Link CFG_SYS_NS16550_COM1 value to chosen CONFIG_TEGRA_ENABLE_UART Tegra
wide. Remove all CFG_SYS_NS16550_COM1 from device headers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Motorola Atrix 4G (MB860) and Droid X2 (MB870) both featured a
dual-core NVIDIA Tegra 2 AP20H processor clocked at 1GHz, coupled with 1GB
of DDR2 RAM. Storage consisted of 16GB of internal flash memory, expandable
via microSD. The display was a 4.0-inch TFT LCD with a resolution of
960x540 pixels (qHD). The devices originally ran on Android up to 2.3
(Gingerbread).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Historically, PLLD2 mirrored PLLD's layout on Tegra30 and 114. However,
with the introduction of Tegra124, this changed. This layout alteration was
not considered, and it now requires a corrective action to prevent future
complications.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
PLLD and PLLD2 clocks possess a unique enable bit within their
miscellaneous register. Take this into account when using clock_set_rate
function.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
-----BEGIN PGP SIGNATURE-----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=Ep2x
-----END PGP SIGNATURE-----
Merge tag 'qcom-for-2025.07' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
DB410c has exactly 1 GiB of RAM. Some of it is reserved, but this is
described separately in the DT.
This was fixed before in commit 1d667227ea51 ("board: dragonboard410c: Fix
PHYS_SDRAM_1_SIZE"), but was reintroduced when DB410c was converted to use
the upstream device tree.
Note that there are variants of apq8016-sbc with 2 GiB RAM (e.g. the
Geniatech DB4). They need the WIP SMEM memory map parsing [1] to use the
full amount of RAM.
[1]: https://lore.kernel.org/u-boot/20241124-b4-modernise-smem-v1-0-b7852c11b67c@linaro.org/T/
Fixes: ed8fbd2889fc ("dts: msm8916: replace with upstream DTS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by:
Link: https://lore.kernel.org/r/20250407-db410c-fixes-v1-2-524aefbc8bb4@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The workaround for the "PSCI bug" on DragonBoard 410c implemented in
arch/arm/mach-snapdragon/include/mach/boot0.h clobbers the x0 register
by storing the CurrentEL in there. When running in EL1, the mode switch
sequence implemented there later clears the register again, but this is
skipped when U-Boot is booted in EL2.
This causes crashes in the mach-snapdragon board_fdt_blob_setup() later,
because the invalid address stored in x0 gets dereferenced to check if it
points to a valid DTB.
We can't rely on having a valid values in the CPU registers for the first
stage bootloader configuration on DB410c, and nothing would place a DTB
there anyway. Skip selecting the SAVE_PREV_BL_FDT_ADDR option for the boot0
hook case to avoid crashing with the clobbered register value.
Fixes: 059d526af312 ("mach-snapdragon: generalise board support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by:
Link: https://lore.kernel.org/r/20250407-db410c-fixes-v1-1-524aefbc8bb4@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Some Qualcomm boards feature reserved ranges of pins which are protected
by firmware. Attempting to read or write any registers associated with
these pins results the board resetting.
Add support for parsing these ranges from devicetree and ensure that the
pinctrl and GPIO drivers don't try to interact with these pins.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250410-topic-sm8x50-pinctrl-reserved-ranges-v2-1-654488392b9a@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
As current design, only Manager CPU called armv8_setup_psci() before
jump to next stage(such as Linux Kernel), Subordinate CPUs also need
setup psci vector to handle trap request which comes from higher EL
level.
Signed-off-by: Xu Zhang <423756212@qq.com>
[trini: Guard with !CONFIG_XPL_BUILD check]
This data was generated using the ksswtool-autogen project with the
followig commit:
eed7492 ("soc: am62ax: Add cpsw_3guss_main_0 id to the dev list")
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Don't initialize Ethernet2 in SPL. We cannot boot from that source anyways
and it throws an error during boot.
This will remove following error message during network boot:
Error: ethernet@8000000port@2 No valid MAC address found.ethernet@8000000port@1
Waiting for PHY auto negotiation to complete....... done
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add bootph-all tag to phy_gmii_sel node. This is needed for booting via
Ethernet. While at it, drop main_pktdma reg redefinitions which are already
provided by the top-level SoC device tree file.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
The fdt_node_check_compatible() function returns 0 on success which is
pretty confusing, and we were using it wrong!
Invert the condition check and refactor things to be more readable.
Additionally, add the check for the RB1 which needs the same fixup as
the RB2.
Reported-by: Sam Day <me@samcday.com>
Fixes: e64503f1fcdf ("mach-snapdragon: implement ft_board_setup() for USB role selection")
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Tested-by: Sam Day <me@samcday.com>
Link: https://lore.kernel.org/r/20250331104327.321339-1-caleb.connolly@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The length of a property includes '\0' in a string type one, so
the length passed by needs to have that in account, if not,
when getting the property value it will fail because it
has the wrong size.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Tested-by: caleb.connolly@linaro.org # db845c
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250227094911.497219-2-rui.silva@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This is required for gadget modes to work on most platforms. It must be
disabled for dragonboard410c since that doesn't use dwc3. USB on other
MSM8916 platforms isn't supported by qcom_defconfig anyway.
Link: https://lore.kernel.org/r/20250324-sdm845-fixes-fastboot-v1-3-d177a10f336d@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Compared to SAM9X5 the only difference is the DPRAM memory from the
USB High Speed Device Port (UDPHS) hardware block was increased,
so we can reuse the same endpoint data.
Also add compatible "microchip,sam9x60-udc".
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250331162611.1557759-2-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Andre Przywara <andre.przywara@arm.com> says:
C's implicit fallthrough behaviour in switch/case statements can lead to
subtle bugs. Quite some while ago many compilers introduced warnings in
those cases, requiring intentional fallthrough's to be annotated.
So far we were not enabling that compiler option, so many ambiguities
and some bugs in the code went unnoticed.
This series adds the required annotations in code paths that the first
stage of the U-Boot CI covers. There is a large number of cases left
in the libbz2 code. The usage of switch/case is borderline insane there,
labels are hidden in macros, and there are no breaks, but just goto's.
Upstream still uses very similar code, without any annotations. I still
am not 100% sure those are meant to fall through or not, and plan to do
further investigations, but didn't want to hold the rest of the patches
back. You can see for yourself by applying patch 18/18 and building for
sandbox64, for instance.
Because of this we cannot quite enable the warning in the Makefile yet,
but those fixes are worth regardless, and be it to increase readability.
Please note that those patches do not fix anything, really, they just add
those fallthrough annotations, so the series is not really critical.
Link: https://lore.kernel.org/r/20250327153313.2105227-1-andre.przywara@arm.com
The MMC boot mode selection for the TI AM62P series of SoCs uses an
implicit switch/case fallthrough for falling back to some default
boot mode.
Add our "fallthrough;" statement-like macro before the default branch in
the code, to avoid a warning when GCC's -Wimplicit-fallthrough warning
option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Include spl.h to avoid definition errors in custom builds.
Fixes: commit bc07851897bd ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled")
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Currently in j721e_init.c we check which firewalls to remove using
the board configuration (e.g CONFIG_TARGET_J721E_R5_EVM). We do this
as J721e and J7200 have different IP and firewalls but use the same
SoC definition (SOC_K3_J721E) even though they are different SoCs.
The idea was they would be similar enough that they both could use
the same SoC config to help with common code sharing. Board checks
would then be used differentiate.
This has grown far too messy to maintain any more, especially now
that there is more than one board using J721e (EVM, SK, Beagle AI64).
As differentiation is done based on board, every one of these boards
would have to have checks added for them. Instead let's split J7200
support out from J721e like how normal new SoC support is done.
This patch touches several subsystems and could not be split much better
as when we add SOC_K3_J7200 we want to make use of it in all spots that
once used the combined SOC_K3_J721E so we can turn off SOC_K3_J721E when
building for J7200 boards.
Signed-off-by: Andrew Davis <afd@ti.com>
The file k3-am62a7.dtsi is part of upstream DT and should
have been removed when migrating to OF_UPSTREAM but must
have been missed. Do this here.
Signed-off-by: Andrew Davis <afd@ti.com>
Correct the preprocessor directive used to check for 64-bit kernel
support in the `zboot_go` function. The code previously checked for
`CONFIG_X86_RUN_64BIT`, which is not the correct configuration option
for determining if the kernel should run in 64-bit mode. The correct
option is `CONFIG_X86_64`.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
As both CONFIG_X86_RUN_64BIT and X86_RUN_64BIT_NO_SPL cases run U-Boot
in 64-bit mode with the CPU fully initialized already.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit introduces a new configuration option X86_RUN_64BIT_NO_SPL
to allow building U-Boot as a 64-bit binary without using the SPL
(Secondary Program Loader). The motivation is to simplify the boot
process for certain x86-based platforms that do not require SPL, such as
those booting directly from a 64-bit coreboot firmware.
This update revises the `X86_RUN_64BIT` configuration to more accurately
describe its role as "32-bit SPL followed by 64-bit U-Boot." It
clarifies the sequence of operations during the boot process, where the
system transitions from a 32-bit SPL (Secondary Program Loader) to the
main 64-bit U-Boot.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
We currently set both and print both PXN and UXN bits when removing
execution for pages. This happens even in the existing per platform
definitions of 'struct mm_region'.
That's not entirely correct though. For stage-1 translations, if a
platform runs on a translation regime with a single privilege level or the
the translation regime supports two privilege levels and we are not
in EL1&0 with HCR_EL2.{NV, NV1} = {1, 1} only BIT54 (XN) is needed
and BIT53(PXN) is reserved 0.
Currently we support Non-Secure EL2, Non-secure EL2&0 and Non-secure
EL1&0.
We already have get_effective_el() which returns 1 if we are
- Running in EL1 so we assume an EL1 translation regime but without
checking HCR_EL2.{NV, NV1} != {1,1}
- Running in EL2 with HCR_EL2.E2H = 1
The only problem with the above is that if we are in EL1&0 and
HCR_EL2.{NV1, NV} == {1, 1}, then
- Bit[54] holds the PXN instead of the UXN
- The Effective value of UXN is 0
- Bit[53] is RES0
So let's re-use that function and set PXN only when we are in
and EL[2|1]&0 translation regime.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass <sjg@chromium.org> says:
The membuff implementation curently has no tests. It also assumes that
head and tail can never correspond unless the buffer is empty.
This series provides a compile-time flag to support a 'full' flag. It
also adds some tests of the main routines.
The data structure is also renamed to membuf which fits better with
U-Boot.
There may be some cases in the code which could be optimised a little,
but the implementation is functional.
Link: https://lore.kernel.org/r/20250318152059.1464369-1-sjg@chromium.org
Simon Glass <sjg@chromium.org> says:
U-Boot can start and boot an OS in both qemu-x86 and qemu-x86_64 but it
is not perfect.
With both builds, executing the VESA ROM causes an intermittent hang, at
least on some AMD CPUs.
With qemu-x86_64 kvm cannot be used since the move to long mode (64-bit)
is done in a way that works on real hardware but not with QEMU. This
means that performance is 4-5x slower than it could be, at least on my
CPU.
We can work around the first problem by using Bochs, which is anyway a
better choice than VESA for QEMU. The second can be addressed by using
the same descriptor across the jump to long mode.
With an MTRR fix this allows booting into Ubuntu on qemu-x86_64
In v3 some e820 patches are included to make booting reliable and avoid
ACPI tables being dropped. Also, several MTTR problems are addressed, to
support memory sizes above 4GB reliably.
Link: https://lore.kernel.org/all/20250315142643.2600605-1-sjg@chromium.org/
Add some missing pieces to bootparams so that a 64-bit ramdisk address
can be used. Tidy up the logging while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The existing QEMU implementation mostly ignored BLOBLIST_TABLES and
allocates the bulk of the tables with malloc(). Update it to place all
tables in the bloblist. Since QEMU declares a size of 128KB regardless
of the size of its tables, this requires a larger bloblist.
Fix up the e820 table to handle this, keeping the old code as an option
for now, to assist with any future bug-fixing.
Signed-off-by: Simon Glass <sjg@chromium.org>
The existing mechanism is pretty painful as it requires manual
calculations for anything but a trivial setup.
Add a new API for adding e820 entries.
Signed-off-by: Simon Glass <sjg@chromium.org>
QEMU likes to have an MTRR set up, just like real machines. Add an MTRR
which covers the total RAM size.
This does nothing on machines without MTRRs.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present mtrr_add_request() requires that the size is a power of two.
This is too limiting for machines with 4GB (or more) of RAM, since they
often must take account of a memory hole at 3GB.
Update the function to automatically deal with an unaligned size, using
more MTRRs as required.
The algorithm is taken from coreboot commit 60bce10750
Signed-off-by: Simon Glass <sjg@chromium.org>
The CONFIG option is no-longer correct since we can have SPL and PPL
with different bitness.
Fix this and sync up with Linux 6.13 in this area, since this is where
the code came from many years ago.
Signed-off-by: Simon Glass <sjg@chromium.org>
The existing functions work but the register clobbers are wrong, so
strange bugs results.
The original functions were taken from a very old version of Linux.
Update them from Linux 6.13
Signed-off-by: Simon Glass <sjg@chromium.org>
