To be used, error messages declared in a default section must be copied when the
parsing of a proxy section starts. But this was only done for frontends.
This patch may be backported to older versions.
In 1.8, commit 45a66cc ("MEDIUM: config: ensure that tune.bufsize is at
least 16384 when using HTTP/2") tried to avoid an annoying issue making
H2 fail when haproxy is built with default buffer sizes smaller than 16kB,
which used to be the case for a very long time. Sadly, the test only sees
when NPN/ALPN exactly match "h2" and not when it's combined like
"h2,http/1.1" nor "http/1.1,h2". We can safely use strstr() there because
the string is prefixed by the token's length (0x02) which is unambiguous
as it cannot be part of any other token.
This fix should be backported to 1.8 as a safety guard against bad
configurations.
This patch implements analysers for parsing the CLI and extra features
for the master's CLI.
For each command (sent alone, or separated by ; or \n) the request
analyser will determine to which server it should send the request.
The 'mode cli' proxy is able to parse a prefix for each command which is
used to select the apropriate server. The prefix start by @ and is
followed by "master", the PID preceded by ! or the relative PID. (e.g.
@master, @1, @!1234). The servers are not round-robined anymore.
The command is sent with a SHUTW which force the server to close the
connection after sending its response. However the proxy allows a
keepalive connection on the client side and does not close.
The response analyser does not do much stuff, it only reinits the
connection when it received a close from the server, and forward the
response. It does not analyze the response data.
The only guarantee of the end of the response is the close of the
server, we can't rely on the double \n since it's not send by every
command.
This could be reimplemented later as a filter.
This option makes a proxy use only HTX-compatible muxes instead of the
HTTP-compatible ones for HTTP modes. It must be set on both ends, this
is checked at parsing time.
peers_init_sync() doesn't check task_new()'s return value and doesn't
return any result to indicate success or failure. Let's make it return
an int and check it from the caller.
This can be backported as far as 1.6.
Since keep-alive mode is the default mode, the passive close has disappeared,
and in the code, httpclose and forceclose options are handled the same way:
connections with the client and the server are closed as soon as the request and
the response are received and missing "Connection: close" header is added in
each direction.
So to make things clearer, forceclose is now an alias for httpclose. And
httpclose is explicitly an active close. So the old passive close does not exist
anymore. Internally, the flag PR_O_HTTP_PCL has been removed and PR_O_HTTP_FCL
has been replaced by PR_O_HTTP_CLO. In HTTP analyzers, the checks done to find
the right mode to use, depending on proxies options and "Connection: " header
value, have been simplified.
This should only be a cleanup and no changes are expected.
This option is frontends specific, so there is no reason to support it on
backends. So now, it is ignored if it is set on a backend and a warning is
emitted during the startup. The change is quite trivial, but the commit is
tagged as MEDIUM because it is a small breakage with previous versions and
configurations using this options could emit a warning now.
This option is backends specific, so there is no reason to support it on
frontends. So now, it is ignored if it is set on a frontend and a warning is
emitted during the startup. The change is quite trivial, but the commit is
tagged as MEDIUM because it is a small breakage with previous versions and
configurations using this options could emit a warning now.
These ones are mostly called from cfgparse.c for the parsing and do
not depend on the HTTP representation. The functions's prototypes
were moved to proto/http_rules.h, making this file work exactly like
tcp_rules. Ideally we should stop calling these functions directly
from cfgparse and register keywords, but there are a few cases where
that wouldn't work (stats http-request) so it's probably not worth
trying to go this far.
This protocol is based on the uxst one, but it uses socketpair and FD
passing insteads of a connect()/accept().
The "sockpair@" prefix has been implemented for both bind and server
keywords.
When HAProxy wants to connect through a sockpair@, it creates 2 new
sockets using the socketpair() syscall and pass one of the socket
through the FD specified on the server line.
On the bind side, haproxy will receive the FD, and will use it like it
was the FD of an accept() syscall.
This protocol was designed for internal communication within HAProxy
between the master and the workers, but it's possible to use it
externaly with a wrapper and pass the FD through environment variabls.
When threads are disabled, some variables such as tid and tid_bit are
still checked everywhere, the MAX_THREADS_MASK macro is ~0UL while
MAX_THREADS is 1, and the all_threads_mask variable is replaced with a
macro forced to zero. The compiler cannot optimize away all this code
involving checks on tid and tid_bit, and we end up in special cases
where all_threads_mask has to be specifically tested for being zero or
not. It is not even certain the code paths are always equivalent when
testing without threads and with nbthread 1.
Let's change this to make sure we always present a single thread when
threads are disabled, and have the relevant values declared as constants
so that the compiler can optimize all the tests away. Now we have
MAX_THREADS_MASK set to 1, all_threads_mask set to 1, tid set to zero
and tid_bit set to 1. Doing just this has removed 4 kB of code in the
no-thread case.
A few checks for all_threads_mask==0 have been removed since it never
happens anymore.
The "process" directive on "bind" lines supports process references and
thread references. No check is performed on the thread number validity,
so that if a listener is only bound to non-existent threads, the traffic
will never be processed. It easily happens when setting one bind line per
thread with an incorrect (or reduced) thread count. No warning appears
and some random connections are never served. It also happens when setting
thread references with threads support disabled at build time.
This patch makes use of the all_threads_mask variable to detect if some
referenced threads don't exist, to emit a warning and fix this.
This patch needs to be backported to 1.8, just like the previous one which
it depends on (MINOR: threads: move "nbthread" parsing to hathreads.c).
The purpose is to make sure that all variables which directly depend
on this nbthread argument are set at the right moment. For now only
all_threads_mask needs to be set. It used to be set while calling
thread_sync_init() which is called too late for certain checks. The
same function handles threads and non-threads, which removes the need
for some thread-specific knowledge from cfgparse.c.
Thierry discovered that the following config crashes haproxy while
parsing the config (it's probably the smallest crasher) :
defaults
stick-table type ip size 1M
And indeed it does because it looks for the current proxy's name which it
does not have as it's the default one. This affects all versions since 1.6.
This fix must be backported to all versions back to 1.6.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
This introduces a new directive for the `resolvers` section:
`parse-resolv-conf`. When present, it will attempt to add any
nameservers in `/etc/resolv.conf` to the list of nameservers
for the current `resolvers` section.
[Mailing list thread][1].
[1]: https://www.mail-archive.com/haproxy@formilux.org/msg29600.html
There's no real reason to have a specific scheduler for applets anymore, so
nuke it and just use tasks. This comes with some benefits, the first one
being that applets cannot induce high latencies anymore since they share
nice values with other tasks. Later it will be possible to configure the
applets' nice value. The second benefit is that the applet scheduler was
not very thread-friendly, having a big lock around it in prevision of this
change. Thus applet-intensive workloads should now scale much better with
threads.
Some more improvement is possible now : some applets also use a task to
handle timers and timeouts. These ones could now be simplified to use only
one task.
For large farms where servers are regularly added or removed, picking
a random server from the pool can ensure faster load transitions than
when using round-robin and less traffic surges on the newly added
servers than when using leastconn.
This commit introduces "balance random". It internally uses a random as
the key to the consistent hashing mechanism, thus all features available
in consistent hashing such as weights and bounded load via hash-balance-
factor are usable. It is extremely convenient because one common concern
when using random is what happens when a server is hammered a bit too
much. Here that can trivially be avoided, like in the configuration below :
backend bk0
balance random
hash-balance-factor 110
server-template s 1-100 127.0.0.1:8000 check inter 1s
Note that while "balance random" internally relies on a hash algorithm,
it holds the same properties as round-robin and as such is compatible with
reusing an existing server connection with "option prefer-last-server".
Louis Chanouha reported an inappropriate warning when http-reuse is
present in a defaults section while a TCP proxy accidently inherits
it and finds a conflict with other options like the use of the PROXY
protocol. To fix this patch removes the http-reuse option for TCP
proxies.
This fix needs to be backported to 1.8, 1.7 and possibly 1.6.
With "log global" line, the global list of loggers are copied into the proxy's
struct. The list coming from the default section is also copied when a frontend
or a backend section is parsed. So it is possible to have duplicate entries in
the proxy's list. For instance, with this following config, all messages will be
logged twice:
global
log 127.0.0.1 local0 debug
daemon
defaults
mode http
log global
option httplog
frontend front-http
log global
bind *:8888
default_backend back-http
backend back-http
server www 127.0.0.1:8000
Now, the function parse_logsrv should be used to parse a "log" line. This
function will update the list of loggers passed in argument. It can release all
log servers when "no log" line was parsed (by the caller) or it can parse "log
global" or "log <address> ... " lines. It takes care of checking the caller
context (global or not) to prohibit "log global" usage in the global section.
>From the very first day of force-persist and ignore-persist features,
they only applied to backends, except that the documentation stated it
could also be applied to frontends.
In order to make it clear, the documentation is updated and the parser
will raise a warning if the keywords are used in a frontend section.
This patch should be backported up to the 1.5 branch.
Martin Brauer reported an unexpected warning when some parts of the
global stats are defined but not the listening address, like below :
global
#stats socket run/admin.sock mode 660 level admin
stats timeout 30s
Then haproxy complains :
[WARNING] 334/150131 (23086) : config : frontend 'GLOBAL' has no
'bind' directive. Please declare it as a backend if this was intended.
This is because of the check for a bind-less frontend (the global section
creates a frontend for the stats). There's no clean fix for this one, so
here we're simply checking that the frontend is not the global stats one
before emitting the warning.
This patch should be backported to all stable versions.
This one allows not to inflate some structures when threads are
disabled. Now struct global is 1.4 kB instead of 33 kB.
Should be backported to 1.8 for ease of backporting of upcoming
patches.
Commit 4cfede87a3 removed
`exit-on-failure` in favor of `no-exit-on-failure`, but failed
to update references to the former in user facing messages.
This should be backported to haproxy 1.8.
"monitor-uri" may rely on "monitor fail" rules, which are processed
very early, immediately after the HTTP request is parsed and before
any http rulesets. It's not reported by the config parser when this
ruleset is misplaces, causing some configurations not to work like
users would expect. Let's just add the warning for a misplaced rule.
This patch changes the behavior of the master during the exit of a
worker.
When a worker exits with an error code, for example in the case of a
segfault, all workers are now killed and the master leaves.
If you don't want this behavior you can use the option
"master-worker no-exit-on-failure".
During the migration to the second version of the pools, the new
functions and pool pointers were all called "pool_something2()" and
"pool2_something". Now there's no more pool v1 code and it's a real
pain to still have to deal with this. Let's clean this up now by
removing the "2" everywhere, and by renaming the pool heads
"pool_head_something".
Rename the global variable "proxy" to "proxies_list".
There's been multiple proxies in haproxy for quite some time, and "proxy"
is a potential source of bugs, a number of functions have a "proxy" argument,
and some code used "proxy" when it really meant "px" or "curproxy". It worked
by pure luck, because it usually happened while parsing the config, and thus
"proxy" pointed to the currently parsed proxy, but we should probably not
rely on this.
[wt: some of these are definitely fixes that are worth backporting]
Now, it is possible to bind CPU at the thread level instead of the process level
by defining a thread set in "cpu-map" directives. Thus, its format is now:
cpu-map [auto:]<process-set>[/<thread-set>] <cpu-set>...
where <process-set> and <thread-set> must follow the format:
all | odd | even | number[-[number]]
Having a process range and a thread range in same time with the "auto:" prefix
is not supported. Only one range is supported, the other one must be a fixed
number. But it is allowed when there is no "auto:" prefix.
Because it is possible to define a mapping for a process and another for a
thread on this process, threads will be bound on the intersection of their
mapping and the one of the process on which they are attached. If the
intersection is null, no specific binding will be set for the threads.
It was a temporary directive used for development purpose. Now, CPU mapping for
at the thread level should be done using the cpu-map directive. This feature
will be added in a next commit.
Now, processa and CPU ranges can be partially defined. The higher bound can be
omitted. In such case, it is replaced by the corresponding maximum value, 32 or
64 depending on the machine's word size.
By extension, It is also true for the "bind-process" directive and "process"
parameter on a "bind" or a "stats socket" line.
The prefix "auto:" can be added before the process set to let HAProxy
automatically bind a process to a CPU by incrementing process and CPU sets. To
be valid, both sets must have the same size. No matter the declaration order of
the CPU sets, it will be bound from the lower to the higher bound.
Examples:
# all these lines bind the process 1 to the cpu 0, the process 2 to cpu 1
# and so on.
cpu-map auto:1-4 0-3
cpu-map auto:1-4 0-1 2-3
cpu-map auto:1-4 3 2 1 0
# bind each process to exaclty one CPU using all/odd/even keyword
cpu-map auto:all 0-63
cpu-map auto:even 0-31
cpu-map auto:odd 32-63
# invalid cpu-map because process and CPU sets have different sizes.
cpu-map auto:1-4 0 # invalid
cpu-map auto:1 0-3 # invalid
Now, this function returns a status code to indicate a success (0) or a failure
(1) and the error message in set in <err> parameter. And the result of the parsing
is set in <proc> parameter.
Now, you can define processes concerned by a cpu-map line using a range. For
instance, the following line binds the first 32 processes on CPUs 0 to 3:
cpu-map 1-32 0-3
HTTP/2 mandates the support of 16384 bytes frames by default, so we need
a large enough buffer to process them. Till now if tune.bufsize was too
small, H2 connections were simply rejected during their establishment,
making it quite hard to troubleshoot the issue.
Now we detect when HTTP/2 is enabled on an HTTP frontend and emit an
error if tune.bufsize is not large enough, with the appropriate
recommendation.
At the end of the master initialisation, a call to protocol_unbind_all()
was made, in order to close all the FDs.
Unfortunately, this function closes the inherited FDs (fd@), upon reload
the master wasn't able to reload a configuration with those FDs.
The create_listeners() function now store a flag to specify if the fd
was inherited or not.
Replace the protocol_unbind_all() by mworker_cleanlisteners() +
deinit_pollers()
By default, no affinity is set for threads. To bind threads on CPU, you must
define a "thread-map" in the global section. The format is the same than the
"cpu-map" parameter, with a small difference. The process number must be
defined, with the same format than cpu-map ("all", "even", "odd" or a number
between 1 and 31/63).
A thread will be bound on the intersection of its mapping and the one of the
process on which it is attached. If the intersection is null, no specific bind
will be set for the thread.
A lock is used to protect accesses to a peer structure.
A the lock is taken in the applet handler when the peer is identified
and released living the applet handler.
In the scheduling task for peers section, the lock is taken for every
listed peer and released at the end of the process task function.
The peer 'force shutdown' function was also re-worked.
A lock for LB parameters has been added inside the proxy structure and atomic
operations have been used to update server variables releated to lb.
The only significant change is about lb_map. Because the servers status are
updated in the sync-point, we can call recalc_server_map function synchronously
in map_set_server_status_up/down function.
2 global locks have been added to protect, respectively, the run queue and the
wait queue. And a process mask has been added on each task. Like for FDs, this
mask is used to know which threads are allowed to process a task.
For many tasks, all threads are granted. And this must be your first intension
when you create a new task, else you have a good reason to make a task sticky on
some threads. This is then the responsibility to the process callback to lock
what have to be locked in the task context.
Nevertheless, all tasks linked to a session must be sticky on the thread
creating the session. It is important that I/O handlers processing session FDs
and these tasks run on the same thread to avoid conflicts.
Email alerts relies on checks to send emails. The link between a mailers section
and a proxy was resolved during the configuration parsing, But initialization was
done when the first alert is triggered. This implied memory allocations and
tasks creations. With this patch, everything is now initialized during the
configuration parsing. So when an alert is triggered, only the memory required
by this alert is dynamically allocated.
Moreover, alerts processing had a flaw. The task handler used to process alerts
to be sent to the same mailer, process_email_alert, was designed to give back
the control to the scheduler when an alert was sent. So there was a delay
between the sending of 2 consecutives alerts (the min of
"proxy->timeout.connect" and "mailer->timeout.mail"). To fix this problem, now,
we try to process as much queued alerts as possible when the task is woken up.
This is a huge patch with many changes, all about the DNS. Initially, the idea
was to update the DNS part to ease the threads support integration. But quickly,
I started to refactor some parts. And after several iterations, it was
impossible for me to commit the different parts atomically. So, instead of
adding tens of patches, often reworking the same parts, it was easier to merge
all my changes in a uniq patch. Here are all changes made on the DNS.
First, the DNS initialization has been refactored. The DNS configuration parsing
remains untouched, in cfgparse.c. But all checks have been moved in a post-check
callback. In the function dns_finalize_config, for each resolvers, the
nameservers configuration is tested and the task used to manage DNS resolutions
is created. The links between the backend's servers and the resolvers are also
created at this step. Here no connection are kept alive. So there is no needs
anymore to reopen them after HAProxy fork. Connections used to send DNS queries
will be opened on demand.
Then, the way DNS requesters are linked to a DNS resolution has been
reworked. The resolution used by a requester is now referenced into the
dns_requester structure and the resolution pointers in server and dns_srvrq
structures have been removed. wait and curr list of requesters, for a DNS
resolution, have been replaced by a uniq list. And Finally, the way a requester
is removed from a DNS resolution has been simplified. Now everything is done in
dns_unlink_resolution.
srv_set_fqdn function has been simplified. Now, there is only 1 way to set the
server's FQDN, independently it is done by the CLI or when a SRV record is
resolved.
The static DNS resolutions pool has been replaced by a dynamoc pool. The part
has been modified by Baptiste Assmann.
The way the DNS resolutions are triggered by the task or by a health-check has
been totally refactored. Now, all timeouts are respected. Especially
hold.valid. The default frequency to wake up a resolvers is now configurable
using "timeout resolve" parameter.
Now, as documented, as long as invalid repsonses are received, we really wait
all name servers responses before retrying.
As far as possible, resources allocated during DNS configuration parsing are
releases when HAProxy is shutdown.
Beside all these changes, the code has been cleaned to ease code review and the
doc has been updated.
Allow to register a function which will be called after the
configuration file parsing, at the end of the check_config_validity().
It's useful fo checking dependencies between sections or for resolving
keywords, pointers or values.
This commit implements a post section callback. This callback will be
used at the end of a section parsing.
Every call to cfg_register_section must be modified to use the new
prototype:
int cfg_register_section(char *section_name,
int (*section_parser)(const char *, int, char **, int),
int (*post_section_parser)());
This function is used to create a series of listeners for a specific
address and a port range. It automatically calls the matching protocol
handlers to add them to the relevant lists. This way cfgparse doesn't
need to manipulate listeners anymore. As an added bonus, the memory
allocation is checked.
cfgparse has no business directly calling each individual protocol's 'add'
function to create a listener. Now that they're all registered, better
perform a protocol lookup on the family and have a standard ->add method
for all of them.
It's a shame that cfgparse() has to make special cases of each protocol
just to cast the port to the target address family. Let's pass the port
in argument to the function. The unix listener simply ignores it.
During the configuration parsing, log buffers are reallocated when
global.max_syslog_len is updated. This can be done serveral time. So, instead of
doing it serveral time, we do it only once after the configuration parsing.
Now, we use init_log_buffers and deinit_log_buffers to, respectively, initialize
and deinitialize log buffers used for syslog messages.
These functions have been introduced to be used by threads, to deal with
thread-local log buffers.
Trash buffers are reallocated when "tune.bufsize" parameter is changed. Here, we
just move the realloc after the configuration parsing.
Given that the config parser doesn't rely on the trash size, it should be
harmless.
Now, we use init_trash_buffers and deinit_trash_buffers to, respectively,
initialize and deinitialize trash buffers (trash, trash_buf1 and trash_buf2).
These functions have been introduced to be used by threads, to deal with
thread-local trash buffers.
Historically listeners used to have a handler depending on the upper
layer. But now it's exclusively process_stream() and nothing uses it
anymore so it can safely be removed.
Since commit 9d8dbbc ("MINOR: dns: Maximum DNS udp payload set to 8192") it's
possible to specify a packet size, but passing too large a size or a negative
size is not detected and results in memset() being performed over a 2GB+ area
upon receipt of the first DNS response, causing runtime crashes.
We now check that the size is not smaller than the smallest packet which is
the DNS header size (12 bytes).
No backport is needed.
Following up DNS extension introduction, this patch aims at making the
computation of the maximum number of records in DNS response dynamic.
This computation is based on the announced payload size accepted by
HAProxy.
The "hold obsolete" timer is used to prevent HAProxy from moving a server to
an other IP or from considering the server as DOWN if the IP currently
affected to this server has not been seen for this period of time in DNS
responses.
That said, historically, HAProxy used to update servers as soon as the IP
has disappeared from the response. Current default timeout break this
historical behavior and may change HAProxy's behavior when people will
upgrade to 1.8.
This patch changes the default value to 0 to keep backward compatibility.
Edns extensions may be used to negotiate some settings between a DNS
client and a server.
For now we only use it to announce the maximum response payload size accpeted
by HAProxy.
This size can be set through a configuration parameter in the resolvers
section. If not set, it defaults to 512 bytes.
Make it so for each server, instead of specifying a hostname, one can use
a SRV label.
When doing so, haproxy will first resolve the SRV label, then use the
resulting hostnames, as well as port and weight (priority is ignored right
now), to each server using the SRV label.
It is resolved periodically, and any server disappearing from the SRV records
will be removed, and any server appearing will be added, assuming there're
free servers in haproxy.
As DNS servers may not return all IPs in one answer, we want to cache the
previous entries. Those entries are removed when considered obsolete, which
happens when the IP hasn't been returned by the DNS server for a time
defined in the "hold obsolete" parameter of the resolver section. The default
is 30s.
When several stick-tables were configured with several peers sections,
only a part of them could be synchronized: the ones attached to the last
parsed 'peers' section. This was due to the fact that, at least, the peer I/O handler
refered to the wrong peer section list, in fact always the same: the last one parsed.
The fact that the global peer section list was named "struct peers *peers"
lead to this issue. This variable name is dangerous ;).
So this patch renames global 'peers' variable to 'cfg_peers' to ensure that
no such wrong references are still in use, then all the functions wich used
old 'peers' variable have been modified to refer to the correct peer list.
Must be backported to 1.6 and 1.7.
The pool used to log the uri was created with a size of 0 because the
configuration and 'tune.http.logurilen' were parsed too earlier.
The fix consist to postpone the pool_create as it is done for
cookie captures.
Regression introduced with 'MINOR: log: Add logurilen tunable'
We cannot store more than 32K headers in the structure hdr_idx, because
internaly we use signed short integers. To avoid any bugs (due to an integers
overflow), a check has been added on tune.http.maxhdr to be sure to not set a
value greater than 32767 and lower than 1 (because this is a nonsense to set
this parameter to a value <= 0).
The documentation has been updated accordingly.
This patch can be backported in 1.7, 1.6 and 1.5.
This patch is a major upgrade of the internal run-time DNS resolver in
HAProxy and it brings the following 2 main changes:
1. DNS resolution task
Up to now, DNS resolution was triggered by the health check task.
From now, DNS resolution task is autonomous. It is started by HAProxy
right after the scheduler is available and it is woken either when a
network IO occurs for one of its nameserver or when a timeout is
matched.
From now, this means we can enable DNS resolution for a server without
enabling health checking.
2. Introduction of a dns_requester structure
Up to now, DNS resolution was purposely made for resolving server
hostnames.
The idea, is to ensure that any HAProxy internal object should be able
to trigger a DNS resolution. For this purpose, 2 things has to be done:
- clean up the DNS code from the server structure (this was already
quite clean actually) and clean up the server's callbacks from
manipulating too much DNS resolution
- create an agnostic structure which allows linking a DNS resolution
and a requester of any type (using obj_type enum)
3. Manage requesters through queues
Up to now, there was an uniq relationship between a resolution and it's
owner (aka the requester now). It's a shame, because in some cases,
multiple objects may share the same hostname and may benefit from a
resolution being performed by a third party.
This patch introduces the notion of queues, which are basically lists of
either currently running resolution or waiting ones.
The resolutions are now available as a pool, which belongs to the resolvers.
The pool has has a default size of 64 resolutions per resolvers and is
allocated at configuration parsing.
This patch introduces a some re-organisation around the DNS code in
HAProxy.
1. make the dns_* functions less dependent on 'struct server' and 'struct resolution'.
With this in mind, the following changes were performed:
- 'struct dns_options' has been removed from 'struct resolution' (well,
we might need it back at some point later, we'll see)
==> we'll use the 'struct dns_options' from the owner of the resolution
- dns_get_ip_from_response(): takes a 'struct dns_options' instead of
'struct resolution'
==> so the caller can pass its own dns options to get the most
appropriate IP from the response
- dns_process_resolve(): struct dns_option is deduced from new
resolution->requester_type parameter
2. add hostname_dn and hostname_dn_len into struct server
In order to avoid recomputing a server's hostname into its domain name
format (and use a trash buffer to store the result), it is safer to
compute it once at configuration parsing and to store it into the struct
server.
In the mean time, the struct resolution linked to the server doesn't
need anymore to store the hostname in domain name format. A simple
pointer to the server one will make the trick.
The function srv_alloc_dns_resolution() properly manages everything for
us: memory allocation, pointer updates, etc...
3. move resolvers pointer into struct server
This patch makes the pointer to struct dns_resolvers from struct
dns_resolution obsolete.
Purpose is to make the resolution as "neutral" as possible and since the
requester is already linked to the resolvers, then we don't need this
information anymore in the resolution itself.
The default len of request uri in log messages is 1024. In some use
cases, you need to keep the long trail of GET parameters. The only
way to increase this len is to recompile with DEFINE=-DREQURI_LEN=2048.
This commit introduces a tune.http.logurilen configuration directive,
allowing to tune this at runtime.
This option exits every workers when one of the current workers die.
It allows you to monitor the master process in order to relaunch
everything on a failure.
For example it can be used with systemd and Restart=on-failure in a spec
file.
This commit remove the -Ds systemd mode in HAProxy in order to replace
it by a more generic master worker system. It aims to replace entirely
the systemd wrapper in the near future.
The master worker mode implements a new way of managing HAProxy
processes. The master is in charge of parsing the configuration
file and is responsible for spawning child processes.
The master worker mode can be invoked by using the -W flag. It can be
used either in background mode (-D) or foreground mode. When used in
background mode, the master will fork to daemonize.
In master worker background mode, chroot, setuid and setgid are done in
each child rather than in the master process, because the master process
will still need access to filesystem to reload the configuration.
When HAProxy is running with multiple processes and some listeners
arebound to processes, the unused sockets were not closed in the other
processes. The aim was to be able to send those listening sockets using
the -x option.
However to ensure the previous behavior which was to close those
sockets, we provided the "no-unused-socket" global option.
This patch changes this behavior, it will close unused sockets which are
not in the same process as an expose-fd socket, making the
"no-unused-socket" option useless.
The "no-unused-socket" option was removed in this patch.
This patch adds a new stats socket command to modify server
FQDNs at run time.
Its syntax:
set server <backend>/<server> fqdn <FQDN>
This patch also adds FQDNs to server state file at the end
of each line for backward compatibility ("-" if not present).
This patch makes backend sections support 'server-template' new keyword.
Such 'server-template' objects are parsed similarly to a 'server' object
by parse_server() function, but its first arguments are as follows:
server-template <ID prefix> <nb | range> <ip | fqdn>:<port> ...
The remaining arguments are the same as for 'server' lines.
With such server template declarations, servers may be allocated with IDs
built from <ID prefix> and <nb | range> arguments.
For instance declaring:
server-template foo 1-5 google.com:80 ...
or
server-template foo 5 google.com:80 ...
would be equivalent to declare:
server foo1 google.com:80 ...
server foo2 google.com:80 ...
server foo3 google.com:80 ...
server foo4 google.com:80 ...
server foo5 google.com:80 ...
When running with multiple process, if some proxies are just assigned
to some processes, the other processes will just close the file descriptors
for the listening sockets. However, we may still have to provide those
sockets when reloading, so instead we just try hard to pretend those proxies
are dead, while keeping the sockets opened.
A new global option, no-reused-socket", has been added, to restore the old
behavior of closing the sockets not bound to this process.
The error doesn't prevent checking for other errors after an invalid
character was detected in an ACL name. Better quit ASAP to avoid risking
to emit garbled and confusing error messages if something else fails on
the same line.
This should be backported to 1.7, 1.6 and 1.5.
There is a silly case where a loop is not detected in tracked servers lists:
when a server tracks itself.
Ex:
server srv1 127.0.0.1:8000 track srv1
Well, this never happens and this does not prevent haproxy from working.
But with this next following configuration:
server srv1 127.0.0.1:8000 track srv2
server srv2 127.0.0.1:8000 track srv2
server srv3 127.0.0.1:8000 track srv2
the code in charge of detecting such loops never returns (without any error message).
haproxy becomes stuck in an infinite loop because of this statement found
in check_config_validity():
for (loop = srv->track; loop && loop != newsrv; loop = loop->track);
Again, such a configuration is never accidentally used I guess.
This latter example seems silly, but as several 'default-server' directives may be used
in the same proxy section, and as 'default-server' settings are not resetted each a
new 'default-server' line is created, it will match the following configuration, in the future,
when 'track' setting will be supported by 'default-server':
default-server track srv3
server srv1 127.0.0.1:8000
server srv2 127.0.0.1:8000
.
.
.
default-server check
server srv3 127.0.0.1:8000
(cherry picked from commit 6528fc93d3c065fdac841f24e55cfe9674a67414)
This adds a new "dynamic" keyword for the cookie option. If set, a cookie
will be generated for each server (assuming one isn't already provided on
the "server" line), from the IP of the server, the TCP port, and a secret
key provided. To provide the secret key, a new keyword as been added,
"dynamic-cookie-key", for backends.
Example :
backend bk_web
balance roundrobin
dynamic-cookie-key "bla"
cookie WEBSRV insert dynamic
server s1 127.0.0.1:80 check
server s2 192.168.56.1:80 check
This is a first step to be able to dynamically add and remove servers,
without modifying the configuration file, and still have all the load
balancers redirect the traffic to the right server.
Provide a way to generate session cookies, based on the IP address of the
server, the TCP port, and a secret key provided.
Surprizingly, http-request, http-response, block, redirect, and capture
rules did not cause a warning to be emitted when used in a TCP proxy, so
let's fix this.
This patch may be backported to older versions as it helps spotting
configuration issues.
Adrian Fitzpatrick reported that since commit f51658d ("MEDIUM: config:
relax use_backend check to make the condition optional"), typos like "of"
instead of "if" on use_backend rules are not properly detected. The reason
is that the parser only checks for "if" or "unless" otherwise it considers
there's no keyword, making the rule inconditional.
This patch fixes it. It may reveal some rare config bugs for some people,
but will not affect valid configurations.
This fix must be backported to 1.7, 1.6 and 1.5.
The previous version used an O(number of proxies)^2 algo to get the sum of
the number of maxconns of frontends which reference a backend at least once.
This new version adds the frontend's maxconn number to the backend's
struct proxy member 'tot_fe_maxconn' when the backend name is resolved
for switching rules or default_backend statment. At the end, the final
backend's fullconn is computed looping only one time for all on proxies O(n).
The load of a configuration using a large amount of backends (10 thousands)
without configured fullconn was reduced from several minutes to few seconds.
