This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
List.h was missing for LIST_ADDQ(). A few unneeded includes of action.h
were removed from certain files.
This one still relies on applet.h and stick-table.h.
A few includes were missing in each file. A definition of
struct polled_mask was moved to fd-t.h. The MAX_POLLERS macro was
moved to defaults.h
Stdio used to be silently inherited from whatever path but it's needed
for list_pollers() which takes a FILE* and which can thus not be
forward-declared.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
The protocol.h files are pretty low in the dependency and (sadly) used
by some files from common/. Almost nothing was changed except lifting a
few comments.
The type was moved out as it's used by standard.h for netns_entry.
Instead of just being a forward declaration when not used, it's an
empty struct, which makes gdb happier (the resulting stripped executable
is the same).
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
This one used to be stored into debug.h but the debug tools got larger
and require a lot of other includes, which can't use BUG_ON() anymore
because of this. It does not make sense and instead this macro should
be placed into the lower includes and given its omnipresence, the best
solution is to create a new bug.h with the few surrounding macros needed
to trigger bugs and place assertions anywhere.
Another benefit is that it won't be required to add include <debug.h>
anymore to use BUG_ON, it will automatically be covered by api.h. No
less than 32 occurrences were dropped.
The FSM_PRINTF macro was dropped since not used at all anymore (probably
since 1.6 or so).
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
Backend counters must be incremented only if a backend was already assigned to
the stream (when the stream exists). Otherwise, it means we are still on the
frontend side.
This patch may be backported as far as 1.6.
When an action interrupts a transaction, returning a response or not, it must
return the ACT_RET_ABRT value and not ACT_RET_STOP. ACT_RET_STOP is reserved to
stop the processing of the current ruleset.
No backport needed because on previous versions, the action return values are
not handled the same way.
When at least a filter is attached to a stream, FLT_END analyzers must be
preserved on request and response channels.
This patch should be backported as far as 1.7.
Just like previous commit, we don't need to pass through the connection
layer anymore to enable polling during a connect(), we know the FD, so
let's simply call fd_want_send().
When an end pointer is passed, instead of complaining that a comma is
missing after a keyword, sample_parse_expr() will silently return the
pointer to the current location into this return pointer so that the
caller can continue its parsing. This will be used by more complex
expressions which embed sample expressions, and may even permit to
embed sample expressions into arguments of other expressions.
when `getsockopt` previously failed, we were trying to set defaultmss
with -2 value.
this is a followup of github issue #499
this should be backported to all versions >= v1.8
Fixes: 153659f1ae ("MINOR: tcp: When binding socket, attempt to
reuse one from the old proc.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
we were trying to close file descriptor even when `socket` call was
failing.
this should fix github issue #499
this should be backported to all versions >= v1.8
Fixes: 153659f1ae ("MINOR: tcp: When binding socket, attempt to
reuse one from the old proc.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
When intializing a listener, let's make sure the bind_thread mask is
always limited to all_threads_mask when inserting the FD. This will
avoid seeing listening FDs with bits corresponding to threads that are
not active (e.g. when using "bind ... process 1/even"). The side effect
is very limited, all that was identified is that atomic operations are
used in fd_update_events() when not necessary. It's more a matter of
long-term correctness in practice.
This fix might be backported as far as 1.8 (then proto_sockpair must
be dropped).
The function is not TCP-specific at all, it covers all FD-based sockets
so let's move this where other similar functions are, in connection.c,
and rename it conn_fd_check().
Now that we know what pollers can return ERR/HUP, we can take this
into account to save one syscall: with such a poller, if neither are
reported, then we know the connection succeeded and we don't need to
go with getsockopt() nor connect() to validate this. In addition, for
the remaining cases (select() or suspected errors), we'll always go
through the extra connect() attempt and enumerate possible "in progress",
"connected" or "failed" status codes and take action solely based on
this.
This results in one saved syscall on modern pollers, only a second
connect() still being used on select() and the server's address never
being needed anymore.
Note that we cannot safely replace connect() with getsockopt() as the
latter clears the error on the socket without saving it, and health
checks rely on it for their reporting. This would be OK if the error
was saved in the connection itself.
We never enter val_fc_time_value when an associated fetcher such as `fc_rtt` is
called without argument. meaning `type == ARGT_STOP` will never be true and so
the default `data.sint = TIME_UNIT_MS` will never be set. remove this part to
avoid thinking default data.sint is set to ms while reading the code.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
[Cf: This patch may safely backported as far as 1.7. But no matter if not.]
There are 2 kinds of tcp info fetchers. Those returning a time value (fc_rtt and
fc_rttval) and those returning a counter (fc_unacked, fc_sacked, fc_retrans,
fc_fackets, fc_lost, fc_reordering). Because of a bug, the counters were handled
as time values, and by default, were divided by 1000 (because of an invalid
conversion from us to ms). To work around this bug and have the right value, the
argument "us" had to be specified.
So now, tcp info fetchers returning a counter don't support any argument
anymore. To not break old configurations, if an argument is provided, it is
ignored and a warning is emitted during the configuration parsing.
In addition, parameter validiation is now performed during the configuration
parsing.
This patch must be backported as far as 1.7.
In order to address the absurd polling sequence described in issue #253,
let's make sure we disable receiving on a connection until it's established.
Previously with bottom-top I/Os, we were almost certain that a connection
was ready when the first I/O was confirmed. Now we can enter various
functions, including process_stream(), which will attempt to read
something, will fail, and will then subscribe. But we don't want them
to try to receive if we know the connection didn't complete. The first
prerequisite for this is to mark the connection as not ready for receiving
until it's validated. But we don't want to mark it as not ready for sending
because we know that attempting I/Os later is extremely likely to work
without polling.
Once the connection is confirmed we re-enable recv readiness. In order
for this event to be taken into account, the call to tcp_connect_probe()
was moved earlier, between the attempt to send() and the attempt to recv().
This way if tcp_connect_probe() enables reading, we have a chance to
immediately fall back to this and read the possibly pending data.
Now the trace looks like the following. It's far from being perfect
but we've already saved one recvfrom() and one epollctl():
epoll_wait(3, [], 200, 0) = 0
socket(AF_INET, SOCK_STREAM, IPPROTO_TCP) = 7
fcntl(7, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
setsockopt(7, SOL_TCP, TCP_NODELAY, [1], 4) = 0
connect(7, {sa_family=AF_INET, sin_port=htons(8000), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EINPROGRESS (Operation now in progress)
epoll_ctl(3, EPOLL_CTL_ADD, 7, {EPOLLIN|EPOLLOUT|EPOLLRDHUP, {u32=7, u64=7}}) = 0
epoll_wait(3, [{EPOLLOUT, {u32=7, u64=7}}], 200, 1000) = 1
connect(7, {sa_family=AF_INET, sin_port=htons(8000), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
getsockopt(7, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
sendto(7, "OPTIONS / HTTP/1.0\r\n\r\n", 22, MSG_DONTWAIT|MSG_NOSIGNAL, NULL, 0) = 22
epoll_ctl(3, EPOLL_CTL_MOD, 7, {EPOLLIN|EPOLLRDHUP, {u32=7, u64=7}}) = 0
epoll_wait(3, [{EPOLLIN|EPOLLRDHUP, {u32=7, u64=7}}], 200, 1000) = 1
getsockopt(7, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
getsockopt(7, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
recvfrom(7, "HTTP/1.0 200\r\nContent-length: 0\r\nX-req: size=22, time=0 ms\r\nX-rsp: id=dummy, code=200, cache=1, size=0, time=0 ms (0 real)\r\n\r\n", 16384, 0, NULL, NULL) = 126
close(7) = 0
Dragan Dosen found that the listeners lock is not sufficient to protect
the listeners list when proxies are stopping because the listeners are
also unlinked from the protocol list, and under certain situations like
bombing with soft-stop signals or shutting down many frontends in parallel
from multiple CLI connections, it could be possible to provoke multiple
instances of delete_listener() to be called in parallel for different
listeners, thus corrupting the protocol lists.
Such operations are pretty rare, they are performed once per proxy upon
startup and once per proxy on shut down. Thus there is no point trying
to optimize anything and we can use a global lock to protect the protocol
lists during these manipulations.
This fix (or a variant) will have to be backported as far as 1.8.
Most of the locations were already safe, only two places needed to have
one extra check to avoid assuming that cli_conn->src is necessarily set
(it is in practice but let's stay safe).
The old module proto_http does not exist anymore. All code dedicated to the HTTP
analysis is now grouped in the file proto_htx.c. So, to finish the polishing
after removing the legacy HTTP code, proto_htx.{c,h} files have been moved in
http_ana.{c,h} files.
In addition, all HTX analyzers and related functions prefixed with "htx_" have
been renamed to start with "http_" instead.
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
In tcp_probe_connect(), if the connection is still pending, do not disable
want_recv, we don't have any business to do so, but explicitely use
__conn_xprt_want_send(), otherwise the next time we'll reach tcp_probe_connect,
fd_send_ready() would return 0 and we would never flag the connection as
CO_FL_CONNECTED, which can lead to various problems, such as check not
completing because they consider it is not connected yet.
Now that the various handshakes come with their own XPRT, there's no
need for the CONN_FL_SOCK* flags, and the conn_sock_want|stop functions,
so garbage-collect them.
Have "socks4" and "check-via-socks4" server keyword added.
Implement handshake with SOCKS4 proxy server for tcp stream connection.
See issue #82.
I have the "SOCKS: A protocol for TCP proxy across firewalls" doc found
at "https://www.openssh.com/txt/socks4.protocol". Please reference to it.
[wt: for now connecting to the SOCKS4 proxy over unix sockets is not
supported, and mixing IPv4/IPv6 is discouraged; indeed, the control
layer is unique for a connection and will be used both for connecting
and for target address manipulation. As such it may for example report
incorrect destination addresses in logs if the proxy is reached over
IPv6]
