Implement a MUX method to parse MAX_STREAM_DATA. If the limit is greater
than the previous one and the stream was blocked, the flag
QC_SF_BLK_SFCTL is removed.
This commit is similar to the previous one, but this time on the
connection level instead of the stream.
When the connection limit is reached, the connection is flagged with
QC_CF_BLK_MFCTL. This flag is checked in qc_send.
qcs_push_frame uses a new parameter which is used to not exceed the
connection flow-limit while calling it repeatdly over multiple streams
instance before transfering data to the transport layer.
Implement the flow-control max-streams-data limit on emission. We ensure
that we never push more than the offset limit set by the peer. When the
limit is reached, the stream is marked as blocked with a new flag
QC_SF_BLK_SFCTL to disable emission.
Currently, this is only implemented for bidirectional streams. It's
required to unify the sending for unidirectional streams via
qcs_push_frame from the H3 layer to respect the flow-control limit for
them.
Rename the fields used for flow-control in the qcc structure. The
objective is to have shorter name for better readability while keeping
their purpose clear. It will be useful when the flow-control will be
extended with new fields.
In MQTTv3.1, protocol name is "MQIsdp" and protocol level is 3. The mqtt
converters(mqtt_is_valid and mqtt_field_value) did not work for clients on
mqttv3.1 because the mqtt_parse_connect() marked the CONNECT message invalid
if either the protocol name is not "MQTT" or the protocol version is other than
v3.1.1 or v5.0. To fix it, we have added the mqttv3.1 protocol name and version
as part of the checks.
This patch fixes the mqtt converters to support mqttv3.1 clients as well (issue #1600).
It must be backported to 2.4.
During the packet number space discarding, do no reset tx.in_flight counter
before decrement it from other variables.
Furthermore path prep_in_flight counter was not decremented.
We must consider the peer address as validated as soon as we received an
handshake packet. An ACK frame in handshake packet was too restrictive.
Rename the concerned flag to reflect this situation.
The most important one is the ->flags member which leads to an erratic xprt behavior.
For instance a non ack-eliciting packet could be seen as ack-eliciting leading the
xprt to try to retransmit a packet which are not ack-eliciting. In this case, the
xprt does nothing and remains indefinitively in a blocking state.
The TX packet refcounting had come with the multithreading support but not only.
It is very useful to ease the management of the memory allocated for TX packets
with TX frames attached to. At some locations of the code we have to move TX
frames from a packet to a new one during retranmission when the packet has been
deemed as lost or not. When deemed lost the memory allocated for the paquet must
be released contrary to when its frames are retransmitted when probing (PTO).
For now on, thanks to this patch we handle the TX packets memory this way. We
increment the packet refcount when:
- we insert it in its packet number space tree,
- we attache an ack-eliciting frame to it.
And reciprocally we decrement this refcount when:
- we remove an ack-eliciting frame from the packet,
- we delete the packet from its packet number space tree.
Note that an optimization WOULD NOT be to fully reuse (without releasing its
memorya TX packet to retransmit its contents (its ack-eliciting frames). Its
information (timestamp, in flight length) to be processed by packet loss detection
and the congestion control.
When building a packet with an ACK frame, we store the largest acknowledged
packet number sent in this frame in the packet (quic_tx_packet struc).
When receiving an ack for such a packet we can purge the tree of acknowledged
packet number ranges from the range sent before this largest acknowledged
packet number.
This struct member stores the largest acked packet number which was received. It
is used to build (TX) packet. But this is confusing to store it in the tx packet
of the packet number space structure even if it is used to build and transmit
packets.
There was free_act_rules() that frees all rules from a head but nothing
to free a single rule. Currently some rulesets partially free their own
rules on parsing error, and we're seeing some regtests emit errors under
ASAN because of this.
Let's first extract the code to free a rule into its own function so
that it becomes possible to use it on a single rule.
Log servers are a real mess because:
- entries are duplicated using memcpy() without their strings being
reallocated, which results in these ones not being freeable every
time.
- a new field, ring_name, was added in 2.2 by commit 99c453df9
("MEDIUM: ring: new section ring to declare custom ring buffers.")
but it's never initialized during copies, causing the same issue
- no attempt is made at freeing all that.
Of course, running "haproxy -c" under ASAN quickly notices that and
dumps a core.
This patch adds the missing strdup() and initialization where required,
adds a new free_logsrv() function to cleanly free() such a structure,
calls it from the proxy when iterating over logsrvs instead of silently
leaking their file names and ring names, and adds the same logsrv loop
to the proxy_free_defaults() function so that we don't leak defaults
sections on exit.
It looks a bit entangled, but it comes as a whole because all this stuff
is inter-dependent and was missing.
It's probably preferable not to backport this in the foreseable future
as it may reveal other jokes if some obscure parts continue to memcpy()
the logsrv struct.
The BUG_ON_HOT() test condition added to b_peek_varint() by commit
8873b85bd ("DEBUG: buf: add BUG_ON_HOT() to most buffer management
functions") was wrong as <data> in this function is not b->data,
so that was triggering during live dumps of H2 traces on the CLI
when built with -DDEBUG_STRICT=2. No backport is needed.
The current implementation of STREAM frames emission has some
limitation. Most notably when we cannot sent all frames in a single
qc_send run.
In this case, frames are left in front of the MUX list. It will be
re-send individually before other frames, possibly another frame from
the same STREAM with new data. An opportunity to merge the frames is
lost here.
This method is now improved. If a frame cannot be send entirely, it is
discarded. On the next qc_send run, we retry to send to this position. A
new field qcs.sent_offset is used to remember this. A new frame list is
used for each qc_send.
The impact of this change is not precisely known. The most notable point
is that it is a more logical method of emission. It might also improve
performance as we do not keep old STREAM frames which might delay other
streams.
Implement a new MUX function qcc_notify_send. This function must be
called by the transport layer to confirm the sending of STREAM data to
the MUX.
For the moment, the function has no real purpose. However, it will be
useful to solve limitations on push frame and implement the flow
control.
The aim of the idle timeout is to silently closed the connection after a period
of inactivity depending on the "max_idle_timeout" transport parameters advertised
by the endpoints. We add a new task to implement this timer. Its expiry is
updated each time we received an ack-eliciting packet, and each time we send
an ack-eliciting packet if no other such packet was sent since we received
the last ack-eliciting packet. Such conditions may be implemented thanks
to QUIC_FL_CONN_IDLE_TIMER_RESTARTED_AFTER_READ new flag.
This packet number space flags were defined with the same value because
defined at different places in the file. Assemble them at the same location
with different values.
This bug could unvalidate the peer address after it was validated
during the handshake leading to the anti-amplication limit to be
enabled again after having been disabled. The situation could not
be unblocked (deadlock).
There is no need to use such a reference counter anymore since the QUIC
connections are always handled by the same thread.
quic_conn_drop() is removed. Its code is merged into quic_conn_release().
When we store the remote transport parameters, we compute the maximum idle
timeout for the connection which is the minimum of the two advertised
max_idle_timeout transport parameter values if both have non-null values, or the
maximum if one of the value is set and non-null.
When a tcp-{request,response} content or http-request/http-response
rule delivers a final verdict (deny, accept, redirect etc), the last
evaluated one will now be recorded in the stream. The purpose is to
permit to log the last one that performed a final action. For now
the log is not produced.
The server_id_hdr_name is already processed as an ist in various locations lets
also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The orgto_hdr_name is already processed as an ist in `http_process_request`,
lets also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The fwdfor_hdr_name is already processed as an ist in `http_process_request`,
lets also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The monitor_uri is already processed as an ist in `http_wait_for_request`, lets
also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
Supporting kFreebsd previously led to FreeBSD (< 14) build breakage:
In file included from src/cpuset.c:5:
In file included from include/haproxy/cpuset.h:4:
include/haproxy/cpuset-t.h:46:2: error: unknown type name 'cpu_set_t'; did you mean 'cpuset_t'?
CPUSET_REPR cpuset;
^~~~~~~~~~~
cpuset_t
include/haproxy/cpuset-t.h:21:22: note: expanded from macro 'CPUSET_REPR'
# define CPUSET_REPR cpu_set_t
^
Around limits for QUIC integer encoding, this functions could return
wrong values which lead to qc_build_frms() to prepare wrong CRYPTO (less chances)
or STREAM frames (more chances). qc_do_build_pkt() could build wrong packets
with bad CRYPTO/STREAM frames which could not be decoded by the peer.
In such a case ngtcp2 closes the connection with an ENCRYPTION_ERROR error
in a transport CONNECTION_CLOSE frame.
This function returns the maximum integer which may be encoded with a number of
bytes passed as parameter. Useful to precisely compute the number of bytes which
may used to fulfill a buffer with lengths as QUIC enteger encoded prefixes for the
number of following bytes.
When in congestion avoidance state and when acknowledging an <acked> number bytes
we must increase the congestion window by at most one datagram (<path->mtu>)
by congestion window. So thanks to this patch we apply a ratio to the current
number of acked bytes : <acked> * <path->mtu> / <cwnd>.
So, when <cwnd> bytes are acked we precisely increment <cwnd> by <path->mtu>.
Furthermore we take into an account the number of remaining acknowledged bytes
each time we increment the window by <acked> storing their values in the algorithm
struct state (->remain_acked) so that it might be take into an account at the
next ACK event.
This function returns the remaining number of bytes which can be sent on the
network before fulfilling the congestion window. There is a counter for
the number of prepared data and another one for the really in flight number
of bytes (in_flight). These variable have been mixed up.
Since the persistent congestion detection is done out of the congestion
controllers, there is no need to pass them information through quic_cc_event struct.
We remove its useless members. Also remove qc_cc_loss_event() which is no more used.
We establish the persistent congestion out of any congestion controller
to improve the algorithms genericity. This path characteristic detection may
be implemented regarless of the underlying congestion control algorithm.
Send congestion (loss) event using directly quic_cc_event(), so without
qc_cc_loss_event() wrapper function around quic_cc_event().
Take the opportunity of this patch to shorten "newest_time_sent" member field
of quic_cc_event to "time_sent".
We want to be able to make the congestion controllers re-enter the slow
start state outside of the congestion controllers themselves. So,
we add a callback ->slow_start() to do so.
Define this callback for NewReno algorithm.
kFreeBSD needs to be treated as a distinct target from FreeBSD
since the underlying system libc is the GNU one. Thus, relying
only on __GLIBC__ no longer suffice.
- freebsd-glibc new target, key difference is including crypt.h
and linking to libdl like linux.
- cpu affinity available but the api is still the FreeBSD's.
- enabling auxiliary data access only for Linux.
Patch based on preliminary work done by @bigon.
closes#1555
Implement the locally flow-control streams limit for opened
bidirectional streams. Add a counter which is used to count the total
number of closed streams. If this number is big enough, emit a
MAX_STREAMS frame to increase the limit of remotely opened bidirectional
streams.
This is the first commit to implement QUIC flow-control. A series of
patches should follow to complete this.
This is required to be able to handle more than 100 client requests.
This should help to validate the Multiplexing interop test.
Modify the STREAM emission in qc_send. Use the new transport function
qc_send_app_pkts to directly send the list of constructed frames. This
allows to remove the tasklet wakeup on the quic_conn and should reduce
the latency.
If not all frames are send after the transport call, subscribe the MUX
on the lower layer to be able to retry. Currently there is a bug because
the transport layer does not retry to send frames in excess after a
successful sendto. This might cause the transfer to be interrupted.
Define two new unions in the qcc structure named 'lfctl' and 'rfctl'.
For the moment they are empty. They will be completed to store the
initial and current level for flow-control on the local and remote side.
Improve the functions used to detect the stream characteristics :
uni/bidirectional and local/remote initiated.
Most notably, these functions are now designed to work transparently for
a MUX in the frontend or backend side. For this, we use the connection
to determine the current MUX side. This will be useful if QUIC is
implemented on the server side.
Since QUIC accept handling has been improved, the MUX is initialized
after the handshake completion. Thus its safe to access transport
parameters in qc_init via the quic_conn.
Remove quic_mux_transport_params_update which was called by the
transport for the MUX. This improves the architecture by removing a
direct call from the transport to the MUX.
The deleted function body is not transfered to qc_init because this part
will change heavily in the near future when implementing the
flow-control.
As reported by Tim in issue #1428, our sources are clean, there are
just a few files with a few rare non-ASCII chars for the paragraph
symbol, a few typos, or in Fred's name. Given that Fred already uses
the non-accentuated form at other places like on the public list,
let's uniformize all this and make sure the code displays equally
everywhere.
This is the pool equivalent of commit 97ea9c49f ("BUG/MEDIUM: fd: always
align fdtab[] to 64 bytes"). After a careful code review, it happens that
the pool heads are the other structures allocated with malloc/calloc that
claim to be aligned to a size larger than what the allocator can offer.
While no issue was reported on them, no memset() is performed and no type
is large, this is a problem waiting to happen, so better fix it. In
addition, it's relatively easy to do by storing the allocation address
inside the pool_head itself and use it at free() time. Finally, threads
might benefit from the fact that the caches will really be aligned and
that there will be no false sharing.
This should be backported to all versions where it applies easily.
Many inline functions involve some BUG_ON() calls and because of the
partial complexity of the functions, they're not inlined anymore (e.g.
co_data()). The reason is that the expression instantiates the message,
its size, sometimes a counter, then the atomic OR to taint the process,
and the back trace. That can be a lot for an inline function and most
of it is always the same.
This commit modifies this by delegating the common parts to a dedicated
function "complain()" that takes care of updating the counter if needed,
writing the message and measuring its length, and tainting the process.
This way the caller only has to check a condition, pass a pointer to the
preset message, and the info about the type (bug or warn) for the tainting,
then decide whether to dump or crash. Note that this part could also be
moved to the function but resulted in complain() always being at the top
of the stack, which didn't seem like an improvement.
Thanks to these changes, the BUG_ON() calls do not result in uninlining
functions anymore and the overall code size was reduced by 60 to 120 kB
depending on the build options.
This one is referenced in initcalls by its pointer, it makes no sense
to declare it inline. At best it causes function duplication, at worst
it doesn't build on older compilers.
This one is referenced in initcalls by its pointer, it makes no sense
to declare it inline. At best it causes function duplication, at worst
it doesn't build on older compilers.
The 3 functions http_{req,res,after_res}_keywords_register() are
referenced in initcalls by their pointer, it makes no sense to declare
them inline. At best it causes function duplication, at worst it doesn't
build on older compilers.
This one is referenced in initcalls by its pointer, it makes no sense
to declare it inline. At best it causes function duplication, at worst
it doesn't build on older compilers.
gcc 6 continues its saga with excessive reports of null-deref warnings.
This time it was in the IS_HTX_CS() macro. Let's use __cs_conn() after
cs_conn() was checked.
Do not distinguish the direction (TX/RX) when settings TLS secrets flags.
There is not such a distinction in the RFC 9001.
Assemble them at the same level: at the upper context level.
Wakeup asap the timer task when setting its timer in the past.
Take also the opportunity of this patch to make simplify quic_pto_pktns():
calling tick_first() is useless here to compare <lpto> with <tmp_pto>.
We had several warnings when building haproxy 2.5.4 with
old openssl 1.0.1e. This version of openssl is the latest
available in EOL centos 6.
include/haproxy/openssl-compat.h:157:51: \
warning: "LIBRESSL_VERSION_NUMBER" is not defined
This patch fixed the build. It changes the #if condition,
as done in other similar parts of openssl-compat.h.
Reorganize the Rx path for STREAM frames on bidirectional streams. A new
function qcc_recv is implemented on the MUX. It will handle the STREAM
frames copy and offset calculation from transport to MUX.
Another function named qcc_decode_qcs from the MUX can be called by
transport each time new STREAM data has been copied.
The architecture is now cleaner with the MUX layer in charge of parsing
the STREAM frames offsets. This is required to be able to implement the
flow-control on the MUX layer.
Note that as a convenience, a STREAM frame is not partially copied to
the MUX buffer. This simplify the implementation for the moment but it
may change in the future to optimize the STREAM frames handling.
For the moment, only bidirectional streams benefit from this change. In
the future, it may be extended to unidirectional streams to unify the
STREAM frames processing.
FIN flag on a STREAM frame was not detected if the frame was previously
buffered on qcs.rx.frms before being handled.
To fix this, copy the fin field from the quic_stream instance to
quic_rx_strm_frm. This is required to properly notify the FIN flag on
qc_treat_rx_strm_frms for the MUX layer.
Without this fix, the request channel might be left opened after the
last STREAM frame reception if there is out-of-order frames on the Rx
path.
This flag is set when the STREAM frame with FIN set has been received on
a qcs instance. For now, this is only used as a BUG_ON guard to prevent
against multiple frames with FIN set. It will also be useful when
reorganize the RX path and move some of its code in the mux.
The new macro was introduced with commit 86bcc5308 ("DEBUG: implement 4
levels of choices between warn and crash.") but some older compilers can
complain that we test the value when the macro is not defined despite
having already been checked in a previous #if directive. Let's just
repeat the test for the definition.
693b23bb1 ("MEDIUM: tree-wide: Use unsafe conn-stream API when it is
relevant") introduced a regression in DEBUG_STRICT mode because some BUG_ON
conditions were inverted. It should ok now.
In addition, ALREADY_CHECKED macro was removed from appctx_wakeup() function
because it is useless now.
This way si_*_recv() and si_*_sned() API are defined the same
way. si_sync_snd/si_sync_recv are both exported and defined in the C
file. And si_cs_send/si_cs_recv are private and only used by
stream-interface internals.
The unsafe conn-stream API (__cs_*) is now used when we are sure the good
endpoint or application is attached to the conn-stream. This avoids compiler
warnings about possible null derefs. It also simplify the code and clear up
any ambiguity about manipulated entities.
Depending on the context, we know the endpoint or the application attached
to the conn_stream is defined and we know its type. However, having
accessors testing the endpoint or the application may lead the compiler to
report possible null derefs here and there. The alternative is to add
useless tests or use ALREAD_CHECKED/DISGUISE macros. It is tedious and
inelegant.
So now, similarily to the ob API, the safe API, testing
endpoint/application, relies on an unsafe one (same name prefixed with
'__'). This way, any caller may use the unsafe API when it is relevant.
In addition, there is no reason to test the conn-stream itself. It is the
caller responsibility to be sure there is a conn-stream to get its endpoint
or its application. And most of type, we are sure to have a conn-stream.
A few functions such as c_adv(), c_rew(), co_set_data() or co_skip() got a
BUG_ON_HOT() to make sure they're not used to push more data than available
in the buffer. Note that with HTX the margin can be high and will less easily
trigger, but the goal is to detect a misuse early enough.
co_data() should never be called with a wrong c->output. At least it never
happens in regtests, but we're adding a CHECK_IF_HOT() there to avoid crashing
but report it if it ever happened when the hot path checks are enabled.
The use of co_set_data() should be strictly limited to setting the amount
of existing data to be transmitted. It ought not be used to decrement the
output after the data have left the buffer, because doing so involves
performing incorrect calculations using co_data() that still comprises
data that are not in the buffer anymore. Let's use c_rew() for this, which
is made exactly for this purpose, i.e. decrement c->output by as much as
requested. This is cleaner, faster, and will permit stricter checks.
A number of tests are now performed in low-level buffer management
functions to verify that we're not appending data to a full buffer
for example, or that the buffer passed in argument is consistent in
that its data don't outweigh its size. The few functions that already
involve memcpy() or memmove() instead got a BUG_ON() that will always
be enabled, since the overhead remains minimalist.
The buffer ring management functions br_* were all stuffed with BUG_ON()
statements that never triggered and that are on some fast paths (e.g. in
mux_h2). Let's turn them to BUG_ON_HOT() instead.
Two new BUG_ON variants, BUG_ON_HOT() and CHECK_IF_HOT() are introduced
to debug hot paths (such as low-level API functions). These ones must
not be enabled by default as they would significantly affect performance
but they may be enabled by setting DEBUG_STRICT to a value above 1. In
this case, DEBUG_STRICT_ACTION is mostly respected with a small change,
which is that the no_crash variant of BUG_ON() isn't turned to a regular
warning but to a one-time warning so as not to spam with warnings in a
hot path. It is for this reason that there is no WARN_ON_HOT().
We used to have DEBUG_STRICT_NOCRASH to disable crashes on BUG_ON().
Now we have other levels (WARN_ON(), CHECK_IF()) so we need something
finer-grained.
This patch introduces DEBUG_STRICT_ACTION which takes an integer value.
0 disables crashes and is the equivalent of DEBUG_STRICT_NOCRASH. 1 is
the default and only enables crashes on BUG_ON(). 2 also enables crashes
on WARN_ON(), and 3 also enables warnings on CHECK_IF(), and is suited
to developers and CI.
Now we'll explicitly mention if the test was a bug/warn/check, and
"FATAL" is only displayed when the process crashes. The non-crashing
BUG_ON() also suggests to report to developers.
The only reason for warning once is to check if a condition really
happens. Let's use a term that better translates the intent, that's
important when reading the code.
Simplify the data manipulation of STREAM frames on TX. Only stream data
and len field are used to generate a valid STREAM frames from the
buffer. Do not use the offset field, which required that a single buffer
instance should be shared for every frames on a single stream.
This one will maintain a static counter per call place and will only
emit the warning on the first call. It may be used to invite users to
report an unexpected event without spamming them with messages.
This is the same as BUG_ON() except that it never crashes and only emits
a warning and a backtrace, inviting users to report the problem. This will
be usable for non-fatal issues that should not happen and need to be fixed.
This way the BUG_ON() when using DEBUG_STRICT_NOCRASH is effectively an
equivalent of WARN_ON().
The purpose is to make the program die at this point, so let's help the
compiler optimise the code (especially in sensitive areas) by telling it
that ABORT_NOW() does not return. This reduces the overall code size by
~0.5%.
The BUG_ON() macro handling is complicated because it relies on a
conditional CRASH_NOW() macro whose definition depends on DEBUG_STRICT
and DEBUG_STRICT_NOCRASH. Let's rethink the whole thing differently,
and instead make the underlying _BUG_ON() macro take a crash argument
to decide whether to crash or not, as well as a prefix and a suffix for
the message, that will allow to distinguish between variants. Now the
suffix is set to a message explaining we don't crash when needed.
This also allows to get rid of the CRASH_NOW() macro and to define
much simpler new macros.
The functions needed to manipulate the "tainted" flags were located in
too high a level to be callable from the lower code layers. Let's move
them to bug.h.
Since recent changes related to the conn-stream/stream-interface
refactoring, GCC reports potential null pointer dereferences when we get the
appctx, the stream or the stream-interface from the conn-strem. Of course,
depending on the time, these entities may be null. But at many places, we
know they are defined and it is safe to get them without any check. Thus, we
use ALREADY_CHECKED() macro to silent these warnings.
Note that the refactoring is unfinished, so it is not a real issue for now.
cs_detach_app() function is added to detach an app from a conn-stream. And
now, both cs_detach_app() and cs_detach_endp() release the conn-stream when
both the app and the endpoint are detached.
Thanks to all previous changes, it is now possible to move the
stream-interface into the conn-stream. To do so, some SI functions are
removed and their conn-stream counterparts are added. In addition, the
conn-stream is now responsible to create and release the
stream-interface. While the stream-interfaces were inlined in the stream
structure, there is now a pointer in the conn-stream. stream-interfaces are
now dynamically allocated. Thus a dedicated pool is added. It is a temporary
change because, at the end, the stream-interface structure will most
probably disappear.
Because cs_detach() is releated to the endpoint only, the function is
renamed. The main purpose of this patch is to be able to add a function to
detach the conn-stream from the application.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the stream part.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the stream-interface part.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
In the same way the conn-stream has a pointer to the stream endpoint , this
patch adds a pointer to the application entity in the conn-stream
structure. For now, it is a stream or a health-check. It is mandatory to
merge the stream-interface with the conn-stream.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
To be able to handle applets as a conn-stream endpoint, we must be prepared
to handle different types of endpoints. First of all, the conn-strream's
connection must no longer be used directly.
The backend conn-stream is no longer released on connection retry. This
means the conn-stream is detached from the underlying connection but not
released. Thus, during connection retries, the stream has always an
allocated conn-stream with no connection. All previous changes were made to
make this possible.
Note that .attach() mux callback function was changed to get the conn-stream
as argument. The muxes are no longer responsible to create the conn-stream
when a server connection is attached to a stream.
si_attach_conn() function should be used to attach a connection to a
stream-interface. It created a conn-stream if necessary. This function is
mandatory to be able to keep the backend conn-stream during connection
retries.
si_reset_endpoint() function may be used to reset the SI's endpoint without
releasing the conn-stream if the endpoint is a connection. If the endpoint
is an appctx, it is released. This change is mandatory to merge the SI and
the CS and keep the backend conn-stream attached to the stream during
connection retries.
cs_detach() function is added to detach a conn-stream from the underlying
connection. This part will evovle to handle applets too. Concretely,
cs_destroy() is split to detach the conn-stream from its endpoint, via
cs_detach(), and then, the conn-stream is released, via cs_free().
The conn-stream will progressively replace the stream-interface. Thus, a
stream will have to allocate the backend conn-stream during its
creation. This means it will be possible to have a conn-stream with no
connection. To prepare this change, we test the conn-stream's connection
when we retrieve it.
Stream-interfaces will be moved in the conn-stream and the appctx will be
moved at the same level than the muxes. Idea is to merge the
stream-interface and the conn-stream and have a better symmetry between the
muxes and the applets. To limit bugs during this refactoring, when the SI
endpoint is released, the appctx case is handled first.
New function pool_parse_debugging() is now dedicated to parsing options
of -dM. For now it only handles the optional memory poisonning byte, but
the function may already return an informative message to be printed for
help, a warning or an error. This way we'll reuse it for the settings
that will be needed for configurable debugging options.
The STG_REGISTER init level is used to register known keywords and
protocol stacks. It must be called earlier because some of the init
code already relies on it to be known. For example, "haproxy -vv"
for now is constrained to start very late only because of this.
This patch moves it between STG_LOCK and STG_ALLOC, which is fine as
it's used for static registration.
Now -dM will set POOL_DBG_POISON for consistency with the rest of the
pool debugging options. As such now we only check for the new flag,
which allows the default value to be preset.
This option used to allow to store a marker at the end of the area, which
was used as a canary and detection against wrong freeing while the object
is used, and as a pointer to the last pool_free() caller when back in cache.
Now that we can compute the offsets at runtime, let's check it at run time
and continue the code simplification.
This option used to allow to store a pointer to the caller of the last
pool_alloc() or pool_free() at the end of the area. Now that we can
compute the offsets at runtime, let's check it at run time and continue
the code simplification. In __pool_alloc() we now always calculate the
return address (which is quite cheap), and the POOL_DEBUG_TRACE_CALLER()
calls are conditionned on the status of debugging option.
This macro is build-time dependent and is almost unused, yet where it
cannot easily be avoided. Now that we store the distinction between
pool->size and pool->alloc_sz, we don't need to maintain it and we
can instead compute it on the fly when creating a pool. This is what
this patch does. The variables are for now pretty static, but this is
sufficient to kill the macro and will allow to set them more dynamically.
The allocated size is the visible size plus the extra storage. Since
for now we can store up to two extra elements (mark and tracer), it's
convenient because now we know that the mark is always stored at
->size, and the tracer is always before ->alloc_sz.
Like previous patches, this replaces the build-time code paths that were
conditionned by CONFIG_HAP_POOLS with runtime paths conditionned by
!POOL_DBG_NO_CACHE. One trivial test had to be added in the hot path in
__pool_alloc() to refrain from calling pool_get_from_cache(), and another
one in __pool_free() to avoid calling pool_put_to_cache().
All cache-specific functions were instrumented with a BUG_ON() to make
sure we never call them with cache disabled. Additionally the cache[]
array was not initialized (remains NULL) so that we can later drop it
if not needed. It's particularly huge and should be turned to dynamic
with a pointer to a per-thread area where all the objects are located.
This will solve the memory usage issue and will improve locality, or
even help better deal with NUMA machines once each thread uses its own
arena.
There were very few functions left that were specific to global pools,
and even the checks they used to participate to are not directly on the
most critical path so they can suffer an extra "if".
What's done now is that pool_releasable() always returns 0 when global
pools are disabled (like the one before) so that pool_evict_last_items()
never tries to place evicted objects there. As such there will never be
any object in the free list. However pool_refill_local_from_shared() is
bypassed when global pools are disabled so that we even avoid the atomic
loads from this function.
The default global setting is still adjusted based on the original
CONFIG_NO_GLOBAL_POOLS that is set depending on threads and the allocator.
The global executable only grew by 1.1kB by keeping this code enabled,
and the code is simplified and will later support runtime options.
The test to decide whether or not to enforce integrity checks on cached
objects is now enabled at runtime and conditionned by this new debugging
flag. While previously it was not a concern to inflate the code size by
keeping the two functions static, they were moved to pool.c to limit the
impact. In pool_get_from_cache(), the fast code path remains fast by
having both flags tested at once to open a slower branch when either
POOL_DBG_COLD_FIRST or POOL_DBG_INTEGRITY are set.
When enabling pools integrity checks, we usually prefer to allocate cold
objects first in order to maximize the time the objects spend in the
cache. In order to make this configurable at runtime, let's introduce
a new debugging flag to control this allocation order. It is currently
preset by the DEBUG_POOL_INTEGRITY build-time setting.
This test used to appear at a single location in create_pool() to
enable a check on the pool name or unconditionally merge similarly
sized pools.
This patch introduces POOL_DBG_DONT_MERGE and conditions the test on
this new runtime flag, that is preset according to the aforementioned
debugging option.
The fail-alloc test used to be enabled/disabled at build time using
the DEBUG_FAIL_ALLOC macro, but it happens that the cost of the test
is quite cheap and that it can be enabled as one of the pool_debugging
options.
This patch thus introduces the first POOL_DBG_FAIL_ALLOC option, whose
default value depends on DEBUG_FAIL_ALLOC. The mem_should_fail() function
is now always built, but it was made static since it's never used outside.
This read-mostly variable will be used at runtime to enable/disable
certain pool-debugging features and will be set by the command-line
parser. A future option -dP will take a number of debugging features
as arguments to configure this variable's contents.
Add the ability to set a "server timeout" on the httpclient with either
the httpclient_set_timeout() API or the timeout argument in a request.
Issue #1470.
This function was renderred obsolete by commit a0b5831ee ("MEDIUM: pools:
centralize cache eviction in a common function") which replaced its last
call inside the loop with a single call out of the loop to pool_releasable()
as introduced by commit 91a8e28f9 ("MINOR: pool: add a function to estimate
how many may be released at once"). Let's remove it before it becomes wrong
and used again.
In htx_copy_msg(), if the destination buffer is empty, we perform a raw copy
of the message instead of a copy block per block. But we must be sure the
destianation buffer was really allocated. In other word, to perform a raw
copy, the HTX message must be empty _AND_ it must have some free space
available.
This function is only used to copy an HTTP reply (for instance, an error or
a redirect) in the buffer of the response channel. For now, we are sure the
buffer was allocated because it is a pre-requisite to call stream
analyzers. However, it may be a source of bug in future.
This patch may be backported as far as 2.3.
Implement the stream rcv_buf operation on QUIC mux.
A new buffer is stored in qcs structure named app_buf. This new buffer
will contains HTX and will be filled for example on H3 DATA frame
parsing.
The rcv_buf operation transfer as much as possible data from the HTX
from app_buf to the conn-stream buffer. This is mainly identical to
mux-h2. This is required to support HTTP POST data.
Move the QUIC datagram handlers oustide of the receivers. Use a global
handler per-thread which is allocated on post-config. Implement a free
function on process deinit to avoid a memory leak.
Since the relaxation of the run-queue locks in 2.0 there has been a
very small but existing race between expired tasks and running tasks:
a task might be expiring and being woken up at the same time, on
different threads. This is protected against via the TASK_QUEUED and
TASK_RUNNING flags, but just after the task finishes executing, it
releases it TASK_RUNNING bit an only then it may go to task_queue().
This one will do nothing if the task's ->expire field is zero, but
if the field turns to zero between this test and the call to
__task_queue() then three things may happen:
- the task may remain in the WQ until the 24 next days if it's in
the future;
- the task may prevent any other task after it from expiring during
the 24 next days once it's queued
- if DEBUG_STRICT is set on 2.4 and above, an abort may happen
- since 2.2, if the task got killed in between, then we may
even requeue a freed task, causing random behaviour next time
it's found there, or possibly corrupting the tree if it gets
reinserted later.
The peers code is one call path that easily reproduces the case with
the ->expire field being reset, because it starts by setting it to
TICK_ETERNITY as the first thing when entering the task handler. But
other code parts also use multi-threaded tasks and rightfully expect
to be able to touch their expire field without causing trouble. No
trivial code path was found that would destroy such a shared task at
runtime, which already limits the risks.
This must be backported to 2.0.
Along recent evolutions of the pools, we've lost the ability to reliably
detect double-frees because while in the past the same pointer was being
used to chain the objects in the cache and to store the pool's address,
since 2.0 they're different so the pool's address is never overwritten on
free() and a double-free will rarely be detected.
This patch sets the caller's return address there. It can never be equal
to a pool's address and will help guess what was the previous call path.
It will not work on exotic architectures nor with very old compilers but
these are not the environments where we're trying to get detailed bug
reports, and this is not done by default anyway so we don't care about
this limitation. Note that depending on the inlining status of the
function, the result may differ but that's no big deal either.
A test by placing a double free of an appctx inside the release handler
itself successfully reported the trouble during appctx_free() and showed
that the return address was in stream_int_shutw_applet() (this one calls
the release handler).
During global eviction we're visiting nodes from the LRU tail and we
determine their pool cache head and their pool. In order to make sure
we never mess up, let's add some backwards pointer to the thread number
and pool from the pool_cache_head. It's 64-byte aligned anyway so we're
not wasting space and it helps for debugging and will prevent memory
corruption the earliest possible.
When destroying a pool (e.g. at exit or when resizing buffers), it's
important to try to free all their local objects otherwise we can leave
some in the cache. This is particularly visible when changing "bufsize",
because "show pools" will then show two "trash" pools, one of which
contains a single object in cache (which is fortunately not reachable).
In all cases this happens while single-threaded so that's easy to do,
we just have to do it on the current thread.
The easiest way to do this is to pass an extra argument to function
pool_evict_from_local_cache() to force a full flush instead of a
partial one.
This can probably be backported to about all branches where this
applies, but at least 2.4 needs it.
DH structure is a low-level one that should not be used anymore with
OpenSSLv3. All functions working on DH were marked as deprecated and
this patch replaces the ones we used with new APIs recommended in
OpenSSLv3, be it in the migration guide or the multiple new manpages
they created.
This patch replaces all mentions of the DH type by the HASSL_DH one,
which will be replaced by EVP_PKEY with OpenSSLv3 and will remain DH on
older versions. It also uses all the newly created helper functions that
enable for instance to load DH parameters from a file into an EVP_PKEY,
or to set DH parameters into an SSL_CTX for use in a DHE negotiation.
The following deprecated functions will effectively disappear when
building with OpenSSLv3 : DH_set0_pqg, PEM_read_bio_DHparams, DH_new,
DH_free, DH_up_ref, SSL_CTX_set_tmp_dh.
Starting from OpenSSLv3, we won't rely on the
SSL_CTX_set_tmp_dh_callback mechanism so we will need to know the DH
size we want to use during init. In order for the default DH param size
to be used when no RSA or DSA private key can be found for a given bind
line, we will need to know the default size we want to use (which was
not possible the way the code was built, since the global default dh
size was set too late.
This new function makes use of the new OpenSSLv3 APIs that should be
used to load DH parameters from a file (or a BIO in this case) and that
should replace the deprecated PEM_read_bio_DHparams function.
Note that this function returns an EVP_PKEY when using OpenSSLv3 since
they now advise against using low level structures such as DH ones.
This helper function is not used yet so this commit should be stricly
iso-functional, regardless of the OpenSSL version.
The DH mechanism relies on DH objects that are low-level structures that
should not be used anymore starting from OpenSSLv3. With the newer
OpenSSL version, we should only use higher level EVP_PKEY objects.
Since enforcing this new logic to older versions of OpenSSL could be
dangerous (or plain impossible), we will keeptwo versions of the code
when required.
The HASSL_DH define will allow to unify some of the functions that were
created for DH use without having to add too many duplicated blocks of
code depending on the OpenSSL version.
ERR_func_error_string does not return anything anymore with OpenSSLv3,
it can be replaced by ERR_peek_error_func which did not exist on
previous versions.
Rename quic_conn_to_buf to qc_snd_buf and remove it from xprt ops. This
is done to reflect the true usage of this function which is only a
wrapper around sendto but cannot be called by the upper layer.
qc_snd_buf is moved in quic-sock because to mark its link with
quic_sock_fd_iocb which is the recvfrom counterpart.
SSL_CTX_set_tlsext_ticket_key_cb was deprecated on OpenSSLv3 because it
uses an HMAC_pointer which is deprecated as well. According to the v3's
manpage it should be replaced by SSL_CTX_set_tlsext_ticket_key_evp_cb
which uses a EVP_MAC_CTX pointer.
This new callback was introduced in OpenSSLv3 so we need to keep the two
calls in the source base and to split the usage depending on the OpenSSL
version.
"mcli-debug-mode on" enables every command that were meant for a worker,
on the CLI of the master. Which mean you can issue, "show fd", show
stat" in order to debug the MASTER proxy.
You can also combine it with "expert-mode on" or "experimental-mode on"
to access to more commands.
Allow to set the master CLI in expert or experimental mode. No command
within the master are unlocked yet, but it gives the ability to send
expert or experimental commands to the workers.
echo "@1; experimental-mode on; del server be1/s2" | socat /var/run/haproxy.master -
echo "experimental-mode on; @1 del server be1/s2" | socat /var/run/haproxy.master -
We'll need to lock the listener a little bit more during accept() and
tests show that a spinlock is a massive performance killer, so let's
first switch to an rwlock for this lock.
This patch might have to be backported for the next patch to work, and
if so, the change is almost mechanical (look for LISTENER_LOCK), but do
not forget about the few HA_SPIN_INIT() in the file. There's no reference
to this lock outside of listener.c nor listener-t.h.
This task will be used to schedule a timer when there is no activity on
the mux. The timeout is set via the "timeout client" from the
configuration file.
The timeout task process schedule the timeout only on specific
conditions. Currently, it's done if there is no opened bidirectional
stream.
For now this task is not used. This will be implemented in the following
commit.
It's among the cases that would provoke memory corruption, let's add
some tests against negative FDs and those larger than the table. This
must never ever happen and would currently result in silent corruption
or a crash. Better have a noticeable one exhibiting the call chain if
that were to happen.
We add a new flag to mark a connection as already enqueued for acception.
This is useful for 0-RTT session where a connection is first enqueued for
acception as soon as 0-RTT RX secrets could be derived. Then as for any other
connection, we could accept one more time this connection after handshake
completion which lead to very bad side effects.
Thank you to Amaury for this nice patch.
When starting HAProxy in master-worker, the master pre-allocate a struct
mworker_proc and do a socketpair() before the configuration parsing. If
the configuration loading failed, the FD are never closed because they
aren't part of listener, they are not even in the fdtab.
This patch fixes the issue by cleaning the mworker_proc structure that
were not asssigned a process, and closing its FDs.
Must be backported as far as 2.0, the srv_drop() only frees the memory
and could be dropped since it's done before an exec().
There were a few casts of list* to mt_list* that were upsetting some
old compilers (not sure about the effect on others). We had created
list_to_mt_list() purposely for this, let's use it instead of applying
this cast.
At a few places in the code the switch/case ond flags are tested against
64-bit constants without explicitly being marked as long long. Some
32-bit compilers complain that the constant is too large for a long, and
other likely always use long long there. Better fix that as it's uncertain
what others which do not complain do. It may be backported to avoid doubts
on uncommon platforms if needed, as it touches very few areas.
These functions are declared as external functions in check.h and
as inline functions in check.c. Let's move them as static inline in
check.h. This appeared in 2.4 with the following commits:
4858fb2e1 ("MEDIUM: check: align agentaddr and agentport behaviour")
1c921cd74 ("BUG/MINOR: check: consitent way to set agentaddr")
While harmless (it only triggers build warnings with some gcc 4.x),
it should probably be backported where the paches above are present
to keep the code consistent.
The man page indicates that CPU_AND() and CPU_ASSIGN() take a variable,
not a const on the source, even though it doesn't make much sense. But
with older libcs, this triggers a build warning:
src/cpuset.c: In function 'ha_cpuset_and':
src/cpuset.c:53: warning: initialization discards qualifiers from pointer target type
src/cpuset.c: In function 'ha_cpuset_assign':
src/cpuset.c:101: warning: initialization discards qualifiers from pointer target type
Better stick stricter to the documented API as this is really harmless
here. There's no need to backport it (unless build issues are reported,
which is quite unlikely).
We have an implementation of atomic ops for older versions of gcc that
do not provide the __builtin_* API (< 4.4). Recent changes to the pools
broke that in pool_releasable() by having a load from a const pointer,
which doesn't work there due to a temporary local variable that is
declared then assigned. Let's make use of a compount statement to assign
it a value when declaring it.
There's no need to backport this.
The startup code used to scan the list of unused sockets retrieved from
an older process, and to close them one by one. This also required that
the knowledge of the internal storage of these temporary sockets was
known from outside sock.c and that the code was copy-pasted at every
call place.
This patch moves this into sock.c under the name
sock_drop_unused_old_sockets(), and removes the xfer_sock_list
definition from sock.h since the rest of the code doesn't need to know
this.
This cleanup is minimal and preliminary to a future fix that will need
to be backported to all versions featuring FD transfers over the CLI.
Do not use an extra DCID parameter on new_quic_cid to be able to
associated a new generated CID to a thread ID. Simply do the computation
inside the function. The API is cleaner this way.
This also has the effects to improve the apparent randomness of CIDs.
With the previous version the first byte of all CIDs are identical for a
connection which could lead to privacy issue. This version may not be
totally perfect on this aspect but it improves the situation.
The CID trees are no more attached to the listener receiver but to the
underlying datagram handlers (one by thread) which run always on the same thread.
So, any operation on these trees do not require any locking.
We copy the first octet of the original destination connection ID to any CID for
the connection calling new_quic_cid(). So this patch modifies only this function
to take a dcid as passed parameter.
Rename quic_lstnr_dgram_read() to quic_lstnr_dgram_dispatch() to reflect its new role.
After calling this latter, the sock i/o handler must consume the buffer only if
the datagram it received is detected as wrong by quic_lstnr_dgram_dispatch().
The datagram handler task mark the datagram as consumed atomically setting ->buf
to NULL value. The sock i/o handler is responsible of flushing its RX buffer
before using it. It also keeps a datagram among the consumed ones so that
to pass it to quic_lstnr_dgram_dispatch() and prevent it from allocating a new one.
As mentionned in the comment, the tx_qrings and rxbufs members of
receiver struct must be pointers to pointers!
Modify the functions responsible of their allocations consequently.
Note that this code could work because sizeof rxbuf and sizeof tx_qrings
are greater than the size of pointer!
The quic_dgram_ctx struct has been replaced by quic_dgram struct.
There is no need to keek a typedef for a pointer to function since we
converted the UDP datagram parser (quic_dgram_read()) into a task.
quic_dgram_read() parses all the QUIC packets from a UDP datagram. It is the best
candidate to be converted into a task, because is processing data unit is the UDP
datagram received by the QUIC sock i/o handler. If correct, this datagram is
added to the context of a task, quic_lstnr_dghdlr(), a conversion of quic_dgram_read()
into a task. This task pop a datagram from an mt_list and passes it among to
the packet handler (quic_lstnr_pkt_rcv()).
Modify the quic_dgram struct to play the role of the old quic_dgram_ctx struct when
passed to quic_lstnr_pkt_rcv().
Modify the datagram handlers allocation to set their tasks to quic_lstnr_dghdlr().
Add quic_dghdlr new struct do define datagram handler tasks, one by thread.
Allocate them and attach them to the listener receiver part calling
quic_alloc_dghdlrs_listener() newly implemented function.
Add quic_dgram new structure to store information about datagrams received
by the sock I/O handler (quic_sock_fd_iocb) and its associated pool.
Implement quic_get_dgram_dcid() to retrieve the datagram DCID which must
be the same for all the packets in the datagram.
Modify quic_lstnr_dgram_read() called by the sock I/O handler to allocate
a quic_dgram each time a correct datagram is found and add it to the sock I/O
handler rxbuf dgram list.
Define the offsets of the DCIDs from the beginning of a QUIC packets.
Note that they must always be present. As QUIC servers, QUIC haproxy listeners
always use a CID, source CID on the haproxy side, which is a destination ID on the
peer side.
This is to be sure xprt functions do not manipulate the buffer struct
passed as parameter to quic_lstnr_dgram_read() from low level datagram
I/O callback in quic_sock.c (quic_sock_fd_iocb()).
In github bug #1517, Mike Lothian reported instant crashes on startup
on RHEL8 + gcc-11 that appeared with 2.4 when allocating a proxy.
The analysis brought us down to the THREAD_ALIGN() entries that were
placed inside the "server" struct to avoid false sharing of cache lines.
It turns out that some modern gcc make use of aligned vector operations
to manipulate some fields (e.g. memset() etc) and that these structures
allocated using malloc() are not necessarily aligned, hence the crash.
The compiler is allowed to do that because the structure claims to be
aligned. The problem is in fact that the alignment propagates to other
structures that embed it. While most of these structures are used as
statically allocated variables, some are dynamic and cannot use that.
A deeper analysis showed that struct server does this, propagates to
struct proxy, which propagates to struct spoe_config, all of which
are allocated using malloc/calloc.
A better approach would consist in usins posix_memalign(), but this one
is not available everywhere and will either need to be reimplemented
less efficiently (by always wasting 64 bytes before the area), or a
few functions will have to be specifically written to deal with the
few structures that are dynamically allocated.
But the deeper problem that remains is that it is difficult to track
structure alignment, as there's no available warning to check this.
For the long term we'll probably have to create a macro such as
"struct_malloc()" etc which takes a type and enforces an alignment
based on the one of this type. This also means propagating that to
pools as well, and it's not a tiny task.
For now, let's get rid of the forced alignment in struct server, and
replace it with extra padding. By punching 63-byte holes, we can keep
areas on separate cache lines. Doing so moderately increases the size
of the "server" structure (~+6%) but that's the best short-term option
and it's easily backportable.
This will have to be backported as far as 2.4.
Thanks to Mike for the detailed report.
Do not proceed to direct accept when creating a new quic_conn. Wait for
the QUIC handshake to succeeds to insert the quic_conn in the accept
queue. A tasklet is then woken up to call listener_accept to accept the
quic_conn.
The most important effect is that the connection/mux layers are not
instantiated at the same time as the quic_conn. This forces to delay
some process to be sure that the mux is allocated :
* initialization of mux transport parameters
* installation of the app-ops
Also, the mux instance is not checked now to wake up the quic_conn
tasklet. This is safe because the xprt-quic code is now ready to handle
the absence of the connection/mux layers.
Note that this commit has a deep impact as it changes significantly the
lower QUIC architecture. Most notably, it breaks the 0-RTT feature.
Create a new structure li_per_thread. This is uses as an array in the
listener structure, with an entry allocated per thread. The new function
li_init_per_thr is responsible of the allocation.
For now, li_per_thread contains fields only useful for QUIC listeners.
As such, it is only allocated for QUIC listeners.
Create a new type quic_accept_queue to handle QUIC connections accept.
A queue will be allocated for each thread. It contains a list of
listeners which contains at least one quic_conn ready to be accepted and
the tasklet to run listener_accept for these listeners.
Mark QUIC listeners with the flag LI_F_QUIC_LISTENER. It is set by the
proto-quic layer on the add listener callback. This allows to override
more clearly the accept callback on quic_session_accept.
Define a new field in listener structure named flags.
For the moment, no flag is defined. This will be notably useful to
differentiate QUIC listeners with the implementation of a QUIC conn
accept queue.
Remove usage of connection in quic_conn_from_buf. As connection and
quic_conn are decorrelated, it is not logical to check connection flags
when using sendto.
This require to store the L4 peer address in quic_conn to be able to use
sendto.
This change is required to delay allocation of connection.
This flag is named RX_F_LOCAL_ACCEPT. It will be activated for special
receivers where connection balancing to threads is already handle
outside of listener_accept, such as with QUIC listeners.
Add a new function in mux-quic to install app-ops. For now this
functions is called during the ALPN negotiation of the QUIC handshake.
This change will be useful when the connection accept queue will be
implemented. It will be thus required to delay the app-ops
initialization because the mux won't be allocated anymore during the
QUIC handshake.
Define a new enum to represent the status of the mux/connection layer
above a quic_conn. This is important to know if it's possible to handle
application data, or if it should be buffered or dropped.
This new option, when set, will cause the callers of pool_alloc() and
pool_free() to be recorded into an extra area in the pool that is expected
to be helpful for later inspection (e.g. in core dumps). For example it
may help figure that an object was released to a pool with some sub-fields
not yet released or that a use-after-free happened after releasing it,
with an immediate indication about the exact line of code that released
it (possibly an error path).
This only works with the per-thread cache, and even objects refilled from
the shared pool directly into the thread-local cache will have a NULL
there. That's not an issue since these objects have not yet been freed.
It's worth noting that pool_alloc_nocache() continues not to set any
caller pointer (e.g. when the cache is empty) because that would require
a possibly undesirable API change.
The extra cost is minimal (one pointer per object) and this completes
well with DEBUG_POOL_INTEGRITY.
This adds a caller to pool_put_to_cache() and pool_get_from_cache()
which will optionally be used to pass a pointer to their callers. For
now it's not used, only the API is extended to support this pointer.
Here the idea is to calculate the POOL_EXTRA size that is appended at
the end of a pool object based on the sum of enabled optional fields
so that we can more easily compute offsets and sizes depending on build
options.
For this, POOL_EXTRA is replaced with POOL_EXTRA_MARK which itself is
set either to sizeof(void*) or zero depending on whether we enable
marking the origin pool or not upon allocation.
The pool_alloc() function was already a wrapper to __pool_alloc() which
was also inlined but took a set of flags. This latter was uninlined and
moved to pool.c, and pool_alloc()/pool_zalloc() turned to macros so that
they can more easily evolve to support debugging options.
The number of call places made this code grow over time and doing only
this change saved ~1% of the whole executable's size.
The pool_free() function has become a bit big over time due to the
extra consistency checks. It used to remain inline only to deal
cleanly with the NULL pointer free that's quite present on some
structures (e.g. in stream_free()).
Here we're splitting the function in two:
- __pool_free() does the inner block without the pointer test and
becomes a function ;
- pool_free() is now a macro that only checks the pointer and calls
__pool_free() if needed.
The use of a macro versus an inline function is only motivated by an
easier intrumentation of the code later.
With this change, the code size reduces by ~1%, which means that at
this point all pool_free() call places used to represent more than
1% of the total code size.
Allow to register quic_conn as ex-data in SSL callbacks. A new index is
used to identify it as ssl_qc_app_data_index.
Replace connection by quic_conn as SSL ex-data when initializing the QUIC
SSL session. When using SSL callbacks in QUIC context, the connection is
now NULL. Used quic_conn instead to retrieve the required parameters.
Also clean up
The same changes are conducted inside the QUIC SSL methods of xprt-quic
: connection instance usage is replaced by quic_conn.
Define a special accept cb for QUIC listeners to quic_session_accept().
This operation is conducted during the proto.add callback when creating
listeners.
A special care is now taken care when setting the standard callback
session_accept_fd() to not overwrite if already defined by the proto
layer.
When enabled, objects picked from the cache are checked for corruption
by comparing their contents against a pattern that was placed when they
were inserted into the cache. Objects are also allocated in the reverse
order, from the oldest one to the most recent, so as to maximize the
ability to detect such a corruption. The goal is to detect writes after
free (or possibly hardware memory corruptions). Contrary to DEBUG_UAF
this cannot detect reads after free, but may possibly detect later
corruptions and will not consume extra memory. The CPU usage will
increase a bit due to the cost of filling/checking the area and for the
preference for cold cache instead of hot cache, though not as much as
with DEBUG_UAF. This option is meant to be usable in production.
We have an anti-looping protection in process_stream() that detects bugs
that used to affect a few filters like compression in the past which
sometimes forgot to handle a read0 or a particular error, leaving a
thread looping at 100% CPU forever. When such a condition is detected,
an alert it emitted and the process is killed so that it can be replaced
by a sane one:
[ALERT] (19061) : A bogus STREAM [0x274abe0] is spinning at 2057156
calls per second and refuses to die, aborting now! Please
report this error to developers [strm=0x274abe0,3 src=unix
fe=MASTER be=MASTER dst=<MCLI> txn=(nil),0 txn.req=-,0
txn.rsp=-,0 rqf=c02000 rqa=10000 rpf=88000021 rpa=8000000
sif=EST,40008 sib=DIS,84018 af=(nil),0 csf=0x274ab90,8600
ab=0x272fd40,1 csb=(nil),0
cof=0x25d5d80,1300:PASS(0x274aaf0)/RAW((nil))/unix_stream(9)
cob=(nil),0:NONE((nil))/NONE((nil))/NONE(0) filters={}]
call trace(11):
| 0x4dbaab [c7 04 25 01 00 00 00 00]: stream_dump_and_crash+0x17b/0x1b4
| 0x4df31f [e9 bd c8 ff ff 49 83 7c]: process_stream+0x382f/0x53a3
(...)
One problem with this detection is that it used to only count the call
rate because we weren't sure how to make it more accurate, but the
threshold was high enough to prevent accidental false positives.
There is actually one case that manages to trigger it, which is when
sending huge amounts of requests pipelined on the master CLI. Some
short requests such as "show version" are sufficient to be handled
extremely fast and to cause a wake up of an analyser to parse the
next request, then an applet to handle it, back and forth. But this
condition is not an error, since some data are being forwarded by
the stream, and it's easy to detect it.
This patch modifies the detection so that update_freq_ctr() only
applies to calls made without CF_READ_PARTIAL nor CF_WRITE_PARTIAL
set on any of the channels, which really indicates that nothing is
happening at all.
This is greatly sufficient and extremely effective, as the call above
is still caught (shutr being ignored by an analyser) while a loop on
the master CLI now has no effect. The "call_rate" field in the detailed
"show sess" output will now be much lower, except for bogus streams,
which may help spot them. This field is only there for developers
anyway so it's pretty fine to slightly adjust its meaning.
This patch could be backported to stable versions in case of reports
of such an issue, but as that's unlikely, it's not really needed.
There is no need to use an MT_LIST to store frames to send from a packet
number space. This is a reminiscence for multi-threading support for the TX part.
For now we have co_getline() which reads a buffer and stops on LF, and
co_getword() which reads a buffer and stops on one arbitrary delimiter.
But sometimes we'd need to stop on a set of delimiters (CR and LF, etc).
This patch adds a new function co_getdelim() which takes a set of delimiters
as a string, and constructs a small map (32 bytes) that's looked up during
parsing to stop after the first delimiter found within the set. It also
supports an optional escape character that skips a delimiter (typically a
backslash). For the rest it works exactly like the two other variants.
During 2.4-dev, fault injection was enabled for cached pools with commit
207c09509 ("MINOR: pools: move the fault injector to __pool_alloc()"),
except that the condition for CONFIG_HAP_POOLS still depended on
DEBUG_FAIL_ALLOC not being set, which limits the usability to cases
where the define is set by hand. Let's remove it from the equation as
this is not a constraint anymore. While a bit old, there's no need to
backport this as it's only used during development.
Implement the emission of Retry packets. These packets are emitted in
response to Initial from clients without token. The token from the Retry
packet contains the ODCID from the Initial packet.
By default, Retry packet emission is disabled and the handshake can
continue without address validation. To enable Retry, a new bind option
has been defined named "quic-force-retry". If set, the handshake must be
conducted only after receiving a token in the Initial packet.
Implement the parsing of token from Initial packets. It is expected that
the token contains a CID which is the DCID from the Initial packet
received from the client without token which triggers a Retry packet.
This CID is then used for transport parameters.
Note that at the moment Retry packet emission is not implemented. This
will be achieved in a following commit.
Implement a new QUIC TLS related function
quic_tls_generate_retry_integrity_tag(). This function can be used to
calculate the AEAD tag of a Retry packet.
If an error is raised during the ClientHello callback on the server side
(ssl_sock_switchctx_cbk), the servername callback won't be called and
the client's SNI will not be saved in the SSL context. But since we use
the SSL_get_servername function to return this SNI in the ssl_fc_sni
sample fetch, that means that in case of error, such as an SNI mismatch
with a frontend having the strict-sni option enabled, the sample fetch
would not work (making strict-sni related errors hard to debug).
This patch fixes that by storing the SNI as an ex_data in the SSL
context in case the ClientHello callback returns an error. This way the
sample fetch can fallback to getting the SNI this way. It will still
first call the SSL_get_servername function first since it is the proper
way of getting a client's SNI when the handshake succeeded.
In order to avoid memory allocations are runtime into this highly used
runtime function, a new memory pool was created to store those client
SNIs. Its entry size is set to 256 bytes since SNIs can't be longer than
255 characters.
This fixes GitHub #1484.
It can be backported in 2.5.
Avoid closing idle connections if a soft stop is in progress.
By default, idle connections will be closed during a soft stop. In some
environments, a client talking to the proxy may have prepared some idle
connections in order to send requests later. If there is no proper retry
on write errors, this can result in errors while haproxy is reloading.
Even though a proper implementation should retry on connection/write
errors, this option was introduced to support back compat with haproxy <
v2.4. Indeed before v2.4, we were waiting for a last request to be able
to add a "connection: close" header and advice the client to close the
connection.
In a real life example, this behavior was seen in AWS using the ALB in
front of a haproxy. The end result was ALB sending 502 during haproxy
reloads.
This patch was tested on haproxy v2.4, with a regular reload on the
process, and a constant trend of requests coming in. Before the patch,
we see regular 502 returned to the client; when activating the option,
the 502 disappear.
This patch should help fixing github issue #1506.
In order to unblock some v2.3 to v2.4 migraton, this patch should be
backported up to v2.4 branch.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
[wt: minor edits to the doc to mention other options to care about]
Signed-off-by: Willy Tarreau <w@1wt.eu>
When block by the anti-amplification limit, this is the responsability of the
client to unblock it sending new datagrams. On the server side, even if not
well parsed, such datagrams must trigger the PTO timer arming.
Switch back to QUIC_HS_ST_SERVER_HANDSHAKE state after a completed handshake
if acks must be send.
Also ensure we build post handshake frames only one time without using prev_st
variable and ensure we discard the Handshake packet number space only one time.
We need to be able to decrypt late Handshake packets after the TLS secret
keys have been discarded. If not the peer send Handshake packet which have
not been acknowledged. But for such packets, we discard the CRYPTO data.
RFC 9002 5.3. Estimating smoothed_rtt and rttvar:
MUST use the lesser of the acknowledgment delay and the peer's max_ack_delay
after the handshake is confirmed.
In ticket #1413, the transfer of FDs couldn't correctly work on alpine
linux. After a few tests with musl on another distribution it seems to
be a limitation of this libc.
The number of FD that could be sent per sendmsg was set to 253, which
does not seem to work with musl, decreasing it 252 seems to work
better, so lets set this value everywhere since it does not have that
much impact.
This must be backported in every maintained version.
Now that we support batched allocations/releases, it appears that we can
reach the same performance on H2 with shared pools and 256kB thread-local
cache as without shared pools, a fast allocator and 1MB thread-local cache.
With 512kB we're up to 10% faster on highly multiplexed H2 than without the
shared cache. This was tested on a 16-core ARM machine. Thus it's time to
slightly reduce the per-thread memory cost, which may also improve the
performance on machines with smaller L2 caches. It essentially reverts
commit f587003fe ("MINOR: pools: double the local pool cache size to 1 MB").
Since previous patch we can forcefully evict multiple objects from the
local cache, even when evicting basd on the LRU entries. Let's define
a compile-time configurable setting to batch releasing of objects. For
now we set this value to 8 items per round.
This is marked medium because eviction from the LRU will slightly change
in order to group the last items that are freed within a single cache
instead of accurately scanning only the oldest ones exactly in their
order of appearance. But this is required in order to evolve towards
batched removals.
In order to support batched allocations and releases, we'll need to
prepare chains of items linked together and that can be atomically
attached and detached at once. For this we implement a "down" pointer
in each pool_item that points to the other items belonging to the same
group. For now it's always NULL though freeing functions already check
them when trying to release everything.
At the moment we count the number of releasable objects to a shared pool
one by one. The way the formula is made allows to pre-compute the number
of available slots, so let's add a function for that so that callers can
do it once before iterating.
This takes into account the average number of entries needed and the
minimum availability per pool. The function is not used yet.
In order to support batch allocation from/to shared pools, we'll have to
support a specific representation for pool objects. The new pool_item
structure will be used for this. For now it only contains a "next"
pointer that matches exactly the current storage model. The few functions
that deal with the shared pool entries were adapted to use the new type.
There is no functionality difference at this point.
Instead of letting pool_put_to_shared_cache() pass the object to the
underlying OS layer when there's no more room, let's have the caller
check if the pool is full and either call pool_put_to_shared_cache()
or call pool_free_nocache().
Doing this sensibly simplifies the code as this function now only has
to deal with a pool and an item and only for cases where there are
local caches and shared caches. As the code was simplified and the
calls more isolated, the function was moved to pool.c.
Note that it's only called from pool_evict_from_local_cache{,s}() and
that a part of its logic might very well move there when dealing with
batches.
This function is used to know whether the shared pools are full or if we
can store more objects in them. Right now it cannot be used in a generic
way because when shared pools are not used it will return false, letting
one think pools can accept objects. Let's make one variant for each build
model.
At the moment pool_put_to_shared_cache() checks if the pool is crowded,
and if so it does the exact same job as pool_free_nocache(), otherwise
it adds the object there.
This patch rearranges the code so that the function is split in two and
either uses one path or the other, and always relies on pool_free_nocache()
in case we don't want to store the object. This way there will be a common
path with the variant not using the shared cache. The patch is better viewed
using git show -b since a whole block got reindented.
It's worth noting that there is a tiny difference now in the local cache
usage measurement, as the decrement of "used" used to be performed before
checking for pool_is_crowded() instead of being done after. This used to
result in always one less object being kept in the cache than what was
configured in minavail. The rearrangement of the code aligns it with
other call places.
Some changes affect the list element and others affect the pool stats.
Better group them together, as the compiler may not detect certain
possible optimizations after the casts made by the list macros.
One of the thread scaling challenges nowadays for the pools is the
contention on the shared caches. There's never any situation where we
have a shared cache and no local cache anymore, so we can technically
afford to transfer objects from the shared cache to the local cache
before returning them to the user via the regular path. This adds a
little bit more work per object per miss, but will permit batch
processing later.
This patch simply moves pool_get_from_shared_cache() to pool.c under
the new name pool_refill_local_from_shared(), and this function does
not return anything but it places the allocated object at the head of
the local cache.
The POOL_LINK macro is now only used for debugging, and it still requires
ifdefs around, which needlessly complicates the code. Let's replace it
and the calling code with a new pair of macros: POOL_DEBUG_SET_MARK()
and POOL_DEBUG_CHECK_MARK(), that respectively store and check the pool
pointer in the extra location at the end of the pool. This removes 4
pairs of ifdefs in the middle of the code.
This practice relying on POOL_LINK() dates from the era where there were
no pool caches, but given that the structures are a bit more complex now
and that pool caches do not make use of this feature, it is totally
useless since released elements have already been overwritten, and yet
it complicates the architecture and prevents from making simplifications
and optimizations. Let's just get rid of this feature. The pointer to
the origin pool is preserved though, as it helps detect incorrect frees
and serves as a canary for overflows.
The pools have become complex with the shared pools and the thread-local
caches, and the purpose of certain structures is never easy to grasp.
Let's add a bit of documentation there to save some long and painful
analysis to those touching that area.
This bug was introduced by d817dc73 ("MEDIUM: ssl: Load client
certificates in a ckch for backend servers") in which the creation of
the SSL_CTX for a server was moved to the configuration parser when
using a "crt" keyword instead of being done in ssl_sock_prepare_srv_ctx().
The patch 0498fa40 ("BUG/MINOR: ssl: Default-server configuration ignored by
server") made it worse by setting the same SSL_CTX for every servers
using a default-server. Resulting in any SSL option on a server applied
to every server in its backend.
This patch fixes the issue by reintroducing a string which store the
path of certificate inside the server structure, and loading the
certificate in ssl_sock_prepare_srv_ctx() again.
This is a quick fix to backport, a cleaner way can be achieve by always
creating the SSL_CTX in ssl_sock_prepare_srv_ctx() and splitting
properly the ssl_sock_load_srv_cert() function.
This patch fixes issue #1488.
Must be backported as far as 2.4.
This is a second help to dump loaded library names late at boot, once
external code has already been initialized. The purpose is to provide
a format that makes it easy to pass to "tar" to produce an archive
containing the executable and the list of dependencies. For example
if haproxy is started as "haproxy -f foo.cfg", a config check only
will suffice to quit before starting, "-q" will be used to disable
undesired output messages, and -dL will be use to dump libraries.
This will result in such a command to trivially produce a tarball
of loaded libraries:
./haproxy -q -c -dL -f foo.cfg | tar -T - -hzcf archive.tgz
Many times core dumps reported by users who experience trouble are
difficult to exploit due to missing system libraries. Sometimes,
having just a list of loaded libraries and their respective addresses
can already provide some hints about some problems.
This patch makes a step in that direction by adding a new "show libs"
command that will try to enumerate the list of object files that are
loaded in memory, relying on the dynamic linker for this. It may also
be used to detect that some foreign code embarks other undesired libs
(e.g. some external Lua modules).
At the moment it's only supported on glibc when USE_DL is set, but it's
implemented in a way that ought to make it reasonably easy to be extended
to other platforms.
We'll use this glibc function to dump loaded libs. It's been
available since glibc-2.2.4, and as it requires dlpi headers defined
in link.h, it implicitly relies on dlfcn, thus we condition it to
USE_DL. Other operating systems or libc might have different
dependencies so let's stick to the bare minimum for now.
A subtle change of target address allocation was introduced with commit
68cf3959b ("MINOR: backend: rewrite alloc of stream target address") in
2.4. Prior to this patch, a target address was allocated by function
assign_server_address() only if none was previously allocated. After
the change, the allocation became unconditional. Most of the time it
makes no difference, except when we pass multiple times through
connect_server() with SF_ADDR_SET cleared.
The most obvious fix would be to avoid allocating that address there
when already set, but the root cause is that since introduction of
dynamically allocated addresses, the SF_ADDR_SET flag lies. It can
be cleared during redispatch or during a queue redistribution without
the address being released.
This patch instead gives back all its correct meaning to SF_ADDR_SET
and guarantees that when not set no address is allocated, by freeing
that address at the few places the flag is cleared. The flag could
even be removed so that only the address is checked but that would
require to touch many areas for no benefit.
The easiest way to test it is to send requests to a proxy with l7
retries enabled, which forwards to a server returning 500:
defaults
mode http
timeout client 1s
timeout server 1s
timeout connect 1s
retry-on all-retryable-errors
retries 1
option redispatch
listen proxy
bind *:5000
server app 0.0.0.0:5001
frontend dummy-app
bind :5001
http-request return status 500
Issuing "show pools" on the CLI will show that pool "sockaddr" grows
as requests are redispatched, and remains stable with the fix. Even
"ps" will show that the process' RSS grows by ~160B per request.
This fix will need to be backported to 2.4. Note that before 2.5,
there's no strm->si[1].dst, strm->target_addr must be used instead.
This addresses github issue #1499. Special thanks to Daniil Leontiev
for providing a well-documented reproducer.
Implement a refcount on quic_conn instance. By default, the refcount is
0. Two functions are implemented to manipulate it.
* qc_conn_take() which increments the refcount
* qc_conn_drop() which decrements it. If the refcount is 0 *BEFORE*
the substraction, the instance is freed.
The refcount is incremented on retrieve_qc_conn_from_cid() or when
allocating a new quic_conn in qc_lstnr_pkt_rcv(). It is substracted most
notably by the xprt.close operation and at the end of
qc_lstnr_pkt_rcv(). The increments/decrements should be conducted under
the CID lock to guarantee thread-safety.
Add a pointer in quic_conn to its related ssl_sock_ctx. This change is
required to avoid to use the connection instance to access it.
This commit is part of the rearchitecture of xprt-quic layers and the
separation between xprt and connection instances. It will be notably
useful when the connection allocation will be delayed.
Some applications may send some information about the reason why they decided
to close a connection. Add them to CONNECTION_CLOSE frame traces.
Take the opportunity of this patch to shorten some too long variable names
without any impact.
Add traces about important frame types to chunk_tx_frm_appendf()
and call this function for any type of frame when parsing a packet.
Move it to quic_frame.c
Prepare trace support for quic_conn instances as argument. This will be
used by the xprt-quic layer in replacement of the connection.
This commit is part of the rearchitecture of xprt-quic layers and the
separation between xprt and connection instances.
Add const qualifier on arguments of several dump functions used in the
trace callback. This is required to be able to replace the first trace
argument by a quic_conn instance. The first argument is a const pointer
and so the members accessed through it must also be const.
Add a new member in ssl_sock_ctx structure to reference the quic_conn
instance if used in the QUIC stack. This member is initialized during
qc_conn_init().
This is needed to be able to access to the quic_conn without relying on
the connection instance. This commit is part of the rearchitecture of
xprt-quic layers and the separation between xprt and connection
instances.
Move qcc_get_qcs() function from xprt_quic.c to mux_quic.c. This
function is used to retrieve the qcs instance from a qcc with a stream
id. This clearly belongs to the mux-quic layer.
When a packet is present in the RX buffer at the first place
but without a null reference counter, there is no need to continue
to try to empty the buffer, it is sure the next packet will not
be at the first place!
With the DCID refactoring, the locking is more centralized. It is
possible to simplify the code for removal of a quic_conn from the ODCID
tree.
This operation can be conducted as soon as the connection has been
retrieved from the DCID tree, meaning that the peer now uses the final
DCID. Remove the bit to flag a connection for removal and just uses
ebmb_delete() on each sucessful lookup on the DCID tree. If the
quic_conn has already been removed, it is just a noop thanks to
eb_delete() implementation.
A new function named qc_retrieve_conn_from_cid() now contains all the
code to retrieve a connection from a DCID. It handle all type of packets
and centralize the locking on the ODCID/DCID trees.
This simplify the qc_lstnr_pkt_rcv() function.
If an UDP datagram contains multiple QUIC packets, they must all use the
same DCID. The datagram context is used partly for this.
To ensure this, a comparison was made on the dcid_node of DCID tree. As
this is a comparison based on pointer address, it can be faulty when
nodes are removed/readded on the same pointer address.
Replace this comparison by a proper comparison on the DCID data itself.
To this end, the dgram_ctx structure contains now a quic_cid member.
For first Initial packets, the socket source dest address is
concatenated to the DCID. This is used to be able to differentiate
possible collision between several clients which used the same ODCID.
Refactor the code to manage DCID and the concatenation with the address.
Before this, the concatenation was done on the quic_cid struct and its
<len> field incremented. In the code it is difficult to differentiate a
normal DCID with a DCID + address concatenated.
A new field <addrlen> has been added in the quic_cid struct. The <len>
field now only contains the size of the QUIC DCID. the <addrlen> is
first initialized to 0. If the address is concatenated, it will be
updated with the size of the concatenated address. This now means we
have to explicitely used either cid.len or cid.len + cid.addrlen to
access the DCID or the DCID + the address. The code should be clearer
thanks to this.
The field <odcid_len> in quic_rx_packet struct is now useless and has
been removed. However, a new parameter must be added to the
qc_new_conn() function to specify the size of the ODCID addrlen.
On haproxy implementation, generated DCID are on 8 bytes, the minimal
value allowed by the specification. Rename the constant representing
this size to inform that this is haproxy specific.
The packet number space flags were mixed with the connection level flags.
This leaded to ACK to be sent at the connection level without regard to
the underlying packet number space. But we want to be able to acknowleged
packets for a specific packet number space.
A client sends a 0-RTT data packet after an Initial one in the same datagram.
We must be able to parse such packets just after having parsed the Initial packets.
Export the code responsible which set the ->app_ops structure into
quic_set_app_ops() function. It must be called by the TLS callback which
selects the application (ssl_sock_advertise_alpn_protos) so that
to be able to build application packets after having received 0-RTT data.
This field is no more useful. Modify the traces consequently.
Also initialize ->pn_node.key value to -1, which is an illegal value
for QUIC packet number, and display it in traces if different from -1.
This patch adds the parsing of the optional condition parameters that
can be passed to the set-var and set-var-fmt actions (http as well as
tcp). Those conditions will not be taken into account yet in the var_set
function so conditions passed as parameters will not have any effect.
Since actions do not benefit from the parameter preparsing that
converters have, parsing conditions needed to be done by hand.
This patch adds the parsing of the optional condition parameters that
can be passed to the set-var converter. Those conditions will not be
taken into account yet in the var_set function so conditions passed as
parameters will not have any effect. This is true for any condition
apart from the "ifexists" one that is also used to replace the
VF_UPDATEONLY flag that was used to prevent proc scope variable creation
from a LUA module.
In LibreSSL 3.5.0, BIO is going to become opaque, so haproxy's
compat macros will no longer work. The functions they substitute
have been available since LibreSSL 2.7.0.
allowing for all platforms supporting cpu affinity to have a chance
to detect the cpu topology from a given valid node (e.g.
DragonflyBSD seems to be NUMA aware from a kernel's perspective
and seems to be willing start to provide userland means to get
proper info).
This was reported by the CI wich clang as compilator.
In file included from src/ssl_sock.c:80:
include/haproxy/xprt_quic.h:1100:50: error: passing 'int *' to parameter of
type 'unsigned int *' converts between pointers to integer types with
different sign [-Werror,-Wpointer-sign]
} while (refcnt && !HA_ATOMIC_CAS(&pkt->refcnt, &refcnt, refcnt - 1));
^~~~~~~
Initialize all flow control members on the qcc instance. Without this,
the value are undefined and it may be possible to have errors about
reached streams limit.
The xprt layer is reponsible to notify the mux of a CONNECTION_CLOSE
reception. In this case the flag QC_CF_CC_RECV is positionned on the
qcc and the mux tasklet is waken up.
One of the notable effect of the QC_CF_CC_RECV is that each qcs will be
released even if they have remaining data in their send buffers.
A qcs is not freed if there is remaining data in its buffer. In this
case, the flag QC_SF_DETACH is positionned.
The qcc io handler is responsible to remove the qcs if the QC_SF_DETACH
is set and their buffers are empty.
Replace bug.h by api.h in mux_quic header.
This is required because bug.h uses atomic operations when compiled with
DEBUG_MEM_STATS. api.h takes care of including atomic.h before bug.h.
Set the HTX EOM flag on RX the app layer. This is required to notify
about the end of the request for the stream analyzers, else the request
channel never goes to MSG_DONE state.
Remove qc_eval_pkt() which has come with the multithreading support. It
was there to evaluate the length of a TX packet before building. We could
build from several thread TX packets without consuming a packet number for nothing (when
the building failed). But as the TX packet building functions are always
executed by the same thread, the one attached to the connection, this does
not make sense to continue to use such a function. Furthermore it is buggy
since we had to recently pad the TX packet under certain circumstances.
After the handshake has succeeded, we must delete any remaining
Initial or Handshake packets from the RX buffer. This cannot be
done depending on the state the connection (->st quic_conn struct
member value) as the packet are not received/treated in order.
Add a null byte to the end of the RX buffer to notify the consumer there is no
more data to treat.
Modify quic_rx_packet_pool_purge() which is the function which remove the
RX packet from the buffer.
Also rename this function to quic_rx_pkts_del().
As the RX packets may be accessed by the QUIC connection handler (quic_conn_io_cb())
the function responsible of decrementing their reference counters must not
access other information than these reference counters! It was a very bad idea
to try to purge the RX buffer asap when executing this function.
Handle the case when the app layer sending buffer is full. A new flag
QC_SF_BLK_MROOM is set in this case and the transfer is interrupted. It
is expected that then the conn-stream layer will subscribe to SEND.
The MROOM flag is reset each time the muxer transfer data from the app
layer to its own buffer. If the app layer has been subscribed on SEND it
is woken up.
Implement the subscription in the mux on the qcs instance.
Subscribe is now used by the h3 layer when receiving an incomplete frame
on the H3 control stream. It is also used when attaching the remote
uni-directional streams on the h3 layer.
In the qc_send, the mux wakes up the qcs for each new transfer executed.
This is done via the method qcs_notify_send().
The xprt wakes up the qcs when receiving data on unidirectional streams.
This is done via the method qcs_notify_recv().
Set the QC_SF_FIN_STREAM on the app layers (h3 / hq-interop) when
reaching the HTX EOM. This is used to warn the mux layer to set the FIN
on the QUIC stream.
Re-implement the QUIC mux. It will reuse the mechanics from the previous
mux without all untested/unsupported features. This should ease the
maintenance.
Note that a lot of features are broken for the moment. They will be
re-implemented on the following commits to have a clean commit history.
ha_backtrace_to_stderr() must be declared in CRASH_NOW() macro whe HAProxy
is compiled with DEBUG_STRICT_NOCRASH. Otherwise an error is reported during
compilation:
include/haproxy/bug.h:58:26: error: implicit declaration of function ‘ha_backtrace_to_stderr’ [-Werror=implicit-function-declaration]
58 | #define CRASH_NOW() do { ha_backtrace_to_stderr(); } while (0)
This patch must be backported as far as 2.4.
If H1 headers are not fully received at once, the parsing is restarted a
last time when all headers are finally received. When this happens, the h1m
flags are sanitized to remove all value set during parsing.
But some flags where erroneously preserved. Among others, H1_MF_TE_CHUNKED
flag was not removed, what could lead to parsing error.
To fix the bug and make things easy, a mask has been added with all flags
that must be preserved. It will be more stable. This mask is used to
sanitize h1m flags.
This patch should fix the issue #1469. It must be backported to 2.5.
When the response is parsed, query items are stored in a list, attached to
the parsed response (resolve_response).
First, there is one and only one query sent at a time. Thus, there is no
reason to use a list. There is a test to be sure there is only one query
item in the response. Then, the reference on this query item is only used to
validate the domain name is the one requested. So the query list can be
removed. We only expect one query item, no reason to loop on query records.
In addition, the query domain name is now immediately checked against the
resolution domain name. This way, the query item is only manipulated during
the response parsing.
During post-parsing stage, the SSL context of a server is initialized if SSL
is configured on the server or its default-server. It is required to be able
to enable SSL at runtime. However a regression was introduced, because the
last parsed default-server is used. But it is not necessarily the
default-server line used to configure the server. This may lead to
erroneously initialize the SSL context for a server without SSL parameter or
the skip it while it should be done.
The problem is the default-server used to configure a server is not saved
during configuration parsing. So, the information is lost during the
post-parsing. To fix the bug, the SRV_F_DEFSRV_USE_SSL flag is
introduced. It is used to know when a server was initialized with a
default-server using SSL.
For the record, the commit f63704488e ("MEDIUM: cli/ssl: configure ssl on
server at runtime") has introduced the bug.
This patch must be backported as far as 2.4.
Apple libmalloc has its own notion of memory arenas as malloc_zone with
rich API having various callbacks for various allocations strategies but
here we just use the defaults.
In trim_all_pools, we advise to purge each zone as much as possible, called "greedy" mode.
As soon as the connection ID (the one choosen by the QUIC server) has been used
by the client, we can delete its original destination connection ID from its tree.
When running Key Update process, we must maintain much information
especially when the key phase bit has been toggled by the peer as
it is possible that it is due to late packets. This patch adds
quic_tls_kp new structure to do so. They are used to store
previous and next secrets, keys and IVs associated to the previous
and next RX key phase. We also need the next TX key phase information
to be able to encrypt packets for the next key phase.
When sending a CONNECTION_CLOSE frame to immediately close the connection,
do not provide CRYPTO data to the TLS stack. Do not built anything else than a
CONNECTION_CLOSE and do not derive any secret when in immediately close state.
Seize the opportunity of this patch to rename ->err quic_conn struct member
to ->error_code.
We set this TLS error when no application protocol could be negotiated
via the TLS callback concerned. It is converted as a QUIC CRYPTO_ERROR
error (0x178).
Change the way the CIDs are organized to rattach received packets DCID
to QUIC connection. This is necessary to be able to handle multiple DCID
to one connection.
For this, the quic_connection_id structure has been extended. When
allocated, they are inserted in the receiver CID tree instead of the
quic_conn directly. When receiving a packet, the receiver tree is
inspected to retrieve the quic_connection_id. The quic_connection_id
contains now contains a reference to the QUIC connection.
Add ->err member to quic_conn struct to store the connection errors.
This is the responsability of ->send_alert callback of SSL_QUIC_METHOD
struct to handle the TLS alert and consequently update ->err value.
At this time, when entering qc_build_pkt() we build a CONNECTION_CLOSE
frame close the connection when ->err value is not null.
If we want to run quic-tracker against haproxy, we must at least
support the draft version of the TLS extension for the QUIC transport
parameters (0xffa5). quic-tracker QUIC version is draft-29 at this time.
We select this depending on the QUIC version. If draft, we select the
draft TLS extension.
When establishing an outboud connection, haproxy checks if the cached
TLS session has the same SNI as the connection we are trying to
resume.
This test was done by calling SSL_get_servername() which in TLSv1.2
returned the SNI. With TLSv1.3 this is not the case anymore and this
function returns NULL, which invalidates any outboud connection we are
trying to resume if it uses the sni keyword on its server line.
This patch fixes the problem by storing the SNI in the "reused_sess"
structure beside the session itself.
The ssl_sock_set_servername() now has a RWLOCK because this session
cache entry could be accessed by the CLI when trying to update a
certificate on the backend.
This fix must be backported in every maintained version, however the
RWLOCK only exists since version 2.4.
