When building with DEBUG_MEMORY_POOLS, an element returned from the
cache would not have its pool link initialized unless it's allocated
using pool_alloc(). This is problematic for buffer allocators which
use pool_alloc_dirty(), as freeing this object will make the code
think it was allocated from another pool. This patch does two things :
- make __pool_get_from_cache() set the link
- remove the extra initialization from pool_alloc() since it's always
done in either __pool_get_first() or __pool_refill_alloc()
This patch is marked MINOR since it only affects code explicitly built
for debugging. No backport is needed.
When mapping memory with mmap(), we should use a fd of -1, not 0. 0 may
work on linux, but it doesn't work on FreeBSD, and probably other OSes.
It would be nice to backport this to 1.8 to help debugging there.
Commit ac6c880 ("BUILD: memory: fix pointer declaration for atomic CAS")
attemtped to fix a build warning affecting the lock-free version of the
pool allocator. But the fix tried to hide the cause instead of addressing
it, thus clang still complains about (void **) not matching (void ***).
The real solution is to declare free_list (void **) and not to use a cast.
Now this builds fine with gcc/clang with and without threads.
No backport is needed.
The purpose is to detect if threads or processes are competing for the
same CPU. This can happen when threads are incorrectly bound, or after a
reload if the previous process still has an important activity. With
threads this situation is problematic because a preempted thread holding
a lock will block other ones waiting for this lock to be released.
A first attempt consisted in measuring the cumulated lost time more
precisely but the system's scheduler is smart enough to try to limit the
thread preemption rate by mostly context switching during poll()'s blank
periods, so most of the time lost is not seen. In essence this is good
because it means a thread is not preempted with a lock held, and even
regarding the rendez-vous point it cannot prevent the other ones from
making progress. But still it happens tens to hundreds of times per
second that a thread might be preempted, so it's still possible to detect
that the situation is happening, thus it's interesting to measure and
report its frequency.
Each time we enter the poller, we check the CPU time spent working and
see if we've lost time doing something else. To limit false positives,
we're only interested in losses of 500 microseconds or more (i.e. half
a clock tick on a 1 kHz system). If so, it indicates that some time was
stolen by another thread or process. Note that we purposely store some
sub-millisecond counters so that under heavy traffic with a 1 kHz clock,
it's still possible to measure something without being subject to the
risk of rounding errors (i.e. if exactly 1 ms is stolen it's possible
that the time difference could often be slightly lower).
This counter of lost CPU time slots time is reported in "show activity"
in numbers of milliseconds of CPU lost per second, per 15s, and total
over the process' life. By definition, the per-second counter cannot
report values larger than 1000 per thread per second and the 15s one
will be limited to 15000/s in the worst case, but it's possible that
peak values exceed such thresholds after long pauses.
These two functions retrieve respectively the monotonic clock time and
the per-thread CPU time when available on the platform, or return zero.
These syscalls may require to link with -lrt on certain libc, which is
enabled in the Makefile with USE_RT=1 (default on Linux systems).
The calls to HA_ATOMIC_CAS() on the lockfree version of the pool allocator
were mistakenly done on (void*) for the old value instead of (void **).
While this has no impact on "recent" gcc, it does have one for gcc < 4.7
since the CAS was open coded and it's not possible to assign a temporary
variable of type "void".
No backport is needed, this only affects 1.9.
By placing this code into time.h (tv_entering_poll() and tv_leaving_poll())
we can remove the logic from the pollers and prepare for extending this to
offer more accurate time measurements.
The 4 pollers all contain the same code used to compute the poll timeout.
This is pointless, let's centralize this into fd.h. This also gets rid of
the useless SCHEDULER_RESOLUTION macro which used to work arond a very old
linux 2.2 bug causing select() to wake up slightly before the timeout.
Each thread now keeps the last ~512 kB of freed objects into a local
cache. There are some heuristics involved so that a specific pool cannot
use more than 1/8 of the total cache in number of objects. Tests have
shown that 512 kB is an optimal size on a 24-thread test running on a
dual-socket machine, resulting in an overall 7.5% performance increase
and a cache miss ratio reducing from 19.2 to 17.7%. Anyway it seems
pointless to keep more than an L2 cache, which probably explains why
sizes between 256 and 512 kB are optimal.
Cached objects appear in two lists, one per pool and one LRU to help
with fair eviction. Currently there is no way to check each thread's
cache state nor to flush it. This cache cannot be disabled and is
enabled as soon as the lockless pools are enabled (i.e.: threads are
enabled, no pool debugging is in use and the CPU supports a double word
CAS).
For caching it will be convenient to have indexes associated with pools,
without having to dereference the pool itself. One solution could consist
in replacing all pool pointers with integers but this would limit the
number of allocatable pools. Instead here we allocate the 32 first pools
from a pre-allocated array whose base address is known so that it's trivial
to convert a pool to an index in this array. Pools that cannot fit there
will be allocated normally.
This statement is used as a hint for the compiler so that it knows that
the location where it's placed cannot be reached. It will mostly be used
after longjmp() or equivalent statements that deal with error processing
and that the compiler doesn't know will not return on certain conditions,
so that it doesn't complain about null dereferences on error paths.
HTTP_FLG_* and HTTP_IS_* were moved from "proto/proto_http.h" to "common/http.h"
but the associated comment was forgotten during the move.
This is 1.9-specific and should not be backported.
This call is now used quite a bit in the fd cache, to decide which cache
to add/remove the fd to/from, when waking up a task for a single thread
in __task_wakeup(), in fd_cant_recv() and in fd_process_cached_events(),
and we can replace it with a single instruction, removing ~30 instructions
and ~80 bytes from the inner loop of some of these functions.
In addition the test for zero value was replaced with a comment saying
that it is illegal and leads to an undefined behaviour. The code does
not make use of this useless case today.
In commit f161d0f51 ("BUG/MINOR: pools/threads: don't ignore DEBUG_UAF
on double-word CAS capable archs") I moved some defines and accidently
messed up with lockfree pools. The problem is that the HA_HAVE_CAS_DW
macro is not defined anymore where the CONFIG_HAP_LOCKLESS_POOLS macro
is set, so this fix implicitly disabled lockfree pools.
This patch fixes this by moving the capabilities definition to config.h
(probably that we'd benefit from having an "arch.h" file to declare the
capabilities offered by the architecture). In a test on a 12-core machine,
we used to measure 19s spent in the pool lock for 1M requests without
this patch, and 0 with it so that's definitely a net saving.
No backport is required, this is only for 1.9.
OpenSSL released support for TLSv1.3. It also added a separate function
SSL_CTX_set_ciphersuites that is used to set the ciphers used in the
TLS 1.3 handshake. This change adds support for that new configuration
option by adding a ciphersuites configuration variable that works
essentially the same as the existing ciphers setting.
Note that it should likely be backported to 1.8 in order to ease usage
of the now released openssl-1.1.1.
In ci_insert_line2() and b_rep_blk(), we can't afford to wrap, so don't use
b_tail() to check if we do, use __b_tail() instead.
This should be backported to previous versions.
The current proto_http.c file is huge and contains different processing
domains making it very difficult to work on an alternative representation.
This commit moves some parts to other files :
- ACL registration code => http_acl.c
This code only creates some ACL mappings and doesn't know anything
about HTTP nor about the representation. This code could even have
moved to acl.c but it was not worth polluting it again.
- HTTP sample conversion => http_conv.c
This code doesn't depend on the internal representation but definitely
manipulates some HTTP elements, such as dates. It also has access to
captures.
- HTTP sample fetching => http_fetch.c
This code does depend entirely on the internal representation but is
totally independent on the analysers. Placing it into a different
file will ease the transition to the new representation and the
creation of a wrapper if required. An include file was created due
to CHECK_HTTP_MESSAGE_FIRST() being used at various places.
- HTTP action registration => http_act.c
This code doesn't directly interact with the messages nor the
transaction but it does so via some exported http functions like
http_replace_req_line() or http_set_status() so it will be easier
to change only this after the conversion.
- a few very generic parts were found and moved to http.{c,h} as
relevant.
It is worth noting that the functions moved to these new files are not
referenced anywhere outside of the files and are only called as registered
callbacks, so these files do not even require associated include files.
Tim Dsterhus found using afl-fuzz that some parts of the HPACK decoder
use incorrect bounds checking which do not catch negative values after
a type cast. The first culprit is hpack_valid_idx() which takes a signed
int and is fed with an unsigned one, but a few others are affected as
well due to being designed to work with an uint16_t as in the table
header, thus not being able to detect the high offset bits, though they
are not exposed if hpack_valid_idx() is fixed.
The impact is that the HPACK decoder can be crashed by an out-of-bounds
read. The only work-around without this patch is to disable H2 in the
configuration.
CVE-2018-14645 was assigned to this bug.
This patch addresses all of these issues at once. It must be backported
to 1.8.
These two functions were apparently written on the same model as their
parents when added by commit 11bcb6c4f ("[MEDIUM] IPv6 support for syslog")
except that they perform an assignment instead of a return, and as a
result fall through the next case where the assigned value may possibly
be partially overwritten. At least under Linux the port offset is the
same in both sockaddr_in and sockaddr_in6 so the value is written twice
without side effects.
This needs to be backported as far as 1.5.
This protocol is based on the uxst one, but it uses socketpair and FD
passing insteads of a connect()/accept().
The "sockpair@" prefix has been implemented for both bind and server
keywords.
When HAProxy wants to connect through a sockpair@, it creates 2 new
sockets using the socketpair() syscall and pass one of the socket
through the FD specified on the server line.
On the bind side, haproxy will receive the FD, and will use it like it
was the FD of an accept() syscall.
This protocol was designed for internal communication within HAProxy
between the master and the workers, but it's possible to use it
externaly with a wrapper and pass the FD through environment variabls.
The following functions only deal with header field values and are agnostic
to the HTTP version so they were moved to http.c :
http_header_match2(), find_hdr_value_end(), find_cookie_value_end(),
extract_cookie_value(), parse_qvalue(), http_find_url_param_pos(),
http_find_next_url_param().
Those lacking the "http_" prefix were modified to have it.
These error codes and messages are agnostic to the version, even if
they are represented as HTTP/1.0 messages. Ultimately they will have
to be transformed into internal HTTP messages to be used everywhere.
The HTTP/1.1 100 Continue message was turned to an IST and the local
copy in the Lua code was removed.
This function is purely HTTP once http_txn is put aside. So the original
one was renamed to http_txn_get_path() and it extracts the relevant offsets
from the txn to pass them to http_get_path(). One benefit of the new version
is that it returns the length at the same time so that allowed to slightly
simplify http_get_path_from_string() which had to look up the end pointer
previously and which is not needed anymore.
It's a bit painful to have to deal with HTTP semantics for each protocol
version (H1 and H2), and working on the version-agnostic code further
emphasizes the problem.
This patch creates http.h and http.c which are agnostic to the version
in use, and which borrow a few parts from proto_http and from h1. For
example the once thought h1-specific h1_char_classes array is in fact
dictated by RFC7231 and is used to parse HTTP headers. A few changes
were made to a few files which were including proto_http.h while they
only needed http.h.
Certain string definitions pre-dated the introduction of indirect
strings (ist) so some were used to simplify the definition of the known
HTTP methods. The current lookup code saves 2 kB of a heavily used table
and is faster than the previous table based lookup (typ. 14 ns vs 16
before).
This function was split in two at commit f7d0447 ("MINOR: buffers:
split b_putblk() into __b_putblk()") but it's wrong, the first half's
length is not adjusted to the requested size so it copies more than
desired.
This is purely 1.9-specific, no backport is needed.
We've been missing it several times and now we'll need it to increment
a request counter. Let's do it once for all.
This patch will need to be backported to 1.8 with the associated fix.
Since commit 843b7cb ("MEDIUM: chunks: make the chunk struct's fields
match the buffer struct") a chunk length is unsigned so we can remove
negative size checks.
The update lock was removed by the commit 91c2826e1 ("CLEANUP: server: remove
the update list and the update lock"). But the lock label was not which makes
the compilation fail in debug mode.
pour vos modifications. Les lignes # commençant par '#' seront ignorées, et un
message vide abandonne la validation. # # Sur la branche temp # Votre branche
est en avance sur 'origin/master' de 87 commits. # (utilisez "git push" pour
publier vos commits locaux) # # Modifications qui seront validées : # modifié :
include/common/hathreads.h #
When b_slow_realign is called with the <output> parameter equal to 0, the
buffer's head, after the realign, must be set to 0. It was errornously set to
the buffer's size, because there was no test on the value of <output>.
The current synchronization point enforces certain restrictions which
are hard to workaround in certain areas of the code. The fact that the
critical code can only be called from the sync point itself is a problem
for some callback-driven parts. The "show fd" command for example is
fragile regarding this.
Also it is expensive in terms of CPU usage because it wakes every other
thread just to be sure all of them join to the rendez-vous point. It's a
problem because the sleeping threads would not need to be woken up just
to know they're doing nothing.
Here we implement a different approach. We keep track of harmless threads,
which are defined as those either doing nothing, or doing harmless things.
The rendez-vous is used "for others" as a way for a thread to isolate itself.
A thread then requests to be alone using thread_isolate() when approaching
the dangerous area, and then waits until all other threads are either doing
the same or are doing something harmless (typically polling). The function
only returns once the thread is guaranteed to be alone, and the critical
section is terminated using thread_release().
When threads are disabled, some variables such as tid and tid_bit are
still checked everywhere, the MAX_THREADS_MASK macro is ~0UL while
MAX_THREADS is 1, and the all_threads_mask variable is replaced with a
macro forced to zero. The compiler cannot optimize away all this code
involving checks on tid and tid_bit, and we end up in special cases
where all_threads_mask has to be specifically tested for being zero or
not. It is not even certain the code paths are always equivalent when
testing without threads and with nbthread 1.
Let's change this to make sure we always present a single thread when
threads are disabled, and have the relevant values declared as constants
so that the compiler can optimize all the tests away. Now we have
MAX_THREADS_MASK set to 1, all_threads_mask set to 1, tid set to zero
and tid_bit set to 1. Doing just this has removed 4 kB of code in the
no-thread case.
A few checks for all_threads_mask==0 have been removed since it never
happens anymore.
An offsetof() macro was introduced with commit 928fbfa ("MINOR: compiler:
introduce offsetoff().") with a fallback for older compilers. But this
breaks gcc 3.4 because __size_t and __uintptr_t are not defined there.
However size_t and uintptr_t are, so let's fix it this way. No backport
needed.
The purpose is to make sure that all variables which directly depend
on this nbthread argument are set at the right moment. For now only
all_threads_mask needs to be set. It used to be set while calling
thread_sync_init() which is called too late for certain checks. The
same function handles threads and non-threads, which removes the need
for some thread-specific knowledge from cfgparse.c.
If nbthread is MAX_THREADS, the shift operation needed to compute
all_threads_mask fails in thread_sync_init(). Instead pass a number
of threads to this function and let it compute the mask without
overflowing.
This should be backported to 1.8.
This lock was necessary to manipulate the pendconn element between
concurrent places, but was causing great difficulties in the list walk
by having to iterate over multiple entries instead of being able to
safely pick the first one (in fact the first element was always the
right one but the locking model was hard to prove).
Here since we know we can always rely on the queue's locks, we take
the queue's lock every time we need to modify the element. In practice
it was already the case everywhere except in pendconn_dequeue() which
only works on an element that was already detached. This function had
to be protected against the risk of meeting an incompletely detached
element (which could be unlinked but not yet assigned). By taking the
queue lock around the LIST_ISEMPTY test, it's enough to ensure that a
concurrent thread either didn't begin or had completed the operation.
The true benefit really is in pendconn_process_next_strm() where we
can again safely work with the first element of each queue. This will
significantly simplify next updates to this code.
Whenever it's possible to avoid a copy, b_xfer() will simply swap the
buffer's heads without touching the data. This has brought the performance
back from 140 kH/s to 202 kH/s on the test case.
The latter function is more suited to operations that don't require any
check because the check has already been performed. It will be used by
other b_* functions.
This function is used a lot in block copies and is needlessly
complicated since it still uses pointer arithmetic. Let's fall
back to regular offsets and simplify it. This removed around
23 bytes from b_putblk() and it removed any conditional jump.
In thread_sync_barrier, we exit when all threads have set their own bit in the
barrier mask. It is done by comparing it to all_threads_mask. But we must not
use a simple equality to do so, becaue all_threads_mask may change. Since commit
ba86c6c25 ("MINOR: threads: Be sure to remove threads from all_threads_mask on
exit"), when a thread exit, its bit is removed from all_threads_mask. Instead,
we must use a bitwise AND to test is all bits of all_threads_mask are set.
This also requires that all_threads_mask is set to volatile if we want to
catch changes.
This patch must be backported in 1.8.
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
Now the buffers only contain the header and a pointer to the storage
area which can be anywhere. This will significantly simplify buffer
swapping and will make it possible to map chunks on buffers as well.
The buf_empty variable was removed, as now it's enough to have size==0
and area==NULL to designate the empty buffer (thus a non-allocated head
is the empty buffer by default). buf_wanted for now is indicated by
size==0 and area==(void *)1.
The channels and the checks now embed the buffer's head, and the only
pointer is to the storage area. This slightly increases the unallocated
buffer size (3 extra ints for the empty buffer) but considerably
simplifies dynamic buffer management. It will also later permit to
detach unused checks.
The way the struct buffer is arranged has proven quite efficient on a
number of tests, which makes sense given that size is always accessed
and often first, followed by the othe ones.
It used to be called 'len' during the reorganisation but strictly speaking
it's not a length since it wraps. Also we already use '_data' as the suffix
to count available data, and data is also what we use to indicate the amount
of data in a pipe so let's improve consistency here. It was important to do
this in two operations because data used to be the name of the pointer to
the storage area.
This one is more generic and designed to work on a random block. It
may later get a b_rep_ist() variant since many strings are already
available as (ptr,len).
There was no point keeping that function in the buffer part since it's
exclusively used by HTTP at the channel level, since it also automatically
appends the CRLF. This further cleans up the buffer code.
The new file istbuf.h links the indirect strings (ist) with the buffers.
The purpose is to encourage addition of more standard buffer manipulation
functions that rely on this in order to improve the overall ease of use
along all the code. Just like ist.h and buf.h, this new file is not
expected to depend on anything beyond these two files.
A few functions were added and/or converted from buffer.h :
- b_isteq() : indicates if a buffer and a string match
- b_isteat() : consumes a string from the buffer if it matches
- b_istput() : appends a small string to a buffer (all or none)
- b_putist() : appends part of a large string to a buffer
The equivalent functions were removed from buffer.h and changed at the
various call places.
The two variants now do exactly the same (appending at the tail of the
buffer) so let's not keep the distinction between these classes of
functions and have generic ones for this. It's also worth noting that
b{i,o}_putchk() wasn't used at all and was removed.
There's no distinction between in and out data now. The latter covers
the needs of the former and supports wrapping. The extra cost is
negligible given the locations where it's used.
Since we never access this field directly anymore, but only through the
channel's wrappers, it can now move to the channel. The buffers are now
completely free from the distinction between input and output data.
Since we use "_data" for the amount of data at many places, as opposed to
"_space" for the amount of space, let's rename the "data" field to "area"
so that we can reuse "data" later for the amount of data in the buffer
(currently called "len" despite not being contigous).
b_set_data() is used :
- in proto_http and hlua to trim input data (b_set_data(co_data()))
- in SPOE to append data to a buffer while building a message
In no case will this truncate a buffer so we can safely remove the
test for len < b->output.
b_del() is used in :
- mux_h2 with the demux buffer : always processes input data
- checks with output data though output is not considered at all there
- b_eat() which is not used anywhere
- co_skip() where the len is always <= output
Thus the distinction for output data is not needed anymore and the
decrement can be made inconditionally in co_skip().
This is intentionally the minimal and safest set of changes, some cleanups
area still required. These changes are quite tricky and cannot be
independantly tested, so it's important to keep this patch as bisectable
as possible.
buf_empty and buf_wanted were changed and are now exactly similar since
there's no <p> member in the structure anymore. Given that no test is
ever made in the code to check that buf == &buf_wanted, it may be possible
that we don't need to have two anymore, unless some buf_empty tests have
precedence. This will have to be investigated.
A significant part of this commit affects the HTTP compression code,
which used to deeply manipulate the input and output buffers without
any reasonable solution for a better abstraction. For this reason, if
any regression is met and designates this patch as the culprit, it is
important to run tests which specifically involve compression or which
definitely don't use it in order to spot the issue.
Cc: Olivier Houchard <ohouchard@haproxy.com>
For the same consistency reasons, let's use b_empty() at the few places
where an empty buffer is expected, or c_empty() if it's done on a channel.
Some of these places were there to realign the buffer so
{b,c}_realign_if_empty() was used instead.
We used to have variations around buffer_total_space() and
size-buffer_len() or size-b_data(). Let's simplify all this. buffer_len()
was also removed as not used anymore.
Now the new API functions are being used everywhere, we can get rid
of b_ptr(). A few last users like bi_istput() and bo_istput() appear
to only differ by what part of the buffer they're increasing, but
that should quickly be merged.
Now that there are no more users requiring to modify the buffer anymore,
switch these ones to const char and const buffer. This will make it more
obvious next time send functions are tempted to modify the buffer's output
count. Minor adaptations were necessary at a few call places which were
using char due to the function's previous prototype.
Till now the callers had to know which one to call for specific use cases.
Let's fuse them now since a single one will remain after the API migration.
Given that bi_del() may only be used where o==0, just combine the two tests
by first removing output data then only input.
This will be important so that we can parse a buffer without touching it.
Now we indicate where from the buffer's head we plan to start to copy, and
for how many bytes. This will be used by send functions to loop at the end
of the buffer without having to update the buffer's output byte count.
This new functoin limits itself to the amount of data available in the
buffer and doesn't care about the direction anymore. It's only called
from co_getblk() which already checks that no more than the available
output bytes is requested.
These ones were merged into a single b_contig_space() that covers both
(the bo_ case was a simplified version of the other one). The function
doesn't use ->i nor ->o anymore.
This function was sometimes used from a channel and sometimes from a buffer.
In both cases it requires knowledge of the size of the output data (to skip
them). Here the split ensures the channel can deal with this point, and that
other places not having output data can continue to work.
These ones manipulate the output data count which will be specific to
the channel soon, so prepare the call points to use the channel only.
The b_* functions are now unused and were removed.
Where relevant, the channel version is used instead. The buffer version
was ported to be more generic and now takes a swap buffer and the output
byte count to know where to set the alignment point. The H2 mux still
uses buffer_slow_realign() with buf->o but it will change later.
Many places deal with buffer realignment after data removal. The method
is always the same : if the buffer is empty, set its pointer to the origin.
Let's have a function for this so that we have less code to change with the
new API.
Add a new function that lets you set the amount of input in a buffer.
For now it extends/truncates b->i except if the total length is
below b->o in which case it clears i and adjusts o.
Instead of doing b->i -= directly, introduce b_sub(), that does the job, to
make it easier to switch to the future API.
Also add b_add(), that increases b->i, instead of using it directly, and
bo_add(), that does increase b->o.
Here's the list of newly introduced functions :
- b_data(), returning the total amount of data in the buffer (currently i+o)
- b_orig(), returning the origin of the storage area, that is, the place of
position 0.
- b_wrap(), pointer to wrapping point (currently data+size)
- b_size(), returning the size of the buffer
- b_room(), returning the amount of bytes left available
- b_full(), returning true if the buffer is full, otherwise false
- b_stop(), pointer to end of data mark (currently p+i), used to compute
distances or a stop pointer for a loop.
- b_peek(), this one will help make the transition to the new buffer model.
It returns a pointer to a position in the buffer known from an offest
relative to the beginning of the data in the buffer. Thus, we can replace
the following occurrences :
bo_ptr(b) => b_peek(b, 0);
bo_end(b) => b_peek(b, b->o);
bi_ptr(b) => b_peek(b, b->o);
bi_end(b) => b_peek(b, b->i + b->o);
b_ptr(b, ofs) => b_peek(b, b->o + ofs);
- b_head(), pointer to the beginning of data (currently bo_ptr())
- b_tail(), pointer to first free place (currently bi_ptr())
- b_next() / b_next_ofs(), pointer to the next byte, taking wrapping
into account.
- b_dist(), returning the distance between two pointers belonging to a buffer
- b_reset(), which resets the buffer
- b_space_wraps(), indicating if the free space wraps around the buffer
- b_almost_full(), indicating if 3/4 or more of the buffer are used
Some of these are provided with the unchecked variants using the "__"
prefix, or with the "_ofs" suffix indicating they return a relative
position to the buffer's origin instead of a pointer.
Cc: Olivier Houchard <ohouchard@haproxy.com>
Passing unsigned ints everywhere is painful, and will cause some headache
later when we'll want to integrate better with struct ist which already
uses size_t. Let's switch buffers to use size_t instead.
The buffer code currently depends on pools and other stuff and is not
really autonomous anymore. The rewrite of the new API is an opportunity
to clean this up. This patch creates a new file (buf.h) which does not
depend on other elements and which will only contain what is needed to
perform the most basic buffer operations. The new API will be introduced
in this file and the conversion will be finished once buffer.h is empty.
The definition of struct buffer was moved to this new file, using more
explicity stdint types for the sizes and offsets.
Most new functions will be implemented in two variants :
__b_something() : unchecked variant, no wrapping is expected
b_something() : wrapping-checked variant
This way callers will be able to select which one to use depending on
the use cases.
The behavior of sigprocmask in an multithreaded environment is
undefined.
The new macro ha_sigmask() calls either pthreads_sigmask() or
sigprocmask() if haproxy was built with thread support or not.
This should be backported to 1.8.
A few users reported that building without threads was accidently broken
after commit 6b96f72 ("BUG/MEDIUM: pollers: Use a global list for fd
shared between threads.") due to all_threads_mask not being defined.
It's OK to set it to zero as other code parts do when threads are
enabled but only one thread is used.
This needs to be backported to 1.8.
With the old model, any fd shared by multiple threads, such as listeners
or dns sockets, would only be updated on one threads, so that could lead
to missed event, or spurious wakeups.
To avoid this, add a global list for fd that are shared, using the same
implementation as the fd cache, and only remove entries from this list
when every thread as updated its poller.
[wt: this will need to be backported to 1.8 but differently so this patch
must not be backported as-is]
We'll need this in order to support uploading chunks. The h2 to h1
converter checks for the presence of the content-length header field
as well as the CONNECT method and returns these information to the
caller. The caller indicates whether or not a body is detected for
the message (presence of END_STREAM or not). No transfer-encoding
header is emitted yet.
With gcc < 4.7, when HAProxy is built with threads, the macros
HA_ATOMIC_CAS/XCHG/STORE relies on the legacy __sync builtins. These macros
are slightly complicated than the versions relying on the '_atomic'
builtins. Internally, some local variables are defined, prefixed with '__' to
avoid name clashes with the caller.
On the other hand, the macros HA_ATOMIC_UPDATE_MIN/MAX call HA_ATOMIC_CAS. Some
local variables are also definied in these macros, following the same naming
rule as below. The problem is that '__new' variable is used in
HA_ATOMIC_MIN/_MAX and in HA_ATOMIC_CAS. Obviously, the behaviour is undefined
because '__new' in HA_ATOMIC_CAS is left uninitialized. Unfortunatly gcc fails
to detect this error.
To fix the problem, all internal variables to macros are now suffixed with name
of the macros to avoid clashes (for instance, '__new_cas' in HA_ATOMIC_CAS).
This patch must be backported in 1.8.
The management of the servers and the proxies queues was not thread-safe at
all. First, the accesses to <strm>->pend_pos were not protected. So it was
possible to release it on a thread (for instance because the stream is released)
and to use it in same time on another one (because we redispatch pending
connections for a server). Then, the accesses to stream's information (flags and
target) from anywhere is forbidden. To be safe, The stream's state must always
be updated in the context of process_stream.
So to fix these issues, the queue module has been refactored. A lock has been
added in the pendconn structure. And now, when we try to dequeue a pending
connection, we start by unlinking it from the server/proxy queue and we wake up
the stream. Then, it is the stream reponsibility to really dequeue it (or
release it). This way, we are sure that only the stream can create and release
its <pend_pos> field.
However, be careful. This new implementation should be thread-safe
(hopefully...). But it is not optimal and in some situations, it could be really
slower in multi-threaded mode than in single-threaded one. The problem is that,
when we try to dequeue pending connections, we process it from the older one to
the newer one independently to the thread's affinity. So we need to wait the
other threads' wakeup to really process them. If threads are blocked in the
poller, this will add a significant latency. This problem happens when maxconn
values are very low.
This patch must be backported in 1.8.
When the block of data need to be split to support the wrapping, the start of
the second block of data was wrong. We must be sure to skup data copied during
the first memcpy.
This patch must be backported to 1.8.
When the block of data need to be split to support the wrapping, the start of
the second block of data was wrong. We must be sure to skip data copied during
the first memcpy.
This patch must be backported to 1.8, 1.7, 1.6 and 1.5.
Since we use padding before the allocated page, it's trivial to place
the allocated address there and see if it gets mangled once we release
it.
This may be backported to stable releases already using DEBUG_UAF.
Commit 158fa75 ("MINOR: pools: implement DEBUG_UAF to detect use after free")
implemented pool use-after-free detection, but the mmap() return value isn't
properly checked, preventing the call to pool_alloc_area() from returning
NULL. So on out-of-memory a mangled pointer is returned, causing a crash on
the pool_alloc() site instead of forcing a GC. It doesn't affect regular
operations however, just complicates complex bug investigations.
This fix should be backported to 1.8 and to 1.7.
Since commit cf975d4 ("MINOR: pools/threads: Implement lockless memory
pools."), we support lockless pools. However the parts dedicated to
detecting use-after-free are not present in this part, making DEBUG_UAF
useless in this situation.
The present patch sets a new define CONFIG_HAP_LOCKLESS_POOLS when such
a compatible architecture is detected, and when pool debugging is not
requested, then makes use of this everywhere in pools and buffers
functions. This way enabling DEBUG_UAF will automatically disable the
lockless version.
No backport is needed as this is purely 1.9-dev.
This removes the end label from memory.h.
The labels are unused as of cf975d46bc
which is unreleased (and incidentally the first commit containing
those labels, thus they never have been used).
A TLS ticket keys file can be updated on the CLI and used in same time. So we
need to protect it to be sure all accesses are thread-safe. Because updates are
infrequent, a R/W lock has been used.
This patch must be backported in 1.8
Commit f61f0cb ("MINOR: threads: Introduce double-width CAS on x86_64
and arm.") introduced the double CAS. But the ARMv7 version is bogus,
it uses the value of the pointers instead of dereferencing them. When
lucky, it simply doesn't build due to impossible registers combinations.
Otherwise it will immediately crash at run time when facing traffic.
No backport is needed, this bug was introduced in 1.9-dev.
Create a local, per-thread, fdcache, for file descriptors that only belongs
to one thread, and make the global fd cache mostly lockless, as we can get
a lot of contention on the fd cache lock.
Recent changes to the enum were not synchronized with the lock debugging
code. Now we use a switch/case instead of an array so that the compiler
throws a warning if there is any inconsistency.
To be backported to 1.8 (at least to add the START entry).
Marc Fournier reported an interesting case when using threads with the
master-worker mode : sometimes, a listener would have its FD closed
during startup. Sometimes it could even be health checks seeing this.
What happens is that after the threads are created, and the pollers
enabled on each threads, the master-worker pipe is registered, and at
the same time a close() is performed on the write side of this pipe
since the children must not use it.
But since this is replicated in every thread, what happens is that the
first thread closes the pipe, thus releases the FD, and the next thread
starting a listener in parallel gets this FD reassigned. Then another
thread closes the FD again, which this time corresponds to the listener.
It can also happen with the health check sockets if they're started
early enough.
This patch splits the mworker_pipe_register() function in two, so that
the close() of the write side of the FD is performed very early after the
fork() and long before threads are created (we don't need to delay it
anyway). Only the pipe registration is done in the threaded code since
it is important that the pollers are properly allocated for this.
The mworker_pipe_register() function now takes care of registering the
pipe only once, and this is guaranteed by a new surrounding lock.
The call to protocol_enable_all() looks fragile in theory since it
scans the list of proxies and their listeners, though in practice
all threads scan the same list and take the same locks for each
listener so it's not possible that any of them escapes the process
and finishes before all listeners are started. And the operation is
idempotent.
This fix must be backported to 1.8. Thanks to Marc for providing very
detailed traces clearly showing the problem.
This one allows not to inflate some structures when threads are
disabled. Now struct global is 1.4 kB instead of 33 kB.
Should be backported to 1.8 for ease of backporting of upcoming
patches.
Till now the use of __atomic_* gcc builtins required gcc >= 4.7. Since
some supported and quite common operating systems like CentOS 6 still
come with older versions (4.4) and the mapping to the older builtins
is reasonably simple, let's implement it.
This code is only used for gcc < 4.7. It has been quickly tested on a
machine using gcc 4.4.4 and provided expected results.
This patch should be backported to 1.8.
In hpack_dht_make_room(), we try to fulfill this rule form RFC7541#4.4 :
"It is not an error to attempt to add an entry that is larger than the
maximum size; an attempt to add an entry larger than the maximum size
causes the table to be emptied of all existing entries and results in
an empty table."
Unfortunately it is not consistent with the way it's used in
hpack_dht_insert() as this last one will consider a success as a
confirmation it can copy the header into the table, and a failure as
an indexing error. This results in the two following issues :
- if a client sends too large a header into an empty table, this
header may overflow the table. Fortunately, most clients send
small headers like :authority first, and never mark headers that
don't fit into the table as indexable since it is counter-productive ;
- if a client sends too large a header into a populated table, the
operation fails after the table is totally flushed and the request
is not processed.
This patch fixes the two issues at once :
- a header not fitting into an empty table is always a sign that it
will never fit ;
- not fitting into the table is not an error
Thanks to Yves Lafon for reporting detailed traces demonstrating this
issue. This fix must be backported to 1.8.
If the hpack decoder sees an invalid header index, it emits value
"### ERR ###" that was used during debugging instead of rejecting the
block. This is harmless, and was detected by h2spec.
To backport to 1.8.
Released version 1.9-dev0 with the following main changes :
- BUG/MEDIUM: stream: don't automatically forward connect nor close
- BUG/MAJOR: stream: ensure analysers are always called upon close
- BUG/MINOR: stream-int: don't try to read again when CF_READ_DONTWAIT is set
- MEDIUM: mworker: Add systemd `Type=notify` support
- BUG/MEDIUM: cache: free callback to remove from tree
- CLEANUP: cache: remove unused struct
- MEDIUM: cache: enable the HTTP analysers
- CLEANUP: cache: remove wrong comment
- MINOR: threads/atomic: rename local variables in macros to avoid conflicts
- MINOR: threads/plock: rename local variables in macros to avoid conflicts
- MINOR: threads/atomic: implement pl_mb() in asm on x86
- MINOR: threads/atomic: implement pl_bts() on non-x86
- MINOR: threads/build: atomic: replace the few inlines with macros
- BUILD: threads/plock: fix a build issue on Clang without optimization
- BUILD: ebtree: don't redefine types u32/s32 in scope-aware trees
- BUILD: compiler: add a new type modifier __maybe_unused
- BUILD: h2: mark some inlined functions "unused"
- BUILD: server: check->desc always exists
- BUG/MEDIUM: h2: properly report connection errors in headers and data handlers
- MEDIUM: h2: add a function to emit an HTTP/1 request from a headers list
- MEDIUM: h2: change hpack_decode_headers() to only provide a list of headers
- BUG/MEDIUM: h2: always reassemble the Cookie request header field
- BUG/MINOR: systemd: ignore daemon mode
- CONTRIB: spoa_example: allow to compile outside HAProxy.
- CONTRIB: spoa_example: remove bref, wordlist, cond_wordlist
- CONTRIB: spoa_example: remove last dependencies on type "sample"
- CONTRIB: spoa_example: remove SPOE enums that are useless for clients
- CLEANUP: cache: reorder includes
- MEDIUM: shctx: use unsigned int for len and block_count
- MEDIUM: cache: "show cache" on the cli
- BUG/MEDIUM: cache: use key=0 as a condition for freeing
- BUG/MEDIUM: cache: refcount forbids to free the objects
- BUG/MEDIUM: cache fix cli_kws structure
- BUG/MEDIUM: deinit: correctly deinitialize the proxy and global listener tasks
- BUG/MINOR: ssl: Always start the handshake if we can't send early data.
- MINOR: ssl: Don't disable early data handling if we could not write.
- MINOR: pools: prepare functions to override malloc/free in pools
- MINOR: pools: implement DEBUG_UAF to detect use after free
- BUG/MEDIUM: threads/time: fix time drift correction
- BUG/MEDIUM: threads/time: maintain a common time reference between all threads
- MINOR: sample: Add "thread" sample fetch
- BUG/MINOR: Use crt_base instead of ca_base when crt is parsed on a server line
- BUG/MINOR: stream: fix tv_request calculation for applets
- BUG/MAJOR: h2: always remove a stream from the send list before freeing it
- BUG/MAJOR: threads/task: dequeue expired tasks under the WQ lock
- MINOR: ssl: Handle reading early data after writing better.
- MINOR: mux: Make sure every string is woken up after the handshake.
- MEDIUM: cache: store sha1 for hashing the cache key
- MINOR: http: implement the "http-request reject" rule
- MINOR: h2: send RST_STREAM before GOAWAY on reject
- MEDIUM: h2: don't gracefully close the connection anymore on Connection: close
- MINOR: h2: make use of client-fin timeout after GOAWAY
- MEDIUM: config: ensure that tune.bufsize is at least 16384 when using HTTP/2
- MINOR: ssl: Handle early data with BoringSSL
- BUG/MEDIUM: stream: always release the stream-interface on abort
- BUG/MEDIUM: cache: free ressources in chn_end_analyze
- MINOR: cache: move the refcount decrease in the applet release
- BUG/MINOR: listener: Allow multiple "process" options on "bind" lines
- MINOR: config: Support a range to specify processes in "cpu-map" parameter
- MINOR: config: Slightly change how parse_process_number works
- MINOR: config: Export parse_process_number and use it wherever it's applicable
- MINOR: standard: Add my_ffsl function to get the position of the bit set to one
- MINOR: config: Add auto-increment feature for cpu-map
- MINOR: config: Support partial ranges in cpu-map directive
- MINOR:: config: Remove thread-map directive
- MINOR: config: Add the threads support in cpu-map directive
- MINOR: config: Add threads support for "process" option on "bind" lines
- MEDIUM: listener: Bind listeners on a thread subset if specified
- CLEANUP: debug: Use DPRINTF instead of fprintf into #ifdef DEBUG_FULL/#endif
- CLEANUP: log: Rename Alert/Warning in ha_alert/ha_warning
- MINOR/CLEANUP: proxy: rename "proxy" to "proxies_list"
- CLEANUP: pools: rename all pool functions and pointers to remove this "2"
- DOC: update the roadmap file with the latest changes merged in 1.8
- DOC: fix mangled version in peers protocol documentation
- DOC: add initial peers protovol v2.0 documentation.
- DOC: mention William as maintainer of the cache and master-worker
- DOC: add Christopher and Emeric as maintainers of the threads
- MINOR: cache: replace a fprint() by an abort()
- MEDIUM: cache: max-age configuration keyword
- DOC: explain HTTP2 timeout behavior
- DOC: cache: configuration and management
- MAJOR: mworker: exits the master on failure
- BUG/MINOR: threads: don't drop "extern" on the lock in include files
- MINOR: task: keep a pointer to the currently running task
- MINOR: task: align the rq and wq locks
- MINOR: fd: cache-align fdtab and fdcache locks
- MINOR: buffers: cache-align buffer_wq_lock
- CLEANUP: server: reorder some fields in struct server to save 40 bytes
- CLEANUP: proxy: slightly reorder the struct proxy to reduce holes
- CLEANUP: checks: remove 16 bytes of holes in struct check
- CLEANUP: cache: more efficiently pack the struct cache
- CLEANUP: fd: place the lock at the beginning of struct fdtab
- CLEANUP: pools: align pools on a cache line
- DOC: config: add a few bits about how to configure HTTP/2
- BUG/MAJOR: threads/queue: avoid recursive locking in pendconn_get_next_strm()
- BUILD: Makefile: reorder object files by size
There are just a few pools, and they're stressed a lot, so it makes
sense to dedicate them a cache line to avoid contention and to place
the lock at the beginning.
Commit 9dcf9b6 ("MINOR: threads: Use __decl_hathreads to declare locks")
accidently lost a few "extern" in certain lock declarations, possibly
causing certain entries to be declared at multiple places. Apparently
it hasn't caused any harm though.
The offending ones were :
- fdtab_lock
- fdcache_lock
- poll_lock
- buffer_wq_lock
During the migration to the second version of the pools, the new
functions and pool pointers were all called "pool_something2()" and
"pool2_something". Now there's no more pool v1 code and it's a real
pain to still have to deal with this. Let's clean this up now by
removing the "2" everywhere, and by renaming the pool heads
"pool_head_something".
The prefix "auto:" can be added before the process set to let HAProxy
automatically bind a process to a CPU by incrementing process and CPU sets. To
be valid, both sets must have the same size. No matter the declaration order of
the CPU sets, it will be bound from the lower to the higher bound.
Examples:
# all these lines bind the process 1 to the cpu 0, the process 2 to cpu 1
# and so on.
cpu-map auto:1-4 0-3
cpu-map auto:1-4 0-1 2-3
cpu-map auto:1-4 3 2 1 0
# bind each process to exaclty one CPU using all/odd/even keyword
cpu-map auto:all 0-63
cpu-map auto:even 0-31
cpu-map auto:odd 32-63
# invalid cpu-map because process and CPU sets have different sizes.
cpu-map auto:1-4 0 # invalid
cpu-map auto:1 0-3 # invalid
This code has been used successfully a few times in the past to detect
that a pool was used after being freed. Its main goal is to allocate a
full page for each object so that they are always released individually
and unmapped from memory. This way if any part of the code reference the
object after is was freed and before it is reallocated, a segv occurs at
the exact offending location. It does a few extra things such as writing
to the memory area before freeing to detect double-frees and free of
read-only areas, and placing the data at the end of the page instead of
the beginning so that out of bounds accesses are easier to spot. The
amount of memory used with this is huge (about 10 times the regular
usage) but it can be useful sometimes.
The current H2 to H1 protocol conversion presents some issues which will
require to perform some processing on certain headers before writing them
so it's not possible to convert HPACK to H1 on the fly.
This commit modifies the headers decoding so that it now works in two
phases : hpack_decode_headers() only decodes the HPACK stream in the
HEADERS frame and puts the result into a list. Headers which require
storage (huffman-compressed or from the dynamic table) are stored in
a chunk allocated by the H2 demuxer. Then once the headers are properly
decoded into this list, h2_make_h1_request() is called with this list
to produce the HTTP/1.1 request into the destination buffer. The list
necessarily enforces a limit. Here we use 2*MAX_HTTP_HDR, which means
that we can have as many individual cookies as we have regular headers
if a client decides to break their cookies into multiple values. This
seams reasonable and will allow the H1 parser to decide whether it's
too much or not.
Thus the output stream is not produced on the fly anymore and this will
permit to deal with certain corner cases like reparing the Cookie header
(which for now is not done).
In order to limit header duplication and parsing, the known pseudo headers
continue to be passed by their index : the name element in the list then
has a NULL pointer and the value is the pseudo header's index. Given that
these ones represent about half of the incoming requests and need to be
found quickly, it maintains an acceptable level of performance.
The code was significantly reduced by doing this because the orignal code
had to deal with HPACK and H1 combinations (eg: index vs not indexed, etc)
and now the HPACK decoding is totally focused on the decompression, and
the H1 encoding doesn't have to deal with the issue of wrapping input for
example.
One bug was addressed here (though it couldn't happen at the moment). The
H2 demuxer used to detect a failure to write the request into the H1 buffer
and would then detect if the output buffer wraps, realign it and try again.
The problem by doing so was that the HPACK context was already modified and
not rewindable. Thus the size check is now performed first and a failure is
reported if it doesn't fit.
The current H2 to H1 protocol conversion presents some issues which will
require to perform some processing on certain headers before writing them
so it's not possible to convert HPACK to H1 on the fly.
Here we introduce a function which performs half of what hpack_decode_header()
used to do, which is to take a list of headers on input and emit the
corresponding request in HTTP/1.1 format. The code is the same and functions
were renamed to be prefixed with "h2" instead of "hpack", though it ends
up being simpler as the various HPACK-specific cases could be fused into
a single one (ie: add header).
Moving this part here makes a lot of sense as now this code is specific to
what is documented in HTTP/2 RFC 7540 and will be able to deal with special
cases related to H2 to H1 conversion enumerated in section 8.1.
Various error codes which were previously assigned to HPACK were never
used (aside being negative) and were all replaced by -1 with a comment
indicating what error was detected. The code could be further factored
thanks to this but this commit focuses on compatibility first.
This code is not yet used but builds fine.
While gcc only emits warnings about unused static functions, Clang also
emits such a warning when the functions are inlined. This is a bit
annoying at certain places where functions are provided to manipulate
multiple data types and are not yet used. Let's have a type modifier
"__maybe_unused" which sets the "unused" attribute like the Linux kernel
does. It's elegant as it allows the code author to indicate that it knows
that this element might be unused. It works on variables as well, which
is convenient to remove ifdefs around local variables in certain functions,
but doesn't work on labels.
Now we can show in dotted red the node being removed or surrounded in red
a node having been inserted, and add a description on the graph related to
the operation in progress for example.
b_alloc_margin is, strickly speeking, thread-safe. It will not crash
HAproxy. But its contract is not respected anymore in a multithreaded
environment. In this function, we need to be sure to have <margin> buffers
available in the pool after the allocation. So to have this guarantee, we must
lock the memory pool during all the operation. This also means, we must call
internal and lockless memory functions (prefixed with '__').
For the record, this patch fixes a pernicious bug happens after a soft reload
where some streams can be blocked infinitly, waiting for a buffer in the
buffer_wq list. This happens because, during a soft reload, pool_gc2 is called,
making some calls to b_alloc_fast fail.
This is specific to threads, no backport is needed.
This macro should be used to declare variables or struct members depending on
the USE_THREAD compile option. It avoids the encapsulation of such declarations
between #ifdef/#endif. It is used to declare all lock variables.
This small inline function causes some pain to the compiler when used
inside other functions due to its use of the unlikely() hint for non-digits.
It causes the letters to be processed far away in the calling function and
makes the code less efficient. Removing these unlikely() hints has increased
the chunk size parsing by around 5%.
The spin locks used to rely on W locks, which involve a loop waiting
for readers to leave, and this doesn't happen here. It's more efficient
to use S locks instead, which are also mutually exclusive and do not
have this loop. This saves one test per spinlock and a few tens of
bytes allowing certain functions to be inlined.
This function incorrectly dealt with the case where data doesn't
wrap but lies at the end of the buffer, resulting in Lukas' reported
data corruption with HTTP/2. No backport is needed, it was introduced
for HTTP/2 in 1.8-dev.
For now it only supports literals and a bit of static header table
references for the 9 most common header field names (date, server,
content-type, content-length, last-modified, accept-ranges, etag,
cache-control, location).
A previous incarnation of this commit used to strip the forbidden H2
header names (connection, proxy-connection, upgrade, transfer-encoding,
keep-alive) but this is no longer the case as this filtering is irrelevant
to HPACK encoding and is specific to H2, so this will have to be done by
the caller.
It's quite not optimal but works fine enough to prepare some valid and
partially compressed responses during development.
The decoder is now fully functional. It makes use of the dynamic header
table. Dynamic header table size updates are currently ignored, as our
initially advertised value is the highest we support. Strictly speaking,
the impact is that a client referencing a header field after such an
update wouldn't observe an error instead of the connection being dropped
if it was implemented.
Decoded header fields are copied into a target buffer in HTTP/1 format
using HTTP/1.1 as the version. The Host header field is automatically
appended if a ":authority" header field is present.
All decoded header fields can be displayed if the file is compiled with
DEBUG_HPACK.
This code deals with header insertion, retrieval and eviction, as well
as with dynamic header table defragmentation. It is functional for use
as a decoder and was heavily tested in this context. There's still some
room for optimization (eg: the defragmentation code currently does it
in place using a memcpy).
Also for now the dynamic header table is allocated using malloc() while
a pool needs to be created instead.
This code was mostly imported from https://github.com/wtarreau/http2-exp
with "hpack_" prepended in front of most names to avoid risks of conflicts.
Some small cleanups and renamings were applied during the import. This
version must be considered more recent.
Some HPACK error codes were placed here (HPACK_ERR_*), not exactly because
they're needed by the decoder but they'll be needed by all callers. Maybe
a different location should be found.
The code was borrowed from the HPACK experimental implementations
available here :
https://github.com/wtarreau/http2-exp
It contains the Huffman table as specified in RFC7541 Appendix B, and a
set of reverse tables used to decode a Huffman byte stream, and produced
by contrib/h2/gen-rht. The encoder is not finalized, it doesn't emit the
byte stream but this is not needed for now.
There was a flaw in the way the threads was created. the main one was just used
to create all the others and just wait to exit. Now, it is used to run a poll
loop. So we only create nbthread-1 threads.
This also fixes a bug about the compression filter when there is only 1 thread
(nbthread == 1 or no threads support). The bug was in the way thread-local
resources was initialized. per-thread init/deinit callbacks were never called
for the main process. So, with nthread set to 1, some buffers remained
uninitialized.
Because there is not migration mechanism yet, all runtime information about an
SPOE agent are thread-local and async exchanges with agents are disabled when we
have serveral threads. Howerver, pipelining is still available. So for now, the
thread part of the SPOE is pretty simple.
Note that the Lua processing is not really thread safe. It provides
heavy system which consists to add our own lock function in the Lua
code and recompile the library. This system will probably not accepted
by maintainers of various distribs.
Our main excution point of the Lua is the function lua_resume(). A
quick looking on the Lua sources displays a lua_lock() a the start
of function and a lua_unlock() at the end of the function. So I
conclude that the Lua thread safe mode just perform a mutex around
all execution. So I prefer to do this in the HAProxy code, it will be
easier for distro maintainers.
Note that the HAProxy lua functions rounded by the macro SET_SAFE_LJMP
and RESET_SAFE_LJMP manipulates the Lua stack, so it will be careful
to set mutex around these functions.
A RW lock has been added to the vars structure to protect each list of
variables. And a global RW lock is used to protect registered names.
When a varibable is fetched, we duplicate sample data because the variable could
be modified by another thread.
locks have been added in pat_ref and pattern_expr structures to protect all
accesses to an instance of on of them. Moreover, a global lock has been added to
protect the LRU cache used for pattern matching.
Patterns are now duplicated after a successfull matching, to avoid modification
by other threads when the result is used.
Finally, the function reloading a pattern list has been modified to be
thread-safe.
First, OpenSSL is now initialized to be thread-safe. This is done by setting 2
callbacks. The first one is ssl_locking_function. It handles the locks and
unlocks. The second one is ssl_id_function. It returns the current thread
id. During the init step, we create as much as R/W locks as needed, ie the
number returned by CRYPTO_num_locks function.
Next, The reusable SSL session in the server context is now thread-local.
Shctx is now also initialized if HAProxy is started with several threads.
And finally, a global lock has been added to protect the LRU cache used to store
generated certificates. The function ssl_sock_get_generated_cert is now
deprecated because the retrieved certificate can be removed by another threads
in same time. Instead, a new function has been added,
ssl_sock_assign_generated_cert. It must be used to search a certificate in the
cache and set it immediatly if found.
A lock is used to protect accesses to a peer structure.
A the lock is taken in the applet handler when the peer is identified
and released living the applet handler.
In the scheduling task for peers section, the lock is taken for every
listed peer and released at the end of the process task function.
The peer 'force shutdown' function was also re-worked.
A global lock has been added to protect accesses to the list of active
applets. A process mask has also been added on each applet. Like for FDs and
tasks, it is used to know which threads are allowed to process an
applet. Because applets are, most of time, linked to a session, it should be
sticky on the same thread. But in all cases, it is the responsibility of the
applet handler to lock what have to be protected in the applet context.
The stick table API was slightly reworked:
A global spin lock on stick table was added to perform lookup and
insert in a thread safe way. The handling of refcount on entries
is now handled directly by stick tables functions under protection
of this lock and was removed from the code of callers.
The "stktable_store" function is no more externalized and users should
now use "stktable_set_entry" in any case of insertion. This last one performs
a lookup followed by a store if not found. So the code using "stktable_store"
was re-worked.
Lookup, and set_entry functions automatically increase the refcount
of the returned/stored entry.
The function "sticktable_touch" was renamed "sticktable_touch_local"
and is now able to decrease the refcount if last arg is set to true. It
is allowing to release the entry without taking the lock twice.
A new function "sticktable_touch_remote" is now used to insert
entries coming from remote peers at the right place in the update tree.
The code of peer update was re-worked to use this new function.
This function is also able to decrease the refcount if wanted.
The function "stksess_kill" also handle a parameter to decrease
the refcount on the entry.
A read/write lock is added on each entry to protect the data content
updates of the entry.
A lock for LB parameters has been added inside the proxy structure and atomic
operations have been used to update server variables releated to lb.
The only significant change is about lb_map. Because the servers status are
updated in the sync-point, we can call recalc_server_map function synchronously
in map_set_server_status_up/down function.
This list is used to save changes on the servers state. So when serveral threads
are used, it must be locked. The changes are then applied in the sync-point. To
do so, servers_update_status has be moved in the sync-point. So this is useless
to lock it at this step because the sync-point is a protected area by iteself.
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
First, we use atomic operations to update jobs/totalconn/actconn variables,
listener's nbconn variable and listener's counters. Then we add a lock on
listeners to protect access to their information. And finally, listener queues
(global and per proxy) are also protected by a lock. Here, because access to
these queues are unusal, we use the same lock for all queues instead of a global
one for the global queue and a lock per proxy for others.
2 global locks have been added to protect, respectively, the run queue and the
wait queue. And a process mask has been added on each task. Like for FDs, this
mask is used to know which threads are allowed to process a task.
For many tasks, all threads are granted. And this must be your first intension
when you create a new task, else you have a good reason to make a task sticky on
some threads. This is then the responsibility to the process callback to lock
what have to be locked in the task context.
Nevertheless, all tasks linked to a session must be sticky on the thread
creating the session. It is important that I/O handlers processing session FDs
and these tasks run on the same thread to avoid conflicts.
Many changes have been made to do so. First, the fd_updt array, where all
pending FDs for polling are stored, is now a thread-local array. Then 3 locks
have been added to protect, respectively, the fdtab array, the fd_cache array
and poll information. In addition, a lock for each entry in the fdtab array has
been added to protect all accesses to a specific FD or its information.
For pollers, according to the poller, the way to manage the concurrency is
different. There is a poller loop on each thread. So the set of monitored FDs
may need to be protected. epoll and kqueue are thread-safe per-se, so there few
things to do to protect these pollers. This is not possible with select and
poll, so there is no sharing between the threads. The poller on each thread is
independant from others.
Finally, per-thread init/deinit functions are used for each pollers and for FD
part for manage thread-local ressources.
Now, you must be carefull when a FD is created during the HAProxy startup. All
update on the FD state must be made in the threads context and never before
their creation. This is mandatory because fd_updt array is thread-local and
initialized only for threads. Because there is no pollers for the main one, this
array remains uninitialized in this context. For this reason, listeners are now
enabled in run_thread_poll_loop function, just like the worker pipe.
A sync-point is a protected area where you have the warranty that no concurrency
access is possible. It is implementated as a thread barrier to enter in the
sync-point and another one to exit from it. Inside the sync-point, all threads
that must do some syncrhonous processing will be called one after the other
while all other threads will wait. All threads will then exit from the
sync-point at the same time.
A sync-point will be evaluated only when necessary because it is a costly
operation. To limit the waiting time of each threads, we must have a mechanism
to wakeup all threads. This is done with a pipe shared by all threads. By
writting in this pipe, we will interrupt all threads blocked on a poller. The
pipe is then flushed before exiting from the sync-point.
This file contains all functions and macros used to deal with concurrency in
HAProxy. It contains all high-level function to do atomic operation
(HA_ATOMIC_*). Note, for now, we rely on "__atomic" GCC builtins to do atomic
operation. So HAProxy can be compiled with the thread support iff these builtins
are available.
It also contains wrappers around plocks to use spin or read/write locks. These
wrappers are used to abstract the internal representation of the locking system
and to add information to help debugging, when compiled with suitable
options.
To add extra info on locks, you need to add DEBUG=-DDEBUG_THREAD or
DEBUG=-DDEBUG_FULL compilation option. In addition to timing info on locks, we
keep info on where a lock was acquired the last time (function name, file and
line). There are also the thread id and a flag to know if it is still locked or
not. This will be useful to debug deadlocks.
Now memprintf relies on memvprintf. This new function does exactly what
memprintf did before, but it must be called with a va_list instead of a variable
number of arguments. So there is no change for every functions using
memprintf. But it is now also possible to have same functionnality from any
function with variadic arguments.
Allow to register a function which will be called after the
configuration file parsing, at the end of the check_config_validity().
It's useful fo checking dependencies between sections or for resolving
keywords, pointers or values.
This commit implements a post section callback. This callback will be
used at the end of a section parsing.
Every call to cfg_register_section must be modified to use the new
prototype:
int cfg_register_section(char *section_name,
int (*section_parser)(const char *, int, char **, int),
int (*post_section_parser)());
We used to have bo_{get,put}_{chr,blk,str} to retrieve/send data to
the output area of a buffer, but not the equivalent ones for the input
area. This will be needed to copy uploaded data frames in HTTP/2.
Now any call to trace() in the code will automatically appear interleaved
with the call sequence and timestamped in the trace file. They appear with
a '#' on the 3rd argument (caller's pointer) in order to make them easy to
spot. If the trace functionality is not used, a dmumy weak function is used
instead so that it doesn't require to recompile every time traces are
enabled/disabled.
The trace decoder knows how to deal with these messages, detects them and
indents them similarly to the currently traced function. This can be used
to print function arguments for example.
Note that we systematically flush the log when calling trace() to ensure we
never miss important events, so this may impact performance.
The trace() function uses the same format as printf() so it should be easy
to setup during debugging sessions.
This will be used initially by the hpack table and hopefully later by a
new native http processor. These headers are made of name and value, both
an immediate string (ie: pointer and length).
Thus function returns the number of blocks. When a buffer is full and
properly aligned, buf->p loops back the beginning, and the test in the
code doesn't cover that specific case, so it returns two chunks, a full
one and an empty one. It's harmless but can sometimes have a small impact
on performance and definitely makes the code hard to debug.
This function modifies the string to add a zero after the end, and returns
the start pointer. The purpose is to use it on strings extracted by parsers
from larger strings cut with delimiters that are not important and can be
destroyed. It allows any such string to be used with regular string
functions. It's also convenient to use with printf() to show data extracted
from writable areas.
This function returns true if the available buffer space wraps. This
will be used to detect if it's worth realigning a buffer when it lacks
contigous space.
bi_istput() injects the ist string into the input region of the buffer,
it will be used to feed small data chunks into the conn_stream. bo_istput()
does the same into the output region of the buffer, it will be used to send
data via the transport layer and assumes there's no input data.
In order to match known patterns in wrapping buffer, we'll introduce new
string manipulation functions for buffers. The new function b_isteq()
relies on an ist string for the pattern and compares it against any
location in the buffer relative to <p>. The second function bi_eat()
is specially designed to match input contents.
This simply reduces the amount of output data from the buffer after
they have been transferred, in a way that is more natural than by
fiddling with buf->o. b_del() was renamed to bi_del() to avoid any
ambiguity (it's not yet used).
Commit 36eb3a3 ("MINOR: tools: make my_htonll() more efficient on x86_64")
brought an incorrect asm statement missing the input constraints, causing
the input value not necessarily to be placed into the same register as the
output one, resulting in random output. It happens to work when building at
-O0 but not above. This was only detected in the HTTP/2 parser, but in
mainline it could only affect the integer to binary sample cast.
No backport is needed since this bug was only introduced in the development
branch.
After some tests, gcc 5.x produces better code with likely()
than without, contrary to gcc 4.x where it was better to disable
it. Let's re-enable it for 5 and above.
It's not possible to use strlen() in const arrays even with const
strings, but we can use sizeof-1 via a macro. Let's provide this in
the IST() macro, as it saves the developer from having to count the
characters.
These ones are the same as the previous ones but for 64 bit values.
We're using my_ntohll() and my_htonll() from standard.h for the byte
order conversion.
These ones are the equivalent of the read_* functions. They support
writing unaligned words, possibly wrapping, in host and network order.
The write_i*() functions were not implemented since the caller can
already use the unsigned version.
This patch adds the ability to read from a wrapping memory area (ie:
buffers). The new functions are called "readv_<type>". The original
ones were renamed to start with "read_" to make the difference more
obvious between the read method and the returned type.
It's worth noting that the memory barrier in readv_bytes() is critical,
as otherwise gcc decides that it doesn't need the resulting data, but
even worse, removes the length checks in readv_u64() and happily
performs an out-of-bounds unaligned read using read_u64()! Such
"optimizations" are a bit borderline, especially when they impact
security like this...
These ones return respectively the pointer to the end of the buffer and
the distance between b->p and the end. These will simplify a bit some
new code needed to parse directly from a wrapping buffer.
The current construct was made when developing on a 32-bit machine.
Having a simple bswap operation replaced with 2 bswap, 2 shift and
2 or is quite of a waste of precious cycles... Let's provide a trivial
asm-based implementation for x86_64.
xref is used to create a relation between two elements.
Once an element is released, it breaks the relation. If the
relation is already broken, it frees the xref struct.
The pointer between two elements is a sort of refcount with
max value 1. The relation is only between two elements.
The pointer and the type of element a and b are conventional.
Note that xref is initialised from Lua files because Lua is
the only one user.
swap_buffer is a global variable only used by buffer_slow_realign. So it has
been moved from global.h to buffer.c and it is allocated by init_buffer
function. deinit_buffer function has been added to release it. It is also used
to destroy the buffers' pool.
Now, we use init_trash_buffers and deinit_trash_buffers to, respectively,
initialize and deinitialize trash buffers (trash, trash_buf1 and trash_buf2).
These functions have been introduced to be used by threads, to deal with
thread-local trash buffers.
For HPACK we'll need to perform a lot of string manipulation between the
dynamic headers table and the output stream, and we need an efficient way
to deal with that, considering that the zero character is not an end of
string marker here. It turns out that gcc supports returning structs from
functions and is able to place up to two words directly in registers when
-freg-struct is used, which is the case by default on x86 and armv8. On
other architectures the caller reserves some stack space where the callee
can write, which is equivalent to passing a pointer to the return value.
So let's implement a few functions to deal with this as the resulting code
will be optimized on certain architectures where retrieving the length of
a string will simply consist in reading one of the two returned registers.
Extreme care was taken to ensure that the compiler gets maximum opportunities
to optimize out every bit of unused code. This is also the reason why no
call to regular string functions (such as strlen(), memcmp(), memcpy() etc)
were used. The code involving them is often larger than when they are open
coded. Given that strings are usually very small, especially when manipulating
headers, the time spent calling a function optimized for large vectors often
ends up being higher than the few cycles needed to count a few bytes.
An issue was met with __builtin_strlen() which can automatically convert
a constant string to its constant length. It doesn't accept NULLs and there
is no way to hide them using expressions as the check is made before the
optimizer is called. On gcc 4 and above, using an intermediary variable
is enough to hide it. On older versions, calls to ist() with an explicit
NULL argument will issue a warning. There is normally no reason to do this
but taking care of it the best possible still seems important.
These two functions respectively copy a memory area onto the chunk, and
append the contents of a memory area over a chunk. They are convenient
to prepare binary output data to be sent and will be used for HTTP/2.
timegm() is not provided everywhere and the documentation on how to
replace it is bogus as it proposes an inefficient and non-thread safe
alternative.
Here we reimplement everything needed to compute the number of seconds
since Epoch based on the broken down fields in struct tm. It is only
guaranteed to return correct values for correct inputs. It was successfully
tested with all possible 32-bit values of time_t converted to struct tm
using gmtime() and back to time_t using the legacy timegm() and this
function, and both functions always produced the same result.
Thanks to Benot Garnier for an instructive discussion and detailed
explanations of the various time functions, leading to this solution.
These functions was added in commit 637f8f2c ("BUG/MEDIUM: buffers: Fix how
input/output data are injected into buffers").
This patch fixes hidden bugs. When a buffer is full (buf->i + buf->o ==
buf->size), instead of returning 0, these functions can return buf->size. Today,
this never happens because callers already check if the buffer is full before
calling bi/bo_contig_space. But to avoid possible bugs if calling conditions
changed, we slightly refactored these functions.
When dumping data at various places in the code, it's hard to figure
what is present where. To make this easier, this patch slightly modifies
debug_hexdump() to take a prefix string which is prepended in front of
each output line.
The default len of request uri in log messages is 1024. In some use
cases, you need to keep the long trail of GET parameters. The only
way to increase this len is to recompile with DEFINE=-DREQURI_LEN=2048.
This commit introduces a tune.http.logurilen configuration directive,
allowing to tune this at runtime.
These encoding functions does general stuff and can be used in
other context than spoe. This patch moves the function spoe_encode_varint
and spoe_decode_varint from spoe to common. It also remove the prefix spoe.
These functions will be used for encoding values in new binary sample fetch.
This patch makes backend sections support 'server-template' new keyword.
Such 'server-template' objects are parsed similarly to a 'server' object
by parse_server() function, but its first arguments are as follows:
server-template <ID prefix> <nb | range> <ip | fqdn>:<port> ...
The remaining arguments are the same as for 'server' lines.
With such server template declarations, servers may be allocated with IDs
built from <ID prefix> and <nb | range> arguments.
For instance declaring:
server-template foo 1-5 google.com:80 ...
or
server-template foo 5 google.com:80 ...
would be equivalent to declare:
server foo1 google.com:80 ...
server foo2 google.com:80 ...
server foo3 google.com:80 ...
server foo4 google.com:80 ...
server foo5 google.com:80 ...
Released version 1.8-dev1 with the following main changes :
- BUG/MEDIUM: proxy: return "none" and "unknown" for unknown LB algos
- BUG/MINOR: stats: make field_str() return an empty string on NULL
- DOC: Spelling fixes
- BUG/MEDIUM: http: Fix tunnel mode when the CONNECT method is used
- BUG/MINOR: http: Keep the same behavior between 1.6 and 1.7 for tunneled txn
- BUG/MINOR: filters: Protect args in macros HAS_DATA_FILTERS and IS_DATA_FILTER
- BUG/MINOR: filters: Invert evaluation order of HTTP_XFER_BODY and XFER_DATA analyzers
- BUG/MINOR: http: Call XFER_DATA analyzer when HTTP txn is switched in tunnel mode
- BUG/MAJOR: stream: fix session abort on resource shortage
- OPTIM: stream-int: don't disable polling anymore on DONT_READ
- BUG/MINOR: cli: allow the backslash to be escaped on the CLI
- BUG/MEDIUM: cli: fix "show stat resolvers" and "show tls-keys"
- DOC: Fix map table's format
- DOC: Added 51Degrees conv and fetch functions to documentation.
- BUG/MINOR: http: don't send an extra CRLF after a Set-Cookie in a redirect
- DOC: mention that req_tot is for both frontends and backends
- BUG/MEDIUM: variables: some variable name can hide another ones
- MINOR: lua: Allow argument for actions
- BUILD: rearrange target files by build time
- CLEANUP: hlua: just indent functions
- MINOR: lua: give HAProxy variable access to the applets
- BUG/MINOR: stats: fix be/sessions/max output in html stats
- MINOR: proxy: Add fe_name/be_name fetchers next to existing fe_id/be_id
- DOC: lua: Documentation about some entry missing
- DOC: lua: Add documentation about variable manipulation from applet
- MINOR: Do not forward the header "Expect: 100-continue" when the option http-buffer-request is set
- DOC: Add undocumented argument of the trace filter
- DOC: Fix some typo in SPOE documentation
- MINOR: cli: Remove useless call to bi_putchk
- BUG/MINOR: cli: be sure to always warn the cli applet when input buffer is full
- MINOR: applet: Count number of (active) applets
- MINOR: task: Rename run_queue and run_queue_cur counters
- BUG/MEDIUM: stream: Save unprocessed events for a stream
- BUG/MAJOR: Fix how the list of entities waiting for a buffer is handled
- BUILD/MEDIUM: Fixing the build using LibreSSL
- BUG/MEDIUM: lua: In some case, the return of sample-fetches is ignored (2)
- SCRIPTS: git-show-backports: fix a harmless typo
- SCRIPTS: git-show-backports: add -H to use the hash of the commit message
- BUG/MINOR: stream-int: automatically release SI_FL_WAIT_DATA on SHUTW_NOW
- CLEANUP: applet/lua: create a dedicated ->fcn entry in hlua_cli context
- CLEANUP: applet/table: add an "action" entry in ->table context
- CLEANUP: applet: remove the now unused appctx->private field
- DOC: lua: documentation about time parser functions
- DOC: lua: improve links
- DOC: lua: section declared twice
- MEDIUM: cli: 'show cli sockets' list the CLI sockets
- BUG/MINOR: cli: "show cli sockets" wouldn't list all processes
- BUG/MINOR: cli: "show cli sockets" would always report process 64
- CLEANUP: lua: rename one of the lua appctx union
- BUG/MINOR: lua/cli: bad error message
- MEDIUM: lua: use memory pool for hlua struct in applets
- MINOR: lua/signals: Remove Lua part from signals.
- DOC: cli: show cli sockets
- MINOR: cli: automatically enable a CLI I/O handler when there's no parser
- CLEANUP: memory: remove the now unused cli_parse_show_pools() function
- CLEANUP: applet: group all CLI contexts together
- CLEANUP: stats: move a misplaced stats context initialization
- MINOR: cli: add two general purpose pointers and integers in the CLI struct
- MINOR: appctx/cli: remove the cli_socket entry from the appctx union
- MINOR: appctx/cli: remove the env entry from the appctx union
- MINOR: appctx/cli: remove the "be" entry from the appctx union
- MINOR: appctx/cli: remove the "dns" entry from the appctx union
- MINOR: appctx/cli: remove the "server_state" entry from the appctx union
- MINOR: appctx/cli: remove the "tlskeys" entry from the appctx union
- CONTRIB: tcploop: add limits.h to fix build issue with some compilers
- MINOR/DOC: lua: just precise one thing
- DOC: fix small typo in fe_id (backend instead of frontend)
- BUG/MINOR: Fix the sending function in Lua's cosocket
- BUG/MINOR: lua: memory leak executing tasks
- BUG/MINOR: lua: bad return code
- BUG/MINOR: lua: memleak when Lua/cli fails
- MEDIUM: lua: remove Lua struct from session, and allocate it with memory pools
- CLEANUP: haproxy: statify unexported functions
- MINOR: haproxy: add a registration for build options
- CLEANUP: wurfl: use the build options list to report it
- CLEANUP: 51d: use the build options list to report it
- CLEANUP: da: use the build options list to report it
- CLEANUP: namespaces: use the build options list to report it
- CLEANUP: tcp: use the build options list to report transparent modes
- CLEANUP: lua: use the build options list to report it
- CLEANUP: regex: use the build options list to report the regex type
- CLEANUP: ssl: use the build options list to report the SSL details
- CLEANUP: compression: use the build options list to report the algos
- CLEANUP: auth: use the build options list to report its support
- MINOR: haproxy: add a registration for post-check functions
- CLEANUP: checks: make use of the post-init registration to start checks
- CLEANUP: filters: use the function registration to initialize all proxies
- CLEANUP: wurfl: make use of the late init registration
- CLEANUP: 51d: make use of the late init registration
- CLEANUP: da: make use of the late init registration code
- MINOR: haproxy: add a registration for post-deinit functions
- CLEANUP: wurfl: register the deinit function via the dedicated list
- CLEANUP: 51d: register the deinitialization function
- CLEANUP: da: register the deinitialization function
- CLEANUP: wurfl: move global settings out of the global section
- CLEANUP: 51d: move global settings out of the global section
- CLEANUP: da: move global settings out of the global section
- MINOR: cfgparse: add two new functions to check arguments count
- MINOR: cfgparse: move parsing of "ca-base" and "crt-base" to ssl_sock
- MEDIUM: cfgparse: move all tune.ssl.* keywords to ssl_sock
- MEDIUM: cfgparse: move maxsslconn parsing to ssl_sock
- MINOR: cfgparse: move parsing of ssl-default-{bind,server}-ciphers to ssl_sock
- MEDIUM: cfgparse: move ssl-dh-param-file parsing to ssl_sock
- MEDIUM: compression: move the zlib-specific stuff from global.h to compression.c
- BUG/MEDIUM: ssl: properly reset the reused_sess during a forced handshake
- BUG/MEDIUM: ssl: avoid double free when releasing bind_confs
- BUG/MINOR: stats: fix be/sessions/current out in typed stats
- MINOR: tcp-rules: check that the listener exists before updating its counters
- MEDIUM: spoe: don't create a dummy listener for outgoing connections
- MINOR: listener: move the transport layer pointer to the bind_conf
- MEDIUM: move listener->frontend to bind_conf->frontend
- MEDIUM: ssl: remote the proxy argument from most functions
- MINOR: connection: add a new prepare_bind_conf() entry to xprt_ops
- MEDIUM: ssl_sock: implement ssl_sock_prepare_bind_conf()
- MINOR: connection: add a new destroy_bind_conf() entry to xprt_ops
- MINOR: ssl_sock: implement ssl_sock_destroy_bind_conf()
- MINOR: server: move the use_ssl field out of the ifdef USE_OPENSSL
- MINOR: connection: add a minimal transport layer registration system
- CLEANUP: connection: remove all direct references to raw_sock and ssl_sock
- CLEANUP: connection: unexport raw_sock and ssl_sock
- MINOR: connection: add new prepare_srv()/destroy_srv() entries to xprt_ops
- MINOR: ssl_sock: implement and use prepare_srv()/destroy_srv()
- CLEANUP: ssl: move tlskeys_finalize_config() to a post_check callback
- CLEANUP: ssl: move most ssl-specific global settings to ssl_sock.c
- BUG/MINOR: backend: nbsrv() should return 0 if backend is disabled
- BUG/MEDIUM: ssl: for a handshake when server-side SNI changes
- BUG/MINOR: systemd: potential zombie processes
- DOC: Add timings events schemas
- BUILD: lua: build failed on FreeBSD.
- MINOR: samples: add xx-hash functions
- MEDIUM: regex: pcre2 support
- BUG/MINOR: option prefer-last-server must be ignored in some case
- MINOR: stats: Support "select all" for backend actions
- BUG/MINOR: sample-fetches/stick-tables: bad type for the sample fetches sc*_get_gpt0
- BUG/MAJOR: channel: Fix the definition order of channel analyzers
- BUG/MINOR: http: report real parser state in error captures
- BUILD: scripts: automatically update the branch in version.h when releasing
- MINOR: tools: add a generic hexdump function for debugging
- BUG/MAJOR: http: fix risk of getting invalid reports of bad requests
- MINOR: http: custom status reason.
- MINOR: connection: add sample fetch "fc_rcvd_proxy"
- BUG/MINOR: config: emit a warning if http-reuse is enabled with incompatible options
- BUG/MINOR: tools: fix off-by-one in port size check
- BUG/MEDIUM: server: consider AF_UNSPEC as a valid address family
- MEDIUM: server: split the address and the port into two different fields
- MINOR: tools: make str2sa_range() return the port in a separate argument
- MINOR: server: take the destination port from the port field, not the addr
- MEDIUM: server: disable protocol validations when the server doesn't resolve
- BUG/MEDIUM: tools: do not force an unresolved address to AF_INET:0.0.0.0
- BUG/MINOR: ssl: EVP_PKEY must be freed after X509_get_pubkey usage
- BUG/MINOR: ssl: assert on SSL_set_shutdown with BoringSSL
- MINOR: Use "500 Internal Server Error" for 500 error/status code message.
- MINOR: proto_http.c 502 error txt typo.
- DOC: add deprecation notice to "block"
- MINOR: compression: fix -vv output without zlib/slz
- BUG/MINOR: Reset errno variable before calling strtol(3)
- MINOR: ssl: don't show prefer-server-ciphers output
- OPTIM/MINOR: config: Optimize fullconn automatic computation loading configuration
- BUG/MINOR: stream: Fix how backend-specific analyzers are set on a stream
- MAJOR: ssl: bind configuration per certificat
- MINOR: ssl: add curve suite for ECDHE negotiation
- MINOR: checks: Add agent-addr config directive
- MINOR: cli: Add possiblity to change agent config via CLI/socket
- MINOR: doc: Add docs for agent-addr configuration variable
- MINOR: doc: Add docs for agent-addr and agent-send CLI commands
- BUILD: ssl: fix to build (again) with boringssl
- BUILD: ssl: fix build on OpenSSL 1.0.0
- BUILD: ssl: silence a warning reported for ERR_remove_state()
- BUILD: ssl: eliminate warning with OpenSSL 1.1.0 regarding RAND_pseudo_bytes()
- BUILD: ssl: kill a build warning introduced by BoringSSL compatibility
- BUG/MEDIUM: tcp: don't poll for write when connect() succeeds
- BUG/MINOR: unix: fix connect's polling in case no data are scheduled
- MINOR: server: extend the flags to 32 bits
- BUG/MINOR: lua: Map.end are not reliable because "end" is a reserved keyword
- MINOR: dns: give ability to dns_init_resolvers() to close a socket when requested
- BUG/MAJOR: dns: restart sockets after fork()
- MINOR: chunks: implement a simple dynamic allocator for trash buffers
- BUG/MEDIUM: http: prevent redirect from overwriting a buffer
- BUG/MEDIUM: filters: Do not truncate HTTP response when body length is undefined
- BUG/MEDIUM: http: Prevent replace-header from overwriting a buffer
- BUG/MINOR: http: Return an error when a replace-header rule failed on the response
- BUG/MINOR: sendmail: The return of vsnprintf is not cleanly tested
- BUG/MAJOR: ssl: fix a regression in ssl_sock_shutw()
- BUG/MAJOR: lua segmentation fault when the request is like 'GET ?arg=val HTTP/1.1'
- BUG/MEDIUM: config: reject anything but "if" or "unless" after a use-backend rule
- MINOR: http: don't close when redirect location doesn't start with "/"
- MEDIUM: boringssl: support native multi-cert selection without bundling
- BUG/MEDIUM: ssl: fix verify/ca-file per certificate
- BUG/MEDIUM: ssl: switchctx should not return SSL_TLSEXT_ERR_ALERT_WARNING
- MINOR: ssl: removes SSL_CTX_set_ssl_version call and cleanup CTX creation.
- BUILD: ssl: fix build with -DOPENSSL_NO_DH
- MEDIUM: ssl: add new sample-fetch which captures the cipherlist
- MEDIUM: ssl: remove ssl-options from crt-list
- BUG/MEDIUM: ssl: in bind line, ssl-options after 'crt' are ignored.
- BUG/MINOR: ssl: fix cipherlist captures with sustainable SSL calls
- MINOR: ssl: improved cipherlist captures
- BUG/MINOR: spoe: Fix soft stop handler using a specific id for spoe filters
- BUG/MINOR: spoe: Fix parsing of arguments in spoe-message section
- MAJOR: spoe: Add support of pipelined and asynchronous exchanges with agents
- MINOR: spoe: Add support for pipelining/async capabilities in the SPOA example
- MINOR: spoe: Remove SPOE details from the appctx structure
- MINOR: spoe: Add status code in error variable instead of hardcoded value
- MINOR: spoe: Send a log message when an error occurred during event processing
- MINOR: spoe: Check the scope of sample fetches used in SPOE messages
- MEDIUM: spoe: Be sure to wakeup the good entity waiting for a buffer
- MINOR: spoe: Use the min of all known max_frame_size to encode messages
- MAJOR: spoe: Add support of payload fragmentation in NOTIFY frames
- MINOR: spoe: Add support for fragmentation capability in the SPOA example
- MAJOR: spoe: refactor the filter to clean up the code
- MINOR: spoe: Handle NOTIFY frames cancellation using ABORT bit in ACK frames
- REORG: spoe: Move struct and enum definitions in dedicated header file
- REORG: spoe: Move low-level encoding/decoding functions in dedicated header file
- MINOR: spoe: Improve implementation of the payload fragmentation
- MINOR: spoe: Add support of negation for options in SPOE configuration file
- MINOR: spoe: Add "pipelining" and "async" options in spoe-agent section
- MINOR: spoe: Rely on alertif_too_many_arg during configuration parsing
- MINOR: spoe: Add "send-frag-payload" option in spoe-agent section
- MINOR: spoe: Add "max-frame-size" statement in spoe-agent section
- DOC: spoe: Update SPOE documentation to reflect recent changes
- MINOR: config: warn when some HTTP rules are used in a TCP proxy
- BUG/MEDIUM: ssl: Clear OpenSSL error stack after trying to parse OCSP file
- BUG/MEDIUM: cli: Prevent double free in CLI ACL lookup
- BUG/MINOR: Fix "get map <map> <value>" CLI command
- MINOR: Add nbsrv sample converter
- CLEANUP: Replace repeated code to count usable servers with be_usable_srv()
- MINOR: Add hostname sample fetch
- CLEANUP: Remove comment that's no longer valid
- MEDIUM: http_error_message: txn->status / http_get_status_idx.
- MINOR: http-request tarpit deny_status.
- CLEANUP: http: make http_server_error() not set the status anymore
- MEDIUM: stats: Add JSON output option to show (info|stat)
- MEDIUM: stats: Add show json schema
- BUG/MAJOR: connection: update CO_FL_CONNECTED before calling the data layer
- MINOR: server: Add dynamic session cookies.
- MINOR: cli: Let configure the dynamic cookies from the cli.
- BUG/MINOR: checks: attempt clean shutw for SSL check
- CONTRIB: tcploop: make it build on FreeBSD
- CONTRIB: tcploop: fix time format to silence build warnings
- CONTRIB: tcploop: report action 'K' (kill) in usage message
- CONTRIB: tcploop: fix connect's address length
- CONTRIB: tcploop: use the trash instead of NULL for recv()
- BUG/MEDIUM: listener: do not try to rebind another process' socket
- BUG/MEDIUM server: Fix crash when dynamic is defined, but not key is provided.
- CLEANUP: config: Typo in comment.
- BUG/MEDIUM: filters: Fix channels synchronization in flt_end_analyze
- TESTS: add a test configuration to stress handshake combinations
- BUG/MAJOR: stream-int: do not depend on connection flags to detect connection
- BUG/MEDIUM: connection: ensure to always report the end of handshakes
- MEDIUM: connection: don't test for CO_FL_WAKE_DATA
- CLEANUP: connection: completely remove CO_FL_WAKE_DATA
- BUG: payload: fix payload not retrieving arbitrary lengths
- BUILD: ssl: simplify SSL_CTX_set_ecdh_auto compatibility
- BUILD: ssl: fix OPENSSL_NO_SSL_TRACE for boringssl and libressl
- BUG/MAJOR: http: fix typo in http_apply_redirect_rule
- MINOR: doc: 2.4. Examples should be 2.5. Examples
- BUG/MEDIUM: stream: fix client-fin/server-fin handling
- MINOR: fd: add a new flag HAP_POLL_F_RDHUP to struct poller
- BUG/MINOR: raw_sock: always perfom the last recv if RDHUP is not available
- OPTIM: poll: enable support for POLLRDHUP
- MINOR: kqueue: exclusively rely on the kqueue returned status
- MEDIUM: kqueue: take care of EV_EOF to improve polling status accuracy
- MEDIUM: kqueue: only set FD_POLL_IN when there are pending data
- DOC/MINOR: Fix typos in proxy protocol doc
- DOC: Protocol doc: add checksum, TLV type ranges
- DOC: Protocol doc: add SSL TLVs, rename CHECKSUM
- DOC: Protocol doc: add noop TLV
- MEDIUM: global: add a 'hard-stop-after' option to cap the soft-stop time
- MINOR: dns: improve DNS response parsing to use as many available records as possible
- BUG/MINOR: cfgparse: loop in tracked servers lists not detected by check_config_validity().
- MINOR: server: irrelevant error message with 'default-server' config file keyword.
- MINOR: server: Make 'default-server' support 'backup' keyword.
- MINOR: server: Make 'default-server' support 'check-send-proxy' keyword.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'non-stick' keyword.
- MINOR: server: Make 'default-server' support 'send-proxy' and 'send-proxy-v2 keywords.
- MINOR: server: Make 'default-server' support 'check-ssl' keyword.
- MINOR: server: Make 'default-server' support 'force-sslv3' and 'force-tlsv1[0-2]' keywords.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'no-ssl*' and 'no-tlsv*' keywords.
- MINOR: server: Make 'default-server' support 'ssl' keyword.
- MINOR: server: Make 'default-server' support 'send-proxy-v2-ssl*' keywords.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'verify' keyword.
- MINOR: server: Make 'default-server' support 'verifyhost' setting.
- MINOR: server: Make 'default-server' support 'check' keyword.
- MINOR: server: Make 'default-server' support 'track' setting.
- MINOR: server: Make 'default-server' support 'ca-file', 'crl-file' and 'crt' settings.
- MINOR: server: Make 'default-server' support 'redir' keyword.
- MINOR: server: Make 'default-server' support 'observe' keyword.
- MINOR: server: Make 'default-server' support 'cookie' keyword.
- MINOR: server: Make 'default-server' support 'ciphers' keyword.
- MINOR: server: Make 'default-server' support 'tcp-ut' keyword.
- MINOR: server: Make 'default-server' support 'namespace' keyword.
- MINOR: server: Make 'default-server' support 'source' keyword.
- MINOR: server: Make 'default-server' support 'sni' keyword.
- MINOR: server: Make 'default-server' support 'addr' keyword.
- MINOR: server: Make 'default-server' support 'disabled' keyword.
- MINOR: server: Add 'no-agent-check' server keyword.
- DOC: server: Add docs for "server" and "default-server" new "no-*" and other settings.
- MINOR: doc: fix use-server example (imap vs mail)
- BUG/MEDIUM: tcp: don't require privileges to bind to device
- BUILD: make the release script use shortlog for the final changelog
- BUILD: scripts: fix typo in announce-release error message
- CLEANUP: time: curr_sec_ms doesn't need to be exported
- BUG/MEDIUM: server: Wrong server default CRT filenames initialization.
- BUG/MEDIUM: peers: fix buffer overflow control in intdecode.
- BUG/MEDIUM: buffers: Fix how input/output data are injected into buffers
- BUG/MINOR: http: Fix conditions to clean up a txn and to handle the next request
- CLEANUP: http: Remove channel_congested function
- CLEANUP: buffers: Remove buffer_bounce_realign function
- CLEANUP: buffers: Remove buffer_contig_area and buffer_work_area functions
- MINOR: http: remove useless check on HTTP_MSGF_XFER_LEN for the request
- MINOR: http: Add debug messages when HTTP body analyzers are called
- BUG/MEDIUM: http: Fix blocked HTTP/1.0 responses when compression is enabled
- BUG/MINOR: filters: Don't force the stream's wakeup when we wait in flt_end_analyze
- DOC: fix parenthesis and add missing "Example" tags
- DOC: update the contributing file
- DOC: log-format/tcplog/httplog update
- MINOR: config parsing: add warning when log-format/tcplog/httplog is overriden in "defaults" sections
The function buffer_contig_space is buggy and could lead to pernicious bugs
(never hitted until now, AFAIK). This function should return the number of bytes
that can be written into the buffer at once (without wrapping).
First, this function is used to inject input data (bi_putblk) and to inject
output data (bo_putblk and bo_inject). But there is no context. So it cannot
decide where contiguous space should placed. For input data, it should be after
bi_end(buf) (ie, buf->p + buf->i modulo wrapping calculation). For output data,
it should be after bo_end(buf) (ie, buf->p) and input data are assumed to not
exist (else there is no space at all).
Then, considering we need to inject input data, this function does not always
returns the right value. And when we need to inject output data, we must be sure
to have no input data at all (buf->i == 0), else the result can also be wrong
(but this is the caller responsibility, so everything should be fine here).
The buffer can be in 3 different states:
1) no wrapping
<---- o ----><----- i ----->
+------------+------------+-------------+------------+
| |oooooooooooo|iiiiiiiiiiiii|xxxxxxxxxxxx|
+------------+------------+-------------+------------+
^ <contig_space>
p ^ ^
l r
2) input wrapping
...---> <---- o ----><-------- i -------...
+-----+------------+------------+--------------------+
|iiiii|xxxxxxxxxxxx|oooooooooooo|iiiiiiiiiiiiiiiiiiii|
+-----+------------+------------+--------------------+
<contig_space> ^
^ ^ p
l r
3) output wrapping
...------ o ------><----- i -----> <----...
+------------------+-------------+------------+------+
|oooooooooooooooooo|iiiiiiiiiiiii|xxxxxxxxxxxx|oooooo|
+------------------+-------------+------------+------+
^ <contig_space>
p ^ ^
l r
buffer_contig_space returns (l - r). The cases 1 and 3 are correctly
handled. But for the second case, r is wrong. It points on the buffer's end
(buf->data + buf->size). It should be bo_end(buf) (ie, buf->p - buf->o).
To fix the bug, the function has been splitted. Now, bi_contig_space and
bo_contig_space should be used to know the contiguous space available to insert,
respectively, input data and output data. For bo_contig_space, input data are
assumed to not exist. And the right version is used, depending what we want to
do.
In addition, to clarify the buffer's API, buffer_realign does not return value
anymore. So it has the same API than buffer_slow_realign.
This patch can be backported in 1.7, 1.6 and 1.5.
The trash buffers are becoming increasingly complex to deal with due to
the code's modularity allowing some functions to be chained and causing
the same chunk buffers to be used multiple times along the chain, possibly
corrupting each other. In fact the trash were designed from scratch for
explicitly not surviving a function call but string manipulation makes
this impossible most of the time while not fullfilling the need for
reliable temporary chunks.
Here we introduce the ability to allocate a temporary trash chunk which
is reserved, so that it will not conflict with the trash chunks other
functions use, and will even support reentrant calls (eg: build_logline).
For this, we create a new pool which is exactly the size of a usual chunk
buffer plus the size of the chunk struct so that these chunks when allocated
are exactly the same size as the ones returned by get_trash_buffer(). These
chunks may fail so the caller must check them, and the caller is also
responsible for freeing them.
The code focuses on minimal changes and ease of reliable backporting
because it will be needed in stable versions in order to support next
patch.
crt-list is extend to support ssl configuration. You can now have
such line in crt-list <file>:
mycert.pem [npn h2,http/1.1]
Support include "npn", "alpn", "verify", "ca_file", "crl_file",
"ecdhe", "ciphers" configuration and ssl options.
"crt-base" is also supported to fetch certificates.
debug_hexdump() prints to the requested output stream (typically stdout
or stderr) an hex dump of the blob passed in argument. This is useful
to help debug binary protocols.
this adds a support of the newest pcre2 library,
more secure than its older sibling in a cost of a
more complex API.
It works pretty similarly to pcre's part to keep
the overall change smooth, except :
- we define the string class supported at compile time.
- after matching the ovec data is properly sized, althought
we do not take advantage of it here.
- the lack of jit support is treated less 'dramatically'
as pcre2_jit_compile in this case is 'no-op'.
We already had alertif_too_many_args{,_idx}(), but these ones are
specifically designed for use in cfgparse. Outside of it we're
trying to avoid calling Alert() all the time so we need an
equivalent using a pointer to an error message.
These new functions called too_many_args{,_idx)() do exactly this.
They don't take the file name nor the line number which they have
no use for but instead they take an optional pointer to an error
message and the pointer to the error code is optional as well.
With (NULL, NULL) they'll simply check the validity and return a
verdict. They are quite convenient for use in isolated keyword
parsers.
These two new functions as well as the previous ones have all been
exported.
When an entity tries to get a buffer, if it cannot be allocted, for example
because the number of buffers which may be allocated per process is limited,
this entity is added in a list (called <buffer_wq>) and wait for an available
buffer.
Historically, the <buffer_wq> list was logically attached to streams because it
were the only entities likely to be added in it. Now, applets can also be
waiting for a free buffer. And with filters, we could imagine to have more other
entities waiting for a buffer. So it make sense to have a generic list.
Anyway, with the current design there is a bug. When an applet failed to get a
buffer, it will wait. But we add the stream attached to the applet in
<buffer_wq>, instead of the applet itself. So when a buffer is available, we
wake up the stream and not the waiting applet. So, it is possible to have
waiting applets and never awakened.
So, now, <buffer_wq> is independant from streams. And we really add the waiting
entity in <buffer_wq>. To be generic, the entity is responsible to define the
callback used to awaken it.
In addition, applets will still request an input buffer when they become
active. But they will not be sleeped anymore if no buffer are available. So this
is the responsibility to the applet I/O handler to check if this buffer is
allocated or not. This way, an applet can decide if this buffer is required or
not and can do additional processing if not.
[wt: backport to 1.7 and 1.6]
A scope is a section name between square bracket, alone on its line, ie:
[scope-name]
...
The spaces at the beginning and at the end of the line are skipped. Comments at
the end of the line are also skipped.
When a scope is parsed, its name is saved in the global variable
cfg_scope. Initially, cfg_scope is NULL and it remains NULL until a valid scope
line is parsed.
This feature remains unused in the HAProxy configuration file and
undocumented. However, it will be used during SPOE configuration parsing.
This feature will be used by the stream processing offload engine (SPOE) to
parse dedicated configuration files without mixing HAProxy sections with SPOE
sections.
So, here we can back up all sections known by HAProxy, unregister all of them
and add new ones, dedicted to the SPOE. Once the SPOE configuration file parsed,
we can roll back all changes by restoring HAProxy sections.
This commit introduces "tcp-request session" rules. These are very
much like "tcp-request connection" rules except that they're processed
after the handshake, so it is possible to consider SSL information and
addresses rewritten by the proxy protocol header in actions. This is
particularly useful to track proxied sources as this was not possible
before, given that tcp-request content rules are processed after each
HTTP request. Similarly it is possible to assign the proxied source
address or the client's cert to a variable.
The function ipcpy() simply duplicates the IP address found in one
struct sockaddr_storage into an other struct sockaddr_storage.
It also update the family on the destination structure.
Memory of destination structure must be allocated and cleared by the
caller.
FreeBSD prefers to use IPPROTO_TCP over SOL_TCP, just like it does
with their *_IP counterparts. It's worth noting that there are a few
inconsistencies between SOL_TCP and IPPROTO_TCP in the code, eg on
TCP_QUICKACK. The two values are the same but it's worth applying
what implementations recommend.
No backport is needed, this was uncovered by the recent tcp_info stuff.
It is sometimes needed in application server environments to easily tell
if a source is local to the machine or a remote one, without necessarily
knowing all the local addresses (dhcp, vrrp, etc). Similarly in transparent
proxy configurations it is sometimes desired to tell the difference between
local and remote destination addresses.
This patch adds two new sample fetch functions for this :
dst_is_local : boolean
Returns true if the destination address of the incoming connection is local
to the system, or false if the address doesn't exist on the system, meaning
that it was intercepted in transparent mode. It can be useful to apply
certain rules by default to forwarded traffic and other rules to the traffic
targetting the real address of the machine. For example the stats page could
be delivered only on this address, or SSH access could be locally redirected.
Please note that the check involves a few system calls, so it's better to do
it only once per connection.
src_is_local : boolean
Returns true if the source address of the incoming connection is local to the
system, or false if the address doesn't exist on the system, meaning that it
comes from a remote machine. Note that UNIX addresses are considered local.
It can be useful to apply certain access restrictions based on where the
client comes from (eg: require auth or https for remote machines). Please
note that the check involves a few system calls, so it's better to do it only
once per connection.
Similar to "escape_chunk", this function tries to prefix all characters
tagged in the <map> with the <escape> character. The specified <string>
contains the input to be escaped.
Alexander Lebedev reported that the DNS parser crashes in 1.6 with a bus
error on Sparc when it receives a response. This is obviously caused by
some alignment issues. The issue can also be reproduced on ARMv5 when
setting /proc/cpu/alignment to 4 (which helps debugging).
Two places cause this crash in turn, the first one is when the IP address
from the packet is compared to the current one, and the second place is
when the address is assigned because an unaligned address is passed to
update_server_addr().
This patch modifies these places to properly use memcpy() and memcmp()
to manipulate the unaligned data.
Nenad Merdanovic found another set of places specific to 1.7 in functions
in_net_ipv4() and in_net_ipv6(), which are used to compare networks. 1.6
has the functions but does not use them. There we perform a temporary copy
to a local variable to fix the problem. The type of the function's argument
is wrong since it's not necessarily aligned, so we change it for a const
void * instead.
This fix must be backported to 1.6. Note that in 1.6 the code is slightly
different, there's no rec[] array, the pointer is used directly from the
buffer.
When realloc fails to allocate memory, the original pointer is not
freed. Sometime people override the original pointer with the pointer
returned by realloc which is NULL in case of failure. This results
in a memory leak because the memory pointed by the original pointer
cannot be freed.
htonll()/ntohll() already exist on Solaris 11 with a different declaration,
causing a build error as reported by Jonathan Fisher. They used to exist on
OSX with a #define which allowed us to detect them. It was a bad idea to give
these functions a name subject to conflicts like this. Simply rename them
my_htonll()/my_ntohll() to definitely get rid of the conflict.
This patch must be backported to 1.6.
int list_append_word(struct list *li, const char *str, char **err)
Append a copy of string <str> (inside a wordlist) at the end of
the list <li>.
The caller is responsible for freeing the <err> and <str> copy memory
area using free().
On failure : return 0 and <err> filled with an error message.
Avoiding harmful memcpy call if the allocation failed.
Resetting the size which avoids further harmful freeing
invalid pointer. Closer to the comment behavior description.
The strftime() function can call tzset() internally on some platforms.
When haproxy is chrooted, the /etc/localtime file is not found, and some
implementations will clobber the content of the current timezone.
The GMT offset is computed by diffing the times returned by gmtime_r() and
localtime_r(). These variants are guaranteed to not call tzset() and were
already used in haproxy while chrooted, so they should be safe.
This patch must be backported to 1.6 and 1.5.
GMT offset used in local time formats was computed at startup, but was not updated when DST status changed while running.
For example these two RFC5424 syslog traces where emitted 5 seconds apart, just before and after DST changed:
<14>1 2016-03-27T01:59:58+01:00 bunch-VirtualBox haproxy 2098 - - Connect ...
<14>1 2016-03-27T03:00:03+01:00 bunch-VirtualBox haproxy 2098 - - Connect ...
It looked like they were emitted more than 1 hour apart, unlike with the fix:
<14>1 2016-03-27T01:59:58+01:00 bunch-VirtualBox haproxy 3381 - - Connect ...
<14>1 2016-03-27T03:00:03+02:00 bunch-VirtualBox haproxy 3381 - - Connect ...
This patch should be backported to 1.6 and partially to 1.5 (no fix needed in log.c).
It's easier to have a new flag in <flags> to indicate whether or not we
want to display the admin column in HTML dumps. We already have similar
flags to show the version or the legends.
The recent addition of "show env" on the CLI has revealed an interesting
design bug. Chunks are supposed to support a negative length to indicate
that they carry no data. chunk_printf() sets this size to -1 if the string
is too large for the buffer. At a few places in the http engine we may end
up with trash.len = -1. But bi_putchk(), chunk_appendf() and a few other
chunks consumers don't consider this case as possible and will use such a
chunk, possibly restoring an invalid string or trying to copy -1 bytes.
This fix takes care of clarifying the situation in a backportable way
where such sizes are used, so that a negative length indicating an error
remains present until the chunk is reinitialized or overwritten. But a
cleaner design adjustment needs to be done so that there's a clear contract
on how to use these chunks. At first glance it doesn't seem *that* useful
to support negative sizes, so probably this is what should change.
This fix must be backported to 1.6 and 1.5.
This allows the tcp connection to send multiple SYN packets, so 1 lost
packet does not cause the mail to be lost. It changes the socket timeout
from 2 to 10 seconds, this allows for 3 syn packets to be send and
waiting a little for their reply.
This patch should be backported to 1.6.
Acked-by: Simon Horman <horms@verge.net.au>
This parser takes a string containing an HTTP date. It returns
a broken-down time struct. We must considers considers this
time as GMT. Maybe later the timezone will be taken in account.
Usually it's desirable to merge similarly sized pools, which is the
reason why their size is rounded up to the next multiple of 16. But
for the buffers this is problematic because we add the size of
struct buffer to the user-requested size, and the rounding results
in 8 extra bytes that are usable in the end. So the user gets more
bytes than asked for, and in case of SSL it results in short writes
for the extra bytes that are sent above multiples of 16 kB.
So we add a new flag MEM_F_EXACT to request that the size is not
rounded up when creating the entry. Thus it doesn't disable merging.
We have csv_enc() but there's no way to append some CSV-encoded data
to an existing chunk, so here we modify the existing function for this
and create an inlined version of csv_enc() which first resets the output
chunk. It will be handy to append data to an existing chunk without
having to use an extra temporary chunk, or to encode multiple strings
into a single chunk with chunk_newstr().
The patch is quite small, in fact most changes are typo fixes in the
comments.
chunk_initstr() prepares a read-only chunk from a string of
fixed length. Thus it must be prepared to accept a read-only
string on the input, otherwise the caller has to force-cast
some const char* and that's not a good idea.
These two new functions will make it easier to manipulate small strings
from within functions, because at many places, multiple short strings
are needed which do not deserve a malloc() nor a free(), and alloca()
is often discouraged. Since we already have trash chunks, it's convenient
to be able to allocate substrings from a chunk and use them later since
our functions already perform all the length checks. chunk_newstr() adds
a trailing zero at the end of a chunk and returns the pointer to the next
character, which can be used as an independant string. chunk_strcat()
does what it says.
Since thus function bears the name of a well-known string function, it
must at least promise compatible semantics. Here it means always adding
the trailing zero so that anyone willing to use chunk->str as a regular
string can do it. Of course the zero is not counted in the chunk's length.
chunk_dup() was affected by two bugs at once related to dst->size :
- first, it didn't check dst->size to know if it could free(dst->str),
so using it on a statically allocated chunk would cause a free(constant)
and crash the process ;
- second, it didn't properly set dst->size, possibly causing smaller
strings not to be properly reported in a chunk that was previously
used for something else.
Fortunately, neither of these situations ever happened since the function
is rarely used.
In the process of doing this, we even allocate one more byte for a
trailing zero if the input chunk was not full, so that the copied
string can safely be reused by standard string functions.
The bug was introduced in 1.3.4 nine years ago with this commit :
0f77253 ("[MINOR] store HTTP error messages into a chunk array")
It's better to backport this fix in case a future fix relies on it.
On freebsd, the macro LIST_PREV already exists in the header file
<sys/queue.h>, and this makes a build error.
This patch removes the macros before declaring it. This ensure
that the error doesn't occurs.
When DEBUG_MEMORY_POOLS is used, we now use the link pointer at the end
of the pool to store a pointer to the pool, and to control it during
pool_free2() in order to serve four purposes :
- at any instant we can know what pool an object was allocated from
when examining memory, hence how we should possibly decode it ;
- it serves to detect double free when they happen, as the pointer
cannot be valid after the element is linked into the pool ;
- it serves to detect if an element is released in the wrong pool ;
- it serves as a canary, to detect if some buffers experienced an
overflow before being release.
All these elements will definitely help better troubleshoot strange
situations, or at least confirm that certain conditions did not happen.
When debugging a core file, it's sometimes convenient to be able to
visit the released entries in the pools (typically last released
session). Unfortunately the first bytes of these entries are destroyed
by the link elements of the pool. And of course, most structures have
their most accessed elements at the beginning of the structure (typically
flags). Let's add a build-time option DEBUG_MEMORY_POOLS which allocates
an extra pointer in each pool to put the link at the end of each pool
item instead of the beginning.
Sometimes analysing a core file isn't easy due to shared memory pools.
Let's add a build option to disable this. It's not enabled by default,
it could be backported to older versions.
I would like to contribute the following fix to enable the Linux s390x
platform. The fix was built against today's git master. I've attached the
patch for review. Depending on your buildbot/jenkins/? requirements I can
set up a virtual machine for automated building/testing of the package in
this environment.
htonll and ntohll were defined in 5b4dd683cb but on osx they are already
defined in sys/_endian.h. So, we check if they are defined before
declaring them.
[wt: no backport needed]
When debugging an issue, sometimes it can be useful to be able to use
byte 0 to poison memory areas, resulting in the same effect as a calloc().
This patch changes the default mem_poison_byte to -1 to disable it so that
all positive values are usable.
A new function introduced meant to be called during general deinit phase.
During the configuration parsing, the section entries are all allocated.
This new function free them.
The tune.maxrewrite parameter used to be pre-initialized to half of
the buffer size since the very early days when buffers were very small.
It has grown to absurdly large values over the years to reach 8kB for a
16kB buffer. This prevents large requests from being accepted, which is
the opposite of the initial goal.
Many users fix it to 1024 which is already quite large for header
addition.
So let's change the default setting policy :
- pre-initialize it to 1024
- let the user tweak it
- in any case, limit it to tune.bufsize / 2
This results in 15kB usable to buffer HTTP messages instead of 8kB, and
doesn't affect existing configurations which already force it.
The function does a bunch of things among which resolving environment
variables, skipping address family specifiers and trimming port ranges.
It is the only one which sees the complete host name before trying to
resolve it. The DNS resolving code needs to know the original hostname,
so we modify this function to optionally provide it to the caller.
Note that the function itself doesn't know if the host part was a host
or an address, but str2ip() knows that and can be asked not to try to
resolve. So we first try to parse the address without resolving and
try again with resolving enabled. This way we know if the address is
explicit or needs some kind of resolution.
These are the 64-bit equivalent of htonl() and ntohl(). They're a bit
tricky in order to avoid expensive operations.
The principle consists in letting the compiler detect we're playing
with a union and simplify most or all operations. The asm-optimized
htonl() version involving bswap (x86) / rev (arm) / other is a single
operation on little endian, or a NOP on big-endian. In both cases,
this lets the compiler "see" that we're rebuilding a 64-bit word from
two 32-bit quantities that fit into a 32-bit register. In big endian,
the whole code is optimized out. In little endian, with a decent compiler,
a few bswap and 2 shifts are left, which is the minimum acceptable.
This patch adds 3 functions for 64 bit integer conversion.
* lltoa_r : converts signed 64 bit integer to string
* read_uint64 : converts from string to signed 64 bits integer with capping
* read_int64 : converts from string to unsigned 64 bits integer with capping
This is in order to avoid conflicting with NetBSD popcount* functions
since 6.x release, the final l to mentions the argument is a long like
NetBSD does.
This patch could be backported to 1.5 to fix the build issue there as well.
Since commit 65d805fd witch removes standard.h from compat.h some
values were not properly set on FreeBSD. This caused a segfault
at startup when smp_resolve_args is called.
As FreeBSD have IP_BINDANY, CONFIG_HAP_TRANSPARENT is define. This
cause struct conn_src to be extended with some fields. The size of
this structure was incorrect. Including netinet/in.h fix this issue.
While diving in code preprocessing, I found that limits.h was require
to properly set MAX_HOSTNAME_LEN, ULONG_MAX, USHRT_MAX and others
system limits on FreeBSD.
With this patch, it is possible to configure HAProxy to forge the SSL
certificate sent to a client using the SNI servername. We do it in the SNI
callback.
To enable this feature, you must pass following BIND options:
* ca-sign-file <FILE> : This is the PEM file containing the CA certitifacte and
the CA private key to create and sign server's certificates.
* (optionally) ca-sign-pass <PASS>: This is the CA private key passphrase, if
any.
* generate-certificates: Enable the dynamic generation of certificates for a
listener.
Because generating certificates is expensive, there is a LRU cache to store
them. Its size can be customized by setting the global parameter
'tune.ssl.ssl-ctx-cache-size'.
This function checks a string for using it in a CSV output format. If
the string contains one of the following four char <">, <,>, CR or LF,
the string is encapsulated between <"> and the <"> are escaped by a <"">
sequence.
The rounding by <"> is optionnal. It can be canceled, forced or the
function choose automatically the right way.
These ones were already obsoleted in 1.4, marked for removal in 1.5,
and not documented anymore. They used to emit warnings, and do still
require quite some code to stay in place. Let's remove them now.
The principle of this cache is to have a global cache for all pattern
matching operations which rely on lists (reg, sub, dir, dom, ...). The
input data, the expression and a random seed are used as a hashing key.
The cached entries contains a pointer to the expression and a revision
number for that expression so that we don't accidently used obsolete
data after a pattern update or a very unlikely hash collision.
Regarding the risk of collisions, 10k entries at 10k req/s mean 1% risk
of a collision after 60 years, that's already much less than the memory's
reliability in most machines and more durable than most admin's life
expectancy. A collision will result in a valid result to be returned
for a different entry from the same list. If this is not acceptable,
the cache can be disabled using tune.pattern.cache-size.
A test on a file containing 10k small regex showed that the regex
matching was limited to 6k/s instead of 70k with regular strings.
When enabling the LRU cache, the performance was back to 70k/s.
This one returns a timestamp, either the one from the CPU or from
gettimeofday() in 64-bit format. The purpose is to be able to compare
timestamps on various entities to make it easier to detect updates.
It can also be used for benchmarking in certain situations during
development.
The include file did not protect correctly against multiple inclusions,
as it didn't define the file name after checking for it. That's currently
harmless as the file is only included from .c but that could change.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
The function buffer_contig_space() returns the contiguous space avalaible
to add data (at the end of the input side) while the function
hlua_channel_send_yield() needs to insert data starting at p. Here we
introduce a new function bi_space_for_replace() which returns the amount
of space that can be inserted at the head of the input side with one of
the buffer_replace* functions.
This patch proposes a function that returns the space avalaible after buf->p.
Until now, the TLS ticket keys couldn't have been configured and
shared between multiple instances or multiple servers running HAproxy.
The result was that if a request got a TLS ticket from one instance/server
and it hits another one afterwards, it will have to go through the full
SSL handshake and negotation.
This patch enables adding a ticket file to the bind line, which will be
used for all SSL contexts created from that bind line. We can use the
same file on all instances or servers to mitigate this issue and have
consistent TLS tickets assigned. Clients will no longer have to negotiate
every time they change the handling process.
Signed-off-by: Nenad Merdanovic <nmerdan@anine.io>
This function (and its sister regex_exec_match2()) abstract the regex
execution but make it impossible to pass flags to the regex engine.
Currently we don't use them but we'll need to support REG_NOTBOL soon
(to indicate that we're not at the beginning of a line). So let's add
support for this flag and update the API accordingly.
This function will be used to perform CRC32 computations. This one wa
loosely inspired from crc32b found here, and focuses on size and speed
at the same time :
http://www.hackersdelight.org/hdcodetxt/crc.c.txt
Much faster table-based versions exist but are pointless for our usage
here, this hash already sustains gigabit speed which is far faster than
what we'd ever need. Better preserve the CPU's cache instead.
If a memory size limit is enforced using "-n" on the command line and
one or both of maxconn / maxsslconn are not set, instead of using the
build-time values, haproxy now computes the number of sessions that can
be allocated depending on a number of parameters among which :
- global.maxconn (if set)
- global.maxsslconn (if set)
- maxzlibmem
- tune.ssl.cachesize
- presence of SSL in at least one frontend (bind lines)
- presence of SSL in at least one backend (server lines)
- tune.bufsize
- tune.cookie_len
The purpose is to ensure that not haproxy will not run out of memory
when maxing out all parameters. If neither maxconn nor maxsslconn are
used, it will consider that 100% of the sessions involve SSL on sides
where it's supported. That means that it will typically optimize maxconn
for SSL offloading or SSL bridging on all connections. This generally
means that the simple act of enabling SSL in a frontend or in a backend
will significantly reduce the global maxconn but in exchange of that, it
will guarantee that it will not fail.
All metrics may be enforced using #defines to accomodate variations in
SSL libraries or various allocation sizes.
An SSL connection takes some memory when it exists and during handshakes.
We measured up to 16kB for an established endpoint, and up to 76 extra kB
during a handshake. The SSL layer stores these values into the global
struct during initialization. If other SSL libs are used, it's easy to
change these values. Anyway they'll only be used as gross estimates in
order to guess the max number of SSL conns that can be established when
memory is constrained and the limit is not set.
This function's name was poorly chosen and is confusing to the point of
being suspiciously used at some places. The operations it does always
consider the ability to forward pending input data before receiving new
data. This is not obvious at all, especially at some places where it was
used when consuming outgoing data to know if the buffer has any chance
to ever get the missing data. The code needs to be re-audited with that
in mind. Care must be taken with existing code since the polarity of the
function was switched with the renaming.
Some users reported that the default max hostname length of 32 is too
short in some environments. This patch does two things :
- it relies on the system's max hostname length as found in MAXHOSTNAMELEN
if it is set. This is the most logical thing to do as the system libs
generally present the appropriate value supported by the system. This
value is 64 on Linux and 256 on Solaris, to give a few examples.
- otherwise it defaults to 64
It is still possible to override this value by defining MAX_HOSTNAME_LEN at
build time. After some observation time, this patch may be backported to
1.5 if it does not cause any build issue, as it is harmless and may help
some users.
We've already experimented with three wake up algorithms when releasing
buffers : the first naive one used to wake up far too many sessions,
causing many of them not to get any buffer. The second approach which
was still in use prior to this patch consisted in waking up either 1
or 2 sessions depending on the number of FDs we had released. And this
was still inaccurate. The third one tried to cover the accuracy issues
of the second and took into consideration the number of FDs the sessions
would be willing to use, but most of the time we ended up waking up too
many of them for nothing, or deadlocking by lack of buffers.
This patch completely removes the need to allocate two buffers at once.
Instead it splits allocations into critical and non-critical ones and
implements a reserve in the pool for this. The deadlock situation happens
when all buffers are be allocated for requests pending in a maxconn-limited
server queue, because then there's no more way to allocate buffers for
responses, and these responses are critical to release the servers's
connection in order to release the pending requests. In fact maxconn on
a server creates a dependence between sessions and particularly between
oldest session's responses and latest session's requests. Thus, it is
mandatory to get a free buffer for a response in order to release a
server connection which will permit to release a request buffer.
Since we definitely have non-symmetrical buffers, we need to implement
this logic in the buffer allocation mechanism. What this commit does is
implement a reserve of buffers which can only be allocated for responses
and that will never be allocated for requests. This is made possible by
the requester indicating how much margin it wants to leave after the
allocation succeeds. Thus it is a cooperative allocation mechanism : the
requester (process_session() in general) prefers not to get a buffer in
order to respect other's need for response buffers. The session management
code always knows if a buffer will be used for requests or responses, so
that is not difficult :
- either there's an applet on the initiator side and we really need
the request buffer (since currently the applet is called in the
context of the session)
- or we have a connection and we really need the response buffer (in
order to support building and sending an error message back)
This reserve ensures that we don't take all allocatable buffers for
requests waiting in a queue. The downside is that all the extra buffers
are really allocated to ensure they can be allocated. But with small
values it is not an issue.
With this change, we don't observe any more deadlocks even when running
with maxconn 1 on a server under severely constrained memory conditions.
The code becomes a bit tricky, it relies on the scheduler's run queue to
estimate how many sessions are already expected to run so that it doesn't
wake up everyone with too few resources. A better solution would probably
consist in having two queues, one for urgent requests and one for normal
requests. A failed allocation for a session dealing with an error, a
connection event, or the need for a response (or request when there's an
applet on the left) would go to the urgent request queue, while other
requests would go to the other queue. Urgent requests would be served
from 1 entry in the pool, while the regular ones would be served only
according to the reserve. Despite not yet having this, it works
remarkably well.
This mechanism is quite efficient, we don't perform too many wake up calls
anymore. For 1 million sessions elapsed during massive memory contention,
we observe about 4.5M calls to process_session() compared to 4.0M without
memory constraints. Previously we used to observe up to 16M calls, which
rougly means 12M failures.
During a test run under high memory constraints (limit enforced to 27 MB
instead of the 58 MB normally needed), performance used to drop by 53% prior
to this patch. Now with this patch instead it *increases* by about 1.5%.
The best effect of this change is that by limiting the memory usage to about
2/3 to 3/4 of what is needed by default, it's possible to increase performance
by up to about 18% mainly due to the fact that pools are reused more often
and remain hot in the CPU cache (observed on regular HTTP traffic with 20k
objects, buffers.limit = maxconn/10, buffers.reserve = limit/2).
Below is an example of scenario which used to cause a deadlock previously :
- connection is received
- two buffers are allocated in process_session() then released
- one is allocated when receiving an HTTP request
- the second buffer is allocated then released in process_session()
for request parsing then connection establishment.
- poll() says we can send, so the request buffer is sent and released
- process session gets notified that the connection is now established
and allocates two buffers then releases them
- all other sessions do the same till one cannot get the request buffer
without hitting the margin
- and now the server responds. stream_interface allocates the response
buffer and manages to get it since it's higher priority being for a
response.
- but process_session() cannot allocate the request buffer anymore
=> We could end up with all buffers used by responses so that none may
be allocated for a request in process_session().
When the applet processing leaves the session context, the test will have
to be changed so that we always allocate a response buffer regardless of
the left side (eg: H2->H1 gateway). A final improvement would consists in
being able to only retry the failed I/O operation without waking up a
task, but to date all experiments to achieve this have proven not to be
reliable enough.
This function is used to allocate a buffer and ensure that we leave
some margin after it in the pool. The function is not obvious. While
we allocate only one buffer, we want to ensure that at least two remain
available after our allocation. The purpose is to ensure we'll never
enter a deadlock where all sessions allocate exactly one buffer, and
none of them will be able to allocate the second buffer needed to build
a response in order to release the first one.
We also take care of remaining fast in the the fast path by first
checking whether or not there is enough margin, in which case we only
rely on b_alloc_fast() which is guaranteed to succeed. Otherwise we
take the slow path using pool_refill_alloc().
This function allocates a buffer and replaces *buf with this buffer. If
no memory is available, &buf_wanted is used instead. No control is made
to check if *buf already pointed to another buffer. The allocated buffer
is returned, or NULL in case no memory is available. The difference with
b_alloc() is that this function only picks from the pool and never calls
malloc(), so it can fail even if some memory is available. It is the
caller's job to refill the buffer pool if needed.
Till now we'd consider a buffer full even if it had size==0 due to pointing
to buf.size. Now we change this : if buf_wanted is present, it means that we
have already tried to allocate a buffer but failed. Thus the buffer must be
considered full so that we stop trying to poll for reads on it. Otherwise if
it's empty, it's buf_empty and we report !full since we may allocate it on
the fly.
Doing so ensures that even when no memory is available, we leave the
channel in a sane condition. There's a special case in proto_http.c
regarding the compression, we simply pre-allocate the tmpbuf to point
to the dummy buffer. Not reusing &buf_empty for this allows the rest
of the code to differenciate an empty buffer that's not used from an
empty buffer that results from a failed allocation which has the same
semantics as a buffer full.
Channels are now created with a valid pointer to a buffer before the
buffer is allocated. This buffer is a global one called "buf_empty" and
of size zero. Thus it prevents any activity from being performed on
the buffer and still ensures that chn->buf may always be dereferenced.
b_free() also resets the buffer to &buf_empty, and was split into
b_drop() which does not reset the buffer.
We don't call pool_free2(pool2_buffers) anymore, we only call b_free()
to do the job. This ensures that we can start to centralize the releasing
of buffers.
b_alloc() now allocates a buffer and initializes it to the size specified
in the pool minus the size of the struct buffer itself. This ensures that
callers do not need to care about buffer details anymore. Also this never
applies memory poisonning, which is slow and useless on buffers.
We'll soon need to be able to switch buffers without touching the
channel, so let's move buffer initialization out of channel_init().
We had the same in compressoin.c.
Till now this function would only allocate one entry at a time. But with
dynamic buffers we'll like to allocate the number of missing entries to
properly refill the pool.
Let's modify it to take a minimum amount of available entries. This means
that when we know we need at least a number of available entries, we can
ask to allocate all of them at once. It also ensures that we don't move
the pointers back and forth between the caller and the pool, and that we
don't call pool_gc2() for each failed malloc. Instead, it's called only
once and the malloc is only allowed to fail once.
pool_alloc2() used to pick the entry from the pool, fall back to
pool_refill_alloc(), and to perform the poisonning itself, which
pool_refill_alloc() was also doing. While this led to optimal
code size, it imposes memory poisonning on the buffers as well,
which is extremely slow on large buffers.
This patch cuts the allocator in 3 layers :
- a layer to pick the first entry from the pool without falling back to
pool_refill_alloc() : pool_get_first()
- a layer to allocate a dirty area by falling back to pool_refill_alloc()
but never performing the poisonning : pool_alloc_dirty()
- pool_alloc2() which calls the latter and optionally poisons the area
No functional changes were made.
Remove the code dealing with the old dual-linked lists imported from
librt that has remained unused for the last 8 years. Now everything
uses the linux-like circular lists instead.
Till now, when memory poisonning was enabled, it used to be done only
after a calloc(). But sometimes it's not enough to detect unexpected
sharing, so let's ensure that we now poison every allocation once it's
in place. Note that enabling poisonning significantly hurts performance
(it can typically half the overall performance).
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
pcre_study() has been around long before JIT has been added. It also seems to
affect the performance in some cases (positive).
Below I've attached some test restults. The test is based on
http://sljit.sourceforge.net/regex_perf.html (see bottom). It has been modified
to just test pcre_study vs. no pcre_study. Note: This test does not try to
match specific header it's instead run over a larger text with more and less
complex patterns to make the differences more clear.
% ./runtest
'mark.txt' loaded. (Length: 19665221 bytes)
-----------------
Regex: 'Twain'
[pcre-nostudy] time: 14 ms (2388 matches)
[pcre-study] time: 21 ms (2388 matches)
-----------------
Regex: '^Twain'
[pcre-nostudy] time: 109 ms (100 matches)
[pcre-study] time: 109 ms (100 matches)
-----------------
Regex: 'Twain$'
[pcre-nostudy] time: 14 ms (127 matches)
[pcre-study] time: 16 ms (127 matches)
-----------------
Regex: 'Huck[a-zA-Z]+|Finn[a-zA-Z]+'
[pcre-nostudy] time: 695 ms (83 matches)
[pcre-study] time: 26 ms (83 matches)
-----------------
Regex: 'a[^x]{20}b'
[pcre-nostudy] time: 90 ms (12495 matches)
[pcre-study] time: 91 ms (12495 matches)
-----------------
Regex: 'Tom|Sawyer|Huckleberry|Finn'
[pcre-nostudy] time: 1236 ms (3015 matches)
[pcre-study] time: 34 ms (3015 matches)
-----------------
Regex: '.{0,3}(Tom|Sawyer|Huckleberry|Finn)'
[pcre-nostudy] time: 5696 ms (3015 matches)
[pcre-study] time: 5655 ms (3015 matches)
-----------------
Regex: '[a-zA-Z]+ing'
[pcre-nostudy] time: 1290 ms (95863 matches)
[pcre-study] time: 1167 ms (95863 matches)
-----------------
Regex: '^[a-zA-Z]{0,4}ing[^a-zA-Z]'
[pcre-nostudy] time: 136 ms (4507 matches)
[pcre-study] time: 134 ms (4507 matches)
-----------------
Regex: '[a-zA-Z]+ing$'
[pcre-nostudy] time: 1334 ms (5360 matches)
[pcre-study] time: 1214 ms (5360 matches)
-----------------
Regex: '^[a-zA-Z ]{5,}$'
[pcre-nostudy] time: 198 ms (26236 matches)
[pcre-study] time: 197 ms (26236 matches)
-----------------
Regex: '^.{16,20}$'
[pcre-nostudy] time: 173 ms (4902 matches)
[pcre-study] time: 175 ms (4902 matches)
-----------------
Regex: '([a-f](.[d-m].){0,2}[h-n]){2}'
[pcre-nostudy] time: 1242 ms (68621 matches)
[pcre-study] time: 690 ms (68621 matches)
-----------------
Regex: '([A-Za-z]awyer|[A-Za-z]inn)[^a-zA-Z]'
[pcre-nostudy] time: 1215 ms (675 matches)
[pcre-study] time: 952 ms (675 matches)
-----------------
Regex: '"[^"]{0,30}[?!\.]"'
[pcre-nostudy] time: 27 ms (5972 matches)
[pcre-study] time: 28 ms (5972 matches)
-----------------
Regex: 'Tom.{10,25}river|river.{10,25}Tom'
[pcre-nostudy] time: 705 ms (2 matches)
[pcre-study] time: 68 ms (2 matches)
In some cases it's more or less the same but when it's faster than by a huge margin.
It always depends on the pattern, the string(s) to match against etc.
Signed-off-by: Christian Ruppert <c.ruppert@babiel.com>
This converter escapes string to use it as json/ascii escaped string.
It can read UTF-8 with differents behavior on errors and encode it in
json/ascii.
json([<input-code>])
Escapes the input string and produces an ASCII ouput string ready to use as a
JSON string. The converter tries to decode the input string according to the
<input-code> parameter. It can be "ascii", "utf8", "utf8s", "utf8"" or
"utf8ps". The "ascii" decoder never fails. The "utf8" decoder detects 3 types
of errors:
- bad UTF-8 sequence (lone continuation byte, bad number of continuation
bytes, ...)
- invalid range (the decoded value is within a UTF-8 prohibited range),
- code overlong (the value is encoded with more bytes than necessary).
The UTF-8 JSON encoding can produce a "too long value" error when the UTF-8
character is greater than 0xffff because the JSON string escape specification
only authorizes 4 hex digits for the value encoding. The UTF-8 decoder exists
in 4 variants designated by a combination of two suffix letters : "p" for
"permissive" and "s" for "silently ignore". The behaviors of the decoders
are :
- "ascii" : never fails ;
- "utf8" : fails on any detected errors ;
- "utf8s" : never fails, but removes characters corresponding to errors ;
- "utf8p" : accepts and fixes the overlong errors, but fails on any other
error ;
- "utf8ps" : never fails, accepts and fixes the overlong errors, but removes
characters corresponding to the other errors.
This converter is particularly useful for building properly escaped JSON for
logging to servers which consume JSON-formated traffic logs.
Example:
capture request header user-agent len 150
capture request header Host len 15
log-format {"ip":"%[src]","user-agent":"%[capture.req.hdr(1),json]"}
Input request from client 127.0.0.1:
GET / HTTP/1.0
User-Agent: Very "Ugly" UA 1/2
Output log:
{"ip":"127.0.0.1","user-agent":"Very \"Ugly\" UA 1\/2"}
A config where a tcp-request rule appears after an http-request rule
might seem valid but it is not. So let's report a warning about this
since this case is hard to detect by the naked eye.
Some users want to add their own data types to stick tables. We don't
want to use a linked list here for performance reasons, so we need to
continue to use an indexed array. This patch allows one to reserve a
compile-time-defined number of extra data types by setting the new
macro STKTABLE_EXTRA_DATA_TYPES to anything greater than zero, keeping
in mind that anything larger will slightly inflate the memory consumed
by stick tables (not per entry though).
Then calling stktable_register_data_store() with the new keyword will
either register a new keyword or fail if the desired entry was already
taken or the keyword already registered.
Note that this patch does not dictate how the data will be used, it only
offers the possibility to create new keywords and have an index to
reference them in the config and in the tables. The caller will not be
able to use stktable_data_cast() and will have to explicitly cast the
stable pointers to the expected types. It can be used for experimentation
as well.
