In preparation for a later move of all the applet context outside of the
stream interface, we'll need to have access to the applet itself from the
context. Let's have a pointer to it inside the context.
si_prepare_embedded() was used both to attach an applet and to detach
anything from a stream interface. Split it into si_prepare_none() to
detach and si_prepare_applet() to attach an applet.
si->conn->target is now assigned from within these two functions instead
of their respective callers.
The object type was added to "struct appctx". The purpose will be
to identify an appctx when the applet context is detached from the
stream interface. For now, it's still attached, so this patch only
adds the new type and does not replace its use.
Most of the times, the caller of objt_<type>(ptr) will know that <ptr>
is valid and of the correct type (eg: in an "if" condition). Let's provide
an unsafe variant that does not perform the check again for these usages.
The new functions are called "__objt_<type>".
This is to be more consistent with the other functions. The only
reason why these functions used to return a value was to let the
caller adjust polling by itself, but now their only callers were
the si_shutr()/si_shutw() inline functions. Now these functions
do not depend anymore on the connection.
These connection variant of these functions now call
conn_data_stop_recv()/conn_data_stop_send() before returning order
not to require a return code anymore. The applet version does not
need this at all.
These functions induce a lot of ifs everywhere because they consider two
different cases, one which is where the connection exists and has a file
descriptor, and the other one which is the default case where at most an
applet has to be notified.
Let's have them in si_ops and automatically decide which one to use.
The connection shutdown sequence has been slightly simplified, and we
now clear the flags at the end.
Also we remove SHUTR_NOW after a shutw with nolinger, as it's cleaner
not to keep it.
There is a big trouble with the way POST is handled for the admin
stats page. The POST parameters are extracted from some http-request
rules, and if not round they return zero hoping for being called again
when more data passes. This results in the HTTP analyser being called
several times and all the rules prior to the stats being executed
multiple times as well. That includes rewrite rules.
So instead of doing this, we now move all the processing of the stats
into the stats applet.
That way we just set the stats applet in the HTTP analyser when a stats
request is detected, and the applet takes the time it needs to read the
arguments and respond. We could even imagine improving the applet to
support requests larger than a single buffer.
The code was almost only moved and minimally changed. Several new HTTP
states were added to the stats applet to emit headers, redirects and
to read POST. It was necessary to do this because the headers sent
depend on the parsing of the POST request. In the end it's beneficial
because we removed two stream_int_retnclose() calls.
In preparation for moving the POST processing to the applet, we first
add new states to the HTTP I/O handler. Till now st0 was only 0/1 for
start/end. We now replace it with an enum.
We handle "http-request redirect" with a log-format string now, but we
leave "redirect" unaffected.
Note that the control of the special "/" case is move from the runtime
execution to the configuration parsing. If the format rule list is
empty, the build_logline() function does nothing.
We now have the following enums and all related functions return them and
consume them :
enum pat_match_res {
PAT_NOMATCH = 0, /* sample didn't match any pattern */
PAT_MATCH = 3, /* sample matched at least one pattern */
};
enum acl_test_res {
ACL_TEST_FAIL = 0, /* test failed */
ACL_TEST_MISS = 1, /* test may pass with more info */
ACL_TEST_PASS = 3, /* test passed */
};
enum acl_cond_pol {
ACL_COND_NONE, /* no polarity set yet */
ACL_COND_IF, /* positive condition (after 'if') */
ACL_COND_UNLESS, /* negative condition (after 'unless') */
};
It's just in order to avoid doubts when reading some code.
This patch just renames functions, types and enums. No code was changed.
A significant number of files were touched, especially the ACL arrays,
so it is likely that some external patches will not apply anymore.
One important thing is that we had to split ACL_PAT_* into two groups :
- ACL_TEST_{PASS|MISS|FAIL}
- PAT_{MATCH|UNMATCH}
A future patch will enforce enums on all these places to avoid confusion.
This patch just moves code without any change.
The ACL are just the association between sample and pattern. The pattern
contains the match method and the parse method. These two things are
different. This patch cleans the code by splitting it.
This will be used later with maps. Each map will associate an entry with
a sample_storage value.
This patch changes the "parse" prototype and all the parsing methods.
The goal is to associate "struct sample_storage" to each entry of
"struct acl_pattern". Only the "parse" function can add the sample value
into the "struct acl_pattern".
The map feature will need to match acl patterns. This patch extracts
the matching function from the global ACL function "acl_exec_cond".
The code was only moved to its own function, no functional changes were made.
With this split, the pattern indexation can apply to any source. The map
feature needs this functionality because the map cannot be loaded with the
same file format as the ones supported by acl_read_patterns_from_file().
The code was only moved to its own function, no functional changes were made.
If the acl keyword is a "fetch", the dedicated parsing function
"sample_parse_expr()" is used. Otherwise, the acl parsing function
"parse_acl_expr()" is extended to understand the syntax of a series
of converters placed after the "fetch" keyword.
Before this patch, each acl uses a "struct sample_fetch" and executes
it with the "<fetch>->process()" function. Now, the dedicated function
"sample_process()" is called.
These syntax are now avalaible:
acl bad req.hdr(host),lower -m str www
http-request redirect prefix /go-away if bad
acl bad hdr_beg(host),lower www
http-request redirect prefix /go-away if bad
When parsing track-sc* actions in tcp-request rules, we now automatically
compute the track-sc identifier number using %d when displaying an error
message. But the ID has become wrong since we introduced sc0, we continue
to report id+1 in error messages causing some confusion.
No backport is needed.
Add a DRAIN sub-state for a server which
will be shown on the stats page instead of UP if
its effective weight is zero.
Also, log if a server enters or leaves the DRAIN state
as the result of an agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
The column used to report the throttle percentage when a server is in
slowstart is based on the time only. This is wrong, because server weights
in slowstart are updated at most once a second, so the reported value is
wrong at least fo rone second during each step, which means all the time
when using short delays (< 20s).
The second point is that it's disturbing to see a weight < 100% without
any throttle at the end of the period (during the last second), because
the effective weight has not yet been updated.
Instead, we now compute the exact ratio between eweight and uweight and
report it. It's always accurate and describes the value being used instead
of using only the date.
It can be backported to 1.4 though it's not particularly important.
A crash was reported by Igor at owind when changing a server's weight
on the CLI. Lukas Tribus could reproduce a related bug where setting
a server's weight would result in the new weight being multiplied by
the initial one. The two bugs are the same.
The incorrect weight calculation results in the total farm weight being
larger than what was initially allocated, causing the map index to be out
of bounds on some hashes. It's easy to reproduce using "balance url_param"
with a variable param, or with "balance static-rr".
It appears that the calculation is made at many places and is not always
right and not always wrong the same way. Thus, this patch introduces a
new function "server_recalc_eweight()" which is dedicated to this task
of computing ->eweight from many other elements including uweight and
current time (for slowstart), and all users now switch to use this
function.
The patch is a bit large but the code was not trivially fixable in a way
that could guarantee this situation would not occur anymore. The fix is
much more readable and has been verified to work with all algorithms,
with both consistent and map-based hashes, and even with static-rr.
Slowstart was tested as well, just like enable/disable server.
The same bug is very likely present in 1.4 as well, so the patch will
probably need to be backported eventhough it will not apply as-is.
Thanks to Lukas and Igor for the information they provided to reproduce it.
Paramatise the following functions over the check of a server
* set_server_down
* set_server_up
* srv_getinter
* server_status_printf
* set_server_check_status
* set_server_disabled
* set_server_enabled
Generally the server parameter of these functions has been removed.
Where it is still needed it is obtained using check->server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
By paramatising these functions they may act on each of the checks
without further significant modification.
Explanation of the SSP_O_HCHK portion of this change:
* Prior to this patch SSP_O_HCHK serves a single purpose which
is to tell server_status_printf() weather it should print
the details of the check of a server or not.
With the paramatisation that this patch adds there are two cases.
1) Printing the details of the check in which case a
valid check parameter is needed.
2) Not printing the details of the check in which case
the contents check parameter are unused.
In case 1) we could pass SSP_O_HCHK and a valid check and;
In case 2) we could pass !SSP_O_HCHK and any value for check
including NULL.
If NULL is used for case 2) then SSP_O_HCHK becomes supurfulous
and as NULL is used for case 2) SSP_O_HCHK has been removed.
Signed-off-by: Simon Horman <horms@verge.net.au>
When a process with large stick tables is replaced by a new one and remains
present until the last connection finishes, it keeps these data in memory
for nothing since they will never be used anymore by incoming connections,
except during syncing with the new process. This is especially problematic
when dealing with long session protocols such as WebSocket as it becomes
possible to stack many processes and eat a lot of memory.
So the idea here is to know if a table still needs to be synced or not,
and to purge all unused entries once the sync is complete. This means that
after a few hundred milliseconds when everything has been synchronized with
the new process, only a few entries will remain allocated (only the ones
held by sessions during the restart) and all the remaining memory will be
freed.
Note that we carefully do that only after the grace period is expired so as
not to impact a possible proxy that needs to accept a few more connections
before leaving.
Doing this required to add a sync counter to the stick tables, to know how
many peer sync sessions are still in progress in order not to flush the entries
until all synchronizations are completed.
In preparation of more flexibility in the stick counters, make their
number configurable. It still defaults to 3 which is the minimum
accepted value. Changing the value alone is not sufficient to get
more counters, some bitfields still need to be updated and the TCP
actions need to be updated as well, but this update tries to be
easier, which is nice for experimentation purposes.
This function is also called directly from backend.c, so let's stop
building fake args to call it as a sample fetch, and have a lower
layer more generic function instead.
We're having a lot of duplicate code just because of minor variants between
fetch functions that could be dealt with if the functions had the pointer to
the original keyword, so let's pass it as the last argument. An earlier
version used to pass a pointer to the sample_fetch element, but this is not
the best solution for two reasons :
- fetch functions will solely rely on the keyword string
- some other smp_fetch_* users do not have the pointer to the original
keyword and were forced to pass NULL.
So finally we're passing a pointer to the keyword as a const char *, which
perfectly fits the original purpose.
Remove event_accept() in include/proto/proto_http.h and use correct function
name in other two files instead of event_accept().
Signed-off-by: Godbach <nylzhaowei@gmail.com>
It was a bit inconsistent to have gpc start at 0 and sc start at 1,
so make sc start at zero like gpc. No previous release was issued
with sc3 anyway, so no existing setup should be affected.
Some actions were clearly missing to process response headers. This
patch adds a new "http-response" ruleset which provides the following
actions :
- allow : stop evaluating http-response rules
- deny : stop and reject the response with a 502
- add-header : add a header in log-format mode
- set-header : set a header in log-format mode
Since commit cfd97c6f was merged into 1.5-dev14 (BUG/MEDIUM: checks:
prevent TIME_WAITs from appearing also on timeouts), some valid health
checks sometimes used to show some TCP resets. For example, this HTTP
health check sent to a local server :
19:55:15.742818 IP 127.0.0.1.16568 > 127.0.0.1.8000: S 3355859679:3355859679(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:15.742841 IP 127.0.0.1.8000 > 127.0.0.1.16568: S 1060952566:1060952566(0) ack 3355859680 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:15.742863 IP 127.0.0.1.16568 > 127.0.0.1.8000: . ack 1 win 257
19:55:15.745402 IP 127.0.0.1.16568 > 127.0.0.1.8000: P 1:23(22) ack 1 win 257
19:55:15.745488 IP 127.0.0.1.8000 > 127.0.0.1.16568: FP 1:146(145) ack 23 win 257
19:55:15.747109 IP 127.0.0.1.16568 > 127.0.0.1.8000: R 23:23(0) ack 147 win 257
After some discussion with Chris Huang-Leaver, it appeared clear that
what we want is to only send the RST when we have no other choice, which
means when the server has not closed. So we still keep SYN/SYN-ACK/RST
for pure TCP checks, but don't want to see an RST emitted as above when
the server has already sent the FIN.
The solution against this consists in implementing a "drain" function at
the protocol layer, which, when defined, causes as much as possible of
the input socket buffer to be flushed to make recv() return zero so that
we know that the server's FIN was received and ACKed. On Linux, we can make
use of MSG_TRUNC on TCP sockets, which has the benefit of draining everything
at once without even copying data. On other platforms, we read up to one
buffer of data before the close. If recv() manages to get the final zero,
we don't disable lingering. Same for hard errors. Otherwise we do.
In practice, on HTTP health checks we generally find that the close was
pending and is returned upon first recv() call. The network trace becomes
cleaner :
19:55:23.650621 IP 127.0.0.1.16561 > 127.0.0.1.8000: S 3982804816:3982804816(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:23.650644 IP 127.0.0.1.8000 > 127.0.0.1.16561: S 4082139313:4082139313(0) ack 3982804817 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:23.650666 IP 127.0.0.1.16561 > 127.0.0.1.8000: . ack 1 win 257
19:55:23.651615 IP 127.0.0.1.16561 > 127.0.0.1.8000: P 1:23(22) ack 1 win 257
19:55:23.651696 IP 127.0.0.1.8000 > 127.0.0.1.16561: FP 1:146(145) ack 23 win 257
19:55:23.652628 IP 127.0.0.1.16561 > 127.0.0.1.8000: F 23:23(0) ack 147 win 257
19:55:23.652655 IP 127.0.0.1.8000 > 127.0.0.1.16561: . ack 24 win 257
This change should be backported to 1.4 which is where Chris encountered
this issue. The code is different, so probably the tcp_drain() function
will have to be put in the checks only.
The req.hdr and res.hdr fetch methods do not work well on headers which
are allowed to contain commas, such as User-Agent, Date or Expires.
More specifically, full-length matching is impossible if a comma is
present.
This patch introduces 4 new fetch functions which are designed to work
with these full-length headers :
- req.fhdr, req.fhdr_cnt
- res.fhdr, res.fhdr_cnt
These ones do not stop at commas and permit to return full-length header
values.
Since 1.5-dev12 and commit 3bf1b2b8 (MAJOR: channel: stop relying on
BF_FULL to take action), the HTTP parser switched to channel_full()
instead of BF_FULL to decide whether a buffer had enough room to start
parsing a request or response. The problem is that channel_full()
intentionally ignores outgoing data, so a corner case exists where a
large response might still be left in a response buffer with just a
few bytes left (much less than the reserve), enough to accept a second
response past the last data, but not enough to permit the HTTP processor
to add some headers. Since all the processing relies on this space being
available, we can get some random crashes when clients pipeline requests.
The analysis of a core from haproxy configured with 20480 bytes buffers
shows this : with enough "luck", when sending back the response for the
first request, the client is slow, the TCP window is congested, the socket
buffers are full, and haproxy's buffer fills up. We still have 20230 bytes
of response data in a 20480 response buffer. The second request is sent to
the server which returns 214 bytes which fit in the small 250 bytes left
in this buffer. And the buffer arrangement makes it possible to escape all
the controls in http_wait_for_response() :
|<------ response buffer = 20480 bytes ------>|
[ 2/2 | 3 | 4 | 1/2 ]
^ start of circular buffer
1/2 = beginning of previous response (18240)
2/2 = end of previous response (1990)
3 = current response (214)
4 = free space (36)
- channel_full() returns false (20230 bytes are going to leave)
- the response headers does not wrap at the end of the buffer
- the remaining linear room after the headers is larger than the
reserve, because it's the previous response which wraps :
=> response is processed
Header rewriting causes it to reach 260 bytes, 10 bytes larger than what
the buffer could hold. So all computations during header addition are
wrong and lead to the corruption we've observed.
All the conditions are very hard to meet (which explains why it took
almost one year for this bug to show up) and are almost impossible to
reproduce on purpose on a test platform. But the bug is clearly there.
This issue was reported by Dinko Korunic who kindly devoted a lot of
time to provide countless traces and cores, and to experiment with
troubleshooting patches to knock the bug down. Thanks Dinko!
No backport is needed, but all 1.5-dev versions between dev12 and dev18
included must be upgraded. A workaround consists in setting option
forceclose to prevent pipelined requests from being processed.
By properly affecting the flags and values, it becomes easier to add
more tracked counters, for example for experimentation. It also slightly
reduces the code and the number of tests. No counters were added with
this patch.
This patch adds a "scope" box in the statistics page in order to
display only proxies with a name that contains the requested value.
The scope filter is preserved across all clicks on the page.
While ACL args were resolved after all the config was parsed, it was not the
case with sample fetch args because they're almost everywhere now.
The issue is that ACLs now solely rely on sample fetches, so their args
resolving doesn't work anymore. And many fetches involving a server, a
proxy or a userlist don't work at all.
The real issue is that at the bottom layers we have no information about
proxies, line numbers, even ACLs in order to report understandable errors,
and that at the top layers we have no visibility over the locations where
fetches are referenced (think log node).
After failing multiple unsatisfying solutions attempts, we now have a new
concept of args list. The principle is that every proxy has a list head
which contains a number of indications such as the config keyword, the
context where it's used, the file and line number, etc... and a list of
arguments. This list head is of the same type as the elements, so it
serves as a template for adding new elements. This way, it is filled from
top to bottom by the callers with the information they have (eg: line
numbers, ACL name, ...) and the lower layers just have to duplicate it and
add an element when they face an argument they cannot resolve yet.
Then at the end of the configuration parsing, a loop passes over each
proxy's list and resolves all the args in sequence. And this way there is
all necessary information to report verbose errors.
The first immediate benefit is that for the first time we got very precise
location of issues (arg number in a keyword in its context, ...). Second,
in order to do this we had to parse log-format and unique-id-format a bit
earlier, so that was a great opportunity for doing so when the directives
are encountered (unless it's a default section). This way, the recorded
line numbers for these args are the ones of the place where the log format
is declared, not the end of the file.
Userlists report slightly more information now. They're the only remaining
ones in the ACL resolving function.
The acl_expr struct used to hold a pointer to the ACL keyword. But since
we now have all the relevant pointers, we don't need that anymore, we just
need the pointer to the keyword as a string in order to return warnings
and error messages.
So let's change this in order to remove the dependency on the acl_keyword
struct from acl_expr.
During this change, acl_cond_kw_conflicts() used to return a pointer to an
ACL keyword but had to be changed to return a const char* for the same reason.
The ACLs now use the fetch's ->use and ->val to decide upon compatibility
between the place where they are used and where the information are fetched.
The code is capable of reporting warnings about very fine incompatibilities
between certain fetches and an exact usage location, so it is expected that
some new warnings will be emitted on some existing configurations.
Two degrees of detection are provided :
- detecting ACLs that never match
- detecting keywords that are ignored
All tests show that this seems to work well, though bugs are still possible.
Proxy's acl_requires was a copy of all bits taken from ACLs, but we'll
get rid of ACL flags and only rely on sample fetches soon. The proxy's
acl_requires was only used to allocate an HTTP context when needed, and
was even forced in HTTP mode. So better have a flag which exactly says
what it's supposed to be used for.
ACL fetch functions used to directly reference a fetch function. Now
that all ACL fetches have their sample fetches equivalent, we can make
ACLs reference a sample fetch keyword instead.
In order to simplify the code, a sample keyword name may be NULL if it
is the same as the ACL's, which is the most common case.
A minor change appeared, http_auth always expects one argument though
the ACL allowed it to be missing and reported as such afterwards, so
fix the ACL to match this. This is not really a bug.
The file acl.c is a real mess, it both contains functions to parse and
process ACLs, and some sample extraction functions which act on buffers.
Some other payload analysers were arbitrarily dispatched to proto_tcp.c.
So now we're moving all payload-based fetches and ACLs to payload.c
which is capable of extracting data from buffers and rely on everything
that is protocol-independant. That way we can safely inflate this file
and only use the other ones when some fetches are really specific (eg:
HTTP, SSL, ...).
As a result of this cleanup, the following new sample fetches became
available even if they're not really useful :
always_false, always_true, rep_ssl_hello_type, rdp_cookie_cnt,
req_len, req_ssl_hello_type, req_ssl_sni, req_ssl_ver, wait_end
The function 'acl_fetch_nothing' was wrong and never used anywhere so it
was removed.
The "rdp_cookie" sample fetch used to have a mandatory argument while it
was optional in ACLs, which are supposed to iterate over RDP cookies. So
we're making it optional as a fetch too, and it will return the first one.
If a log-format involves some sample fetches that may not be present at
the logging instant, we can now report a warning.
Note that this is done both for log-format and for add-header and carefully
respects the original fetch keyword's capabilities.
Samples fetches were relying on two flags SMP_CAP_REQ/SMP_CAP_RES to describe
whether they were compatible with requests rules or with response rules. This
was never reliable because we need a finer granularity (eg: an HTTP request
method needs to parse an HTTP request, and is available past this point).
Some fetches are also dependant on the context (eg: "hdr" uses request or
response depending where it's involved, causing some abiguity).
In order to solve this, we need to precisely indicate in fetches what they
use, and their users will have to compare with what they have.
So now we have a bunch of bits indicating where the sample is fetched in the
processing chain, with a few variants indicating for some of them if it is
permanent or volatile (eg: an HTTP status is stored into the transaction so
it is permanent, despite being caught in the response contents).
The fetches also have a second mask indicating their validity domain. This one
is computed from a conversion table at registration time, so there is no need
for doing it by hand. This validity domain consists in a bitmask with one bit
set for each usage point in the processing chain. Some provisions were made
for upcoming controls such as connection-based TCP rules which apply on top of
the connection layer but before instantiating the session.
Then everywhere a fetch is used, the bit for the control point is checked in
the fetch's validity domain, and it becomes possible to finely ensure that a
fetch will work or not.
Note that we need these two separate bitfields because some fetches are usable
both in request and response (eg: "hdr", "payload"). So the keyword will have
a "use" field made of a combination of several SMP_USE_* values, which will be
converted into a wider list of SMP_VAL_* flags.
The knowledge of permanent vs dynamic information has disappeared for now, as
it was never used. Later we'll probably reintroduce it differently when
dealing with variables. Its only use at the moment could have been to avoid
caching a dynamic rate measurement, but nothing is cached as of now.
Break out set weight processing code.
This is in preparation for reusing the code.
Also, remove duplicate check in nested if clauses.
{px->lbprm.algo & BE_LB_PROP_DYN) is checked by
the immediate outer if clause, so there is no need
to check it a second time.
Signed-off-by: Simon Horman <horms@verge.net.au>
Commit 2b0108ad accidently got rid of the ability to emit a "-" for
empty log fields. This can happen for captured request and response
cookies, as well as for fetches. Since we don't want to have this done
for headers however, we set the default log method when parsing the
format. It is still possible to force the desired mode using +M/-M.
We now have http_apply_redirect_rule() which does all the redirect-specific
job instead of having this inside http_process_req_common().
Also one of the benefit gained from uniformizing this code is that both
keep-alive and close response do emit the PR-- flags. The fix for the
flags could probably be backported to 1.4 though it's very minor.
The previous function http_perform_redirect() was becoming confusing
so it was renamed http_perform_server_redirect() since it only applies
to server-based redirection.
At the moment, we need trash chunks almost everywhere and the only
correctly implemented one is in the sample code. Let's move this to
the chunks so that all other places can use this allocator.
Additionally, the get_trash_chunk() function now really returns two
different chunks. Previously it used to always overwrite the same
chunk and point it to a different buffer, which was a bit tricky
because it's not obvious that two consecutive results do alias each
other.
The dumpstats code looks like a spaghetti plate. Several functions are
supposed to be able to do several things but rely on complex states to
dispatch the work to independant functions. Most of the HTML output is
performed within the switch/case statements of the whole state machine.
Let's clean this up by adding new functions to emit the data and have
a few more iterators to avoid relying on so complex states.
The new stats dump sequence looks like this for CLI and for HTTP :
cli_io_handler()
-> stats_dump_sess_to_buffer() // "show sess"
-> stats_dump_errors_to_buffer() // "show errors"
-> stats_dump_raw_info_to_buffer() // "show info"
-> stats_dump_raw_info()
-> stats_dump_raw_stat_to_buffer() // "show stat"
-> stats_dump_csv_header()
-> stats_dump_proxy()
-> stats_dump_px_hdr()
-> stats_dump_fe_stats()
-> stats_dump_li_stats()
-> stats_dump_sv_stats()
-> stats_dump_be_stats()
-> stats_dump_px_end()
http_stats_io_handler()
-> stats_http_redir()
-> stats_dump_http() // also emits the HTTP headers
-> stats_dump_html_head() // emits the HTML headers
-> stats_dump_csv_header() // emits the CSV headers (same as above)
-> stats_dump_http_info() // note: ignores non-HTML output
-> stats_dump_proxy() // same as above
-> stats_dump_http_end() // emits HTML trailer
The log-format parser reached a limit making it hard to add new features.
It also suffers from a weak handling of certain incorrect corner cases,
for example "%{foo}" is emitted as a litteral while syntactically it's an
argument to no variable. Also the argument parser had to redo some of the
job with some cases causing minor memory leaks (eg: ignored args).
This work aims at improving the situation so that slightly better reporting
is possible and that it becomes possible to extend the log format. The code
has a few more states but looks significantly simpler. The parser is now
capable of reporting ignored arguments and truncated lines.
stream_int_chk_rcv_conn() did not clear connection flags before updating them. It
is unsure whether this could have caused the stalled transfers that have been
reported since dev15.
In order to avoid such further issues, we now use a simple inline function to do
all the job.
Looking at the assembly code that updt_fd() and alloc/release_spec_entry
produce in the polling loops, it's clear that gcc has to recompute pointers
several times in a row because of limited spare registers. By better
grouping adjacent structure updates, we improve the code size by around
60 bytes in the fast path on x86.
The stick counters were in two distinct sets of struct members,
causing some code to be duplicated. Now we use an array, which
enables some processing to be performed in loops. This allowed
the code to be shrunk by 700 bytes.
Until now it was only possible to use track-sc1/sc2 with "src" which
is the IPv4 source address. Now we can use track-sc1/sc2 with any fetch
as well as any transformation type. It works just like the "stick"
directive.
Samples are automatically converted to the correct types for the table.
Only "tcp-request content" rules may use L7 information, and such information
must already be present when the tracking is set up. For example it becomes
possible to track the IP address passed in the X-Forwarded-For header.
HTTP request processing now also considers tracking from backend rules
because we want to be able to update the counters even when the request
was already parsed and tracked.
Some more controls need to be performed (eg: samples do not distinguish
between L4 and L6).
Sessions using client certs are huge (more than 1 kB) and do not fit
in session cache, or require a huge cache.
In this new implementation sshcachesize set a number of available blocks
instead a number of available sessions.
Each block is large enough (128 bytes) to store a simple session (without
client certs).
Huge sessions will take multiple blocks depending on client certificate size.
Note: some unused code for session sync with remote peers was temporarily
removed.
When the PROXY protocol header is expected and fails, leading to an
abort of the incoming connection, we now emit a log message. If option
dontlognull is set and it was just a port probe, then nothing is logged.
Since the introduction of SSL, it became quite annoying not to get any useful
info in logs about handshake failures. Let's improve reporting for embryonic
sessions by checking a per-connection error code and reporting it into the logs
if an error happens before the session is completely instanciated.
The "dontlognull" option is supported in that if a connection does not talk
before being aborted, nothing will be emitted.
At the moment, only timeouts are considered for SSL and the PROXY protocol,
but next patches will handle more errors.
Commit 0ffde2cc in 1.5-dev13 tried to always disable polling on file
descriptors when errors were encountered. Unfortunately it did not
always succeed in doing so because it relied on detecting polling
changes to disable it. Let's use a dedicated conn_stop_polling()
function that is inconditionally called upon error instead.
This managed to stop a busy loop observed when a health check makes
use of the send-proxy protocol and fails before the connection can
be established.
Commit 24db47e0 tried to improve support for delayed ACK upon connect
but it was incomplete, because checks with the proxy protocol would
always enable polling for data receive and there was no way of
distinguishing data polling and delayed ack.
So we add a distinct delack flag to the connect() function so that
the caller decides whether or not to use a delayed ack regardless
of pending data (eg: when send-proxy is in use). Doing so covers all
combinations of { (check with data), (sendproxy), (smart-connect) }.
Several places got the connection close sequence wrong because it
was not obvious. In practice we always need the same sequence when
aborting, so let's have a common function for this.
New option 'maxcompcpuusage' in global section.
Sets the maximum CPU usage HAProxy can reach before stopping the
compression for new requests or decreasing the compression level of
current requests. It works like 'maxcomprate' but with the Idle.
This patch makes changes in the http_response_forward_body state
machine. It checks if the compress algorithm had consumed data before
swapping the temporary and the input buffer. So it prevents null sized
zlib chunks.
Instead of storing a couple of (int, ptr) in the struct connection
and the struct session, we use a different method : we only store a
pointer to an integer which is stored inside the target object and
which contains a unique type identifier. That way, the pointer allows
us to retrieve the object type (by dereferencing it) and the object's
address (by computing the displacement in the target structure). The
NULL pointer always corresponds to OBJ_TYPE_NONE.
This reduces the size of the connection and session structs. It also
simplifies target assignment and compare.
In order to improve the generated code, we try to put the obj_type
element at the beginning of all the structs (listener, server, proxy,
si_applet), so that the original and target pointers are always equal.
A lot of code was touched by massive replaces, but the changes are not
that important.
Before connections were introduced, it was possible to connect an
external task to a stream interface. However it was left as an
exercise for the brave implementer to find how that ought to be
done.
The feature was broken since the introduction of connections and
was never fixed since due to lack of users. Better remove this dead
code now.
Hijackers were functions designed to inject data into channels in the
distant past. They became unused around 1.3.16, and since there has
not been any user of this mechanism to date, it's uncertain whether
the mechanism still works (and it's not really useful anymore). So
better remove it as well as the pointer it uses in the channel struct.
si_fd() is not used a lot, and breaks builds on OpenBSD 5.2 which
defines this name for its own purpose. It's easy enough to remove
this one-liner function, so let's do it.
ev_sepoll already provides everything needed to manage FD events
by only manipulating the speculative I/O list. Nothing there is
sepoll-specific so move all this to fd.
At the moment sepoll is not 100% event-driven, because a call to fd_set()
on an event which is already being polled will not change its state.
This causes issues with OpenSSL because if some I/O processing is interrupted
after clearing the I/O event (eg: read all data from a socket, can't put it
all into the buffer), then there is no way to call the SSL_read() again once
the buffer releases some space.
The only real solution is to go 100% event-driven. The principle is to use
the spec list as an event cache and that each time an I/O event is reported
by epoll_wait(), this event is automatically scheduled for addition to the
spec list for future calls until the consumer explicitly asks for polling
or stopping.
Doing this is a bit tricky because sepoll used to provide a substantial
number of optimizations such as event merging. These optimizations have
been maintained : a dedicated update list is affected when events change,
but not the event list, so that updates may cancel themselves without any
side effect such as displacing events. A specific case was considered for
handling newly created FDs as soon as they are detected from within the
poll loop. This ensures that their read or write operation will always be
attempted as soon as possible, thus reducing the number of poll loops and
process_session wakeups. This is especially true for newly accepted fds
which immediately perform their first recv() call.
Two new flags were added to the fdtab[] struct to tag the fact that a file
descriptor already exists in the update list. One flag indicates that a
file descriptor is new and has just been created (fdtab[].new) and the other
one indicates that a file descriptor is already referenced by the update list
(fdtab[].updated). Even if the FD state changes during operations or if the
fd is closed and replaced, it's not an issue because the update flag remains
and is easily spotted during list walks. The flag must absolutely reflect the
presence of the fd in the update list in order to avoid overflowing the update
list with more events than there are distinct fds.
Note that this change also recovers the small performance loss introduced
by its connection counter-part and goes even beyond.
This is the first step of a series of changes aiming at making the
polling totally event-driven. This first change consists in only
remembering at the connection level whether an FD was enabled or not,
regardless of the fact it was being polled or cached. From now on, an
EAGAIN will always be considered as a change so that the pollers are
able to manage a cache and to flush it based on such events. One of
the noticeable effect is that conn_fd_handler() is called once more
per session (6 instead of 5 min) but other update functions are less
called.
Note that the performance loss caused by this change at the moment is
quite significant, around 2.5%, but the change is needed to have SSL
working correctly in all situations, even when data were read from the
socket and stored in the invisible cache, waiting for some room in the
channel's buffer.
Keys are copied from samples to stick_table_key. If a key is larger
than the stick_table_key, we have an overflow. In pratice it does not
happen because it requires :
1) a configuration with tune.bufsize larger than BUFSIZE (common)
2) a stick-table configured with keys strictly larger than buffers
3) extraction of data larger than BUFSIZE (eg: using payload())
Points 2 and 3 don't make any sense for a real world configuration. That
said the issue needs be fixed. The solution consists in allocating it the
same size as the global buffer size, just like the samples. This fixes the
issue.
Sample conversions rely on two alternative buffers which were previously
allocated as static bufs of size BUFSIZE. Now they're initialized to the
global buffer size. It was the same for HTTP authentication. Note that it
seems that none of them was prone to any mistake when dealing with the
buffer size, but better stay on the safe side by maintaining the old
assumption that a trash buffer is always "large enough".
We will need to be able to switch server connections on a session and
to keep idle connections. In order to achieve this, the preliminary
requirement is that the connections can survive the session and be
detached from them.
Right now they're still allocated at exactly the same place, so when
there is a session, there are always 2 connections. We could soon
improve on this by allocating the outgoing connection only during a
connect().
This current patch touches a lot of code and intentionally does not
change any functionnality. Performance tests show no regression (even
a very minor improvement). The doc has not yet been updated.
This commit introduces HTTP compression using the zlib library.
http_response_forward_body has been modified to call the compression
functions.
This feature includes 3 algorithms: identity, gzip and deflate:
* identity: this is mostly for debugging, and it was useful for
developping the compression feature. With Content-Length in input, it
is making each chunk with the data available in the current buffer.
With chunks in input, it is rechunking, the output chunks will be
bigger or smaller depending of the size of the input chunk and the
size of the buffer. Identity does not apply any change on data.
* gzip: same as identity, but applying a gzip compression. The data
are deflated using the Z_NO_FLUSH flag in zlib. When there is no more
data in the input buffer, it flushes the data in the output buffer
(Z_SYNC_FLUSH). At the end of data, when it receives the last chunk in
input, or when there is no more data to read, it writes the end of
data with Z_FINISH and the ending chunk.
* deflate: same as gzip, but with deflate algorithm and zlib format.
Note that this algorithm has ambiguous support on many browsers and
no support at all from recent ones. It is strongly recommended not
to use it for anything else than experimentation.
You can't choose the compression ratio at the moment, it will be set to
Z_BEST_SPEED (1), as tests have shown very little benefit in terms of
compression ration when going above for HTML contents, at the cost of
a massive CPU impact.
Compression will be activated depending of the Accept-Encoding request
header. With identity, it does not take care of that header.
To build HAProxy with zlib support, use USE_ZLIB=1 in the make
parameters.
This work was initially started by David Du Colombier at Exceliance.
Most calls to channel_forward() are performed with short byte counts and
are already optimized in channel_forward() taking just a few instructions.
Thus it's a waste of CPU cycles to call a function for this, let's just
inline the short byte count case and fall back to the common one for
remaining situations.
Doing so has increased the chunked encoding parser's performance by 12% !
ACL and sample fetches use args list and it is really not convenient to
check for null args everywhere. Now for empty args we pass a constant
list of end of lists. It will allow us to remove many useless checks.
This field was used to trace precisely where a session was terminated
but it did not survive code rearchitecture and was not used at all
anymore. Let's get rid of it.
With this commit, we now separate the channel from the buffer. This will
allow us to replace buffers on the fly without touching the channel. Since
nobody is supposed to keep a reference to a buffer anymore, doing so is not
a problem and will also permit some copy-less data manipulation.
Interestingly, these changes have shown a 2% performance increase on some
workloads, probably due to a better cache placement of data.
These two new log-format tags report the SSL protocol version (%sslv) and the
SSL ciphers (%sslc) used for the connection with the client. For instance, to
append these information just after the client's IP/port address information
on an HTTP log line, use the following configuration :
log-format %Ci:%Cp\ %sslv:%sslc\ [%t]\ %ft\ %b/%s\ %Tq/%Tw/%Tc/%Tr/%Tt\ %st\ %B\ %cc\ \ %cs\ %tsc\ %ac/%fc/%bc/%sc/%rc\ %sq/%bq\ %hr\ %hs\ %{+Q}r
It will report a line such as the following one :
Oct 12 20:47:30 haproxy[9643]: 127.0.0.1:43602 TLSv1:AES-SHA [12/Oct/2012:20:47:30.303] stick2~ stick2/s1 7/0/12/0/19 200 145 - - ---- 0/0/0/0/0 0/0 "GET /?t=0 HTTP/1.0"
When we start logging SSL information, we need the SSL struct to be
present even past the conn_xprt_close() call. In order to achieve this,
we should use refcounting on the connection and the transport layer. At
the moment it's not worth using plain refcounting as only the logs require
this, so instead of real refcounting we just use a flag which will be set
by the log subsystem when SSL data need to be logged.
What happens then is that the xprt->close() call is ignored and the
transport layer is closed again during session_free(), after the log
line is emitted.
When calling conn_xprt_close(), we always clear the transport pointer
so that all transport layers leave the connection in the same state after
a close. This will also make it safer and cheaper to call conn_xprt_close()
multiple times if needed.
Just like with the "bind" lines, we'll switch the "server" line
parsing to keyword registration. The code is essentially the same
as for bind keywords, with minor changes such as support for the
default-server keywords and support for variable argument count.
This callback sends a PROXY protocol line on the outgoing connection,
with the local and remote endpoint information. This is used for local
connections (eg: health checks) where the other end needs to have a
valid address and no connection is relayed.
It was previously in frontend.c but there is no reason for this anymore
considering that all the information involved is in the connection itself
only. Theorically this should be in the socket layer but we don't have
this yet.
We absolutely want to disable FD polling after an error is detected,
otherwise the data layer has to do it and it's far from being obvious
at these layers.
The way we did it was a bit tricky in conn_update_*_polling and
conn_*_polling_changes. However it has almost no impact on performance
and code size both for the fast and slow path.
We'll now be able to remove some flag updates in the stream interface.
The connection flags have progressively been added one after the other
and were not very well organized. Some of them are often used together
and a number of operations are performed on the DATA/SOCK ENA/POL flags.
Thus, they have been reorganized so that flags that work together are
close to each other (allows immediate operands on ARM) and that polling
changes can be detected with fewer operations using a simple shift and
xor. The handshakes are now the last ones so that it will be easier to
add new ones after without risking a collision. All activity-related
flags are also grouped together.
The generic data-layer init callback is now used after the transport
layer is complete and before calling the data layer recv/send callbacks.
This allows the session to switch from the embryonic session data layer
to the complete stream interface data layer, by making conn_session_complete()
the data layer's init callback.
It sill looks awkwards that the init() callback must be used opon error,
but except by adding yet another one, it does not seem to be mergeable
into another function (eg: it should probably not be merged with ->wake
to avoid unneeded calls during the handshake, though semantically that
would make sense).
Instead of calling conn_notify_si() from the connection handler, we
now call data->wake(), which will allow us to use a different callback
with health checks.
Note that we still rely on a flag in order to decide whether or not
to call this function. The reason is that with embryonic sessions,
the callback is already initialized to si_conn_cb without the flag,
and we can't call the SI notify function in the leave path before
the stream interface is initialized.
This issue should be addressed by involving a different data_cb for
embryonic sessions and for stream interfaces, that would be changed
during session_complete() for the final data_cb.
Now conn->data will designate the data layer which is the client for
the transport layer. In practice it's the stream interface and will
soon also be the health checks.
While working on the changes required to make the health checks use the
new connections, it started to become obvious that some naming was not
logical at all in the connections. Specifically, it is not logical to
call the "data layer" the layer which is in charge for all the handshake
and which does not yet provide a data layer once established until a
session has allocated all the required buffers.
In fact, it's more a transport layer, which makes much more sense. The
transport layer offers a medium on which data can transit, and it offers
the functions to move these data when the upper layer requests this. And
it is the upper layer which iterates over the transport layer's functions
to move data which should be called the data layer.
The use case where it's obvious is with embryonic sessions : an incoming
SSL connection is accepted. Only the connection is allocated, not the
buffers nor stream interface, etc... The connection handles the SSL
handshake by itself. Once this handshake is complete, we can't use the
data functions because the buffers and stream interface are not there
yet. Hence we have to first call a specific function to complete the
session initialization, after which we'll be able to use the data
functions. This clearly proves that SSL here is only a transport layer
and that the stream interface constitutes the data layer.
A similar change will be performed to rename app_cb => data, but the
two could not be in the same commit for obvious reasons.
It removes dependencies with futex or mutex but ssl performances decrease
using nbproc > 1 because switching process force session renegotiation.
This can be useful on small systems which never intend to run in multi-process
mode.
We don't needa to lock the memory when there is a single process. This can
make a difference on small systems where locking is much more expensive than
just a test.
This will be needed to find the stream interface from the connection
once they're detached, but in the more immediate term, we'll need this
for health checks since they don't use a stream interface.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
When an unknown "bind" keyword is detected, dump the list of all
registered keywords. Unsupported default alternatives are also reported
as "not supported".
Registering new SSL bind keywords was not particularly handy as it required
many #ifdef in cfgparse.c. Now the code has moved to ssl_sock.c which calls
a register function for all the keywords.
Error reporting was also improved by this move, because the called functions
build an error message using memprintf(), which can span multiple lines if
needed, and each of these errors will be displayed indented in the context of
the bind line being processed. This is important when dealing with certificate
directories which can report multiple errors.
With the arrival of SSL, the "bind" keyword has received even more options,
all of which are processed in cfgparse in a cumbersome way. So it's time to
let modules register their own bind options. This is done very similarly to
the ACLs with a small difference in that we make the difference between an
unknown option and a known, unimplemented option.
Some settings need to be merged per-bind config line and are not necessarily
SSL-specific. It becomes quite inconvenient to have this ssl_conf SSL-specific,
so let's replace it with something more generic.
A side effect of this change is that the "ssl" keyword on "bind" lines is now
just a boolean and that "crt" is needed to designate certificate files or
directories.
Note that much refcounting was needed to have the free() work correctly due to
the number of cert aliases which can make a context be shared by multiple names.
SSL config holds many parameters which are per bind line and not per
listener. Let's use a per-bind line config instead of having it
replicated for each listener.
At the moment we only do this for the SSL part but this should probably
evolved to handle more of the configuration and maybe even the state per
bind line.
This SSL session cache was developped at Exceliance and is the same that
was proposed for stunnel and stud. It makes use of a shared memory area
between the processes so that sessions can be handled by any process. It
is only useful when haproxy runs with nbproc > 1, but it does not hurt
performance at all with nbproc = 1. The aim is to totally replace OpenSSL's
internal cache.
The cache is optimized for Linux >= 2.6 and specifically for x86 platforms.
On Linux/x86, it makes use of futexes for inter-process locking, with some
x86 assembly for the locked instructions. On other architectures, GCC
builtins are used instead, which are available starting from gcc 4.1.
On other operating systems, the locks fall back to pthread mutexes so
libpthread is automatically linked. It is not recommended since pthreads
are much slower than futexes. The lib is only linked if SSL is enabled.
CVE-2009-3555 suggests that client-initiated renegociation should be
prevented in the middle of data. The workaround here consists in having
the SSL layer notify our callback about a handshake occurring, which in
turn causes the connection to be marked in the error state if it was
already considered established (which means if a previous handshake was
completed). The result is that the connection with the client is immediately
aborted and any pending data are dropped.
This data layer supports socket-to-buffer and buffer-to-socket operations.
No sock-to-pipe nor pipe-to-sock functions are provided, since splicing does
not provide any benefit with data transformation. At best it could save a
memcpy() and avoid keeping a buffer allocated but that does not seem very
useful.
An init function and a close function are provided because the SSL context
needs to be allocated/freed.
A data-layer shutw() function is also provided because upon successful
shutdown, we want to store the SSL context in the cache in order to reuse
it for future connections and avoid a new key generation.
The handshake function is directly called from the connection handler.
At this point it is not certain whether this will remain this way or
if a new ->handshake callback will be added to the data layer so that
the connection handler doesn't care about SSL.
The sock-to-buf and buf-to-sock functions are all capable of enabling
the SSL handshake at any time. This also implies polling in the opposite
direction to what was expected. The upper layers must take that into
account (it is OK right now with the stream interface).
It appears that fd.h includes a number of unneeded files and was
included from standard.h, and as such served as an intermediary
to provide almost everything to everyone.
By removing its useless includes, a long dependency chain broke
but could easily be fixed.
Polling flags were set for data and sock layer, but while this does make
sense for the ENA flag, it does not for the POL flag which translates the
detection of an EAGAIN condition. So now we remove the {DATA,SOCK}_POL*
flags and instead introduce two new layer-independant flags (WANT_RD and
WANT_WR). These flags are only set when an EAGAIN is encountered so that
polling can be enabled.
In order for these flags to have any meaning they are not persistent and
have to be cleared by the connection handler before calling the I/O and
data callbacks. For this reason, changes detection has been slightly
improved. Instead of comparing the WANT_* flags with CURR_*_POL, we only
check if the ENA status changes, or if the polling appears, since we don't
want to detect the useless poll to ena transition. Tests show that this
has eliminated one useless call to __fd_clr().
Finally the conn_set_polling() function which was becoming complex and
required complex operations from the caller was split in two and replaced
its two only callers (conn_update_data_polling and conn_update_sock_polling).
The two functions are now much smaller due to the less complex conditions.
Note that it would be possible to re-merge them and only pass a mask but
this does not appear much interesting.
The PROXY protocol is now decoded in the connection before other
handshakes. This means that it may be extracted from a TCP stream
before SSL is decoded from this stream.
When an incoming connection request is accepted, a connection
structure is needed to store its state. However we don't want to
fully initialize a session until the data layer is about to be
ready.
As long as the connection is physically stored into the session,
it's not easy to split both allocations.
As such, we only initialize the minimum requirements of a session,
which results in what we call an embryonic session. Then once the
data layer is ready, we can complete the function's initialization.
Doing so avoids buffers allocation and ensures that a session only
sees ready connections.
The frontend's client timeout is used as the handshake timeout. It
is likely that another timeout will be used in the future.
SSL need to initialize the data layer before proceeding with data. At
the moment, this data layer is automatically initialized from itself,
which will not be possible once we extract connection from sessions
since we'll only create the data layer once the handshake is finished.
So let's have the application layer initialize the data layer before
using it.
Make it more obvious that this function does not depend on any knowledge
of the session. This is important to plan for TCP rules that can run on
connection without any initialized session yet.
The last uses of the stream interfaces were in tcp_connect_server() and
could easily and more appropriately be moved to its callers, si_connect()
and connect_server(), making a lot more sense.
Now the function should theorically be usable for health checks.
It also appears more obvious that the file is split into two distinct
parts :
- the protocol layer used at the connection level
- the tcp analysers executing tcp-* rules and their samples/acls.
We need to have the source and destination addresses in the connection.
They were lying in the stream interface so let's move them. The flags
SI_FL_FROM_SET and SI_FL_TO_SET have been moved as well.
It's worth noting that tcp_connect_server() almost does not use the
stream interface anymore except for a few flags.
It has been identified that once we detach the connection from the SI,
it will probably be needed to keep a copy of the server-side addresses
in the SI just for logging purposes. This has not been implemented right
now though.
This is a massive rename of most functions which should make use of the
word "channel" instead of the word "buffer" in their names.
In concerns the following ones (new names) :
unsigned long long channel_forward(struct channel *buf, unsigned long long bytes);
static inline void channel_init(struct channel *buf)
static inline int channel_input_closed(struct channel *buf)
static inline int channel_output_closed(struct channel *buf)
static inline void channel_check_timeouts(struct channel *b)
static inline void channel_erase(struct channel *buf)
static inline void channel_shutr_now(struct channel *buf)
static inline void channel_shutw_now(struct channel *buf)
static inline void channel_abort(struct channel *buf)
static inline void channel_stop_hijacker(struct channel *buf)
static inline void channel_auto_connect(struct channel *buf)
static inline void channel_dont_connect(struct channel *buf)
static inline void channel_auto_close(struct channel *buf)
static inline void channel_dont_close(struct channel *buf)
static inline void channel_auto_read(struct channel *buf)
static inline void channel_dont_read(struct channel *buf)
unsigned long long channel_forward(struct channel *buf, unsigned long long bytes)
Some functions provided by channel.[ch] have kept their "buffer" name because
they are really designed to act on the buffer according to some information
gathered from the channel. They have been moved together to the same place in
the file for better readability but they were not changed at all.
The "buffer" memory pool was also renamed "channel".
Get rid of these confusing BF_* flags. Now channel naming should clearly
be used everywhere appropriate.
No code was changed, only a renaming was performed. The comments about
channel operations was updated.
These functions do not depend on the channel flags anymore thus they're
much better suited to be used on plain buffers. Move them from channel
to buffer.
This is similar to the recent removal of BF_OUT_EMPTY. This flag was very
problematic because it relies on permanently changing information such as the
to_forward value, so it had to be updated upon every change to the buffers.
Previous patch already got rid of its users.
One part of the change is sensible : the flag was also part of BF_MASK_STATIC,
which is used by process_session() to rescan all analysers in case the flag's
status changes. At first glance, none of the analysers seems to change its
mind base on this flag when it is subject to change, so it seems fine not to
add variation checks here. Otherwise it's possible that checking the buffer's
input and output is more reliable than checking the flag's replacement.
This flag was very problematic because it was composite in that both changes
to the pipe or to the buffer had to cause this flag to be updated, which is
not always simple (eg: there may not even be a channel attached to a buffer
at all).
There were not that many users of this flags, mostly setters. So the flag got
replaced with a macro which reports whether the channel is empty or not, by
checking both the pipe and the buffer.
One part of the change is sensible : the flag was also part of BF_MASK_STATIC,
which is used by process_session() to rescan all analysers in case the flag's
status changes. At first glance, none of the analysers seems to change its
mind base on this flag when it is subject to change, so it seems fine not to
add variation checks here. Otherwise it's possible that checking the buffer's
output size is more useful than checking the flag's replacement.
Some parts of the sock_ops structure were only used by the stream
interface and have been moved into si_ops. Some of them were callbacks
to the stream interface from the connection and have been moved into
app_cp as they're the application seen from the connection (later,
health-checks will need to use them). The rest has moved to data_ops.
Normally at this point the connection could live without knowing about
stream interfaces at all.
Similar to what was done on the receive path, the data layer now provides
only an snd_buf() callback that is iterated over by the stream interface's
si_conn_send_loop() function.
The data layer now has no knowledge about channels nor stream interfaces.
The splice() code still need to be ported as it currently is disabled.
The recv function is now generic and is usable to iterate any connection-to-buf
reading function from a stream interface. So let's move it to stream-interface.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
At the moment, the struct is still embedded into the struct channel, but
all the functions have been updated to use struct buffer only when possible,
otherwise struct channel. Some functions would likely need to be splitted
between a buffer-layer primitive and a channel-layer function.
Later the buffer should become a pointer in the struct buffer, but doing so
requires a few changes to the buffer allocation calls.
This is a massive rename. We'll then split channel and buffer.
This change needs a lot of cleanups. At many locations, the parameter
or variable is still called "buf" which will become ambiguous. Also,
the "struct channel" is still defined in buffers.h.
This function is used by the data layer when a zero has been read over a
connection. At the moment it only handles sockets and nothing else. Once
the complete split is done between buffers and stream interfaces, it should
become possible to work regardless on the connection type.
The connection send() callback is supposed to be generic for a
stream-interface, and consists in calling the lower layer snd_buf
function. Move this function to the stream interface and remove
the sock-raw and sock-ssl clones.
This callback is used to send data from the buffer to the socket. It is
the old write_loop() call of the data layer which is used both by the
->write() callback and the ->chk_snd() function. The reason for having
it as a pointer is that it's the only remaining part which causes the
write and chk_snd() functions to be different between raw and ssl.
sock_raw and sock_ssl use a pretty generic chk_rcv function, so let's move
this function to the stream_interface and remove specific functions. Later
we might have a single chk_rcv function.
We need to have a generic function to be called by upper layers when buffer
flags have been updated (the si->update function). At the moment, both sock_raw
and sock_ssl had their own which basically was a copy-paste. Since these
functions are only used to update stream interface flags, it is logical to
have them handled by the stream interface code.
This allowed us to remove the stream_interface-specific update function from
sock_raw and sock_ssl which now use the generic code.
The stream_sock_update_conn callback has also been more appropriately renamed
conn_notify_si() since it's meant to be called by lower layers to notify the
SI and possibly upper layers about incoming changes.
This is a second attempt at getting rid of FD_WAIT_*. Now the situation is
much better since native I/O handlers can directly manipulate the FD using
fd_{poll|want|stop}_* and the connection handlers manipulate connection-level
flags using the conn_{data|sock}_* equivalent.
Proceeding this way ensures that the connection flags always reflect the
reality even after data<->handshake switches.
Now the connection handler, the handshake callbacks and the I/O callbacks
make use of the connection-layer polling functions to enable or disable
polling on a file descriptor.
Some changes still need to be done to avoid using the FD_WAIT_* constants.
The conflicts we're facing with polling is that handshake handlers have
precedence over data handlers and may change the polling requirements
regardless of what is expected by the data layer. This causes issues
such as missed events.
The real need is to have three polling levels :
- the "current" one, which is effective at any moment
- the data one, which reflects what the data layer asks for
- the sock one, which reflects what the socket layer asks for
Depending on whether a handshake is in progress or not, either one of the
last two will replace the current one, and the change will be propagated
to the lower layers.
At the moment, the shutdown status is not considered, and only handshakes
are used to decide which layer to chose. This will probably change.
The old EV_FD_SET() macro was confusing, as it would enable receipt but there
was no way to indicate that EAGAIN was received, hence the recently added
FD_WAIT_* flags. They're not enough as we're still facing a conflict between
EV_FD_* and FD_WAIT_*. So let's offer I/O functions what they need to explicitly
request polling.
These functions have a more explicity meaning and will offer provisions
for explicit polling.
EV_FD_ISSET() has been left for now as it is still in use in checks.
Up to now, we had to use a shutr/shutw interface per data layer, which
basically means 3 distinct functions when we include SSL :
- generic stream_interface
- sock_raw
- sock_ssl
With this change, the code located in the stream_interface manages all the
stream_interface and buffer updates, and calls the data layer hooks when
needed.
At the moment, the socket layer hook had been implicitly considered as
being a regular socket, so the si_shut*() functions call the normal
shutdown() and EV_FD_CLR() functions on the fd if a socket layer is
defined. This may change in the future. The stream_int_shut*()
functions don't call EV_FD_CLR() so that they can later be embedded
in lower layers.
Thus, the si->data->shutr() is not called anymore and si->data->shutw()
is called to close the data layer only (eg: only for SSL).
Proceeding like this is very important because it's the only way to be
able not to rely on these functions when called from the connection
handlers, and call the data layers' instead.
These primitives were initially introduced so that callers were able to
conditionally set/disable polling on a file descriptor and check in return
what the state was. It's been long since we last had an "if" on this, and
all pollers' functions were the same for cond_* and their systematic
counter parts, except that this required a check and a specific return
value that are not always necessary.
So let's simplify the FD API by removing this now unused distinction and
by making all specific functions return void.
The sock_ops I/O callbacks made use of an FD till now. This has become
inappropriate and the struct connection is much more useful. It also
fixes the race condition introduced by previous change.
The socket data layer code must only focus on moving data between a
socket and a buffer. We need a special stream interface handler to
update the stream interface and the file descriptor status.
At the moment the code works but suffers from a race condition caused
by its API : the read/write callbacks still make use of the fd instead
of using the connection. And when a double shutdown is performed, a call
to ->write() after ->read() processed an error results in dereferencing
a NULL fdtab[]->owner. This is only a temporary issue which doesn't need
to be fixed now since this will automatically go away when the functions
change to use the connection instead.
Use a single tcp_connect_probe() instead of tcp_connect_write() and
tcp_connect_read(). We call this one only when no data layer function
have been processed, so this is a fallback to test for completion of
a connection attempt.
With this done, we don't have the need for any direct I/O callback
anymore.
The function still relies on ->write() to wake the stream interface up,
so it's not finished.
This handshake handler must be independant, so move it away from
proto_tcp. It has a dedicated connection flag. It is tested before
I/O handlers and automatically removes the CO_FL_WAIT_L4_CONN flag
upon success.
It also sets the BF_WRITE_NULL flag on the stream interface and
stops the SI timeout. However it does not perform the task_wakeup(),
and relies on the data handler to do so for now. The SI wakeup will
have to be moved elsewhere anyway.
This is used to enter values for stick tables. The most likely usage
is to set gpc0 for a specific IP address in order to block traffic
for abusers without having to reload. Since all data types are
supported, other usages are possible (eg: replace a users's assigned
server).
Source addresses of non-TCP families were not correctly handled by
tcp_src_to_stktable_key() as it forgot to return NULL and instead left
the previous value in the stick-table buffer.
This bug is 1.5-specific and was introduced by commit 4f92d320 in 1.5-dev6
so it does not need any backport.
Commit 13e66da introduced b_rew() but passes -adv which is an unsigned
quantity on 64-bit platforms, causing the buffer to advance in the wrong
direction.
No backport is needed.
When the target is a client, it will be convenient to have a pointer to the
original listener so that we can retrieve some configuration information at
the stream interface level.
This function will be called later when splitting the shutdown in two
steps. It will be needed by SSL and for remote socket operations to
release unused contexts.
The state and the private pointer are not specific to the applets, since SSL
will require exactly both of them. Move them to the connection layer now and
rename them. We also now ensure that both are NULL on first call.
We start to move everything needed to manage a connection to a special
entity "struct connection". We have the data layer operations and the
control operations there. We'll also have more info in the future such
as file descriptors and applet contexts, so that in the end it becomes
detachable from the stream interface, which will allow connections to
be reused between sessions.
For now on, we start with minimal changes.
Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
Similarly to the previous patch, we don't need the socket-layer functions
outside of stream_interface. They could even move to a file dedicated to
applets, though that does not seem particularly useful at the moment.
Commit e164e7a removed get_src/get_dst setting in the stream interfaces but
forgot to set it in proto_tcp. Get the feature back because we need it for
logging, transparent mode, ACLs etc... We now rely on the stream interface
direction to know what syscall to use.
One benefit of doing it this way is that we don't use getsockopt() anymore
on outgoing stream interfaces nor on UNIX sockets.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
There is no more reason for the realign function being HTTP specific,
it only operates on a buffer now. Let's move it to buffers.c instead.
It's likely that buffer_bounce_realign is broken (not used), this will
have to be inspected. The function is worth rewriting as it can be
cheaper than buffer_slow_realign() to realign large wrapping buffers.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
The previous sockstream_accept() function uses nothing from sockstream, and
is totally irrelevant to stream interfaces. Move this to the protocols.c
file which handles listeners and protocols, and call it listener_accept().
It now makes much more sense that the code dealing with listen() also handles
accept() and passes it to upper layers.
This is mainly a massive renaming in the code to get it in line with the
calling convention. Next patch will rename a few files to complete this
operation.
All parsing errors were known but impossible to return. Now by making use
of memprintf(), we're able to build meaningful error messages that the
caller can display.
HTTP header fetch is now done using smp_fetch_hdr() for both ACLs and
patterns. This one also supports an occurrence number, making it possible
to specify explicit occurrences for ACLs and patterns.
Patterns were using a bitmask to indicate if request or response was desired
in fetch functions and keywords. ACLs were using a bitmask in fetch keywords
and a single bit in fetch functions. ACLs were also using an ACL_PARTIAL bit
in fetch functions indicating that a non-final fetch was performed, which was
an abuse of the existing direction flag.
The change now consists in using :
- a capabilities field for fetch keywords => SMP_CAP_REQ/RES to indicate
if a keyword supports requests, responses, both, etc...
- an option field for fetch functions to indicate what the caller expects
(request/response, final/non-final)
The ACL_PARTIAL bit was reversed to get SMP_OPT_FINAL as it's more explicit
to know we're working on a final buffer than on a non-final one.
ACL_DIR_* were removed, as well as PATTERN_FETCH_*. L4 fetches were improved
to support being called on responses too since they're still available.
The <dir> field of all fetch functions was changed to <opt> which is now
unsigned.
The patch is large but mostly made of cosmetic changes to accomodate this, as
almost no logic change happened.
Having the args everywhere will make it easier to share fetch functions
between patterns and ACLs. The only place where we could have needed
the expr was in the http_prefetch function which can do well without.
Previously, both pattern, backend and persist_rdp_cookie would build fake
ACL expressions to fetch an RDP cookie by calling acl_fetch_rdp_cookie().
Now we switch roles. The RDP cookie fetch function is provided as a sample
fetch function that all others rely on, including ACL. The code is exactly
the same, only the args handling moved from expr->args to args. The code
was moved to proto_tcp.c, but probably that a dedicated file would be more
suited to content handling.
This change is pretty minor. Struct pattern is only used for
pattern_process() now so changing it to use the common type is
quite obvious. It's worth noting that the last argument of
pattern_process() is never used so the function is self-sufficient.
Note that pattern_process() does not initialize the pattern at all
before calling fetch->process(), and that minimal initialization
will be required when we later change the argument for the sample.
These ones were either unused or improperly used. Some integers were marked
read-only, which does not make much sense. Buffers are not read-only, they're
"constant" in that they must be kept intact after any possible change.
This one is not needed anymore as we can return the data and its type in the
sample provided by the caller. ACLs now always return the proper type. BOOL
is already returned when the result is expected to be processed as a boolean.
temp_pattern has been unexported now.
This flag was used to force a boolean match even if there was no pattern
to match. It was used only by http_auth() and designed only for this one.
It's easier and cleaner to make the fetch function perform the test and
report the boolean result as a few other functions already do. It simplifies
the acl_exec_cond() logic and will help merging ACLs and patterns.
We don't need the pattern-specific args parsers anymore, make use of the
common parser instead. We still need to improve this by adding a validation
function to report abnormal argument values or combinations. We don't report
precise parsing errors yet but this was not previously done either.
arg_i was almost unused, and since we migrated to use struct arg everywhere,
the rare cases where arg_i was needed could be replaced by switching to
arg->type = ARGT_STOP.
make_arg_list() builds an array of typed arguments with their values,
that the caller describes how to parse. This will be used to support
multiple arguments for ACLs and patterns, which is currently problematic
and prevents ACLs and patterns from being merged. Up to 7 arguments types
may be enumerated in a single 32-bit word, including their number of
mandatory parts.
At the moment, these files are not used yet, they're only built. Note that
the 4-bit encoding for the type has left only one unused type!
This is more convenient and efficient than buf->p = b_ptr(buf, n);
It simply advances the buffer's pointer by <n> and trasfers that
amount of bytes from <in> to <out>. The BF_OUT_EMPTY flag is updated
accordingly.
A few occurrences of such computations in buffers.c and stream_sock.c
were updated to use b_adv(), which resulted in a small code shrink.
buffer_wrap_add was convenient for the migration but is not handy at all.
Let's have new wrappers that report input begin/end and output begin/end
instead.
It looks like we'll also need a b_adv(ofs) to advance a buffer's pointer.
buffer_ignore may only be used when the output of a buffer is empty,
but it's not granted it is always the case when sending HTTP error
responses. Better use buffer_cut_tail() instead, and use buffer_ignore
only on non-wrapping data.
The buffer's pointer <lr> was only used by HTTP parsers which also use a
struct http_msg to keep track of the parser's state. We've reached a point
where it makes no sense to keep ->lr in the buffer, as the split between
buffer and msg is only arbitrary for historical reasons.
This change ensures that touching buffers will not impact HTTP messages
anymore, making the buffers more content-agnostic. However, it becomes
very important not to forget to update msg->next when some data get
forwarded or moved (and in general each time buf->p is updated).
The new pointer in http_msg becomes relative to buffer->p so that
parsing multiple messages becomes easier. It is possible that at one
point ->som and ->next will be merged.
Note: http_parse_reqline() and http_parse_stsline() have been temporarily
modified to know the message starting point in the buffer (->p).
This change gets rid of buf->r which is always equal to buf->p + buf->i.
It removed some wrapping detection at a number of places, but required addition
of new relative offset computations at other locations. A large number of places
can be simplified now with extreme care, since most of the time, either the
pointer has to be computed once or we need a difference between the old ->w and
old ->r to compute free space. The cleanup will probably happen with the rewrite
of the buffer_input_* and buffer_output_* functions anyway.
buf->lr still has to move to the struct http_msg and be relative to buf->p
for the rework to be complete.
This change introduces the buffer's base pointer, which is the limit between
incoming and outgoing data. It's the point where the parsing should start
from. A number of computations have already been greatly simplified, but
more simplifications are expected to come from the removal of buf->r.
The changes appear good and have revealed occasional improper use of some
pointers. It is possible that this patch has introduced bugs or revealed
some, although preliminary testings tend to indicate that everything still
works as it should.
We don't have buf->l anymore. We have buf->i for pending data and
the total length is retrieved by adding buf->o. Some computation
already become simpler.
Despite extreme care, bugs are not excluded.
It's worth noting that msg->err_pos as set by HTTP request/response
analysers becomes relative to pending data and not to the beginning
of the buffer. This has not been completed yet so differences might
occur when outgoing data are left in the buffer.
These callbacks are used to retrieve the source and destination address
of a socket. The address flags are not hold on the stream interface and
not on the session anymore. The addresses are collected when needed.
This still needs to be improved to store the IP and port separately so
that it is not needed to perform a getsockname() when only the IP address
is desired for outgoing traffic.
The Unique ID, is an ID generated with several informations. You can use
a log-format string to customize it, with the "unique-id-format" keyword,
and insert it in the request header, with the "unique-id-header" keyword.
%Fi: Frontend IP
%Fp: Frontend Port
%Si: Server IP
%Sp: Server Port
%Ts: Timestamp
%rt: HTTP request counter
%H: hostname
%pid: PID
+X: Hexadecimal represenation
The +X mode in logformat displays hexadecimal for the following flags
%Ci %Cp %Fi %Fp %Bi %Bp %Si %Sp %Ts %ct %pid
rename logformat_write_string() to lf_text()
Optimize size computation
* logformat functions now take a format linked list as argument
* build_logline() build a logline using a format linked list
* rename LOG_* by LOG_FMT_* in enum
* improve error management in build_logline()
memcmp()/strcmp() calls were needed in different parts of code to determine
the status code. Each new status code introduces new calls, which can become
inefficient and source of bugs.
This patch reorganizes the code to rely on a numeric status code internally
and to be hopefully more generic.
Previously, the stats admin page required POST parameters to be provided
exactly in the same order as the HTML form.
This patch allows to handle those parameters in any orders.
Also, note that haproxy won't alter server states anymore if backend or server
names are ambiguous (duplicated names in the configuration) to prevent
unexpected results (the same should probably be applied to the stats socket).
Commit a1cc38 introduced a regression which was easy to trigger till ad4cd58
(snapshots 20120222 to 20120311 included). The bug was still present after
that but harder to trigger.
The bug is caused by the use of two distinct log buffers due to intermediary
changes. The issue happens when an HTTP request is logged just after a TCP
request during the same second and the HTTP request is too large for the buffer.
In this case, it happens that the HTTP request is logged into the TCP buffer
instead and that length controls can't detect anything.
Starting with bddd4f, the issue is still possible when logging too large an
HTTP request just after a send_log() call (typically a server status change).
We owe a big thanks to Sander Klein for testing several snapshots and more
specifically for taking significant risks in production by letting the buggy
version crash several times in order to provide an exploitable core ! The bug
could not have been found without this precious help. Thank you Sander !
This fix does not need to be backported, it did not affect any released version.
Merge http_sess_log() and tcp_sess_log() to sess_log() and move it to
log.c
A new field in logformat_type define if you can use a logformat
variable in TCP or HTTP mode.
doc: log-format in tcp mode
Note that due to the way log buffer allocation currently works, trying to
log an HTTP request without "option httplog" is still not possible. This
will change in the near future.
A number of offset computation functions use struct buffer* arguments
and return integers without modifying the input. Using consts helps
simplifying some operations in callers.
The principle behind this load balancing algorithm was first imagined
and modeled by Steen Larsen then iteratively refined through several
work sessions until it would totally address its original goal.
The purpose of this algorithm is to always use the smallest number of
servers so that extra servers can be powered off during non-intensive
hours. Additional tools may be used to do that work, possibly by
locally monitoring the servers' activity.
The first server with available connection slots receives the connection.
The servers are choosen from the lowest numeric identifier to the highest
(see server parameter "id"), which defaults to the server's position in
the farm. Once a server reaches its maxconn value, the next server is used.
It does not make sense to use this algorithm without setting maxconn. Note
that it can however make sense to use minconn so that servers are not used
at full load before starting new servers, and so that introduction of new
servers requires a progressively increasing load (the number of servers
would more or less follow the square root of the load until maxconn is
reached). This algorithm ignores the server weight, and is more beneficial
to long sessions such as RDP or IMAP than HTTP, though it can be useful
there too.
http_sess_log now use the logformat linked list to make the log
string, snprintf is not used for speed issue.
CLF mode also uses logformat.
NOTE: as of now, empty fields in CLF now are "" not "-" anymore.
parse_logformat_string: parse the string, detect the type: text,
separator or variable
parse_logformat_var: dectect variable name
parse_logformat_var_args: parse arguments and flags
add_to_logformat_list: add to the logformat linked list
send_log function is now splited in 3 functions
* hdr_log: generate the syslog header
* send_log: send a syslog message with a printf format string
* __send_log: send a syslog message
It was reported that a server configured with a zero weight would
sometimes still take connections from the backend queue. This issue is
real, it happens this way :
1) the disabled server accepts a request with a cookie
2) many cookie-less requests accumulate in the backend queue
3) when the disabled server completes its request, it checks its own
queue and the backend's queue
4) the server takes a pending request from the backend queue and
processes it. In response, the server's cookie is assigned to
the client, which ensures that some requests will continue to
be served by this server, leading back to point 1 above.
The fix consists in preventing a zero-weight server from dequeuing pending
requests from the backend. Making use of srv_is_usable() in such tests makes
the tests more robust against future changes.
This fix must be backported to 1.4 and 1.3.
In a config where server "s1" is marked disabled and "s2" tracks "s1",
s2 appears disabled on the stats but is still inserted into the LB farm
because the tracking is resolved too late in the configuration process.
We now resolve tracked servers before building LB maps and we also mark
the tracking server in maintenance mode, which previously was not done,
causing half of the issue.
Last point is that we also protect srv_is_usable() against electing a
server marked for maintenance. This is not absolutely needed but is a
safe choice and makes a lot of sense.
This fix must be backported to 1.4.
New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
The new function does not return IP addresses but header values instead,
so that the caller is free to make what it want of them. The conversion
is not quite clean yet, as the previous test which considered that address
0.0.0.0 meant "no address" is still used. A different IP parsing function
should be used to take this into account.
In commit 4b517ca93a (MEDIUM: buffers:
add some new primitives and rework existing ones), we forgot to check
if buffer_max_len() < l.
No backport is needed.
A number of primitives were missing for buffer management, and some
of them were particularly awkward to use. Specifically, the functions
used to compute free space could not always be used depending what was
wrapping in the buffers. Some documentation has been added about how
the buffers work and their properties. Some functions are still missing
such as a buffer replacement which would support wrapping buffers.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
This patch introduces hdr_len, path_len and url_len for matching these
respective parts lengths against integers. This can be used to detect
abuse or empty headers.
We already had the ability to kill a connection, but it was only
for the checks. Now we can do this for any session, and for this we
add a specific flag "K" to the logs.
The stats socket now allows the admin to disable, enable or shutdown a frontend.
This can be used when a bug is discovered in a configuration and it's desirable
to fix it but the rules in place don't allow to change a running config. Thus it
becomes possible to kill the frontend to release the port and start a new one in
a separate process.
This can also be used to temporarily make haproxy return TCP resets to incoming
requests to pretend the service is not bound. For instance, this may be useful
to quickly flush a very deep SYN backlog.
The frontend check and lookup code was factored with the "set maxconn" usage.
This one enforces a per-process connection rate limit, regardless of what
may be set per frontend. It can be a way to limit the CPU usage of a process
being severely attacked.
The side effect is that the global process connection rate is now measured
for each incoming connection, so it will be possible to report it.
This was revealed with one of the very latest patches which caused
the listener_queue not to be initialized on the stats socket frontend.
And in fact a number of other ones were missing too. This is getting so
boring that now we'll always make use of the same function to initialize
any proxy. Doing so has even saved about 500 bytes on the binary due to
the avoided code redundancy.
No backport is needed.
This function is finally not needed anymore, as it has been replaced with
a per-proxy task that is scheduled when some limits are encountered on
incoming connections or when the process is stopping. The savings should
be noticeable on configs with a large number of proxies. The most important
point is that the rate limiting is now enforced in a clean and solid way.
When a listeners encounters a resource shortage, it currently stops until
one re-enables it. This is far from being perfect as it does not yet handle
the case where the single connection from the listener is rejected (eg: the
stats page).
Now we'll have a special status for resource limited listeners and we'll
queue them into one or multiple lists. That way, each time we have to stop
a listener because of a resource shortage, we can enqueue it and change its
state, so that it is dequeued once more resources are available.
This patch currently does not change any existing behaviour, it only adds
the basic building blocks for doing that.
Managing listeners state is difficult because they have their own state
and can at the same time have theirs dictated by their proxy. The pause
is not done properly, as the proxy code is fiddling with sockets. By
introducing new functions such as pause_listener()/resume_listener(), we
make it a bit more obvious how/when they're supposed to be used. The
listen_proxies() function was also renamed to resume_proxies() since
it's only used for pause/resume.
This patch is the first in a series aiming at getting rid of the maintain_proxies
mess. In the end, proxies should not call enable_listener()/disable_listener()
anymore.
Patch af5149 introduced an issue which can be detected only on out of
memory conditions : a LIST_DEL() may be performed on an uninitialized
struct member instead of a LIST_INIT() during the accept() phase,
causing crashes and memory corruption to occur.
This issue was detected and diagnosed by the Exceliance R&D team.
This is 1.5-specific and very recent, so no existing deployment should
be impacted.
The motivation for this is to allow iteration of all the connections
of a server without the expense of iterating over the global list
of connections.
The first use of this will be to implement an option to close connections
associated with a server when is is marked as being down or in maintenance
mode.
* The declaration of peer_session_create() does
not match its definition. As it is only
used inside of peers.c make it static.
* Make the declaration of peers_register_table()
match its definition.
* Also, make all functions in peers.c that
are not also in peers.h static
Since IPv6 is a different type than IPv4, the pattern fetch functions
src6 and dst6 were added. IPv6 stick-tables can also fetch IPv4 addresses
with src and dst. In this case, the IPv4 addresses are mapped to their
IPv6 counterpart, according to RFC 4291.
Since the latest additions to buffer_forward(), it became too large for
inlining, so let's uninline it. The code size drops by 3kB. Should be
backported to 1.4 too.
Despite much care around handling the content-length as a 64-bit integer,
forwarding was broken on 32-bit platforms due to the 32-bit nature of
the ->to_forward member of the "buffer" struct. The issue is that this
member is declared as a long, so while it works OK on 64-bit platforms,
32-bit truncate the content-length to the lower 32-bits.
One solution could consist in turning to_forward to a long long, but it
is used a lot in the critical path, so it's not acceptable to perform
all buffer size computations on 64-bit there.
The fix consists in changing the to_forward member to a strict 32-bit
integer and ensure in buffer_forward() that only the amount of bytes
that can fit into it is considered. Callers of buffer_forward() are
responsible for checking that their data were taken into account. We
arbitrarily ensure we never consider more than 2G at once.
That's the way it was intended to work on 32-bit platforms except that
it did not.
This issue was tracked down hard at Exosec with Bertrand Jacquin,
Thierry Fournier and Julien Thomas. It remained undetected for a long
time because files larger than 4G are almost always transferred in
chunked-encoded format, and most platforms dealing with huge contents
these days run on 64-bit.
The bug affects all 1.5 and 1.4 versions, and must be backported.
And also rename "req_acl_rule" "http_req_rule". At the beginning that
was a bit confusing to me, especially the "req_acl" list which in fact
holds what we call rules. After some digging, it appeared that some
part of the code is 100% HTTP and not just related to authentication
anymore, so let's move that part to HTTP and keep the auth-only code
in auth.c.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
This patch turns internal server addresses to sockaddr_storage to
store IPv6 addresses, and makes the connect() function use it. This
code already works but some caveats with getaddrinfo/gethostbyname
still need to be sorted out while the changes had to be merged at
this stage of internal architecture changes. So for now the config
parser will not emit an IPv6 address yet so that user experience
remains unchanged.
This change should have absolutely zero user-visible effect, otherwise
it's a bug introduced during the merge, that should be reported ASAP.
This one has been removed and is now totally superseded by ->target.
To get the server, one must use target_srv(&s->target) instead of
s->srv now.
The function ensures that non-server targets still return NULL.
This is in fact where those parts belong to. The old data_state was replaced
by applet.state and is now initialized when the applet is registered. It's
worth noting that the applet does not need to know the session nor the
buffer anymore since everything is brought by the stream interface.
It is possible that having a separate applet struct would simplify the
code but that's not a big deal.
When doing a connect() on a stream interface, some information is needed
from the server and from the backend. In some situations, we don't have
a server and only a backend (eg: peers). In other cases, we know we have
an applet and we don't want to connect to anything, but we'd still like
to have the info about the applet being used.
For this, we now store a pointer to the "target" into the stream interface.
The target describes what's on the other side before trying to connect. It
can be a server, a proxy or an applet for now. Later we'll probably have
descriptors for multiple-stage chains so that the final information may
still be found.
This will help removing many specific cases in the code. It already made
it possible to remove the "srv" and "be" parameters to tcpv4_connect_server().
I/O handlers are still delicate to manipulate. They have no type, they're
just raw functions which have no knowledge of themselves. Let's have them
declared as applets once for all. That way we can have multiple applets
share the same handler functions and we can store their names there. When
we later need to add more parameters (eg: usage stats), we'll be able to
do so in the applets themselves.
The CLI functions has been prefixed with "cli" instead of "stats" as it's
clearly what is going on there.
The applet descriptor in the stream interface should get all the applet
specific data (st0, ...) but this will be done in the next patch so that
we don't pollute this one too much.
Debugging parsing errors can be greatly improved if we know what the parser
state was and what the buffer flags were (especially for closed inputs/outputs
and full buffers). Let's add that to the error snapshots.
Enhance pattern convs and fetch argument parsing, now fetchs and convs callbacks used typed args.
Add more details on error messages on parsing pattern expression function.
Update existing pattern convs and fetchs to new proto.
Create stick table key type "binary".
Manage Truncation and padding if pattern's fetch-converted result don't match table key size.
The introduction of a new PROXY protocol for proxied connections requires
an early analyser to decode the incoming connection and set the session
flags accordingly.
Some more work is needed, among which setting a flag on the session to
indicate it's proxied, and copying the original parameters for later
comparisons with new ACLs (eg: real_src, ...).
The stats web interface must be read-only by default to prevent security
holes. As it is now allowed to enable/disable servers, a new keyword
"stats admin" is introduced to activate this admin level, conditioned by ACLs.
(cherry picked from commit 5334bab92ca7debe36df69983c19c21b6dc63f78)
Based on a patch provided by Judd Montgomery, it is now possible to
enable/disable servers from the stats web interface. This allows to select
several servers in a backend and apply the action to them at the same time.
Currently, there are 2 known limitations :
- The POST data are limited to one packet
(don't alter too many servers at a time).
- Expect: 100-continue is not supported.
(cherry picked from commit 7693948766cb5647ac03b48e782cfee2b1f14491)
There was no consistency between all the functions used to exchange data
between a buffer and a stream interface. Also, the functions used to send
data to a buffer did not consider the possibility that the buffer was
shutdown for read.
Now the functions are called buffer_{put,get}_{char,block,chunk,string}.
The old buffer_feed* functions have been left available for existing code
but marked deprecated.
Signal zero is never delivered by the system. However having a signal to
which functions and tasks can subscribe to be notified of a stopping event
is useful. So this patch does two things :
1) allow signal zero to be delivered from any function of signal handler
2) make soft_stop() deliver this signal so that tasks can be notified of
a stopping condition.
The two new functions below make it possible to register any number
of functions or tasks to a system signal. They will be called in the
registration order when the signal is received.
struct sig_handler *signal_register_fct(int sig, void (*fct)(struct sig_handler *), int arg);
struct sig_handler *signal_register_task(int sig, struct task *task, int reason);
In case of HTTP keepalive processing, we want to release the counters tracked
by the backend. Till now only the second set of counters was released, while
it could have been assigned by the frontend, or the backend could also have
assigned the first set. Now we reuse to unused bits of the session flags to
mark which stick counters were assigned by the backend and to release them as
appropriate.
The assumption that there was a 1:1 relation between tracked counters and
the frontend/backend role was wrong. It is perfectly possible to track the
track-fe-counters from the backend and the track-be-counters from the
frontend. Thus, in order to reduce confusion, let's remove this useless
{fe,be} reference and simply use {1,2} instead. The keywords have also been
renamed in order to limit confusion. The ACL rule action now becomes
"track-sc{1,2}". The ACLs are now "sc{1,2}_*" instead of "trk{fe,be}_*".
That means that we can reasonably document "sc1" and "sc2" (sticky counters
1 and 2) as sort of patterns that are available during the whole session's
life and use them just like any other pattern.
Having a single tracking pointer for both frontend and backend counters
does not work. Instead let's have one for each. The keyword has changed
to "track-be-counters" and "track-fe-counters", and the ACL "trk_*"
changed to "trkfe_*" and "trkbe_*".
It's a bit cumbersome to have to know all possible storable types
from the stats interface. Instead, let's have generic types for
all data, which will facilitate their manipulation.
It is now possible to dump a table's contents with keys, expire,
use count, and various data using the command above on the stats
socket.
"show table" only shows main table stats, while "show table <name>"
dumps table contents, only if the socket level is admin.
This patch adds support for the following session counters :
- http_req_cnt : HTTP request count
- http_req_rate: HTTP request rate
- http_err_cnt : HTTP request error count
- http_err_rate: HTTP request error rate
The equivalent ACLs have been added to check the tracked counters
for the current session or the counters of the current source.
This function looks up a key, updates its expiration date, or creates
it if it was not found. acl_fetch_src_updt_conn_cnt() was updated to
make use of it.
These counters maintain incoming connection rates and session rates
in a stick-table, over a period which is defined in the configuration
(2 ms to 24 days). They can be used to detect service abuse and
enforce a certain accept rate per source address for instance, and
block if the rate is passed over.
Example :
# block if more than 50 requests per 5 seconds from a source.
stick-table type ip size 200k expire 1m store conn_rate(5s),sess_rate(5s)
tcp-request track-counters src
tcp-request reject if { trk_conn_rate gt 50 }
# cause a 3 seconds pause to requests from sources in excess of 20 requests/5s
tcp-request inspect-delay 3s
tcp-request content accept if { trk_sess_rate gt 20 } WAIT_END
We're now able to return errors based on the validity of an argument
passed to a stick-table store data type. We also support ARG_T_DELAY
to pass delays to stored data types (eg: for rate counters).
Some data types will require arguments (eg: period for a rate counter).
This patch adds support for such arguments between parenthesis in the
"store" directive of the stick-table statement. Right now only integers
are supported.
When a session tracks a counter, automatically increase the cumulated
connection count. This makes src_updt_conn_cnt() almost useless. In
fact it might still be used to update different tables.
The new "conn_cur" session counter has been added. It is automatically
updated upon "track XXX" directives, and the entry is touched at the
moment we increment the value so that we don't consider further counter
updates as real updates, otherwise we would end up updating upon completion,
which may not be desired. Probably that some other event counters (eg: HTTP
requests) will have to be updated upon each event though.
This counter can be matched against current session's source address using
the "src_conn_cur" ACL.
This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
The buffer_feed* functions that are used to send data to buffers did only
support sending contiguous chunks while they're relying on memcpy(). This
patch improves on this by making them able to write in two chunks if needed.
Thus, the buffer_almost_full() function has been improved to really consider
the remaining space and not just what can be written at once.
Some freq counters will have to work on periods different from 1 second.
The original freq counters rely on the period to be exactly one second.
The new ones (freq_ctr_period) let the user define the period in ticks,
and all computations are operated over that period. When reading a value,
it indicates the amount of events over that period too.
When an entry already exists, we just need to update its expiration
timer. Let's have a dedicated function for that instead of spreading
open code everywhere.
This change also ensures that an update of an existing sticky session
really leads to an update of its expiration timer, which was apparently
not the case till now. This point needs to be checked in 1.4.
Till now sticky sessions only held server IDs. Now there are other
data types so it is not acceptable anymore to overwrite the server ID
when writing something. The server ID must then only be written from
the caller when appropriate. Doing this has also led to separate
lookup and storage.
The stick_tables will now be able to store extra data for a same key.
A limited set of extra data types will be defined and for each of them
an offset in the sticky session will be assigned at startup time. All
of this information will be stored in the stick table.
The extra data types will have to be specified after the new "store"
keyword of the "stick-table" directive, which will reserve some space
for them.
pattern.c depended on stick_table while in fact it should be the opposite.
So we move from pattern.c everything related to stick_tables and invert the
dependency. That way the code becomes more logical and intuitive.
Right now we're only able to store a server ID in a sticky session.
The goal is to be able to store anything whose size is known at startup
time. For this, we store the extra data before the stksess pointer,
using a negative offset. It will then be easy to cumulate multiple
data provided they each have their own offset.
Now we're able to reject connections very early, so we need to use a
different counter for the connections that are received and the ones
that are accepted and converted into sessions, so that the rate limits
can still apply to the accepted ones. The session rate must still be
used to compute the rate limit, so that we can reject undesired traffic
without affecting the rate.
A new function session_accept() is now called from the lower layer to
instanciate a new session. Once the session is instanciated, the upper
layer's frontent_accept() is called. This one can be service-dependant.
That way, we have a 3-phase accept() sequence :
1) protocol-specific, session-less accept(), which is pointed to by
the listener. It defaults to the generic stream_sock_accept().
2) session_accept() which relies on a frontend but not necessarily
for use in a proxy (eg: stats or any future service).
3) frontend_accept() which performs the accept for the service
offerred by the frontend. It defaults to frontend_accept() which
is really what is used by a proxy.
The TCP/HTTP proxies have been moved to this mode so that we can now rely on
frontend_accept() for any type of session initialization relying on a frontend.
The next step will be to convert the stats to use the same system for the stats.
It's not normal to initialize the server-side stream interface from the
accept() function, because it may change later. Thus, we introduce a new
stream_sock_prepare_interface() function which is called just before the
connect() and which sets all of the stream_interface's callbacks to the
default ones used for real sockets. The ->connect function is also set
at the same instant so that we can easily add new server-side protocols
soon.
The new LI_O_TCP_RULES listener option indicates that some TCP rules
must be checked upon accept on this listener. It is now checked by
the frontend and the L4 rules are evaluated only in this case. The
flag is only set when at least one tcp-req rule is present in the
frontend.
The L4 rules check function has now been moved to proto_tcp.c where
it ought to be.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
The 'client.c' file now only contained frontend-specific functions,
so it has naturally be renamed 'frontend.c'. Same for client.h. This
has also been an opportunity to remove some cross references from
files that should not have depended on it.
In the end, this file should contain a protocol-agnostic accept()
code, which would initialize a session, task, etc... based on an
accept() from a lower layer. Right now there are still references
to TCP.
Some functions which act on generic buffer contents without being
tcp-specific were historically in proto_tcp.c. This concerns ACLs
and RDP cookies. Those have been moved away to more appropriate
locations. Ideally we should create some new files for each layer6
protocol parser. Let's do that later.
Using get_ip_from_hdr2() we can look for occurrence #X or #-X and
extract the IP it contains. This is typically designed for use with
the X-Forwarded-For header.
Using "usesrc hdr_ip(name,occ)", it becomes possible to use the IP address
found in <name>, and possibly specify occurrence number <occ>, as the
source to connect to a server. This is possible both in a server and in
a backend's source statement. This is typically used to use the source
IP previously set by a upstream proxy.
The transparent proxy address selection was set in the TCP connect function
which is not the most appropriate place since this function has limited
access to the amount of parameters which could produce a source address.
Instead, now we determine the source address in backend.c:connect_server(),
right after calling assign_server_address() and we assign this address in
the session and pass it to the TCP connect function. This cannot be performed
in assign_server_address() itself because in some cases (transparent mode,
dispatch mode or http_proxy mode), we assign the address somewhere else.
This change will open the ability to bind to addresses extracted from many
other criteria (eg: from a header).
The following patch fixed an issue but brought another one :
296897 [MEDIUM] connect to servers even when the input has already been closed
The new issue is that when a connection is inspected and aborted using
TCP inspect rules, now it is sent to the server before being closed. So
that test is not satisfying. A probably better way is not to prevent a
connection from establishing if only BF_SHUTW_NOW is set but BF_SHUTW
is not. That way, the BF_SHUTW flag is not set if the request has any
data pending, which still fixes the stats issue, but does not let any
empty connection pass through.
Also, as a safety measure, we extend buffer_abort() to automatically
disable the BF_AUTO_CONNECT flag. While it appears to always be OK,
it is by pure luck, so better safe than sorry.
The trash buffer may now be smaller than a buffer because we can tune
it at run time. This causes a risk when we're trying to use it as a
temporary buffer to realign unaligned requests, because we may have to
put up to a full buffer into it.
Instead of doing a double copy, we're now relying on an open-coded
bouncing copy algorithm. The principle is that we move one byte at
a time to its final place, and if that place also holds a byte, then
we move it too, and so on. We finish when we've moved all the buffer.
It limits the number of memory accesses, but since it proceeds one
byte at a time and with random walk, it's not cache friendly and
should be slower than a double copy. However, it's only used in
extreme situations and the difference will not be noticeable.
It has been extensively tested and works reliably.
This is a first attempt to add a maintenance mode on servers, using
the stat socket (in admin level).
It can be done with the following command :
- disable server <backend>/<server>
- enable server <backend>/<server>
In this mode, no more checks will be performed on the server and it
will be marked as a special DOWN state (MAINT).
If some servers were tracking it, they'll go DOWN until the server
leaves the maintenance mode. The stats page and the CSV export also
display this special state.
This can be used to disable the server in haproxy before doing some
operations on this server itself. This is a good complement to the
"http-check disable-on-404" keyword and works in TCP mode.
Support the new syntax (http-request allow/deny/auth) in
http stats.
Now it is possible to use the same syntax is the same like in
the frontend/backend http-request access control:
acl src_nagios src 192.168.66.66
acl stats_auth_ok http_auth(L1)
stats http-request allow if src_nagios
stats http-request allow if stats_auth_ok
stats http-request auth realm LB
The old syntax is still supported, but now it is emulated
via private acls and an aditional userlist.
Add generic authentication & authorization support.
Groups are implemented as bitmaps so the count is limited to
sizeof(int)*8 == 32.
Encrypted passwords are supported with libcrypt and crypt(3), so it is
possible to use any method supported by your system. For example modern
Linux/glibc instalations support MD5/SHA-256/SHA-512 and of course classic,
DES-based encryption.
