When checking if a socket we got from the parent is suitable for a listener,
we just checked that the path matched sockname.tmp, however this is
unsuitable for abns sockets, where we don't have to create a temporary
file and rename it later.
To detect that, check that the first character of the sun_path is 0 for
both, and if so, that &sun_path[1] is the same too.
This should be backported to 1.8.
When a listener is temporarily disabled, we start by locking it and then we call
.pause callback of the underlying protocol (tcp/unix). For TCP listeners, this
is not a problem. But listeners bound on an unix socket are in fact closed
instead. So .pause callback relies on unbind_listener function to do its job.
Unfortunatly, unbind_listener hold the listener's lock and then call an internal
function to unbind it. So, there is a deadlock here. This happens during a
reload. To fix the problemn, the function do_unbind_listener, which is lockless,
is now exported and is called when a listener bound on an unix socket is
temporarily disabled.
This patch must be backported in 1.8.
When removing the socket from the xfer_sock_list, we want to set
next->prev to prev, not to next->prev, which is useless.
This should be backported to 1.8.
fd_insert() is currently called just after setting the owner and iocb,
but proceeding like this prevents the operation from being atomic and
requires a lock to protect the maxfd computation in another thread from
meeting an incompletely initialized FD and computing a wrong maxfd.
Fortunately for now all fdtab[].owner are set before calling fd_insert(),
and the first lock in fd_insert() enforces a memory barrier so the code
is safe.
This patch moves the initialization of the owner and iocb to fd_insert()
so that the function will be able to properly arrange its operations and
remain safe even when modified to become lockless. There's no other change
beyond the internal API.
The listeners and connectors may complain that process-wide or
system-wide FD limits have been reached and will in this case report
maxfd as the limit. This is wrong in fact since there's no reason for
the whole FD space to be contiguous when the total # of FD is reached.
A better approach would consist in reporting the accurate number of
opened FDs, but this is pointless as what matters here is to give a
hint about what might be wrong. So let's simply report the configured
maxsock, which will generally explain why the process' limits were
reached, which is the most common reason. This removes another
dependency on maxfd.
These flags are not exactly for the data layer, they instead indicate
what is expected from the transport layer. Since we're going to split
the connection between the transport and the data layers to insert a
mux layer, it's important to have a clear idea of what each layer does.
All function conn_data_* used to manipulate these flags were renamed to
conn_xprt_*.
A config containing "stats socket /path/to/socket mode admin" used to
silently start and be unusable (mode 0, level user) because the "mode"
parser doesn't take care of non-digits. Now it properly reports :
[ALERT] 276/144303 (7019) : parsing [ext-check.cfg:4] : 'stats socket' : ''mode' : missing or invalid mode 'admin' (octal integer expected)'
This can probably be backported to 1.7, 1.6 and 1.5, though reporting
parsing errors in very old versions probably isn't a good idea if the
feature was left unused for years.
Since everything is self contained in proto_uxst.c there's no need to
export anything. The same should be done for proto_tcp.c but the file
contains other stuff that's not related to the TCP protocol itself
and which should first be moved somewhere else.
cfgparse has no business directly calling each individual protocol's 'add'
function to create a listener. Now that they're all registered, better
perform a protocol lookup on the family and have a standard ->add method
for all of them.
It's a shame that cfgparse() has to make special cases of each protocol
just to cast the port to the target address family. Let's pass the port
in argument to the function. The unix listener simply ignores it.
Till now connections used to rely exclusively on file descriptors. It
was planned in the past that alternative solutions would be implemented,
leading to member "union t" presenting sock.fd only for now.
With QUIC, the connection will need to continue to exist but will not
rely on a file descriptor but a connection ID.
So this patch introduces a "connection handle" which is either a file
descriptor or a connection ID, to replace the existing "union t". We've
now removed the intermediate "struct sock" which was never used. There
is no functional change at all, though the struct connection was inflated
by 32 bits on 64-bit platforms due to alignment.
James Brown reported some cases where a race condition happens between
the old and the new processes resulting in the leaving process removing
a newly bound unix socket. Jeff gave all the details he observed here :
https://www.mail-archive.com/haproxy@formilux.org/msg25001.html
The unix socket removal was an attempt at an optimal cleanup, which
almost never works anyway since the process is supposed to be chrooted.
And in the rare cases where it works it occasionally creates trouble.
There was already a workaround in place to avoid removing this socket
when it's been inherited from a parent's file descriptor.
So let's finally kill this useless stuff now to definitely get rid of
this persistent problem.
This fix should be backported to all stable releases.
Add a new command that will send all the listening sockets, via the
stats socket, and their properties.
This is a first step to workaround the linux problem when reloading
haproxy.
There's a test after a successful synchronous connect() consisting
in waking the data layer up asap if there's no more handshake.
Unfortunately this test is run before setting the CO_FL_SEND_PROXY
flag and before the transport layer adds its own flags, so it can
indicate a willingness to send data while it's not the case and it
will have to be handled later.
This has no visible effect except a useless call to a function in
case of health checks making use of the proxy protocol for example.
Additionally a corner case where EALREADY was returned and considered
equivalent to EISCONN was fixed so that it's considered equivalent to
EINPROGRESS given that the connection is not complete yet. But this
code should never return on the first call anyway so it's mostly a
cleanup.
This fix should be backported to 1.7 and 1.6 at least to avoid
headaches during some debugging.
When a connect() to a unix socket returns EAGAIN we talk about
"no free ports" in the error/debug message, which only makes
sense when using TCP.
Explain connect() failure and suggest troubleshooting server
backlog size.
Abstract namespace sockets ignore the shutdown() call and do not make
it possible to temporarily stop listening. The issue it causes is that
during a soft reload, the new process cannot bind, complaining that the
address is already in use.
This change registers a new pause() function for unix sockets and
completely unbinds the abstract ones since it's possible to rebind
them later. It requires the two previous patches as well as preceeding
fixes.
This fix should be backported into 1.5 since the issue apperas there.
Jan Seda noticed that abstract sockets are incompatible with soft reload,
because the new process cannot bind and immediately fails. This patch marks
the binding as retryable and not fatal so that the new process can try to
bind again after sending a signal to the old process.
Note that this fix is not enough to completely solve the problem, but it
is necessary. This patch should be backported to 1.5.
When bind() fails (function uxst_bind_listener()), the fail path doesn't
consider the abstract namespace and tries to unlink paths held in
uninitiliazed memory (tempname and backname). See the strace excerpt;
the strings still hold the path from test1.
===============================================================================================
23722 bind(5, {sa_family=AF_FILE, path=@"test2"}, 110) = -1 EADDRINUSE (Address already in use)
23722 unlink("/tmp/test1.sock.23722.tmp") = -1 ENOENT (No such file or directory)
23722 close(5) = 0
23722 unlink("/tmp/test1.sock.23722.bak") = -1 ENOENT (No such file or directory)
===============================================================================================
This patch should be backported to 1.5.
Plain "tcp" health checks sent to a unix socket cause two connect()
calls to be made, one to connect, and a second one to verify that the
connection properly established. But with unix sockets, we get
immediate notification of success, so we can avoid this second
attempt. However we need to ensure that we'll visit the connection
handler even if there's no remaining handshake pending, so for this
we claim we have some data to send in order to enable polling for
writes if there's no more handshake.
These sockets are the same as Unix sockets except that there's no need
for any filesystem access. The address may be whatever string both sides
agree upon. This can be really convenient for inter-process communications
as well as for chaining backends to frontends.
These addresses are forced by prepending their address with "abns@" for
"abstract namespace".
We've had everything in place for this for a while now, we just missed
the connect function for UNIX sockets. Note that in order to connect to
a UNIX socket inside a chroot, the path will have to be relative to the
chroot.
UNIX sockets connect about twice as fast as TCP sockets (or consume
about half of the CPU at the same rate). This is interesting for
internal communications between SSL processes and HTTP processes
for example, or simply to avoid allocating source ports on the
loopback.
The tcp_connect_probe() function is still used to probe a dataless
connection, but it is compatible so that's not an issue for now.
Health checks are not yet fully supported since they require a port.
Using the address syntax "fd@<num>", a listener may inherit a file
descriptor that the caller process has already bound and passed as
this number. The fd's socket family is detected using getsockname(),
and the usual initialization is performed through the existing code
for that family, but the socket creation is skipped.
Whether the parent has performed the listen() call or not is not
important as this is detected.
For UNIX sockets, we immediately clear the path after preparing a
socket so that we never remove it in case an abort would happen due
to a late error during startup.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
The "mode", "uid", "gid", "user" and "group" bind options were moved to
proto_uxst as they are unix-specific.
Note that previous versions had a bug here, only the last listener was
updated with the specified settings. However, it almost never happens
that bind lines contain multiple UNIX socket paths so this is not that
much of a problem anyway.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
fdtab[].state was only used to know whether a connection was in progress
or an error was encountered. Instead we now use connection->flags to store
a flag for both. This way, connection management will be able to update the
connection status on I/O.
The destination address is purely a connection thing and not an fd thing.
It's also likely that later the address will be stored into the connection
and linked to by the SI.
struct fdinfo only keeps the pointer to the port range and the local port
for now. All of this also needs to move to the connection but before this
the release of the port range must move from fd_delete() to a new function
dedicated to the connection.
These pointers were used to hold pointers to buffers in the past, but
since we introduced the stream interface, they're no longer used but
they were still sometimes set.
Removing them shrink the struct fdtab from 32 to 24 bytes on 32-bit machines,
and from 52 to 36 bytes on 64-bit machines, which is a significant saving. A
quick tests shows a steady 0.5% performance gain, probably due to the better
cache efficiency.
Commit e164e7a removed get_src/get_dst setting in the stream interfaces but
forgot to set it in proto_tcp. Get the feature back because we need it for
logging, transparent mode, ACLs etc... We now rely on the stream interface
direction to know what syscall to use.
One benefit of doing it this way is that we don't use getsockopt() anymore
on outgoing stream interfaces nor on UNIX sockets.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
The previous sockstream_accept() function uses nothing from sockstream, and
is totally irrelevant to stream interfaces. Move this to the protocols.c
file which handles listeners and protocols, and call it listener_accept().
It now makes much more sense that the code dealing with listen() also handles
accept() and passes it to upper layers.
Managing listeners state is difficult because they have their own state
and can at the same time have theirs dictated by their proxy. The pause
is not done properly, as the proxy code is fiddling with sockets. By
introducing new functions such as pause_listener()/resume_listener(), we
make it a bit more obvious how/when they're supposed to be used. The
listen_proxies() function was also renamed to resume_proxies() since
it's only used for pause/resume.
This patch is the first in a series aiming at getting rid of the maintain_proxies
mess. In the end, proxies should not call enable_listener()/disable_listener()
anymore.
Since unix sockets are supported for bind, the default backlog size was not
enough to accept the traffic. The size is now inherited from the listener
to behave like the tcp listeners.
This also affects the "stats socket" backlog, which is now determined by
"stats maxconn".
There were a lot of snprintf() everywhere in the UNIX bind code. Now we
proceed as for tcp and indicate the socket path at the end between square
brackets. The code is smaller and more readable.
MAXPATHLEN may be used at other places, it's unconvenient to have it
redefined in a few files. Also, since checking it requires including
sys/param.h, some versions of it cause a macro declaration conflict
with MIN/MAX which are defined in tools.h. The solution consists in
including sys/param.h in both files so that we ensure it's loaded
before the macros are defined and MAXPATHLEN is checked.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
Right now we count the incoming connection only once everything has
been allocated. Since we're planning on considering early ACL rules,
we need to count the connection earlier.
The response analyser was not emptied upon creation of a new session. In
fact it was always zero just because last session leaved it in a zero state,
but in case of shared pools this cannot be guaranteed. The net effect is
that it was possible to have some HTTP (or any other) analysers on the
response path of a stats unix socket, which would reject the response.
This fix must be backported to 1.4.
Since the last documentation cleanups, I've found more typos that I kept
in a corner instead of sending you a mail just for one character :)
--
Cyril Bont
Some rarely information are stored in fdtab, making it larger for no
reason (source port ranges, remote address, ...). Such information
lie there because the checks can't find them anywhere else. The goal
will be to move these information to the stream interface once the
checks make use of it.
For now, we move them to an fdinfo array. This simple change might
have improved the cache hit ratio a little bit because a 0.5% of
performance increase has measured.
The stats handler used to store internal states in s->ana_state. Now
we only rely on si->st0 in which we can store as many states as we
have possible outputs. This cleans up the stats code a lot and makes
it more maintainable. It has also reduced code size by a few hundred
bytes.
By default, when data is sent over a socket, both the write timeout and the
read timeout for that socket are refreshed, because we consider that there is
activity on that socket, and we have no other means of guessing if we should
receive data or not.
While this default behaviour is desirable for almost all applications, there
exists a situation where it is desirable to disable it, and only refresh the
read timeout if there are incoming data. This happens on sessions with large
timeouts and low amounts of exchanged data such as telnet session. If the
server suddenly disappears, the output data accumulates in the system's
socket buffers, both timeouts are correctly refreshed, and there is no way
to know the server does not receive them, so we don't timeout. However, when
the underlying protocol always echoes sent data, it would be enough by itself
to detect the issue using the read timeout. Note that this problem does not
happen with more verbose protocols because data won't accumulate long in the
socket buffers.
When this option is set on the frontend, it will disable read timeout updates
on data sent to the client. There probably is little use of this case. When
the option is set on the backend, it will disable read timeout updates on
data sent to the server. Doing so will typically break large HTTP posts from
slow lines, so use it with caution.
We can get rid of the stats analyser by moving all the stats code
to a stream interface applet. Above being cleaner, it provides new
advantages such as the ability to process requests and responses
from the same function and work only with simple state machines.
There's no need for any hijack hack anymore.
The direct advantage for the user are the interactive mode and the
ability to chain several commands delimited by a semi-colon. Now if
the user types "prompt", he gets a prompt from which he can send
as many requests as he wants. All outputs are terminated by a
blank line followed by a new prompt, so this can be used from
external tools too.
The code is not very clean, it needs some rework, but some part
of the dirty parts are due to the remnants of the hijack mode used
in the old functions we call.
The old AN_REQ_STATS_SOCK analyser flag is now unused and has been
removed.
When stream interfaces will embedded applets running as part as their
holding task, we'll need a new callback to process them from the
session processor.
We used to call stream_sock_data_finish() directly at the end of
a session update, but if we want to support non-socket interfaces,
we need to have this function configurable. Now we access it via
->update().
The new tune.bufsize and tune.maxrewrite global directives allow one to
change the buffer size and the maxrewrite size. Right now, setting bufsize
too low will block stats sockets which will not be able to write at all.
An error checking must be added to buffer_write_chunk() so that if it
cannot write its message to an empty buffer, it causes the caller to abort.
The first step towards dynamic buffer size consists in removing
all static definitions of the buffer size. Instead, we store a
buffer's size in itself. Right now they're all preinitialized
to BUFSIZE, but we will change that.
Since the listener is the one indicating what analyser and session
handlers to call, it makes sense that it also sets the task's nice
value. This also helps getting rid of the last trace of the stats
in the proto_uxst file.
The remains of the stats socket code has nothing to do in proto_uxst
anymore and must move to dumpstats. The code is much cleaner and more
structured. It was also an opportunity to rename AN_REQ_UNIX_STATS
as AN_REQ_STATS_SOCK as the stats socket is no longer unix-specific
either.
The last item refering to stats in proto_uxst is the setting of the
task's nice value which should in fact come from the listener.
process_session() is now ready to handle unix stats sockets. This
first step works and old code has not been removed. A cleanup is
required. The stats handler is not unix socket-centric anymore and
should move to dumpstats.c.
Creating a frontend for the global stats socket will help merge
unix sockets management with the other socket management. Since
frontends are huge structs, we only allocate it if required.
The connection establishment was completely handled by backend.c which
normally just handles LB algos. Since it's purely TCP, it must move to
proto_tcp.c. Also, instead of calling it directly, we now call it via
the stream interface, which will later help us unify session handling.
When issuing commands on the unix socket, there's no way to
know if the result is empty or if the command is wrong. This
patch makes invalid command return a help message.
Some stream analysers might become generic enough to be called
for several bits. So we cannot have the analyser bit hard coded
into the analyser itself. Let's make the caller inform the callee.
unix sockets are not attached to a real frontend, so there is
no way to disable/enable the listener depending on the global
session count. For this reason, if the global maxconn is reached
and a unix socket comes in, it will just be ignored and remain
in the poll list, which will call again indefinitely.
So we need to accept then drop incoming unix connections when
the table is full.
This should not happen with clean configurations since the global
maxconn should provide enough room for unix sockets.
If the accept() is done before checking for global.maxconn, we can
accept too many connections and encounter a lack of file descriptors
when trying to connect to the server. This is the cause of the
"cannot get a server socket" message encountered in debug mode
during injections with low timeouts.
While processing the session, we used to resync the FSMs when buffer
flags changed. But since BF_KERN_SPLICING and BF_READ_DONTWAIT were
introduced, sometimes we could resync after they were set, which is
not what we want. This was because there were some old checks left
which did not mask changes with BF_MASK_STATIC before checking.
When the reader does not expect to read lots of data, it can
set BF_READ_DONTWAIT on the request buffer. When it is set,
the stream_sock_read callback will not try to perform multiple
reads, it will return after only one, and clear the flag.
That way, we can immediately return when waiting for an HTTP
request without trying to read again.
On pure request/responses schemes such as monitor-uri or
redirects, this has completely eliminated the EAGAIN occurrences
and the epoll_ctl() calls, resulting in a performance increase of
about 10%. Similar effects should be observed once we support
HTTP keep-alive since we'll immediately disable reads once we
get a full request.
It's sometimes useful at least for statistics to keep a task count.
It's easy to do by forcing the rare task creators to always use the
same functions to create/destroy a task.
The forwarding condition was not very clear. We would only enable
forwarding when send_max is zero, and we would only splice when no
analyser is installed. In fact we want to enable forward when there
is no analyser and we want to splice at soon as there is data to
forward, regardless of the analysers.
In process_session(), we used to re-run through all the evaluation
loop when only the response had changed. Now we carefully check in
this order :
- changes to the stream interfaces (only SI_ST_DIS)
- changes to the request buffer flags
- changes to the response buffer flags
And we branch to the appropriate section. This saves significant
CPU cycles, which is important since process_session() is one of
the major CPU eaters.
The same changes have been applied to uxst_process_session().
All the tasks callbacks had to requeue the task themselves, and update
a global timeout. This was not convenient at all. Now the API has been
simplified. The tasks callbacks only have to update their expire timer,
and return either a pointer to the task or NULL if the task has been
deleted. The scheduler will take care of requeuing the task at the
proper place in the wait queue.
The new "show errors" command sent on a unix socket will dump
all captured request and response errors for all proxies. It is
also possible to bound the log to frontends and backends whose
ID is passed as an optional parameter.
The output provides information about frontend, backend, server,
session ID, source address, error type, and error position along
with a complete dump of the request or response which has caused
the error.
If a new error scratches the one currently being reported, then
the dump is aborted with a warning message, and processing goes
on to next error.
Unix socket processing was still quite buggy. It did not properly
handle interrupted output due to a full response buffer. The fix
mainly consists in not trying to prematurely enable write on the
response buffer, just like the standard session works. This also
gets the unix socket code closer to the standard session code
handling.
Commit 8a5c626e73 introduced the sessions
dump on the unix socket. This implementation is buggy because it may try
to link to the sessions list's head after the last session is removed
with a backref. Also, for the LIST_ISEMPTY test to succeed, we have to
proceed with LIST_INIT after LIST_DEL.
The way the buffers and stream interfaces handled ->to_forward was
really not handy for multiple reasons. Now we've moved its control
to the receive-side of the buffer, which is also responsible for
keeping send_max up to date. This makes more sense as it now becomes
possible to send some pre-formatted data followed by forwarded data.
The following explanation has also been added to buffer.h to clarify
the situation. Right now, tests show that the I/O is behaving extremely
well. Some work will have to be done to adapt existing splice code
though.
/* Note about the buffer structure
The buffer contains two length indicators, one to_forward counter and one
send_max limit. First, it must be understood that the buffer is in fact
split in two parts :
- the visible data (->data, for ->l bytes)
- the invisible data, typically in kernel buffers forwarded directly from
the source stream sock to the destination stream sock (->splice_len
bytes). Those are used only during forward.
In order not to mix data streams, the producer may only feed the invisible
data with data to forward, and only when the visible buffer is empty. The
consumer may not always be able to feed the invisible buffer due to platform
limitations (lack of kernel support).
Conversely, the consumer must always take data from the invisible data first
before ever considering visible data. There is no limit to the size of data
to consume from the invisible buffer, as platform-specific implementations
will rarely leave enough control on this. So any byte fed into the invisible
buffer is expected to reach the destination file descriptor, by any means.
However, it's the consumer's responsibility to ensure that the invisible
data has been entirely consumed before consuming visible data. This must be
reflected by ->splice_len. This is very important as this and only this can
ensure strict ordering of data between buffers.
The producer is responsible for decreasing ->to_forward and increasing
->send_max. The ->to_forward parameter indicates how many bytes may be fed
into either data buffer without waking the parent up. The ->send_max
parameter says how many bytes may be read from the visible buffer. Thus it
may never exceed ->l. This parameter is updated by any buffer_write() as
well as any data forwarded through the visible buffer.
The consumer is responsible for decreasing ->send_max when it sends data
from the visible buffer, and ->splice_len when it sends data from the
invisible buffer.
A real-world example consists in part in an HTTP response waiting in a
buffer to be forwarded. We know the header length (300) and the amount of
data to forward (content-length=9000). The buffer already contains 1000
bytes of data after the 300 bytes of headers. Thus the caller will set
->send_max to 300 indicating that it explicitly wants to send those data,
and set ->to_forward to 9000 (content-length). This value must be normalised
immediately after updating ->to_forward : since there are already 1300 bytes
in the buffer, 300 of which are already counted in ->send_max, and that size
is smaller than ->to_forward, we must update ->send_max to 1300 to flush the
whole buffer, and reduce ->to_forward to 8000. After that, the producer may
try to feed the additional data through the invisible buffer using a
platform-specific method such as splice().
*/
If an analyser sets buf->to_forward to a given value, that many
data will be forwarded between the two stream interfaces attached
to a buffer without waking the task up. The same applies once all
analysers have been released. This saves a large amount of calls
to process_session() and a number of task_dequeue/queue.
By letting the producer tell the consumer there is data to check,
and the consumer tell the producer there is some space left again,
we can cut in half the number of session wakeups.
This is also an important starting point for future splicing support.
Sometimes we don't care about a read timeout, for instance, from the
client when waiting for the server, but we still want the client to
be able to read.
Till now it was done by articially forcing the read timeout to ETERNITY.
But this will cause trouble when we want the low level stream sock to
communicate without waking the session up. So we add a BF_READ_NOEXP
flag to indicate that when the read timeout is to be set, it might
have to be set to ETERNITY.
Since BF_READ_ENA was not used, we replaced this flag.
For keep-alive, line-mode protocols and splicing, we will need to
limit the sender to process a certain amount of bytes. The limit
is automatically set to the buffer size when analysers are detached
from the buffer.
It is now possible to list all known sessions by issuing "show sess"
on the unix stats socket. The format is not much evolved but it is
very useful for debugging.
The doc has been updated to reflect the new keyword.
This is the first step in implementing a session dump tool.
A session dump will need restart points. It will be necessary for
it to get references to sessions which can be moved when the session
dies.
The principle is not that complex : when a session ends, it looks for
any potential back-references. If it finds any, then it moves them to
the next session in the list. The dump function will of course have
to restart from that new point.
Instead of calling a hard-coded function to produce data, let's
reference this function into the buffer and call it from there
when BF_HIJACK is set. This goes in the direction of more generic
session management code.
The listener referenced in the fd was only used to check the
listener state upon session termination. There was no guarantee
that the FD had not been reassigned by the moment it was processed,
so this was a bit racy. Having it in the session is more robust.
The unix protocol handler had not been updated during the last
stream_sock changes. This has been done now. There is still a
lot of duplicated code between session.c and proto_uxst.c due
to the way the session is handled. Session.c relies on the existence
of a frontend while it does not exist here.
It is easier to see the difference between the stats part (placed
in dumpstats.c) and the unix-stream part (in proto_uxst.c).
The hijacking function still needs to be dynamically set into the
response buffer, and some cleanup is still required, then all those
changes should be forward-ported to the HTTP part. Adding support
for new keywords should not cause trouble now.
The accept function must be adapted to the new framework. It is
still broken, and calling it will still result in a segfault. But
this cleanup is needed anyway.
Now the global variable 'sessions' will be a dual-linked list of all
known sessions. The list element is set at the beginning of the session
so that it's easier to follow them all with gdb.
The owner of an fd was initially a task but this was sometimes
casted to a (struct listener *). We'll soon need more types,
so void* is more appropriate.
It's very frequent to require some information about the
reason why a task is running. Some flags have been added
so that a task now knows if it got woken up due to I/O
completion, timeout, etc...
The buffer flags became a big bazaar. Re-arrange them
so that their names are more explicit and so that they
are more easily readable in hex form. Some aggregates
have also been adjusted.
srv_state has been removed from HTTP state machines, and states
have been split in either TCP states or analyzers. For instance,
the TARPIT state has just become a simple analyzer.
New flags have been added to the struct buffer to compensate this.
The high-level stream processors sometimes need to force a disconnection
without touching a file-descriptor (eg: report an error). But if
they touched BF_SHUTW or BF_SHUTR, the file descriptor would not
be closed. Thus, the two SHUT?_NOW flags have been added so that
an application can request a forced close which the stream interface
will be forced to obey.
During this change, a new BF_HIJACK flag was added. It will
be used for data generation, eg during a stats dump. It
prevents the producer on a buffer from sending data into it.
BF_SHUTR_NOW /* the producer must shut down for reads ASAP */
BF_SHUTW_NOW /* the consumer must shut down for writes ASAP */
BF_HIJACK /* the producer is temporarily replaced */
BF_SHUTW_NOW has precedence over BF_HIJACK. BF_HIJACK has
precedence over BF_MAY_FORWARD (so that it does not need it).
New functions buffer_shutr_now(), buffer_shutw_now(), buffer_abort()
are provided to manipulate BF_SHUT* flags.
A new type "stream_interface" has been added to describe both
sides of a buffer. A stream interface has states and error
reporting. The session now has two stream interfaces (one per
side). Each buffer has stream_interface pointers to both
consumer and producer sides.
The server-side file descriptor has moved to its stream interface,
so that even the buffer has access to it.
process_srv() has been split into three parts :
- tcp_get_connection() obtains a connection to the server
- tcp_connection_failed() tests if a previously attempted
connection has succeeded or not.
- process_srv_data() only manages the data phase, and in
this sense should be roughly equivalent to process_cli.
Little code has been removed, and a lot of old code has been
left in comments for now.
It's a shame not to use buffer->wex for connection timeouts since by
definition it cannot be used till the connection is not established.
Using it instead of ->cex also makes the buffer processing more
symmetric.
It is not always convenient to run checks on req->l in functions to
check if a buffer is empty or full. Now the stream_sock functions
set flags BF_EMPTY and BF_FULL according to the buffer contents. Of
course, functions which touch the buffer contents adjust the flags
too.
BF_SHUTR_PENDING and BF_SHUTW_PENDING were poor ideas because
BF_SHUTR is the pending of BF_SHUTW_DONE and BF_SHUTW is the
pending of BF_SHUTR_DONE. Remove those two useless and confusing
"pending" versions and rename buffer_shut{r,w}_* functions.
A new member has been added to the struct session. It keeps a trace
of what block of code performs a close or a shutdown on a socket, and
in what sequence. This is extremely convenient for post-mortem analysis
where flag combinations and states seem impossible. A new ABORT_NOW()
macro has also been added to make the code immediately segfault where
called.
The SV_STANALYZE state was installed on the server side but was really
meant to be processed with the rest of the request on the client side.
It suffered from several issues, mostly related to the way timeouts were
handled while waiting for data.
All known issues related to timeouts during a request - and specifically
a request involving body processing - have been raised and fixed. At this
point, the code is a bit dirty but works fine, so next steps might be
cleanups with an ability to come back to the current state in case of
trouble.
This is a first attempt at separating data processing from the
TCP state machine. Those two states have been replaced with flags
in the session indicating what needs to be analyzed. The corresponding
code is still called before and in lieu of TCP states.
Next change should get rid of the specific SV_STANALYZE which is in
fact a client state.
Then next change should consist in making it possible to analyze
TCP contents while being in CL_STDATA (or CL_STSHUT*).
It should be stated as a rule that a C file should never
include types/xxx.h when proto/xxx.h exists, as it gives
less exposure to declaration conflicts (one of which was
caught and fixed here) and it complicates the file headers
for nothing.
Only types/global.h, types/capture.h and types/polling.h
have been found to be valid includes from C files.
This is the first attempt at moving all internal parts from
using struct timeval to integer ticks. Those provides simpler
and faster code due to simplified operations, and this change
also saved about 64 bytes per session.
A new header file has been added : include/common/ticks.h.
It is possible that some functions should finally not be inlined
because they're used quite a lot (eg: tick_first, tick_add_ifset
and tick_is_expired). More measurements are required in order to
decide whether this is interesting or not.
Some function and variable names are still subject to change for
a better overall logics.
The run queue scheduler now considers task->nice to queue a task and
to pick a task out of the queue. This makes it possible to boost the
access to statistics (both via HTTP and UNIX socket). The UNIX socket
receives twice as much a boost as the HTTP socket because it is more
sensible.
The ultree code has been removed in favor of a simpler and
cleaner ebtree implementation. The eternity queue does not
need to exist anymore, and the pool_tree64 has been removed.
The ebtree node is stored in the task itself. The qlist list
header is still used by the run-queue, but will be able to
disappear once the run-queue uses ebtree too.
The dequeuing logic was completely wrong. First, a task was assigned
to all servers to process the queue, but this task was never scheduled
and was only woken up on session free. Second, there was no reservation
of server entries when a task was assigned a server. This means that
as long as the task was not connected to the server, its presence was
not accounted for. This was causing trouble when detecting whether or
not a server had reached maxconn. Third, during a redispatch, a session
could lose its place at the server's and get blocked because another
session at the same moment would have stolen the entry. Fourth, the
redispatch option did not work when maxqueue was reached for a server,
and it was not possible to do so without indefinitely hanging a session.
The root cause of all those problems was the lack of pre-reservation of
connections at the server's, and the lack of tracking of servers during
a redispatch. Everything relied on combinations of flags which could
appear similarly in quite distinct situations.
This patch is a major rework but there was no other solution, as the
internal logic was deeply flawed. The resulting code is cleaner, more
understandable, uses less magics and is overall more robust.
As an added bonus, "option redispatch" now works when maxqueue has
been reached on a server.
Due to the way the stats socket work, it was not possible to
maintain the information related to the command entered, so
after filling a whole buffer, the request was lost and it was
considered that there was nothing to write anymore.
The major reason was that some flags were passed directly
during the first call to stats_dump_raw() instead of being
stored persistently in the session.
To definitely fix this problem, flags were added to the stats
member of the session structure.
A second problem appeared. When the stats were produced, a first
call to client_retnclose() was performed, then one or multiple
subsequent calls to buffer_write_chunks() were done. But once the
stats buffer was full and a reschedule operated, the buffer was
flushed, the write flag cleared from the buffer and nothing was
done to re-arm it.
For this reason, a check was added in the proto_uxst_stats()
function in order to re-call the client FSM when data were added
by stats_dump_raw(). Finally, the whole unix stats dump FSM was
rewritten to avoid all the magics it depended on. It is now
simpler and looks more like the HTTP one.
Currently there is a ~16KB limit for a data size passed via unix socket.
It is caused by a trivial bug ttat is going to fixed soon, however
in most cases there is no need to dump a full stats.
This patch makes possible to select a scope of dumped data by extending
current "show stat" to "show stat [<iid> <type> <sid>]":
- iid is a proxy id, -1 to dump all proxies
- type selects type of dumpable objects: 1 for frontend, 2 for backend, 4 for
server, -1 for all types. Values can be ORed, for example:
1+2=3 -> frontend+backend.
1+2+4=7 -> frontend+backend+server.
- sid is a service id, -1 to dump everything from the selected proxy.
To do this I implemented a new session flag (SN_STAT_BOUND), added three
variables in data_ctx.stats (iid, type, sid), modified dumpstats.c and
completely revorked the process_uxst_stats: now it waits for a "\n"
terminated string, splits args and uses them. BTW: It should be quite easy
to add new commands, for example to enable/disable servers, the only problem
I can see is a not very lucky config name (*stats* socket). :|
During the work I also fixed two bug:
- s->flags were not initialized for proto_uxst
- missing comma if throttling not enabled (caused by a stupid change in
"Implement persistent id for proxies and servers")
Other changes:
- No more magic type valuse, use STATS_TYPE_FE/STATS_TYPE_BE/STATS_TYPE_SV
- Don't memset full s->data_ctx (it was clearing s->data_ctx.stats.{iid/type/sid},
instead initialize stats.sv & stats.sv_st (stats.px and stats.px_st were already
initialized)
With all that changes it was extremely easy to write a short perl plugin
for a perl-enabled net-snmp (also included in this patch).
29385 is my PEN (Private Enterprise Number) and I'm willing to donate
the SNMPv2-SMI::enterprises.29385.106.* OIDs for HAProxy if there
is nothing assigned already.
Due to the way Linux delivers EPOLLIN and EPOLLHUP, a closed connection
received after some server data sometimes results in truncated responses
if the client disconnects before server starts to respond. The reason
is that the EPOLLHUP flag is processed as an indication of end of
transfer while some data may remain in the system's socket buffers.
This problem could only be triggered with sepoll, although nothing should
prevent it from happening with normal epoll. In fact, the work factoring
performed by sepoll increases the risk that this bug appears.
The fix consists in making FD_POLL_HUP and FD_POLL_ERR sticky and that
they are only checked if FD_POLL_IN is not set, meaning that we have
read all pending data.
That way, the problem is definitely fixed and sepoll still remains about
17% faster than epoll since it can take into account all information
returned by the kernel.
It is sometimes required to know some informations such as the
process uptime when consulting statistics. This patch adds the
"show info" command to query those informations on the UNIX
socket.
By default, counters used for statistics calculation are incremented
only when a session finishes. It works quite well when serving small
objects, but with big ones (for example large images or archives) or
with A/V streaming, a graph generated from haproxy counters looks like
a hedgehog.
This patch implements a contstats (continous statistics) option.
When set counters get incremented continuously, during a whole session.
Recounting touches a hotpath directly so it is not enabled by default,
as it has small performance impact (~0.5%).
It is important that unbind_listener() calls fd_delete() to remove
a file descriptor, because only this one can update the fdtab and
the maxfd entries.
There was a missing state for listeners, when they are not listening
but still attached to the protocol. The LI_ASSIGNED state was added
for this purpose. This permitted to clean up the assignment/release
workflow quite a bit. Generic enable/enable_all/disable/disable_all
primitives were added, and a disable_all entry was added to the
struct protocol.
A unix socket can now access the statistics. It currently only
recognizes the "show stat\n" command at the beginning of the
input, then returns the statistics in CSV format.
A new file, proto_uxst.c, implements support of PF_UNIX sockets
of type SOCK_STREAM. It relies on generic stream_sock_read/write
and uses its own accept primitive which also tries to be generic.
Right now it only implements an echo service in sight of a general
support for start dumping via unix socket. The echo code is more
of a proof of concept than useful code.
