Finn Arne Gangstad reported that commit 6b726adb35 ("MEDIUM: http: do
not report connection errors for second and further requests") breaks
support for serving static files by abusing the errorfile 503 statement.
Indeed, a second request over a connection sent to any server or backend
returning 503 would silently be dropped.
The proper solution consists in adding a flag on the session indicating
that the server connection was reused, and to only avoid the error code
in this case.
The new tune.idletimer value allows one to set a different value for
idle stream detection. The default value remains set to one second.
It is possible to disable it using zero, and to change the default
value at build time using DEFAULT_IDLE_TIMER.
We store the time stamp of last read in the channel in order to
be able to measure some bit rate and pause lengths. We only use
16 bits which were unused for this. We don't need more, as it
allows us to measure with a millisecond precision for up to 65s.
Summary:
Track and report last session time on the stats page for each server
in every backend, as well as the backend.
This attempts to address the requirement in the ROADMAP
- add a last activity date for each server (req/resp) that will be
displayed in the stats. It will be useful with soft stop.
The stats page reports this as time elapsed since last session. This
change does not adequately address the requirement for long running
session (websocket, RDP... etc).
By having the stream interface pass the CF_STREAMER flag to the
snd_buf() primitive, we're able to tell the send layer whether
we're sending large chunks or small ones.
We use this information in SSL to adjust the max record dynamically.
This results in small chunks respecting tune.ssl.maxrecord at the
beginning of a transfer or for small transfers, with an automatic
switch to full records if the exchanges last long. This allows the
receiver to parse HTML contents on the fly without having to retrieve
16kB of data, which is even more important with small initcwnd since
the receiver does not need to wait for round trips to start fetching
new objects. However, sending large files still produces large chunks.
For example, with tune.ssl.maxrecord = 2859, we see 5 write(2885)
sent in two segments each and 6 write(16421).
This idea was first proposed on the haproxy mailing list by Ilya Grigorik.
This prevents us from passing other useful info and requires the
upper levels to know these flags. Let's use a new flags category
instead : CO_SFL_*. For now, only MSG_MORE has been remapped.
A new tcp-check rule type: connect.
It allows HAProxy to test applications which stand on multiple ports or
multiple applications load-balanced through the same backend.
Since we support HTTP keep-alive, there is no more reason for staying
in tunnel mode by default. It is confusing for new users and creates
more issues than it solves. Option "http-tunnel" is available to force
to use it if really desired.
Switching to KA by default has implied to change the value of some
option flags and some transaction flags so that value zero (default)
matches keep-alive. That explains why more code has been changed than
expected. Tests have been run on the 25 combinations of frontend and
backend options, plus a few with option http-pretend-keepalive, and
no anomaly was found.
The relation between frontend and backends remains the same. Options
have been updated to take precedence over http-keep-alive which is now
implicit.
All references in the doc to haproxy not supporting keep-alive have
been fixed, and the doc for config options has been updated.
At the very beginning of haproxy, there was "option httpclose" to make
haproxy add a "Connection: close" header in both directions to invite
both sides to agree on closing the connection. It did not work with some
rare products, so "option forceclose" was added to do the same and actively
close the connection. Then client-side keep-alive was supported, so option
http-server-close was introduced. Now we have keep-alive with a fourth
option, not to mention the implicit tunnel mode.
The connection configuration has become a total mess because all the
options above may be combined together, despite almost everyone thinking
they cancel each other, as judging from the common problem reports on the
mailing list. Unfortunately, re-reading the doc shows that it's not clear
at all that options may be combined, and the opposite seems more obvious
since they're compared. The most common issue is options being set in the
defaults section that are not negated in other sections, but are just
combined when the user expects them to be overloaded. The migration to
keep-alive by default will only make things worse.
So let's start to address the first problem. A transaction can only work in
5 modes today :
- tunnel : haproxy doesn't bother with what follows the first req/resp
- passive close : option http-close
- forced close : option forceclose
- server close : option http-server-close with keep-alive on the client side
- keep-alive : option http-keep-alive, end to end
All 16 combination for each section fall into one of these cases. Same for
the 256 combinations resulting from frontend+backend different modes.
With this patch, we're doing something slightly different, which will not
change anything for users with valid configs, and will only change the
behaviour for users with unsafe configs. The principle is that these options
may not combined anymore, and that the latest one always overrides all the
other ones, including those inherited from the defaults section. The "no
option xxx" statement is still supported to cancel one option and fall back
to the default one. It is mainly needed to ignore defaults sections (eg:
force the tunnel mode). The frontend+backend combinations have not changed.
So for examplen the following configuration used to put the connection
into forceclose :
defaults http
mode http
option httpclose
frontend foo.
option http-server-close
=> http-server-close+httpclose = forceclose before this patch! Now
the frontend's config replaces the defaults config and results in
the more expected http-server-close.
All 25 combinations of the 5 modes in (frontend,backend) have been
successfully tested.
In order to prepare for upcoming changes, a new "option http-tunnel" was
added. It currently only voids all other options, and has the lowest
precedence when mixed with another option in another frontend/backend.
If no CA file specified on a server line, the config parser will show an error.
Adds an cmdline option '-dV' to re-set verify 'none' as global default on
servers side (previous behavior).
Also adds 'ssl-server-verify' global statement to set global default to
'none' or 'required'.
WARNING: this changes the default verify mode from "none" to "required" on
the server side, and it *will* break insecure setups.
Till now, we had one flag per stick counter to indicate if it was
tracked in a backend or in a frontend. We just had to add another
flag per stick-counter to indicate if it relies on contents or just
connection. These flags are quite painful to maintain and tend to
easily conflict with other flags if their number is changed.
The correct solution consists in moving the flags to the stkctr struct
itself, but currently this struct is made of 2 pointers, so adding a
new entry there to store only two bits will cause at least 16 more bytes
to be eaten per counter due to alignment issues, and we definitely don't
want to waste tens to hundreds of bytes per session just for things that
most users don't use.
Since we only need to store two bits per counter, an intermediate
solution consists in replacing the entry pointer with a composite
value made of the original entry pointer and the two flags in the
2 unused lower bits. If later a need for other flags arises, we'll
have to store them in the struct.
A few inline functions have been added to abstract the retrieval
and assignment of the pointers and flags, resulting in very few
changes. That way there is no more dependence on the number of
stick-counters and their position in the session flags.
One year ago, commit 5d5b5d8 ("MEDIUM: proto_tcp: add support for tracking
L7 information") brought support for tracking L7 information in tcp-request
content rules. Two years earlier, commit 0a4838c ("[MEDIUM] session-counters:
correctly unbind the counters tracked by the backend") used to flush the
backend counters after processing a request.
While that earliest patch was correct at the time, it became wrong after
the second patch was merged. The code does what it says, but the concept
is flawed. "TCP request content" rules are evaluated for each HTTP request
over a single connection. So if such a rule in the frontend decides to
track any L7 information or to track L4 information when an L7 condition
matches, then it is applied to all requests over the same connection even
if they don't match. This means that a rule such as :
tcp-request content track-sc0 src if { path /index.html }
will count one request for index.html, and another one for each of the
objects present on this page that are fetched over the same connection
which sent the initial matching request.
Worse, it is possible to make the code do stupid things by using multiple
counters:
tcp-request content track-sc0 src if { path /foo }
tcp-request content track-sc1 src if { path /bar }
Just sending two requests first, one with /foo, one with /bar, shows
twice the number of requests for all subsequent requests. Just because
both of them persist after the end of the request.
So the decision to flush backend-tracked counters was not the correct
one. In practice, what is important is to flush countent-based rules
since they are the ones evaluated for each request.
Doing so requires new flags in the session however, to keep track of
which stick-counter was tracked by what ruleset. A later change might
make this easier to maintain over time.
This bug is 1.5-specific, no backport to stable is needed.
Just like the previous commit, we sometimes want to limit the rate of
incoming SSL connections. While it can be done for a frontend, it was
not possible for a whole process, which makes sense when multiple
processes are running on a system to server multiple customers.
The new global "maxsslrate" setting is usable to fix a limit on the
session rate going to the SSL frontends. The limits applies before
the SSL handshake and not after, so that it saves the SSL stack from
expensive key computations that would finally be aborted before being
accounted for.
The same setting may be changed at run time on the CLI using
"set rate-limit ssl-session global".
It's sometimes useful to be able to limit the connection rate on a machine
running many haproxy instances (eg: per customer) but it removes the ability
for that machine to defend itself against a DoS. Thus, better also provide a
limit on the session rate, which does not include the connections rejected by
"tcp-request connection" rules. This permits to have much higher limits on
the connection rate without having to raise the session rate limit to insane
values.
The limit can be changed on the CLI using "set rate-limit sessions global",
or in the global section using "maxsessrate".
These flags were used to report the readiness of the file descriptor.
Now this readiness is directly checked at the file descriptor itself.
This removes the need for constantly synchronizing updates between the
file descriptor and the connection and ensures that all layers share
the same level of information.
For now, the readiness is updated in conn_{sock,data}_poll_* by directly
touching the file descriptor. This must move to the lower layers instead
so that these functions can disappear as well. In this state, the change
works but is incomplete. It's sensible enough to avoid making it more
complex.
Now the sock/data updates become much simpler because they just have to
enable/disable access to a file descriptor and not to care anymore about
its readiness.
This commit heavily changes the polling system in order to definitely
fix the frequent breakage of SSL which needs to remember the last
EAGAIN before deciding whether to poll or not. Now we have a state per
direction for each FD, as opposed to a previous and current state
previously. An FD can have up to 8 different states for each direction,
each of which being the result of a 3-bit combination. These 3 bits
indicate a wish to access the FD, the readiness of the FD and the
subscription of the FD to the polling system.
This means that it will now be possible to remember the state of a
file descriptor across disable/enable sequences that generally happen
during forwarding, where enabling reading on a previously disabled FD
would result in forgetting the EAGAIN flag it met last time.
Several new state manipulation functions have been introduced or
adapted :
- fd_want_{recv,send} : enable receiving/sending on the FD regardless
of its state (sets the ACTIVE flag) ;
- fd_stop_{recv,send} : stop receiving/sending on the FD regardless
of its state (clears the ACTIVE flag) ;
- fd_cant_{recv,send} : report a failure to receive/send on the FD
corresponding to EAGAIN (clears the READY flag) ;
- fd_may_{recv,send} : report the ability to receive/send on the FD
as reported by poll() (sets the READY flag) ;
Some functions are used to report the current FD status :
- fd_{recv,send}_active
- fd_{recv,send}_ready
- fd_{recv,send}_polled
Some functions were removed :
- fd_ev_clr(), fd_ev_set(), fd_ev_rem(), fd_ev_wai()
The POLLHUP/POLLERR flags are now reported as ready so that the I/O layers
knows it can try to access the file descriptor to get this information.
In order to simplify the conditions to add/remove cache entries, a new
function fd_alloc_or_release_cache_entry() was created to be used from
pollers while scanning for updates.
The following pollers have been updated :
ev_select() : done, built, tested on Linux 3.10
ev_poll() : done, built, tested on Linux 3.10
ev_epoll() : done, built, tested on Linux 3.10 & 3.13
ev_kqueue() : done, built, tested on OpenBSD 5.2
We're completely changing the way FDs will be polled. There will be no
more speculative I/O since we'll know the exact FD state, so these will
only be cached events.
First, let's fix a few field names which become confusing. "spec_e" was
used to store a speculative I/O event state. Now we'll store the whole
R/W states for the FD there. "spec_p" was used to store a speculative
I/O cache position. Now let's clearly call it "cache".
We're completely changing the way FDs will be polled. First, let's fix
a few field names which become confusing. "spec_e" was used to store a
speculative I/O event state. Now we'll store the whole R/W states for
the FD there.
Patrick Hemmer reported that using unique_id_format and logs did not
report the same unique ID counter since commit 9f09521 ("BUG/MEDIUM:
unique_id: HTTP request counter must be unique!"). This is because
the increment was done while producing the log message, so it was
performed twice.
A better solution consists in fetching a new value once per request
and saving it in the request or session context for all of this
request's life.
It happens that sessions already have a unique ID field which is used
for debugging and reporting errors, and which differs from the one
sent in logs and unique_id header.
So let's change this to reuse this field to have coherent IDs everywhere.
As of now, a session gets a new unique ID once it is instanciated. This
means that TCP sessions will also benefit from a unique ID that can be
logged. And this ID is renewed for each extra HTTP request received on
an existing session. Thus, all TCP sessions and HTTP requests will have
distinct IDs that will be stable along all their life, and coherent
between all places where they're used (logs, unique_id header,
"show sess", "show errors").
This feature is 1.5-specific, no backport to 1.4 is needed.
It is quite often that an connection error only reports "socket error" with
no more information. This is especially problematic with health checks where
many causes are possible, including resource exhaustion which do not lead to
a valid errno code. So let's add explicit codes to cover these cases.
Since commit 6b66f3e ([MAJOR] implement autonomous inter-socket forwarding)
introduced in 1.3.16-rc1, we've been relying on a stupid mechanism to wake
up the task after a write, which was an exact copy-paste of the reader side.
The principle was that if we empty a buffer and there's no forwarding
scheduled or if the *producer* is not in a connected state, then we wake
the task up.
That does not make any sense. It happens to wake up too late sometimes (eg,
when the request analyser waits for some room in the buffer to start to
work), and leads to unneeded wakeups in client-side keep-alive, because
the task is woken up when the response is sent, while the analysers are
simply waiting for a new request.
In order to fix this, we introduce a new channel flag : CF_WAKE_WRITE. It
is designed so that an analyser can explicitly request being notified when
some data were written. It is used only when the HTTP request or response
analysers need to wait for more room in the buffers. It is automatically
cleared upon wake up.
The flag is also automatically set by the functions which try to write into
a buffer from an applet when they fail (bi_putblk() etc...).
That allows us to remove the stupid condition above and avoid some wakeups.
In http-server-close and in http-keep-alive modes, this reduces from 4 to 3
the average number of wakeups per request, and increases the overall
performance by about 1.5%.
This value is stored as unsigned in chn->to_forward. Having it defined
as signed makes it impossible to pass channel_forward() a previously
saved value because the argument will be zero-extended during the
conversion to long long, while the test will be performed using sign
extension. There is no impact on existing code right now.
In HTTP keep-alive mode, if we receive a 401, we still have a chance
of being able to send the visitor again to the same server over the
same connection. This is required by some broken protocols such as
NTLM, and anyway whenever there is an opportunity for sending the
challenge to the proper place, it's better to do it (at least it
helps with debugging).
When the load balancing algorithm in use is not deterministic, and a previous
request was sent to a server to which haproxy still holds a connection, it is
sometimes desirable that subsequent requests on a same session go to the same
server as much as possible. Note that this is different from persistence, as
we only indicate a preference which haproxy tries to apply without any form
of warranty. The real use is for keep-alive connections sent to servers. When
this option is used, haproxy will try to reuse the same connection that is
attached to the server instead of rebalancing to another server, causing a
close of the connection. This can make sense for static file servers. It does
not make much sense to use this in combination with hashing algorithms.
Right now we see many places doing their own setsockopt(SO_LINGER).
Better only do it just before the close() in fd_delete(). For this
we add a new flag on the file descriptor, indicating if it's safe or
not to linger. If not (eg: after a connect()), then the setsockopt()
call is automatically performed before a close().
The flag automatically turns to safe when receiving a read0.
Health checks can now be paused. This is the status they get when the
server is put into maintenance mode, which is more logical than relying
on the server's state at some places. It will be needed to allow agent
checks to run when health checks are disabled (currently not possible).
Having the check state partially stored in the server doesn't help.
Some functions such as srv_getinter() rely on the server being checked
to decide what check frequency to use, instead of relying on the check
being configured. So let's get rid of SRV_CHECKED and SRV_AGENT_CHECKED
and only use the check's states instead.
At the moment, health checks and agent checks are tied : no agent
check is emitted if no health check is enabled. Other parameters
are considered in the condition for letting checks run. It will
help us selectively enable checks (agent and regular checks) to be
know whether they're enabled/disabled and configured or not. Now
we can already emit an error when trying to enable an unconfigured
agent.
The flag CHK_STATE_RUNNING is misleading as one may believe it means
the state is enabled (just like SRV_RUNNING). Let's rename these two
flags CHK_ST_INPROGRESS and CHK_ST_DISABLED.
We used to have up to 4 sets of flags which were almost all exclusive
to report a check result. And the names were inherited from the old
server states, adding to the confusion. Let's replace that with an
enum handling only the possible combinations :
SRV_CHK_UNKNOWN => CHK_RES_UNKNOWN
SRV_CHK_FAILED => CHK_RES_FAILED
SRV_CHK_PASSED => CHK_RES_PASSED
SRV_CHK_PASSED | SRV_CHK_DISABLE => CHK_RES_CONDPASS
After the move of checks from servers to autonomous checks, we need a
massive cleanup and reordering as it's becoming increasingly difficult
to find the definitions of types and enums.
Nothing was changed, blocks were just moved.
Server tracking uses the same "tracknext" list for servers tracking
another one and for the servers being tracked. This caused an issue
which was fixed by commit f39c71c ([CRITICAL] fix server state tracking:
it was O(n!) instead of O(n)), consisting in ensuring that a server is
being checked before walking down the list, so that we don't propagate
the up/down information via servers being part of the track chain.
But the root cause is the fact that all servers share the same list.
The correct solution consists in having a list head for the tracked
servers and a list of next tracking servers. This simplifies the
propagation logic, especially for the case where status changes might
be passed to individual servers via the CLI.
This patch adds map manipulation commands to the socket interface.
add map <map> <key> <value>
Add the value <value> in the map <map>, at the entry corresponding to
the key <key>. This command does not verify if the entry already
exists.
clear map <map>
Remove entries from the map <map>
del map <map> <key>
Delete all the map entries corresponding to the <key> value in the map
<map>.
set map <map> <key> <value>
Modify the value corresponding to each key <key> in a map <map>. The
new value is <value>.
show map [<map>]
Dump info about map converters. Without argument, the list of all
available maps are returned. If a <map> is specified, is content is
dumped.
With this patch, patterns can be compiled for two modes :
- match
- lookup
The match mode is used for example in ACLs or maps. The lookup mode
is used to lookup a key for pattern maintenance. For example, looking
up a network is different from looking up one address belonging to
this network.
A special case is made for regex. In lookup mode they return the input
regex string and do not compile the regex.
Now, the pat_parse_*() functions parses the incoming data. The input
"pattern" struct can be preallocated. If the parser needs to add some
buffers, it allocates memory.
The function pattern_register() runs the call to the parser, process
the key indexation and associate the "sample_storage" used by maps.
This patch remove the compatibility check from the input type and the
match method. Now, it checks if a casts from the input type to output
type exists and the pattern_exec_match() function apply casts before
each pattern matching.
This is used later for increasing the compability with incoming
sample types. When multiple compatible types are supported, one
is arbitrarily used (eg: UINT).
Baptiste Assmann reported some confusing printf() output of the server
port since it's declared signed. Better turn it to unsigned.
There's no need to backport this, it's only used in 16-bit places.
SSL and keep-alive will need to be able to fail on allocation errors,
and the stream interface did not allow to report such a cause. The flag
will then be "RC" as already documented.
Just by reordering the struct task, we could shrink it by 8 bytes from
120 to 112 bytes. A careful reordering allowed each part to be located
closer to the hot parts it's used with, resulting in another performance
increase of about 0.5%.
This reduces its size which is not reused by anything else. However it
will significantly improve the debugger's output since we'll now get
real state values.
The default case had to be enabled in the parsers because gcc tries
to optimize the switch/case and noticed some values were missing from
the enums and emitted a warning.
Here again we had some oversized and misaligned entries. The method
and the status don't need 4 bytes each, and there was a hole after
the status that does not exist anymore. That's 8 additional bytes
saved from http_txn and as much for the session.
Also some fields were slightly moved to present better memory access
patterns resulting in a steady 0.5% performance increase.
The current and previous states are now packed enums instead of ints. This will
also help in gdb. The flags have been turned to 16-bit instead of 32 since only
10 are used. This resulted in saving 8 bytes per streamm interface, or 16 per
session.
Turn the proxy state to a packed enum (1 char), same for the proxy mode,
and store the capabitilies as a char. These 3 ints can now fill the hole
after obj_type and save 8 bytes in the proxy struct. Moving the maxconn
value just after, which is frequently accessed and was in a block of 3
ints saved another 8 bytes.
Pack the listener state to 1 char, store it as an enum instead of an
int (more gdb-friendly), and move a few fields around to fill holes.
The <nice> field can only be -1024..1024 so it was stored as a signed
short and completes well with obj_type and li_state.
Doing this has reduced the struct listener from 376 to 360 bytes (4.2%).
