With extra-large buffers, it is possible that a lot of data are sent upon
connection establishment before the session is notified. The issue is how
to handle a send() error after some data were actually sent.
At the moment, only a connection error is reported, causing a new connection
attempt and send() to restart after the last data. We absolutely don't want
to retry the connect() if at least one byte was sent, because those data are
lost.
The solution consists in reporting exactly what happens, which is :
- a successful connection attempt
- a read/write error on the channel
That way we go on with sess_establish(), the response analysers are called
and report the appropriate connection state for the error (typically a server
abort while waiting for a response). This mechanism also guarantees that we
won't retry since it's a success. The logs also report the correct connect
time.
Note that 1.4 is not directly affected because it only attempts one send(),
so it cannot detect a send() failure here and distinguish it form a failed
connection attempt. So no backport is needed. Also, this is just a safe belt
we're taking, since this issue should not happen anymore since previous commit.
The trash is used everywhere to store the results of temporary strings
built out of s(n)printf, or as a storage for a chunk when chunks are
needed.
Using global.tune.bufsize is not the most convenient thing either.
So let's replace trash with a chunk and directly use it as such. We can
then use trash.size as the natural way to get its size, and get rid of
many intermediary chunks that were previously used.
The patch is huge because it touches many areas but it makes the code
a lot more clear and even outlines places where trash was used without
being that obvious.
We will need to be able to switch server connections on a session and
to keep idle connections. In order to achieve this, the preliminary
requirement is that the connections can survive the session and be
detached from them.
Right now they're still allocated at exactly the same place, so when
there is a session, there are always 2 connections. We could soon
improve on this by allocating the outgoing connection only during a
connect().
This current patch touches a lot of code and intentionally does not
change any functionnality. Performance tests show no regression (even
a very minor improvement). The doc has not yet been updated.
This commit introduces HTTP compression using the zlib library.
http_response_forward_body has been modified to call the compression
functions.
This feature includes 3 algorithms: identity, gzip and deflate:
* identity: this is mostly for debugging, and it was useful for
developping the compression feature. With Content-Length in input, it
is making each chunk with the data available in the current buffer.
With chunks in input, it is rechunking, the output chunks will be
bigger or smaller depending of the size of the input chunk and the
size of the buffer. Identity does not apply any change on data.
* gzip: same as identity, but applying a gzip compression. The data
are deflated using the Z_NO_FLUSH flag in zlib. When there is no more
data in the input buffer, it flushes the data in the output buffer
(Z_SYNC_FLUSH). At the end of data, when it receives the last chunk in
input, or when there is no more data to read, it writes the end of
data with Z_FINISH and the ending chunk.
* deflate: same as gzip, but with deflate algorithm and zlib format.
Note that this algorithm has ambiguous support on many browsers and
no support at all from recent ones. It is strongly recommended not
to use it for anything else than experimentation.
You can't choose the compression ratio at the moment, it will be set to
Z_BEST_SPEED (1), as tests have shown very little benefit in terms of
compression ration when going above for HTML contents, at the cost of
a massive CPU impact.
Compression will be activated depending of the Accept-Encoding request
header. With identity, it does not take care of that header.
To build HAProxy with zlib support, use USE_ZLIB=1 in the make
parameters.
This work was initially started by David Du Colombier at Exceliance.
This field was used to trace precisely where a session was terminated
but it did not survive code rearchitecture and was not used at all
anymore. Let's get rid of it.
With this commit, we now separate the channel from the buffer. This will
allow us to replace buffers on the fly without touching the channel. Since
nobody is supposed to keep a reference to a buffer anymore, doing so is not
a problem and will also permit some copy-less data manipulation.
Interestingly, these changes have shown a 2% performance increase on some
workloads, probably due to a better cache placement of data.
This flag will have to be set on log tags which require transport layer
information. They will prevent the conn_xprt_close() call from releasing
the transport layer too early.
When we start logging SSL information, we need the SSL struct to be
present even past the conn_xprt_close() call. In order to achieve this,
we should use refcounting on the connection and the transport layer. At
the moment it's not worth using plain refcounting as only the logs require
this, so instead of real refcounting we just use a flag which will be set
by the log subsystem when SSL data need to be logged.
What happens then is that the xprt->close() call is ignored and the
transport layer is closed again during session_free(), after the log
line is emitted.
This callback was introduced by commit 9683e9a0 but never enabled because
the CO_FL_WAKE_DATA flag was not set. The result is that this function is
never called when an SSL handshake fails, so the connection is only closed
on timeout.
Commit 82569f91 moved the health and monitor-net checks to session.c
but a debug test introduced 0& to disable MSG_DONTWAIT in the recv()
call and this debug code remained there. Since the socket is marked
non-blocking, there should be no effect but it's dangerous to keep
such a thing here.
On Linux, accept4() does the same as accept() except that it allows
the caller to specify some flags to set on the resulting socket. We
use this to set the O_NONBLOCK flag and thus to save one fcntl()
call in each connection. The effect is a small performance gain of
around 1%.
The option is automatically enabled when target linux2628 is set, or
when the USE_ACCEPT4 Makefile variable is set. If the libc is too old
to provide the equivalent function, this is automatically detected and
our own function is used instead. In any case it is possible to force
the use of our implementation with USE_MY_ACCEPT4.
The connection layer will soon call ->wake() only when errors happen, and
not ->init(). So make the session layer use this callback to detect errors
and abort connections.
The generic data-layer init callback is now used after the transport
layer is complete and before calling the data layer recv/send callbacks.
This allows the session to switch from the embryonic session data layer
to the complete stream interface data layer, by making conn_session_complete()
the data layer's init callback.
It sill looks awkwards that the init() callback must be used opon error,
but except by adding yet another one, it does not seem to be mergeable
into another function (eg: it should probably not be merged with ->wake
to avoid unneeded calls during the handshake, though semantically that
would make sense).
We don't want to have the recv or send callbacks in embryonic
sessions, and we want the stream interface to be referenced as
the connection owner only once the session is instanciated. So
let's first have the embryonic session be the owner, then replaced
later by the stream interface once the transport layer is ready.
Instead of calling conn_notify_si() from the connection handler, we
now call data->wake(), which will allow us to use a different callback
with health checks.
Note that we still rely on a flag in order to decide whether or not
to call this function. The reason is that with embryonic sessions,
the callback is already initialized to si_conn_cb without the flag,
and we can't call the SI notify function in the leave path before
the stream interface is initialized.
This issue should be addressed by involving a different data_cb for
embryonic sessions and for stream interfaces, that would be changed
during session_complete() for the final data_cb.
While working on the changes required to make the health checks use the
new connections, it started to become obvious that some naming was not
logical at all in the connections. Specifically, it is not logical to
call the "data layer" the layer which is in charge for all the handshake
and which does not yet provide a data layer once established until a
session has allocated all the required buffers.
In fact, it's more a transport layer, which makes much more sense. The
transport layer offers a medium on which data can transit, and it offers
the functions to move these data when the upper layer requests this. And
it is the upper layer which iterates over the transport layer's functions
to move data which should be called the data layer.
The use case where it's obvious is with embryonic sessions : an incoming
SSL connection is accepted. Only the connection is allocated, not the
buffers nor stream interface, etc... The connection handles the SSL
handshake by itself. Once this handshake is complete, we can't use the
data functions because the buffers and stream interface are not there
yet. Hence we have to first call a specific function to complete the
session initialization, after which we'll be able to use the data
functions. This clearly proves that SSL here is only a transport layer
and that the stream interface constitutes the data layer.
A similar change will be performed to rename app_cb => data, but the
two could not be in the same commit for obvious reasons.
We were having several different behaviours with monitor-net and
"mode health" :
- monitor-net on TCP connections was evaluated just after accept(),
did not count a connection on the frontend and were not subject
to tcp-request connection rules, and caused an immediate close().
- monitor-net in HTTP mode was evaluated once the session was
accepted (eg: on top of SSL), returned "HTTP/1.0 200 OK\r\n\r\n"
over the connection's data layer and instanciated a session which
was responsible for closing this connection. A connection AND a
session were counted for the frontend ;
- "mode health" with "option httpchk" would do exactly the same as
monitor-net in HTTP mode ;
- "mode health" without "option httpchk" would do the same as above
except that "OK" was returned instead of "HTTP/1.0 200 OK\r\n\r\n".
None of them took care of cleaning the input buffer, sometimes resulting
in a TCP reset to be emitted after the last packet if a request was received
over the connection.
Given the inconsistencies and the complexity in keeping all these features
handled at the right position, we now slightly changed the way they are
handled :
- all of them are handled just after the "tcp-request connection" rules,
so that all of them may be blocked using such rules, offering more
flexibility and consistency ;
- no connection handshake is performed anymore for non-TCP modes
- all of them send the response as raw data over the socket, there is no
more difference between TCP and HTTP mode for example (these rules were
never meant to be served over SSL connections and were never documented
as able to do that).
- any possible pending data on the incoming socket is drained before the
response is sent, in order to avoid the risk of a reset.
- none of them exactly did what was documented !
This results in more consistent, more flexible and more accurate handling of
monitor rules, with smaller and more robust code.
It appears that fd.h includes a number of unneeded files and was
included from standard.h, and as such served as an intermediary
to provide almost everything to everyone.
By removing its useless includes, a long dependency chain broke
but could easily be fixed.
These flags were added for TCP_CORK. They were only set at various places
but never checked by any user since TCP_CORK was replaced with MSG_MORE.
Simply get rid of this now.
The PROXY protocol is now decoded in the connection before other
handshakes. This means that it may be extracted from a TCP stream
before SSL is decoded from this stream.
When an incoming connection request is accepted, a connection
structure is needed to store its state. However we don't want to
fully initialize a session until the data layer is about to be
ready.
As long as the connection is physically stored into the session,
it's not easy to split both allocations.
As such, we only initialize the minimum requirements of a session,
which results in what we call an embryonic session. Then once the
data layer is ready, we can complete the function's initialization.
Doing so avoids buffers allocation and ensures that a session only
sees ready connections.
The frontend's client timeout is used as the handshake timeout. It
is likely that another timeout will be used in the future.
SSL need to initialize the data layer before proceeding with data. At
the moment, this data layer is automatically initialized from itself,
which will not be possible once we extract connection from sessions
since we'll only create the data layer once the handshake is finished.
So let's have the application layer initialize the data layer before
using it.
Make it more obvious that this function does not depend on any knowledge
of the session. This is important to plan for TCP rules that can run on
connection without any initialized session yet.
These ones are implicitly handled by the connection's data layer, no need
to rely on them anymore and reaching them maintains undesired dependences
on stream-interface.
We need to have the source and destination addresses in the connection.
They were lying in the stream interface so let's move them. The flags
SI_FL_FROM_SET and SI_FL_TO_SET have been moved as well.
It's worth noting that tcp_connect_server() almost does not use the
stream interface anymore except for a few flags.
It has been identified that once we detach the connection from the SI,
it will probably be needed to keep a copy of the server-side addresses
in the SI just for logging purposes. This has not been implemented right
now though.
This is a massive rename of most functions which should make use of the
word "channel" instead of the word "buffer" in their names.
In concerns the following ones (new names) :
unsigned long long channel_forward(struct channel *buf, unsigned long long bytes);
static inline void channel_init(struct channel *buf)
static inline int channel_input_closed(struct channel *buf)
static inline int channel_output_closed(struct channel *buf)
static inline void channel_check_timeouts(struct channel *b)
static inline void channel_erase(struct channel *buf)
static inline void channel_shutr_now(struct channel *buf)
static inline void channel_shutw_now(struct channel *buf)
static inline void channel_abort(struct channel *buf)
static inline void channel_stop_hijacker(struct channel *buf)
static inline void channel_auto_connect(struct channel *buf)
static inline void channel_dont_connect(struct channel *buf)
static inline void channel_auto_close(struct channel *buf)
static inline void channel_dont_close(struct channel *buf)
static inline void channel_auto_read(struct channel *buf)
static inline void channel_dont_read(struct channel *buf)
unsigned long long channel_forward(struct channel *buf, unsigned long long bytes)
Some functions provided by channel.[ch] have kept their "buffer" name because
they are really designed to act on the buffer according to some information
gathered from the channel. They have been moved together to the same place in
the file for better readability but they were not changed at all.
The "buffer" memory pool was also renamed "channel".
Get rid of these confusing BF_* flags. Now channel naming should clearly
be used everywhere appropriate.
No code was changed, only a renaming was performed. The comments about
channel operations was updated.
This flag is quite complex to get right and updating it everywhere is a
major pain, especially since the buffer/channel split. This is the first
step of getting rid of it. Instead now it's dynamically computed whenever
needed.
This flag was very problematic because it was composite in that both changes
to the pipe or to the buffer had to cause this flag to be updated, which is
not always simple (eg: there may not even be a channel attached to a buffer
at all).
There were not that many users of this flags, mostly setters. So the flag got
replaced with a macro which reports whether the channel is empty or not, by
checking both the pipe and the buffer.
One part of the change is sensible : the flag was also part of BF_MASK_STATIC,
which is used by process_session() to rescan all analysers in case the flag's
status changes. At first glance, none of the analysers seems to change its
mind base on this flag when it is subject to change, so it seems fine not to
add variation checks here. Otherwise it's possible that checking the buffer's
output size is more useful than checking the flag's replacement.
Some parts of the sock_ops structure were only used by the stream
interface and have been moved into si_ops. Some of them were callbacks
to the stream interface from the connection and have been moved into
app_cp as they're the application seen from the connection (later,
health-checks will need to use them). The rest has moved to data_ops.
Normally at this point the connection could live without knowing about
stream interfaces at all.
The splicing is now provided by the data-layer rcv_pipe/snd_pipe functions
which in turn are called by the stream interface's recv and send callbacks.
The presence of the rcv_pipe/snd_pipe functions is used to attest support
for splicing at the data layer. It looks like the stream-interface's
SI_FL_CAP_SPLICE flag does not make sense anymore as it's used as a proxy
for the pointers above.
It also appears that we call chk_snd() from the recv callback and then
try to call it again in update_conn(). It is very likely that this last
function will progressively slip into the recv/send callbacks in order
to avoid duplicate check code.
The code works right now with and without splicing. Only raw_sock provides
support for it and it is automatically selected when the various splice
options are set. However it looks like splice-auto doesn't enable it, which
possibly means that the streamer detection code does not work anymore, or
that it's only called at a time where it's too late to enable splicing (in
process_session).
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
At the moment, the struct is still embedded into the struct channel, but
all the functions have been updated to use struct buffer only when possible,
otherwise struct channel. Some functions would likely need to be splitted
between a buffer-layer primitive and a channel-layer function.
Later the buffer should become a pointer in the struct buffer, but doing so
requires a few changes to the buffer allocation calls.
This is a massive rename. We'll then split channel and buffer.
This change needs a lot of cleanups. At many locations, the parameter
or variable is still called "buf" which will become ambiguous. Also,
the "struct channel" is still defined in buffers.h.
Now the connection handler, the handshake callbacks and the I/O callbacks
make use of the connection-layer polling functions to enable or disable
polling on a file descriptor.
Some changes still need to be done to avoid using the FD_WAIT_* constants.
These functions have a more explicity meaning and will offer provisions
for explicit polling.
EV_FD_ISSET() has been left for now as it is still in use in checks.
The socket data layer code must only focus on moving data between a
socket and a buffer. We need a special stream interface handler to
update the stream interface and the file descriptor status.
At the moment the code works but suffers from a race condition caused
by its API : the read/write callbacks still make use of the fd instead
of using the connection. And when a double shutdown is performed, a call
to ->write() after ->read() processed an error results in dereferencing
a NULL fdtab[]->owner. This is only a temporary issue which doesn't need
to be fixed now since this will automatically go away when the functions
change to use the connection instead.
fdtab[].state was only used to know whether a connection was in progress
or an error was encountered. Instead we now use connection->flags to store
a flag for both. This way, connection management will be able to update the
connection status on I/O.
In an attempt to get rid of fdtab[].state, and to move the relevant
parts to the connection struct, we remove the FD_STCLOSE state which
can easily be deduced from the <owner> pointer as there is a 1:1 match.
The destination address is purely a connection thing and not an fd thing.
It's also likely that later the address will be stored into the connection
and linked to by the SI.
struct fdinfo only keeps the pointer to the port range and the local port
for now. All of this also needs to move to the connection but before this
the release of the port range must move from fd_delete() to a new function
dedicated to the connection.
The listener struct is now aware of the socket layer to use upon accept().
At the moment, only sock_raw is supported so this patch should not change
anything.
When the target is a client, it will be convenient to have a pointer to the
original listener so that we can retrieve some configuration information at
the stream interface level.
We start to move everything needed to manage a connection to a special
entity "struct connection". We have the data layer operations and the
control operations there. We'll also have more info in the future such
as file descriptors and applet contexts, so that in the end it becomes
detachable from the stream interface, which will allow connections to
be reused between sessions.
For now on, we start with minimal changes.
It does not make sense anymore to wait for a session creation to process
a TCP monitor check which only closes the connection and returns. Better
to process this immediately after the accept() return. It also saves us
from counting a connection for monitor checks, which is much more logical.
Calling the init() function in sess_establish was a bad idea, it is
too late to allow it to fail on lack of resource and does not help at
all. Remove it for now before it's used.
This flag indicates that we're not interested in keeping half-open
connections on a stream interface. It has the benefit of allowing
the socket layer to cause an immediate write close when detecting
an incoming read close. This releases resources much faster and
saves one syscall (either a shutdown or setsockopt).
This flag is only set by HTTP on the interface going to the server
since we don't want to continue pushing data there when it has
closed.
Another benefit is that it responds with a FIN to a server's FIN
instead of responding with an RST as it used to, which is much
cleaner.
Performance gains of 7.5% have been measured on HTTP connection
rate on empty objects.
These pointers were used to hold pointers to buffers in the past, but
since we introduced the stream interface, they're no longer used but
they were still sometimes set.
Removing them shrink the struct fdtab from 32 to 24 bytes on 32-bit machines,
and from 52 to 36 bytes on 64-bit machines, which is a significant saving. A
quick tests shows a steady 0.5% performance gain, probably due to the better
cache efficiency.
Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
In sess_establish, once we've prepared everythin, we can call the socket layer
init function. We pass an argument for targets which have one (eg: servers). At
the moment, the existing socket layers don't have init functions, but SSL will
need one.
Similarly to the previous patch, we don't need the socket-layer functions
outside of stream_interface. They could even move to a file dedicated to
applets, though that does not seem particularly useful at the moment.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
Last memory poisonning patch immediately made this issue appear.
The unique_id field is released but not properly initialized. The
feature was introduced very recently, no backport is needed.
Commit b22e55bc introduced send_proxy_ofs but forgot to initialize it,
which remained unnoticed since it's always at the same place in the
stream interface. On a machine with dirty RAM returned by malloc(),
some responses were holding a PROXY header, which normally is not
possible.
The problem goes away after properly initializing the field upon each
new session_accept().
This fix does not need to be backported except if any code makes use of
a backport of this feature.
These operators are used regardless of the socket protocol family. Move
them to a "sock_ops" struct. ->read and ->write have been moved there too
as they have no reason to remain at the protocol level.
This is mainly a massive renaming in the code to get it in line with the
calling convention. Next patch will rename a few files to complete this
operation.
Patterns were using a bitmask to indicate if request or response was desired
in fetch functions and keywords. ACLs were using a bitmask in fetch keywords
and a single bit in fetch functions. ACLs were also using an ACL_PARTIAL bit
in fetch functions indicating that a non-final fetch was performed, which was
an abuse of the existing direction flag.
The change now consists in using :
- a capabilities field for fetch keywords => SMP_CAP_REQ/RES to indicate
if a keyword supports requests, responses, both, etc...
- an option field for fetch functions to indicate what the caller expects
(request/response, final/non-final)
The ACL_PARTIAL bit was reversed to get SMP_OPT_FINAL as it's more explicit
to know we're working on a final buffer than on a non-final one.
ACL_DIR_* were removed, as well as PATTERN_FETCH_*. L4 fetches were improved
to support being called on responses too since they're still available.
The <dir> field of all fetch functions was changed to <opt> which is now
unsigned.
The patch is large but mostly made of cosmetic changes to accomodate this, as
almost no logic change happened.
Having the args everywhere will make it easier to share fetch functions
between patterns and ACLs. The only place where we could have needed
the expr was in the http_prefetch function which can do well without.
This one is not needed anymore as we can return the data and its type in the
sample provided by the caller. ACLs now always return the proper type. BOOL
is already returned when the result is expected to be processed as a boolean.
temp_pattern has been unexported now.
The new sample types are necessary for the acl-pattern convergence.
These types are boolean and signed int. Some types were renamed for
less ambiguity (ip->ipv4, integer->uint).
A large number of ACLs make use of frontend, backend or table names in their
arguments, and fall back to the current proxy when no argument is passed. If
the expected capability is not available, the ACL silently fails at runtime.
Now we make all those names mandatory in the parser and we rely on
acl_find_targets() to replace the missing names with the holding proxy,
then to perform the appropriate tests, and to reject errors at parsing
time.
It is possible that some faulty configurations will get rejected from now
on, while they used to silently fail till now. This is the reason why this
change is marked as MAJOR.
Proxy names are now resolved when the config is parsed and not at runtime.
This means that errors will be caught for real instead of having an ACL
silently never match. Another benefit is that the fetch will be much faster
since the lookup will not have to be performed anymore, eg for all ACLs
based on explicitly named stick-tables.
However some buggy configurations which used to silently fail in the past
will now refuse to load, hence the MAJOR tag.
The types and minimal number of ACL keyword arguments are now stored in
their declaration. This will allow many more fantasies if some ACL use
several arguments or types.
Doing so required to rework all ACL keyword declarations to add two
parameters. So this was a good opportunity for a general cleanup and
to sort all entries in alphabetical order.
We still have two pending issues :
- parse_acl_expr() checks for errors but has no way to report them to
the user ;
- the types of some arguments are still not resolved and kept as strings
(eg: ARGT_FE/BE/TAB) for compatibility reasons, which must be resolved
in acl_find_targets()
The ACL parser now uses the argument parser to build a typed argument list.
Right now arguments are all strings and only one argument is supported since
this is what ACLs currently support.
ACLs and patterns only rely on a struct http_msg and don't know the pointer
to the actual data. struct http_msg will soon only hold relative references
so that's not possible. We need http_msg to hold a reference to the struct
buffer before having relative pointers everywhere.
It is likely that doing so will also result in opportunities to simplify
a number of functions arguments. The following functions are already
candidate :
http_buffer_heavy_realign
http_capture_bad_message
http_change_connection_header
http_forward_trailers
http_header_add_tail
http_header_add_tail2
http_msg_analyzer
http_parse_chunk_size
http_parse_connection_header
http_remove_header2
http_send_name_header
http_skip_chunk_crlf
http_upgrade_v09_to_v10
We don't have buf->l anymore. We have buf->i for pending data and
the total length is retrieved by adding buf->o. Some computation
already become simpler.
Despite extreme care, bugs are not excluded.
It's worth noting that msg->err_pos as set by HTTP request/response
analysers becomes relative to pending data and not to the beginning
of the buffer. This has not been completed yet so differences might
occur when outgoing data are left in the buffer.
Too many flags are stored in the transaction structure. Some flags are
clearly message-specific and exist in two versions (request and response).
Move them to a new "flags" field in the http_message struct instead.
There were a few unchecked write() calls in the debug code that cause
gcc 4.x to emit warnings on recent libc. We don't want to check them
as we can't make anything from the result, let's simply surround them
with an empty if statement.
Note that one of the warnings was for chdir("/") which normally cannot
fail since it follows a successful chroot (which means the perms are
necessarily there). Anyway let's move the call uppe to protect it too.
These callbacks are used to retrieve the source and destination address
of a socket. The address flags are not hold on the stream interface and
not on the session anymore. The addresses are collected when needed.
This still needs to be improved to store the IP and port separately so
that it is not needed to perform a getsockname() when only the IP address
is desired for outgoing traffic.
Sometimes it is desirable to forward a particular request to a specific
server without having to declare a dedicated backend for this server. This
can be achieved using the "use-server" rules. These rules are evaluated after
the "redirect" rules and before evaluating cookies, and they have precedence
on them. There may be as many "use-server" rules as desired. All of these
rules are evaluated in their declaration order, and the first one which
matches will assign the server.
I downloaded version 1.4.19 this morning. While merging the code changes
to a custom build that we have here for our project I noticed a typo in
'session.c', in the new code for inserting the server name in the HTTP
header. The fix that I did is shown in the patch below.
[WT: the bug is harmless, it is only suboptimal]
New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
All ACL fetches which return integer value now store the result into
the temporary pattern struct. All ACL matches which rely on integer
also get their value there.
Note: the pattern data types are not set right now.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
We already had the ability to kill a connection, but it was only
for the checks. Now we can do this for any session, and for this we
add a specific flag "K" to the logs.
Instead of waking a listener up then making it sleep, we only wake them up
if we know their rate limit is fine. In the future we could improve on top
of that by deciding to wake a proxy-specific task in XX milliseconds to
take care of enabling the listeners again.
All listeners that are limited by a proxy-specific resource are now
queued at the proxy's and not globally. This allows finer-grained
wakeups when releasing resource.
When an accept() fails because of a connection limit or a memory shortage,
we now disable it and queue it so that it's dequeued only when a connection
is released. This has improved the behaviour of the process near the fd limit
as now a listener with a no connection (eg: stats) will not loop forever
trying to get its connection accepted.
The solution is still not 100% perfect, as we'd like to have this used when
proxy limits are reached (use a per-proxy list) and for safety, we'd need
to have dedicated tasks to periodically re-enable them (eg: to overcome
temporary system-wide resource limitations when no connection is released).
When we fail to create a session because of memory shortage, let's at
least try to send a 500 message directly on the socket. Even if we don't
have any buffers left, the kernel's orphans management will take care of
delivering the message as long as there are socket buffers left.
Patch af5149 introduced an issue which can be detected only on out of
memory conditions : a LIST_DEL() may be performed on an uninitialized
struct member instead of a LIST_INIT() during the accept() phase,
causing crashes and memory corruption to occur.
This issue was detected and diagnosed by the Exceliance R&D team.
This is 1.5-specific and very recent, so no existing deployment should
be impacted.
Never add connections allocated to this sever to a stick-table.
This may be used in conjunction with backup to ensure that
stick-table persistence is disabled for backup servers.
The motivation for this is to allow iteration of all the connections
of a server without the expense of iterating over the global list
of connections.
The first use of this will be to implement an option to close connections
associated with a server when is is marked as being down or in maintenance
mode.
There are some very rare server-to-server applications that abuse the HTTP
protocol and expect the payload phase to be highly interactive, with many
interleaved data chunks in both directions within a single request. This is
absolutely not supported by the HTTP specification and will not work across
most proxies or servers. When such applications attempt to do this through
haproxy, it works but they will experience high delays due to the network
optimizations which favor performance by instructing the system to wait for
enough data to be available in order to only send full packets. Typical
delays are around 200 ms per round trip. Note that this only happens with
abnormal uses. Normal uses such as CONNECT requests nor WebSockets are not
affected.
When "option http-no-delay" is present in either the frontend or the backend
used by a connection, all such optimizations will be disabled in order to
make the exchanges as fast as possible. Of course this offers no guarantee on
the functionality, as it may break at any other place. But if it works via
HAProxy, it will work as fast as possible. This option should never be used
by default, and should never be used at all unless such a buggy application
is discovered. The impact of using this option is an increase of bandwidth
usage and CPU usage, which may significantly lower performance in high
latency environments.
This change should be backported to 1.4 since the first report of such a
misuse was in 1.4. Next patch will also be needed.
Since IPv6 is a different type than IPv4, the pattern fetch functions
src6 and dst6 were added. IPv6 stick-tables can also fetch IPv4 addresses
with src and dst. In this case, the IPv4 addresses are mapped to their
IPv6 counterpart, according to RFC 4291.
Johannes Smith reported some wrong retries count in logs associated with bad
requests. The cause was that the conn_retries field in the stream interface
was only initialized when attempting to connect, but is used when logging,
possibly with an uninitialized value holding last connection's conn_retries.
This could have been avoided by making use of a stream interface initializer.
This bug is 1.5-specific.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
This one has been removed and is now totally superseded by ->target.
To get the server, one must use target_srv(&s->target) instead of
s->srv now.
The function ensures that non-server targets still return NULL.
s->prev_srv is used by assign_server() only, but all code paths leading
to it now take s->prev_srv from the existing s->srv. So assign_server()
can do that copy into its own stack.
If at one point a different srv is needed, we still have a copy of the
last server on which we failed a connection attempt in s->target.
When dealing with HTTP keep-alive, we'll have to know if we can reuse
an existing connection. For that, we'll have to check if the current
connection was made on the exact same target (referenced in the stream
interface).
Thus, we need to first assign the next target to the session, then
copy it to the stream interface upon connect(). Later we'll check for
equivalence between those two operations.
Now that we have the target pointer and type in the stream interface,
we don't need the applet.handler pointer anymore. That makes the code
somewhat cleaner because we know we're dealing with an applet by checking
its type instead of checking the pointer is not null.
When doing a connect() on a stream interface, some information is needed
from the server and from the backend. In some situations, we don't have
a server and only a backend (eg: peers). In other cases, we know we have
an applet and we don't want to connect to anything, but we'd still like
to have the info about the applet being used.
For this, we now store a pointer to the "target" into the stream interface.
The target describes what's on the other side before trying to connect. It
can be a server, a proxy or an applet for now. Later we'll probably have
descriptors for multiple-stage chains so that the final information may
still be found.
This will help removing many specific cases in the code. It already made
it possible to remove the "srv" and "be" parameters to tcpv4_connect_server().
I/O handlers are still delicate to manipulate. They have no type, they're
just raw functions which have no knowledge of themselves. Let's have them
declared as applets once for all. That way we can have multiple applets
share the same handler functions and we can store their names there. When
we later need to add more parameters (eg: usage stats), we'll be able to
do so in the applets themselves.
The CLI functions has been prefixed with "cli" instead of "stats" as it's
clearly what is going on there.
The applet descriptor in the stream interface should get all the applet
specific data (st0, ...) but this will be done in the next patch so that
we don't pollute this one too much.
When a connection error is encountered on a server and the server's
connection pool is full, pending connections are not woken up because
the current connection is still accounted for on the server, so it
still appears full. This becomes visible on a server which has
"maxconn 1" because the pending connections will only be able to
expire in the queue.
Now we take care of releasing our current connection before trying to
offer it to another pending request, so that the server can accept a
next connection.
This patch should be backported to 1.4.
HTTP pipelining currently needs to monitor the response buffer to wait
for some free space to be able to send a response. It was not possible
for the HTTP analyser to be called based on response buffer activity.
Now we introduce a new buffer flag BF_WAKE_ONCE which is set when the
HTTP request analyser is set on the response buffer and some activity
is detected. This is not clean at all but once of the only ways to fix
the issue before we make it possible to register events for analysers.
Also it appeared that one realign condition did not cover all cases.
Analysers were re-evaluated when some flags were still present in the
buffers, even if they had not changed since previous pass, resulting
in a waste of CPU cycles.
Ensuring that the flags have changed has saved some useless calls :
function min calls per session (before -> after)
http_request_forward_body 5 -> 4
http_response_forward_body 3 -> 2
http_sync_req_state 10 -> 8
http_sync_res_state 8 -> 6
http_resync_states 8 -> 6
The stream_sock's accept() used to close the FD upon error, but this
was also sometimes performed by the frontend's accept() called via the
session's accept(). Those interlaced calls were also responsible for the
spaghetti-looking error unrolling code in session.c and stream_sock.c.
Now the frontend must not close the FD anymore, the session is responsible
for that. It also takes care of just closing the FD or also removing from
the FD lists, depending on its state. The socket-level accept() does not
have to care about that anymore.
Some Alert() messages were remaining in the accept() path, which they
would have no chance to be detected. Remove some of them (the impossible
ones) and replace the relevant ones with send_log() so that the admin
has a chance to catch them.
Enhance pattern convs and fetch argument parsing, now fetchs and convs callbacks used typed args.
Add more details on error messages on parsing pattern expression function.
Update existing pattern convs and fetchs to new proto.
Create stick table key type "binary".
Manage Truncation and padding if pattern's fetch-converted result don't match table key size.
If a read shutdown is encountered on the first packet of a connection
right after the data and the last analyser is unplugged at the same
time, then that last data chunk may never be forwarded. In practice,
right now it cannot happen on requests due to the way they're scheduled,
nor can it happen on responses due to the way their analysers work.
But this behaviour has been observed with new response analysers being
developped.
The reason is that when the read shutdown is encountered and an analyser
is present, data cannot be forwarded but the BF_SHUTW_NOW flag is set.
After that, the analyser gets called and unplugs itself, hoping that
process_session() will automatically forward the data. This does not
happen due to BF_SHUTW_NOW.
Simply removing the test on this flag is not enough because then aborted
requests still get forwarded, due to the forwarding code undoing the
abort.
The solution here consists in checking BF_SHUTR_NOW instead of BF_SHUTW_NOW.
BF_SHUTR_NOW is only set on aborts and remains set until ->shutr() is called.
This is enough to catch recent aborts but not prevent forwarding in other
cases. Maybe a new special buffer flag "BF_ABORT" might be desirable in the
future.
This patch does not need to be backported because older versions don't
have the analyser which make the problem appear.
This counter is incremented for each incoming connection and each active
listener, and is used to prevent haproxy from stopping upon SIGUSR1. It
will thus be possible for some tasks in increment this counter in order
to prevent haproxy from dying until they have completed their job.
The assumption that there was a 1:1 relation between tracked counters and
the frontend/backend role was wrong. It is perfectly possible to track the
track-fe-counters from the backend and the track-be-counters from the
frontend. Thus, in order to reduce confusion, let's remove this useless
{fe,be} reference and simply use {1,2} instead. The keywords have also been
renamed in order to limit confusion. The ACL rule action now becomes
"track-sc{1,2}". The ACLs are now "sc{1,2}_*" instead of "trk{fe,be}_*".
That means that we can reasonably document "sc1" and "sc2" (sticky counters
1 and 2) as sort of patterns that are available during the whole session's
life and use them just like any other pattern.
Having a single tracking pointer for both frontend and backend counters
does not work. Instead let's have one for each. The keyword has changed
to "track-be-counters" and "track-fe-counters", and the ACL "trk_*"
changed to "trkfe_*" and "trkbe_*".
This patch adds support for the following session counters :
- http_req_cnt : HTTP request count
- http_req_rate: HTTP request rate
- http_err_cnt : HTTP request error count
- http_err_rate: HTTP request error rate
The equivalent ACLs have been added to check the tracked counters
for the current session or the counters of the current source.
This counter may be used to track anything. Two sets of ACLs are available
to manage it, one gets its value, and the other one increments its value
and returns it. In the second case, the entry is created if it did not
exist.
Thus it is possible for example to mark a source as being an abuser and
to keep it marked as long as it does not wait for the entry to expire :
# The rules below use gpc0 to track abusers, and reject them if
# a source has been marked as such. The track-counters statement
# automatically refreshes the entry which will not expire until a
# 1-minute silence is respected from the source. The second rule
# evaluates the second part if the first one is true, so GPC0 will
# be increased once the conn_rate is above 100/5s.
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request track-counters src
tcp-request reject if { trk_get_gpc0 gt 0 }
tcp-request reject if { trk_conn_rate gt 100 } { trk_inc_gpc0 gt 0}
Alternatively, it is possible to let the entry expire even in presence of
traffic by swapping the check for gpc0 and the track-counters statement :
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request reject if { src_get_gpc0 gt 0 }
tcp-request track-counters src
tcp-request reject if { trk_conn_rate gt 100 } { trk_inc_gpc0 gt 0}
It is also possible not to track counters at all, but entry lookups will
then be performed more often :
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request reject if { src_get_gpc0 gt 0 }
tcp-request reject if { src_conn_rate gt 100 } { src_inc_gpc0 gt 0}
The '0' at the end of the counter name is there because if we find that more
counters may be useful, other ones will be added.
This function looks up a key, updates its expiration date, or creates
it if it was not found. acl_fetch_src_updt_conn_cnt() was updated to
make use of it.
These counters maintain incoming and outgoing byte rates in a stick-table,
over a period which is defined in the configuration (2 ms to 24 days).
They can be used to detect service abuse and enforce a certain bandwidth
limits per source address for instance, and block if the rate is passed
over. Since 32-bit counters are used to compute the rates, it is important
not to use too long periods so that we don't have to deal with rates above
4 GB per period.
Example :
# block if more than 5 Megs retrieved in 30 seconds from a source.
stick-table type ip size 200k expire 1m store bytes_out_rate(30s)
tcp-request track-counters src
tcp-request reject if { trk_bytes_out_rate gt 5000000 }
# cause a 15 seconds pause to requests from sources in excess of 2 megs/30s
tcp-request inspect-delay 15s
tcp-request content accept if { trk_bytes_out_rate gt 2000000 } WAIT_END
These counters maintain incoming connection rates and session rates
in a stick-table, over a period which is defined in the configuration
(2 ms to 24 days). They can be used to detect service abuse and
enforce a certain accept rate per source address for instance, and
block if the rate is passed over.
Example :
# block if more than 50 requests per 5 seconds from a source.
stick-table type ip size 200k expire 1m store conn_rate(5s),sess_rate(5s)
tcp-request track-counters src
tcp-request reject if { trk_conn_rate gt 50 }
# cause a 3 seconds pause to requests from sources in excess of 20 requests/5s
tcp-request inspect-delay 3s
tcp-request content accept if { trk_sess_rate gt 20 } WAIT_END
Most of the time we'll want to check the connection count of the
criterion we're currently tracking. So instead of duplicating the
src* tests, let's add trk_conn_cnt to report the total number of
connections from the stick table entry currently being tracked.
A nice part of the code was factored, and we should do the same
for the other criteria.
The new "bytes_in_cnt" and "bytes_out_cnt" session counters have been
added. They're automatically updated when session counters are updated.
They can be matched with the "src_kbytes_in" and "src_kbytes_out" ACLs
which apply to the volume per source address. This can be used to deny
access to service abusers.
The new "conn_cur" session counter has been added. It is automatically
updated upon "track XXX" directives, and the entry is touched at the
moment we increment the value so that we don't consider further counter
updates as real updates, otherwise we would end up updating upon completion,
which may not be desired. Probably that some other event counters (eg: HTTP
requests) will have to be updated upon each event though.
This counter can be matched against current session's source address using
the "src_conn_cur" ACL.
It was not normal to have counter fetches in proto_tcp.c. The only
reason was that the key based on the source address was fetched there,
but now we have split the key extraction and data processing, we must
move that to a more appropriate place. Session seems OK since the
counters are all manipulated from here.
Also, since we're precisely counting number of connections with these
ACLs, we rename them src_conn_cnt and src_updt_conn_cnt. This is not
a problem right now since no version was emitted with these keywords.
This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
Sometimes it's necessary to be able to perform some "layer 6" analysis
in the backend. TCP request rules were not available till now, although
documented in the diagram. Enable them in backend now.
Since the BF_READ_ATTACHED bug was fixed, a new issue surfaced. When
a connection closes on the return path in tunnel mode while the request
input is already closed, the request analyser which is waiting for a
state change never gets woken up so it never closes the request output.
This causes stuck sessions to remain indefinitely.
One way to reliably reproduce the issue is the following (note that the
client expects a keep-alive but not the server) :
server: printf "HTTP/1.0 303\r\n\r\n" | nc -lp8080
client: printf "GET / HTTP/1.1\r\n\r\n" | nc 127.1 2500
The reason for the issue is that we don't wake the analysers up on
stream interface state changes. So the least intrusive and most reliable
thing to do is to consider stream interface state changes to call the
analysers.
We just need to remember what state each series of analysers have seen
and check for the differences. In practice, that works.
A later improvement later could consist in being able to let analysers
state what they're interested to monitor :
- left SI's state
- right SI's state
- request buffer flags
- response buffer flags
That could help having only one set of analysers and call them once
status changes.
This will be used when an I/O handler running in a stream interface
needs to establish a connection somewhere. We want the session
processor to evaluate both I/O handlers, depending on which side has
one. Doing so also requires that stream_int_update_embedded() wakes
the session up only when the other side is established or has closed,
for instance in order to handle connection errors without looping
indefinitely during the connection setup time.
The session processor still relies on BF_READ_ATTACHED being set,
though we must do whatever is required to remove this dependency.
When a connection is closed on a stream interface, some iohandlers
will need to be informed in order to release some resources. This
normally happens upon a shutr+shutw. It is the equivalent of the
fd_delete() call which is done for real sockets, except that this
time we release internal resources.
It can also be used with real sockets because it does not cost
anything else and might one day be useful.
(cherry picked from commit 61ba936e6858dfcf9964d25870726621d8188fb9)
[ note: the bug was finally not present in 1.5-dev but at least we
have to reset store_count to be compatible with 1.4 ]
Commit d6e9e3b5e320b957e6c491bd92d91afad30ba638 caused recently created
entries to be removed as soon as they were created, breaking stickiness.
It is not clear whether a use-after-free was possible or not in this case.
This bug was reported by Ben Congleton and narrowed down by Herv Commowick,
both of whom also tested the fix. Thanks to them !
When an entry already exists, we just need to update its expiration
timer. Let's have a dedicated function for that instead of spreading
open code everywhere.
This change also ensures that an update of an existing sticky session
really leads to an update of its expiration timer, which was apparently
not the case till now. This point needs to be checked in 1.4.
Till now sticky sessions only held server IDs. Now there are other
data types so it is not acceptable anymore to overwrite the server ID
when writing something. The server ID must then only be written from
the caller when appropriate. Doing this has also led to separate
lookup and storage.
pattern.c depended on stick_table while in fact it should be the opposite.
So we move from pattern.c everything related to stick_tables and invert the
dependency. That way the code becomes more logical and intuitive.
Right now we're only able to store a server ID in a sticky session.
The goal is to be able to store anything whose size is known at startup
time. For this, we store the extra data before the stksess pointer,
using a negative offset. It will then be easy to cumulate multiple
data provided they each have their own offset.
The frontend's connection was accounted for once the session was
instanciated. This was problematic because the early ACLs weren't
able to correctly account for the number of concurrent connections.
Now we count the connection once it is assigned to the frontend.
It also brings the nice advantage of being more symmetrical, because
the stream_sock's accept() does not have to account for that anymore,
only the session's accept() does.
Now we're able to reject connections very early, so we need to use a
different counter for the connections that are received and the ones
that are accepted and converted into sessions, so that the rate limits
can still apply to the accepted ones. The session rate must still be
used to compute the rate limit, so that we can reject undesired traffic
without affecting the rate.
A new function session_accept() is now called from the lower layer to
instanciate a new session. Once the session is instanciated, the upper
layer's frontent_accept() is called. This one can be service-dependant.
That way, we have a 3-phase accept() sequence :
1) protocol-specific, session-less accept(), which is pointed to by
the listener. It defaults to the generic stream_sock_accept().
2) session_accept() which relies on a frontend but not necessarily
for use in a proxy (eg: stats or any future service).
3) frontend_accept() which performs the accept for the service
offerred by the frontend. It defaults to frontend_accept() which
is really what is used by a proxy.
The TCP/HTTP proxies have been moved to this mode so that we can now rely on
frontend_accept() for any type of session initialization relying on a frontend.
The next step will be to convert the stats to use the same system for the stats.
The conn_retries attribute is now assigned when switching from SI_ST_INI
to SI_ST_REQ. This eliminates one of the last dependencies on the backend
in the frontend's accept() function.
The conn_retries still lies in the session and its initialization depends
on the backend when it may not yet be known. Let's first move it to the
stream interface.
It was particularly embarrassing that the server timeout was assigned
to buffers during an accept() just to be potentially changed later in
case of a use_backend rule. The frontend side has nothing to do with
server timeouts.
Now we initialize them right after the connect() succeeds. Later this
should change for a unique stream-interface timeout setting only.
Calling sess_establish() upon a successful connect() was essential, but
it was not clearly stated whether it was necessary for an access to an
I/O handler or not. While it would be desired, having it automatically
add the response analyzers is quite a problem, and it breaks HTTP stats.
The solution is thus not to call it for now and to perform the few response
initializations as needed.
For the long term, we need to find a way to specify the analyzers to install
during a stream_int_register_handler() if any.
If a "stick store-request" rule is present, an entry is preallocated during
the request. However, if there is no response due to an error or to a redir
mode server, we never release it.
The BF_READ_ATTACHED flag was created to wake analysers once after
a connection was established. It turns out that this flag is never
cleared once set, so even if there is no event, some analysers are
still evaluated for no reason.
The bug was introduced with commit ea38854d34.
It may cause slightly increased CPU usages during data transfers, maybe
even quite noticeable once when transferring transfer-encoded data,
due to the fact that the request analysers are being checked for every
chunk.
This fix must be backported in 1.4 after all non-reg tests have been
completed.
This is used to disable persistence depending on some conditions (for
example using an ACL matching static files or a specific User-Agent).
You can see it as a complement to "force-persist".
In the configuration file, the force-persist/ignore-persist declaration
order define the rules priority.
Used with the "appsesion" keyword, it can also help reducing memory usage,
as the session won't be hashed the persistence is ignored.
The following patch fixed an issue but brought another one :
296897 [MEDIUM] connect to servers even when the input has already been closed
The new issue is that when a connection is inspected and aborted using
TCP inspect rules, now it is sent to the server before being closed. So
that test is not satisfying. A probably better way is not to prevent a
connection from establishing if only BF_SHUTW_NOW is set but BF_SHUTW
is not. That way, the BF_SHUTW flag is not set if the request has any
data pending, which still fixes the stats issue, but does not let any
empty connection pass through.
Also, as a safety measure, we extend buffer_abort() to automatically
disable the BF_AUTO_CONNECT flag. While it appears to always be OK,
it is by pure luck, so better safe than sorry.
The BF_AUTO_CLOSE flag prevented a connection from establishing on
a server if the other side's input channel was already closed. This
is wrong because there may be pending data to be sent.
This was causing an issue with stats, as noticed and reported by
Cyril Bont. Since the stats are now handled as a server, sometimes
concurrent accesses were causing one of the connections to send the
shutdown(write) before the connection to the stats function was
established, which aborted it early.
This fix causes the BF_AUTO_CLOSE flag to be checked only when the
connection on the outgoing stream interface has reached an established
state. That way we're still able to connect, send the request then
close.
This duplicate test should have been removed with the loop rework but was forgotten.
It was harmless, but disassembly shows that it prevents gcc from correctly optimizing
the loop.
Often we need to understand why some transfers were aborted or what
constitutes server response errors. With those two counters, it is
now possible to detect an unexpected transfer abort during a data
phase (eg: too short HTTP response), and to know what part of the
server response errors may in fact be assigned to aborted transfers.
Some people have reported seeing "SL" flags in their logs quite often while
this should never happen. The reason was that then a server error is detected,
we close the connection to that server and when we decide what state we were
in, we see the connection is closed, and deduce it was the last data transfer,
which is wrong. We should report DATA if the previous state was an established
state, which this patch does.
Now logs correctly report "SD" and not "SL" when a server resets a connection
before the end of the transfer.
It is wrong to merge FE and BE stats for a proxy because when we consult a
BE's stats, it reflects the FE's stats eventhough the BE has received no
traffic. The most common example happens with listen instances, where the
backend gets credited for all the trafic even when a use_backend rule makes
use of another backend.
This is used to force access to down servers for some requests. This
is useful when validating that a change on a server correctly works
before enabling the server again.
The initial code's intention was to loop on the analysers as long
as an analyser is added by another one. [This code was wrong due to
the while(0) which breaks even on a continue statement, but the
initial intention must be changed too]. In fact we should limit the
number of times we loop on analysers in order to limit latency.
Using maxpollevents as a limit makes sense since this tunable is
used for the exact same purposes. We may add another tunable later
if that ever makes sense, so it's very unlikely.
That patch was incorrect because under some circumstances, the
capture memory could be freed by session_free() and then again
by http_end_txn(), causing a double free and an eventual segfault.
The pool use count was also reported wrong due to this bug.
The cleanup code was removed from session_free() to remain only
in http_end_txn().
Several HTTP analysers used to set those flags to values that
were useful but without considering the possibility that they
were not called again to clean what they did. First, replace
direct flag manipulation with more explicit macros. Second,
enforce a rule stating that any buffer which changes one of
these flags from the default must restore it after completion,
so that other analysers see correct flags.
With both this fix and the previous one about analyser bits,
we should not see any more stuck sessions.
A request analyser may very well be added while processing a response
(eg: end of an HTTP keep-alive response). It's very dangerous to only
rely on flags that ought to change in order to loop back, so let's
correctly detect a possible new analyser addition instead of guessing.
With the introduction of keep-alive, we have created situations
where an analyser can add other analysers to the current list,
which are behind it, which have already been processed once, and
which are needed immediately because without them there will be
no more I/O activity. This is typically the case for enabling
reading of a new request after preparing for a new request.
Instead of creating specific cases for some analysers (there was
already one such before), we now use a little bit of algorithmics
to create an ordered bit chain supporting priorities and fast
operations.
Another advantage of this new construction is that it's not a
real loop anymore, so if an analyser is unknown, it will not
loop but just ignore it.
Note that it is easy to skip multiple analysers at once now in
order to speed up the checking a bit. Some test code has shown
a minor gain though.
This change has been carefully re-read and has no direct reason
of causing a regression. However it has been tagged "major"
because the fact that it runs the analysers correctly might
trigger an old sleeping bug somewhere in one of the analysers.
Doing this helps us flush the system buffers from all unread data. This
avoids having orphans when clients suddenly get off the net without
reading their entire response.
The "forceclose" option used to close the output channel to the
server once it started to respond. While this happened to work with
most servers, some of them considered this as a connection abort and
immediately stopped responding.
Now that we're aware of the end of a request and response, we're able
to trivially handle this option and properly close both sides when the
server's response is complete.
During this change it appeared that forwarding could be allowed when
the BF_SHUTW_NOW flag was set on a buffer, which obviously is not
acceptable and was causing some trouble. This has been fixed too and
is the reason for the MEDIUM status on this patch.
The body parser will be used in close and keep-alive modes. It follows
the stream to keep in sync with both the request and the response message.
Both chunked transfer-coding and content-length are supported according to
RFC2616.
The multipart/byterange encoding has not yet been implemented and if not
seconded by any of the two other ones, will be forwarded till the close,
as requested by the specification.
Both the request and the response analysers converge into an HTTP_MSG_DONE
state where it will be possible to force a close (option forceclose) or to
restart with a fresh new transaction and maintain keep-alive.
This change is important. All tests are OK but any possible behaviour
change with "option httpclose" might find its root here.
This code really belongs to the http part since it's transaction-specific.
This will also make it easier to later reinitialize a transaction in order
to support keepalive.
We used to apply a limit to each buffer's size in order to leave
some room to rewrite headers, then we used to remove this limit
once the session switched to a data state.
Proceeding that way becomes a problem with keepalive because we
have to know when to stop reading too much data into the buffer
so that we can leave some room again to process next requests.
The principle we adopt here consists in only relying on to_forward+send_max.
Indeed, both of those data define how many bytes will leave the buffer.
So as long as their sum is larger than maxrewrite, we can safely
fill the buffers. If they are smaller, then we refrain from filling
the buffer. This means that we won't risk to fill buffers when
reading last data chunk followed by a POST request and its contents.
The only impact identified so far is that we must ensure that the
BF_FULL flag is correctly dropped when starting to forward. Right
now this is OK because nobody inflates to_forward without using
buffer_forward().
Implement decreasing health based on observing communication between
HAProxy and servers.
Changes in this version 2:
- documentation
- close race between a started check and health analysis event
- don't force fastinter if it is not set
- better names for options
- layer4 support
Changes in this version 3:
- add stats
- port to the current 1.4 tree
This patch extends and corrects the functionality introduced by
"Collect & provide http response codes received from servers":
- responses are now also accounted for frontends
- backend's and frontend's counters are incremented based
on responses sent to client, not received from servers
The code part which waits for an HTTP response has been extracted
from the old function. We now have two analysers and the second one
may re-enable the first one when an 1xx response is encountered.
This has been tested and works.
The calls to stream_int_return() that were remaining in the wait
analyser have been converted to stream_int_retnclose().
This patch has 2 goals :
1. I wanted to test the appsession feature with a small PHP code,
using PHPSESSID. The problem is that when PHP gets an unknown session
id, it creates a new one with this ID. So, when sending an unknown
session to PHP, persistance is broken : haproxy won't see any new
cookie in the response and will never attach this session to a
specific server.
This also happens when you restart haproxy : the internal hash becomes
empty and all sessions loose their persistance (load balancing the
requests on all backend servers, creating a new session on each one).
For a user, it's like the service is unusable.
The patch modifies the code to make haproxy also learn the persistance
from the client : if no session is sent from the server, then the
session id found in the client part (using the URI or the client cookie)
is used to associated the server that gave the response.
As it's probably not a feature usable in all cases, I added an option
to enable it (by default it's disabled). The syntax of appsession becomes :
appsession <cookie> len <length> timeout <holdtime> [request-learn]
This helps haproxy repair the persistance (with the risk of losing its
session at the next request, as the user will probably not be load
balanced to the same server the first time).
2. This patch also tries to reduce the memory usage.
Here is a little example to explain the current behaviour :
- Take a Tomcat server where /session.jsp is valid.
- Send a request using a cookie with an unknown value AND a path
parameter with another unknown value :
curl -b "JSESSIONID=12345678901234567890123456789012" http://<haproxy>/session.jsp;jsessionid=00000000000000000000000000000001
(I know, it's unexpected to have a request like that on a live service)
Here, haproxy finds the URI session ID and stores it in its internal
hash (with no server associated). But it also finds the cookie session
ID and stores it again.
- As a result, session.jsp sends a new session ID also stored in the
internal hash, with a server associated.
=> For 1 request, haproxy has stored 3 entries, with only 1 which will be usable
The patch modifies the behaviour to store only 1 entry (maximum).
This patch allows to collect & provide separate statistics for each socket.
It can be very useful if you would like to distinguish between traffic
generate by local and remote users or between different types of remote
clients (peerings, domestic, foreign).
Currently no "Session rate" is supported, but adding it should be possible
if we found it useful.
We can get rid of the stats analyser by moving all the stats code
to a stream interface applet. Above being cleaner, it provides new
advantages such as the ability to process requests and responses
from the same function and work only with simple state machines.
There's no need for any hijack hack anymore.
The direct advantage for the user are the interactive mode and the
ability to chain several commands delimited by a semi-colon. Now if
the user types "prompt", he gets a prompt from which he can send
as many requests as he wants. All outputs are terminated by a
blank line followed by a new prompt, so this can be used from
external tools too.
The code is not very clean, it needs some rework, but some part
of the dirty parts are due to the remnants of the hijack mode used
in the old functions we call.
The old AN_REQ_STATS_SOCK analyser flag is now unused and has been
removed.
Currently, it's up to process_session() to call the internal tasks
if any are associated to the task being processed. If such a task
is referenced, we don't use ->update() in process_session(), but
only ->iohandler(), which itself is free to use ->update() to
complete its work.
It it also important to understand that an I/O handler may wake the
task up again, for instance because it tries to send data to the
other stream interface, which itself will wake the task up. So
after returning from ->iohandler(), we must check if the task has
been sent back to the runqueue, and if so, immediately return.
We had to add a new stream_interface flag : SI_FL_DONT_WAKE. This flag
is used to indicate that a stream interface is being updated and that
no wake up should be sent to its owner. This will be required for tasks
embedded into stream interfaces. Otherwise, we could have the
owner task send wakeups to itself during status updates, thus
preventing the state from converging. As long as a stream_interface's
status is being monitored and adjusted, there is no reason to wake it
up again, as we know its changes will be seen and considered.
In TCP, we don't want to forward chunks of data, we want to forward
indefinitely. This patch introduces a special value for the amount
of data to be forwarded. When buffer_forward() is called with
BUF_INFINITE_FORWARD, it configures the buffer to never stop
forwarding until the end.
An abort during a connect would go to the SI_ST_CLO state without
the buffers shut. This was causing some sessions to never end if
they would abort before the connect request was initiated. This
bug has been introduced after 1.4-dev2.
The doc has been extended to reflect that too.
The BF_EMPTY flag was once used to indicate an empty buffer. However,
it was used half the time as meaning the buffer is empty for the reader,
and half the time as meaning there is nothing left to send.
"nothing to send" is only indicated by "->send_max=0 && !pipe". Once
we fix this, we discover that the flag is not used anymore. So the
flags has been renamed BF_OUT_EMPTY and means exactly the condition
above, ie, there is nothing to send.
Doing so has allowed us to remove some unused tests for emptiness,
but also to uncover a certain amount of situations where the flag
was not correctly set or tested.
The BF_WRITE_ENA buffer flag became very complex to deal with, because
it was used to :
- enable automatic connection
- enable close forwarding
- enable data forwarding
The last point was not very true anymore since we introduced ->send_max,
but still the test remained everywhere. This was causing issues such as
impossibility to connect without forwarding data, impossibility to prevent
closing when data was forwarded, etc...
This patch clarifies the situation by getting rid of this multi-purpose
flag and replacing it with :
- data forwarding based only on ->send_max || ->pipe ;
- a new BF_AUTO_CONNECT flag to allow automatic connection and only
that ;
- ability to perform an automatic connection when ->send_max or ->pipe
indicate that data is waiting to leave the buffer ;
- a new BF_AUTO_CLOSE flag to let the producer automatically set the
BF_SHUTW_NOW flag when it gets a BF_SHUTR.
During this cleanup, it was discovered that some tests were performed
twice, or that the BF_HIJACK flag was still tested, which is not needed
anymore since ->send_max replcaed it. These places have been fixed too.
These cleanups have also revealed a few areas where the other flags
such as BF_EMPTY are not cleanly used. This will be an opportunity for
a second patch.
This flag was incorrectly used as meaning "close immediately",
while it needs to say "close ASAP". ASAP here means when unsent
data pending in the buffer are sent. This helps cleaning up some
dirty tricks where the buffer output was checking the BF_SHUTR
flag combined with EMPTY and other such things. Now we have a
clearly defined semantics :
- producer sets SHUTR and *may* set SHUTW_NOW if WRITE_ENA is
set, otherwise leave it to the session processor to set it.
- consumer only checks SHUTW_NOW to decide whether or not to
call shutw().
This also induced very minor changes at some locations which were
not protected against buffer changes while the SHUTW_NOW flag was
set. Now we prevent send_max from changing when the flag is set.
Several tests have been run without any unexpected behaviour detected.
Some more cleanups are needed, as it clearly appears that some tests
could be removed with stricter semantics.
Tarpit was broken by recent splitting of analysers. It would still
let the connection go to the server due to a missing buffer_write_dis().
Also, it was performed too late (after content switching rules).
We used to call stream_sock_data_finish() directly at the end of
a session update, but if we want to support non-socket interfaces,
we need to have this function configurable. Now we access it via
->update().
The new tune.bufsize and tune.maxrewrite global directives allow one to
change the buffer size and the maxrewrite size. Right now, setting bufsize
too low will block stats sockets which will not be able to write at all.
An error checking must be added to buffer_write_chunk() so that if it
cannot write its message to an empty buffer, it causes the caller to abort.
The first step towards dynamic buffer size consists in removing
all static definitions of the buffer size. Instead, we store a
buffer's size in itself. Right now they're all preinitialized
to BUFSIZE, but we will change that.
sess_establish() used to resort to protocol-specific guesses
in order to set rep->analysers. This is no longer needed as it
gets set from the frontend and the backend as a copy of what
was defined in the configuration.
The remains of the stats socket code has nothing to do in proto_uxst
anymore and must move to dumpstats. The code is much cleaner and more
structured. It was also an opportunity to rename AN_REQ_UNIX_STATS
as AN_REQ_STATS_SOCK as the stats socket is no longer unix-specific
either.
The last item refering to stats in proto_uxst is the setting of the
task's nice value which should in fact come from the listener.
process_session() is now ready to handle unix stats sockets. This
first step works and old code has not been removed. A cleanup is
required. The stats handler is not unix socket-centric anymore and
should move to dumpstats.c.
When a stream interface has no connect() function, it means it is
immediately connected, so we don't need any connection request.
This will be used with unix sockets.
In order to merge the unix session handling code, we have to maintain
the number of per-listener connections in the session. This was only
performed for unix sockets till now.
This Linux-specific option was never really used in production and
has since been superseded by new splicing options brought by recent
Linux kernels.
It caused several particular cases in the code because the kernel
would take care of the session without haproxy being able to do
anything on it, which became hard to handle in the new architecture.
Let's simply get rid of it now that there is a replacement available.
The new statement "persist rdp-cookie" enables RDP cookie
persistence. The RDP cookie is then extracted from the RDP
protocol, and compared against available servers. If a server
matches the RDP cookie, then it gets the connection.
In case of switching from TCP to HTTP, we want the HTTP request timeout
to be properly initialized. For this, we have to jump to the analyser
without breaking out of the loop nor waiting for incoming data. The way
it is done right now is not particularly clean but it works.
A cleaner method might involve pushing function pointers into a circular
list.
The HTTP processing has been splitted into 7 steps, one of which
is not anymore HTTP-specific (content-switching). That way, it
becomes possible to use "use_backend" rules in TCP mode. A new
"use_server" directive should follow soon.
Some stream analysers might become generic enough to be called
for several bits. So we cannot have the analyser bit hard coded
into the analyser itself. Let's make the caller inform the callee.
We want to split several steps in HTTP processing so that
we can call individual analysers depending on what processing
we want to perform. The first step consists in splitting the
part that waits for a request from the rest.
The splice code did not consider compatibility between both ends
of the connection. Now we set different capabilities on each
stream interface, depending on what the protocol can splice to/from.
Right now, only TCP is supported. Thanks to this, we're now able to
automatically detect when splice() is not implemented and automatically
disable it on one end instead of reporting errors to the upper layer.
It will soon be necessary to support permanent analysers (eg: HTTP in
keep-alive mode). We first have to slightly rework the call to the
request analysers so that we don't force ->analysers to be 0 before
forwarding data.
Buffer errors (timeouts and I/O errors) were handled at two places,
just after the analysers and after again.
Now that the timeout detection has moved, it has become easier to
handle those errors.
This has also made it possible for the request and response analysers
to be processed together as a down-up event, and all the up-down I/O
updates to be processed afterwards, which is exactly what we're looking
for. Interestingly this has reduced the number of iterations of
(stream_int, req_resp) from (5,6,5) to (5,5,4).
Several tests have been run without any issue found.
It's useless to check for buffer timeouts every time we call
process_session() because we already control when we set the flag. So
let's check them at the precise moment where the flag is set.
We want to be able to keep information about errors and timeouts
as long as possible in the buffer. Let's not clear these flags
anymore and keep them static. This does not seem to cause any
trouble, though a finer review might be wise.
The stream_interface timeout was not reset upon a connect success or
error, leading to busy loops when requeuing tasks in the past.
Thanks to Bart Bobrowski for reporting the issue.
While processing the session, we used to resync the FSMs when buffer
flags changed. But since BF_KERN_SPLICING and BF_READ_DONTWAIT were
introduced, sometimes we could resync after they were set, which is
not what we want. This was because there were some old checks left
which did not mask changes with BF_MASK_STATIC before checking.
In order to get termination flags properly updated, the session was
relying a bit too much on http_return_srv_error() which is http-centric.
A generic srv_error function was implemented in the session in order to
catch all connection abort situations. It was then noticed that a request
abort during a connection attempt was not reported, which is now fixed.
Read and write errors/timeouts were not logged either. It was necessary
to add those tests at 4 new locations.
Now it looks like everything is correctly logged. Most likely some error
checking code could now be removed from some analysers.
The forwarding condition was not very clear. We would only enable
forwarding when send_max is zero, and we would only splice when no
analyser is installed. In fact we want to enable forward when there
is no analyser and we want to splice at soon as there is data to
forward, regardless of the analysers.
In process_session(), we used to re-run through all the evaluation
loop when only the response had changed. Now we carefully check in
this order :
- changes to the stream interfaces (only SI_ST_DIS)
- changes to the request buffer flags
- changes to the response buffer flags
And we branch to the appropriate section. This saves significant
CPU cycles, which is important since process_session() is one of
the major CPU eaters.
The same changes have been applied to uxst_process_session().
Timers are unsigned and used as tree positions. Ticks are signed and
used as absolute date within current time frame. While the two are
normally equal (except zero), it's important not to confuse them in
the code as they are not interchangeable.
We add two inline functions to turn each one into the other.
The comments have also been moved to the proper location, as it was
not easy to understand what was a tick and what was a timer unit.
All the tasks callbacks had to requeue the task themselves, and update
a global timeout. This was not convenient at all. Now the API has been
simplified. The tasks callbacks only have to update their expire timer,
and return either a pointer to the task or NULL if the task has been
deleted. The scheduler will take care of requeuing the task at the
proper place in the wait queue.
term_trace was very useful while reworking the lower layers but has almost
completely been removed from every place it was referenced. Even the few
remaining ones were not accurate, so it's better to completely remove those
references and re-add them from scratch later if needed.
In pure TCP mode, there is no response analyser to switch the server-side
stream interface from INI to CLO when the output has been closed after an
abort. This caused sessions to remain indefinitely active when they were
aborted by the client during a TCP content analysis.
The proper action is to switch the stream interface to the CLO state from
INI when we have write enable and shutdown write.
With this change, all frontends, backends, and servers maintain a session
counter and a timer to compute a session rate over the last second. This
value will be very useful because it varies instantly and can be used to
check thresholds. This value is also reported in the stats in a new "rate"
column.
Commit 8a5c626e73 introduced the sessions
dump on the unix socket. This implementation is buggy because it may try
to link to the sessions list's head after the last session is removed
with a backref. Also, for the LIST_ISEMPTY test to succeed, we have to
proceed with LIST_INIT after LIST_DEL.
Setting "nosplice" in the global section will disable the use of TCP
splicing (both tcpsplice and linux 2.6 splice). The same will be
achieved using the "-dS" parameter on the command line.
Using pipe pools makes pipe management a lot easier. It also allows to
remove quite a bunch of #ifdefs in areas which depended on the presence
or not of support for kernel splicing.
The buffer now holds a pointer to a pipe structure which is always NULL
except if there are still data in the pipe. When it needs to use that
pipe, it dynamically allocates it from the pipe pool. When the data is
consumed, the pipe is immediately released.
That way, there is no need anymore to care about pipe closure upon
session termination, nor about pipe creation when trying to use
splice().
Another immediate advantage of this method is that it considerably
reduces the number of pipes needed to use splice(). Tests have shown
that even with 0.2 pipe per connection, almost all sessions can use
splice(), because the same pipe may be used by several consecutive
calls to splice().
This code provides support for linux 2.6 kernel splicing. This feature
appeared in kernel 2.6.25, but initial implementations were awkward and
buggy. A kernel >= 2.6.29-rc1 is recommended, as well as some optimization
patches.
Using pipes, this code is able to pass network data directly between
sockets. The pipes are a bit annoying to manage (fd creation, release,
...) but finally work quite well.
Preliminary tests show that on high bandwidths, there's a substantial
gain (approx +50%, only +20% with kernel workarounds for corruption
bugs). With 2000 concurrent connections, with Myricom NICs, haproxy
now more easily achieves 4.5 Gbps for 1 process and 6 Gbps for two
processes buffers. 8-9 Gbps are easily reached with smaller numbers
of connections.
We also try to splice out immediately after a splice in by making
profit from the new ability for a data producer to notify the
consumer that data are available. Doing this ensures that the
data are immediately transferred between sockets without latency,
and without having to re-poll. Performance on small packets has
considerably increased due to this method.
Earlier kernels return only one TCP segment at a time in non-blocking
splice-in mode, while newer return as many segments as may fit in the
pipe. To work around this limitation without hurting more recent kernels,
we try to collect as much data as possible, but we stop when we believe
we have read 16 segments, then we forward everything at once. It also
ensures that even upon shutdown or EAGAIN the data will be forwarded.
Some tricks were necessary because the splice() syscall does not make
a difference between missing data and a pipe full, it always returns
EAGAIN. The trick consists in stop polling in case of EAGAIN and a non
empty pipe.
The receiver waits for the buffer to be empty before using the pipe.
This is in order to avoid confusion between buffer data and pipe data.
The BF_EMPTY flag now covers the pipe too.
Right now the code is disabled by default. It needs to be built with
CONFIG_HAP_LINUX_SPLICE, and the instances intented to use splice()
must have "option splice-response" (or option splice-request) enabled.
It is probably desirable to keep a pool of pre-allocated pipes to
avoid having to create them for every session. This will be worked
on later.
Preliminary tests show very good results, even with the kernel
workaround causing one memcpy(). At 3000 connections, performance
has moved from 3.2 Gbps to 4.7 Gbps.
When CONFIG_HAP_LINUX_SPLICE is defined, the buffer structure will be
slightly enlarged to support information needed for kernel splicing
on Linux.
A first attempt consisted in putting this information into the stream
interface, but in the long term, it appeared really awkward. This
version puts the information into the buffer. The platform-dependant
part is conditionally added and will only enlarge the buffers when
compiled in.
One new flag has also been added to the buffers: BF_KERN_SPLICING.
It indicates that the application considers it is appropriate to
use splicing to forward remaining data.
