Now that the tgid stored in the stats file has been increased to 16bits
by commit 022cb3ab7fdce74de2cf24bea865ecf7015e5754, don't forget to
increase the variable size when reading it from the file, too.
This should have no impact given the maximum thread group limit is still
32.
Increase the size of the stored tgid in the stat file from 8bits to
32bits, so that we can have more than 256 thread group. 65536 should be
enough for some time.
This bumps thet stat file minor version, as the structure changes.
Instead of always allocating MAX_TGROUPS members, allocate them
dynamically, using the number of thread groups we'll use, so that
increasing MAX_TGROUPS will not have a huge impact on the structure
size.
This flag is used as of commit dcce9369129f6ca9b8eed6b451c0e20c226af2e3
("MINOR: connections: Add a new CO_FL_SSL_NO_CACHED_INFO flag"). This patch
should be backported to 3.3. Apparently dcce9369129 has been backported
to 3.2 and 3.1 already, with that change already applied, so no need for a
backport there.
The fc_xxx info that are retrieved over tcp_info could currently not
be accessed before a stream is created due to a test that verified the
existence of a stream. The rationale here was that the function works
both for frontend and backend. Let's always retrieve these info from
the session for the frontend case so that it now becomes possible to
set variables at connection/session time. The doc did not mention this
limitation so this could almost be considered as a bug.
Some timers, like the handshake timer, are stored in the session and are
only copied to the logs struct when a stream is created. But this means
we can't measure it without a stream, nor store it once for all in a
variable at session creation time. Let's extend the sample fetch function
to retrieve it from the session when no stream is present. The doc did not
mention this limitation so this could almost be considered as a bug.
It was reported in GH #2956 and more recently in GH #3235 that some
hashes are way too slow. The former triggers watchdog warnings during
checks, the second sees the config parsing take 20 seconds. This is
always due to the use of hash algorithms that are not suitable for use
in low-latency environments like web. They might be fine for a local
auth though. The difficulty, as explained by Philipp Hossner, is that
developers are not aware of this cost and adopt this without suspecting
any side effect.
The proposal here is to measure the crypt() call time and emit a warning
if it takes more than 10ms (which is already extreme). This was tested
by Philipp and confirmed to catch his case.
This is marked medium as it might start to report warnings on config
suffering from this problem without ever detecting it till now.
Patch dba4fd24 ("MEDIUM: ssl/ech: config and load keys") introduced
ECH configuration for bind lines, but the QUIC configuration parsers
still suffers from not using the same code as the TCP/TLS one, so the
init for QUIC was missed.
Must be backported in 3.3.
The ECH job still fails to compile since the openssl 4.0 deprecated
functions were not removed yet. Let's remove ERR=1 temporarly.
We do know that there's a regression in OpenSSL 4.0 with these
reg-tests though:
Error: # top TEST reg-tests/ssl/set_ssl_crlfile.vtc FAILED (0.219) exit=2
Error: # top TEST reg-tests/ssl/set_ssl_cafile.vtc FAILED (0.236) exit=2
Error: # top TEST reg-tests/quic/set_ssl_crlfile.vtc FAILED (0.196) exit=2
OpenSSL changed the output from "Server Temp Key" in prior versions to
"Peer Temp Key" in recent ones.
a39dc27c25
It looks like it affects OpenSSL >=3.5.0
This broke the reg-test for e.g. Debian 13 builds, using OpenSSL 3.5.1
Fixes bug #3238
Could be backported in every branches.
Signed-off-by: Christian Ruppert <idl0r@qasl.de>
Discussed in issue #3187, the CLI help is confusing for the "show table"
command as it seems that the argument is mandatory.
This patch adds the arguments between square brackets to remove the
confusion.
In GH issue #3226, Sergey Fedorov (@barracuda156) reported that since
commit 10c14a1ed0 ("MINOR: proto_sockpair: send_fd_uxst: init iobuf,
cmsghdr, cmsgbuf to zeros"), macOS 10.6.8 with gcc 14.3.0 doesn't build
anymore:
src/proto_sockpair.c: In function 'send_fd_uxst':
src/proto_sockpair.c:246:49: error: variable-sized object may not be initialized except with an empty initializer
246 | char cmsgbuf[CMSG_SPACE(sizeof(int))] = {0};
| ^
src/proto_sockpair.c:247:45: error: variable-sized object may not be initialized except with an empty initializer
247 | char buf[CMSG_SPACE(sizeof(int))] = {0};
| ^
Upon investigation, it appears that the CMSG_SPACE() macro on this OS
looks too complex for gcc to consider it as a constant, so it takes
these buffers for variable-length arrays and cannot initialize them.
Let's move to a simple memset() instead, which Sergey confirmed fixes
the problem.
This needs to be backported as far as 3.1. Thanks to Sergey for the
report, the bisect and testing the fix.
This patch covers issue https://github.com/haproxy/haproxy/issues/3221.
The parser for the "userlist" section did not use the standard keyword
registration mechanism. Instead, it relied on a series of strcmp()
comparisons to identify keywords such as "group" and "user".
This had two main drawbacks:
1. The keywords were not discoverable by the "-dKall" dump option,
making it difficult for users to see all available keywords for the
section.
2. The implementation was inconsistent with the parsers for other
sections, which have been progressively refactored to use the
standard cfg_kw_list infrastructure.
This patch refactors the userlist parser to align it with the project's
standard conventions.
The parsing logic for the "group" and "user" keywords has been extracted
from the if/else block in cfg_parse_users() into two new dedicated
functions:
- cfg_parse_users_group()
- cfg_parse_users_user()
These two keywords are now registered via a dedicated cfg_kw_list,
making them visible to the rest of the HAPorxy ecosystem, including the
-dKall dump.
When a unknown keyword was used in the "userlist" section, the error was
mentioning the "users" section, instead of "userlist".
Could be backported in every branches.
New gcc and clang versions from fedora rawhide seems to use the C23
standard by default. This version changes the definition of some
string.h functions, which now return a const char * instead of a char *.
src/tools.c: In function ‘fgets_from_mem’:
src/tools.c:7200:17: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
7200 | new_pos = memchr(*position, '\n', size);
| ^
Strangely, -Wdiscarded-qualifiers does not seem to catch all the
memchr.
Should fix issue #3228.
This could be backported in previous versions.
New gcc and clang versions from fedora rawhide seems to use the C23
standard by default. This version changes the definition of some
string.h functions, which now return a const char * instead of a char *.
src/ssl_sock.c: In function ‘SSL_CTX_keylog’:
src/ssl_sock.c:4475:17: error: assignment discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
4475 | lastarg = strrchr(line, ' ');
Strangely, -Wdiscarded-qualifiers does not seem to catch all the
strrchr.
Should fix issue #3228.
This could be backported in previous versions.
Released version 3.4-dev2 with the following main changes :
- BUG/MEDIUM: mworker/listener: ambiguous use of RX_F_INHERITED with shards
- BUG/MEDIUM: http-ana: Properly detect client abort when forwarding response (v2)
- BUG/MEDIUM: stconn: Don't report abort from SC if read0 was already received
- BUG/MEDIUM: quic: Don't try to use hystart if not implemented
- CLEANUP: backend: Remove useless test on server's xprt
- CLEANUP: tcpcheck: Remove useless test on the xprt used for healthchecks
- CLEANUP: ssl-sock: Remove useless tests on connection when resuming TLS session
- REGTESTS: quic: fix a TLS stack usage
- REGTESTS: list all skipped tests including 'feature cmd' ones
- CI: github: remove openssl no-deprecated job
- CI: github: add a job to test the master branch of OpenSSL
- CI: github: openssl-master.yml misses actions/checkout
- BUG/MEDIUM: backend: Do not remove CO_FL_SESS_IDLE in assign_server()
- CI: github: use git prefix for openssl-master.yml
- BUG/MEDIUM: mux-h2: synchronize all conditions to create a new backend stream
- REGTESTS: fix error when no test are skipped
- MINOR: cpu-topo: Turn the cpu policy configuration into a struct
- MEDIUM: cpu-topo: Add a "threads-per-core" keyword to cpu-policy
- MEDIUM: cpu-topo: Add a "cpu-affinity" option
- MEDIUM: cpu-topo: Add a new "max-threads-per-group" global keyword
- MEDIUM: cpu-topo: Add the "per-thread" cpu_affinity
- MEDIUM: cpu-topo: Add the "per-ccx" cpu_affinity
- BUG/MINOR: cpu-topo: fix -Wlogical-not-parentheses build with clang
- DOC: config: fix number of values for "cpu-affinity"
- MINOR: tools: add a secure implementation of memset
- MINOR: mux-h2: add missing glitch count for non-decodable H2 headers
- MINOR: mux-h2: perform a graceful close at 75% glitches threshold
- MEDIUM: mux-h1: implement basic glitches support
- MINOR: mux-h1: perform a graceful close at 75% glitches threshold
- MEDIUM: cfgparse: acknowledge that proxy ID auto numbering starts at 2
- MINOR: cfgparse: remove useless checks on no server in backend
- OPTIM/MINOR: proxy: do not init proxy management task if unused
- MINOR: patterns: preliminary changes for reorganization
- MEDIUM: patterns: reorganize pattern reference elements
- CLEANUP: patterns: remove dead code
- OPTIM: patterns: cache the current generation
- MINOR: tcp: add new bind option "tcp-ss" to instruct the kernel to save the SYN
- MINOR: protocol: support a generic way to call getsockopt() on a connection
- MINOR: tcp: implement the get_opt() function
- MINOR: tcp_sample: implement the fc_saved_syn sample fetch function
- CLEANUP: assorted typo fixes in the code, commits and doc
- BUG/MEDIUM: cpu-topo: Don't forget to reset visited_ccx.
- BUG/MAJOR: set the correct generation ID in pat_ref_append().
- BUG/MINOR: backend: fix the conn_retries check for TFO
- BUG/MINOR: backend: inspect request not response buffer to check for TFO
- MINOR: net_helper: add sample converters to decode ethernet frames
- MINOR: net_helper: add sample converters to decode IP packet headers
- MINOR: net_helper: add sample converters to decode TCP headers
- MINOR: net_helper: add ip.fp() to build a simplified fingerprint of a SYN
- MINOR: net_helper: prepare the ip.fp() converter to support more options
- MINOR: net_helper: add an option to ip.fp() to append the TTL to the fingerprint
- MINOR: net_helper: add an option to ip.fp() to append the source address
- DOC: config: fix the length attribute name for stick tables of type binary / string
- MINOR: mworker/cli: only keep positive PIDs in proc_list
- CLEANUP: mworker: remove duplicate list.h include
- BUG/MINOR: mworker/cli: fix show proc pagination using reload counter
- MINOR: mworker/cli: extract worker "show proc" row printer
- MINOR: cpu-topo: Factorize code
- MINOR: cpu-topo: Rename variables to better fit their usage
- BUG/MEDIUM: peers: Properly handle shutdown when trying to get a line
- BUG/MEDIUM: mux-h1: Take care to update <kop> value during zero-copy forwarding
- MINOR: threads: Avoid using a thread group mask when stopping.
- MINOR: hlua: Add support for lua 5.5
- MEDIUM: cpu-topo: Add an optional directive for per-group affinity
- BUG/MEDIUM: mworker: can't use signals after a failed reload
- BUG/MEDIUM: stconn: Move data from <kip> to <kop> during zero-copy forwarding
- DOC: config: fix a few typos and refine cpu-affinity
- MINOR: receiver: Remove tgroup_mask from struct shard_info
- BUG/MINOR: quic: fix deprecated warning for window size keyword
QUIC configuration was cleaned up in the previous release. Several
global keyword names were changed to unify the configuration. For each
of them the older keyword is marked as deprecated, with a warning to
mention the newer alternative.
This patch fixes the warning for 'tune.quic.frontend.default-max-size'
as the alternative proposed was not correct. The proper value now is
'tune.quic.fe.cc.max-win-size'.
This must be backported up to 3.3.
The only purpose from tgroup_mask seems to be to calculate how many
tgroups share the same shard, but this is an information we can
calculate differently, we just have to increment the number when a new
receiver is added to the shard, and decrement it when one is detached
from the shard. Removing thread group masks will allow us to increase
the maximum number of thread groups past 64.
There were two typos in the recently updated parts about per-group.
Also, change the commas to ':' after the options values, as sometimes
it would be confusing. Last, place quotes around keyword names so that
they're explicitly referred to as language keywords. No backport is
needed.
The <kip> of producer was not forwarded to <kop> of consumer when zero-copy
data forwarding was tried. Because of the issue, the chunking of emitted H1
messages could be invalid.
To fix the bug, sc_ep_fwd_kip() must be called at this stage.
This fix is related to the previous one (529a8dbfb "BUG/MEDIUM: mux-h1: Take
care to update <kop> value during zero-copy forwarding"). Both are required
to fully fix the issue #3230.
This patch must be backported to 3.3.
In issue #3229 it was reported that the master couldn't reload after a
failed reload following a wrong configuration.
It is still possible to do a reload using the "reload" command of the
master CLI. But every signals are blocked.
The problem was introduced in 709cde6d0 ("BUG/MEDIUM: mworker: signals
inconsistencies during startup and reload") which fixes the blocking of
signals during the reload.
However the patch missed a case, indeed, the
run_master_in_recovery_mode() is not being called when the worker failed
to parse the configuration, it is only failing when the master is
failing.
To handle this case, the mworker_unblock_signals() function must be
called upon mworker_on_new_child_failure(). But since this is called in
an haproxy signal handler it would mess with the signals.
Instead, the patch adds a task which is started by the signal handler,
and restores the signals outside of it.
This must be backported as far as 3.1.
When using per-group affinity, add an optional new directive. It accepts
the values of "auto", where when multiple thread groups are created, the
available CPUs are split equally across the groups, and is the new
default, and "loose", where all groups are bound to all available CPUs,
this is the old default.
Lua 5.5 adds an extra argument to lua_newstate(). Since there are
already a few other ifdefs in hlua.c checking for the Lua version,
and there's a single call place, let's do the same here. This should
be safe for backporting if needed.
Signed-off-by: Mike Lothian <mike@fireburn.co.uk>
Remove the "stopped_tgroup_mask" variable, that indicated which thread
groups were stopping, and instead just use "stopped_tgroups", a counter
indicating how many thread groups are stopping. We want to remove all
thread group masks, so that we can increase the maximum number of thread
groups past 64.
Since the extra field was removed from the HTX structure, a regression was
introduced when forwarding of chunked messages. The <kop> value was not
decreased as it should be when data were sent via the zero-copy
forwarding. Because of this bug, it was possible to announce a chunk size
larger than the chunk data sent.
To fix the bug, an helper function was added to properly update the <kop>
value when a chunk size is emitted. This function is now called when new
chunk is announced, including during zero-copy forwarding.
As a workaround, "tune.disable-zero-copy-forwarding" or just
"tune.h1.zero-copy-fwd-send off" can be set in the global section.
This patch should fix the issue #3230. It must be backported to 3.3.
When a shutdown was reported to a peer applet, the event was not properly
handled if it failed to receive data. The function responsible to get data
was exiting too early if the applet buffer was empty, without testing the
sedesc status. Because of this issue, it was possible to have frozen peer
applets. For instance, it happend on client timeout. With too many frozen
applets, it was possible to reach the maxconn.
This patch should fix the issue #3234. It must be backported to 3.3.
Rename "visited_tsid" and "visited_ccx" to "touse_tsid" and
"touse_ccx". They are not there to remember which tsid/ccx we
alreaday visited, contrarily to visited_ccx_set and
visited_cl_set, they are there to know which tsid/ccx we should
use, so make that clear.
Introduce cli_append_worker_row() to centralize formatting of a single
worker row. Also, replace duplicated row-printing code in both current
and old workers loops with the helper. Motivation: Reduces LOC and
improves readability by removing duplication.
After commit 594408cd612b5 ("BUG/MINOR: mworker/cli: 'show proc' is limited
by buffer size"), related to ticket #3204, the "show proc" logic
has been fixed to be able to print more than 202 processes. However, this
fix can lead to the omission of entries in case they have the same
timestamp.
To fix this, we use the unique reload counter instead of the timestamp.
On partial flush, set ctx->next_reload = child->reloads.
On resume skip entries with child->reloads >= ctx->next_reload.
Finally, we clear ctx->next_reload at the end of a complete dump so
subsequent show proc starts from the top.
Could be backported in all stable branches.
Change mworker_env_to_proc_list() to if (child->pid > 0) before
LIST_APPEND, avoiding invalid PIDs (0/-1) in the process list.
This has no functional impact beyond stricter validation and it aligns
with existing kill safeguards.
The stick-table doc was reworked and moved in 3.2 with commit da67a89f3
("DOC: config: move stick-tables and peers to their own section"), however
the optional length attribute for binary/string types was mistakenly
spelled "length" while it's "len".
This must be backported to 3.2.
It can make sense to support extra components in the fingerprint to ease
configuration, so let's change the 0/1 value to a bit field. We also turn
the current 1 (TCP options list) to 2 so that we'll reuse 1 for the TTL.
Here we collect all the stuff that depends on the sender's settings,
such as TOS, IP version, TTL range, presence of DF bit or IP options,
presence of DATA in the SYN, CWR+ECE flags, TCP header length, wscale,
initial window, mss, as well as the list of TCP extension kinds. It's
obviously fairly limited but can allows to avoid blacklisting certain
valid clients sharing the same IP address as a misbehaving one.
It supports both a short and a long mode depending on the argument.
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
This adds the following converters, used to decode fields
in an incoming tcp header:
tcp.dst, tcp.flags, tcp.seq, tcp.src, tcp.win,
tcp.options.mss, tcp.options.tsopt, tcp.options.tsval,
tcp.options.wscale, tcp.options_list,
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
This adds a few converters that help decode parts of IP packets:
- ip.data : returns the next header (typically TCP)
- ip.df : returns the dont-fragment flags
- ip.dst : returns the destination IPv4/v6 address
- ip.hdr : returns only the IP header
- ip.proto: returns the upper level protocol (udp/tcp)
- ip.src : returns the source IPv4/v6 address
- ip.tos : returns the TOS / TC field
- ip.ttl : returns the TTL/HL value
- ip.ver : returns the IP version (4 or 6)
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
This adds a few converters that help decode parts of ethernet frame
headers:
- eth.data : returns the next header (typically IP)
- eth.dst : returns the destination MAC address
- eth.hdr : returns only the ethernet header
- eth.proto: returns the ethernet proto
- eth.src : returns the source MAC address
- eth.vlan : returns the VLAN ID when present
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
In 2.6, do_connect_server() was introduced by commit 0a4dcb65f ("MINOR:
stream-int/backend: Move si_connect() in the backend scope") and changed
the approach to work with a stream instead of a stream-interface. However
si_oc(si) was wrongly turned to &s->res instead of &s->req, which breaks
TFO by always inspecting the response channel to figure whether there are
data pending.
This fix can be backported to all versions till 2.6.
In 2.6, the retries counter on a stream was changed from retries left
to retries done via commit 731c8e6cf ("MINOR: stream: Simplify retries
counter calculation"). However, one comparison fell through the cracks
in order to detect whether or not we can use TFO (only first attempt),
resulting in TFO never working anymore.
This may be backported to all versions till 2.6.
We want to reset visited_ccx, as introduced by commit
8aef5bec1ef57eac449298823843d6cc08545745, each time we run the loop,
otherwise the chances of its content being correct are very low, and
will likely end up being bound to the wrong threads.
This was reported in github issue #3224.
This function retrieves the copy of a SYN packet that the system has
kept for us when bind option "tcp-ss" was set to 1 or above. It's
recommended to copy it to a local variable because it will be freed
after being read. It allows to inspect all parts of an incoming SYN
packet, provided that it was preserved (e.g. not possible with SYN
cookies). The doc provides examples of how to use it.
It's regularly needed to call getsockopt() on a connection, but each
time the calling code has to do all the job by itself. This commit adds
a "get_opt()" callback on the protocol struct, that directly calls
getsockopt() on the connection's FD. A generic implementation for
standard sockets is provided, though QUIC would likely require a
different approach, or maybe a mapping. Due to the overlap between
IP/TCP/socket option values, it is necessary for the caller to indicate
both the level and the option. An abstraction of the level could be
done, but the caller would nonetheless have to know the optname, which
is generally defined in the same include files. So for now we'll
consider that this callback is only for very specific use.
The levels and optnames are purposely passed as signed ints so that it
is possible to further extend the API by using negative levels for
internal namespaces.
