One was in backend.c and the other one in hlua.c. No other candidate
was found with "git grep '^#if\s*USE'". It's worth noting that 3
other such tests exist for SSL_OP_NO_{SSLv3,TLSv1_1,TLSv1_2} but
that these ones are properly set to 0 in openssl-compat.h when not
defined.
The condition should first check whether `bsize` is reached, before
dereferencing the offset. Even if this always works fine, due to the
string being null-terminated, this certainly looks odd.
Found using GitHub's CodeQL scan.
This bug traces back to at least 97c2ae13bc0d7961a348102d6719fbcaf34d46d5
(1.7.0+) and this patch should be backported accordingly.
Using localtime / gmtime is not thread-safe, whereas the `get_*` wrappers are.
Found using GitHub's CodeQL scan.
The use in sample_conv_ltime() can be traced back to at least
fac9ccfb705702f211f99e67d5f5d5129002086a (first appearing in 1.6-dev3), so all
supported branches with thread support are affected.
The test on FIND_OPTIMAL_MATCH for the experimental code can yield a
build warning when using -Wundef, let's turn it into a regular ifdef.
This is slz upstream commit 05630ae8f22b71022803809eb1e7deb707bb30fb
Before threads were introduced in 1.8, idle_pct used to be a global
variable indicating the overall process idle time. Threads made it
thread-local, meaning that its reporting in the stats made little
sense, though this was not easy to spot. In 2.0, the idle_pct variable
moved to the struct thread_info via commit 81036f273 ("MINOR: time:
move the cpu, mono, and idle time to thread_info"). It made it more
obvious that the idle_pct was per thread, and also allowed to more
accurately measure it. But no more effort was made in that direction.
This patch introduces a new report_idle() function that accurately
averages the per-thread idle time over all running threads (i.e. it
should remain valid even if some threads are paused or stopped), and
makes use of it in the stats / "show info" reports.
Sending traffic over only two connections of an 8-thread process
would previously show this erratic CPU usage pattern:
$ while :; do socat /tmp/sock1 - <<< "show info"|grep ^Idle;sleep 0.1;done
Idle_pct: 30
Idle_pct: 35
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 35
Idle_pct: 33
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Idle_pct: 100
Now it shows this more accurate measurement:
$ while :; do socat /tmp/sock1 - <<< "show info"|grep ^Idle;sleep 0.1;done
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
Idle_pct: 83
This is not technically a bug but this lack of precision definitely affects
some users who rely on the idle_pct measurement. This should at least be
backported to 2.4, and might be to some older releases depending on users
demand.
To be able to provide JA3 compatible TLS Fingerprints we need to expose
all Client Hello captured data using fetchers. Patch provides new
and modifies existing fetchers to add ability to filter out GREASE values:
- ssl_fc_cipherlist_*
- ssl_fc_ecformats_bin
- ssl_fc_eclist_bin
- ssl_fc_extlist_bin
- ssl_fc_protocol_hello_id
When we set tune.ssl.capture-cipherlist-size to a non-zero value
we are able to capture cipherlist supported by the client. To be able to
provide JA3 compatible TLS fingerprinting we need to capture more
information from Client Hello message:
- SSL Version
- SSL Extensions
- Elliptic Curves
- Elliptic Curve Point Formats
This patch allows HAProxy to capture such information and store it for
later use.
The lua initialization code which creates the Lua mapping of all converters
and sample fetch keywords makes use of strncpy(), and as such can take ages
to start with large values of tune.bufsize because it spends its time zeroing
gigabytes of memory for nothing. A test performed with an extreme value of
16 MB takes roughly 4 seconds, so it's possible that some users with huge
1 MB buffers (e.g. for payload analysis) notice a small startup latency.
However this does not affect config checks since the Lua stack is not yet
started. Let's replace this with strlcpy2().
This should be backported to all supported versions.
When a server is configured with name-resolution, resolvers objects are
created with reference to this server. Thus the server is marked as non
purgeable to prevent its removal at runtime.
This does not need to be backport.
Patch 211c967 ("MINOR: httpclient: add the server to the proxy") broke
the reg-tests that do a "show servers state".
Indeed the servers of the proxies flagged with PR_CAP_INT are dumped in
the output of this CLI command.
This patch fixes the issue par ignoring the PR_CA_INT proxies in the
dump.
Without this fix, the decode function would proceed even when the output
buffer is not large enough, because the padding was not considered. For
example, it would not fail with the input length of 23 and the output
buffer size of 15, even the actual decoded output size is 17.
This patch should be backported to all stable branches that have a
base64urldec() function available.
Relax the condition on "delete server" CLI handler to be able to remove
all servers, even non dynamic, except if they are flagged as non
purgeable.
This change is necessary to extend the use cases for dynamic servers
with reload. It's expected that each dynamic server created via the CLI
is manually commited in the haproxy configuration by the user. Dynamic
servers will be present on reload only if they are present in the
configuration file. This means that non-dynamic servers must be allowed
to be removable at runtime.
The dynamic servers removal reg-test has been updated and renamed to
reflect its purpose. A new test is present to check that non-purgeable
servers cannot be removed.
Mark servers that are referenced by configuration elements as non
purgeable. This includes the following list :
- tracked servers
- servers referenced in a use-server rule
- servers referenced in a sample fetch
In a future patch, it will be possible to remove at runtime every
servers, both static and dynamic. This requires to extend the server
refcount for all instances.
First, refcount manipulation functions have been renamed to better
express the API usage.
* srv_refcount_use -> srv_take
The refcount is always initialize to 1 on the server creation in
new_server. It's also incremented for each check/agent configured on a
server instance.
* free_server -> srv_drop
This decrements the refcount and if null, the server is freed, so code
calling it must not use the server reference after it. As a bonus, this
function now returns the next server instance. This is useful when
calling on the server loop without having to save the next pointer
before each invocation.
In these functions, remove the checks that prevent refcount on
non-dynamic servers. Each reference to "dynamic" in variable/function
naming have been eliminated as well.
A dynamic server may be deleted at runtime at the same moment when the
stats applet is pointing to it. Use the server refcount to prevent
deletion in this case.
This should be backported up to 2.4, with an observability period of 2
weeks. Note that it requires the dynamic server refcounting feature
which has been implemented on 2.5; the following commits are required :
- MINOR: server: implement a refcount for dynamic servers
- BUG/MINOR: server: do not use refcount in free_server in stopping mode
- MINOR: server: return the next srv instance on free_server
As a convenience, return the next server instance from servers list on
free_server.
This is particularily useful when using this function on the servers
list without having to save of the next pointer before calling it.
using the procctl api to set the current process as traceable, thus being able to produce a core dump as well.
making it as compile option if not wished or using freebsd prior to 11.x (last no EOL release).
THe http_update_update_host function takes an URL and extract the domain
to use as a host header. However it only update an existing host header
and does not create one.
This patch add an empty host header so the function can update it.
Add the raw and ssl server to the proxy list so they can be freed during
the deinit() of HAProxy. As a side effect the 2 servers need to have a
different ID so the SSL one was renamed "<HTTPSCLIENT>".
Ensure that no more than olen bytes is written to the output buffer,
otherwise we might experience an unexpected behavior.
While the original code used to validate that the output size was
always large enough before starting to write, this validation was
later broken by the commit below, allowing to 3-byte blocks to
areas whose size is not multiple of 3:
commit ed697e4856e5ac0b9931fd50fd8ff1b7739e5d88
Author: Emeric Brun <ebrun@haproxy.com>
Date: Mon Jan 14 14:38:39 2019 +0100
BUG/MINOR: base64: dec func ignores padding for output size checking
Decode function returns an error even if the ouptut buffer is
large enought because the padding was not considered. This
case was never met with current code base.
For base64urldec(), it's basically the same problem except that since
the input format supports arbitrary lengths, the problem has always
been there since its introduction in 2.4.
This should be backported to all stable branches having a backport of
the patch above (i.e. 2.0), with some adjustments depending on the
availability of the base64dec() and base64urldec().
The httpclient does a free of the servers and proxies it uses, however
since we are including them in the global proxy list, haproxy already
free them during the deinit. We can safely remove these free.
The sc-set-gpt0() parser was extended in 2.1 by commit 0d7712dff ("MINOR:
stick-table: allow sc-set-gpt0 to set value from an expression") to support
sample expressions in addition to plain integers. However there is a
subtlety there, which is that while the arg position must be incremented
when parsing an integer, it must not be touched when calling an expression
since the expression parser already does it.
The effect is that rules making use of sc-set-gpt0() followed by an
expression always ignore one word after that expression, and will typically
fail to parse if followed by an "if" as the parser will restart after the
"if". With no condition it's different because an empty condition doesn't
result in trying to parse anything.
This patch moves the increment at the right place and adds a few
explanations for a code part that was far from being obvious.
This should be backported to branches having the commit above (2.1+).
Implements a way of checking the running openssl version:
If the OpenSSL support was not compiled within HAProxy it will returns a
error, so it's recommanded to do a SSL feature check before:
$ ./haproxy -cc 'feature(OPENSSL) && openssl_version_atleast(0.9.8zh) && openssl_version_before(3.0.0)'
This will allow to select the SSL reg-tests more carefully.
Some users are facing huge CPU usage or even watchdog panics due to
the Lua global lock when many threads compete on it, but they have
no way to see that in the usual dumps. We take the lock at 2 or 3
places only, thus it's trivial to move it to a global function so
that stack dumps will now explicitly show it, increasing the change
that it rings a bell and someone suggests switch to lua-load-per-thread:
Current executing Lua from a stream analyser -- stack traceback:
loop.lua:1: in function line 1
call trace(27):
| 0x5ff157 [48 83 c4 10 5b 5d 41 5c]: wdt_handler+0xf7/0x104
| 0x7fe37fe82690 [48 c7 c0 0f 00 00 00 0f]: libpthread:+0x13690
| 0x614340 [66 48 0f 7e c9 48 01 c2]: main+0x1e8a40
| 0x607b85 [48 83 c4 08 48 89 df 31]: main+0x1dc285
| 0x6070bc [48 8b 44 24 20 48 8b 14]: main+0x1db7bc
| 0x607d37 [41 89 c4 89 44 24 1c 83]: lua_resume+0xc7/0x214
| 0x464ad6 [83 f8 06 0f 87 f1 01 00]: main+0x391d6
| 0x4691a7 [83 f8 06 0f 87 03 20 fc]: main+0x3d8a7
| 0x51dacb [85 c0 74 61 48 8b 5d 20]: sample_process+0x4b/0xf7
| 0x51e55c [48 85 c0 74 3f 64 48 63]: sample_fetch_as_type+0x3c/0x9b
| 0x525613 [48 89 c6 48 85 c0 0f 84]: sess_build_logline+0x2443/0x3cae
| 0x4af0be [4c 63 e8 4c 03 6d 10 4c]: http_apply_redirect_rule+0xbfe/0xdf8
| 0x4af523 [83 f8 01 19 c0 83 e0 03]: main+0x83c23
| 0x4b2326 [83 f8 07 0f 87 99 00 00]: http_process_req_common+0xf6/0x15f6
| 0x4d5b30 [85 c0 0f 85 9f f5 ff ff]: process_stream+0x2010/0x4e18
It also allows "perf top" to directly show the time spent on this lock.
This may be backported to some stable versions as it improves the
overall debuggability.
Include the correct .h files in http_client.c and http_client.h.
The api.h is needed in http_client.c and http_client-t.h is now include
directly from http_client.h
Reported by coverity in ticket #1355
CID 1461505: Memory - illegal accesses (UNINIT)
Using uninitialized value "sl".
Fix the problem by initializing sl to NULL.
Proxies must call proxy_preset_defaults() to initialize their settings
that are usually learned from defaults sections (e.g. connection retries,
pool purge delay etc). At the moment there was likely no impact, but not
doing so could cause trouble soon when using the client more extensively
or when new defaults are introduced and failed to be initialized.
No backport is needed.
Recent commit 83614a9fb ("MINOR: httpclient: initialize the proxy") broke
reg tests that match the output of "show stats" or "show servers state"
because it changed the proxies' numeric ID.
In fact it did nothing wrong, it just registers a proxy and adds it at
the head of the list. But the automatic numbering scheme, which was made
to make sure that temporarily disabled proxies in the config keep their
ID instead of shifting all others, sees one more proxy and increments
next_pxid for all subsequent proxies.
This patch avoids this by not assigning automatic IDs to such internal
proxies, leaving them with their ID of -1, and by not shifting next_pxid
for them. This is important because the user might experience them
appearing or disappearing depending on apparently unrelated config
options or build options, and this must not cause visible proxy IDs
to change (e.g. stats or minitoring may break).
Though the issue has always been there, it only became a problem with
the recent proxy additions so there is no need to backport this.
The X509_STORE_CTX_get0_cert did not exist yet on OpenSSL 1.0.2 and
neither did X509_STORE_CTX_get0_chain, which was not actually needed
since its get1 equivalent already existed.
RFC7540 states that :path follows RFC3986's path-absolute. However
that was a bug introduced in the spec between draft 04 and draft 05
of the spec, which implicitly causes paths starting with "//" to be
forbidden. HTTP/1 (and now HTTP core semantics) made it explicit
that the request-target in origin-form follows a purposely defined
absolute-path defined as 1*(/ segment) to explicitly allow "//".
http2bis now fixes this by relying on absolute-path so that "//"
becomes valid and matches other versions. Full discussion here:
https://lists.w3.org/Archives/Public/ietf-http-wg/2021JulSep/0245.html
This issue appeared in haproxy with commit 4b8852c70 ("BUG/MAJOR: h2:
verify that :path starts with a '/' before concatenating it") when
making the checks on :path fully comply with the spec, and was backported
as far as 2.0, so this fix must be backported there as well to allow
"//" in H2 again.
Most of the SSL sample fetches related to the client certificate were
based on the SSL_get_peer_certificate function which returns NULL when
the verification process failed. This made it impossible to use those
fetches in a log format since they would always be empty.
The patch adds a reference to the X509 object representing the client
certificate in the SSL structure and makes use of this reference in the
fetches.
The reference can only be obtained in ssl_sock_bind_verifycbk which
means that in case of an SSL error occurring before the verification
process ("no shared cipher" for instance, which happens while processing
the Client Hello), we won't ever start the verification process and it
will be impossible to get information about the client certificate.
This patch also allows most of the ssl_c_XXX fetches to return a usable
value in case of connection failure (because of a verification error for
instance) by making the "conn->flags & CO_FL_WAIT_XPRT" test (which
requires a connection to be established) less strict.
Thanks to this patch, a log-format such as the following should return
usable information in case of an error occurring during the verification
process :
log-format "DN=%{+Q}[ssl_c_s_dn] serial=%[ssl_c_serial,hex] \
hash=%[ssl_c_sha1,hex]"
It should answer to GitHub issue #693.
Change the User-Agent from "HAProxy HTTP client" to "HAProxy" as the
previous name is not valid according to RFC 7231#5.5.3.
This patch fixes issue #1354.
This commit implements an HTTP Client over the CLI, this was made as
working example for the HTTP Client API.
It usable over the CLI by specifying a method and an URL:
echo "httpclient GET http://127.0.0.1:8000/demo.file" | socat /tmp/haproxy.sock -
Only IP addresses are accessibles since the API does not allow to
resolve addresses yet.
This commit implements a very simple HTTP Client API.
A client can be operated by several functions:
- httpclient_new(), httpclient_destroy(): create
and destroy the struct httpclient instance.
- httpclient_req_gen(): generate a complete HTX request using the
the absolute URL, the method and a list of headers. This request
is complete and sets the HTX End of Message flag. This is limited
to small request we don't need a body.
- httpclient_start() fill a sockaddr storage with a IP extracted
from the URL (it cannot resolve an fqdm for now), start the
applet. It also stores the ptr of the caller which could be an
appctx or something else.
- hc->ops contains a list of callbacks used by the
HTTPClient, they should be filled manually after an
httpclient_new():
* res_stline(): the client received a start line, its content
will be stored in hc->res.vsn, hc->res.status, hc->res.reason
* res_headers(): the client received headers, they are stored in
hc->res.hdrs.
* res_payload(): the client received some payload data, they are
stored in the hc->res.buf buffer and could be extracted with the
httpclient_res_xfer() function, which takes a destination buffer
as a parameter
* res_end(): this callback is called once we finished to receive
the response.
