When we want to avoid keeping pointers on a nameserver struct, it's not
always convenient to refer as a nameserver using it's text-based unique
identifier since it's not limited in length thus it cannot be serialized
and deserialized safely.
To address this limitation, we add a new ->puid member in dns_nameserver
struct which is a parent-unique numeric value that can be used to refer
to the dns nameserver within its parent resolver context.
To achieve this, we reused the resolver->nb_nameserver member that wasn't
used. Each time we add a new nameserver to a resolver: we set ns->puid to
the current number of nameservers within the resolver and we increment
this number right away.
Public helper function find_nameserver_by_resolvers_and_id() was added to
help retrieve nameserver pointer from (resolver X nameserver puid)
combination.
dns_dgram_init() function prototype was found in both resolvers and dns
header files, but it should belong to the dns header file, so the
duplicate entry was simply removed.
server_parse_addr_change_request() was completely replaced by the newer
srv_update_addr_port() function. Considering the function doesn't offer
useful features that srv_update_addr_port() couldn't do, we simply
remove the function.
Both functions are performing the similar tasks, except that the _port()
version is doing a bit more work.
In this patch, we add the server_set_inetaddr() function that works like
the srv_update_addr_port() but it takes parsed inputs instead of raw
strings as arguments.
Then, server_set_inetaddr() is used as underlying helper function for
both srv_update_addr() and srv_update_addr_port() to make them easier
to maintain.
Also, helper functions were added:
- server_set_inetaddr_warn() -> same as server_set_inetaddr() but report
a warning on updates.
- server_get_inetaddr() -> fills a struct server_inetaddr from srv
Since the feedback message generation part was slightly reworked, some
minor changes in the way addr:svc_port updates are reported in the logs
or cli messages should be expected (no loss of information though).
server addr:svc_port updates during runtime might set or clear the
SRV_F_MAPPORTS flag. Unfortunately, the flag update is still directly
performed by srv_update_addr_port() function while the addr:svc_port
update is being scheduled for atomic update. Given that existing readers
don't take server's lock to read addr:svc_port, they also check the
SRV_F_MAPPORTS flag right after without the lock.
So we could cause the readers to incorrectly interpret the svc_port from
the server struct because the mapport information is not published
atomically, resulting in inconsistencies between svc_port / mapport flag.
(MAPPORTS flag causes svc_port to be used differently by the reader)
To fix this, we publish the mapport information within the INETADDR server
event and we let the task responsible for updating server's addr and port
position or clear the flag depending on the mapport hint.
This patch depends on:
- MINOR: server/event_hdl: add server_inetaddr struct to facilitate event data usage
- MINOR: server/event_hdl: update _srv_event_hdl_prepare_inetaddr prototype
This should be backported in 2.9 with 683b2ae01 ("MINOR: server/event_hdl:
add SERVER_INETADDR event")
event_hdl_cb_data_server_inetaddr struct had some anonymous structs
defined in it, making it impossible to pass as a function argument and
harder to maintain since changes must be performed at multiple places
at once. So instead we define a storage struct named server_inetaddr
that helps to save addr:port server information in INET context.
4e5e2664 ("MINOR: proxy: add findserver_unique_id() and findserver_unique_name()")
added findserver_unique_id() and findserver_unique_name() functions that
were inspired from the historical findserver() function, so unfortunately
they don't perform well when used on large backend farms because they scan
the whole server list linearly.
I was about to provide a patch to optimize such functions when I stumbled
on Baptiste's work:
19a106d24 ("MINOR: server: server_find functions: id, name, best_match")
It turns out Baptiste already implemented helper functions to supersed
the unoptimized findserver() function (at least at runtime when servers
have been assigned their final IDs and inserted in the lookup trees): they
offer more matching options and rely on eb lookups so they are much more
suitable for fast queries. I don't know how I missed that, but they are a
perfect base for the server rid matching functions.
So in this patch, we essentially revert 4e5e2664 to provide the optimized
equivalent functions named server_find_by_id_unique() and
server_find_by_name_unique(), then we force existing findserver_unique_*()
callers to switch to the new functions.
This patch depends on:
- "OPTIM: server: eb lookup for server_find_by_name()"
This could be backported up to 2.8.
When a TCP frontend uses an HTTP backend, the stream is automatically
upgraded and it results in a similar behavior as if a switch-mode http
rule was evaluated since stream_set_http_mode() gets called in both
situations and minimal HTTP analyzers are set.
In the current implementation, some postparsing checks are generating
errors or warnings when the frontend is in TCP mode with some HTTP options
set and no upgrade is expected (no switch-rule http). But as you can guess,
unfortunately this leads in issues when such "HTTP" only options are used
in a frontend that has implicit switching rules (that is, when the
frontend uses an HTTP backend for example), because in this case the
PR_O_HTTP_UPG will not be set, so the postparsing checks will consider
that some options are not relevant and will raise some warnings.
Consider the following example:
backend back
mode http
server s1 git.haproxy.org:80
frontend front
mode tcp
bind localhost:8080
http-request set-var(txn.test) str(TRUE),debug(WORKING,stderr)
use_backend back
By starting an haproxy instance with the above example conf, we end up
having this warning:
[WARNING] (400280) : config : 'http-request' rules ignored for frontend 'front' as they require HTTP mode.
However, by making a request on the frontend, we notice that the request
rules are still executed, and that's because the stream is effectively
upgraded as a result of an implicit upgrade:
[debug] WORKING: type=str <TRUE>
So this confirms the previous description: since implicit and explicit
upgrades result in approximately the same behavior on the frontend side,
we should consider them both when doing postparsing checks.
This is what we try to address in the following commit: PR_O_HTTP_UPG
flag is now more generic in the sense that it refers to either implicit
(through default_backend or use_backend rules) or explicit (switch-mode
rules) upgrades. Indeed, everytime an HTTP or dynamic backend (where the
mode cannot be assumed during parsing) is encountered in default_backend
directive or use_backend rules, we explicitly position the upgrade flag
so that further checks that depend on the proxy being in HTTP context
don't report false warnings.
Some HTTP related stats functions need to know the parent proxy, mainly
to get a pointer on the related uri_auth set by the proxy or to check
scope settings.
The current design (probably historical as only the http context existed
by then) took the other approach: it propagates the uri pointer from the
http context deep down the calling stack up to the relevant functions.
For non-http contexts (cli), the pointer is set to NULL.
Doing so is not very pretty and not easy to maintain. Moreover, there were
still some places in the code were the uri pointer was learned directly
from the stream proxy because the argument was not available as argument
from those functions. This is error-prone, because if one day we decide to
change the source proxy in the parent function, we might still have some
functions down the stack that ignore the top most argument and still do
on their own, and we'll probably end up with inconsistencies.
So in this patch, we take a safer approach: the caller responsible for
creating the stats applet should set the http_px pointer so that any stats
function running under the applet that needs to know if it's running in
http context or needs to access parent proxy info may do so thanks to
the dedicated ctx->http_px pointer.
A regression was introduced by commit 2421c6fa7d ("BUG/MEDIUM: stconn: Block
zero-copy forwarding if EOS/ERROR on consumer side"). When zero-copy
forwarding is inuse and the consumer side is shut or in error, we declare it
as blocked and it is woken up. The idea is to handle this state at the
stream-connector level. However this definitly blocks receives on the
producer side. So if the mux is unable to close by itself, but instead wait
the peer to shut, this can lead to a wake up loop. And indeed, with the
passthrough multiplexer this may happen.
To fix the issue and prevent any loop, instead of blocking the zero-copy
forwarding, we now disable it. This way, the stream-connector on producer
side will fallback on classical receives and will be able to handle peer
shutdown properly. In addition, the wakeup of the consumer side was
removed. This will be handled, if necessary, by sc_notify().
This patch should fix the issue #2395. It must be backported to 2.9.
When the producer side (h1 for now) negociates with the consumer side to
perform a zero-copy forwarding, we now consider the consumer side as blocked
if it is closed and this was reported to the SE via a end-of-stream or a
(pending) error.
It is performed before calling ->nego_ff callback function, in se_nego_ff().
This way, all consumer are concerned automatically. The aim of this patch is
to fix an issue with the QUIC mux. Indeed, it is unexpected to send a frame
on an closed stream. This triggers a BUG_ON(). Other muxes are not affected
but it remains useless to try to send data if the stream is closed.
This patch should fix the issue #2372. It must be backported to 2.9.
qcc_app_ops is a set of callbacks used to unify application protocol
running over QUIC. This commit introduces some changes to clarify its
API :
* write simple comment to reflect each callback purpose
* rename decode_qcs to rcv_buf as this name is more common and is
similar to already existing snd_buf
* finalize is moved up as it is used during connection init stage
All these changes are ported to HTTP/3 layer. Also function comments
have been extended to highlight HTTP/3 special characteristics.
This function is similar to the previous one, but this time for QCS
sending buffer.
Previously, each application layer redefine their own version of
mux_get_buf() which was used to allocate <qcs.tx.buf>. Unify it under a
single function renamed qcc_get_stream_txbuf().
Replaces qcs_get_buf() function which naming does not reflect its
purpose. Add a new function qcc_get_stream_rxbuf() which allocate if
needed <qcs.rx.app_buf> and returns the buffer pointer. This function is
reserved for application protocol layer. This buffer is then accessed by
stconn layer.
For other qcs_get_buf() invocation which was used in effect for a local
buffer, replace these by a plain b_alloc().
"set severity-output" is one of these command that changes the appctx
state so the next commands are affected.
Unfortunately the master CLI works with pipelining and server close
mode, which means the connection between the master and the worker is
closed after each response, so for the next command this is a new appctx
state.
To fix the problem, 2 new flags are added ACCESS_MCLI_SEVERITY_STR and
ACCESS_MCLI_SEVERITY_NB which are used to prefix each command sent to
the worker with the right "set severity-output" command.
This patch fixes issue #2350.
It could be backported as far as 2.6.
Before this patch, it was not possible to use a list of patterns, map or a
list of acls, without an existing file. However, it could be handy to just
use an ID, with no file on the disk. It is pretty useful for everyone
managing dynamically these lists. It could also be handy to try to load a
list from a file if it exists without failing if not. This way, it could be
possible to make a cold start without any file (instead of empty file),
dynamically add and del patterns, dump the list to the file periodically to
reuse it on reload (via an external process).
In this patch, we uses some prefixes to be able to use virtual or optional
files.
The default case remains unchanged. regular files are used. A filename, with
no prefix, is used as reference, and it must exist on the disk. With the
prefix "file@", the same is performed. Internally this prefix is
skipped. Thus the same file, with ou without "file@" prefix, references the
same list of patterns.
To use a virtual map, "virt@" prefix must be used. No file is read, even if
the following name looks like a file. It is just an ID. The prefix is part
of ID and must always be used.
To use a optional file, ie a file that may or may not exist on a disk at
startup, "opt@" prefix must be used. If the file exists, its content is
loaded. But HAProxy doesn't complain if not. The prefix is not part of
ID. For a given file, optional files and regular files reference the same
list of patterns.
This patch should fix the issue #2202.
tune.cache.zero-copy-forwarding parameter can now be used to enable or
disable the zero-copy fast-forwarding for the cache applet only. It is
enabled ('on') by default. It can be disabled by setting the parameter to
'off'.
For now, CF_STREAMER and CF_STREAMER_FAST flags are set in sc_conn_recv()
function. The logic is moved in dedicated functions.
First, channel_check_idletimer() function is now responsible to check the
channel's last read date against the idle timer value to be sure the
producer is still streaming data. Otherwise, it removes STREAMER flags.
Then, channel_check_xfer() function is responsible to check amount of data
transferred avec a receive, to eventually update STREAMER flags.
In sc_conn_recv(), we now use these functions.
Zero-copy fast-forwading feature is a quite new and is a bit sensitive.
There is an option to disable it globally. However, all protocols have not
the same maturity. For instance, for the PT multiplexer, there is nothing
really new. The zero-copy fast-forwading is only another name for the kernel
splicing. However, for the QUIC/H3, it is pretty new, not really optimized
and it will evolved. And soon, the support will be added for the cache
applet.
In this context, it is usefull to be able to enable/disable zero-copy
fast-forwading per-protocol and applet. And when it is applicable, on sends
or receives separately. So, instead of having one flag to disable it
globally, there is now a dedicated bitfield, global.tune.no_zero_copy_fwd.
It is possible that a server's addr family is temporarily set to AF_UNSPEC
even if we're certain to be in INET context (ipv4, ipv6).
Indeed, as soon as IP address resolving is involved, srv->addr family will
be set to AF_UNSPEC when the resolution fails (could happen at anytime).
However, _srv_event_hdl_prepare_inetaddr() wrongly assumed that it would
only be called with AF_INET or AF_INET6 families. Because of that, the
function will handle AF_UNSPEC address as an IPV6 address: not only
we could risk reading from an unititialized area, but we would then
propagate false information when publishing the event.
In this patch we make sure to properly handle the AF_UNSPEC family in
both the "prev" and the "next" part for SERVER_INETADDR event and that
every members are explicitly initialized.
This bug was introduced by 6fde37e046 ("MINOR: server/event_hdl: add
SERVER_INETADDR event"), no backport needed.
preferred_address is a transport parameter specify by the server. It
specified both an IPv4 and IPv6 address. These addresses were defined as
plain array in <struct tp_preferred_address>.
Convert these adressees to use the common types in_addr/in6_addr. With
this change, dumping of preferred_address is extended. It now displays
the addresses using inet_ntop() and CID value.
retrieve_qc_conn_from_cid() requires listener as argument whereas it is
unused. This is an artifact from the old architecture where CID trees
where stored on listener instances instead of globally. Remove it to
better reflect this change.
Just like the ->ctl() callback function, used to send commands to mux
connections, the ->sctl() callback function can now be used to send commands
to mux streams. The first command, MUX_SCTL_SID, is a way to request the mux
stream ID.
It will be implemented later for each mux.
Instead of the generic MUX_, we now use MUX_CTL_ prefix for all mux_ctl_type
value. This will avoid any ambiguities with other enums, especially with a
new one that will be added to get information on mux streams.
It is now possible to retrieve the session terminate state, using
"txn.sess_term_state". The sample fetch returns the 2-character session
termation state.
Of course, the result of this sample fetch is volatile. It is subject to
change. It is also most of time useless because no termation state is set
except at the end. It should only be useful in http-after-response rule
sets. It may also be used to customize the logs using a log-format
directive.
This patch should fix the issue #2221.
The code returned by the "status" sample fetch is the one in the HTTP
response at the moment the sample is evaluated. It may be the status code in
the server response or the one of the HAProxy reply in case of error, deny,
redirect...
However, it could be handy to retrieve the status code returned by the
server, when a HTTP response was really received from it. It is the purpose
of the "server_status" sample fetch. The server status code itself is stored
in the HTTP txn.
In previous log backend implementation, we created a pseudo log target
for each declared log server, and we made the log target's address point
to the actual server address to save some time and prevent unecessary
copies.
But this was done without knowing that when FQDN is involved (more broadly
when dns/resolution is involved), the "port" part of server addr should
not be relied upon, and we should explicitly use ->svc_port for that
purpose.
With that in mind and thanks to the previous commit, some changes were
required: we allocate a dedicated addr within the log target when target
is in DGRAM mode. The addr is first initialized with known values and it
is then updated automatically by _srv_set_inetaddr() during runtime.
(the change is atomic so readers don't need to worry about it)
addr from server "log target" (INET/DGRAM mode) is made of the combination
of server's address (lacking the port part) and server's svc_port.
The local variable "event_hdl_async_max_notif_at_once" which was
introduced with the event_hdl API was left as is but with a TODO note
telling that we should make it a global tunable.
Well, we're doing this now. To prepare for upcoming tunables related to
event_hdl API, we add a dedicated struct named event_hdl_tune which is
globally exposed through the event_hdl header file so that it may be used
from everywhere. The struct is automatically initialized in
event_hdl_init() according to defaults.h.
"event_hdl_async_max_notif_at_once" now becomes
"event_hdl_tune.max_events_at_once" with it's dedicated
configuation keyword: "tune.events.max-events-at-once".
We're also taking this opportunity to raise the default value from 10
to 100 since it's seems quite reasonnable given existing async event_hdl
users.
The documentation was updated accordingly.
Implements the customized payload pattern for the master CLI.
The pattern is stored in the stream in char pcli_payload_pat[8].
The principle is basically the same as the CLI one, it looks for '<<'
then stores what's between '<<' and '\n', and look for it to exit the
payload mode.
The CLI payload syntax has some limitation, it can't handle payloads
with empty lines, which is a common problem when uploading a PEM file
over the CLI.
This patch implements a way to customize the ending pattern of the CLI,
so we can't look for other things than empty lines.
A char cli_payload_pat[8] is used in the appctx to store the customized
pattern. The pattern can't be more than 7 characters and can still empty
to match an empty line.
The cli_io_handler() identifies the pattern and stores it, and
cli_parse_request() identifies the end of the payload.
If the customized pattern between "<<" and "\n" is more than 7
characters, it is not considered as a pattern.
This patch only implements the parser for the 'stats socket', another
patch is needed for the 'master CLI'.
Move qc_notify_send() from quic_tx.c to quic_conn.c. Note that it was already
exported from both quic_conn.h and quic_tx.h. Modify this latter header
to fix the duplication.
Such a warning appeared after having added quic_retry.h which includes only
headers for types (quic_cid-t.h, clock-t.h...)
In file included from include/haproxy/quic_retry.h:12,
from src/quic_retry.c:5:
include/haproxy/quic_cid-t.h:26:26: error: field ‘seq_num’ has incomplete type
26 | struct eb64_node seq_num;
Add quic_retry.c new C file for the QUIC retry feature:
quic_saddr_cpy() moved from quic_tx.c,
quic_generate_retry_token_aad() moved from
quic_generate_retry_token() moved from
parse_retry_token() moved from
quic_retry_token_check() moved from
quic_retry_token_check() moved from
This function is in relation with the Initial packet number space which is
more linked to the QUIC TLS specifications. Let's move it to quic_tls.h
to be inlined.
Move quic_path struct from quic_conn-t.h to quic_cc-t.h and rename it to quic_cc_path.
Update the code consequently.
Also some inlined functions in relation with QUIC path to quic_cc.h
Move quic_pkt_type(), quic_saddr_cpy(), quic_write_uint32(), max_available_room(),
max_stream_data_size(), quic_packet_number_length(), quic_packet_number_encode()
and quic_compute_ack_delay_us() to quic_tx.c because only used in this file.
Also move quic_ack_delay_ms() and quic_read_uint32() to quic_tx.c because they
are used only in this file.
Move quic_rx_packet_refinc() and quic_rx_packet_refdec() to quic_rx.h header.
Move qc_el_rx_pkts(), qc_el_rx_pkts_del() and qc_list_qel_rx_pkts() to quic_tls.h
header.
Move quic_cstream struct definition from quic_conn-t.h to quic_tls-t.h.
Its pool is also moved from quic_conn module to quic_tls. Same thing for
quic_cstream_new() and quic_cstream_free().
