- stm32mp: fix compilation issue with DEBUG_UART

- DT update :
   - Remove buck3 regulator-always-on on AV96
   - Enable btrfs support on DHSOM
   - Drop extra newline from AV96 U-Boot extras DT
   - Add DHCOR based Testbench board
   - Fix and expand PLL configuration comments
   - update SCMI dedicated file
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmNOT2kcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/ppxSEACdyDYNrTNcFp8+Xl3X
 Z9xW+bYWJXoqkyTATAAGZnSc9xpmmLg/3TksXjQ4EUPk38+ffGg/JC0vnEVbBuaO
 UCISp676MktaNAohHudayYzpEvHtzo5ax+7SknMEAOUrCn1m13xYDhDAFWrrhBCv
 zFjDIEG1dSzCf292NevTSXxxcZzy3CSMWjEy9+0zPZu8MNwVIqskDbnNDyI/LYuP
 X+rS1en6oYpGJCqCqzg6ArbC2lD4ApOSTryyFzZsnpB+GG7YRDPxDDeeLu13FtpN
 7wK/fKpzmQXwAsxILJ+4Go1sp57Zm4rDoLPWhbFKUG4xq2r2t7XcDJk3zjcweas/
 0TrL7QN1j+O0zF2Hfc5V5rJiz6hnHph262Q8Lo1+rqyenEyxMUDKIUJmJZBKa8kx
 wcBr8DcOqRayfkNiu4Hxo2jA5Rrh5Ftqi4vDgIwnluvUCmMnxHr46fLf2dIVG0Eg
 QdfbrvAcAwt5cJtqGj4AkZVgA59e4YZlQHrQ4Hva2UNGjHiDMfRwGg8uyo7DWutM
 ZXNoxeYe2BwqUD0UJX4fXEJlfmV8iLjPqN8wzmCAmMM7mcEinq7xdeMx+qFOsU2n
 1nkE9IqE/hb32mrEGQVZdeLghNF2TNM7M9Tjho0Q64xGG7fYnVDBJ7c+znEZ/NUg
 EhHFrlvLfo0IRgWi+BhE8LlthQ==
 =rTKw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20221018' of https://source.denx.de/u-boot/custodians/u-boot-stm

- stm32mp: fix compilation issue with DEBUG_UART
- DT update :
  - Remove buck3 regulator-always-on on AV96
  - Enable btrfs support on DHSOM
  - Drop extra newline from AV96 U-Boot extras DT
  - Add DHCOR based Testbench board
  - Fix and expand PLL configuration comments
  - update SCMI dedicated file

arch/arm/dts/Makefile

@@ -1205,7 +1205,8 @@ dtb-$(CONFIG_STM32MP15x) += \
 	stm32mp15xx-dhcom-pdk2.dtb \
 	stm32mp15xx-dhcom-picoitx.dtb \
 	stm32mp15xx-dhcor-avenger96.dtb \
-	stm32mp15xx-dhcor-drc-compact.dtb
+	stm32mp15xx-dhcor-drc-compact.dtb \
+	stm32mp15xx-dhcor-testbench.dtb
 
 dtb-$(CONFIG_SOC_K3_AM654) += \
 	k3-am654-base-board.dtb \

arch/arm/dts/stm32mp15-scmi.dtsi

@@ -103,7 +103,3 @@
 /delete-node/ &clk_lse;
 /delete-node/ &clk_lsi;
 /delete-node/ &clk_csi;
-/delete-node/ &reg11;
-/delete-node/ &reg18;
-/delete-node/ &usb33;
-/delete-node/ &pwr_regulators;

arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi

@@ -190,6 +190,21 @@
 		CLK_LPTIM45_LSE
 	>;
 
+	/*
+	 * cfg = < DIVM1 DIVN P Q R PQR(p,q,r) >;
+	 * frac = < f >;
+	 *
+	 * PRQ(p,q,r) ... for p,q,r: 0-output disabled / 1-output enabled
+	 * DIVN ... actually multiplier, but RCC_PLL1CFGR1 calls the field DIVN
+	 * m ... for PLL1,2: m=2 ; for PLL3,4: m=1
+	 * XTAL = 24 MHz
+	 *
+	 * VCO = ( XTAL / (DIVM1 + 1) ) * m * ( DIVN + 1 + ( f / 8192 ) )
+	 *   P = VCO / (P + 1)
+	 *   Q = VCO / (Q + 1)
+	 *   R = VCO / (R + 1)
+	 */
+
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
 		compatible = "st,stm32mp1-pll";
@@ -208,7 +223,7 @@
 		u-boot,dm-pre-reloc;
 	};
 
-	/* VCO = 600.0 MHz => P = 50, Q = 50, R = 50 */
+	/* VCO = 600.0 MHz => P = 100, Q = 50, R = 50 */
 	pll4: st,pll@3 {
 		compatible = "st,stm32mp1-pll";
 		reg = <3>;

arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi

@@ -19,7 +19,6 @@
 	};
 };
 
-
 &ethernet0 {
 	phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
 
@@ -102,6 +101,10 @@
 	hnp-srp-disable;
 };
 
+&vdd {
+	/delete-property/ regulator-always-on;
+};
+
 &vdd_io {
 	u-boot,dm-spl;
 };

arch/arm/dts/stm32mp15xx-dhcor-testbench-u-boot.dtsi

@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15xx-dhcor-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		usb0 = &usbotg_hs;
+	};
+
+	config {
+		dh,board-coding-gpios = <&gpiog 13 0>, <&gpiod 9 0>;
+	};
+};
+
+&ethernet0 {
+	phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+
+	mdio0 {
+		ethernet-phy@7 {
+			reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-spl;
+	st,use-ckin;
+	st,cmd-gpios = <&gpiod 2 0>;
+	st,ck-gpios = <&gpioc 12 0>;
+	st,ckin-gpios = <&gpioe 4 0>;
+};
+
+&sdmmc1_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc1_dir_pins_b {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2 {
+	u-boot,dm-spl;
+};
+
+&sdmmc2_b4_pins_a {
+	u-boot,dm-spl;
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc2_d47_pins_c {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_b {
+	u-boot,dm-pre-reloc;
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+	pins2 {
+		u-boot,dm-pre-reloc;
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+};
+
+&usbotg_hs {
+	u-boot,force-b-session-valid;
+	hnp-srp-disable;
+};

arch/arm/dts/stm32mp15xx-dhcor-testbench.dts

@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+
+/ {
+	model = "DH electronics STM32MP15xx DHCOR Testbench";
+	compatible = "dh,stm32mp15xx-dhcor-testbench", "st,stm32mp1xx";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	status = "okay";
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
+&vdd {
+	/delete-property/ regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+};

arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi

@@ -144,6 +144,21 @@
 		CLK_LPTIM45_LSE
 	>;
 
+	/*
+	 * cfg = < DIVM1 DIVN P Q R PQR(p,q,r) >;
+	 * frac = < f >;
+	 *
+	 * PRQ(p,q,r) ... for p,q,r: 0-output disabled / 1-output enabled
+	 * DIVN ... actually multiplier, but RCC_PLL1CFGR1 calls the field DIVN
+	 * m ... for PLL1,2: m=2 ; for PLL3,4: m=1
+	 * XTAL = 24 MHz
+	 *
+	 * VCO = ( XTAL / (DIVM1 + 1) ) * m * ( DIVN + 1 + ( f / 8192 ) )
+	 *   P = VCO / (P + 1)
+	 *   Q = VCO / (Q + 1)
+	 *   R = VCO / (R + 1)
+	 */
+
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
 		compatible = "st,stm32mp1-pll";
@@ -162,7 +177,7 @@
 		u-boot,dm-pre-reloc;
 	};
 
-	/* VCO = 600.0 MHz => P = 99, Q = 74, R = 99 */
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 99 */
 	pll4: st,pll@3 {
 		compatible = "st,stm32mp1-pll";
 		reg = <3>;

arch/arm/mach-stm32mp/Kconfig.15x

@@ -117,7 +117,7 @@ endif
 if DEBUG_UART
 
 config DEBUG_UART_BOARD_INIT
-	default y
+	default y if SPL
 
 # debug on UART4 by default
 config DEBUG_UART_BASE

board/dhelectronics/dh_stm32mp1/board.c

@@ -547,7 +547,7 @@ static int board_get_regulator_buck3_nvm_uv_av96(int *uv)
 	if (!prop || !len)
 		return -ENODEV;
 
-	if (!strstr(prop, "avenger96"))
+	if (!strstr(prop, "avenger96") && !strstr(prop, "dhcor-testbench"))
 		return -EINVAL;
 
 	/* Read out STPMIC1 NVM and determine default Buck3 voltage. */
@@ -564,18 +564,32 @@ static int board_get_regulator_buck3_nvm_uv_av96(int *uv)
 	bucks_vout >>= STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_OFFSET(3);
 	bucks_vout &= STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_MASK;
 
+	if (strstr(prop, "avenger96")) {
 		/*
 		 * Avenger96 board comes in multiple regulator configurations:
-	 * - rev.100 or rev.200 have Buck3 preconfigured to 3V3 operation on
+		 * - rev.100 or rev.200 have Buck3 preconfigured to
-	 *   boot and contains extra Enpirion EP53A8LQI DCDC converter which
+		 *   3V3 operation on boot and contains extra Enpirion
-	 *   supplies the IO. Reduce Buck3 voltage to 2V9 to not waste power.
+		 *   EP53A8LQI DCDC converter which supplies the IO.
-	 * - rev.200L have Buck3 preconfigured to 1V8 operation and have no
+		 *   Reduce Buck3 voltage to 2V9 to not waste power.
-	 *   Enpirion EP53A8LQI DCDC anymore, the IO is supplied from Buck3.
+		 * - rev.200L have Buck3 preconfigured to 1V8 operation
+		 *   and have no Enpirion EP53A8LQI DCDC anymore, the
+		 *   IO is supplied from Buck3.
 		 */
 		if (bucks_vout == STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_3V3)
 			*uv = 2900000;
 		else
 			*uv = 1800000;
+	} else {
+		/* Testbench always respects Buck3 NVM settings */
+		if (bucks_vout == STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_3V3)
+			*uv = 3300000;
+		else if (bucks_vout == STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_3V0)
+			*uv = 3000000;
+		else if (bucks_vout == STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_1V8)
+			*uv = 1800000;
+		else	/* STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_1V2 */
+			*uv = 1200000;
+	}
 
 	return 0;
 }
@@ -595,6 +609,7 @@ static void board_init_regulator_av96(void)
 
 	/* Adjust Buck3 per preconfigured PMIC voltage from NVM. */
 	regulator_set_value(rdev, uv);
+	regulator_set_enable(rdev, true);
 }
 
 static void board_init_regulator(void)

board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its

@@ -18,13 +18,21 @@
 
 		fdt-1 {
 			description = ".dtb";
-			data = /incbin/("arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtb");
+			data = /incbin/("arch/arm/dts/stm32mp15xx-dhcor-testbench.dtb");
 			type = "flat_dt";
 			arch = "arm";
 			compression = "none";
 		};
 
 		fdt-2 {
+			description = ".dtb";
+			data = /incbin/("arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtb");
+			type = "flat_dt";
+			arch = "arm";
+			compression = "none";
+		};
+
+		fdt-3 {
 			description = ".dtb";
 			data = /incbin/("arch/arm/dts/stm32mp15xx-dhcor-drc-compact.dtb");
 			type = "flat_dt";
@@ -38,18 +46,25 @@
 
 		config-1 {
 			/* DT+SoM+board model */
-			description = "arrow,stm32mp15xx-avenger96_somrev0_boardrev1";
+			description = "dh,stm32mp15xx-dhcor-testbench_somrev0_boardrev1";
 			firmware = "uboot";
 			fdt = "fdt-1";
 		};
 
 		config-2 {
 			/* DT+SoM+board model */
-			description = "dh,stm32mp15xx-dhcor-drc-compact_somrev0_boardrev0";
+			description = "arrow,stm32mp15xx-avenger96_somrev0_boardrev1";
 			firmware = "uboot";
 			fdt = "fdt-2";
 		};
 
+		config-3 {
+			/* DT+SoM+board model */
+			description = "dh,stm32mp15xx-dhcor-drc-compact_somrev0_boardrev0";
+			firmware = "uboot";
+			fdt = "fdt-3";
+		};
+
 		/* Add 586-200..586-400 with fdt-2..fdt-4 here */
 	};
 };

board/engicam/stm32mp1/Makefile

@@ -8,3 +8,5 @@ obj-y += spl.o
 else
 obj-y += stm32mp1.o
 endif
+
+obj-$(CONFIG_DEBUG_UART_BOARD_INIT) += ../../st/stm32mp1/debug_uart.o

board/engicam/stm32mp1/spl.c

@@ -6,7 +6,6 @@
  */
 
 #include <common.h>
-#include <asm/io.h>
 
 /* board early initialisation in board_f: need to use global variable */
 static u32 opp_voltage_mv __section(".data");
@@ -22,27 +21,3 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#ifdef CONFIG_DEBUG_UART_BOARD_INIT
-void board_debug_uart_init(void)
-{
-#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)
-
-#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
-#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
-
-	/* UART4 clock enable */
-	setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
-
-#define GPIOG_BASE 0x50008000
-	/* GPIOG clock enable */
-	writel(BIT(6), RCC_MP_AHB4ENSETR);
-	/* GPIO configuration for ST boards: Uart4 TX = G11 */
-	writel(0xffbfffff, GPIOG_BASE + 0x00);
-	writel(0x00006000, GPIOG_BASE + 0x24);
-#else
-
-#error("CONFIG_DEBUG_UART_BASE: not supported value")
-
-#endif
-}
-#endif

board/st/stm32mp1/Makefile

@@ -8,3 +8,5 @@ obj-y += spl.o
 else
 obj-y += stm32mp1.o
 endif
+
+obj-$(CONFIG_DEBUG_UART_BOARD_INIT) += debug_uart.o

board/st/stm32mp1/debug_uart.c

@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#include <config.h>
+#include <debug_uart.h>
+#include <asm/io.h>
+#include <asm/arch/stm32.h>
+#include <linux/bitops.h>
+
+#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
+#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
+
+#define GPIOG_BASE 0x50008000
+
+void board_debug_uart_init(void)
+{
+	if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE) {
+		/* UART4 clock enable */
+		setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
+
+		/* GPIOG clock enable */
+		writel(BIT(6), RCC_MP_AHB4ENSETR);
+		/* GPIO configuration for ST boards: Uart4 TX = G11 */
+		writel(0xffbfffff, GPIOG_BASE + 0x00);
+		writel(0x00006000, GPIOG_BASE + 0x24);
+	}
+}

board/st/stm32mp1/spl.c

@@ -5,11 +5,7 @@
 
 #include <config.h>
 #include <common.h>
-#include <init.h>
-#include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
 #include "../common/stpmic1.h"
 
 /* board early initialisation in board_f: need to use global variable */
@@ -29,27 +25,3 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#ifdef CONFIG_DEBUG_UART_BOARD_INIT
-void board_debug_uart_init(void)
-{
-#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)
-
-#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
-#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
-
-	/* UART4 clock enable */
-	setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
-
-#define GPIOG_BASE 0x50008000
-	/* GPIOG clock enable */
-	writel(BIT(6), RCC_MP_AHB4ENSETR);
-	/* GPIO configuration for ST boards: Uart4 TX = G11 */
-	writel(0xffbfffff, GPIOG_BASE + 0x00);
-	writel(0x00006000, GPIOG_BASE + 0x24);
-#else
-
-#error("CONFIG_DEBUG_UART_BASE: not supported value")
-
-#endif
-}
-#endif

configs/stm32mp15_dhcom_basic_defconfig

@@ -79,6 +79,7 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_BTRFS=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=nor0"

configs/stm32mp15_dhcor_basic_defconfig

@@ -77,6 +77,7 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_BTRFS=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=nor0"