Instead of having to manually handle lingering outside, let's make
conn_sock_shutw() check for it before calling shutdown(). We simply
don't want to emit the FIN if we're going to reset the connection
due to lingering. It's particularly important for silent-drop where
it's absolutely mandatory that no packet leaves the machine.
These flags are not exactly for the data layer, they instead indicate
what is expected from the transport layer. Since we're going to split
the connection between the transport and the data layers to insert a
mux layer, it's important to have a clear idea of what each layer does.
All function conn_data_* used to manipulate these flags were renamed to
conn_xprt_*.
The HTTP/2->HTTP/1 gateway will need to process HTTP/1 responses. We
cannot sanely rely on the HTTP/1 txn to parse a response because :
1) responses generated by haproxy such as error messages, redirects,
stats or Lua are neither parsed nor indexed ; this could be
addressed over the long term but will take time.
2) the http txn is useless to parse the body : the states present there
are only meaningful to received bytes (ie next bytes to parse) and
not at all to sent bytes. Thus chunks cannot be followed at all.
Even when implementing this later, it's unsure whether it will be
possible when dealing with compression.
So using the HTTP txn is now out of the equation and the only remaining
solution is to call an HTTP/1 message parser. We already have one, it was
slightly modified to avoid keeping states by benefitting from the fact
that the response was produced by haproxy and this is entirely available.
It assumes the following rules are true, or that incuring an extra cost
to work around them is acceptable :
- the response buffer is read-write and supports modifications in place
- headers sent through / by haproxy are not folded. Folding is still
implemented by replacing CR/LF/tabs/spaces with spaces if encountered
- HTTP/0.9 responses are never sent by haproxy and have never been
supported at all
- haproxy will not send partial responses, the whole headers block will
be sent at once ; this means that we don't need to keep expensive
states and can afford to restart the parsing from the beginning when
facing a partial response ;
- response is contiguous (does not wrap). This was already the case
with the original parser and ensures we can safely dereference all
fields with (ptr,len)
The parser replaces all of the http_msg fields that were necessary with
local variables. The parser is not called on an http_msg but on a string
with a start and an end. The HTTP/1 states were reused for ease of use,
though the request-specific ones have not been implemented for now. The
error position and error state are supported and optional ; these ones
may be used later for bug hunting.
The parser issues the list of all the headers into a caller-allocated
array of struct ist.
The content-length/transfer-encoding header are checked and the relevant
info fed the h1 message state (flags + body_len).
The chunk crlf parser used to depend on the channel and on the HTTP
message, eventhough it's not really needed. Let's remove this dependency
so that it can be used within the H2 to H1 gateway.
As part of this small API change, it was renamed to h1_skip_chunk_crlf()
to mention that it doesn't depend on http_msg anymore.
The chunk parser used to depend on the channel and on the HTTP message
but it's not really needed as they're only used to retrieve the buffer
as well as to return the number of bytes parsed and the chunk size.
Here instead we pass the (few) relevant information in arguments so that
the function may be reused without a channel nor an HTTP message (ie
from the H2 to H1 gateway).
As part of this API change, it was renamed to h1_parse_chunk_size() to
mention that it doesn't depend on http_msg anymore.
Functions http_parse_chunk_size(), http_skip_chunk_crlf() and
http_forward_trailers() were moved to h1.h and h1.c respectively so
that they can be called from outside. The parts that were inline
remained inline as it's critical for performance (+41% perf
difference reported in an earlier test). For now the "http_" prefix
remains in their name since they still depend on the http_msg type.
Certain types and enums are very specific to the HTTP/1 parser, and we'll
need to share them with the HTTP/2 to HTTP/1 translation code. Let's move
them to h1.c/h1.h. Those with very few occurrences or only used locally
were renamed to explicitly mention the relevant HTTP version :
enum ht_state -> h1_state.
http_msg_state_str -> h1_msg_state_str
HTTP_FLG_* -> H1_FLG_*
http_char_classes -> h1_char_classes
Others like HTTP_IS_*, HTTP_MSG_* are left to be done later.
Fix regression introduced by commit:
'MAJOR: servers: propagate server status changes asynchronously.'
The building of the log line was re-worked to be done at the
postponed point without lack of data.
[wt: this only affects 1.8-dev, no backport needed]
There's no point having the channel marked writable as these functions
only extract data from the channel. The code was retrieved from their
ci/co ancestors.
For HTTP/2 we'll need some buffer-only equivalent functions to some of
the ones applying to channels and still squatting the bi_* / bo_*
namespace. Since these names have kept being misleading for quite some
time now and are really getting annoying, it's time to rename them. This
commit will use "ci/co" as the prefix (for "channel in", "channel out")
instead of "bi/bo". The following ones were renamed :
bi_getblk_nc, bi_getline_nc, bi_putblk, bi_putchr,
bo_getblk, bo_getblk_nc, bo_getline, bo_getline_nc, bo_inject,
bi_putchk, bi_putstr, bo_getchr, bo_skip, bi_swpbuf
Since commit 'MAJOR: task: task scheduler rework'
0194897e540cec67d7d1e9281648b70efe403f08. LUA's
scheduling tasks are freezing.
A running task should not handle the scheduling itself
but let the task scheduler to handle it based on the
'expire' field.
[wt: no backport needed]
Clear MaxSslRate, SslFrontendMaxKeyRate and SslBackendMaxKeyRate when
clear counters is used, it was probably forgotten when those counters were
added.
[wt: this can probably be backported as far as 1.5 in dumpstats.c]
When the server weight is rised using the CLI, extra nodes have to be
allocated, or the weight will be effectively the same as the original one.
[wt: given that the doc made no explicit mention about this limitation,
this patch could even be backported as it fixes an unexpected behaviour]
Since around 1.5-dev12, we've been setting MSG_MORE on send() on various
conditions, including the fact that SHUTW_NOW is present, but we don't
check that it's accompanied with AUTO_CLOSE. The result is that on requests
immediately followed by a close (where AUTO_CLOSE is not set), the request
gets delayed in the TCP stack before being sent to the server. This is
visible with the H2 code where the end-of-stream flag is set on requests,
but probably happens when a POLL_HUP is detected along with the request.
The (lack of) presence of option abortonclose has no effect here since we
never send the SHUTW along with the request.
This fix can be backported to 1.7, 1.6 and 1.5.
The hour part of the timezone offset was multiplied by 60 instead of
3600, resulting in an inaccurate expiry. This bug was introduced in
1.6-dev1 by commit 4f3c87a ("BUG/MEDIUM: ssl: Fix to not serve expired
OCSP responses."), so this fix must be backported into 1.7 and 1.6.
In order to prepare multi-thread development, code was re-worked
to propagate changes asynchronoulsy.
Servers with pending status changes are registered in a list
and this one is processed and emptied only once 'run poll' loop.
Operational status changes are performed before administrative
status changes.
In a case of multiple operational status change or admin status
change in the same 'run poll' loop iteration, those changes are
merged to reach only the targeted status.
When using haproxy in front of distccd, it's possible to provide significant
improvements by only connecting when the preprocessing is completed, and by
selecting different farms depending on the payload size. This patch provides
two new sample fetch functions :
distcc_param(<token>[,<occ>]) : integer
distcc_body(<token>[,<occ>]) : binary
srv_queue([<backend>/]<server>) : integer
Returns an integer value corresponding to the number of connections currently
pending in the designated server's queue. If <backend> is omitted, then the
server is looked up in the current backend. It can sometimes be used together
with the "use-server" directive to force to use a known faster server when it
is not much loaded. See also the "srv_conn", "avg_queue" and "queue" sample
fetch methods.
Commit bcb86ab ("MINOR: session: add a streams field to the session
struct") added this list of streams that is not needed anymore. Let's
get rid of it now.
The warning appears when building with 51Degrees release that uses a new
Hash Trie algorithm (release version 3.2.12.12):
src/51d.c: In function init_51degrees:
src/51d.c:566:2: warning: enumeration value DATA_SET_INIT_STATUS_TOO_MANY_OPEN_FILES not handled in switch [-Wswitch]
switch (_51d_dataset_status) {
^
This patch can be backported in 1.7.
When
1) HAProxy configured to enable splice on both directions
2) After some high load, there are 2 input channels with their socket buffer
being non-empty and pipe being full at the same time, sitting in `fd_cache`
without any other fds.
The 2 channels will repeatedly be stopped for receiving (pipe full) and waken
for receiving (data in socket), thus getting out and in of `fd_cache`, making
their fd swapping location in `fd_cache`.
There is a `if (entry < fd_cache_num && fd_cache[entry] != fd) continue;`
statement in `fd_process_cached_events` to prevent frequent polling, but since
the only 2 fds are constantly swapping location, `fd_cache[entry] != fd` will
always hold true, thus HAProxy can't make any progress.
The root cause of the issue is dual :
- there is a single fd_cache, for next events and for the ones being
processed, while using two distinct arrays would avoid the problem.
- the write side of the stream interface wakes the read side up even
when it couldn't write, and this one really is a bug.
Due to CF_WRITE_PARTIAL not being cleared during fast forwarding, a failed
send() attempt will still cause ->chk_rcv() to be called on the other side,
re-creating an entry for its connection fd in the cache, causing the same
sequence to be repeated indefinitely without any opportunity to make progress.
CF_WRITE_PARTIAL used to be used for what is present in these tests : check
if a recent write operation was performed. It's part of the CF_WRITE_ACTIVITY
set and is tested to check if timeouts need to be updated. It's also used to
detect if a failed connect() may be retried.
What this patch does is use CF_WROTE_DATA() to check for a successful write
for connection retransmits, and to clear CF_WRITE_PARTIAL before preparing
to send in stream_int_notify(). This way, timeouts are still updated each
time a write succeeds, but chk_rcv() won't be called anymore after a failed
write.
It seems the fix is required all the way down to 1.5.
Without this patch, the only workaround at this point is to disable splicing
in at least one direction. Strictly speaking, splicing is not absolutely
required, as regular forwarding could theorically cause the issue to happen
if the timing is appropriate, but in practice it appears impossible to
reproduce it without splicing, and even with splicing it may vary.
The following config manages to reproduce it after a few attempts (haproxy
going 100% CPU and having to be killed) :
global
maxpipes 50000
maxconn 10000
listen srv1
option splice-request
option splice-response
bind :8001
server s1 127.0.0.1:8002
server$ tcploop 8002 L N20 A R10 S1000000 R10 S1000000 R10 S1000000 R10 S1000000 R10 S1000000
client$ tcploop 8001 N20 C T S1000000 R10 J
url_dec sample converter uses url_decode function to decode an URL. This
function fails by returning -1 when an invalid character is found. But the
sample converter never checked the return value and it used it as length for the
decoded string. Because it always succeeded, the invalid sample (with a string
length set to -1) could be used by other sample fetches or sample converters,
leading to undefined behavior like segfault.
The fix is pretty simple, url_dec sample converter just needs to return an error
when url_decode fails.
This patch must be backported in 1.7 and 1.6.
I misplaced the "if (!fdt.owner)" test so it can occasionally crash
when dumping an fd that's already been closed but still appears in
the table. It's not critical since this was not pushed into any
release nor backported though.
Health check currently cheat, they allocate a connection upon startup and never
release it, it's only recycled. The problem with doing this is that this code
is preventing the connection code from evolving towards multiplexing.
This code ensures that it's safe for the checks to run without a connection
all the time. Given that the code heavily relies on CO_FL_ERROR to signal
check errors, it is not trivial but in practice this is the principle adopted
here :
- the connection is not allocated anymore on startup
- new checks are not supposed to have a connection, so an attempt is made
to allocate this connection in the check task's context. If it fails,
the check is aborted on a resource error, and the rare code on this path
verifying the connection was adjusted to check for its existence (in
practice, avoid to close it)
- returning checks necessarily have a valid connection (which may possibly
be closed).
- a "tcp-check connect" rule tries to allocate a new connection before
releasing the previous one (but after closing it), so that if it fails,
it still keeps the previous connection in a closed state. This ensures
a connection is always valid here
Now it works well on all tested cases (regular and TCP checks, even with
multiple reconnections), including when the connection is forced to NULL or
randomly allocated.
The tcp-checks are very fragile. They can modify a connection's FD by
closing and reopening a socket without informing the connection layer,
which may then possibly touch the wrong fd. Given that the events are
only cleared and that the fd is just created, there should be no visible
side effect because the old fd is deleted so even if its flags get cleared
they were already, and the new fd already has them cleared as well so it's
a NOP. Regardless, this is too fragile and will not resist to threads.
In order to address this situation, this patch makes tcpcheck_main()
indicate if it closed a connection and report it to wake_srv_chk(), which
will then report it to the connection's fd handler so that it refrains
from updating the connection polling and the fd. Instead the connection
polling status is updated in the wake() function.
When tcp-checks are in use, a connection starts to be created, then it's
destroyed so that tcp-check can recreate its own. Now we directly move
to tcpcheck_main() when it's detected that tcp-check is in use.
The following config :
backend tcp9000
option tcp-check
tcp-check comment "this is a comment"
tcp-check connect port 10000
server srv 127.0.0.1:9000 check inter 1s
will result in a connection being first made to port 9000 then immediately
destroyed and re-created on port 10000, because the first rule is a comment
and doesn't match the test for the first rule being a connect(). It's
mostly harmless (unless the server really must not receive empty
connections) and the workaround simply consists in removing the comment.
Let's proceed like in other places where we simply skip leading comments.
A new function was made to make this lookup les boring. The fix should be
backported to 1.7 and 1.6.
Since this connection is not used at all anymore, do not allocate it.
It was verified that check successes and failures (both synchronous
and asynchronous) continue to be properly reported.
Upon fork() error, a first report is immediately made by connect_proc_chk()
via set_server_check_status(), then process_chk_proc() detects the error
code and makes up a dummy connection error to call chk_report_conn_err(),
which tries to retrieve the errno code from the connection, fails, then
saves the status message from the check, fails all "if" tests on its path
related to the connection then resets the check's state to the current one
with the current status message. All this useless chain is the only reason
why process checks require a connection! Let's simply get rid of this second
useless call.
The external process check code abused a little bit from copy-pasting to
the point of making think it requires a connection... The initialization
code only returns SF_ERR_NONE and SF_ERR_RESOURCE, so the other one can
be folded there. The code now only uses the connection to report the
error status.
Amazingly, this function takes a connection to report an error and is used
by process checks, placing a hard dependency between the connection and the
check preventing the mux from being completely implemented. Let's first get
rid of this.
A config containing "stats socket /path/to/socket mode admin" used to
silently start and be unusable (mode 0, level user) because the "mode"
parser doesn't take care of non-digits. Now it properly reports :
[ALERT] 276/144303 (7019) : parsing [ext-check.cfg:4] : 'stats socket' : ''mode' : missing or invalid mode 'admin' (octal integer expected)'
This can probably be backported to 1.7, 1.6 and 1.5, though reporting
parsing errors in very old versions probably isn't a good idea if the
feature was left unused for years.
This function can destroy a socket and create a new one, resulting in a
change of FD on the connection between recv() and send() for example,
which is absolutely not permitted, and can result in various funny games
like polling not being properly updated (or with the flags from a previous
fd) etc.
Let's only call this from the wake() callback which is more tolerant.
Ideally the operations should be made even more reliable by returning
a specific value to indicate that the connection was released and that
another one was created. But this is hasardous for stable releases as
it may reveal other issues.
This fix should be backported to 1.7 and 1.6.
In the rare case where the "tcp-check send" directive is the last one in
the list, it leaves the loop without sending the data. Fortunately, the
polling is still enabled on output, resulting in the connection handler
calling back to send what remains, but this is ugly and not very reliable.
This may be backported to 1.7 and 1.6.
While porting the connection to use the mux layer, it appeared that
tcp-checks wouldn't receive anymore because the polling is not enabled
before attempting to call xprt->rcv_buf() nor xprt->snd_buf(), and it
is illegal to call these functions with polling disabled as they
directly manipulate the FD state, resulting in an inconsistency where
the FD is enabled and the connection's polling flags disabled.
Till now it happened to work only because when recv() fails on EAGAIN
it calls fd_cant_recv() which enables polling while signaling the
failure, so that next time the message is received. But the connection's
polling is never enabled, and any tiny change resulting in a call to
conn_data_update_polling() immediately disables reading again.
It's likely that this problem already happens on some corner cases
such as multi-packet responses. It definitely breaks as soon as the
response buffer is full but we don't support consuming more than one
response buffer.
This fix should be backported to 1.7 and 1.6. In order to check for the
proper behaviour, this tcp-check must work and clearly show an SSH
banner in recvfrom() as observed under strace, otherwise it's broken :
tcp-check connect port 22
tcp-check expect rstring SSH
tcp-check send blah
This used to be needed to know whether there was a check in progress a
long time ago (before tcp_checks) but this is not true anymore and even
becomes wrong after the check is reused as conn_init() initializes it
to DEAD_FD_MAGIC.
A regression has been introduced in commit
00005ce5a14310d248c9f20af9ef258d245d43b1: the port being changed is the
one from 'cli_conn->addr.from' instead of 'cli_conn->addr.to'.
This patch fixes the regression.
Backport status: should be backported to HAProxy 1.7 and above.
Leaving the maintenance state and if the server remains in stopping mode due
to a tracked one:
- We mistakenly try to grab some pending conns and shutdown backup sessions.
- The proxy down time and last change were also mistakenly updated
This patch adds the ability to read from a wrapping memory area (ie:
buffers). The new functions are called "readv_<type>". The original
ones were renamed to start with "read_" to make the difference more
obvious between the read method and the returned type.
It's worth noting that the memory barrier in readv_bytes() is critical,
as otherwise gcc decides that it doesn't need the resulting data, but
even worse, removes the length checks in readv_u64() and happily
performs an out-of-bounds unaligned read using read_u64()! Such
"optimizations" are a bit borderline, especially when they impact
security like this...
snr_resolution_cb can be called with <nameserver> parameter set to NULL. So we
must check it before using it. This is done most of time, except when we deal
with invalid DNS response.
The check was totally messed up. In the worse case, it led to a crash, when
res.comp_algo sample fetch was retrieved on uncompressed response (with the
compression enabled).
This patch must be backported in 1.7.
