At a few places we're seeing some open-coding of the same function, likely
because it looks overkill for what it's supposed to do, due to extraneous
tests that are not needed (e.g. check of the backend's PR_CAP_BE etc).
Let's just remove all these superfluous tests and inline it so that it
feels more suitable for use everywhere it's needed.
The server lookup in sticking_rule_find_target() uses an open-coded tree
search while we have a function for this server_find_by_id(). In addition,
due to the way it's coded, the stick-table lock also covers the server
lookup by accident instead of being released earlier. This is not a real
problem though since such feature is rarely used nowadays.
Let's clean all this stuff by first retrieving the ID under the lock and
then looking up the corresponding server.
The code used to detect proxy id conflicts uses an open-coded lookup
in the ID tree which is not necessary since we already have functions
for this. Let's switch to that instead.
This function doesn't just look at the name but also the ID when the
argument starts with a '#'. So the name is not correct and explains
why this function is not always used when the name only is needed,
and why the list-based findserver() is used instead. So let's just
call the function "server_find()", and rename its generation-id based
cousin "server_find_unique()".
Let's just use the tree-based lookup instead of walking through the list.
This function is used to find duplicates in "track" statements and a few
such places, so it's important not to waste too much time on large setups.
findserver() used to check for duplicate server names. These are no
longer accepted in 3.3 so let's get rid of that test and simplify the
code. Note that the function still only uses the list instead of the
tree.
Released version 3.3-dev3 with the following main changes :
- BUG/MINOR: quic-be: Wrong retry_source_connection_id check
- MEDIUM: sink: change the sink mode type to PR_MODE_SYSLOG
- MEDIUM: server: move _srv_check_proxy_mode() checks from server init to finalize
- MINOR: server: move send-proxy* incompatibility check in _srv_check_proxy_mode()
- MINOR: mailers: warn if mailers are configured but not actually used
- BUG/MEDIUM: counters/server: fix server and proxy last_change mixup
- MEDIUM: server: add and use a separate last_change variable for internal use
- MEDIUM: proxy: add and use a separate last_change variable for internal use
- MINOR: counters: rename last_change counter to last_state_change
- MINOR: ssl: check TLS1.3 ciphersuites again in clienthello with recent AWS-LC
- BUG/MEDIUM: hlua: Forbid any L6/L7 sample fetche functions from lua services
- BUG/MEDIUM: mux-h2: Properly handle connection error during preface sending
- BUG/MINOR: jwt: Copy input and parameters in dedicated buffers in jwt_verify converter
- DOC: Fix 'jwt_verify' converter doc
- MINOR: jwt: Rename pkey to pubkey in jwt_cert_tree_entry struct
- MINOR: jwt: Remove unused parameter in convert_ecdsa_sig
- MAJOR: jwt: Allow certificate instead of public key in jwt_verify converter
- MINOR: ssl: Allow 'commit ssl cert' with no privkey
- MINOR: ssl: Prevent delete on certificate used by jwt_verify
- REGTESTS: jwt: Add test with actual certificate passed to jwt_verify
- REGTESTS: jwt: Test update of certificate used in jwt_verify
- DOC: 'jwt_verify' converter now supports certificates
- REGTESTS: restrict execution to a single thread group
- MINOR: ssl: Introduce new smp_client_hello_parse() function
- MEDIUM: stats: add persistent state to typed output format
- BUG/MINOR: httpclient: wrongly named httpproxy flag
- MINOR: ssl/ocsp: stop using the flags from the httpclient CLI
- MEDIUM: httpclient: split the CLI from the actual httpclient API
- MEDIUM: httpclient: implement a way to use directly htx data
- MINOR: httpclient/cli: add --htx option
- BUILD: dev/phash: remove the accidentally committed a.out file
- BUG/MINOR: ssl: crash in ssl_sock_io_cb() with SSL traces and idle connections
- BUILD/MEDIUM: deviceatlas: fix when installed in custom locations.
- DOC: deviceatlas build clarifications
- BUG/MINOR: ssl/ocsp: fix definition discrepancies with ocsp_update_init()
- MINOR: proto-tcp: Add support for TCP MD5 signature for listeners and servers
- BUILD: cfgparse-tcp: Add _GNU_SOURCE for TCP_MD5SIG_MAXKEYLEN
- BUG/MINOR: proto-tcp: Take care to initialized tcp_md5sig structure
- BUG/MINOR: http-act: Fix parsing of the expression argument for pause action
- MEDIUM: httpclient: add a Content-Length when the payload is known
- CLEANUP: ssl: Rename ssl_trace-t.h to ssl_trace.h
- MINOR: pattern: add a counter of added/freed patterns
- CI: set DEBUG_STRICT=2 for coverity scan
- CI: enable USE_QUIC=1 for OpenSSL versions >= 3.5.0
- CI: github: add an OpenSSL 3.5.0 job
- CI: github: update the stable CI to ubuntu-24.04
- BUG/MEDIUM: quic: SSL/TCP handshake failures with OpenSSL 3.5
- CI: github: update to OpenSSL 3.5.1
- BUG/MINOR: quic: Missing TLS 1.3 QUIC cipher suites and groups inits (OpenSSL 3.5 QUIC API)
- BUG/MINOR: quic-be: Malformed coalesced Initial packets
- MINOR: quic: Prevent QUIC backend use with the OpenSSL QUIC compatibility module (USE_OPENSS_COMPAT)
- MINOR: reg-tests: first QUIC+H3 reg tests (QUIC address validation)
- MINOR: quic-be: Set the backend alpn if not set by conf
- MINOR: quic-be: TLS version restriction to 1.3
- MINOR: cfgparse: enforce QUIC MUX compat on server line
- MINOR: server: support QUIC for dynamic servers
- CI: github: skip a ssl library version when latest is already in the list
- MEDIUM: resolvers: switch dns-accept-family to "auto" by default
- BUG/MINOR: resolvers: don't lower the case of binary DNS format
- MINOR: resolvers: do not duplicate the hostname_dn field
- MINOR: proto-tcp: Register a feature to report TCP MD5 signature support
- BUG/MINOR: listener: really assign distinct IDs to shards
- MINOR: quic: Prevent QUIC build with OpenSSL 3.5 new QUIC API version < 3.5.1
- BUG/MEDIUM: quic: Crash after QUIC server callbacks restoration (OpenSSL 3.5)
- REGTESTS: use two haproxy instances to distinguish the QUIC traces
- BUG/MEDIUM: http-client: Don't wake http-client applet if nothing was xferred
- BUG/MEDIUM: http-client: Properly inc input data when HTX blocks are xferred
- BUG/MEDIUM: http-client: Ask for more room when request data cannot be xferred
- BUG/MEDIUM: http-client: Test HTX_FL_EOM flag before commiting the HTX buffer
- BUG/MINOR: http-client: Ignore 1XX interim responses in non-HTX mode
- BUG/MINOR: http-client: Reject any 101-switching-protocols response
- BUG/MEDIUM: http-client: Drain the request if an early response is received
- BUG/MEDIUM: http-client: Notify applet has more data to deliver until the EOM
- BUG/MINOR: h3: fix https scheme request encoding for BE side
- MINOR: h1-htx: Add function to format an HTX message in its H1 representation
- BUG/MINOR: mux-h1: Use configured error files if possible for early H1 errors
- BUG/MINOR: h1-htx: Don't forget to init flags in h1_format_htx_msg function
- CLEANUP: assorted typo fixes in the code, commits and doc
- BUILD: adjust scripts/build-ssl.sh to modern CMake system of QuicTLS
- MINOR: debug: add distro name and version in postmortem
Since 2012, systemd compliant distributions contain
/etc/os-release file. This file has some standardized format, see details at
https://www.freedesktop.org/software/systemd/man/latest/os-release.html.
Let's read it in feed_post_mortem_linux() to gather more info about the
distribution.
(cherry picked from commit f1594c41368baf8f60737b229e4359fa7e1289a9)
Signed-off-by: Willy Tarreau <w@1wt.eu>
The regression was introduced by commit 187ae28 ("MINOR: h1-htx: Add
function to format an HTX message in its H1 representation"). We must be
sure the flags variable must be initialized in h1_format_htx_msg() function.
This patch must be backported with the commit above.
The H1 multiplexer is able to produce some errors on its own to report early
errors, before the stream is created. In that case, the error files of the
proxy were tested to detect empty files (or /dev/null) but they were not
used to produce the error itself.
But the documentation states that configured error files are used in all
cases. And in fact, it is not really a problem to use these files. We must
just format a full HTX message. Thanks to the previous patch, it is now
possible.
This patch should fix the issue #3032. It should be backported to 3.2. For
older versions, it must be discussed but it should be quite easy to do.
The function h1_format_htx_msg() can now be used to convert a valid HTX
message in its H1 representation. No validity test is performed, the HTX
message must be valid. Only trailers are silently ignored if the message is
not chunked. In addition, the destination buffer must be empty. 1XX interim
responses should be supported. But again, there is no validity tests.
An HTTP/3 request must contains :scheme pseudo-header. Currently, only
"https" value is expected due to QUIC transport layer in use.
However, https value is incorrectly encoded due to a QPACK index value
mismatch in qpack_encode_scheme(). Fix it to ensure that scheme is now
properly set for HTTP/3 requests on the backend side.
No need to backport this.
When we leave the I/O handler with an unfinished request, we must report the
applet has more data to deliver. Otherwise, when the channel request buffer
is emptied, the http-client applet is not always woken up to forward the
remaining request data.
This issue was probably revealed by commit "BUG/MEDIUM: http-client: Don't
wake http-client applet if nothing was xferred". It is only an issue with
large POSTs, when the payload is streamed.
This patch must be backported as far as 2.6 with the commit above. But on
older versions, the applet API may differ. So be careful.
When a large request is sent, it is possible to have a response before the
end of the request. It is valid from HTTP perspective but it is an issue
with the current design of the http-client. Indded, the request and the
response are handled sequentially. So the response will be blocked, waiting
for the end of the request. Most of time, it is not an issue, except when
the request transfer is blocked. In that case, the applet is blocked.
With the current API, it is not possible to handle early response and
continue the request transfer. So, this case cannot be handle. In that case,
it seems reasonnable to drain the request if a response is received. This
way, the request transfer, from the caller point of view, is never blocked
and the response can be properly processed.
To do so, the action flag HTTPCLIENT_FA_DRAIN_REQ is added to the
http-client. When it is set, the request payload is just dropped. In that
case, we take care to not report the end of input to properly report the
request was truncated, especially in logs.
It is only an issue with large POSTs, when the payload is streamed.
This patch must be backported as far as 2.6.
Protocol updages are not supported by the http-client. So report an error is
a 101-switching-protocols response is received. Of course, it is unexpected
because the API is not designed to support upgrades. But it is better to
properly handle this case.
This patch could be backported as far as 2.6. It depends on the commit
"BUG/MINOR: http-client: Ignore 1XX interim responses in non-HTX mode".
When the response is re-formatted in raw message, the 1XX interim responses
must be skipped. Otherwise, information of the first interim response will
be saved (status line and headers) and those from the final response will be
dropped.
Note that for now, in HTX-mode, the interim messages are removed.
This patch must be backported as far as 2.6.
when htx_to_buf() function is called, if the HTX message is empty, the
buffer is reset. So HTX flags must not be tested after because the info may
be lost.
So now, we take care to test HTX_FL_EOM flag before calling htx_to_buf().
This patch must be backported as far as 2.8.
When the request payload cannot be xferred to the channel because its buffer
is full, we must request for more room by calling sc_need_room(). It is
important to be sure the httpclient applet will not be woken up in loop to
push more data while it is not possible.
It is only an issue with large POSTs, when the payload is streamed.
This patch must be backported as far as 2.6. Note that on 2.6,
sc_need_room() only takes one argument.
When HTX blocks from the requests are transferred into the channel buffer,
the return value of htx_xfer_blks() function must not be used to increment
the channel input value because meta data are counted here while they are
not part of input data. Because of this bug, it is possible to forward more
data than these present in the channel buffer.
Instead, we look at the input data before and after the transfer and the
difference is added.
It is only an issue with large POSTs, when the payload is streamed.
This patch must be backported as far as 2.6.
When data are transferred to or from the htt-pclient, the applet is
systematically woken up, even when no data are transferred. This could lead
to needlessly wakeups. When called from a lua script, if data are blocked
for a while, this leads to a wakeup ping-pong loop where the http-client
applet is woken up by the lua script which wakes back the script.
To fix the issue, in httpclient_req_xfer() and httpclient_res_xfer()
functions, we now take care to not wake the http-client applet up when no
data are transferred.
This patch must be backported as far as 2.6.
The aim of this patch is to identify the QUIC traces between the QUIC frontend
and backend parts. Two haproxy instances are created. The c(1|2) http clients
connect to ha1 with TCP frontends and QUIC backends. ha2 embeds two QUIC listeners
with s1 as TCP backend. When the traces are activated, they are dumped to stderr.
Hopefully, they are prefixed by the haproxy instance name (h1 or h2). This is very
useful to identify the QUIC instances.
Revert this patch which is no more useful since OpenSSL 3.5.1 to remove the
QUIC server callback restoration after SSL context switch:
MINOR: quic: OpenSSL 3.5 internal QUIC custom extension for transport parameters reset
It was required for 3.5.0. That said, there was no CI for OpenSSL 3.5 at the date
of this commit. The CI recently revealed that the QUIC server side could crash
during QUIC reg tests just after having restored the callbacks as implemented by
the commit above.
Also revert this commit which is no more useful because it arrived with the commit
above:
BUG/MEDIUM: quic: SSL/TCP handshake failures with OpenSSL 3.
Must be backported to 3.2.
The QUIC listener part was impacted by the 3.5.0 OpenSSL new QUIC API with several
issues which have been fixed by 3.5.1.
Add a #error to prevent such OpenSSL 3.5 new QUIC API use with version below 3.5.1.
Must be backported to 3.2.
A fix was made in 3.0 for the case where sharded listeners were using
a same ID with commit 0db8b6034d ("BUG/MINOR: listener: always assign
distinct IDs to shards"). However, the fix is incorrect. By checking the
ID of temporary node instead of the kept one in bind_complete_thread_setup()
it ends up never inserting the used nodes at this point, thus not reserving
them. The side effect is that assigning too close IDs to subsequent
listeners results in the same ID still being assigned twice since not
reserved. Example:
global
nbthread 20
frontend foo
bind :8000 shards by-thread id 10
bind :8010 shards by-thread id 20
The first one will start a series from 10 to 29 and the second one a
series from 20 to 39. But 20 not being inserted when creating the shards,
it will remain available for the post-parsing phase that assigns all
unassigned IDs by filling holes, and two listeners will have ID 20.
By checking the correct node, the problem disappears. The patch above
was marked for backporting to 2.6, so this fix should be backported that
far as well.
"HAVE_TCP_MD5SIG" feature is now registered if TCP MD5 signature is
supported. This will help the feature detection in the reg-test script
dedicated to this feature.
The hostdn.key field in the server contains a pure copy of the hostname_dn
since commit 3406766d57 ("MEDIUM: resolvers: add a ref between servers and
srv request or used SRV record") which wanted to lowercase it. Since it's
not necessary, let's drop this useless copy. In addition, the return from
strdup() was not tested, so it could theoretically crash the process under
heavy memory contention.
The server's "hostname_dn" is in Domain Name format, not a pure string, as
converted by resolv_str_to_dn_label(). It is made of lower-case string
components delimited by binary lengths, e.g. <0x03>www<0x07>haproxy<0x03)org.
As such it must not be lowercased again in srv_state_srv_update(), because
1) it's useless on the name components since already done, and 2) because
it would replace component lengths 97 and above by 32-char shorter ones.
Granted, not many domain names have that large components so the risk is
very low but the operation is always wrong anyway. This was brought in
2.5 by commit 3406766d57 ("MEDIUM: resolvers: add a ref between servers
and srv request or used SRV record").
In the same vein, let's fix the confusing strcasecmp() that are applied
to this binary format, and use memcmp() instead. Here there's basically
no risk to incorrectly match the wrong record, but that test alone is
confusing enough to provoke the existence of the bug above.
Finally let's update the component for that field to mention that it's
in this format and already lower cased.
Better not backport this, the risk of facing this bug is almost zero, and
every time we touch such files something breaks for bad reasons.
Skip the job for "latest" libssl version, when this version is the same
as a one already in the list.
This avoid having 2 jobs for OpenSSL 3.5.1 since no new dev version are
available for now and 3.5.1 is already in the list.
To properly support QUIC for dynamic servers, it is required to extend
add server CLI handler :
* ensure conformity between server address and proto
* automatically set proto to QUIC if not specified
* prepare_srv callback must be called to initialize required SSL context
Prior to this patch, crashes may occur when trying to use QUIC with
dynamic servers.
Also, destroy_srv callback must be called when a dynamic server is
deallocated. This ensures that there is no memory leak due to SSL
context.
No need to backport.
Add postparsing checks to control server line conformity regarding QUIC
both on the server address and the MUX protocol. An error is reported in
the following case :
* proto quic is explicitely specified but server address does not
specify quic4/quic6 prefix
* another proto is explicitely specified but server address uses
quic4/quic6 prefix
This patch skips the TLS version settings. They have as a side effect to add
all the TLS version extensions to the ClientHello message (TLS 1.0 to TLS 1.3).
QUIC supports only TLS 1.3.
First simple VTC file for QUIC reg tests. Two listeners are configured, one without
Retry enabled and the other without. Two clients simply tries to connect to these
listeners to make an basic H3 request.
Make the server line parsing fail when a QUIC backend is configured if haproxy
is built to use the OpenSSL stack compatibility module. This latter does not
support the QUIC client part.
This bug fix completes this patch which was not sufficient:
MINOR: quic-be: Allow sending 1200 bytes Initial datagrams
This patch could not allow the build of well formed Initial packets coalesced to
others (Handshake) packets. Indeed, the <padding> parameter passed to qc_build_pkt()
is deduced from a first value: <padding> value and must be set to 1 for
the last encryption level. As a client, the last encryption level is always
the Handshake encryption level. But <padding> was always set to 1 for a QUIC
client, leading the first Initial packet to be malformed because considered
as the second one into the same datagram.
So, this patch sets <padding> value passed to qc_build_pkt() to 1 only when there
is no last encryption level at all, to allow the build of Initial only packets
(not coalesced) or when it frames to send (coalesced packets).
No need to backport.
This bug impacts both QUIC backends and frontends with OpenSSL 3.5 as QUIC API.
The connections to a haproxy QUIC listener from a haproxy QUIC backend could not
work at all without HelloRetryRequest TLS messages emitted by the backend
asking the QUIC client to restart the handshake followed by TLS alerts:
conn. @(nil) OpenSSL error[0xa000098] read_state_machine: excessive message size
Furthermore, the Initial CRYPTO data sent by the client were big (about two 1252 bytes
packets) (ClientHello TLS message). After analyzing the packets a key_share extension
with <unknown> as value was long (more that 1Ko). This extension is in relation with
the groups but does not belong to the groups supported by QUIC.
That said such connections could work with ngtcp2 as backend built against the same
OSSL TLS stack API but with a HelloRetryRequest.
ngtcp2 always set the QUIC default cipher suites and group, for all the stacks it
supports as implemented by this patch.
So this patch configures both QUIC backend and frontend cipher suites and groups
calling SSL_CTX_set_ciphersuites() and SSL_CTX_set1_groups_list() with the correct
argument, except for SSL_CTX_set1_groups_list() which fails with QUIC TLS for
a unknown reason at this time.
The call to SSL_CTX_set_options() is useless from ssl_quic_initial_ctx() for the QUIC
clients. One relies on ssl_sock_prepare_srv_ssl_ctx() to set them for now on.
This patch is effective for all the supported stacks without impact for AWS-LC,
and QUIC TLS and fixes the connections for haproxy QUIC frontend and backends
when builts against OpenSSL 3.5 QUIC API).
A new define HAVE_OPENSSL_QUICTLS has been added to openssl-compat.h to distinguish
the QUIC TLS stack.
Must be backported to 3.2.
This bug arrived with this commit:
MINOR: quic: OpenSSL 3.5 internal QUIC custom extension for transport parameters reset
To make QUIC connection succeed with OpenSSL 3.5 API, a call to quic_ssl_set_tls_cbs()
was needed from several callback which call SSL_set_SSL_CTX(). This has as side effect
to set the QUIC callbacks used by the OpenSSL 3.5 API.
But quic_ssl_set_tls_cbs() was also called for TCP sessions leading the SSL stack
to run QUIC code, if the QUIC support is enabled.
To fix this, simply ignore the TCP connections inspecting the <ssl_qc_app_data_index>
index value which is NULL for such connections.
Must be backported to 3.2.
OpenSSL 3.5.0 introduced experimental support for QUIC. This change enables the use_quic option when a compatible version of OpenSSL is detected, allowing QUIC-based functionality to be leveraged where applicable. Feature remains disabled for earlier versions to ensure compatibility.
Patterns are allocated when loading maps/acls from a file or dynamically
via the CLI, and are released only from the CLI (e.g. "clear map xxx").
These ones do not use pools and are much harder to monitor, e.g. in case
a script adds many and forgets to clear them, etc.
Let's add a new pair of metrics "PatternsAdded" and "PatternsFreed" that
will report the number of added and freed patterns respectively. This
can allow to simply graph both. The difference between the two normally
represents the number of allocated patterns. If Added grows without
Freed following, it can indicate a faulty script that doesn't perform
the needed cleanup. The metrics are also made available to Prometheus
as patterns_added_total and patterns_freed_total respectively.
