talos/website/content/v1.6/advanced/migrating-from-kubeadm.md

title, description, aliases

title	description	aliases
Migrating from Kubeadm	Migrating Kubeadm-based clusters to Talos.	../guides/migrating-from-kubeadm

It is possible to migrate Talos from a cluster that is created using kubeadm to Talos.

High-level steps are the following:

1. Collect CA certificates and a bootstrap token from a control plane node.
2. Create a Talos machine config with the CA certificates with the ones you collected.
3. Update control plane endpoint in the machine config to point to the existing control plane (i.e. your load balancer address).
4. Boot a new Talos machine and apply the machine config.
5. Verify that the new control plane node is ready.
6. Remove one of the old control plane nodes.
7. Repeat the same steps for all control plane nodes.
8. Verify that all control plane nodes are ready.
9. Repeat the same steps for all worker nodes, using the machine config generated for the workers.

Remarks on kube-apiserver load balancer

While migrating to Talos, you need to make sure that your kube-apiserver load balancer is in place and keeps pointing to the correct set of control plane nodes.

This process depends on your load balancer setup.

If you are using an LB that is external to the control plane nodes (e.g. cloud provider LB, F5 BIG-IP, etc.), you need to make sure that you update the backend IPs of the load balancer to point to the control plane nodes as you add Talos nodes and remove kubeadm-based ones.

If your load balancing is done on the control plane nodes (e.g. keepalived + haproxy on the control plane nodes), you can do the following:

1. Add Talos nodes and remove kubeadm-based ones while updating the haproxy backends to point to the newly added nodes except the last kubeadm-based control plane node.
2. Turn off keepalived to drop the virtual IP used by the kubeadm-based nodes (introduces kube-apiserver downtime).
3. Set up a virtual-IP based new load balancer on the new set of Talos control plane nodes. Use the previous LB IP as the LB virtual IP.
4. Verify apiserver connectivity over the Talos-managed virtual IP.
5. Migrate the last control-plane node.

Prerequisites

• Admin access to the kubeadm-based cluster
• Access to the /etc/kubernetes/pki directory (e.g. SSH & root permissions) on the control plane nodes of the kubeadm-based cluster
• Access to kube-apiserver load-balancer configuration

Step-by-step guide

1. Download /etc/kubernetes/pki directory from a control plane node of the kubeadm-based cluster.

2. Create a new join token for the new control plane nodes:

   # inside a control plane node
   kubeadm token create --ttl 0
   

3. Create Talos secrets from the PKI directory you downloaded on step 1 and the token you generated on step 2:

   talosctl gen secrets --kubernetes-bootstrap-token <TOKEN> --from-kubernetes-pki <PKI_DIR>
   

4. Create a new Talos config from the secrets:

   talosctl gen config --with-secrets secrets.yaml <CLUSTER_NAME> https://<EXISTING_CLUSTER_LB_IP>
   

5. Collect the information about the kubeadm-based cluster from the kubeadm configmap:

   kubectl get configmap -n kube-system kubeadm-config -oyaml
   

   Take note of the following information in the ClusterConfiguration:

   • .controlPlaneEndpoint
   • .networking.dnsDomain
   • .networking.podSubnet
   • .networking.serviceSubnet

6. Replace the following information in the generated controlplane.yaml:

   • .cluster.network.cni.name with none
   • .cluster.network.podSubnets[0] with the value of the networking.podSubnet from the previous step
   • .cluster.network.serviceSubnets[0] with the value of the networking.serviceSubnet from the previous step
   • .cluster.network.dnsDomain with the value of the networking.dnsDomain from the previous step

7. Go through the rest of controlplane.yaml and worker.yaml to customize them according to your needs, especially :

   • .cluster.secretboxEncryptionSecret should be either removed if you don't currently use EncryptionConfig on your kube-apiserver or set to the correct value

8. Make sure that, on your current Kubeadm cluster, the first --service-account-issuer= parameter in /etc/kubernetes/manifests/kube-apiserver.yaml is equal to the value of .cluster.controlPlane.endpoint in controlplane.yaml. If it's not, add a new --service-account-issuer= parameter with the correct value before your current one in /etc/kubernetes/manifests/kube-apiserver.yaml on all of your control planes nodes, and restart the kube-apiserver containers.

9. Bring up a Talos node to be the initial Talos control plane node.

10. Apply the generated controlplane.yaml to the Talos control plane node:

    talosctl --nodes <TALOS_NODE_IP> apply-config --insecure --file controlplane.yaml
    

11. Wait until the new control plane node joins the cluster and is ready.

    kubectl get node -owide --watch
    

12. Update your load balancer to point to the new control plane node.

13. Drain the old control plane node you are replacing:

    kubectl drain <OLD_NODE> --delete-emptydir-data --force --ignore-daemonsets --timeout=10m
    

14. Remove the old control plane node from the cluster:

    kubectl delete node <OLD_NODE>
    

15. Destroy the old node:

    # inside the node
    sudo kubeadm reset --force
    

16. Repeat the same steps, starting from step 7, for all control plane nodes.

17. Repeat the same steps, starting from step 7, for all worker nodes while applying the worker.yaml instead and skipping the LB step:

    talosctl --nodes <TALOS_NODE_IP> apply-config --insecure --file worker.yaml
    

18. Your kubeadm kube-proxy configuration may not be compatible with the one generated by Talos, which will make the Talos Kubernetes upgrades impossible (labels may not be the same, and selector.matchLabels is an immutable field). To be sure, export your current kube-proxy daemonset manifest, check the labels, they have to be:

    tier: node
    k8s-app: kube-proxy
    

    If the are not, modify all the labels fields, save the file, delete your current kube-proxy daemonset, and apply the one you modified.