Currently when CONFIG_SPL_STACK_R and CONFIG_SPL_SYS_MALLOC_SIMPLE is
enabled then spl_relocate_stack_gd() will setup a layout where the stack
lays inside the heap and grows down to heap start. Also the global data
is part of the heap. This can lead to corruption of stack and global
data. The current layout is:
0x0 +-------------+
. .
. .
gd->malloc_base +- - - - - - -+
| |\
| HEAP/STACK | \
| | } SPL_STACK_R_MALLOC_SIMPLE_LEN
gd->start_addr_sp +- - - - - - -+ / (gd->malloc_limit)
| GLOBAL DATA |/
CONFIG_SPL_STACK_R_ADDR +-------------+
The above broken layout was actually introduced with commit adc421e4cee8
("arm: move gd handling outside of C code").
This commit changes the layout so that the stack is below the heap and
the global data. It is now similar to the one before relocation:
0x0+-------------+
. .
. .
+- - - - - - -+
| |
| STACK |
| |
gd->start_addr_sp +-------------+
| GLOBAL DATA |
gd->malloc_base +-------------+
| |\
| HEAP | } SPL_STACK_R_MALLOC_SIMPLE_LEN
| |/ (gd->malloc_limit)
CONFIG_SPL_STACK_R_ADDR +-------------+
Fixes: adc421e4cee8 ("arm: move gd handling outside of C code")
Cc: Tom Rini <trini@konsulko.com>
Cc: Anshul Dalal <anshuld@ti.com>
Cc: Leo Yu-Chi Liang <ycliang@andestech.com>
Cc: Dhruva Gole <d-gole@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Ronald Wahl <ronald.wahl@legrand.com>
TARGET namespace is for machines / boards / what-have-you that
building U-Boot for. Simply replace from TARGET to ARCH
make things more clear and proper for ALL SoCFPGA.
Signed-off-by: Brian Sune <briansune@gmail.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
# Conflicts:
# drivers/ddr/altera/Makefile
Options which deal with memory locations and have a default value of 0x0
are dangerous, as that is often not a valid memory location. Rework
SPL_LOAD_FIT_ADDRESS as follows:
- Add SPL_HAS_LOAD_FIT_ADDRESS to guard prompting the question as the
case of loading a FIT image does not strictly require setting an
address and allows for a malloc()'d area to be used.
- For SPL_RAM_SUPPORT, select the new guard symbol if SPL_LOAD_FIT is
enabled because in that case an address must be provided.
- Update defconfigs for these new changes. Largely this means some
defconfigs need to enable SPL_HAS_LOAD_FIT_ADDRESS to maintain their
current status. In the case of sandbox, we also need to set
SPL_LOAD_FIT_ADDRESS to 0x0.
Signed-off-by: Tom Rini <trini@konsulko.com>
README.falcon was converted to ReST/HTML in 2023.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When SPL_NET is included, scripts/Makefile.xpl includes net/. However,
in this directory, the Makefile only compiles things if CONFIG_NET or
CONFIG_NET_LWIP is defined (it doesn't use $(PHASE_)). Therefore, at
least one networking stack needs to be enabled for SPL_NET=y to do
anything meaningful.
In certain cases (e.g. am62px_evm_r5_ethboot_defconfig + NO_NET=y via
menuconfig), it is possible to fail the build with undefined references
(since include/net-common.h does check with CONFIG_IS_ENABLED(NET) which
would be true for SPL_NET, but the implementation wouldn't be compiled).
Fix this oversight by making sure a network stack (and the legacy one)
is available when selecting SPL_NET.
Fixes: 8cb330355bd5 ("net: introduce alternative implementation as net/lwip/")
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This series from Andrew Davis <afd@ti.com> makes a number of the TI K3
CONFIG symbols have consistent values in SPL, as they are things
determined by the SoC and not the board design.
Link: https://lore.kernel.org/r/20251208190635.2044082-1-afd@ti.com
These are common for all K3 based boards. Add the common values as
defaults and remove from each board defconfig.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Seems the "generous 2MB space" is no longer enough for SPL on some K3 R5
platforms so let's increase this to 4MB. That matches what we give to
ARM64 SPL, so combine these.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
SPL_BOOTROM_SUPPORT currently doesn't specify it enables returning to
BootROM *from SPL*, which TPL_BOOTROM_SUPPORT does say. So let's align
the prompts so that both say from which stage you can return to the
BootROM.
Fixes: 225d30b70846 ("spl: add a 'return to bootrom' boot method")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
- meson_gx_mmc: reduce maximum frequency
- Add support for EFI capsule updates on all Amlogic boards
-----BEGIN PGP SIGNATURE-----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=sxXr
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20251219' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- Add u-boot SPL support for GX SoCs
- meson_gx_mmc: reduce maximum frequency
- Add support for EFI capsule updates on all Amlogic boards
This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776
Highlights:
*
SPL / MMC:
o
Fix Kconfig handling for
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
o
Correct raw sector calculations and respect explicit sector values
when loading U-Boot from MMC in SPL
o
Adjust raw MMC loading logic for SoCFPGA platforms
*
EFI boot:
o
Permit EFI booting on SoCFPGA platforms
o
Disable mkeficapsule tool build for Arria 10 where unsupported
*
Agilex5:
o
Upgrade SDHCI controller from SD4HC to SD6HC
o
Enable MMC and Cadence SDHCI support in defconfig
o
Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
o
Revert incorrect GPIO configuration for SDIO_SEL
o
Refine U-Boot DT handling for SD and eMMC boot variants
*
SPI:
o
Allow disabling the DesignWare SPI driver in SPL via Kconfig
*
Board / configuration fixes:
o
Enable random MAC address generation for Cyclone V
o
Fix DE0-Nano-SoC boot configuration
o
Remove obsolete or conflicting options from multiple legacy
SoCFPGA defconfigs
This function and the sector parameter evolved over the time. By now,
sector is influenced by spl_mmc_get_uboot_raw_sector which allows to
adjust the read sector with an offset that U-Boot proper may have inside
the partition. That used to work by chance if both
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR and
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION were enabled. Since
2a00d73d081a they are a choice, and we need to drop the condition to
maintain this feature.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Add SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE as condition where so
far SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION was enough - though often
by chance as both options were enabled.
Reorder the #ifdef blocks at this chance to follow the order in the
Kconfig menu.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
We need to explicitly select SPL_LOAD_BLOCK when USE_PARTITION_TYPE is
enabled, just like the other choices do.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Enforce the max size for U-Boot SPL at the Kconfig level, to prevent the
build system from producing an image too large for the bootROM to load.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251126-spl-gx-v5-9-6cbffb2451ca@postmarketos.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
To support booting Linux from MMC, the file name should be
set up correctly. To support booting Linux from Parallel Flash,
the SPL_LOAD_FIT_ADDRESS should point to the Parallel Flash.
Signed-off-by: Randolph <randolph@andestech.com>
We no longer use raw mode to boot from MMC for our devices in favor
of FAT filesystem.
Maintaining this config for legacy gen5 devices as to not risk breaking
any configurations still utilizing raw mode.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Each include should only be included once.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The null check for loader in boot_from_devices was moved earlier in the
code path by the commit ae409a84e7bff ("spl: NULL check variable before
dereference"), therefore the subsequent null checks for loader are not
necessary.
This patch removes those checks and refactors the prints to be more
useful in case of errors.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Add support for jumping to Linux kernel through OPTEE-OS on ARMv7a to SPL.
This is already supported on ARMv8a, this patch adds the ARMv7a support.
Extend the SPL fitImage loader to record OPTEE-OS load address and in case
the load address is non-zero, use the same bootm-optee.S code used by the
U-Boot fitImage jump code to start OPTEE-OS first and jump to Linux next.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
When spl boot device list has multiple FAT devices, any previousely
registered FAT device should be deregistered before registering
next FAT boot device, otherwise the function may not attempt boot
from next FAT device.One of the situations where this issue can be
observed is when the boot device list has two FAT partitions of a
memory device and if booting fails on first partition (because of
file or partition related errors), boot from next partition actually
gets attempted on previous boot device only, as the previous device
has remained marked as registered. Call the function that invalidates
cached boot device in case of failure in booting from current FAT
boot device.
Signed-off-by: Prasad Kale <prasad.kale@live.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Technically, commit 24bf44cf88e7 ("spl: fit: Do not fail immediately if
an overlay is not available") introduced that regression as the code
will never advance if spl_fit_get_image_name() will return an error. But
at that time, spl_fit_get_image_node() was used in spl_fit_append_fdt()
which calls fdt_subnode_offset() to get the image node. And I presume
the commit was about the latter failing gracefully and trying the next
one.
But with commit b13eaf3bb4e6 ("spl: fit: Add board level function to
decide application of DTO") that behavior changed and the loop in
spl_fit_append_fdt() no longer uses spl_fit_get_image_node() but
spl_fit_get_image_name() directly. Thus it doesn't make any sense to not
break the loop if that fails.
Also, the original use case of commit 24bf44cf88e7 ("spl: fit: Do not
fail immediately if an overlay is not available") is preserved because
spl_subnode_offset() is now called within the loop and errors are
handled gracefully (and advancing the index).
Fixes: b13eaf3bb4e6 ("spl: fit: Add board level function to decide application of DTO")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Introduces support for Device Firmware Upgrade (DFU) over PCIe in
U-Boot. Traditionally, the DFU protocol is used over USB, where a
device enters DFU mode and allows a host to upload firmware or binary
images directly via the USB interface. This is a widely adopted and
convenient method for updating firmware.
In the context of Texas Instruments (TI) SoCs, PCIe can be used as a
boot interface in a manner that differs from the conventional
"PCIe Boot" process, which typically refers to booting an OS or
firmware image from an NVMe SSD or other PCIe-attached storage devices.
Instead, TI SoCs can be configured as a PCIe Endpoint, allowing a
connected PCIe Root Complex (host) to transfer images directly into the
device’s memory over the PCIe bus for boot purposes. This mechanism is
analogous to DFU over USB, but leverages the high-speed PCIe link and
does not depend on traditional storage devices.
By extending the DFU framework in U-Boot to support PCIe, it will be
possible to flash images over PCIe. While this implementation is
motivated by TI SoC use cases, the framework is generic and can be
adopted by everyone for platforms that support PCIe Endpoint mode.
Platforms with hardware support for PCIe-based memory loading can use
this to implement PCIe as a boot mode, as well as to enable flashing
and recovery scenarios similar to DFU over USB.
In summary, enable support for:
- DFU-style flashing of firmware/images over PCIe, analogous to existing
USB DFU workflows
- PCIe as a boot mode where a host can load images directly into device
memory using DFU over PCIe
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20251023080922.3527052-1-h-salunke@ti.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Falcon mode was disabled for TI_SECURE_DEVICE at commit e95b9b4437bc
("ti_armv7_common: Disable Falcon Mode on HS devices") for older 32-bit
HS devices and but can now be enabled with the addition of
OS_BOOT_SECURE.
For secure boot, the kernel with x509 headers can be packaged in a fit
container (fitImage) signed with TIFS keys for authentication.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Using CMD_* configs from spl doesn't make logical sense. Therefore
this patch replaces the checks for CMD_BOOTx with newly added library
symbols LIB_BOOT[IMZ] and SPL_LIB_BOOT[IMZ] which are enabled by their
respective CMD_* or SPL_* counterparts.
On platforms with non-secure falcon mode, SPL_BOOTZ is enabled by
default for 32-bit ARM systems and SPL_BOOTI is enabled by default for
64-bit ARM and RISCV.
The respective C files (image.c/zimage.c) are compiled based on library
symbols $(PHASE_)LIB_BOOTx instead which are in turn selected by both
CMD_BOOTx and SPL_BOOTx as required.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current spl_board_fixups API allows for modification of spl_image
before the SPL jumps to it. This can be used to modify the DT for the
next boot stage, however the current API only allows either the machine
arch or the board to use it.
This limits the utility of the API as there might be certain fixups that
should be applied to all boards sharing the same machine architecture
with others being board specific.
For TI's K3 specifically, this prevents us from performing architecture
level fixups since a lot of TI boards are already making use of the
spl_board_fixups API.
Therefore this patch splits the API into two to allow both board and the
architecture specific fixups. The order is kept as arch then board to
give board specific fixups the precedence.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
When falcon mode is enabled and SPL_OS_BOOT_SECURE is not enabled,
restore the previous default behavior of having an args file be
expected. Platforms which are using a FIT image here and do not need
this can update at their convenience to disable this option now.
Fixes: b1a3ed068869 ("spl: make args file optional in falcon mode")
Signed-off-by: Tom Rini <trini@konsulko.com>
The arg field of `struct spl_image_info` is used by jump_to_image_linux
as the argument for the kernel in falcon mode.
Since commit 601cebc29d2a ("cmd: spl: Remove ATAG support from this
command"), fdt is the only valid argument for kernel in falcon mode.
However fdt was only being set as the argument in nor and xip boot
modes, this patch fixes it for all boot modes and removes the now
redundant code from spl_nor and spl_xip.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
The expected payload for the SPL in secure falcon mode is a fitImage
that contains the kernel image and the DT. This removes the need to load
an additional args file, which exposes an additional attack vector since
it can not be verified.
Therefore this patch disables loading of the arg file when
SPL_OS_BOOT_SECURE is set.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Falcon mode loads a kernel file and an args file which is the
device-tree. However in the case of kernel file being a FIT that
contains the device-tree within it, loading the args file is not
required.
Therefore, this patch introduces a new SPL_OS_BOOT_ARGS config options
that allows us to enable or disable loading of the args file in falcon
mode.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Instead of falling back to the standard U-Boot boot flow, we should just
halt boot if the expected boot flow in falcon mode fails.
This prevents a malicious actor from accessing U-Boot proper if they can
cause a boot failure on falcon mode.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
This patch moves the falcon mode handling logic out of
spl_ubi_load_image to spl_ubi_load_image_os, this allows for cleaner
handling for fallback to U-Boot in case falcon mode fails.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
This patch moves the falcon mode handling logic out of
spl_nor_load_image to spl_nor_load_image_os, this allows for cleaner
handling for fallback to U-Boot in case falcon mode fails.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
This patch moves the falcon mode handling logic out of
spl_spi_load_image to spl_spi_load_image_os, this allows for cleaner
handling for fallback to U-Boot in case falcon mode fails.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
This patch moves the falcon mode handling logic out of
spl_ubi_load_image to spl_ubi_load_image_os, this allows for cleaner
handling for fallback to U-Boot in case falcon mode fails.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Currently the logic to handle falcon mode as well as the regular boot is
inside spl_mmc_do_fs_boot, this prevents us from cleanly extending
falcon mode functionality like toggleable fallback to U-Boot proper.
Therefore this patch splits the logic into spl_mmc_fs_load and
spl_mmc_fs_load_os to handle the regular boot and falcon mode use case.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
This patch adds the new SPL_OS_BOOT_SECURE symbol that enables secure
boot flow in falcon mode. This symbol can be used to disable certain
inherently insecure options during falcon boot.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Due to how we implement the logic for selecting what should/shouldn't be
built in a given phase it becomes extremely cumbersome to make these
phases link when configured by "allyesconfig". As a starting point for
being able to enable "allyesconfig" and expand our static coverage,
disable all other phases in this case.
Future work can be done to enable other phases as time and interest
permit.
Signed-off-by: Tom Rini <trini@konsulko.com>
Today, only a few platforms enable SPL_LOAD_FIT_FULL, and all enable
SPL_LOAD_FIT. As can be seen in usage, the FULL symbol is a superset of
the first symbol, not an alternative. Update Kconfig entries based on
this and simplify the only code which checks for either being set.
Signed-off-by: Tom Rini <trini@konsulko.com>
We can only enable Falcon Mode (aka SPL_OS) on architectures which
implement certain hooks. Express these dependencies in Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
It is possible that we will not have enabled the options to call
spl_sata_load_image_raw so use the __maybe_unused decorator to silence
the compiler warning.
Signed-off-by: Tom Rini <trini@konsulko.com>
In Kconfig syntax, "!=" is a string and not numerical comparison. This
means that to check for a non-zero SPL_SIZE_LIMIT_PROVIDE_STACK value we
need to test that it is "> 0" rather than "!=" 0. This is because "0x0 >
0" is false while "0x0 != 0" is true.
Signed-off-by: Tom Rini <trini@konsulko.com>
Anshul Dalal <anshuld@ti.com> says:
During the implementation of falcon mode for TI's K3 devices [1], I encountered
several limitations in regards to the current falcon mode support in U-Boot
especially in ensuring a secure boot flow.
Although the current implementation allows for loading of a signed fitImage as
the SPL payload, there are still a few edge cases that might allow bypassing the
verified boot path.
The following issues with current falcon mode need to be resolved:
1) No fallback:
We currently fallback to regular boot flow if falcon mode fails,
this might not be secure.
2) No arguments file:
We currently load a kernel file (which could be a raw image or FIT)
alongside an args file (usually the DT). The args file here doesn't have
any verification mechanism, so should be skipped altogether as the FIT can
contain the DT.
3) No access to env:
In ext and fat fs boot, currently we also reads the environment to get the
names of the kernel and the arg file. This should be disabled in secure
falcon flow as the env might not be secure.
4) No raw image boot:
Boot should fail when the kernel file is a raw kernel image, only FIT should
be allowed.
As per the recommendation of maintainers[2], I have decided to split the above
set of tasks into multiple patch series. This is the first one which fixes the
load order of kernel image and the args file in falcon mode. Along with some
minor cleanup.
[1]: https://lore.kernel.org/u-boot/20250603142452.2707171-1-anshuld@ti.com/
[2]: https://lore.kernel.org/u-boot/20250911172313.GT124814@bill-the-cat/
Link: https://lore.kernel.org/r/20250923124639.667718-1-anshuld@ti.com
Minor cleanup of spl_ext and spl_fat files, removing the outdated
CONFIG_SPL_LIBCOMMON_SUPPORT symbols similar to the commit 1847129025e0
("spl: mmc: Drop checks for CONFIG_SPL_LIBCOMMON_SUPPORT") and adding a
few extra failure reports.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Load the kernel image before args in falcon mode to be consistent with
the load order for other boot media.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
