 SoC. It features e.g. 1 GB DDR4 RAM, 32 GB eMMC,
SD-card, 2x GbE LAN, optional M.2 SDIO Wi-Fi and 2x USB 2.0 host.
Features tested on a NanoPi R2S Plus 2309:
- SD-card boot
- eMMC boot
- Ethernet
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add support for Cool Pi GenBook, it works as a carrier board
connect with CM5 SOM.
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
Tested by Armbian boot on USB disk.
Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Qnap TS433 is a 4-bay NAS based around the RK3568.
Two SATA bays are connected to the RK3568's own SATA controllers while
the other two are connected to a JMicron SATA controller living on the
PCIe bus.
It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <sjg@chromium.org>
