New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
Using "halog -c" is still something quite common to perform on logs,
but unfortunately since the recent added controls, it was sensibly
slowed down due to the parsing of the accept date field.
Now we use a specific loop for the case where nothing is needed from
the input, and this sped up the line counting by 2.5x. A 2.4 GHz Xeon
now counts lines at a rate of 2 GB of logs per second.
This pattern previously was limited to type IP. With the new header
extraction function, it becomes possible to extract strings, so that
the header can be returned as a string. This will not change anything
to existing configs, as string will automatically be converted to IP
when needed. However, new configs will be able to use IPv6 addresses
from headers in stick-tables, as well as stick on any non-IP header
(eg: host, user-agent, ...).
The new function does not return IP addresses but header values instead,
so that the caller is free to make what it want of them. The conversion
is not quite clean yet, as the previous test which considered that address
0.0.0.0 meant "no address" is still used. A different IP parsing function
should be used to take this into account.
Now strings and data blocks are stored in the temp_pattern's chunk
and matched against this one.
The rdp_cookie currently makes extensive use of acl_fetch_rdp_cookie()
and will be a good candidate for the initial rework so that ACLs use
the patterns framework and not the other way around.
IPv4 and IPv6 addresses are now stored into temp_pattern instead of
the dirty hack consisting into storing them into the consumer's target
address.
Some refactoring should now be possible since the methods used to fetch
source and destination addresses are similar between patterns and ACLs.
All ACL fetches which return integer value now store the result into
the temporary pattern struct. All ACL matches which rely on integer
also get their value there.
Note: the pattern data types are not set right now.
Till now the pattern data integer type was unsigned without any
particular reason. In order to make ACLs use it, we must switch it
to signed int instead.
This function was only used to call chunk_init_len() from another chunk,
which in the end consists in simply assigning the source chunk to the
destination chunk. Let's remove this indirection to make the code clearer.
Anyway it was the only place such a function was used.
This is 1.5-specific. It causes issues with transparent source binding involving
hdr_ip. We must not try to bind() to a foreign address when the family is not set,
and we must set the family when an address is set.
By default we disable TCP quick-acking on HTTP requests so that we
avoid sending a pure ACK immediately followed by the HTTP response.
However, if the client sends an incomplete request in a short packet,
its TCP stack might wait for this packet to be ACKed before sending
the rest of the request, delaying incoming requests by up to 40-200ms.
We can detect this undesirable situation when parsing the request :
- if an incomplete request is received
- if a full request is received and uses chunked encoding or advertises
a content-length larger than the data available in the buffer
In these situations, we re-enable TCP quick-ack if we had previously
disabled it.
Server Name Indication (SNI) is a TLS extension which makes a client
present the name of the server it is connecting to in the client hello.
It allows a transparent proxy to take a decision based on the beginning
of an SSL/TLS stream without deciphering it.
The new ACL "req_ssl_sni" matches the name extracted from the TLS
handshake against a list of names which may be loaded from a file if
needed.
When splice() returns EAGAIN, on old kernels it could be caused by a read
shutdown which was not detected. Due to this behaviour, we had to fall
back to recv(), which in turn says if it's a real EAGAIN or a shutdown.
Since this behaviour was fixed in 2.6.27.14, on more recent kernels we'd
prefer to avoid the fallback to recv() when possible. For this, we set a
variable the first time splice() detects a shutdown, to indicate that it
works. We can then rely on this variable to adjust our behaviour.
Doing this alone increased the overall performance by about 1% on medium
sized objects.
First, it's a waste not to call chk_snd() when spliced data are available,
because the pipe can almost always be transferred into the outgoing socket
buffers. Starting from now, when we splice data in, we immediately try to
send them. This results in less pipes used, and possibly less kernel memory
in use at once.
Second, if a pipe cannot be transferred into the outgoing socket buffers,
it means this buffer is full. There's no point trying again then, as space
will almost never be available, resulting in a useless syscall returning
EAGAIN.
(from ebtree 6.0.7)
Julien Thomas provided a reproducible test case where a string lookup
could return the wrong node. The issue is caused by the jump to a node
which contains less bit in common than the previous node, making the
string_equal_bits() function return -1. We must not remember more bits
than the number on the node, otherwise we can be tempted to trust them
while they can change while running down.
For a valid test case, enter : "0", "WW", "W", "S", and lookup "W".
Previously, "S" was returned.
Note: string-based ebtrees are used in haproxy in ACL, peers and
stick-tables. ACLs are not affected because all patterns are
interchangeable. stick-tables are not affected because lookups are
performed using ebmb_lookup(). Only peers might be affected though
it is not easy to infirm or confirm the issue.
(cherry picked from commit dd47a54103597458887d3cc8414853a541aee9c1)
(from ebtree 6.0.7)
root_right was wrongly initialized first to <root> which is not the same
type, to be later initialized to root->b[EB_RGHT].
Let's simply remove the wrong and useless initialization.
(cherry picked from commit e63a0c2f56369b52c4d00221d83c2c4569605c06)
(from ebtree 6.0.7)
This typo has been there since we introduced duplicates. A "struct eb_troot *"
which apparently the compiler doesn't complain about while it is never declared
anywhere. Amazing...
(cherry picked from commit 2879648db5d32cf009ae571cb0e8e1df75152281)
(from ebtree 6.0.6)
This version is mainly aimed at clarifying the fact that the ebtree license
is LGPL. Some files used to indicate LGPL and other ones GPL, while the goal
clearly is to have it LGPL. A LICENSE file has also been added.
No code is affected, but it's better to have the local tree in sync anyway.
(cherry picked from commit 24dc7cca051f081600fe8232f33e55ed30e88425)
(from ebtree 6.0.6)
Care has been taken not to make the code bigger (it even got smaller
due to a possible simplification).
(cherry picked from commit 7a2c1df646049c7daac52677ec11ed63048cd150)
Daniel Rankov reported that "option nolinger" is inefficient on backends.
The reason is that it is set on the file descriptor only, which does not
prevent haproxy from performing a clean shutdown() before closing. We must
set the flag on the stream_interface instead if we want an RST to be emitted
upon active close.
In commit 4b517ca93a (MEDIUM: buffers:
add some new primitives and rework existing ones), we forgot to check
if buffer_max_len() < l.
No backport is needed.
A number of primitives were missing for buffer management, and some
of them were particularly awkward to use. Specifically, the functions
used to compute free space could not always be used depending what was
wrapping in the buffers. Some documentation has been added about how
the buffers work and their properties. Some functions are still missing
such as a buffer replacement which would support wrapping buffers.
This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
Up to now, if a cookie value was specified on a server when the proxy was
in TCP mode, it would cause a fatal error. Now we only report a warning,
since the cookie will be ignored. This makes it easier to generate configs
from scripts.
Ludovic Levesque reported and diagnosed an annoying bug. When a server is
configured to track another one and has a slowstart interval set, it's
assigned a minimal weight when the tracked server goes back up but keeps
this weight forever.
This is because the throttling during the warmup phase is only computed
in the health checking function.
After several attempts to resolve the issue, the only real solution is to
split the check processing task in two tasks, one for the checks and one
for the warmup. Each server with a slowstart setting has a warmum task
which is responsible for updating the server's weight after a down to up
transition. The task does not run in othe situations.
In the end, the fix is neither complex nor long and should be backported
to 1.4 since the issue was detected there first.
When reading the code, the "tracked" member of a server makes one
think the server is tracked while it's the opposite, it's a pointer
to the server being tracked. This is particularly true in constructs
such as :
if (srv->tracked) {
Since it's the second time I get caught misunderstanding it, let's
rename it to "track" to avoid the confusion.
Baptiste Assmann reported that a config where a non-existing peers
section is referenced by a stick-table causes a segfault after displaying
the error. This is caused by the freeing of the peers. Setting it to NULL
after displaying the error fixes the issue.
For a long time, the max number of headers was taken as a part of the buffer
size. Since the header size can be configured at runtime, it does not make
much sense anymore.
Nothing was making it necessary to have a static value, so let's turn this into
a tunable with a default value of 101 which equals what was previously used.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
By default, pipes are the default size for the system. But sometimes when
using TCP splicing, it can improve performance to increase pipe sizes,
especially if it is suspected that pipes are not filled and that many
calls to splice() are performed. This has an impact on the kernel's
memory footprint, so this must not be changed if impacts are not understood.
Struct sockaddr_storage is huge (128 bytes) and severely impacts the
cache. It also displaces other struct members, causing them to have
larger relative offsets. By moving these few occurrences to the end
of the structs which host them, we can reduce the code size by no less
than 2 kB !
When prefix and indirect are used together, a client which connects to
a server with a cookie will never get any cookie update from this server,
which will be removed by the "indirect" option.
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
Nick Chalk reported that a connection to a server which has no port specified
used twice the port number. The reason is that the port number was taken from
the wrong part of the address, the client's destination address was used as the
base port instead of the server's configured address.
Thanks to Nick for his helpful diagnostic.
This patch introduces hdr_len, path_len and url_len for matching these
respective parts lengths against integers. This can be used to detect
abuse or empty headers.
Commit 588bd4 fixed header parsing so that trailing spaces were not part
of the returned string. Unfortunately, if a header only had spaces, the
last spaces were trimmed past the beginning of the value, causing a negative
length to be returned.
A quick code review shows that there should be no impact since the only
places where the vlen is used are either compared to a specific value or
with explicit contents (eg: digits).
This must be backported to 1.4.
