The support is all based on static responses. This doesn't add any
request / response logic to HAProxy, but allows a way to update
information through the socket interface.
Currently certificates specified using "crt" or "crt-list" on "bind" lines
are loaded as PEM files.
For each PEM file, haproxy checks for the presence of file at the same path
suffixed by ".ocsp". If such file is found, support for the TLS Certificate
Status Request extension (also known as "OCSP stapling") is automatically
enabled. The content of this file is optional. If not empty, it must contain
a valid OCSP Response in DER format. In order to be valid an OCSP Response
must comply with the following rules: it has to indicate a good status,
it has to be a single response for the certificate of the PEM file, and it
has to be valid at the moment of addition. If these rules are not respected
the OCSP Response is ignored and a warning is emitted. In order to identify
which certificate an OCSP Response applies to, the issuer's certificate is
necessary. If the issuer's certificate is not found in the PEM file, it will
be loaded from a file at the same path as the PEM file suffixed by ".issuer"
if it exists otherwise it will fail with an error.
It is possible to update an OCSP Response from the unix socket using:
set ssl ocsp-response <response>
This command is used to update an OCSP Response for a certificate (see "crt"
on "bind" lines). Same controls are performed as during the initial loading of
the response. The <response> must be passed as a base64 encoded string of the
DER encoded response from the OCSP server.
Example:
openssl ocsp -issuer issuer.pem -cert server.pem \
-host ocsp.issuer.com:80 -respout resp.der
echo "set ssl ocsp-response $(base64 -w 10000 resp.der)" | \
socat stdio /var/run/haproxy.stat
This feature is automatically enabled on openssl 0.9.8h and above.
This work was performed jointly by Dirkjan Bussink of GitHub and
Emeric Brun of HAProxy Technologies.
The time statistics computed by previous patches are now reported in the
HTML stats in the tips related to the total sessions for backend and servers,
and as separate columns for the CSV stats.
Now that we can quote unsafe string, it becomes possible to dump the health
check responses on the CSV page as well. The two new fields are "last_chk"
and "last_agt".
As reported by Vincent Bernat and Ryan O'Hara, building haproxy with the
option above causes this :
src/dumpstats.c: In function 'stats_dump_sv_stats':
src/dumpstats.c:3059:4: error: format not a string literal and no format arguments [-Werror=format-security]
cc1: some warnings being treated as errors
make: *** [src/dumpstats.o] Error 1
With that option, gcc wants an argument after a string format even when
that string format is a const but not a litteral. It can be anything
invalid, for example an integer when a string is expected, it just
wants something. So feed it with something :-(
One important aspect of SSL performance tuning is the cache size,
but there's no metric to know whether it's large enough or not. This
commit introduces two counters, one for the cache lookups and another
one for cache misses. These counters are reported on "show info" on
the stats socket. This way, it suffices to see the cache misses
counter constantly grow to know that a larger cache could possibly
help.
It's commonly needed to know how many SSL asymmetric keys are computed
per second on either side (frontend or backend), and to know the SSL
session reuse ratio. Now we compute these values and report them in
"show info".
When an agent is enabled and forces a down state, it's important to have
this exact information and to report the agent's status, so let's check
the agent before checking the health check.
Commit 671b6f0 ("MEDIUM: Add enable and disable agent unix socket commands")
forgot to update the relevant help messages. This was done in 1.5-dev20, no
backport is needed.
Till now we only had "DOWN" on the stats page, whether it's the agent
or regular checks which caused this status. Let's differentiate the
two with "DOWN (agent)" so that admins know that the agent is causing
this status.
This command supports "agent", "health", "state" and "weight" to adjust
various server attributes as well as changing server health check statuses
on the fly or setting the drain mode.
Instead of enabling/disabling maintenance mode and drain mode separately
using 4 actions, we now offer 3 simplified actions :
- set state to READY
- set state to DRAIN
- set state to MAINT
They have the benefit of reporting the same state as displayed on the page,
and of doing the double-switch atomically eg when switching from drain to
maint.
Note that the old actions are still supported for users running scripts.
This patch adds support for a new "drain" mode. So now we have 3 admin
modes for a server :
- READY
- DRAIN
- MAINT
The drain mode disables load balancing but leaves the server up. It can
coexist with maint, except that maint has precedence. It is also inherited
from tracked servers, so just like maint, it's represented with 2 bits.
New functions were designed to set/clear each flag and to propagate the
changes to tracking servers when relevant, and to log the changes. Existing
functions srv_set_adm_maint() and srv_set_adm_ready() were replaced to make
use of the new functions.
Currently the drain mode is not yet used, however the whole logic was tested
with all combinations of set/clear of both flags in various orders to catch
all corner cases.
Now that servers have their own states, let's report this one instead of
following the tracked server chain and reporting the tracked server's.
However the tracked server is still used to report x/y when a server is
going up or down. When the agent reports a down state, this one is still
enforced.
Now that it is possible to know whether a server is in forced maintenance
or inherits its maintenance status from another one, it is possible to
allow server tracking at more than one level. We still provide a loop
detection however.
Note that for the stats it's a bit trickier since we have to report the
check state which corresponds to the state of the server at the end of
the chain.
This change now involves a new flag SRV_ADMF_IMAINT to note that the
maintenance status of a server is inherited from another server. Thus,
we know at each server level in the chain if it's running, in forced
maintenance or in a maintenance status because it tracks another server,
or even in both states.
Disabling a server propagates this flag down to other servers. Enabling
a server flushes the flag down. A server becomes up again once both of
its flags are cleared.
Two new functions "srv_adm_set_maint()" and "srv_adm_set_ready()" are used to
manipulate this maintenance status. They're used by the CLI and the stats
page.
Now the stats page always says "MAINT" instead of "MAINT(via)" and it's
only the chk/down field which reports "via x/y" when the status is
inherited from another server, but it doesn't say it when a server was
forced into maintenance. The CSV output indicates "MAINT (via x/y)"
instead of only "MAINT(via)". This is the most accurate representation.
One important thing is that now entering/leaving maintenance for a
tracking server correctly follows the state of the tracked server.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
The DRAIN status is not inherited between tracked servers, so the stats
page must only use the reported server's status and not the tracked
server's status, otherwise it misleadingly indicates a DRAIN state when
a server tracks a draining server, while this is wrong.
This flag is only a copy of (srv->uweight == 0), so better get rid of
it to reduce some of the confusion that remains in the code, and use
a simple function to return this state based on this weight instead.
Having both "active or backup DOWN" and "not checked" on the left side of
the color caption inflates the whole header block for no reason. Simply
move them both on the same line and reduce the header height.
Commit f465994198 removed the "via" link when a tracking server is in maintenance, but
still calculated an empty link that no one can use. We can safely remove it.
The "via" column includes a link to the tracked server but instead of closing
the link with a </a> tag, a new tag is opened.
This typo should also be backported to 1.4
Some consistency checks cannot be performed between frontends, backends
and peers at the moment because there is no way to check for intersection
between processes bound to some processes when the number of processes is
higher than the number of bits in a word.
So first, let's limit the number of processes to the machine's word size.
This means nbproc will be limited to 32 on 32-bit machines and 64 on 64-bit
machines. This is far more than enough considering that configs rarely go
above 16 processes due to scalability and management issues, so 32 or 64
should be fine.
This way we'll ensure we can always build a mask of all the processes a
section is bound to.
Last fix did address the issue for inlined patterns, but it was not
enough because the flags are lost as well when updating patterns
dynamically over the CLI.
Also if the same file was used once with -i and another time without
-i, their references would have been merged and both would have used
the same matching method.
It's appear that the patterns have two types of flags. The first
ones are relative to the pattern matching, and the second are
relative to the pattern storage. The pattern matching flags are
the same for all the patterns of one expression. Now they are
stored in the expression. The storage flags are information
returned by the pattern mathing function. This information is
relative to each entry and is stored in the "struct pattern".
Now, the expression matching flags are forwarded to the parse
and index functions. These flags are stored during the
configuration parsing, and they are used during the parse and
index actions.
This issue was introduced in dev23 with the major pattern rework,
and is a continuation of commit a631fc8 ("BUG/MAJOR: patterns: -i
and -n are ignored for inlined patterns"). No backport is needed.
These flags are only passed to pattern_read_from_file() which
loads the patterns from a file. The functions used to parse the
patterns from the current line do not provide the means to pass
the pattern flags so they're lost.
This issue was introduced in dev23 with the major pattern rework,
and was reported by Graham Morley. No backport is needed.
We used to emit either 1.0 or 1.1 depending on whether we were sending
chunks or not. This condition is useless, better always send 1.1. Also
that way at least clients and intermediary proxies know we speak 1.1.
The "Connection: close" header is still set anyway.
OK, for once it cannot easily know this one, and certain versions are
emitting this harmless warning :
src/dumpstats.c: In function 'http_stats_io_handler':
src/dumpstats.c:4507:19: warning: 'last_fwd' may be used uninitialized in this function [-Wmaybe-uninitialized]
This basically reimplements commit f3221f9 ("MEDIUM: stats: add support
for HTTP keep-alive on the stats page") which was reverted by commit
51437d2 after Igor Chan reported a broken stats page caused by the bug
fix by previous commit.
This patch replace the word <name> by the word <file>. This word defines
the (string) returned by show "map/acl". This patch also update
documentation to explain how is composed the map or acl identifier.
This flag is no longer used. The last place using this, are the display
of the result of pattern matching in the cli command "get map" or "get
acl".
The first parameter of this command is the reference of the file used to
perform the lookup.
If acl is shared with a map, the "add acl" command must be blocked
because it not take a sample on his parameters. The absense of this
parameter can cause error with corresponding maps.
This patch adds new display type. This display returns allocated string,
when the string is flush into buffers, it is freed. This permit to
return the content of "memprintf(err, ...)" messages.
The pat_ref_add functions has changed to return error.
Each pattern displayed is associated to the value of his pattern
reference. This value can be used for deleting the entry. It is useful
with complex regex: the users are not forced to write the regex with all
the amiguous chars and escaped chars on the CLI.
Before this patch, the "get map/acl" function try to convert and display
the sample. This behavior is not efficient because some type like the
regex cannot be reversed and displayed as string.
This patch display the original stored reference.
The pattern reference are stored with two identifiers: the unique_id and
the reference.
The reference identify a file. Each file with the same name point to the
same reference. We can register many times one file. If the file is
modified, all his dependencies are also modified. The reference can be
used with map or acl.
The unique_id identify inline acl. The unique id is unique for each acl.
You cannot force the same id in the configuration file, because this
repport an error.
The format of the acl and map listing through the "socket" has changed
for displaying these new ids.
This patch extract the expect_type variable from the "struct pattern" to
"struct pattern_head". This variable is set during the declaration of
ACL and MAP. With this change, the function "pat_parse_len()" become
useless and can be replaced by "pat_parse_int()".
Implicit ACLs by default rely on the fetch's output type, so let's simply do
the same for all other ones. It has been verified that they all match.
Sometimes the same pattern file is used with the same index, parse and
parse_smp functions. If this two condition are true, these two pattern
are identical and the same struct can be used.
This patch add the following socket command line options:
show acl [<id>]
clear acl <id>
get acl <id> <pattern>
del acl <id> <pattern>
add acl <id> <pattern>
The system used for maps is backported in the pattern functions.
Some functions needs to change the sample associated to pattern. This
new pointer permit to return the a pointer to the sample pointer. The
caller can use or change the value.
This commit adds a delete function for patterns. It looks up all
instances of the pattern to delete and deletes them all. The fetch
keyword declarations have been extended to point to the appropriate
delete function.
