Now that the appctx contains the master level, it greatly simplifies
all the tests, as we can simply verify that keyword levels match the
effective level without having to cheat with applet pointers. This
also allows to fold the expert test in them.
Right now the code is a bit hackish, it tests for the keyword's level
flags but checks the applet's origin to compare the bits. Let's start
by properly setting the ACCESS_MASTER_ONLY and ACCESS_MASTER flags on
the master CLI's bind_conf so that they are automatically present
all the time.
It was mentioned that ACCESS_MASTER_ONLY as for workers only instead of
master-only. And it wasn't clear that all ACCESS_* would belong to the
same thing.
These 3 commands are functionally valid both in master and worker CLIs.
However, while they do have a valid handler, they are not permitted by
the code and work partially by chance in the master:
- "prompt" and "quit" are intercepted by the request analyser
- "help" triggers an error, which results in displaying the error
message
Let's make sure they are permitted so that we don't count errors there and
that we can report appropriate help.
This bug has always been there but it doesn't have any functional effect
at the moment since "help" can only show the error message. As such, there
is no need to backport it.
The loop looking for existing ADD items to renew their last_seen must ignore
the items already renewed in the same loop. To do so, we rely on the
last_seen time. because it is now based on now_ms, it is safe.
Doing so avoid to match several time the same ADD item when the same IP
address is found in several ADD item. This reduces the number of extra DNS
resolutions.
This patch depends on "MINOR: resolvers: Use milliseconds for cached items
in resolver responses". Both may be backported as far as 2.2 if necessary.
The last time when an item was seen in a resolver responses is now stored in
milliseconds instead of seconds. This avoid some corner-cases at the
edges. This also simplifies time comparisons.
At startup, if a SRV resolution is set for a server, no DNS resolution is
created. We must wait the first SRV resolution to know if it must be
triggered. It is important to do so for two reasons.
First, during a "classical" startup, a server based on a SRV resolution has
no hostname. Thus the created DNS resolution is useless. Best waiting the
first SRV resolution. It is not really a bug at this stage, it is just
useless.
Second, in the same situation, if the server state is loaded from a file,
its hosname will be set a bit later. Thus, if there is no additionnal record
for this server, because there is already a DNS resolution, it inhibits any
new DNS resolution. But there is no hostname attached to the existing DNS
resolution. So no resolution is performed at all for this server.
To avoid any problem, it is fairly easier to handle this special case during
startup. But this means we must be prepared to have no "resolv_requester"
field for a server at runtime.
This patch must be backported as far as 2.2.
Another way to say it: "Safely unlink requester from a requester callbacks".
Requester callbacks must never try to unlink a requester from a resolution, for
the current requester or another one. First, these callback functions are called
in a loop on a request list, not necessarily safe. Thus unlink resolution at
this place, may be unsafe. And it is useless to try to make these loops safe
because, all this stuff is placed in a loop on a resolution list. Unlink a
requester may lead to release a resolution if it is the last requester.
However, the unkink is necessary because we cannot reset the server state
(hostname and IP) with some pending DNS resolution on it. So, to workaround
this issue, we introduce the "safe" unlink. It is only performed from a
requester callback. In this case, the unlink function never releases the
resolution, it only reset it if necessary. And when a resolution is found
with an empty requester list, it is released.
This patch depends on the following commits :
* MINOR: resolvers: Purge answer items when a SRV resolution triggers an error
* MINOR: resolvers: Use a function to remove answers attached to a resolution
* MINOR: resolvers: Directly call srvrq_update_srv_state() when possible
* MINOR: resolvers: Add function to change the srv status based on SRV resolution
All the series must be backported as far as 2.2. It fixes a regression
introduced by the commit b4badf720 ("BUG/MINOR: resolvers: new callback to
properly handle SRV record errors").
don't release resolution from requester cb
When the server status must be updated from the result of a SRV resolution,
we can directly call srvrq_update_srv_state(). It is simpler and this avoid
a test on the server DNS resolution.
This patch is mandatory for the next commit. It also rely on "MINOR:
resolvers: Directly call srvrq_update_srv_state() when possible".
srvrq_update_srv_status() update the server status based on result of SRV
resolution. For now, it is only used from snr_update_srv_status() when
appropriate.
When a SRV request trigger an error, if we decide to handle the error
because last_valid duration is expired, the answer list may be purged. All
items are considered as obsolete.
resolv_purge_resolution_answer_records() must be used to removed all answers
attached to a resolution. For now, it is only used when a resolution is
released.
When a ADD item attached to a SRV item is removed because it is obsolete, we
must trigger a DNS resolution to be sure the hostname still resolves or
not. There is no other way to be the entry is still valid. And we cannot set
the server in RMAINT immediatly, because a DNS server may be inconsitent and
may stop to add some additionnal records.
The opposite is also true. If a valid ADD item is still attached to a SRV
item, any DNS resolution must be stopped. There is no reason to perform
extra resolution in this case.
This patch must be backported as far as 2.2.
If no ADD item is found for a SRV item in a SRV response, a DNS resolution
is triggered. When it succeeds, we must be sure the SRV item is still
alive. Otherwise the DNS resolution must be ignored.
This patch depends on the commit "MINOR: resolvers: Move last_seen time of
an ADD into its corresponding SRV item". Both must be backported as far as
2.2.
This function search for a SRV answer item associated to a requester
whose type is server.
This is mainly useful to "link" a server to its SRV record when no
additional record were found to configure the IP address.
This patch is required by a bug fix.
For each ADD item found in a SRV response, we try to find a corresponding
ADD item already attached to an existing SRV item. If found, the ADD
last_seen time is updated, otherwise we try to find a SRV item with no ADD
to attached the new one.
However, the loop is buggy. Instead of comparing 2 ADD items, it compares
the new ADD item with the SRV item. Because of this bug, we are unable to
renew last_seen time of existing ADD.
This patch must be backported as far as 2.2.
when a server status is updated based on a SRV item, it is always set to UP,
regardless it has an IP address defined or not. For instance, if only a SRV
item is received, with no additional record, only the server hostname is
defined. We must wait to have an IP address to set the server as UP.
This patch must be backported as far as 2.2.
When a server is set in RMAINT becaues of a SRV resolution failure, the
server DNS resolution, if any, must be unlink first. It is mandatory to
handle the change in the context of a SRV resolution.
This patch must be backported as far as 2.2.
When a DNS resolution error is detected, in snr_resolution_error_cb(), the
server address must be reset only if the server status has changed. It this
case, it means the server is set to RMAINT. Thus the server address may by
reset.
This patch fixes a bug introduced by commit d127ffa9f ("BUG/MEDIUM:
resolvers: Reset address for unresolved servers"). It must be backported as
far as 2.0.
When an error is received for a DNS resolution, for instance a NXDOMAIN
error, the server must be considered to have no address when its status is
updated, not the opposite.
Concretly, because this parameter is not used on error path in
snr_update_srv_status(), there is no impact.
This patch must be backported as far as 1.8.
This reverts commit a331a1e8eb2ad4750711a477ca3e22d940495faf.
This commit fixes a real bug, but it also reveals some hidden bugs, mostly
because of some design issues. Thus, in itself, it create more problem than
it solves. So revert it for now. All known bugs will be addressed in next
commits.
This patch should be backported as far as 2.2.
This was introduced in previous commit 49c2b45c1 ("MINOR: cfgparse/server:
try to fix spelling mistakes on server lines"), the loop was changed but
the increment left. No backport is needed.
This adds support for action_suggest() in http-request, http-response
and http-after-response rulesets. For example:
parsing [/dev/stdin:2]: 'http-request' expects (...), but got 'del-hdr'. Did you mean 'del-header' maybe ?
action_suggest() will return a pointer to an action whose keyword more or
less ressembles the passed argument. It also accepts to be more tolerant
against prefixes (since actions taking arguments are handled as prefixes).
This will be used to suggest approaching words.
Just like with the server keywords, now's the turn of "bind" keywords.
The difference is that 100% of the bind keywords are registered, thus
we do not need the list of extra keywords.
There are multiple bind line parsers today, all were updated:
- peers
- log
- dgram-bind
- cli
$ printf "listen f\nbind :8000 tcut\n" | ./haproxy -c -f /dev/stdin
[NOTICE] 070/101358 (25146) : haproxy version is 2.4-dev11-7b8787-26
[NOTICE] 070/101358 (25146) : path to executable is ./haproxy
[ALERT] 070/101358 (25146) : parsing [/dev/stdin:2] : 'bind :8000' unknown keyword 'tcut'; did you mean 'tcp-ut' maybe ?
[ALERT] 070/101358 (25146) : Error(s) found in configuration file : /dev/stdin
[ALERT] 070/101358 (25146) : Fatal errors found in configuration.
Let's apply the fuzzy match to server keywords so that we can avoid
dumping the huge list of supported keywords each time there is a spelling
mistake, and suggest proper spelling instead:
$ printf "listen f\nserver s 0 sendpx-v2\n" | ./haproxy -c -f /dev/stdin
[NOTICE] 070/095718 (24152) : haproxy version is 2.4-dev11-caa6e3-25
[NOTICE] 070/095718 (24152) : path to executable is ./haproxy
[ALERT] 070/095718 (24152) : parsing [/dev/stdin:2] : 'server s' unknown keyword 'sendpx-v2'; did you mean 'send-proxy-v2' maybe ?
[ALERT] 070/095718 (24152) : Error(s) found in configuration file : /dev/stdin
[ALERT] 070/095718 (24152) : Fatal errors found in configuration.
The global section also knows a large number of keywords that are not
referenced in any list, so this needed them to be specifically listed.
It becomes particularly handy now because some tunables are never easy
to remember, but now it works remarkably well:
$ printf "global\nsched.queue_depth\n" | ./haproxy -c -f /dev/stdin
[NOTICE] 070/093007 (23457) : haproxy version is 2.4-dev11-dd8ee5-24
[NOTICE] 070/093007 (23457) : path to executable is ./haproxy
[ALERT] 070/093007 (23457) : parsing [/dev/stdin:2] : unknown keyword 'sched.queue_depth' in 'global' section; did you mean 'tune.runqueue-depth' maybe ?
[ALERT] 070/093007 (23457) : Error(s) found in configuration file : /dev/stdin
[ALERT] 070/093007 (23457) : Fatal errors found in configuration.
Let's start by the largest keyword list, the listeners. Many keywords were
still not part of a list, so a common_kw_list array was added to list the
not enumerated ones. Now for example, typing "tmout" properly suggests
"timeout":
$ printf "frontend f\ntmout client 10s\n" | ./haproxy -c -f /dev/stdin
[NOTICE] 070/091355 (22545) : haproxy version is 2.4-dev11-3b728a-21
[NOTICE] 070/091355 (22545) : path to executable is ./haproxy
[ALERT] 070/091355 (22545) : parsing [/dev/stdin:2] : unknown keyword 'tmout' in 'frontend' section; did you mean 'timeout' maybe ?
[ALERT] 070/091355 (22545) : Error(s) found in configuration file : /dev/stdin
[ALERT] 070/091355 (22545) : Fatal errors found in configuration.
Instead of just reporting "unknown keyword", let's provide a function which
will look through a list of registered keywords for a similar-looking word
to the one that wasn't matched. This will help callers suggest correct
spelling. Also, given that a large part of the config parser still relies
on a long chain of strcmp(), we'll need to be able to pass extra candidates.
Thus the function supports an optional extra list for this purpose.
This introduces two functions, one which creates a fingerprint of a word,
and one which computes a distance between two words fingerprints. The
fingerprint is made by counting the transitions between one character and
another one. Here we consider the 26 alphabetic letters regardless of
their case, then any digit as a digit, and anything else as "other". We
also consider the first and last locations as transitions from begin to
first char, and last char to end. The distance is simply the sum of the
squares of the differences between two fingerprints. This way, doubling/
missing a letter has the same cost, however some repeated transitions
such as "e"->"r" like in "server" are very unlikely to match against
situations where they do not exist. This is a naive approach but it seems
to work sufficiently well for now. It may be refined in the future if
needed.
The error message for http-request and http-response starts with a comma
that very likely is a leftover from a previous list construct. Let's remove
it: "'http-request' expects , 'wait-for-handshake', 'use-service' ...".
The error message after "http-response set-var" isn't very clear:
[ALERT] 070/115043 (30526) : parsing [/dev/stdin:2] : error detected in proxy 'f' while parsing 'http-response set-var' rule : invalid variable 'set-var'. Expects 'set-var(<var-name>)' or 'unset-var(<var-name>)'.
Let's change it to this instead:
[ALERT] 070/115608 (30799) : parsing [/dev/stdin:2] : error detected in proxy 'f' while parsing 'http-response set-var' rule : invalid or incomplete action 'set-var'. Expects 'set-var(<var-name>)' or 'unset-var(<var-name>)'.
With a wrong action name, it also works better (it's handled as a prefix
due to the opening parenthesis):
[ALERT] 070/115608 (30799) : parsing [/dev/stdin:2] : error detected in proxy 'f' while parsing 'http-response set-varxxx' rule : invalid or incomplete action 'set-varxxx'. Expects 'set-var(<var-name>)' or 'unset-var(<var-name>)'.
The tcp-request error message only mentions "accept", "reject" and
track-sc*, but there are a few other ones that were missing, so let's
add them.
This could be backported, though it's not likely that it will help anyone
with an existing config.
The refactoring in commit 131b07be3 ("MEDIUM: server: Refactor
apply_server_state() to make it more readable") also had a copy-paste
error resulting in using global.server_state_file instead of the
function's argument, which easily crashes with a conf having a
state file in a backend and no global state file.
In addition, let's simplify the code and get rid of strcpy() which
almost certainly will break the build on OpenBSD.
This was introduced in 2.4-dev10, no backport is needed.
The refactoring in commit 131b07be3 ("MEDIUM: server: Refactor
apply_server_state() to make it more readable") made the global
server_state_base be dereferenced before being checked, resulting
in a crash on certain files.
This happened in 2.4-dev10, no backport is needed.
When a "tcp-check" or a "http-check" rule is parsed, we try to get the
previous rule in the ruleset to get its index. We must take care to reset
the pointer on this rule in case an error is triggered later on the
parsing. Otherwise, the same rule may be released twice. For instance, it
happens with such line :
http-check meth GET uri / ## note there is no "send" parameter
This patch must be backported as far as 2.2.
It is possible to have a session without a listener. It happens for applets
on the client side. Thus all accesses to the listener info from the session
must be guarded. It was the purpose of the commit 36119de18 ("BUG/MEDIUM:
session: NULL dereference possible when accessing the listener"). However,
some tests on the session's listener existence are missing in proxy_inc_*
functions.
This patch should fix the issues #1171, #1172, #1173, #1174 and #1175. It
must be backported with the above commit as far as 1.8.
If an agent-check is configured for a server, When the response is parsed,
the .health threshold of the agent must be updated on up/down/stopped/fail
command and not the threshold of the health-check. Otherwise, the
agent-check will compete with the health-check and may mark a DOWN server as
UP.
This patch should fix the issue #1176. It must be backported as far as 2.2.
CF_FL_ANALYZE flag is used to know a channel is filtered. It is important to
synchronize request and response channels when the filtering ends.
However, it is possible to call all request analyzers before starting the
filtering on the response channel. This means flt_end_analyze() may be
called for the request channel before flt_start_analyze() on the response
channel. Thus because CF_FL_ANALYZE flag is not set on the response channel,
we consider the filtering is finished on both sides. The consequence is that
flt_end_analyze() is not called for the response and backend filters are
unregistered before their execution on the response channel.
It is possible to encounter this bug on TCP frontend or CONNECT request on
HTTP frontend if the client shutdown is reveiced with the first read.
To fix this bug, CF_FL_ANALYZE is set when filters are attached to the
stream. It means, on the request channel when the stream is created, in
flt_stream_start(). And on both channels when the backend is set, in
flt_set_stream_backend().
This patch must be backported as far as 1.7.
Since commit f8fb4f75f ("MINOR: atomic: implement a more efficient arm64
__ha_cas_dw() using pairs"), on some modern arm64 (armv8.1+) compiled
with -march=armv8.1-a under gcc-7.5.0, a build error may appear on ev_poll.o :
/tmp/ccHD2lN8.s:1771: Error: reg pair must start from even reg at operand 1 -- `casp x27,x28,x22,x23,[x12]'
Makefile:927: recipe for target 'src/ev_poll.o' failed
It appears that the compiler cannot always assign register pairs there
for a structure made of two u64. It was possibly later addressed since
gcc-9.3 never caused this, but there's no trivially available info on
the subject in the changelogs. Unsuprizingly, using a u128 instead does
fix this, but it significantly inflates the code (+4kB for just 6 places,
very likely that it loaded some extra stubs) and the comparison is ugly,
involving two slower conditional jumps instead of a single one and a
conditional comparison. For example, ha_random64() grew from 144 bytes
to 232.
However, simply forcing the base register does work pretty well, and
makes the code even cleaner and more efficient by further reducing it
by about 4.5kB, possibly because it helps the compiler to pick suitable
registers for the pair there. And the perf on 64-cores looks steadily
0.5% above the previous one, so let's do this.
Note that the commit above was backported to 2.3 to fix scalability
issues on AWS Graviton2 platform, so this one will need to be as well.
Setting multiple http-request track-scX rules generates entries
which never expires.
If there was already an entry registered by a previous http rule
'stream_track_stkctr(&s->stkctr[rule->action], t, ts)' didn't
register the new 'ts' into the stkctr. And function is left
with no reference on 'ts' whereas refcount had been increased
by the '_get_entry'
The patch applies the same policy as the one showed on tcp track
rules and if there is successive rules the track counter keep the
first entry registered in the counter and nothing more is computed.
After validation this should be backported in all versions.
The QUIC connection struct connection member was not initialized. This may
make randomly haproxy handle TLS connections as QUIC ones only when QUIC support
is enabled leading to such OpenSSL errors (captured from a reg test output, TLS
Client-Hello callback failed):
OpenSSL error[0x10000085] OPENSSL_internal: CONNECTION_REJECTED
OpenSSL error[0x10000410] OPENSSL_internal: SSLV3_ALERT_HANDSHAKE_FAILURE
OpenSSL error[0x1000009a] OPENSSL_internal: HANDSHAKE_FAILURE_ON_CLIENT_HELLO
This patch should fix#1168 github issue.
The recent default runqueue size reduction appeared to have significantly
lowered performance on low-thread count configs. Testing various values
runqueue values on different workloads under thread counts ranging from
1 to 64, it appeared that lower values are more optimal for high thread
counts and conversely. It could even be drawn that the optimal value for
various workloads sits around 280/sqrt(nbthread), and probably has to do
with both the L3 cache usage and how to optimally interlace the threads'
activity to minimize contention. This is much easier to optimally
configure, so let's do this by default now.
Instead of setting a hard-limit on runqueue-depth and keeping it short
to maintain fairness, let's allow the scheduler to automatically cut
the existing one in two equal halves if its size is between the configured
size and its double. This will allow to increase the default value while
keeping a low latency.
The recently introduced Financial Information eXchange (FIX)
converters have some hard coded tags based on the specification that
were misspelled. Specifically, SenderComID and TargetComID should
be SenderCompID and TargetCompID according to the specification [1][2].
This patch updates all references, which includes the converters
themselves, the regression test, and the documentation.
[1] https://fiximate.fixtrading.org/en/FIX.5.0SP2_EP264/tag49.html
[2] https://fiximate.fixtrading.org/en/FIX.5.0SP2_EP264/tag56.html
Emeric found that SSL+keepalive traffic had dropped quite a bit in the
recent changes, which could be bisected to recent commit 9205ab31d
("MINOR: ssl: mark the SSL handshake tasklet as heavy"). Indeed, a
first incarnation of this commit made use of the TASK_SELF_WAKING
flag but the last version directly used TASK_HEAVY, but it would still
continue to remove the already absent TASK_SELF_WAKING one instead of
TASK_HEAVY. As such, the SSL traffic remained processed with low
granularity.
No backport is needed as this is only 2.4.
