Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7c2 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n,
when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so
let's simplify the various checks across the codebase.
SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so
the proper symbol is still defined in SPL whenever needed.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currently there is no possibility to flush stdin after autocommands are
executed. If in the bootcmd the stdin is changed, e.g. from nulldev to
serial, it could happen that junk characters sit in the fifo and appear
on the cli.
Add a option to clear stdin before starting the CLI.
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add configuration for ARMv8-M aarch32 core, which are currently
Cortex-M23/M33 cores. These cores are treated similar to ARMv7-M
cores, except the code has to be compiled with matching compiler
-march=armv8-m.main flag . These cores have no MMU, they have MPU,
which is currently not configured.
Unlike ARMv7-M, these cores have 512 interrupt vectors. While the
SYS_ARM_ARCH should be set to 8, it is set to 7 because all of the
initialization code is built from arch/arm/cpu/armv7m and not armv8.
Furthermore, CONFIG_ARM64 must be disabled, although DTs for devices
using these cores do come from arch/arm64/boot/dts.
To avoid excess duplication in Makefiles, introduce one new Kconfig
symbol, CPU_V7M_V8M. The CPU_V7M_V8M cover both ARMv7-M and ARMv8-M
cores.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Udit Kumar <u-kumar1@ti.com>
The CMD_W1 functionality can only work with both W1 and W1_EEPROM
enabled, so express this dependency in Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Looking at how the saveenv portion of this driver was implemented, it
does not appear that it could actually result in changes being saved on
the remote end. Update Kconfig to disallow CMD_SAVEENV for
ENV_IS_IN_REMOTE and then remove the relevant code.
Signed-off-by: Tom Rini <trini@konsulko.com>
The calls around lmb functions for these commands are not specific to
SYS_BOOT_RAMDISK_HIGH but rather part of the general loading portion of
the command itself currently. Move this dependency to the right spot.
Signed-off-by: Tom Rini <trini@konsulko.com>
Today we typically enable CMD_SATA in order to have the SATA
functionality itself enabled, despite there being a clean split between
the two symbols. This in turn leads to potential configuration problems.
Split things so that SATA continues to be separate and not CMD_SATA
instead depends, functionally, on AHCI being enabled.
To do all of this:
- Have X86 select AHCI directly rather than "default y" it later.
- Make CMD_SATA be a default y option, given the split of platforms that
enabled SATA and did, or did not, enable CMD_SATA.
- Change "imply CMD_SATA" to "imply SATA"
- Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL
without PCI (and in turn, SATA is needed for SATA_SIL).
- Update a number of defconfigs to have no functional change.
Signed-off-by: Tom Rini <trini@konsulko.com>
Pull request net-20260331.
net:
- airoha_eth & pcs_airoha driver fixes
- Rework some symbol dependencies
- dwc_eth_xgmac: Move DMA reset and pad calibration after PHY init
- rtl8169: add support for RTL8125d
- rswitch: Avoid NULL pointer dereference during PHY access
- rswitch: Remap CPU to bus addresses using dev_phys_to_bus()
- phy: dp83867: reset PHY on init to ensure clean state
net-lwip:
- nfs: fix buffer overflow when using symlinks
- tftp: update image_load_addr after successful transfer
[trini: Add missing "if NET" to CMD_DHCP select's CMD_BOOTP]
Signed-off-by: Tom Rini <trini@konsulko.com>
The DHCP command depends on bootp_reset() function, which is implemented
only if CMD_BOOTP is enabled. Select CMD_BOOTP to satisfy the dependency.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
The CMD_PXE functionality can only build with CMD_TFTPBOOT enabled (or
we get undefined references to do_tftpb), so express this dependency in
Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to use NFS with lwIP we need to select PROT_UDP_LWIP.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jerome Forissier <jerome.forissier@arm.com>
Add a 'part dupcheck' subcommand that scans all block devices probed
in U-Boot and reports any partitions sharing the same PARTUUID or
PARTLABEL. This helps detect situations where the same disk image has
been flashed onto multiple boot devices (e.g., USB stick and UFS),
which can lead to unpredictable boot behavior. Duplicate
PARTUUIDs break UUID-based partition lookup in Linux, and duplicate
PARTLABELs cause the wrong partition to be silently selected in
bootscripts that reference partitions by name.
A single collection pass iterates over all block devices using
blk_foreach_probe() and records every partition that carries a UUID
or label into a dynamically allocated alist of struct part_seen
entries (UUID string, name string, device pointer, partition number).
Duplicates are detected by calling detect_duplicates() twice, once
for UUIDs and once for labels. Each call sorts the list with qsort()
using a comparator that places empty fields at the end, then performs
a single linear pass to identify consecutive equal entries as
duplicate groups. Each group is reported with the device name and
partition number of every copy, followed by a per-field summary
count. Per-field counts are used consistently in both the
duplicate-found and no-duplicates paths.
Example output (with duplicates):
=> part dupcheck
Warning: duplicate PARTUUID 1234abcd-01 (2 copies)
found on usb_mass_storage.lun0:1
found on ufs_scsi.id0lun0:1
Found 1 duplicate PARTUUID(s) (2 total copies) among 4 partitions
Warning: duplicate PARTLABEL primary (2 copies)
found on usb_mass_storage.lun0:1
found on ufs_scsi.id0lun0:1
Found 1 duplicate PARTLABEL(s) (2 total copies) among 4 partitions
Example output (mixed: UUID duplicates, no label duplicates):
=> part dupcheck
Warning: duplicate PARTUUID 1234abcd-01 (2 copies)
found on usb_mass_storage.lun0:1
found on ufs_scsi.id0lun0:1
Found 1 duplicate PARTUUID(s) (2 total copies) among 4 partitions
No duplicate PARTLABELs found (3 labels)
Example output (no duplicates):
=> part dupcheck
No duplicate PARTUUIDs or PARTLABELs found (4 UUIDs, 3 labels)
The CONFIG_CMD_PART_DUPCHECK Kconfig option (depends on
CMD_PART and BLK) controls inclusion of this subcommand and is
disabled by default.
Signed-off-by: John Toomey <john.toomey@amd.com>
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
After talking with someone from the NetBSD project, platforms that do
not boot with a device tree (and so would be using our BOOTM_NETBSD
support) a very few in number. So we can remove this option from being
enabled by default and save a little space in most places with platforms
that need it still being able to re-enable it, if needed. Ideally, in a
few years we can instead just remove the code entirely.
Link: https://lore.kernel.org/r/aWKQOW_ajq0DsbYA@big-apple.aprisoft.de/
Signed-off-by: Tom Rini <trini@konsulko.com>
Fix typo with correct spelling of "purposes".
Also change "debug" to "debugging" while touching this since that is
the more common phrasing.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: David Lechner <dlechner@baylibre.com>
README.falcon was converted to ReST/HTML in 2023.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
After the preparatory patches moved most of the NFS code into common
files we now add the code to enable NFS support with lwIP.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Julien Stephan <jstephan@baylibre.com> says:
Commit 2dcf143398ad ("dm: video: Repurpose the 'displayport' uclass to 'display'")
left the display_read_edid() function unused by mistake.
This series addresses that oversight and introduces a new useful cmd.
Patch 1:
- Refactors display_read_timing() to use the existing
display_read_edid() function, eliminating redundant code.
- Marks display_read_edid() as static since it is not used outside of
the file.
Patch 2:
- Adds a new read_edid command, which can be very useful for debugging
or developing new display drivers.
- As this command uses display_read_edid(), the function is made
non-static again.
Link: https://lore.kernel.org/r/20250630-read_edid_cleanup-v1-0-ec7d425472c7@baylibre.com
Add a new command to read EDID info from connected display.
When applicable EDID can also be retrieved by commands such as:
i2c dev x
i2c edid 0x50
but the new read_edid function relies on the implementation of the
read_edid callback from DISPLAY driver.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
The config is wrongly written, result
in only support socdk board.
Fixes: 92dcb3ad5d98 ("cmd/dma: implement dmareset command")
Signed-off-by: Brian Sune <briansune@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Building this code on 64bit platforms leads to warnings (and so errors
in CI). Rather than rework the code, as this is a deprecated filesystem,
don't try and disallow building on 64bit hosts.
Signed-off-by: Tom Rini <trini@konsulko.com>
Anshul Dalal <anshuld@ti.com> says:
Hi all,
We currently make use of CMD_BOOTI and CMD_BOOTZ in the SPL boot flow in
falcon mode, this isn't correct since all CMD_* configs are only meant
for U-Boot proper and not the SPL.
Therefore this patch set adds new LIB_BOOT[IMZ] configs that allow for
more granular selection of their respective compilation targets.
Additionally, this also allows us to more easily disable support for
raw images from secure falcon mode (SPL_OS_BOOT_SECURE) by doing the
following:
config LIB_SPL_BOOTI
...
depends on SPL_OS_BOOT && !SPL_OS_BOOT_SECURE
...
Link: https://lore.kernel.org/r/20251027-fix_cmd_bootx-v10-0-10487e907710@ti.com
Using CMD_* configs from spl doesn't make logical sense. Therefore
this patch replaces the checks for CMD_BOOTx with newly added library
symbols LIB_BOOT[IMZ] and SPL_LIB_BOOT[IMZ] which are enabled by their
respective CMD_* or SPL_* counterparts.
On platforms with non-secure falcon mode, SPL_BOOTZ is enabled by
default for 32-bit ARM systems and SPL_BOOTI is enabled by default for
64-bit ARM and RISCV.
The respective C files (image.c/zimage.c) are compiled based on library
symbols $(PHASE_)LIB_BOOTx instead which are in turn selected by both
CMD_BOOTx and SPL_BOOTx as required.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Kory Maincent (TI.com) <kory.maincent@bootlin.com> says:
This series converts the extension board framework to use UCLASS as
requested by Simon Glass, then adds extension support to pxe_utils
and bootmeth_efi (not tested) to enable extension boards devicetree load
in the standard boot process.
I can't test the imx8 extension scan enabled by the
imx8mm-cl-iot-gate_defconfig as I don't have this board.
I also can't test the efi bootmeth change as I don't have such board.
Link: https://lore.kernel.org/r/20251030-feature_sysboot_extension_board-v5-0-cfb77672fc68@bootlin.com
Remove the legacy extension board implementation now that all boards
have been converted to use the new UCLASS-based framework. This
eliminates lines of legacy code while preserving functionality
through the modern driver model approach.
Update the bootstd tests, due to the removal of extension hunter.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Introduce UCLASS-based extension board support to enable more
standardized and automatic loading of extension board device tree
overlays in preparation for integration with bootstd and pxe_utils.
Several #if CONFIG_IS_ENABLED are used in cmd/extension_board.c to ease the
development but don't worry they are removed later in the series.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Relocate extension board support from cmd/ to boot/ directory in
preparation for converting the extension framework to use UCLASS.
Also improve code style by applying reverse xmas tree ordering.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
It has been over a decade since we had a platform that implemented the
bootp vendor extension support hook. Remove this option due to lack of
use.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
When I migrated this to Kconfig in commit 68e54040ccc3 ("sandbox: Move
CONFIG_IO_TRACE to Kconfig") I didn't look hard enough for other
details. As explained in the README, this is valid for ARM too. So start
by making this be a prompted question and CMD_IOTRACE depend on IO_TRACE
being enabled. Next, migrate the information out of README and in to
the appropriate help text for existing options in Kconfig. Finally, make
this option be default y on SANDBOX but not selected as it's valid to
build without it.
Signed-off-by: Tom Rini <trini@konsulko.com>
This series adds significant and valuable work by Mikhail Kshevetskiy to
align spi-mem with Linux 6.16. It also includes contributions to the mtd
performance patches, a work started by Miquel Raynal and improved by
Mikhail Kshevetskiy. Additionally, two patches tighten dependencies on
the Atmel driver.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/27873
For CMD_IRQ to function, we need enable/disable_interrupt functions as
well as do_irqinfo functions to be defined. Only NIOS2, PowerPC and X86
implement the latter, so correct dependencies to be opt-in not out-out
here.
Signed-off-by: Tom Rini <trini@konsulko.com>
The CMD_MP (and cmd/mp.c) command provide a "cpu" command which is
mutually exclusive from the "cpu" command provided by cmd/cpu.c and the
CPU framework. Make CMD_MP depend on CPU not being enabled.
Signed-off-by: Tom Rini <trini@konsulko.com>
We have a large number of library symbols that should not be prompted
for by the user really but rather selected by the platform (or SoC) as
needed. To start with however, make these depend on !COMPILE_TEST.
Signed-off-by: Tom Rini <trini@konsulko.com>
This adds a new U-Boot command 'c5_pl330_dma' for Cyclone V SoCDK
boards. It provides access to the Reset Manager's Per2ModRst register
to release the reset for ARM PrimeCell PL330 DMA channels. This allows
software to initialize and use the PL330 DMA controller properly after
reset.
Signed-off-by: Brian Sune <briansune@gmail.com>
[trini: Minor style fixes]
Signed-off-by: Tom Rini <trini@konsulko.com>
This patch implements read-only test of nand flash devices.
Test reads blocks of NAND flash in normal and raw modes and compares
results. The following statuses can be returned for a block:
* non-ecc reading failed,
* ecc reading failed,
* block is bad,
* bitflips is above maximum,
* actual number of biflips above reported one,
* bitflips reached it maximum value,
* bitflips above threshold,
* block is ok.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Some nand flashes (like spi-nand one) are registered with mtd
subsystem only, thus nand command can't be used to work with
such flashes. As result some functionality is missing.
This patch implements 'nand torture' functionality for mtd command.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Some nand flashes (like spi-nand one) are registered with mtd
subsystem only, thus nand command can't be used to work with
such flashes. As result some functionality is missing.
This patch implements 'nand markbad' functionality for mtd command.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce the DNS Kconfig symbol so that various network commands may
use host names without the dns command (CMD_DNS) being selected.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: E Shattow <e@freeshell.de>
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27010
- Fix the i.MX8M Nano GPU path.
- Enable RNG support for KASLR on Toradex i.MX8 boards.
- Enable watchdog and clock driver for imx6ulz_smm_m2b.
- Tighten dependencies on CMD_BLOB.
- Remove the rest of i.MX31 support.
In order to build this command we need to have configured some other
board specific features. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
