Today we typically enable CMD_SATA in order to have the SATA
functionality itself enabled, despite there being a clean split between
the two symbols. This in turn leads to potential configuration problems.
Split things so that SATA continues to be separate and not CMD_SATA
instead depends, functionally, on AHCI being enabled.
To do all of this:
- Have X86 select AHCI directly rather than "default y" it later.
- Make CMD_SATA be a default y option, given the split of platforms that
enabled SATA and did, or did not, enable CMD_SATA.
- Change "imply CMD_SATA" to "imply SATA"
- Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL
without PCI (and in turn, SATA is needed for SATA_SIL).
- Update a number of defconfigs to have no functional change.
Signed-off-by: Tom Rini <trini@konsulko.com>
It is not functionally possible to use the code enabled by
PARTITION_TYPE_GUID without having EFI_PARTITION be enabled as well. Not
all users of the former had ensured that the latter was enabled however,
so audit all current users and then as appropriate select or imply
EFI_PARTITION as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issues around a number of
symbols that we select without making sure to also select their
prerequisite symbols. Add these missing symbols.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Allow CONFIG_OF_UPSTREAM to receive automatic device tree updates for
the Toradex SMARC iMX95.
Remove the now obsolete device tree files:
- imx95-toradex-smarc-dev.dts
- imx95-toradex-smarc.dtsi
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing
PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it
to the existing board-code "phycore_imx93", and rename that board to
"phycore_imx91_93" to reflect the dual SoCs support. While at it, also
rename and change common files accordingly. This way i.MX91 and i.MX93
SoC variants of the phyCORE SoM share most of the code and documentation
without duplication, while maintaining own device-tree and defconfigs
for each CPU variant.
Supported features:
- 1GB LPDDR4 RAM
- Debug UART
- EEPROM
- eMMC
- Ethernet
- SD-card
- USB
Product page SoM:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
As exposed by "make randconfig", we have an issue with the dependencies
for REGMAP (and xPL variants). As this is a library function, it should
always be selected and not depended on by other functionality. This is
largely done correctly today, so just correct the few outliers.
Acked-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue around how
SYSRESET_CMD_POWEROFF is typically selected. We cannot rely only on
CMD_POWEROFF as SYSRESET_CMD_POWEROFF must also be tested for its own
dependency of SYSRESET.
Signed-off-by: Tom Rini <trini@konsulko.com>
Introduce new mode of relocation which relocates only data, not code.
This is mainly meant to relocate data to read-write portion of the RAM,
while the code remains in read-only portion of the RAM from which it is
allowed to execute. This split configuration is present on various secure
cores.
The result of the relocation is U-Boot running at its original address,
data relocated to the end of DRAM, but with added read-write area offset.
The U-Boot binary area is not reserved from the end of the DRAM in this
relocation mode, because U-Boot itself is not relocated.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The code in the __XSCALE__ section is unused, since there is no more
XScale support in U-Boot. Remove the stale code. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The ARM32 has PLx Privilege Levels instead of Exception Levels present
on ARM64. Introduce current_pl() function which reports the current PL
on ARM32.
Introduce current_el() for ARM32 as well and current_pl() for ARM64
which each call the other matching function. This is mainly mean to
allow code like this to compile and retain compile time code coverage:
if (IS_ENABLED(CONFIG_ARM64) && current_el() != 3) { ... }
if (!IS_ENABLED(CONFIG_ARM64) && current_pl() != 0) { ... }
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
k3_falcon_fdt_fixup is used to perform fdt fixups at runtime in falcon
mode such as adding bootargs. Currently the function is only accessible
to the R5 SPL but could be useful for A53 SPL based falcon mode setups
as well.
Therefore this patch moves the function from r5/common.c to common.c.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
The reserved memory sizes for ATF and OPTEE were hard-coded for K3
devices, this patch replaces them with a Kconfig option allowing for
easier modifications.
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
As exposed by "make randconfig", some symbols such as
XILINX_MICROBLAZE0_PVR can be set without TARGET_MICROBLAZE_GENERIC but
have a transitive dependency on it. The easiest path of resolution here
is that since there is only one valid microblaze "board", rework that
symbol to be non-optional.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260317012412.4162279-1-trini@konsulko.com
Align with existing Linux Tegra device trees to simplify using U-Boot
device trees as a base for future Linux adaptations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Remove interrupt and GPIO controller properties from MAX8907 node since
the PMIC does not have any GPIO cells and does not expose any interrupt
features.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Mot based devices use LM3532 LED controller with 3 sources. Panel
backlight uses LED 0 while keypad uses LED 1 and 2. Adjust device tree
accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add debug log prints with a message that SKU is unknown.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Until now all Tegra chips except Tegra20 had a fallback if SKU is not
known. This caused issues previously when certain SKU wasn't known. Add a
fallback for Tegra20 aligning it with other Tegra SoC generations.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add definition for Tegra20 SKU 0x4 / A04 found in Sony Tablet P.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Simon Glass <sjg@chromium.org> says:
Each arch does something slightly different before booting the OS. Some
archs even do different things depending on the CPU type.
It is quite hard to know what actually happens in the final milliseconds
before the OS boot.
This series attempts to start cleaning up U-Boot in this area.
The basic intent is to create a new bootm_final() function which can be
called by all archs. It provides some flags for a couple of necessary
variations but otherwise it is generic.
All architectures are converted over to use this new function.
board_quiesce_devices() is moved into bootm_final() so that all archs
benefit from it.
This series fixes a bug in device_remove() is fixed where removing a
parent with specialised flags (e.g. DM_REMOVE_ACTIVE_ALL) could leave
children activated, since they do not match the flags. This fixes is
needed to avoid bootm_final() causing test failures on sandbox.
Future work could take this a little further:
- Convert EFI loader to use the same function
- Improve comments for cleanup_before_linux() across architectures
- Support fake-run tracing on all archs
Link: https://lore.kernel.org/r/20260306023638.2678886-1-sjg@chromium.org
Add a call to bootm_final() before the simulated kernel jump. This
adds the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on sandbox.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on Xtensa.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on SH.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on Nios2.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on m68k.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Tested-by: Angelo Dureghello <angelo@kernel-space.org>
Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Replace the open-coded bootstage_fdt_add_report() and
bootstage_report() with a call to bootm_final(). This also adds the
"Starting kernel" message, board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on
PowerPC.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Replace the open-coded bootstage_fdt_add_report() and
bootstage_report() with a call to bootm_final(). This also adds the
"Starting kernel" message, board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on MIPS.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Replace the open-coded printf and bootstage_mark_name with a call to
bootm_final(). This also adds board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on
MicroBlaze.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Replace the open-coded printf and bootstage_mark_name with a call to
bootm_final(). This also adds board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on ARC.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The ARM announce_and_cleanup() duplicates the common pre-boot steps.
Replace it with a call to bootm_final().
Drop the ARM weak board_quiesce_devices() definition since it is now
called from bootm_final() and the generic weak definition in bootm.h
is used instead.
Note that the printf() ordering changes slightly: it now prints before
bootstage processing rather than after, matching x86 and RISC-V.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The RISC-V announce_and_cleanup() duplicates the common pre-boot
steps. Replace it with a call to bootm_final().
Move board_quiesce_devices() into bootm_final() so it is available to
all architectures. Drop the RISC-V weak definition and header
declaration since the generic one in bootm.h is used instead.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The x86 code in bootm_announce_and_cleanup() is very similar to the new
bootm_final() function, so just use the latter.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Quentin Schulz <quentin.schulz@cherry.de> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/20251120-legacy-led-removal-v1-0-369d44338358@cherry.de
No user of the legacy LED API anymore (except Sunxi with the PinePhone
but that is now a Sunxi-specific implementation), so let's remove
anything related.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This migrates the last user of the legacy LED API, IMX233-OLinuXino, to
the modern LED framework.
The current implementation does the following:
- lit the LED when booting,
- turn off the LED the moment a BOOTP packet is received,
The first step is easily reproduced by using the
/options/u-boot/boot-led property to point at the LED. Unfortunately,
the boot-led is only lit by U-Boot proper at the very end of the boot
process, much later than currently. We can however force the LED on
whenever the GPIO LED driver is bound by marking the LED as
default-state = "on", and this happens slightly before board_init() is
called. We then do not need /options/u-boot/boot-led property for that
anymore.
However, the second step relies on /options/u-boot/boot-led and
CONFIG_LED_BOOT being set to reproduce the same behavior and requires us
to migrate net/bootp.c to the modern LED framework at the same time to
keep bisectability.
I couldn't figure out how to map CONFIG_LED_STATUS_BIT=778 to an actual
GPIO on the SoC but according to the schematics[1] only one LED is
present. I couldn't also map the SoC pin number to an actual GPIO from
the IMX23 manual, but there's already one GPIO LED specified in the
Device Tree so my guess is all of those are one and the same.
This was only build tested as I do not own this device.
[1] https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/iMX233-OLinuXino-Mini/1.%20Latest%20hardware%20revision/iMX233-OLINUXINO-MINI%20hardware%20revision%20E/iMX233-OLINUXINO-MINI_Rev_E.pdf
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
For once, replacing the legacy LED API with a more lean alternative,
just for sunxi's SPL. IIUC, this would be one step closer to dropping
this deprecated subsystem altogether.
Also adding two DRAM cleanups for the A133 SoC. There is a third patch
which requires some changes, will care about that later.
Gitlab CI passed, and I booted that briefly on an A133 board and some
board with a GPIO controlled power LED.
There is a mistmatch between Allwinner's dram_para BSP definitions and the
parameters names in mainline u-boot for TPR1-3. What we call TPR1 is actually
MR22 while TPR2 is TPR0 and TPR3 is TPR1. MR22 does get written to the
corresponding register. This only concerns LPDDR4 support.
Introduce a new Kconfig entry for MR22 and proceed with the rename.
Update the only config currently using it.
See the list of parameters from the Allwinner BSP at the end of:
https://linux-sunxi.org/A133/DRAMC
Note that the H616/H6 code is coherent with this new TPR0 definition
(and does not use TPR1 and MR22).
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Sponsored-by: MEC Electronics GmbH <https://www.mec.at/>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Some of the offsets for the DRAM PHY dx delays are wrong (as compared
to the H616 code and the reference binary) since the
mctl_phy_dx_delay0_inner function does not perform the correct
calculation for some of them.
Introduce a mctl_phy_dx_delay0_inner0 to fix the incorrect offsets and
rename the existing function to mctl_phy_dx_delay0_inner1 for the
offsets it correctly handles.
Also add memory barriers that are also present in the H616 code while
at it.
This fixes detection of 4 GiB DRAM on some boards using LPDDR4.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Sponsored-by: MEC Electronics GmbH <https://www.mec.at/>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Bring U-Boot support for the BeagleV-Fire by adding a device tree and
supporting board files etc.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
