Released version 3.2-dev13 with the following main changes :
- MEDIUM: checks: Make sure we return the tasklet from srv_chk_io_cb
- MEDIUM: listener: Make sure w ereturn the tasklet from accept_queue_process
- MEDIUM: mux_fcgi: Make sure we return the tasklet from fcgi_deferred_shut
- MEDIUM: quic: Make sure we return the tasklet from qcc_io_cb
- MEDIUM: quic: Make sure we return NULL in quic_conn_app_io_cb if needed
- MEDIUM: quic: Make sure we return the tasklet from quic_accept_run
- BUG/MAJOR: tasklets: Make sure he tasklet can't run twice
- BUG/MAJOR: listeners: transfer connection accounting when switching listeners
- MINOR: ssl/cli: add a '-t' option to 'show ssl sni'
- DOC: config: fix ACME paragraph rendering issue
- DOC: config: clarify log-forward "host" option
- MINOR: promex: expose ST_I_PX_RATE (current_session_rate)
- BUILD: acme: use my_strndup() instead of strndup()
- BUILD: leastconn: fix build warning when building without threads on old machines
- MINOR: threads: prepare DEBUG_THREAD to receive more values
- MINOR: threads: turn the full lock debugging to DEBUG_THREAD=2
- MEDIUM: threads: keep history of taken locks with DEBUG_THREAD > 0
- MINOR: threads/cli: display the lock history on "show threads"
- MEDIUM: thread: set DEBUG_THREAD to 1 by default
- BUG/MINOR: ssl/acme: free EVP_PKEY upon error
- MINOR: acme: separate the code generating private keys
- MINOR: acme: failure when no directory is specified
- MEDIUM: acme: generate the account file when not found
- MEDIUM: acme: use 'crt-base' to load the account key
- MINOR: compiler: add more macros to detect macro definitions
- MINOR: cli: split APPCTX_CLI_ST1_PROMPT into two distinct flags
- MEDIUM: cli: make the prompt mode configurable between n/i/p
- MEDIUM: mcli: make the prompt mode configurable between i/p
- MEDIUM: mcli: replicate the current mode when enterin the worker process
- DOC: configuration: acme account key are auto generated
- CLEANUP: acme: remove old TODO for account key
- DOC: configuration: add quic4 to the ssl-f-use example
- BUG/MINOR: acme: does not try to unlock after a failed trylock
- BUG/MINOR: mux-h2: fix the offset of the pattern for the ping frame
- MINOR: tcp: add support for setting TCP_NOTSENT_LOWAT on both sides
- BUG/MINOR: acme: creating an account should not end the task
- MINOR: quic: rename min/max fields for congestion window algo
- MINOR: quic: refactor BBR API
- BUG/MINOR: quic: ensure cwnd limits are always enforced
- MINOR: thread: define cshared type
- MINOR: quic: account for global congestion window
- MEDIUM: quic: limit global Tx memory
- MEDIUM: acme: use a map to store tokens and thumbprints
- BUG/MINOR: acme: remove references to virt@acme
- MINOR: applet: add appctx_schedule() macro
- BUG/MINOR: dns: add tempo between 2 connection attempts for dns servers
- CLEANUP: dns: remove unused dns_stream_server struct member
- BUG/MINOR: dns: prevent ds accumulation within dss
- CLEANUP: proxy: mention that px->conn_retries isn't relevant in some cases
- DOC: ring: refer to newer RFC5424
- MINOR: tools: make my_strndup() take a size_t len instead of and int
- MINOR: Add "sigalg" to "sigalg name" helper function
- MINOR: ssl: Add traces to ssl init/close functions
- MINOR: ssl: Add traces to recv/send functions
- MINOR: ssl: Add traces to ssl_sock_io_cb function
- MINOR: ssl: Add traces around SSL_do_handshake call
- MINOR: ssl: Add traces to verify callback
- MINOR: ssl: Add ocsp stapling callback traces
- MINOR: ssl: Add traces to the switchctx callback
- MINOR: ssl: Add traces about sigalg extension parsing in clientHello callback
- MINOR: Add 'conn' param to ssl_sock_chose_sni_ctx
- BUG/MEDIUM: mux-spop: Wait end of handshake to declare a spop connection ready
- BUG/MEDIUM: mux-spop: Handle CLOSING state and wait for AGENT DISCONNECT frame
- BUG/MINOR: mux-h1: Don't pretend connection was released for TCP>H1>H2 upgrade
- BUG/MINOR: mux-h1: Fix trace message in h1_detroy() to not relay on connection
- BUILD: ssl: Fix wolfssl build
- BUG/MINOR: mux-spop: Use the right bitwise operator in spop_ctl()
- MEDIUM: mux-quic: increase flow-control on each bufsize
- MINOR: mux-quic: limit emitted MSD frames count per qcs
- MINOR: add hlua_yield_asap() helper
- MINOR: hlua_fcn: enforce yield after *_get_stats() methods
- DOC: config: restore default values for resolvers hold directive
- MINOR: ssl/cli: "acme ps" shows the acme tasks
- MINOR: acme: acme_ctx_destroy() returns upon NULL
- MINOR: acme: use acme_ctx_destroy() upon error
- MEDIUM: tasks: Mutualize code between tasks and tasklets.
- MEDIUM: tasks: More code factorization
- MEDIUM: tasks: Remove TASK_IN_LIST and use TASK_QUEUED instead.
- MINOR: tasks: Remove unused tasklet_remove_from_tasklet_list
- MEDIUM: tasks: Mutualize the TASK_KILLED code between tasks and tasklets
- BUG/MEDIUM: connections: Report connection closing in conn_create_mux()
- BUILD/MEDIUM: quic: Make sure we build with recent changes
Add an extra parametre to conn_create_mux(), "closed_connection".
If a pointer is provided, then let it know if the connection was closed.
Callers have no way to determine that otherwise, and we need to know
that, at least in ssl_sock_io_cb(), as if the connection was closed we
need to return NULL, as the tasklet was free'd, otherwise that can lead
to memory corruption and crashes.
This should be backported if 9240cd4a27
is backported too.
The code to handle a task/tasklet when it's been killed before it were
to run is mostly identical, so move it outside of task and tasklet
specific code, and inside the common code.
This commit is just cosmetic, and should have no impact.
TASK_QUEUED was used to mean "the task has been scheduled to run",
TASK_IN_LIST was used to mean "the tasklet has been scheduled to run",
remove TASK_IN_LIST and just use TASK_QUEUED for tasklets instead.
This commit is just cosmetic, and should not have any impact.
There is some code that should run no matter if the task was killed or
not, and was needlessly duplicated, so only use one instance.
This also fixes a small bug when a tasklet that got killed before it
could run would still count as a tasklet that ran, when it should not,
which just means that we'd run one less useful task before going back to
the poller.
This commit is mostly cosmetic, and should not have any impact.
The code that checks if we're currently running, and waits if so, was
identical between tasks and tasklets, so move it in code common to tasks
and tasklets.
This commit is just cosmetic, and should not have any impact.
Use acme_ctx_destroy() instead of a simple free() upon error in the
"acme renew" error handling.
It's better to use this function to be sure than everything has been
been freed.
Implement a way to display the running acme tasks over the CLI.
It currently only displays a "Running" status with the certificate name
and the acme section from the configuration.
The displayed running tasks are limited to the size of a buffer for now,
it will require a backref list later to be called multiple times to
resume the list.
Default values for hold directive (resolver context) used to be documented
but this was lost when the keyword description was reworked in 24b319b
("Default value is 10s for "valid", 0s for "obsolete" and 30s for
others.")
Restoring the part that describes the default value.
It may be backported to all stable versions with 24b319b
{listener,proxy,server}_get_stats() methods are know to be expensive,
expecially if used under an iteration. Indeed, while automatic yield
is performed every X lua instructions (defaults to 10k), computing an
object's stats 10K times in a single cpu loop is not desirable and
could create contention.
In this patch we leverage hlua_yield_asap() at the end of *_get_stats()
methods in order to force the automatic yield to occur ASAP after the
method returns. Hopefully this should help in similar scenarios as the
one described in GH #2903
When called, this function will try to enforce a yield (if available) as
soon as possible. Indeed, automatic yield is already enforced every X
Lua instructions. However, there may be some cases where we know after
running heavy operation that we should yield already to avoid taking too
much CPU at once.
This is what this function offers, instead of asking the user to manually
yield using "core.yield()" from Lua itself after using an expensive
Lua method offered by haproxy, we can directly enforce the yield without
the need to do it in the Lua script.
The previous commit has implemented a new calcul method for
MAX_STREAM_DATA frame emission. Now, a frame may be emitted as soon as a
buffer was consumed by a QCS instance.
This will probably increase the number of MAX_STREAM_DATA frame
emission. It may even cause a series of frame emitted for the same
stream with increasing values under high load, which is completely
unnecessary.
To improve this, limit the number of MAX_STREAM_DATA frames built to one
per QCS instance. This is implemented by storing a reference to this
frame in QCS structure via a new member <tx.msd_frm>.
Note that to properly reset QCS msd_frm member, emission of flow-control
frames have been changed. Now, each frame is emitted individually. On
one side, it is better as it prevent to emit frames related to different
streams in a single datagram, which is not desirable in case of packet
loss. However, this can also increase sendto() syscall invocation.
Recently, QCS Rx allocation buffer method has been improved. It is now
possible to allocate multiple buffers per QCS instances, which was
necessary to improve HTTP/3 POST throughput.
However, a limitation remained related to the emission of
MAX_STREAM_DATA. These frames are only emitted once at least half of the
receive capacity has been consumed by its QCS instance. This may be too
restrictive when a client need to upload a large payload.
Improve this by adjusting MAX_STREAM_DATA allocation. If QCS capacity is
still limited to 1 or 2 buffers max, the old calcul is still used. This
is necessary when user has limited upload throughput via their
configuration. If QCS capacity is more than 2 buffers, a new frame is
emitted if at least a buffer was consumed.
This patch has reduced number of STREAM_DATA_BLOCKED frames received in
POST tests with some specific clients.
Becaues of a typo, '||' was used instead of '|' to test the SPOP conneciton
flags and decide if the mux is ready or not. The regression was introduced
in the commit fd7ebf117 ("BUG/MEDIUM: mux-spop: Wait end of handshake to
declare a spop connection ready").
This patch must be backported to 3.1 with the commit above.
The newly added SSL traces require an extra 'conn' parameter to
ssl_sock_chose_sni_ctx which was added in the "regular" code but not in
the wolfssl specific one.
Wolfssl also has a different prototype for some getter functions
(SSL_get_servername for instance), which do not expect a const SSL while
openssl version does.
h1_destroy() may be called to release a H1C after a multiplexer upgrade. In
that case, the connection is no longer attached to the H1C. It must not be
used in the h1 trace message because the connection context is no longer a H1C.
Because of this bug, when a H1>H2 upgrade is performed, a crash may be
experienced if the H1 traces are enabled.
This patch must be backport to all stable versions.
When an applicative upgrade of the H1 multiplexer is performed, we must not
pretend the connection was released. Indeed, in that case, a H1 stream is
still their with a stream connector attached on it. It must be detached
first before releasing the H1 connection and the underlying connection. So
it is important to not pretend the connection was already released.
Concretely, in that case h1_process() must return 0 instead of -1. It is
minor error because, AFAIK, it is harmless. But it is not correct. So let's
fix it to avoid futur bugs.
To be clear, this happens when a TCP connection is upgraded to H1 connection
and a H2 preface is detected, leading to a second upgrade from H1 to H2.
This patch may be backport to all stable versions.
In the SPOE specification, when an error occurred on the SPOP connection,
HAProxy must send a DISCONNECT frame and wait for the agent DISCONNECT frame
in return before trully closing the connection.
However, this part was not properly handled by the SPOP multiplexer. In this
case, the SPOP connection should be in the CLOSING state. But this state was
not used at all. Depending on when the error was encountered, the connection
could be closed immediately, without sending any DISCONNECT frame. It was
the case when an early error was detected during the AGENT-HELLO frame
parsing. Or it could be moved from ERROR to FRAME_H state, as if no error
were detected. This case was less dramatic than it seemed because some flags
were also set to prevent any problem. But it was not obvious.
So now, the SPOP connection is properly switch to CLOSING state when an
DISCONNECT is sent to the agent to be able to wait for its DISCONNECT in
reply. spop_process_demux() was updated to parse frames in that state and
some validity checks was added.
This patch must be backport to 3.1.
A SPOP connection must not be considered as ready while the hello handshake
is not finished with success. In addition, no error or shutdown must have
been reported for the underlying connection. Otherwise a freshly openned
spop connexion may be reused while it is in fact dead, leading to a
connection retry.
This patch must be backported to 3.1.
We had to parse the sigAlg extension by hand in order to properly select
the certificate used by the SSL frontends. These traces allow to dump
the allowed sigAlg list sent by the client in its clientHello.
This callback allows to pick the used certificate on an SSL frontend.
The certificate selection is made according to the information sent by
the client in the clientHello. The traces that were added will allow to
better understand what certificate was chosen and why. It will also warn
us if the chosen certificate was the default one.
The actual certificate parsing happens in ssl_sock_chose_sni_ctx. It's
in this function that we actually get the filename of the certificate
used.
If OCSP stapling fails because of a missing or invalid OCSP response we
used to silently disable stapling for the given session. We can now know
a bit more what happened regarding OCSP stapling.
Those traces dump information about the multiple SSL_do_handshake calls
(renegotiation and regular call). Some errors coud also be dumped in
case of rejected early data.
Depending on the chosen verbosity, some information about the current
handshake can be dumped as well (servername, tls version, chosen cipher
for instance).
In case of failed handshake, the error codes and messages will also be
dumped in the log to ease debugging.
Add a dedicated trace for some unlikely allocation failures and async
errors. Those traces will ostly be used to identify the start and end of
a given SSL connection.
This function can be used to convert a TLSv1.3 sigAlg entry (2bytes)
from the signature_agorithms client hello extension into a string.
In order to ease debugging, some TLSv1.2 combinations can also be
dumped. In TLSv1.2 those signature algorithms pairs were built out of a
one byte signature identifier combined to a one byte hash identifier.
In TLSv1.3 those identifiers are two bytes blocs that must be treated as
such.
In relation to issue #2954, it appears that turning some size_t length
calculations to the int that uses my_strndup() upsets coverity a bit.
Instead of dealing with such warnings each time, better address it at
the root. An inspection of all call places show that the size passed
there is always positive so we can safely use an unsigned type, and
size_t will always suit it like for strndup() where it's available.
Since 91e785edc ("MINOR: stream: Rely on a per-stream max connection
retries value"), px->conn_retries may be ignored in the following cases:
* proxy not part of a list which gets properly post-init (ie: main proxy
list, log-forward list, sink list)
* proxy lacking the CAP_FE capability
Documenting such cases where the px->conn_retries is set but effectively
ignored, so that we either remove ignored statements or fix them in
the future if they are really needed. In fact all cases affected here are
automomous applets that already handle the retries themselves so the fact
that 91e785edc made ->conn_retries ineffective should not be a big deal
anyway.
when dns session callback (dns_session_release()) is called upon error
(ie: when some pending queries were not sent), we try our best to
re-create the applet in order to preserve the pending queries and give
them a chance to be retried. This is done at the end of
dns_session_release().
However, doing so exposes to an issue: if the error preventing queries
from being sent is still encountered over and over the dns session could
stay there indefinitely. Meanwhile, other dns sessions may be created on
the same dns_stream_server periodically. If previous failing dns sessions
don't terminate but we also keep creating new ones, we end up accumulating
failing sessions on a given dns_stream_server, which can eventually cause
ressource shortage.
This issue was found when trying to address ("BUG/MINOR: dns: add tempo
between 2 connection attempts for dns servers")
To fix it, we track the number of failed consecutive sessions for a given
dns server. When we reach the threshold (set to 100), we consider that the
link to the dns server is broken (at least temporarily) and we force
dns_session_new() to fail, so that we stop creating new sessions until one
of the existing one eventually succeeds.
A workaround for this fix consists in setting the "maxconn" parameter on
nameserver directive (under resolvers section) to a reasonnable value so
that no more than "maxconn" sessions may co-exist on the same server at
a given time.
This may be backported to all stable versions.
("CLEANUP: dns: remove unused dns_stream_server struct member") may be
backported to ease the backport.
As reported by Lukas Tribus on the mailing list [1], trying to connect to
a nameserver with invalid network settings causes haproxy to retry a new
connection attempt immediately which eventually causes unexpected CPU usage
on the thread responsible for the applet (namely 100% on one CPU will be
observed).
This can be reproduced with the test config below:
resolvers default
nameserver ns1 tcp4@8.8.8.8:53 source 192.168.99.99
listen listen
mode http
bind :8080
server s1 www.google.com resolvers default init-addr none
To fix this the issue, we add a temporisation of one second between a new
connection attempt is retried. We do this in dns_session_create() when we
know that the applet was created in the release callback (when previous
query attempt was unsuccessful), which means initial connection is not
affected.
[1]: https://www.mail-archive.com/haproxy@formilux.org/msg45665.html
This should fix GH #2909 and may be backported to all stable versions.
This patch depends on ("MINOR: applet: add appctx_schedule() macro")
"virt@acme" was the default map used during development, now this must
be configured in the acme section or it won't try to use any map.
This patch removes the references to virt@acme in the comments and the
code.
The stateless mode which was documented previously in the ACME example
is not convenient for all use cases.
First, when HAProxy generates the account key itself, you wouldn't be
able to put the thumbprint in the configuration, so you will have to get
the thumbprint and then reload.
Second, in the case you are using multiple account key, there are
multiple thumbprint, and it's not easy to know which one you want to use
when responding to the challenger.
This patch allows to configure a map in the acme section, which will be
filled by the acme task with the token corresponding to the challenge,
as the key, and the thumbprint as the value. This way it's easy to reply
the right thumbprint.
Example:
http-request return status 200 content-type text/plain lf-string "%[path,field(-1,/)].%[path,field(-1,/),map(virt@acme)]\n" if { path_beg '/.well-known/acme-challenge/' }
Define a new settings tune.quic.frontend.max-tot-window. It contains a
size argument which can be used to set a limit on the sum of all QUIC
connections congestion window. This is applied both on
quic_cc_path_set() and quic_cc_path_inc().
Note that this limitation cannot reduce a congestion window more than
the minimal limit which is set to 2 datagrams.
Use the newly defined cshared type to account for the sum of congestion
window of every QUIC connection. This value is stored in global counter
quic_mem_global defined in proto_quic module.
Define a new type "struct cshared". This can be used as a tool to
manipulate a global counter with thread-safety ensured. Each thread
would declare its thread-local cshared type, which would point to a
global counter.
Each thread can then add/substract value to their owned thread-local
cshared instance via cshared_add(). If the difference exceed a
configured limit, either positively or negatively, the global counter is
updated and thread-local instance is reset to 0. Each thread can safely
read the global counter value using cshared_read().
Congestion window is limit by a minimal and maximum values which can
never be exceeded. Min value is hardcoded to 2 datagrams as recommended
by the specification. Max value is specified via haproxy configuration.
These values must be respected each time the congestion window size is
adjusted. However, in some rare occasions, limit were not always
enforced. Fix this by implementing wrappers to set or increment the
congestion window. These functions ensure limits are always applied
after the operation.
Additionnally, wrappers also ensure that if window reached a new maximum
value, it is saved in <cwnd_last_max> field.
This should be backported up to 2.6, after a brief period of
observation.
Write minor adjustments to QUIC BBR functions. The objective is to
centralize every modification of path cwnd field.
No functional change. This patch will be useful to simplify
implementation of global QUIC Tx memory usage limitation.
There was some possible confusion between fields related to congestion
window size min and max limit which cannot be exceeded, and the maximum
value previously reached by the window.
Fix this by adopting a new naming scheme. Enforced limit are now renamed
<limit_max>/<limit_min>, while the previously reached max value is
renamed <cwnd_last_max>.
This should be backported up to 3.1.
The account creation was mistakenly ending the task instead of being
wakeup for the NewOrder state, it was preventing the creation of the
certificate, however the account was correctly created.
To fix this, only the jump to the end label need to be remove, the
standard leaving codepath of the function will allow to be wakeup.
No backport needed.
TCP_NOTSENT_LOWAT is very convenient as it indicates when to report
EAGAIN on the sending side. It takes a margin on top of the estimated
window, meaning that it's no longer needed to store too many data in
socket buffers. Instead there's just enough to fill the send window
and a little bit of margin to cover the scheduling time to restart
sending. Experiments on a 100ms network have shown a 10-fold reduction
in the memory used by socket buffers by just setting this value to
tune.bufsize, without noticing any performance degradation. Theoretically
the responsiveness on multiplexed protocols such as H2 should also be
improved.
The ping frame's pattern must be written at offset 9 (frame header
length), not 8. This was added in 3.2 with commit 4dcfe098a6 ("MINOR:
mux-h2: prepare to support PING emission"), so no backport is needed.
