Adjust the scan for default console stdio device to prefer the
currently selected serial device. This is useful in combination
with CONFIG_SERIAL_PROBE_ALL=y, in which case the system would
instantiate all serial devices as stdio devices in the order in
which they are listed in control DT. The currently selected serial
device may not be the first device listed in DT, in which case the
current console_init_r() implementation unexpectedly switches to
another serial console after listing stderr using "Err:" line, and
just before showing U-Boot shell, which is not the desired behavior.
The scan now iterates over the entire list of stdio devices. If the
current iterator stdio device is the current serial device, or there
is no input or output stdio device assigned to the input or output
stream yet, then the current iterator stdio device is assigned to that
stream. This way, the first suitable stdio device is assigned to the
stream, but the current serial console stdio device can override that
assignment.
As a small optimization, if the current iterator stdio device is the
current serial device and both input and output streams as assigned,
then the loop can terminate, because the current serial device has a
chance to be used as a stdio device at this point.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
As exposed by "make randconfig", we have an issue around SPL_BLK_FS.
This is functionally a library type symbol that should be selected when
required and select what it needs. Have SPL_BLK_FS select SPL_FS_LOADER
and then SPL_NVME will now correctly select SPL_FS_LOADER via
SPL_BLK_FS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Introduce new mode of relocation which relocates only data, not code.
This is mainly meant to relocate data to read-write portion of the RAM,
while the code remains in read-only portion of the RAM from which it is
allowed to execute. This split configuration is present on various secure
cores.
The result of the relocation is U-Boot running at its original address,
data relocated to the end of DRAM, but with added read-write area offset.
The U-Boot binary area is not reserved from the end of the DRAM in this
relocation mode, because U-Boot itself is not relocated.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Richard Genoud <richard.genoud@bootlin.com> says:
SquashFS has support in U-Boot, but not in SPL.
This series adds the possibility for the SPL to load files from SquashFS
partitions.
This is useful, for instance, when there's a SquashFS rootfs containing
U-Boot binary.
NB: falcon mode is not supported yet.
Link: https://lore.kernel.org/r/20260313104229.1555236-1-richard.genoud@bootlin.com
spl_mmc_do_fs_boot supports now loading an image from squashfs.
Also, convert #if defined(CONFIG_SPL_xx) to if (CONFIG_IS_ENABLED(xx))
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: João Marcos Costa <joaomarcos.costa@bootlin.com>
Implement spl_load_image_sqfs() in spl code.
This will be used in MMC to read a file from a squashfs partition.
Also, loosen squashfs read checks on file size by not failing when a
bigger size than the actual file size is requested. (Just read the file)
This is needed for FIT loading, because the length is ALIGNed.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: João Marcos Costa <joaomarcos.costa@bootlin.com>
Quentin Schulz <quentin.schulz@cherry.de> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/20251120-legacy-led-removal-v1-0-369d44338358@cherry.de
No user of the legacy LED API anymore (except Sunxi with the PinePhone
but that is now a Sunxi-specific implementation), so let's remove
anything related.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
DFU:
* Make DFU_WRITE_ALT symbol available outside of DFU
* Fix PCI subclass_code warning in spl_dfu
Usb Gadget:
* Mark udc_disconnect() as static
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEELulCp7Yfar5TE60AGQ0dtGZOGTUFAmm30KoACgkQGQ0dtGZO
GTWrJQf/WhaPujo6FMhEMNhJuaZ6ASYwvxAE4L0MJ+cUv4TeF9N3hq22LJllnqIV
yIOQUtxcQaTpw/aBR4KFDAuDu91CsdVnWtkC8FgBup104LvDkoSsTHgBtpFE4Bdj
h+kYd5t4Se22M/c4sOPBqJNyLwIB1EZBq/JqfVuJ0rBp3GW9tdnSnJM6bDk7zsr9
lBd6ZFUh/vMy3HmITxKz0/JRDpAcxlkUzZg/EVzVWe1MNxaDifJ7Sg4WecX6dfWQ
qPewn4L398IUvr6RFs1XcjORbuaHOYIFP5jN0MhXvmm0QTelwIX+OzX5RHxWhhhA
lQpcP2kyOxKGLdenLd/jbStBq1SwvQ==
=BDza
-----END PGP SIGNATURE-----
Merge tag 'u-boot-dfu-20260316' of https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-20260316
DFU:
* Make DFU_WRITE_ALT symbol available outside of DFU
* Fix PCI subclass_code warning in spl_dfu
Usb Gadget:
* Mark udc_disconnect() as static
On Xilinx MB-V there is a need to use ELF file for SPL which is placed
in BRAM (Block RAM) because tools for placing code to bitstream requires to
use ELF. That's why introduce SPL_REMAKE_ELF similar to REMAKE_ELF option
as was originally done by commit f4dc714aaa2d ("arm64: Turn u-boot.bin back
into an ELF file after relocate-rela").
There is already generic and simple linker script (arch/u-boot-elf.lds)
which can be also used without any modification.
Signed-off-by: Michal Simek <michal.simek@amd.com>
When CONFIG_SPI_FLASH_SOFT_RESET is enabled, spi_nor_remove() is called
after spl_load() to switch the flash back to legacy SPI mode. However,
the return value of spi_nor_remove() unconditionally overwrites the
return value of spl_load(), discarding any load error.
Fix this by preserving the spl_load() error and only propagating the
spi_nor_remove() error as a fallback. Also log a message when
spi_nor_remove() fails, since in the case where spl_load() already
failed its error would otherwise be silently discarded.
Signed-off-by: Dimitrios Siganos <dimitris@siganos.org>
The subclass_code member of the pci_ep_header structure is a 1-byte
field. The macro PCI_CLASS_MEMORY_RAM is a concetation of baseclass_code
and subclass_code as follows:
PCI_BASE_CLASS_MEMORY: 0x05
Subclass Code for RAM: 0x00
PCI_CLASS_MEMORY_RAM: 0x0500
Hence, instead of extracting it via an implicity type conversion from int
to u8 which throws a warning, explicitly mask the bits to extract the
subclass_code.
Fixes: cde77583cf0b ("spl: Add support for Device Firmware Upgrade (DFU) over PCIe")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # am62x_evm_a53
Link: https://lore.kernel.org/r/20260305103815.999886-1-s-vadapalli@ti.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Add minimal infrastructure to build SPL images with support for UFS
storage devices. This also pulls in SCSI support and charset functions,
which are dependencies of the UFS code.
With this, only a fixed offset is supported for loading the next image,
which should be specified in CONFIG_SPL_UFS_RAW_U_BOOT_SECTOR as the
number of 4096-byte sectors into the UFS block device.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20260120-rk3576-ufs-v5-1-0edb61b301b7@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The bootmenu_conv_key() function is shared with expo subsystem for key
input. Adding alphanumeric-to-BKEY_SHORTCUT conversion there causes expo
to swallow typed characters instead of inserting them as text, since
BKEY_SHORTCUT falls in the range that expo treats as a command key
rather than passing through.
Move the shortcut-key detection into bootmenu_loop() where it is
only used in the bootmenu context.
Fixes: 8c986521c3c9 ("cmd: bootmenu: permit to select bootmenu entry with a shortcut")
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The get_ram_size() function fails to restore the original RAM data when
the data cache is enabled. This issue was observed on an AM625 R5 SPL
with 512MB of RAM and is a regression that became visible with
commit bc07851897bd ("board: ti: Pull redundant DDR functions to a common
location and Fixup DDR size when ECC is enabled").
Observed boot failure messages:
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Authentication passed
Starting ATF on ARM64 core...
The system then hangs. This indicates that without a data cache flush,
data in the cache is not coherent with RAM, preventing the system from
booting. This was verified by printing the content of this address when
the issue occurs.
Add a data cache flush after each restore operation to resolve this
issue.
Fixes: bc07851897bd ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled")
Fixes: 1c64b98c1ec4 ("common/memsize.c: Fix get_ram_size() when cache is enabled")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Currently when CONFIG_SPL_STACK_R and CONFIG_SPL_SYS_MALLOC_SIMPLE is
enabled then spl_relocate_stack_gd() will setup a layout where the stack
lays inside the heap and grows down to heap start. Also the global data
is part of the heap. This can lead to corruption of stack and global
data. The current layout is:
0x0 +-------------+
. .
. .
gd->malloc_base +- - - - - - -+
| |\
| HEAP/STACK | \
| | } SPL_STACK_R_MALLOC_SIMPLE_LEN
gd->start_addr_sp +- - - - - - -+ / (gd->malloc_limit)
| GLOBAL DATA |/
CONFIG_SPL_STACK_R_ADDR +-------------+
The above broken layout was actually introduced with commit adc421e4cee8
("arm: move gd handling outside of C code").
This commit changes the layout so that the stack is below the heap and
the global data. It is now similar to the one before relocation:
0x0+-------------+
. .
. .
+- - - - - - -+
| |
| STACK |
| |
gd->start_addr_sp +-------------+
| GLOBAL DATA |
gd->malloc_base +-------------+
| |\
| HEAP | } SPL_STACK_R_MALLOC_SIMPLE_LEN
| |/ (gd->malloc_limit)
CONFIG_SPL_STACK_R_ADDR +-------------+
Fixes: adc421e4cee8 ("arm: move gd handling outside of C code")
Cc: Tom Rini <trini@konsulko.com>
Cc: Anshul Dalal <anshuld@ti.com>
Cc: Leo Yu-Chi Liang <ycliang@andestech.com>
Cc: Dhruva Gole <d-gole@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Ronald Wahl <ronald.wahl@legrand.com>
Add simple test for zip/unzip/gzwrite commands. The test works as
follows. First, create three buffers with a bit of space between
each of them, fill them with random data, then compress data in
buffer 1 into buffer 2, decompress data in buffer 2 either directly
into buffer 3 or into MMC 1 and then read them back into buffer 3,
and finally compare buffer 1 and buffer 3, they have to be identical.
The buffers are filled with random data to detect out of bounds writes.
Test for various sizes, both small and large and unaligned.
The test uses ut_assert_skip_to_line() to skip over gzwrite progress
bar. Since the progress bar updates fill up the console record buffer,
increase the size of it to compensate.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
This patch set primarily removes unused DECLARE_GLOBAL_DATA_PTR
instances.
Many files declare DECLARE_GLOBAL_DATA_PTR and include
asm/global_data.h even though gd is never used. In these cases,
asm/global_data.h is effectively treated as a proxy header, which is
not a good practice.
Following the Include What You Use principle, files should include
only the headers they actually depend on, rather than relying on
global_data.h indirectly. This approach is also adopted in Linux kernel
[1].
The first few patches are prepartion to avoid building break after
remove the including of global_data.h.
A script is for filtering the files:
list=`find . -name "*.[ch]"`
for source in ${list}
do
result=`sed -n '/DECLARE_GLOBAL_DATA_PTR/p' ${source}`
if [ "${result}" == "DECLARE_GLOBAL_DATA_PTR;" ]; then
echo "Found in ${source}"
result=`sed -n '/\<gd\>/p' ${source}`
result2=`sed -n '/\<gd_/p' ${source}`
result3=`sed -n '/\<gd->/p' ${source}`
if [ "${result}" == "" ] && [ "${result2}" == "" ] && [ "${result3}" == "" ];then
echo "Cleanup ${source}"
sed -i '/DECLARE_GLOBAL_DATA_PTR/{N;/\n[[:space:]]*$/d;s/.*\n//;}' ${source}
sed -i '/DECLARE_GLOBAL_DATA_PTR/d' ${source}
sed -i '/global_data.h/d' ${source}
git add ${source}
fi
fi
done
[1] https://lpc.events/event/17/contributions/1620/attachments/1228/2520/Linux%20Kernel%20Header%20Optimization.pdf
CI: https://github.com/u-boot/u-boot/pull/865
Link: https://lore.kernel.org/r/20260209-cleanup-v2-0-73a3a84ddbdb@nxp.com
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>
TARGET namespace is for machines / boards / what-have-you that
building U-Boot for. Simply replace from TARGET to ARCH
make things more clear and proper for ALL SoCFPGA.
Signed-off-by: Brian Sune <briansune@gmail.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
# Conflicts:
# drivers/ddr/altera/Makefile
The net_loop() currently conflates return value with file size
at the end of successful transfer, in NETLOOP_SUCCESS state.
The return type of net_loop() is int, which makes this practice
workable for file sizes below 2 GiB, but anything above that will
lead to overflow and bogus negative return value from net_loop().
The return file size is only used by a few sites in the code base,
which can be easily fixed. Change the net_loop() return value to
always be only a return code, in case of error the returned value
is the error code, in case of successful transfer the value is 0
or 1 instead of 0 or net_boot_file_size . This surely always fits
into a signed integer.
By keeping the return code 0 or 1 in case of successful transfer,
no conditionals which depended on the old behavior are broken, but
all the sites had to be inspected and updated accordingly.
Fix the few sites which depend on the file size by making them
directly use the net_boot_file_size variable value. This variable
is accessible to all of those sites already, because they all
include net-common.h .
Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Options which deal with memory locations and have a default value of 0x0
are dangerous, as that is often not a valid memory location. Rework
SPL_LOAD_FIT_ADDRESS as follows:
- Add SPL_HAS_LOAD_FIT_ADDRESS to guard prompting the question as the
case of loading a FIT image does not strictly require setting an
address and allows for a malloc()'d area to be used.
- For SPL_RAM_SUPPORT, select the new guard symbol if SPL_LOAD_FIT is
enabled because in that case an address must be provided.
- Update defconfigs for these new changes. Largely this means some
defconfigs need to enable SPL_HAS_LOAD_FIT_ADDRESS to maintain their
current status. In the case of sandbox, we also need to set
SPL_LOAD_FIT_ADDRESS to 0x0.
Signed-off-by: Tom Rini <trini@konsulko.com>
README.falcon was converted to ReST/HTML in 2023.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When SPL_NET is included, scripts/Makefile.xpl includes net/. However,
in this directory, the Makefile only compiles things if CONFIG_NET or
CONFIG_NET_LWIP is defined (it doesn't use $(PHASE_)). Therefore, at
least one networking stack needs to be enabled for SPL_NET=y to do
anything meaningful.
In certain cases (e.g. am62px_evm_r5_ethboot_defconfig + NO_NET=y via
menuconfig), it is possible to fail the build with undefined references
(since include/net-common.h does check with CONFIG_IS_ENABLED(NET) which
would be true for SPL_NET, but the implementation wouldn't be compiled).
Fix this oversight by making sure a network stack (and the legacy one)
is available when selecting SPL_NET.
Fixes: 8cb330355bd5 ("net: introduce alternative implementation as net/lwip/")
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This series from Andrew Davis <afd@ti.com> makes a number of the TI K3
CONFIG symbols have consistent values in SPL, as they are things
determined by the SoC and not the board design.
Link: https://lore.kernel.org/r/20251208190635.2044082-1-afd@ti.com
These are common for all K3 based boards. Add the common values as
defaults and remove from each board defconfig.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Seems the "generous 2MB space" is no longer enough for SPL on some K3 R5
platforms so let's increase this to 4MB. That matches what we give to
ARM64 SPL, so combine these.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
The variable bmp_load_addr is used to hold the address in memory of
where to put the splash image (as a bmp). For 32/64bit correctness, this
needs to be a ulong and not u32 today.
Signed-off-by: Tom Rini <trini@konsulko.com>
SPL_BOOTROM_SUPPORT currently doesn't specify it enables returning to
BootROM *from SPL*, which TPL_BOOTROM_SUPPORT does say. So let's align
the prompts so that both say from which stage you can return to the
BootROM.
Fixes: 225d30b70846 ("spl: add a 'return to bootrom' boot method")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
xilinx:
- Sync ESRT with detected GUID
- DT cleanups
- Add logic for FRU information multiple times
- Enable more drivers pca9541, usb5744
- Enable more commands
- Cleanup firmware DT bindings
firmware:
- Add enhancement SMC format support
clk/versal:
- Various cleanups
- Add support for Versal Gen 2
i2c:
- cdns: Add timeout for RXDV status bit polling
spi:
- cadence: Remove cdns,is-dma DT property
- cadence: Remove duplicated return
- cadence_versal: Update flash reset delay
memtop:
- Update max memory reserved spaces to 64
Versal Gen 2:
- Aligned addresses with default memory map
- Add support for reading multiboot value
MB-V:
- Make SPL smaller
- Add support for SPI
- Move SPL to run out of BRAM
ZynqMP:
- Change default load address for BL32
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSXAixArPbWpRanWW+rB/7wTvUR9QUCaUUtkwAKCRCrB/7wTvUR
9ZtFAPwIObXr8YTPrvBp2zWwUCPn2tCxnj1Mgs2WclBSpydfhgEAxilAU/As2SZs
hGpVpWSsb9XGlwqJ0/0+CeZEDC4oNgE=
=E9f9
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2026.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
AMD/Xilinx/FPGA changes for v2026.04-rc1
xilinx:
- Sync ESRT with detected GUID
- DT cleanups
- Add logic for FRU information multiple times
- Enable more drivers pca9541, usb5744
- Enable more commands
- Cleanup firmware DT bindings
firmware:
- Add enhancement SMC format support
clk/versal:
- Various cleanups
- Add support for Versal Gen 2
i2c:
- cdns: Add timeout for RXDV status bit polling
spi:
- cadence: Remove cdns,is-dma DT property
- cadence: Remove duplicated return
- cadence_versal: Update flash reset delay
memtop:
- Update max memory reserved spaces to 64
Versal Gen 2:
- Aligned addresses with default memory map
- Add support for reading multiboot value
MB-V:
- Make SPL smaller
- Add support for SPI
- Move SPL to run out of BRAM
ZynqMP:
- Change default load address for BL32
- meson_gx_mmc: reduce maximum frequency
- Add support for EFI capsule updates on all Amlogic boards
-----BEGIN PGP SIGNATURE-----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=sxXr
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20251219' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- Add u-boot SPL support for GX SoCs
- meson_gx_mmc: reduce maximum frequency
- Add support for EFI capsule updates on all Amlogic boards
Crashes are occurring due to the number of reserved memory regions
exceeding the current maximum limit of 16. It is recommended to
increase the supported number of memory regions to 64, as newer
platforms may utilize more reserved regions.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d9f73d26af832e19dfd79a4b7bfcf09c498a4873.1764169780.git.michal.simek@amd.com
This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776
Highlights:
*
SPL / MMC:
o
Fix Kconfig handling for
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
o
Correct raw sector calculations and respect explicit sector values
when loading U-Boot from MMC in SPL
o
Adjust raw MMC loading logic for SoCFPGA platforms
*
EFI boot:
o
Permit EFI booting on SoCFPGA platforms
o
Disable mkeficapsule tool build for Arria 10 where unsupported
*
Agilex5:
o
Upgrade SDHCI controller from SD4HC to SD6HC
o
Enable MMC and Cadence SDHCI support in defconfig
o
Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
o
Revert incorrect GPIO configuration for SDIO_SEL
o
Refine U-Boot DT handling for SD and eMMC boot variants
*
SPI:
o
Allow disabling the DesignWare SPI driver in SPL via Kconfig
*
Board / configuration fixes:
o
Enable random MAC address generation for Cyclone V
o
Fix DE0-Nano-SoC boot configuration
o
Remove obsolete or conflicting options from multiple legacy
SoCFPGA defconfigs
This function and the sector parameter evolved over the time. By now,
sector is influenced by spl_mmc_get_uboot_raw_sector which allows to
adjust the read sector with an offset that U-Boot proper may have inside
the partition. That used to work by chance if both
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR and
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION were enabled. Since
2a00d73d081a they are a choice, and we need to drop the condition to
maintain this feature.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Add SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE as condition where so
far SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION was enough - though often
by chance as both options were enabled.
Reorder the #ifdef blocks at this chance to follow the order in the
Kconfig menu.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
We need to explicitly select SPL_LOAD_BLOCK when USE_PARTITION_TYPE is
enabled, just like the other choices do.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Enforce the max size for U-Boot SPL at the Kconfig level, to prevent the
build system from producing an image too large for the bootROM to load.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251126-spl-gx-v5-9-6cbffb2451ca@postmarketos.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
To support booting Linux from MMC, the file name should be
set up correctly. To support booting Linux from Parallel Flash,
the SPL_LOAD_FIT_ADDRESS should point to the Parallel Flash.
Signed-off-by: Randolph <randolph@andestech.com>
Commit 5f70be08b015 ("Fix autoboot countdown printing wrong") introduces
inconsistency in how the countdown is displayed. For example, in case
when BOOTDELAY=5, the next output is observed during the boot:
Hit any key to stop autoboot: 5
Hit any key to stop autoboot: 4
Hit any key to stop autoboot: 3
That happens due to different printf format (%2d vs %1d). Moreover, the
mentioned commit fails to handle the case when the user is holding some
key before the countdown is shown. E.g. if BOOTDELAY=101, the next
malformed output is being produced:
Hit any key to stop autoboot: 1 0
That's because the fast path code wasn't modified accordingly, and still
tries to erase the number using '\b\b\b' format.
Fix both issues by introducing a dedicated routine for printing the
whole countdown line.
Fixes: 5f70be08b015 ("Fix autoboot countdown printing wrong")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: David Zang <davidzangcs@gmail.com>
To the exception of red_led_on in the arm-specific assembly code, all
code interacting with the red status LED was guarded by the
CONFIG_LED_STATUS_RED symbol, which is enabled in none of the upstream
defconfigs.
Since the last board which overrode the weak red_led_on function got
migrated to the new LED mechanism, there's also no user of the
arm-specific assembly code anymore, therefore it can be removed along
the other unreachable code sections.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
The last user of it was removed in a previous commit so let's remove its
support entirely.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
The code is guarded by a condition none of the defconfigs meet (that is
CONFIG_SYS_FAULT_ECHO_LINK_DOWN and CONFIG_LED_STATUS_RED both enabled),
so we can remove the unreachable code sections.
When doing that, there's no caller for miiphy_link anymore, so it can be
removed.
This in turns makes CONFIG_SYS_FAULT_ECHO_LINK_DOWN and
CONFIG_SYS_FAULT_MII_ADDR unused so they are removed as well.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The last user of coloured_LED_init has been recently removed, so we can
remove all places it's called and defined as it does nothing now.
Nobody makes use of the yellow and blue status LEDs from the legacy API,
so let's remove all references to it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Heiko Schocher <hs@nabladev.com> says:
Add SM3 secure hash, as specified by OSCCA GM/T 0004-2012 SM3 and described
at https://datatracker.ietf.org/doc/html/draft-sca-cfrg-sm3-02
TPMv2 defines hash algo sm3_256, which is currently
not supported and prevented TPMv2 chip with newer
firmware to work with U-Boot. Seen this on a ST33TPHF2XI2C
u-boot=> tpm2 init
u-boot=> tpm2 autostart
tpm2_get_pcr_info: too many pcrs: 5
Error: -90
u-boot=>
Implement sm3 hash, so we can fix this problem.
Link: https://lore.kernel.org/r/20251118043042.27726-1-hs@nabladev.com
