Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The details of the sysfw.itb from the R5 build that
also needs to be copied as part of the target images
is missing, but is included in the image formats a
little further down, so add it to the instructions.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Support for eMMC, SD card, GPIO and SPL have been available in LPi4A
port. Update the documentation of support status and build
instructions.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The LG Optimus 2X is a touchscreen-based, slate-sized smartphone designed
and manufactured by LG that runs the Android operating system. The
Optimus 2X features a 4" WVGA display, an Nvidia Tegra 2 dual-core chip,
512 MB of RAM and extendable 8 GB of internal storage. UART-B is default
debug port.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The LCKFB TaishanPi is a single-board computer based on the RK3566 SoC.
Specification:
- 1/2 Gib RAM
- Optinal EMMC
- SD-Card
- HDMI / MIPI CSI / MIPI DSI
- USB 2.0 Host (Type-A)
- USB 2.0 Host / OTG (Type-C)
- No Ethernet
This patch adds U-Boot support for the LCKFB TaishanPi RK3566 board, including:
- U-Boot device tree
- Default defconfig
- Board documentation
- MAINTAINERS entry
Changes in v2:
- Removed unused configs from `lckfb-tspi-rk3566_defconfig`
- Reordered TaishanPi entry in `doc/board/rockchip/rockchip.rst` alphabetically
Link to v1:
https://lore.kernel.org/u-boot/tencent_95ED0C0545D87B6A8C4B62EC045D53AD2406@qq.com/
Signed-off-by: Jiehui He <jiehui.he@foxmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The 5 Max is another board in the Orange Pi 5 family.
It's overall similar to the 5 Plus, but in a smaller form factor,
which leads to some I/O being reshuffled, but nothing relevant
to u-boot.
So, just reuse the config for the 5 Plus and adjust the DT names.
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Ilya Katsnelson <me@0upti.me>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This patch adds i.MX95 19x19 EVK board basic support.
Messaging unit for EdgeLock Secure Enclave, messaging unit for System
Manager, uSDHC for SD Card, gpio, lpuart are supported now.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Nishanth Menon <nm@ti.com> says:
Just happened to get a BeagleY-AI at desk and happened to test master
branch (7dd49a9264 drivers: scsi: Add 'erase' support), noticed a few
issues which were rather easy to solve.. so, here we go:
Link: https://lore.kernel.org/r/20250425173120.141503-1-nm@ti.com
The code-block directive requires addition of the prompt symbol for each
line, using the prompt directive instead allows for auto insertion of
the symbol per line[1].
For the readers, the character added by the prompt directive is
un-selectable i.e the entire line can be more easily selected for copy
pasting etc. Whereas with code-block, the prompt symbol like "$" is also
selectable which is usually not the intent.
This is mostly a QoL addition + making the docs consistent since k3.rst
makes use of prompt directives which these board docs include from.
[1]: https://pypi.org/project/sphinx-prompt/
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Provide the settings for using the debug UART in SPL.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
To avoid duplicate maintenance just include jh7110_common.rst to describe
the usage of the different boot sources.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Describe building U-Boot for the board and booting.
Carve out common information for JH7110 boards into an include.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Add a minimal generic RK3399 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3399 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add a minimal generic RK3328 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3328 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The ROC-RK3576-PC is a SBC made by Firefly, designed around the RK3576
SoC. This adds the needed board infrastructure and config for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Rockchip RK3576 is a ARM-based SoC with quad-core Cortex-A72
and quad-core Cortex-A53 including 6TOPS NPU, Mali-G52 MC3, HDMI Out,
DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, UFS,
USB OTG 3.0, Type-C, USB 2.0, PCIe 2.1, SATA 3, Ethernet, SDIO3.0, I2C,
UART, SPI, GPIO and PWM.
Add arch core support for it.
Signed-off-by: Xuhui Lin <xuhui.lin@rock-chips.com>
[adapted for mainline u-boot]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Radxa E20C is an ultra-compact network computer with a RK3528A SoC
that offers a wide range of networking capabilities.
Features tested on a Radxa E20C v1.104:
- SD-card boot
- eMMC boot
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add a minimal generic RK3528 board that only have eMMC and SD-card
enabled. This defconfig can be used to boot from eMMC or SD-card on most
RK3528 boards that follow reference board design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
J722S has hw rng, which can be used by OPTEE.
So remove option to use SW TRNG by OPTEE.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
The Tegra Note 7 is a mini tablet computer and the second Tegra 4
based mobile device designed by Nvidia that runs the Android operating
system. The Tegra Note has a 7" IPS display with 1280 x 800 (217 ppi)
resolution. The 1 GB of RAM and 16 GB of internal memory can be
supplemented with a microSDXC card giving up to 64 GB of additional
storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The ASUS Transformer Pad TF701T is an Android tablet computer made by
ASUS, successor to the ASUS Transformer Pad Infinity. The tablet includes
a Tegra 4 T114 processor clocked at 1.9 GHz, and an upgraded 2560×1600
pixel resolution screen, increasing the pixel density to 300 PPI and
a mobile dock. Transformers (t114) board derives from Nvidia Macallan
development board.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Motorola Atrix 4G (MB860) and Droid X2 (MB870) both featured a
dual-core NVIDIA Tegra 2 AP20H processor clocked at 1GHz, coupled with 1GB
of DDR2 RAM. Storage consisted of 16GB of internal flash memory, expandable
via microSD. The display was a 4.0-inch TFT LCD with a resolution of
960x540 pixels (qHD). The devices originally ran on Android up to 2.3
(Gingerbread).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
-----BEGIN PGP SIGNATURE-----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=Ep2x
-----END PGP SIGNATURE-----
Merge tag 'qcom-for-2025.07' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
Add some documentation which attempts to describe Qualcomm smartphone
support with the qcom-phone.config fragment, as well as a high level
debugging guide for diagnosing U-Boot issues when UART and framebuffer
are unavailable.
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Danila Tikhonov <danila@jiaxyga.com> # google-sunfish
Tested-by: Jens Reidel <adrian@mainlining.org> # xiaomi-davinci
Link: https://lore.kernel.org/r/20250331-qcom-phones-v4-4-f52e57d3b8c6@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Remove leftover code from Milk-V Mars CM and Mars CM Lite boards that do
not exist in upstream Linux Kernel devicetree-rebasing. These will be re-
introduced when submitted upstream for a future U-Boot release. Users of
these boards should use the previous stable release of U-Boot until then.
Signed-off-by: E Shattow <e@freeshell.de>
take 2
-----BEGIN PGP SIGNATURE-----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=2n9a
-----END PGP SIGNATURE-----
Merge tag 'qcom-next-20250324' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon into next
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Harrison Mutai <harrison.mutai@arm.com> says:
This patch introduces two updates to the vexpress64 project:
- Disable CRC32 by default to prevent aborts in a standard FVP setup.
- Add a guide for running FVP with TF-A, providing a clear starting point for
users.
Link: https://lore.kernel.org/r/20250304165204.53097-1-harrison.mutai@arm.com
Wadim Egorov <w.egorov@phytec.de> says:
This patch series syncs the phyCORE-AM62Ax feature-wise with our other
K3-based SoMs by adding SoM overlay handling and capsule updates. It
also introduces support for USBDFU boot and includes various minor fixes.
Link: https://lore.kernel.org/r/20250305045838.3614661-1-w.egorov@phytec.de
The previous instructions resulted in a bootloader that wouldn't fit in
an MBR gap. I have updated the docs based on upstream's build process.
Signed-off-by: Baltazár Radics <baltazar.radics@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250110111335.9221-1-baltazar.radics@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Provide a common part for our K3 based boards including general details
about environment handling and EFI capsule updates.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add documentation on how to run FVP with U-Boot and TF-A. This helps
users configure and run U-Boot correctly on Arm models.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB of
internal memory that can be supplemented with a microSDXC card giving up to
128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tom Rini <trini@konsulko.com> says:
This small series separates "bloblist" and "standard passage" to allow
for these similar concepts to explore solutions to problems without
introduces breaking changes to the other.
Link: https://lore.kernel.org/r/20250220000223.1044376-1-raymond.mao@linaro.org
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
