This patch sends the "{}" message to specify that a challenge is ready.
It iterates on every challenge URL in the authorization list from the
acme_ctx.
This allows the ACME server to procede to the challenge validation.
https://www.rfc-editor.org/rfc/rfc8555#section-7.5.1
This patch implements the retrieval of the challenges objects on the
authorizations URLs. The challenges object contains a token and a
challenge url that need to be called once the challenge is setup.
Each authorization URLs contain multiple challenge objects, usually one
per challenge type (HTTP-01, DNS-01, ALPN-01... We only need to keep the
one that is relevent to our configuration.
This patch implements the newOrder action in the ACME task, in order to
ask for a new certificate, a list of SAN is sent as a JWS payload.
the ACME server replies a list of Authorization URLs. One Authorization
is created per SAN on a Order.
The authorization URLs are stored in a linked list of 'struct acme_auth'
in acme_ctx, so we can get the challenge URLs from them later.
The location header is also store as it is the URL of the order object.
https://datatracker.ietf.org/doc/html/rfc8555#section-7.4
This patch implements the retrival of the KID (account identifier) using
the pkey.
A request is sent to the newAccount URL using the onlyReturnExisting
option, which allow to get the kid of an existing account.
acme_jws_payload() implement a way to generate a JWS payload using the
nonce, pkey and provided URI.
ACME requests are supposed to be sent with a Nonce, the first Nonce
should be retrieved using the newNonce URI provided by the directory.
This nonce is stored and must be replaced by the new one received in the
each response.
The first request of the ACME protocol is getting the list of URLs for
the next steps.
This patch implements the first request and the parsing of the response.
The response is a JSON object so mjson is used to parse it.
The "acme renew" command launch the ACME task for a given certificate.
The CLI parser generates a new private key using the parameters from the
acme section..
This commit allows to configure the generated private keys, you can
configure the keytype (RSA/ECDSA), the number of bits or the curves.
Example:
acme LE
uri https://acme-staging-v02.api.letsencrypt.org/directory
account account.key
contact foobar@example.com
challenge HTTP-01
keytype ECDSA
curves P-384
Add new acme keywords for the ckch_conf parsing, which will be used on a
crt-store, a crt line in a frontend, or even a crt-list.
The cfg_postparser_acme() is called in order to check if a section referenced
elsewhere really exists in the config file.
Add a configuration parser for the new acme section, the section is
configured this way:
acme letsencrypt
uri https://acme-staging-v02.api.letsencrypt.org/directory
account account.key
contact foobar@example.com
challenge HTTP-01
When unspecified, the challenge defaults to HTTP-01, and the account key
to "<section_name>.account.key".
Section are stored in a linked list containing acme_cfg structures, the
configuration parsing is mostly resolved in the postsection parser
cfg_postsection_acme() which is called after the parsing of an acme section.
Some rare commands in the worker require to keep their input open and
terminate when it's closed ("show events -w", "wait"). Others maintain
a per-session context ("set anon on"). But in its default operation
mode, the master CLI passes commands one at a time to the worker, and
closes the CLI's input channel so that the command can immediately
close upon response. This effectively prevents these two specific cases
from being used.
Here the approach that we take is to introduce a bidirectional mode to
connect to the worker, where everything sent to the master is immediately
forwarded to the worker (including the raw command), allowing to queue
multiple commands at once in the same session, and to continue to watch
the input to detect when the client closes. It must be a client's choice
however, since doing so means that the client cannot batch many commands
at once to the master process, but must wait for these commands to complete
before sending new ones. For this reason we use the prefix "@@<pid>" for
this. It works exactly like "@" except that it maintains the channel
open during the whole execution. Similarly to "@<pid>" with no command,
"@@<pid>" will simply open an interactive CLI session to the worker, that
will be ended by "quit" or by closing the connection. This can be convenient
for the user, and possibly for clients willing to dedicate a connection to
the worker.
The '@' prefix permits to execute a single command at once in a worker.
It is very handy but comes with some limitations affecting rare commands,
which is better to be documented (one command per session, input closed)
since it can seldom have user-visible effects.
While the examples were clear, the text did not fully imply what was
reflected there. Better have the text explicitly mention that the
'@' command may be used as a prefix or wrapper in front of a command
as well as a standalone command.
Released version 3.2-dev10 with the following main changes :
- REORG: ssl: move curves2nid and nid2nist to ssl_utils
- BUG/MEDIUM: stream: Fix a possible freeze during a forced shut on a stream
- MEDIUM: stream: Save SC and channel flags earlier in process_steam()
- BUG/MINOR: peers: fix expire learned from a peer not converted from ms to ticks
- BUG/MEDIUM: peers: prevent learning expiration too far in futur from unsync node
- CI: spell check: allow manual trigger
- CI: codespell: add "pres" to spellcheck whitelist
- CLEANUP: assorted typo fixes in the code, commits and doc
- CLEANUP: atomics: remove support for gcc < 4.7
- CLEANUP: atomics: also replace __sync_synchronize() with __atomic_thread_fence()
- TESTS: Fix build for filltab25.c
- MEDIUM: ssl: replace "crt" lines by "ssl-f-use" lines
- DOC: configuration: replace "crt" by "ssl-f-use" in listeners
- MINOR: backend: mark srv as nonnull in alloc_dst_address()
- BUG/MINOR: server: ensure check-reuse-pool is copied from default-server
- MINOR: server: activate automatically check reuse for rhttp@ protocol
- MINOR: check/backend: support conn reuse with SNI
- MINOR: check: implement check-pool-conn-name srv keyword
- MINOR: task: add thread safe notification_new and notification_wake variants
- BUG/MINOR: hlua_fcn: fix potential UAF with Queue:pop_wait()
- MINOR: hlua_fcn: register queue class using hlua_register_metatable()
- MINOR: hlua: add core.wait()
- MINOR: hlua: core.wait() takes optional delay paramater
- MINOR: hlua: split hlua_applet_tcp_recv_yield() in two functions
- MINOR: hlua: add AppletTCP:try_receive()
- MINOR: hlua_fcn: add Queue:alarm()
- MEDIUM: task: make notification_* API thread safe by default
- CLEANUP: log: adjust _lf_cbor_encode_byte() comment
- MEDIUM: ssl/crt-list: warn on negative wildcard filters
- MEDIUM: ssl/crt-list: warn on negative filters only
- BUILD: atomics: fix build issue on non-x86/non-arm systems
- BUG/MINOR: log: fix CBOR encoding with LOG_VARTEXT_START() + lf_encode_chunk()
- BUG/MEDIUM: sample: fix risk of overflow when replacing multiple regex back-refs
- DOC: configuration: rework the crt-list section
- MINOR: ring: support arbitrary delimiters through ring_dispatch_messages()
- MINOR: ring/cli: support delimiting events with a trailing \0 on "show events"
- DEV: h2: fix h2-tracer.lua nil value index
- BUG/MINOR: backend: do not use the source port when hashing clientip
- BUG/MINOR: hlua: fix invalid errmsg use in hlua_init()
- MINOR: proxy: add setup_new_proxy() function
- MINOR: checks: mark CHECKS-FE dummy frontend as internal
- MINOR: flt_spoe: mark spoe agent frontend as internal
- MEDIUM: tree-wide: avoid manually initializing proxies
- MINOR: proxy: add deinit_proxy() helper func
- MINOR: checks: deinit checks_fe upon deinit
- MINOR: flt_spoe: deinit spoe agent proxy upon agent release
Even though spoe agent proxy is statically allocated, it uses the proxy
API and is initialized like a regular proxy, thus specific cleanup is
required upon release. This is not tagged as a bug because as of now this
would only cause some minor memory leak upon deinit.
We check the presence of proxy->id to know if it was initialized since
we cannot rely on a pointer for that.
This is just to make valgrind and friends happy, leverage deinit_proxy()
for checks_fe proxy upon deinit to ensure proper cleanup.
We check the presence of proxy->id to know if it was initialized because
we cannot rely on a pointer for that.
Same as free_proxy(), but does not free the base proxy pointer (ie: the
proxy itself may not be allocated)
Goal is to be able to cleanup statically allocated dummy proxies.
In this patch we try to use the proxy API init functions as much as
possible to avoid code redundancy and prevent proxy initialization
errors. As such, we prefer using alloc_new_proxy() and setup_new_proxy()
instead of manually allocating the proxy pointer and performing the
base init ourselves.
spoe agent frontend is used by the agent internally, but it is not meant
to be directly exposed like user-facing proxies defined in the config.
As such, better mark it as internal using PR_CAP_INT capability to prevent
any mis-use.
CHECKS-FE frontend is a dummy frontend used to create checks sessions
as such, it is internal and should not be exposed to the user.
Better mark it as internal using PR_CAP_INT capability to prevent
proxy API from ever exposing it.
Split alloc_new_proxy() in two functions: the preparing part is now
handled by setup_new_proxy() which can be called individually, while
alloc_new_proxy() takes care of allocating a new proxy struct and then
calling setup_new_proxy() with the freshly allocated proxy.
errmsg is used with memprintf and friends, thus it must be NULL
initialized before being passed to memprintf, else invalid read will
occur.
However in hlua_init() the errmsg value isn't initialized, let's fix that
This is really minor because it would only cause issue on error paths,
yet it may be backported to all stable versions, just in case.
The server's "usesrc" keyword supports among other options "client"
and "clientip". The former means we bind to the client's IP and port
to connect to the server, while the latter means we bind to its IP
only. It's done in two steps, first alloc_bind_address() retrieves
the IP address and port, and second, tcp_connect_server() decides
to either bind to the IP only or IP+port.
The problem comes with idle connection pools, which hash all the
parameters: the hash is calculated before (and ideally withouy) calling
tcp_connect_server(), and it considers the whole struct sockaddr_storage
for the hash, except that both client and clientip entirely fill it with
the client's address. This means that both client and clientip make use
of the source port in the hash calculation, making idle connections
almost not reusable when using "usesrc clientip" while they should for
clients coming from the same source. A work-around is to force the
source port to zero using "tcp-request session set-src-port int(0)" but
it's ugly.
Let's fix this by properly zeroing the port for AF_INET/AF_INET6 addresses.
This can be backported to 2.4. Thanks to Sebastien Gross for providing a
reproducer for this problem.
Nick Ramirez reported the following error while testing the h2-tracer.lua
script:
Lua filter 'h2-tracer' : [state-id 0] runtime error: /etc/haproxy/h2-tracer.lua:227: attempt to index a nil value (field '?') from /etc/haproxy/h2-tracer.lua:227: in function line 109.
It is caused by h2ff indexing with an out of bound value. Indeed, h2ff
is indexed with the frame type, which can potentially be > 9 (not common
nor observed during Willy's tests), while h2ff only defines indexes from
0 to 9.
The fix was provided by Willy, it consists in skipping h2ff indexing if
frame type is > 9. It was confirmed that doing so fixes the error.
At the moment it is not supported to produce multi-line events on the
"show events" output, simply because the LF character is used as the
default end-of-event mark. However it could be convenient to produce
well-formatted multi-line events, e.g. in JSON or other formats. UNIX
utilities have already faced similar needs in the past and added
"-print0" to "find" and "-0" to "xargs" to mention that the delimiter
is the NUL character. This makes perfect sense since it's never present
in contents, so let's do exactly the same here.
Thus from now on, "show events <ring> -0" will delimit messages using
a \0 instead of a \n, permitting a better and safer encapsulation.
In order to support delimiting output events with other characters than
just the LF, let's pass the delimiter through the API. The default remains
the LF, used by applet_append_line(), and ignored by the log forwarder.
Aleandro Prudenzano of Doyensec and Edoardo Geraci of Codean Labs
reported a bug in sample_conv_regsub(), which can cause replacements
of multiple back-references to overflow the temporary trash buffer.
The problem happens when doing "regsub(match,replacement,g)": we're
replacing every occurrence of "match" with "replacement" in the input
sample, which requires a length check. For this, a max is applied, so
that a replacement may not use more than the remaining length in the
buffer. However, the length check is made on the replaced pattern and
not on the temporary buffer used to carry the new string. This results
in the remaining size to be usable for each input match, which can go
beyond the temporary buffer size if more than one occurrence has to be
replaced with something that's larger than the remaining room.
The fix proposed by Aleandro and Edoardo is the correct one (check on
"trash" not "output"), and is the one implemented in this patch.
While it is very unlikely that a config will replace multiple short
patterns each with a larger one in a request, this possibility cannot
be entirely ruled out (e.g. mask a known, short IP address using
"XXX.XXX.XXX.XXX"). However when this happens, the replacement pattern
will be static, and not be user-controlled, which is why this patch is
marked as medium.
The bug was introduced in 2.2 with commit 07e1e3c93e ("MINOR: sample:
regsub now supports backreferences"), so it must be backported to all
versions.
Special thanks go to Aleandro and Edoardo for reporting this bug with
a simple reproducer and a fix.
There have been some reports that using %HV logformat alias with CBOR
encoder would produce invalid CBOR payload according to some CBOR
implementations such as "cbor.me". Indeed, with the below log-format:
log-format "%{+cbor}o %(protocol)HV"
And the resulting CBOR payload:
BF6870726F746F636F6C7F48485454502F312E31FFFF
cbor.me would complain with: "bytes/text mismatch (ASCII-8BIT != UTF-8) in
streaming string") error message.
It is due to the version string being first announced as text, while CBOR
encoder actually encodes it as byte string later when lf_encode_chunk()
is used.
In fact it affects all patterns combining LOG_VARTEXT_START() with
lf_encode_chunk() which means %HM, %HU, %HQ, %HPO and %HP are also
affected. To fix the issue, in _lf_encode_bytes() (which is
lf_encode_chunk() helper), we now check if we are inside a VARTEXT (we
can tell it if ctx->in_text is true), in which case we consider that we
already announced the current data as regular text so we keep the same
type to encode the bytes from the chunk to prevent inconsistencies.
It should be backported in 3.0
Commit f435a2e518 ("CLEANUP: atomics: also replace __sync_synchronize()
with __atomic_thread_fence()") replaced the builtins used for barriers,
but the different API required an argument while the macros didn't specify
any, resulting in double parenthesis that were causing obscure build errors
such as "called object type 'void' is not a function or function pointer".
Let's just specify the args for the macro. No backport is needed.
negative SNI filters on crt-list lines only have a meaning when they
match a positive wildcard filter. This patch adds a warning which
is emitted when trying to use negative filters without any wildcard on
the same line.
This was discovered in ticket #2900.
negative wildcard filters were always a noop, and are not useful for
anything unless you want to use !* alone to remove every name from a
certificate.
This is confusing and the documentation never stated it correctly. This
patch adds a warning during the bind initialization if it founds one,
only !* does not emit a warning.
This patch was done during the debugging of issue #2900.
_lf_cbor_encode_byte() comment was not updated in c33b857df ("MINOR: log:
support true cbor binary encoding") to reflect the new behavior.
Indeed, binary form is now supported. Updating the comment that says
otherwise.
Some notification_* functions were not thread safe by default as they
assumed only one producer would emit events for registered tasks.
While this suited well with the Lua sockets use-case, this proved to
be a limitation with some other event sources (ie: lua Queue class)
instead of having to deal with both the non thread safe and thread
safe variants (_mt suffix), which is error prone, let's make the
entire API thread safe regarding the event list.
Pruning functions still require that only one thread executes them,
with Lua this is always the case because there is one cleanup list
per context.
Queue:alarm() sets a wakeup alarm on the task when new data becomes
available on Queue. It must be re-armed for each event.
Lua documentation was updated
This is the non-blocking variant for AppletTCP:receive(). It doesn't
take any argument, instead it tries to read as much data as available
at once. If no data is available, empty string is returned.
Lua documentation was updated.
core.wait() now accepts optional delay parameter in ms. Passed this delay
the task is woken up if no event woke the task before.
Lua documentation was updated.
Similar to core.yield(), except that the task is not woken up
automatically, instead it waits for events to trigger the task
wakeup.
Lua documentation was updated.
If Queue:pop_wait() excecuted from a stream context and pop_wait() is
aborted due to a Lua or ressource error, then the waiting object pointing
to the task will still be registered, so if the task eventually dissapears,
Queue:push() may try to wake invalid task pointer..
To prevent this bug from happening, we now rely on notification_* API to
deliver waiting signals. This way signals are properly garbage collected
when a lua context is destroyed.
It should be backported in 2.8 with 86fb22c55 ("MINOR: hlua_fcn: add Queue
class").
This patch depends on ("MINOR: task: add thread safe notification_new and
notification_wake variants")
notification_new and notification_wake were historically meant to be
called by a single thread doing both the init and the wakeup for other
tasks waiting on the signals.
In this patch, we extend the API so that notification_new and
notification_wake have thread-safe variants that can safely be used with
multiple threads registering on the same list of events and multiple
threads pushing updates on the list.
This commit is a direct follow-up of the previous one. It defines a new
server keyword check-pool-conn-name. It is used as the default value for
the name parameter of idle connection hash generation.
Its behavior is similar to server keyword pool-conn-name, but reserved
for checks reuse. If check-pool-conn-name is set, it is used in priority
to match a connection for reuse. If unset, a fallback is performed on
check-sni.
Support for connection reuse during server checks was implemented
recently. This is activated with the server keyword check-reuse-pool.
Similarly to stream processing via connect_backend(), a connection hash
is calculated when trying to perform reuse for checks. This is necessary
to retrieve for a connection which shares the check connect parameters.
However, idle connections can additionnally be tagged using a
pool-conn-name or SNI under connect_backend(). Check reuse does not test
these values, which prevent to retrieve a matching connection.
Improve this by using "check-sni" value as idle connection hash input
for check reuse. be_calculate_conn_hash() API has been adjusted so that
name value can be passed as input, both when using streams or checks.
Even with the current patch, there is still some scenarii which could
not be covered for checks connection reuse. most notably, when using
dynamic pool-conn-name/SNI value. It is however at least sufficient to
cover simpler cases.
Without check-reuse-pool, it is impossible to perform check on server
using @rhttp protocol. This is due to the inherent nature of the
protocol which does not implement an active connect method.
Thus, ensure that check-reuse-pool is always set when a reverse HTTP
server is declared. This reduces server configuration and should prevent
any omission. Note that it is still require to add "check" server
keyword so activate server checks.
