Pull request net-20250818.
This is mostly code cleanup and fixes, mainly for issues reported by the
Smatch tool, plus two small features for NET_LWIP as well as support for
the BCM54612E phy.
net-common:
- Fix a bunch of issues reported by Smatch
- Introduce CONFIG_DNS
- Add support for BCM54612E phy
net-legacy:
- Add missing SPDX-License-Identifier for files originating from LiMon
net-lwip:
- ping: initialize net_try_count to 1
- sntp: remove redundant sys_check_timeouts()
- tftp: resend initial request
- Add Kconfig option to show ICMP unreachable errors
In cdns_torrent_phy_probe the test for too many lanes configured does
not set an error code before taking the error path. This could lead to a
silent failure if the calling code does not detect the error. Add the
code to return -EINVAL in this case.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In cdns_sierra_pll_bind_of_clocks the variable 'i' is declared but never
assigned to before its value is used in a dev_err. Replace clk_names[i]
by the name passed to device_bind(), i.e., "pll_mux_clk". With that, the
clk_names[] array is unused and can therefore be removed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
[jf: update description]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
In ks8851_mll_detect_chip the if..else code detects the case of (val &
0xfff0) != CIDER_ID and returns if found. So testing for this again will
always fail and the code is unreachable. Just remove the test and code
block.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In ca_phy_probe when checking for an external phy it uses a field from
the internal phy due to what is assumed to be a copy/paste typo. Make
the obvious fix to use the field from the external phy.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In rvu_af_init if the code fails to allocate memory for nix_af it will
take the error path with nix_af == NULL which will dereference nix_af.
Add the appropriate NULL check.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In nix_lf_setup there is a default value assigned to err in case an
error is detected. However this default value will be overwritten in the
for loop so that later code does not return an error code from the
function. Add a new assignment to restore err to the default error code.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In mvpp2_probe the code attempts to get a value for "gop-port-id" and
assigns it to port->gop_id but it then tests port->id for being equal to
-1. That is an impossible test as port->id is a field of type u8 so
cannot be negative. Change the test to port->gop_id.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In phy_info_parse all uses of the variable phyaddr are as an int so
declaring as u32 is not useful and prevents the test for an error return
from fdtdec_get_int ever detecting an error. Change phyaddr to be an
int.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
You cannot test an unsigned char to be >= 256. Instead make the
variables start and end to be ints.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In mv88e6xxx_port_enable when attempting to mask out the previous
settings of two bits a logical operator was used instead of a bitwise
operator. Fix this.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In mtk_eth_of_to_plat, the last error check has the value in
'priv->phy_addr' but returns ret. Correct to return 'priv->phy_addr'
instead.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In ldpaa_eth_open a memset is used to initialise a struct to 0 but the
size passed is that of a different struct. Correct to pass the sizeof
the struct that is being initialised.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
get_timer returns a ulong value representing system time in ms.
On a 64-bit system, this ulong value is 64 bits long. However,
the driver stores it in a 32-bit unsigned integer, which overflows
after 49 days up time, causing the driver to get an incorrect time.
Replace the unsigned int variable with a ulong type to properly store
the value returned by get_timer.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
In comphy_cp110_init_serdes_map in comphy_cp110.c there are two fields
in cfg, comphy_lanes_count and comphy_mux_bitcount, which are fetched
from the FDT blob with fdtdec_get_int which returns an int. These two
fields are then tested for being negative. However the fields are
declared as unsigned so those tests must always fail. Change the
declaration of those fields to be int instead of u32 and the code will
work as expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
The limit checks in get_speed_string and get_type_string are off by 1 as
they do not account for the maximum index into an array that can be used
is 1 less than the number of elements in that array. Adjust the limit
checks to allow for this.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
In vsc8514_config there is a while loop for detecting a config failure
using a timeout counter with a post-decrement. In the case of a timeout
this will result in the loop exiting with timeout == -1 so use that as
the test below the loop to detect that the timeout occurred.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
In octeontx_smi_probe if an error is detected then memory that was
allocated is not freed. Small refactor of the code to use a common
return and free memory. Also return -ENOMEM for an allocation failure.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In nicvf_cq_handler there is a test for !cqe_count which will return if
true so it is guaranteed that cqe_count will true after that point. This
makes the later test for cqe_count redundant so it can be removed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In nicvf_rcv_pkt_handler there is no need to initialise err as it is
assigned to immediately after. Also the test for !pkt will return if
true meaning that pkt is guaranteed to be true after that code block and
so no need to test for it and the redundant test can be removed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025
page 4581 Figure 104.3b Initial Setting of PCIEC(example) middle
of the figure indicates that fourth write into register 0x148 [2:0]
is 0x3 or GENMASK(1, 0). The current code writes GENMASK(11, 0)
which is a typo. Fix the typo.
Fixes: be3dd0dc2fd9 ("pci: pcie-rcar-gen4: Add Renesas R-Car Gen4 DW PCIe controller driver")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This driver provides an interface to access the functions of the system
controller on the Microchip PolarFire SoC.
This driver includes functions to use the system controller to read
the device serial number.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This driver adds support for the single mailbox channel of the MSS
system controller on the Microchip PolarFire SoC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The driver specifies 154 pins so should have a maximum selector of 153
to ensure that the index into the array special_pins_names does not
overflow.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Link: https://lore.kernel.org/r/20250807-pinctrl_qcom-v1-2-42fac6707fd5@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
In sa8775p_get_pin_name the limit check for the index into
msm_special_pins_data allows for more elements than exist. Add code to
ensure the array index remains in bounds.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Link: https://lore.kernel.org/r/20250807-pinctrl_qcom-v1-1-42fac6707fd5@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The pointer 'label' is declared and later dereferenced without ever
having a value assigned to it. Add an assignment to this pointer so it
will be valid later when dereferenced.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250723-button-qcom-pmic-v1-1-9c317ac71167@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The NULL check for priv in qcom_geni_serial_poll_bit serves no useful
prupose as too much other code surrounding it relies on priv being
valid. Remove the NULL check for priv and other related code.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Link: https://lore.kernel.org/r/20250811-serial_msm_geni-v1-2-4499179491bc@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
In msm_serial_setbrg if the call to get_clk_div_rate fails then there
will not have been an assignment to clk_div which will lead to the call
to geni_serial_baud using an uninitialised value.
Check for an error from get_clk_div_rate and return an error code if so.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250811-serial_msm_geni-v1-1-4499179491bc@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
In qcom_snps_eusb2_phy_probe after the call to devm_clk_get if an error
is found then ret is printed but has not been assigned to by the code.
Decode the error from the pointer and assign it to ret.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250806-phy_qcom_snps-v1-1-5cda830026c7@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The name of the pin function was changed last minute in the DT, from
emac0 to gmac0.
Adjust the name we use in the pinctrl driver accordingly.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This pull request introduces initial U-Boot support for Agilex7 M-series, along
with several enhancements and cleanups across existing Agilex platforms. Key
changes include new board support, DDR driver additions, updated device trees,
and broader SoCFPGA SPL improvements.
Highlights:
- Agilex7 M-series bring-up:
- Basic DT support and board initialization for Agilex7 M-series SoC and
SoCDK.
- New sdram_agilex7m DDR driver with UIBSSM mailbox support and HBM support.
- Clock driver support for Agilex7 M-series.
- New defconfig: socfpga_agilex7m_defconfig.
- Agilex and Agilex5 enhancements:
- Improved SPL support: ASYNC interrupt enabling, system manager init
refactor, and cold scratch register usage.
- Updated firewall probing and watchdog support in SPL.
- Cleaned up DDR code, added secure region support for ATF, and improved warm
reset handling.
- Device Tree and config updates:
- Migration to upstream Linux DT layout for Agilex platforms.
- Consolidated socfpga_agilex_defconfig and removed deprecated configs.
- Platform-specific environment variables for Distro Boot added.
- Driver fixes and cleanups:
- dwc_eth_xgmac and clk-agilex cleanup and improvements.
- Several coverity and style fixes.
Contributions in this PR are from Alif Zakuan Yuslaimi, Tingting Meng, and
Andrew Goodbody. This patch set has been tested on Agilex 5 devkit, Agilex
devkit and Agilex7m devkit.
Passing all pipeline tests at SoCFPGA U-boot custodian
https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27318
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27314
- Several Smatch reported fixes.
- Enable the temperature command on imx8ulp-evk.
- Fix mx8mm_fracpll_tbl.
- Make optee packaging optional for imx8m.
- Reuse and export low_drive_freq_update() on imx9.
- Enable USB OTG ID pin pull up in SPL on dh-imx6.
Clean up bit-shift by zero bit
Signed-off-by: Tingting Meng <tingting.meng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
This is for new platform enablement for Agilex7 M-series.
Add DDR driver for Agilex7 M-series. This driver is designed to support
DDR and HBM memory. The official HBM handoff is not ready yet, therefore
hardcoded handoff is used for HBM driver validation on mUDV board.
Signed-off-by: Tingting Meng <tingting.meng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Add uibssm mailbox driver for Agilex7 M-series. HPS will interact with UIB
and HBM subsystem through software defined mailbox interface.
HPS can retrieve HBM memory interface calibration status, UIB
configuration, memory interfae configuration, trigger calibration and etc
with the list of supported mailbox command type and opcode.
Signed-off-by: Tingting Meng <tingting.meng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Put all slave CPUs (CPU1-3) into WFI mode. Master CPU (CPU0) writes
the magic word into system manager's scratch register to indicate
the system has performed L2 reset and request reset manager to
perform hardware handshake and then trigger L2 reset. CPU0 put
itself into WFI mode. L2 reset will reboot all HPS CPU cores after
which all HPS cores are in WFI mode. L2 reset is followed by warm
reset request by SPL via RMR_EL3 system register.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The DDR data rate must be set correctly in the DDRIOCTRL
register according to the Actual Clock Frequency (ACF) value.
By enabling the reading of ACF value from bit 18 of the boot
scratch register during initialization, the DDR data rate is
able to be configured accurately.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Remove redundant code for MPFE CSR firewall disabled as this was
already set in DTreg dts.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Setting up firewall regions based on SDRAM memory banks configuration
(up to CONFIG_NR_DRAM_BANKS banks) instead of using whole address space.
First 1 MiB (0 to 0xfffff) of SDRAM is configured as secure region,
other address spaces are non-secure regions. The ARM Trusted Firmware (ATF)
image is located in this first 1 MiB memory region. So, this can prevent
software executing at non-secure state EL0-EL2 and non-secure masters
access to secure region.
Add common function for firewall setup and reuse for all SoC64 devices.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Replace cm_wait_for_fsm() function with wait_for_bit_le32() function
which supports accurate timeout.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Enable watchdog as early as possible after clock initialization
which is set at 10 seconds.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Update the ARMv8 generic timer frequency register (cntfrq_el0)
with the actual hardware timer frequency (COUNTER_FREQUENCY_REAL).
The generic timer frequency was set to 0x200000000 during boot clk
which needs to be set to 0x400000000 when transition from boot clk
to PLL clk.
This will ensure that subsequent timer operations are based on the
correct frequency, ensuring accurate timekeeping.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
In dwxgmac_of_get_mac_mode there is a test for mac_mode which will
return if false. After this point mac_mode is guaranteed to be true so
there is no need to test for this. Remove that test.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
In xgmac_probe there is a direct return after the point where unwind
gotos start to be used to undo actions performed by earlier code. Use
the appropriate unwind goto instead.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
If the allocation if the bounce buffer fails, virtio_free_pages is called
with a random value from the stack.
Ensure that vring.size is initialized.
Fixes: 37e53db38bdb ("virtio: Allocate bounce buffers for devices with VIRTIO_F_IOMMU_PLATFORM")
Addresses-Coverity-ID: 453314 Uninitialized scalar variable
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
