Add a new command that will send all the listening sockets, via the
stats socket, and their properties.
This is a first step to workaround the linux problem when reloading
haproxy.
There's a test after a successful synchronous connect() consisting
in waking the data layer up asap if there's no more handshake.
Unfortunately this test is run before setting the CO_FL_SEND_PROXY
flag and before the transport layer adds its own flags, so it can
indicate a willingness to send data while it's not the case and it
will have to be handled later.
This has no visible effect except a useless call to a function in
case of health checks making use of the proxy protocol for example.
Additionally a corner case where EALREADY was returned and considered
equivalent to EISCONN was fixed so that it's considered equivalent to
EINPROGRESS given that the connection is not complete yet. But this
code should never return on the first call anyway so it's mostly a
cleanup.
This fix should be backported to 1.7 and 1.6 at least to avoid
headaches during some debugging.
When a connect() to a unix socket returns EAGAIN we talk about
"no free ports" in the error/debug message, which only makes
sense when using TCP.
Explain connect() failure and suggest troubleshooting server
backlog size.
Abstract namespace sockets ignore the shutdown() call and do not make
it possible to temporarily stop listening. The issue it causes is that
during a soft reload, the new process cannot bind, complaining that the
address is already in use.
This change registers a new pause() function for unix sockets and
completely unbinds the abstract ones since it's possible to rebind
them later. It requires the two previous patches as well as preceeding
fixes.
This fix should be backported into 1.5 since the issue apperas there.
Jan Seda noticed that abstract sockets are incompatible with soft reload,
because the new process cannot bind and immediately fails. This patch marks
the binding as retryable and not fatal so that the new process can try to
bind again after sending a signal to the old process.
Note that this fix is not enough to completely solve the problem, but it
is necessary. This patch should be backported to 1.5.
When bind() fails (function uxst_bind_listener()), the fail path doesn't
consider the abstract namespace and tries to unlink paths held in
uninitiliazed memory (tempname and backname). See the strace excerpt;
the strings still hold the path from test1.
===============================================================================================
23722 bind(5, {sa_family=AF_FILE, path=@"test2"}, 110) = -1 EADDRINUSE (Address already in use)
23722 unlink("/tmp/test1.sock.23722.tmp") = -1 ENOENT (No such file or directory)
23722 close(5) = 0
23722 unlink("/tmp/test1.sock.23722.bak") = -1 ENOENT (No such file or directory)
===============================================================================================
This patch should be backported to 1.5.
Plain "tcp" health checks sent to a unix socket cause two connect()
calls to be made, one to connect, and a second one to verify that the
connection properly established. But with unix sockets, we get
immediate notification of success, so we can avoid this second
attempt. However we need to ensure that we'll visit the connection
handler even if there's no remaining handshake pending, so for this
we claim we have some data to send in order to enable polling for
writes if there's no more handshake.
These sockets are the same as Unix sockets except that there's no need
for any filesystem access. The address may be whatever string both sides
agree upon. This can be really convenient for inter-process communications
as well as for chaining backends to frontends.
These addresses are forced by prepending their address with "abns@" for
"abstract namespace".
We've had everything in place for this for a while now, we just missed
the connect function for UNIX sockets. Note that in order to connect to
a UNIX socket inside a chroot, the path will have to be relative to the
chroot.
UNIX sockets connect about twice as fast as TCP sockets (or consume
about half of the CPU at the same rate). This is interesting for
internal communications between SSL processes and HTTP processes
for example, or simply to avoid allocating source ports on the
loopback.
The tcp_connect_probe() function is still used to probe a dataless
connection, but it is compatible so that's not an issue for now.
Health checks are not yet fully supported since they require a port.
Using the address syntax "fd@<num>", a listener may inherit a file
descriptor that the caller process has already bound and passed as
this number. The fd's socket family is detected using getsockname(),
and the usual initialization is performed through the existing code
for that family, but the socket creation is skipped.
Whether the parent has performed the listen() call or not is not
important as this is detected.
For UNIX sockets, we immediately clear the path after preparing a
socket so that we never remove it in case an abort would happen due
to a late error during startup.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
The "mode", "uid", "gid", "user" and "group" bind options were moved to
proto_uxst as they are unix-specific.
Note that previous versions had a bug here, only the last listener was
updated with the specified settings. However, it almost never happens
that bind lines contain multiple UNIX socket paths so this is not that
much of a problem anyway.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
fdtab[].state was only used to know whether a connection was in progress
or an error was encountered. Instead we now use connection->flags to store
a flag for both. This way, connection management will be able to update the
connection status on I/O.
The destination address is purely a connection thing and not an fd thing.
It's also likely that later the address will be stored into the connection
and linked to by the SI.
struct fdinfo only keeps the pointer to the port range and the local port
for now. All of this also needs to move to the connection but before this
the release of the port range must move from fd_delete() to a new function
dedicated to the connection.
These pointers were used to hold pointers to buffers in the past, but
since we introduced the stream interface, they're no longer used but
they were still sometimes set.
Removing them shrink the struct fdtab from 32 to 24 bytes on 32-bit machines,
and from 52 to 36 bytes on 64-bit machines, which is a significant saving. A
quick tests shows a steady 0.5% performance gain, probably due to the better
cache efficiency.
Commit e164e7a removed get_src/get_dst setting in the stream interfaces but
forgot to set it in proto_tcp. Get the feature back because we need it for
logging, transparent mode, ACLs etc... We now rely on the stream interface
direction to know what syscall to use.
One benefit of doing it this way is that we don't use getsockopt() anymore
on outgoing stream interfaces nor on UNIX sockets.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
The previous sockstream_accept() function uses nothing from sockstream, and
is totally irrelevant to stream interfaces. Move this to the protocols.c
file which handles listeners and protocols, and call it listener_accept().
It now makes much more sense that the code dealing with listen() also handles
accept() and passes it to upper layers.
Managing listeners state is difficult because they have their own state
and can at the same time have theirs dictated by their proxy. The pause
is not done properly, as the proxy code is fiddling with sockets. By
introducing new functions such as pause_listener()/resume_listener(), we
make it a bit more obvious how/when they're supposed to be used. The
listen_proxies() function was also renamed to resume_proxies() since
it's only used for pause/resume.
This patch is the first in a series aiming at getting rid of the maintain_proxies
mess. In the end, proxies should not call enable_listener()/disable_listener()
anymore.
Since unix sockets are supported for bind, the default backlog size was not
enough to accept the traffic. The size is now inherited from the listener
to behave like the tcp listeners.
This also affects the "stats socket" backlog, which is now determined by
"stats maxconn".
There were a lot of snprintf() everywhere in the UNIX bind code. Now we
proceed as for tcp and indicate the socket path at the end between square
brackets. The code is smaller and more readable.
MAXPATHLEN may be used at other places, it's unconvenient to have it
redefined in a few files. Also, since checking it requires including
sys/param.h, some versions of it cause a macro declaration conflict
with MIN/MAX which are defined in tools.h. The solution consists in
including sys/param.h in both files so that we ensure it's loaded
before the macros are defined and MAXPATHLEN is checked.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
Right now we count the incoming connection only once everything has
been allocated. Since we're planning on considering early ACL rules,
we need to count the connection earlier.
The response analyser was not emptied upon creation of a new session. In
fact it was always zero just because last session leaved it in a zero state,
but in case of shared pools this cannot be guaranteed. The net effect is
that it was possible to have some HTTP (or any other) analysers on the
response path of a stats unix socket, which would reject the response.
This fix must be backported to 1.4.
Since the last documentation cleanups, I've found more typos that I kept
in a corner instead of sending you a mail just for one character :)
--
Cyril Bont
Some rarely information are stored in fdtab, making it larger for no
reason (source port ranges, remote address, ...). Such information
lie there because the checks can't find them anywhere else. The goal
will be to move these information to the stream interface once the
checks make use of it.
For now, we move them to an fdinfo array. This simple change might
have improved the cache hit ratio a little bit because a 0.5% of
performance increase has measured.
The stats handler used to store internal states in s->ana_state. Now
we only rely on si->st0 in which we can store as many states as we
have possible outputs. This cleans up the stats code a lot and makes
it more maintainable. It has also reduced code size by a few hundred
bytes.
By default, when data is sent over a socket, both the write timeout and the
read timeout for that socket are refreshed, because we consider that there is
activity on that socket, and we have no other means of guessing if we should
receive data or not.
While this default behaviour is desirable for almost all applications, there
exists a situation where it is desirable to disable it, and only refresh the
read timeout if there are incoming data. This happens on sessions with large
timeouts and low amounts of exchanged data such as telnet session. If the
server suddenly disappears, the output data accumulates in the system's
socket buffers, both timeouts are correctly refreshed, and there is no way
to know the server does not receive them, so we don't timeout. However, when
the underlying protocol always echoes sent data, it would be enough by itself
to detect the issue using the read timeout. Note that this problem does not
happen with more verbose protocols because data won't accumulate long in the
socket buffers.
When this option is set on the frontend, it will disable read timeout updates
on data sent to the client. There probably is little use of this case. When
the option is set on the backend, it will disable read timeout updates on
data sent to the server. Doing so will typically break large HTTP posts from
slow lines, so use it with caution.
We can get rid of the stats analyser by moving all the stats code
to a stream interface applet. Above being cleaner, it provides new
advantages such as the ability to process requests and responses
from the same function and work only with simple state machines.
There's no need for any hijack hack anymore.
The direct advantage for the user are the interactive mode and the
ability to chain several commands delimited by a semi-colon. Now if
the user types "prompt", he gets a prompt from which he can send
as many requests as he wants. All outputs are terminated by a
blank line followed by a new prompt, so this can be used from
external tools too.
The code is not very clean, it needs some rework, but some part
of the dirty parts are due to the remnants of the hijack mode used
in the old functions we call.
The old AN_REQ_STATS_SOCK analyser flag is now unused and has been
removed.
When stream interfaces will embedded applets running as part as their
holding task, we'll need a new callback to process them from the
session processor.
We used to call stream_sock_data_finish() directly at the end of
a session update, but if we want to support non-socket interfaces,
we need to have this function configurable. Now we access it via
->update().
The new tune.bufsize and tune.maxrewrite global directives allow one to
change the buffer size and the maxrewrite size. Right now, setting bufsize
too low will block stats sockets which will not be able to write at all.
An error checking must be added to buffer_write_chunk() so that if it
cannot write its message to an empty buffer, it causes the caller to abort.
The first step towards dynamic buffer size consists in removing
all static definitions of the buffer size. Instead, we store a
buffer's size in itself. Right now they're all preinitialized
to BUFSIZE, but we will change that.
Since the listener is the one indicating what analyser and session
handlers to call, it makes sense that it also sets the task's nice
value. This also helps getting rid of the last trace of the stats
in the proto_uxst file.
The remains of the stats socket code has nothing to do in proto_uxst
anymore and must move to dumpstats. The code is much cleaner and more
structured. It was also an opportunity to rename AN_REQ_UNIX_STATS
as AN_REQ_STATS_SOCK as the stats socket is no longer unix-specific
either.
The last item refering to stats in proto_uxst is the setting of the
task's nice value which should in fact come from the listener.
process_session() is now ready to handle unix stats sockets. This
first step works and old code has not been removed. A cleanup is
required. The stats handler is not unix socket-centric anymore and
should move to dumpstats.c.
Creating a frontend for the global stats socket will help merge
unix sockets management with the other socket management. Since
frontends are huge structs, we only allocate it if required.
The connection establishment was completely handled by backend.c which
normally just handles LB algos. Since it's purely TCP, it must move to
proto_tcp.c. Also, instead of calling it directly, we now call it via
the stream interface, which will later help us unify session handling.
When issuing commands on the unix socket, there's no way to
know if the result is empty or if the command is wrong. This
patch makes invalid command return a help message.
Some stream analysers might become generic enough to be called
for several bits. So we cannot have the analyser bit hard coded
into the analyser itself. Let's make the caller inform the callee.
unix sockets are not attached to a real frontend, so there is
no way to disable/enable the listener depending on the global
session count. For this reason, if the global maxconn is reached
and a unix socket comes in, it will just be ignored and remain
in the poll list, which will call again indefinitely.
So we need to accept then drop incoming unix connections when
the table is full.
This should not happen with clean configurations since the global
maxconn should provide enough room for unix sockets.
If the accept() is done before checking for global.maxconn, we can
accept too many connections and encounter a lack of file descriptors
when trying to connect to the server. This is the cause of the
"cannot get a server socket" message encountered in debug mode
during injections with low timeouts.
While processing the session, we used to resync the FSMs when buffer
flags changed. But since BF_KERN_SPLICING and BF_READ_DONTWAIT were
introduced, sometimes we could resync after they were set, which is
not what we want. This was because there were some old checks left
which did not mask changes with BF_MASK_STATIC before checking.
When the reader does not expect to read lots of data, it can
set BF_READ_DONTWAIT on the request buffer. When it is set,
the stream_sock_read callback will not try to perform multiple
reads, it will return after only one, and clear the flag.
That way, we can immediately return when waiting for an HTTP
request without trying to read again.
On pure request/responses schemes such as monitor-uri or
redirects, this has completely eliminated the EAGAIN occurrences
and the epoll_ctl() calls, resulting in a performance increase of
about 10%. Similar effects should be observed once we support
HTTP keep-alive since we'll immediately disable reads once we
get a full request.
It's sometimes useful at least for statistics to keep a task count.
It's easy to do by forcing the rare task creators to always use the
same functions to create/destroy a task.
The forwarding condition was not very clear. We would only enable
forwarding when send_max is zero, and we would only splice when no
analyser is installed. In fact we want to enable forward when there
is no analyser and we want to splice at soon as there is data to
forward, regardless of the analysers.
In process_session(), we used to re-run through all the evaluation
loop when only the response had changed. Now we carefully check in
this order :
- changes to the stream interfaces (only SI_ST_DIS)
- changes to the request buffer flags
- changes to the response buffer flags
And we branch to the appropriate section. This saves significant
CPU cycles, which is important since process_session() is one of
the major CPU eaters.
The same changes have been applied to uxst_process_session().
All the tasks callbacks had to requeue the task themselves, and update
a global timeout. This was not convenient at all. Now the API has been
simplified. The tasks callbacks only have to update their expire timer,
and return either a pointer to the task or NULL if the task has been
deleted. The scheduler will take care of requeuing the task at the
proper place in the wait queue.
The new "show errors" command sent on a unix socket will dump
all captured request and response errors for all proxies. It is
also possible to bound the log to frontends and backends whose
ID is passed as an optional parameter.
The output provides information about frontend, backend, server,
session ID, source address, error type, and error position along
with a complete dump of the request or response which has caused
the error.
If a new error scratches the one currently being reported, then
the dump is aborted with a warning message, and processing goes
on to next error.
Unix socket processing was still quite buggy. It did not properly
handle interrupted output due to a full response buffer. The fix
mainly consists in not trying to prematurely enable write on the
response buffer, just like the standard session works. This also
gets the unix socket code closer to the standard session code
handling.
Commit 8a5c626e73 introduced the sessions
dump on the unix socket. This implementation is buggy because it may try
to link to the sessions list's head after the last session is removed
with a backref. Also, for the LIST_ISEMPTY test to succeed, we have to
proceed with LIST_INIT after LIST_DEL.
The way the buffers and stream interfaces handled ->to_forward was
really not handy for multiple reasons. Now we've moved its control
to the receive-side of the buffer, which is also responsible for
keeping send_max up to date. This makes more sense as it now becomes
possible to send some pre-formatted data followed by forwarded data.
The following explanation has also been added to buffer.h to clarify
the situation. Right now, tests show that the I/O is behaving extremely
well. Some work will have to be done to adapt existing splice code
though.
/* Note about the buffer structure
The buffer contains two length indicators, one to_forward counter and one
send_max limit. First, it must be understood that the buffer is in fact
split in two parts :
- the visible data (->data, for ->l bytes)
- the invisible data, typically in kernel buffers forwarded directly from
the source stream sock to the destination stream sock (->splice_len
bytes). Those are used only during forward.
In order not to mix data streams, the producer may only feed the invisible
data with data to forward, and only when the visible buffer is empty. The
consumer may not always be able to feed the invisible buffer due to platform
limitations (lack of kernel support).
Conversely, the consumer must always take data from the invisible data first
before ever considering visible data. There is no limit to the size of data
to consume from the invisible buffer, as platform-specific implementations
will rarely leave enough control on this. So any byte fed into the invisible
buffer is expected to reach the destination file descriptor, by any means.
However, it's the consumer's responsibility to ensure that the invisible
data has been entirely consumed before consuming visible data. This must be
reflected by ->splice_len. This is very important as this and only this can
ensure strict ordering of data between buffers.
The producer is responsible for decreasing ->to_forward and increasing
->send_max. The ->to_forward parameter indicates how many bytes may be fed
into either data buffer without waking the parent up. The ->send_max
parameter says how many bytes may be read from the visible buffer. Thus it
may never exceed ->l. This parameter is updated by any buffer_write() as
well as any data forwarded through the visible buffer.
The consumer is responsible for decreasing ->send_max when it sends data
from the visible buffer, and ->splice_len when it sends data from the
invisible buffer.
A real-world example consists in part in an HTTP response waiting in a
buffer to be forwarded. We know the header length (300) and the amount of
data to forward (content-length=9000). The buffer already contains 1000
bytes of data after the 300 bytes of headers. Thus the caller will set
->send_max to 300 indicating that it explicitly wants to send those data,
and set ->to_forward to 9000 (content-length). This value must be normalised
immediately after updating ->to_forward : since there are already 1300 bytes
in the buffer, 300 of which are already counted in ->send_max, and that size
is smaller than ->to_forward, we must update ->send_max to 1300 to flush the
whole buffer, and reduce ->to_forward to 8000. After that, the producer may
try to feed the additional data through the invisible buffer using a
platform-specific method such as splice().
*/
If an analyser sets buf->to_forward to a given value, that many
data will be forwarded between the two stream interfaces attached
to a buffer without waking the task up. The same applies once all
analysers have been released. This saves a large amount of calls
to process_session() and a number of task_dequeue/queue.
By letting the producer tell the consumer there is data to check,
and the consumer tell the producer there is some space left again,
we can cut in half the number of session wakeups.
This is also an important starting point for future splicing support.
Sometimes we don't care about a read timeout, for instance, from the
client when waiting for the server, but we still want the client to
be able to read.
Till now it was done by articially forcing the read timeout to ETERNITY.
But this will cause trouble when we want the low level stream sock to
communicate without waking the session up. So we add a BF_READ_NOEXP
flag to indicate that when the read timeout is to be set, it might
have to be set to ETERNITY.
Since BF_READ_ENA was not used, we replaced this flag.
For keep-alive, line-mode protocols and splicing, we will need to
limit the sender to process a certain amount of bytes. The limit
is automatically set to the buffer size when analysers are detached
from the buffer.
It is now possible to list all known sessions by issuing "show sess"
on the unix stats socket. The format is not much evolved but it is
very useful for debugging.
The doc has been updated to reflect the new keyword.
This is the first step in implementing a session dump tool.
A session dump will need restart points. It will be necessary for
it to get references to sessions which can be moved when the session
dies.
The principle is not that complex : when a session ends, it looks for
any potential back-references. If it finds any, then it moves them to
the next session in the list. The dump function will of course have
to restart from that new point.
Instead of calling a hard-coded function to produce data, let's
reference this function into the buffer and call it from there
when BF_HIJACK is set. This goes in the direction of more generic
session management code.
The listener referenced in the fd was only used to check the
listener state upon session termination. There was no guarantee
that the FD had not been reassigned by the moment it was processed,
so this was a bit racy. Having it in the session is more robust.
The unix protocol handler had not been updated during the last
stream_sock changes. This has been done now. There is still a
lot of duplicated code between session.c and proto_uxst.c due
to the way the session is handled. Session.c relies on the existence
of a frontend while it does not exist here.
It is easier to see the difference between the stats part (placed
in dumpstats.c) and the unix-stream part (in proto_uxst.c).
The hijacking function still needs to be dynamically set into the
response buffer, and some cleanup is still required, then all those
changes should be forward-ported to the HTTP part. Adding support
for new keywords should not cause trouble now.
The accept function must be adapted to the new framework. It is
still broken, and calling it will still result in a segfault. But
this cleanup is needed anyway.
Now the global variable 'sessions' will be a dual-linked list of all
known sessions. The list element is set at the beginning of the session
so that it's easier to follow them all with gdb.
The owner of an fd was initially a task but this was sometimes
casted to a (struct listener *). We'll soon need more types,
so void* is more appropriate.
It's very frequent to require some information about the
reason why a task is running. Some flags have been added
so that a task now knows if it got woken up due to I/O
completion, timeout, etc...
The buffer flags became a big bazaar. Re-arrange them
so that their names are more explicit and so that they
are more easily readable in hex form. Some aggregates
have also been adjusted.
srv_state has been removed from HTTP state machines, and states
have been split in either TCP states or analyzers. For instance,
the TARPIT state has just become a simple analyzer.
New flags have been added to the struct buffer to compensate this.
The high-level stream processors sometimes need to force a disconnection
without touching a file-descriptor (eg: report an error). But if
they touched BF_SHUTW or BF_SHUTR, the file descriptor would not
be closed. Thus, the two SHUT?_NOW flags have been added so that
an application can request a forced close which the stream interface
will be forced to obey.
During this change, a new BF_HIJACK flag was added. It will
be used for data generation, eg during a stats dump. It
prevents the producer on a buffer from sending data into it.
BF_SHUTR_NOW /* the producer must shut down for reads ASAP */
BF_SHUTW_NOW /* the consumer must shut down for writes ASAP */
BF_HIJACK /* the producer is temporarily replaced */
BF_SHUTW_NOW has precedence over BF_HIJACK. BF_HIJACK has
precedence over BF_MAY_FORWARD (so that it does not need it).
New functions buffer_shutr_now(), buffer_shutw_now(), buffer_abort()
are provided to manipulate BF_SHUT* flags.
A new type "stream_interface" has been added to describe both
sides of a buffer. A stream interface has states and error
reporting. The session now has two stream interfaces (one per
side). Each buffer has stream_interface pointers to both
consumer and producer sides.
The server-side file descriptor has moved to its stream interface,
so that even the buffer has access to it.
process_srv() has been split into three parts :
- tcp_get_connection() obtains a connection to the server
- tcp_connection_failed() tests if a previously attempted
connection has succeeded or not.
- process_srv_data() only manages the data phase, and in
this sense should be roughly equivalent to process_cli.
Little code has been removed, and a lot of old code has been
left in comments for now.
It's a shame not to use buffer->wex for connection timeouts since by
definition it cannot be used till the connection is not established.
Using it instead of ->cex also makes the buffer processing more
symmetric.
It is not always convenient to run checks on req->l in functions to
check if a buffer is empty or full. Now the stream_sock functions
set flags BF_EMPTY and BF_FULL according to the buffer contents. Of
course, functions which touch the buffer contents adjust the flags
too.
BF_SHUTR_PENDING and BF_SHUTW_PENDING were poor ideas because
BF_SHUTR is the pending of BF_SHUTW_DONE and BF_SHUTW is the
pending of BF_SHUTR_DONE. Remove those two useless and confusing
"pending" versions and rename buffer_shut{r,w}_* functions.
A new member has been added to the struct session. It keeps a trace
of what block of code performs a close or a shutdown on a socket, and
in what sequence. This is extremely convenient for post-mortem analysis
where flag combinations and states seem impossible. A new ABORT_NOW()
macro has also been added to make the code immediately segfault where
called.
The SV_STANALYZE state was installed on the server side but was really
meant to be processed with the rest of the request on the client side.
It suffered from several issues, mostly related to the way timeouts were
handled while waiting for data.
All known issues related to timeouts during a request - and specifically
a request involving body processing - have been raised and fixed. At this
point, the code is a bit dirty but works fine, so next steps might be
cleanups with an ability to come back to the current state in case of
trouble.
This is a first attempt at separating data processing from the
TCP state machine. Those two states have been replaced with flags
in the session indicating what needs to be analyzed. The corresponding
code is still called before and in lieu of TCP states.
Next change should get rid of the specific SV_STANALYZE which is in
fact a client state.
Then next change should consist in making it possible to analyze
TCP contents while being in CL_STDATA (or CL_STSHUT*).
