Make all the congestion support the maximum congestion control window
set by configuration. There is nothing special to explain. For each
each algo, each time the window is incremented it is also bounded.
Add a new ->max_cwnd member to bind_conf struct to store the maximum
congestion control window value for each QUIC binding.
Modify the "quic-cc-algo" keyword parsing to add an optional parameter
to its value: the maximum congestion window value between parentheses
as follows:
ex: quic-cc-algo cubic(10m)
This value must be bounded, greater than 10k and smaller than 1g.
This bug was introduced with 29b76ca ("BUG/MEDIUM: server/log: "mode log"
after server keyword causes crash ")
Indeed, we cannot safely rely on addr_proto being set when str2sa_range()
returns in parse_server() (even if SRV_PARSE_PARSE_ADDR is set), because
proto lookup might be bypassed when FQDN addresses are involved.
Unfortunately, the above patch wrongly assumed that proto would always
be set when SRV_PARSE_PARSE_ADDR was passed to parse_server() (so when
str2sa_range() was called), resulting in invalid postparsing checks being
performed, which could as well lead to crashes with log backends
("mode log" set) because some postparsing init was skipped as a result of
proto not being set and this wasn't expected later in the init code.
To fix this, we now make use of the previous patch to perform server's
address compatibility checks on hints that are always set when
str2sa_range() succesfully returns.
For log backend, we're also adding a complementary test to check if the
address family is of expected type, else we report an error, plus we're
moving the postinit logic in log api since _srv_check_proxy_mode() is
only meant to check proxy mode compatibility and we were abusing it.
This patch depends on:
- "MINOR: tools: make str2sa_range() directly return type hints"
No backport required unless 29b76ca gets backported.
str2sa_range() already allows the caller to provide <proto> in order to
get a pointer on the protocol matching with the string input thanks to
5fc9328a ("MINOR: tools: make str2sa_range() directly return the protocol")
However, as stated into the commit message, there is a trick:
"we can fail to return a protocol in case the caller
accepts an fqdn for use later. This is what servers do and in this
case it is valid to return no protocol"
In this case, we're unable to return protocol because the protocol lookup
depends on both the [proto type + xprt type] and the [family type] to be
known.
While family type might not be directly resolved when fqdn is involved
(because family type might be discovered using DNS queries), proto type
and xprt type are already known. As such, the caller might be interested
in knowing those address related hints even if the address family type is
not yet resolved and thus the matching protocol cannot be looked up.
Thus in this patch we add the optional net_addr_type (custom type)
argument to str2sa_range to enable the caller to check the protocol type
and transport type when the function succeeds.
It's common to see process_stream() being woken up by wake_expired_tasks
in the profiling output, without knowing which timeout was set to cause
this. By making it possible to record the call places of task_queue()
and task_schedule(), and by making wake_expired_tasks() explicitly not
replace it, we'll be able to know which task_queue() or task_schedule()
was triggered for a given wakeup.
For example below:
process_stream 51200 311.4ms 6.081us 34.59s 675.6us <- run_tasks_from_lists@src/task.c:659 task_queue
process_stream 19227 70.00ms 3.640us 9.813m 30.62ms <- sc_notify@src/stconn.c:1136 task_wakeup
process_stream 6414 102.3ms 15.95us 8.093m 75.70ms <- stream_new@src/stream.c:578 task_wakeup
It's visible that it's the run_tasks_from_lists() which in fact applies
on the task->expire returned by the ->process() function itself.
This is used for tracing and profiling. By permitting to have a NULL
caller, we allow a caller to explicitly pass zero to state that the
current caller must not be replaced. This will soon be used by
wake_expired_tasks() to avoid replacing a caller in the expire loop.
QUIC connections are pushed manually into a dedicated listener queue
when they are ready to be accepted. This happens after handshake
finalization or on 0-RTT packet reception. Listener is then woken up to
dequeue them with listener_accept().
This patch comptabilizes the number of connections currently stored in
the accept queue. If reaching a certain limit, INITIAL packets are
dropped on reception to prevent further QUIC connections allocation.
This should help to preserve system resources.
This limit is automatically derived from the listener backlog. Half of
its value is reserved for handshakes and the other half for accept
queues. By default, backlog is equal to maxconn which guarantee that
there can't be no more than maxconn connections in handshake or waiting
to be accepted.
Implement a limit per listener for concurrent number of QUIC
connections. When reached, INITIAL packets for new connections are
automatically dropped until the number of handshakes is reduced.
The limit value is automatically based on listener backlog, which itself
defaults to maxconn.
This feature is important to ensure CPU and memory resources are not
consume if too many handshakes attempt are started in parallel.
Special care is taken if a connection is released before handshake
completion. In this case, counter must be decremented. This forces to
ensure that member <qc.state> is set early in qc_new_conn() before any
quic_conn_release() invocation.
Accounting is implemented for half open connections which represent QUIC
connections waiting for handshake completion. When reaching a certain
limit, Retry mechanism is automatically activated prior to instantiate
new connections.
The issue with this behavior is that two notions are mixed : QUIC
connection handshake phase and Retry which is mechanism against
amplification attacks. As such, only peer address validation should be
taken into account to activate Retry protection.
This patch chooses to reduce the scope of half_open_conn. Now only
connection waiting to validate the peer address are now accounted for.
Most notably, connections instantiated with a validated Retry token
check are not accounted.
One impact of this patch is that it should prevent to activate Retry
mechanism too early, in particular in case if multiple handshakes are
too slow. Another limitation should be implemented to protect against
this scenario.
When a new QUIC connection is created, server considers peer address as
not yet validated. The server must limit its sending up to 3 times the
content already received. This is a defensive measure to avoid flooding
a remote host victim of address spoofing.
This patch adjust the condition to consider the peer address as
validated. Two conditions are now considered :
* successful handling of a received HANDSHAKE packet. This was already
done before although implemented in a different way.
* validation of a Retry token. This was not considered prior this patch
despite RFC recommandation.
This patch also adjusts how a connection is internally labelled as using
a validated peer address. Before, above conditions were checked via
quic_peer_validated_addr(). Now, a flag QUIC_FL_CONN_PEER_VALIDATED_ADDR
is set to labelled this. It already existed prior this patch but was
only used for quic_cc_conn. This should now be more explicit.
This bug could be reproduced with -dMfail option and detected by libasan.
During the TLS secrets allocations, when failed, quic_tls_ctx_secs_free()
is called. It resets the already initialized secrets. Some were detected
as initialized when not, or with a non initialized length, which leads
to big "memset(0)" detected by libsasan.
Ensure that all the secrets are really initialized with correct lengths.
No need to be backported.
This was no reason not to release as soon as possible the TLS/SSL QUIC connection
context from quic_conn_release() before allocating a "closing connection" connection
(quic_cc_conn struct).
This patch sets the handshake task in heavy task mode when receiving in disorder
CRYPTO data which results in in order bufferized CRYPTO data. This is done
thanks to a non-contiguous buffer and from qc_handle_crypto_frm() after having
potentially bufferized CRYPTO data in this buffer.
qc_treat_rx_crypto_frms() is no more called from qc_treat_rx_pkts() but instead
this is where the task is set in heavy task mode. Consequently,
this is the job of qc_ssl_provide_all_quic_data() to call directly
qc_treat_rx_crypto_frms() to provide the in order bufferized CRYPTO data to the
TLS stack. As this function releases the non-contiguous buffer for the CRYPTO
data, if possible, there is no need to do that from qc_treat_rx_crypto_frms()
anymore.
Add a new pool for the CRYPTO data frames received in order.
Add ->rx.crypto_frms list to each encryption level to store such frames
when they are received in order from qc_handle_crypto_frm().
Also set the handshake task (qc_conn_io_cb()) in heavy task mode from
this function after having received such frames. When this task
detects that it is set in heavy mode, it calls qc_ssl_provide_all_quic_data()
newly implemented function to provide the CRYPTO data to the TLS task.
Modify quic_conn_enc_level_uninit() to release these CRYPTO frames
when releasing the encryption level they are in relation with.
IOBUF_FL_EOI iobuf flag is now set by the producer to notify the consumer
that the end of input was reached. Thanks to this flag, we can remove the
ugly ack in h2_done_ff() to test the opposite SE flags.
Of course, for now, it works and it is good enough. But we must keep in mind
that EOI is always forwarded from the producer side to the consumer side in
this case. But if this change, a new CO_RFL_ flag will have to be added to
instruct the producer if it can forward EOI or not.
In the mux-to-mux data forwarding, we now try, as far as possible to send at
least a buffer. Of course, if the consumer side is congested or if nothing
more can be received, we leave. But the idea is to retry to fast-forward
data if less than a buffer was forwarded. It is only performed for buffer
fast-forwarding, not splicing.
The idea behind this patch is to optimise the forwarding, when a first
forward was performed to complete a buffer with some existing data. In this
case, the amount of data forwarded is artificially limited because we are
using a non-empty buffer. But without this limitation, it is highly probable
that a full buffer could have been sent. And indeed, with H2 client, a
significant improvement was observed during our test.
To do so, .done_fastfwd() callback function must be able to deal with
interim forwards. Especially for the H2 mux, to remove H2_SF_NOTIFIED flags
on the H2S on the last call only. Otherwise, the H2 stream can be blocked by
itself because it is in the send_list. IOBUF_FL_INTERIM_FF iobuf flag is
used to notify the consumer it is not the last call. This flag is then
removed on the last call.
In 2.6-dev1, the method used to decide how many pool entries could be
released at once was revisited to support releases in batches. This was
done with commits 91a8e28f9 ("MINOR: pool: add a function to estimate
how many may be released at once") and 361e31e3f ("MEDIUM: pool: compute
the number of evictable entries once per pool").
The first commit takes care of the possible inconsistency between the
moment the allocated count and the used count are read, but unfortunately
fixed it the wrong way, by adjusting "used" to match "alloc" whenever it
was lower (i.e. almost always). This results in a nasty case which is that
as soon as the allocated value becomes higher than the estimated count of
needed entries, we end up returning pool->minavail, which causes very
small batches to be released, starting from commit 1513c5479 ("MEDIUM:
pools: release cached objects in batches").
The problem was further amplified in 2.9-dev3 with commit 7bf829ace
("MAJOR: pools: move the shared pool's free_list over multiple buckets")
because it now becomes possible for a thread to allocate from one bucket
and release into a few other different ones, causing an accumulation of
entries in that bucket.
The fix is trivial, simply adjust the alloc counter if the used one is
higher, before performing operations.
This must be backported to 2.6.
QUIC connections are accounted inside global sslconns. As with QUIC
actconn, it suffered from a similar issue if an intermediary allocation
failed inside qc_new_conn().
Fix this similarly by moving increment operation inside qc_new_conn().
Increment and error path are now centralized and much easier to
validate.
The consequences are similar to the actconn fix : on memory allocation
global sslconns may wrap, this time blocking any future QUIC or SSL
connections on the process.
This must be backported up to 2.6.
Recent fixes have shown <lra> and <fsb> uses were not prettu clear. So let's
try to improve documentation about these value. Especially when <lra> is
updated and how to used it.
In sc_need_room(), we compute the maximum room that can be requested to
restarted reading to be sure to be able to unblock the SC. At worst when the
buffer is emptied. Here, the buffer reserve is considered but it is an issue.
Counting the reserve can lead to a wicked bug with the H1 multiplexer, when
small amount of data are found at the end of the HTX buffer. In this case,
to not wrap, the H1 mux requests more room. It is an optim to be able to
resync the buffer with the consumer side and to be able to perform zero-copy
transfers. However, if this amount of data is smaller than the reserve and
if the consumer is congested, we fall in a loop because the wrong value is
used to request more room. The H1 mux continues to pretend there is not
enough space in the buffer, while the effective requested value is lower
than the free space in the buffer. While the consumer is congested and does
not consume these data, the is no way to stop the loop.
We can fix the function by removing the buffer reserve from the
computation. But it remains a dangerous decision to apply a max value on
room_needed. It is safer to require the caller must set a correct value. For
now, it is true. But at the end, it is totally unexepected to wait for more
room than an empty buffer can contain.
This patch must be backported to 2.8.
When receive or send expiration date of a stream-connector is retrieved, we
now automatically check if it may expire. If not, TICK_ETERNITY is returned.
The expiration dates of the frontend and backend stream-connectors are used
to compute the stream expiration date. This operation is performed at 2
places: at the end of process_stream() and in sc_notify() if the stream is
not woken up.
With this patch, there is no special changes for process_stream() because it
was already handled. It make thing a little simpler. However, it fixes
sc_notify() by avoiding to erroneously compute an expiration date in
past. This highly reduce the stream wakeups when there is contention on the
consumer side.
The bug was introduced with the commit 8073094bf ("NUG/MEDIUM: stconn:
Always update stream's expiration date after I/O"). It was an error to
unconditionnaly set the stream expiration data, without testing blocking
conditions on both SC.
This patch must be backported to 2.8.
When data are directly forwarded from a mux to the opposite one, we must not
forget to report send activity when data are successfully sent or report a
blocked send with data are blocked. It is important because otherwise, if
the transfer is quite long, longer than the client or server timeout, an
error may be triggered because the write timeout is reached.
H1, H2 and PT muxes are concerned. To fix the issue, The done_fastword()
callback now returns the amount of data consummed. This way it is possible
to update/reset the FSB data accordingly.
No backport needed.
This commit introduces a generic server-side parsing of type-value pair
arguments and allocation of a TLV list via a new keyword called
set-proxy-v2-tlv-fmt.
This allows to 1) forward any TLV type with the help of fc_pp_tlv,
2) generally, send out any TLV type and value via a log format expression.
To have this fully working the connection will need to be updated in
a follow-up commit to actually respect the new server TLV list.
default-server support has also been implemented.
In this patch, we add the possibility to declare on a table definition
("table" in peer section, or "stick-table" in proxy section) that we
want the remote/peer updates on that table to be pushed on a local
haproxy table in addition to the source table.
Consider this example:
|peers mypeers
| peer local 127.0.0.1:3334
| peer clust 127.0.0.1:3333
| table t1.local type string size 10m store server_id,server_key expire 30s
| table t1.clust type string size 10m store server_id,server_key write-to mypeers/t1.local expire 30s
With this setup, we consider haproxy uses t1.local as cache/local table
for read and write operations, and that t1.clust is a remote table
containing datas processed from t1.local and similar tables from other
haproxy peers in a cluster setup. The t1.clust table will be used to
refresh the local/cache one via the "write-to" statement.
What will happen, is that every time haproxy will see entry updates for
the t1.clust table: it will overwrite t1.local table with fresh data and
will update the entry expiration timer. If t1.local entry doesn't exist
yet (key doesn't exist), it will automatically create it. Note that only
types that cannot be used for arithmetic ops will be handled, and this
to prevent processed values from the remote table from interfering with
computations based on values from the local table. (ie: prevent
cumulative counters from growing indefinitely).
"write-to" will only push supported types if they both exist in the source
and the target table. Be careful with server_id and server_key storage
because they are often declared implicitly when referencing a table in
sticking rules but it is required to declare them explicitly for them to
be pushed between a remote and a local table through "write-to" option.
Also note that the "write-to" target table should have the same type as
the source one, and that the key length should be strictly equal,
otherwise haproxy will raise an error due to the tables being
incompatibles. A table that is already being written to cannot be used
as a source table for a "write-to" target.
Thanks to this patch, it will now be possible to use sticking rules in
peer cluster context by using a local table as a local cache which
will be automatically refreshed by one or multiple remote table(s).
This commit depends on:
- "MINOR: stktable: stktable_init() sets err_msg on error"
- "MINOR: stktable: check if a type should be used as-is"
stick table types now have an extra bit named 'as_is' that allows us to
check if such type should be used as-is or if it may be involved in
arithmetic operations such as counters. This can be useful since those
types are not common and may require specific handling.
e.g.: stktable_data_types[data_type].as_is will be set to 1 if the type
cannot be used in arithmetic operations.
Simplify stick and store sticktable proxy rules postparsing by adding
a sticking rule entry resolve (postparsing) function.
This will ease code maintenance.
This new fetcher can be used to extract the list of cookie names from
Cookie request header or from Set-Cookie response header depending on
the stream direction. There is an optional argument that can be used
as the delimiter (which is assumed to be the first character of the
argument) between cookie names. The default delimiter is comma (,).
Note that we will treat the Cookie request header as a semi-colon
separated list of cookies and each Set-Cookie response header as
a single cookie and extract the cookie names accordingly.
Similar to the previous commit which check for maxconn before allocating
a QUIC connection, this patch checks for maxsslconn at the same step.
This is necessary as a QUIC connection cannot run without a SSL context.
This should be backported up to 2.6. It relies on the following patch :
"BUG/MINOR: ssl: use a thread-safe sslconns increment"
Increment actconn and check maxconn limit when a quic_conn is
instantiated. This is necessary because prior to this patch, quic_conn
instances where not counted. Global actconn was only incremented after
the handshake has been completed and the connection structure is
allocated.
The increment is done using increment_actconn() on INITIAL packet
parsing if a new connection is about to be created. If the limit is
reached, the allocation is cancelled and the INITIAL packet is dropped.
The decrement is done under quic_conn_release(). This means that
quic_cc_conn instances are not taken into account. This seems safe
enough because quic_cc_conn are only used for minimal usage.
The counterpart of this change is that maxconn must not be checked a
second time when listener_accept() is done over a QUIC connection. For
this, a new bind_conf flag BC_O_XPRT_MAXCONN is set for listeners when
maxconn is already counted by the lower layer. For the moment, it is
positionned only for QUIC listeners.
Without this patch, haproxy process could suffer from heavy memory/CPU
load if the number of concurrent handshake is high.
This patch is not considered a bug fix per-se. However, it has a major
benefit to protect against too many QUIC handshakes. As such, it should
be backported up to 2.6. For this, it relies on the following patch :
"MINOR: frontend: implement a dedicated actconn increment function"
Each time a new SSL context is allocated, global.sslconns is
incremented. If global.maxsslconn is reached, the allocation is
cancelled.
This procedure was not entirely thread-safe due to the check and
increment operations conducted at different stage. This could lead to
global.maxsslconn slightly exceeded when several threads allocate SSL
context while sslconns is near the limit.
To fix this, use a CAS operation in a do/while loop. This code is
similar to the actconn/maxconn increment for connection.
A new function increment_sslconn() is defined for this operation. For
the moment, only SSL code is using it. However, it is expected that QUIC
will also use it to count QUIC connections as SSL ones.
This should be backported to all stable releases. Note that prior to the
2.6, sslconns was outside of global struct, so this commit should be
slightly adjusted.
When a new frontend connection is instantiated, actconn global counter
is incremented. If global maxconn value is reached, the connection is
cancelled. This ensures that system limit are under control.
Prior to this patch, the atomic check/increment operations were done
directly into listener_accept(). Move them in a dedicated function
increment_actconn() in frontend module. This will be useful when QUIC
connections will be counted in actconn counter.
Now when calling ha_panic() with a thread still under malloc_trim(),
we'll set a new tainted flag to easily report it, and the output
trace will report that this condition happened and will suggest to
use no-memory-trimming to avoid it in the future.
William suggested that since we can detect the presence of Lua in the
stack, let's combine it with stuck detection to set a new pair of flags
indicating a stuck Lua context and a stuck Lua shared context.
Now, executing an infinite loop in a Lua sample fetch function with
yield disabled crashes with tainted=0xe40 if loaded from a lua-load
statement, or tainted=0x640 from a lua-load-per-thread statement.
In addition, at the end of the panic dump, we can check if Lua was
seen stuck and emit recommendations about lua-load-per-thread and
the choice of dependencies depending on the presence of threads
and/or shared context.
This will make it easier to know that the panic function was called,
for the occasional case where the dump crashes and/or the stack is
corrupted and not much exploitable. Now at least it will be sufficient
to check the tainted value to know that someone called ha_panic(), and
it will also be usable to condition extra analysis.
This function allows to safely map proxy mode to corresponding proto_mode
This will allow for easier code maintenance and prevent mixups between
proxy mode and proto mode.
In 9a74a6c ("MAJOR: log: introduce log backends"), a mistake was made:
it was assumed that the proxy mode was already known during server
keyword parsing in parse_server() function, but this is wrong.
Indeed, "mode log" can be declared late in the proxy section. Due to this,
a simple config like this will cause the process to crash:
|backend test
|
| server name 127.0.0.1:8080
| mode log
In order to fix this, we relax some checks in _srv_parse_init() and store
the address protocol from str2sa_range() in server struct, then we set-up
a postparsing function that is to be called after config parsing to
finish the server checks/initialization that depend on the proxy mode
to be known. We achieve this by checking the PR_CAP_LB capability from
the parent proxy to know if we're in such case where the effective proxy
mode is not yet known (it is assumed that other proxies which are implicit
ones don't provide this possibility and thus don't suffer from this
constraint).
Only then, if the capability is not found, we immediately perform the
server checks that depend on the proxy mode, else the check is postponed
and it will automatically be performed during postparsing thanks to the
REGISTER_POST_SERVER_CHECK() hook.
Note that we remove the SRV_PARSE_IN_LOG_BE flag because it was introduced
in the above commit and it is no longer relevant.
No backport needed unless 9a74a6c gets backported.
The two recent commits below each added one flag to h2c but omitted to
update the __APPEND_FLAG macro used by dev/flags so they are not
properly decoded:
3dd963b35 ("BUG/MINOR: mux-h2: fix http-request and http-keep-alive timeouts again")
68d02e5fa ("BUG/MINOR: mux-h2: make up other blocked streams upon removal from list")
This can be backported along with these commits.
Define a new function srv_add_to_avail_list(). This function is used to
centralize connection insertion in available tree. It reuses a BUG_ON()
statement to ensure the connection is not present in the idle list.
Reverse HTTP bind is very specific in that in rely on a server to
initiate connection. All connection settings are defined on the server
line and ignored from the bind line.
Before this patch, most of keywords were silently ignored. This could
result in a configuration from doing unexpected things from the user
point of view. To improve this situation, add a new 'rhttp_ok' field in
bind_kw structure. If not set, the keyword is forbidden on a reverse
bind line and will cause a fatal config error.
For the moment, only the following keywords are usable with reverse bind
'id', 'name' and 'nbconn'.
This change is safe as it's already forbidden to mix reverse and
standard addresses on the same bind line.
Previously, maxconn keyword was reused for a specific usage on reverse
HTTP binds to specify the number of active connect to proceed. To avoid
confusion, introduce a new dedicated keyword 'nbconn' which is specific
to reverse HTTP bind.
This new keyword is forbidden for non-reverse listener. A fatal error is
emitted during config parsing if this rule is not respected. It's safe
because it's also forbidden to mix standard and reverse addresses on the
same bind line.
Internally, nbconn value will be reassigned to 'maxconn' member of
bind_conf structure. This ensures that listener layer will automatically
reenable the preconnect task each time a connection is closed.
Reverse HTTP listeners are very specific and share only a very limited
subset of keywords with other listeners. As such, it is probable
meaningless to mix standard and reverse addresses on the same bind line.
This patch emits a fatal error during configuration parsing if this is
the case.
The number of updates sent at once was limited to not loop too long to emit
updates when the buffer size is huge or when the number of sync tables is
huge. The limit can be configured and is set to 200 by default. However,
this fix introduced a bug. It is impossible to syncrhonize two peers if the
number of tables is higher than this limit. Thus by default, it is not
possible to sync two peers if there are more than 200 tables to sync.
Technically speacking, a teaching process is finished if we loop on all tables
with no new update messages sent. Because we are limited at each call, the loop
is splitted on several calls. However the restart point for the next loop is
always the last table for which we emitted an update message. Thus with more
tables than the limit, the loop never reachs the end point.
Worse, in conjunction with the bug fixed by "BUG/MEDIUM: peers: Be sure to
always refresh recconnect timer in sync task", it is possible to trigger the
watchdog because the applets may be woken up in loop and leave requesting
more room while its buffer is empty.
To fix the issue, restart conditions for a teaching loop were changed. If
the teach process is interrupted, we now save the restart point, called
stop_local_table. It is the last evaluated table on the previous loop. This
restart point is reset when the teach process is finished.
In additionn, the updates_sent variable in peer_send_msgs() was renamed to
updates to avoid ambiguities. Indeed, the variable is incremented, whether
messages were sent or not.
This patch must be backported as far as 2.6.
Stefan Behte reported that since commit f279a2f14 ("BUG/MINOR: mux-h2:
refresh the idle_timer when the mux is empty"), the http-request and
http-keep-alive timeouts don't work anymore on H2. Before this patch,
and since 3e448b9b64 ("BUG/MEDIUM: mux-h2: make sure control frames do
not refresh the idle timeout"), they would only be refreshed after stream
frames were sent (HEADERS or DATA) but the patch above that adds more
refresh points broke these so they don't expire anymore as long as
there's some activity.
We cannot just revert the fix since it also addressed an isse by which
sometimes the timeout would trigger too early and provoque truncated
responses. The right approach here is in fact to only use refresh the
idle timer when the mux buffer was flushed from any such stream frames.
In order to achieve this, we're now setting a flag on the connection
whenever we write a stream frame, and we consider that flag when deciding
to refresh the buffer after it's emptied. This way we'll only clear that
flag once the buffer is empty and there were stream data in it, not if
there were no such stream data. In theory it remains possible to leave
the flag on if some control data is appended after the buffer and it's
never cleared, but in practice it's not a problem as a buffer will always
get sent in large blocks when the window opens. Even a large buffer should
be emptied once in a while as control frames will not fill it as much as
data frames could.
Given the patch above was backported as far as 2.6, this patch should
also be backported as far as 2.6.
tune.rcvbuf.client and tune.rcvbuf.server are not suitable for shared
dgram sockets because they're per connection so their units are not the
same. However, QUIC's listener and log servers are not connected and
take per-thread or per-process traffic where a socket log buffer might
be too small, causing undesirable packet losses and retransmits in the
case of QUIC. This essentially manifests in listener mode with new
connections taking a lot of time to set up under heavy traffic due to
the small queues causing delays. Let's add a few new settings allowing
to set these shared socket sizes on the frontend and backend side (which
reminds that these are per-front/back and not per client/server hence
not per connection).
Instead of speaking of an initialisation stage for each data
fast-forwarding, we now use the negociate term. Thus init_ff/init_fastfwd
functions were renamed nego_ff/nego_fastfwd.
The zero-copy forwarding or the mux-to-mux forwarding is a way to
fast-forward data without using the channels buffers. Data are transferred
from a mux to the other one. The kernel splicing is an optimization of the
zero-copy forwarding. But it can also use normal buffers (but not channels
ones). This way, it could be possible to fast-forward data with muxes not
supporting the kernel splicing (H2 and H3 muxes) but also with applets.
However, this mode can introduce regressions or bugs in future (just like
the kernel splicing). Thus, It could be usefull to disable this optim. To do
so, in configuration, the global tune settting
'tune.disable-zero-copy-forwarding' may be set in a global section or the
'-dZ' command line parameter may be used to start HAProxy. Of course, this
also disables the kernel splicing.
Because channel_is_empty() function does now only check the channel's
buffer, we can remove it and rely on co_data() instead. Of course, all tests
must be inverted.
channel_is_empty() is thus removed.
